
| SNMPv2-SMI | DMTF-DMI-MIB |
| dmtf | 1.3.6.1.4.1.412 | ||
| OBJECT IDENTIFIER | |||
| dmtfStdMifs | 1.3.6.1.4.1.412.2 | ||
| OBJECT IDENTIFIER | |||
| dmtfMobileComputerMIF | 1.3.6.1.4.1.412.2.8 | ||
| This MIB is a translation of the DMTF Mobile Computer MIF, based on the translation rules defined by the DMTF DMI to SNMP Mapping Standard, Version 1.0. DMI-based systems running a DMI-to-SNMP Mapping Agent provide the ability to access DMI component instrumentation via SNMP protocol operations. | |||
| MODULE-IDENTITY | |||
| dmtfPortableBatteryTable | 1.3.6.1.4.1.412.2.8.1 | ||
| This group defines general information about the portable battery(s) in the system | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPortableBattery | |||
| dmtfPortableBatteryTraps | 1.3.6.1.4.1.412.2.8.1.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfPortableBatteryLowCombinedBatterysCharge | 1.3.6.1.4.1.412.2.8.1.0.1 | ||
| The combined charge of all batteries in the portable computer is running low. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPortableBatteryEvSys | |||
| dmtfPortableBatteryEvSub | |||
| dmtfPortableBatteryCriticalCombinedBatterysCharge | 1.3.6.1.4.1.412.2.8.1.0.2 | ||
| The combined charge of all batteries in the portable computer is critcally low. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPortableBatteryEvSys | |||
| dmtfPortableBatteryEvSub | |||
| dmtfPortableBatteryMaintenanceRequired | 1.3.6.1.4.1.412.2.8.1.0.3 | ||
| A battery in the portable computer is defective and requires maintenance. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPortableBatteryEvSys | |||
| dmtfPortableBatteryEvSub | |||
| dmtfPortableBatteryEntry | 1.3.6.1.4.1.412.2.8.1.1 | ||
| This group defines general information about the portable battery(s) in the system | |||
| OBJECT-TYPE | |||
| SdmtfPortableBattery | |||
| dmtfPortableBatteryState | 1.3.6.1.4.1.412.2.8.1.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| portableBatteryIndex | 1.3.6.1.4.1.412.2.8.1.1.1 | ||
| The index into the portable battery table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| portableBatteryLocation | 1.3.6.1.4.1.412.2.8.1.1.2 | ||
| The location of the battery | |||
| OBJECT-TYPE | |||
| DmiString | |||
| portableBatteryManufacturer | 1.3.6.1.4.1.412.2.8.1.1.3 | ||
| The name of the company that manufactured the battery. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| portableBatteryManufactureDate | 1.3.6.1.4.1.412.2.8.1.1.4 | ||
| The battery manufacture date. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| portableBatterySerialNumber | 1.3.6.1.4.1.412.2.8.1.1.5 | ||
| The serial number for this battery. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| portableBatteryDeviceName | 1.3.6.1.4.1.412.2.8.1.1.6 | ||
| Device name for this battery. For instance, Duracell DR-36. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| portableBatteryDeviceChemistry | 1.3.6.1.4.1.412.2.8.1.1.7 | ||
| The battery chemistry. For instance, Lithium-ion or Nickel metal hydride. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), leadAcid(3), nickelCadmium(4), nickelMetalHydride(5), lithiumIon(6), zincAir(7), lithiumPolymer(8) | ||
| portableBatteryDesignCapacity | 1.3.6.1.4.1.412.2.8.1.1.8 | ||
| The design capacity of the battery in mWatt-hours. If this attribute is not supported, value = 0x80000000 | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| portableBatteryDesignVoltage | 1.3.6.1.4.1.412.2.8.1.1.9 | ||
| The design voltage of the battery in mVolts. If this attribute is not supported, value = 0x80000000 | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| smartBatteryVersion | 1.3.6.1.4.1.412.2.8.1.1.10 | ||
| The Smart Battery Data Specification version number supported by this battery. If the battery does not support this function, the value should be left blank. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| fullChargeCapacity | 1.3.6.1.4.1.412.2.8.1.1.11 | ||
| The full charge capacity of the battery in mWatt-hours. Comparis n of this value to the battery Design Capacity determines when the battery requires replacement. The battery industry has defined a battery's end of life to be when the Full Charge Capacity falls below 80% of the Design Capacity. If this attribute is not supported, value = -1. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| remainingCapacity | 1.3.6.1.4.1.412.2.8.1.1.12 | ||
| The battery's remaining capacity in mWatt-hours. This value is used with Design Capacity or Full Charge Capacity to calculate fuel gauge information. If this attribute is not supported, value = -1. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| maximumError | 1.3.6.1.4.1.412.2.8.1.1.13 | ||
| The maximum error (as a percentage) in the Watt-hour data reported by the battery. The maximum error indicates the upper bound on how much additional energy the battery may have above the energy it reports having. When this value exceeds some value, for instance, 10%, some action must be taken (for instance, fully discharge then fully charge the battery) within some specified time (for instance, within two recharge cycles of the battery). If the action is not taken within the time frame, the error value | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| portableBatteryChargingStatus | 1.3.6.1.4.1.412.2.8.1.1.14 | ||
| The charging battery status | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), high(3), low(4), critical(5), charging(6), chargingAndHigh(7), chargingAndLow(8), chargingAndCritical(9), noSystemBattery(10) | ||
| remainingBatteryTime | 1.3.6.1.4.1.412.2.8.1.1.15 | ||
| The remaining battery time in minutes, at the current average system power consumption level. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| remainingTimeToFullBattery | 1.3.6.1.4.1.412.2.8.1.1.16 | ||
| The remaining time to charge the battery fully in minutes,at the current average system power consumption level and charging rate | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerUnitIndex | 1.3.6.1.4.1.412.2.8.1.1.17 | ||
| This is the ID of the Power Unit (logical portable battery) to which this Portable Battery belongs. This value matches up with the Power Unit Table Index attribute defined in the Power Unit Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfPortableBatteryEvSys | 1.3.6.1.4.1.412.2.8.1.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), system1(3), system2(4) | ||
| dmtfPortableBatteryEvSub | 1.3.6.1.4.1.412.2.8.1.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), subsystem1(3), subsystem2(4) | ||
| dmtfDynamicStatesTable | 1.3.6.1.4.1.412.2.8.2 | ||
| This group defines the dynamic states information in the portable system | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDynamicStates | |||
| dmtfDynamicStatesEntry | 1.3.6.1.4.1.412.2.8.2.1 | ||
| This group defines the dynamic states information in the portable system | |||
| OBJECT-TYPE | |||
| SdmtfDynamicStates | |||
| aCLineStatus | 1.3.6.1.4.1.412.2.8.2.1.1 | ||
| This group defines status information about the AC line in the notebook | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), offLine(3), onLine(4), onBackupPower(5) | ||
| dockingStatus | 1.3.6.1.4.1.412.2.8.2.1.2 | ||
| Defines whether system is docked or not | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), docked(3), notDocked(4) | ||
| dmtfVideoOutputDeviceTable | 1.3.6.1.4.1.412.2.8.3 | ||
| This group defines the attributes for video output devices | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfVideoOutputDevice | |||
| dmtfVideoOutputDeviceEntry | 1.3.6.1.4.1.412.2.8.3.1 | ||
| This group defines the attributes for video output devices | |||
| OBJECT-TYPE | |||
| SdmtfVideoOutputDevice | |||
| dmtfVideoOutputDeviceState | 1.3.6.1.4.1.412.2.8.3.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| index2 | 1.3.6.1.4.1.412.2.8.3.1.1 | ||
| Defines the index into the video output group | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| builtIn | 1.3.6.1.4.1.412.2.8.3.1.2 | ||
| Defines whether the video output device is built in | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), yes(3), no(4) | ||
| type2 | 1.3.6.1.4.1.412.2.8.3.1.3 | ||
| Defines the type of the video output device | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), cRT(3), tFT(4), sTN(5), dSTN(6) | ||
| colorSupport | 1.3.6.1.4.1.412.2.8.3.1.4 | ||
| Defines whether the video output device supports color | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), yes(3), no(4) | ||
| brightness | 1.3.6.1.4.1.412.2.8.3.1.5 | ||
| The percentage (0-100) of total brightness of the video output device. If feature not available, value = 0x80000000 | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| contrast | 1.3.6.1.4.1.412.2.8.3.1.6 | ||
| The percentage (0-100) of total contrast of the videooutput device. If feature not available, value = 0x80000000 | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| videoGroupReference | 1.3.6.1.4.1.412.2.8.3.1.7 | ||
| Defines the reference into the video group | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfInfraredPortTable | 1.3.6.1.4.1.412.2.8.4 | ||
| This group defines attributes for Infrared Ports | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfInfraredPort | |||
| dmtfInfraredPortEntry | 1.3.6.1.4.1.412.2.8.4.1 | ||
| This group defines attributes for Infrared Ports | |||
| OBJECT-TYPE | |||
| SdmtfInfraredPort | |||
| dmtfInfraredPortState | 1.3.6.1.4.1.412.2.8.4.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| iRIndex | 1.3.6.1.4.1.412.2.8.4.1.1 | ||
| Index to identify the IR port | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| iRLocation | 1.3.6.1.4.1.412.2.8.4.1.2 | ||
| Location of the IR window on the device | |||
| OBJECT-TYPE | |||
| DmiString | |||
| iREnableState | 1.3.6.1.4.1.412.2.8.4.1.3 | ||
| Defines whether IR is enabled or disabled | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4) | ||
| iRLimitSpeedEnable | 1.3.6.1.4.1.412.2.8.4.1.4 | ||
| Defines whether IR speed is limited or not. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4) | ||
| iRSpeedLimit | 1.3.6.1.4.1.412.2.8.4.1.5 | ||
| Defines connection speed limit of the IR port, in bits per second. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| iRPhysicalPortName | 1.3.6.1.4.1.412.2.8.4.1.6 | ||
| Defines the physical port that IR is connected to. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| iRVirtualCOMPortName | 1.3.6.1.4.1.412.2.8.4.1.7 | ||
| Defines the virtual COM port the IR is connected to. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| iRVirtualLPTPortName | 1.3.6.1.4.1.412.2.8.4.1.8 | ||
| Defines the virtual LPT port the IR is connected to. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| iRProtocol | 1.3.6.1.4.1.412.2.8.4.1.9 | ||
| Defines protocol used to establish the IR connection | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), sIR(3), fIR(4), mIR(5) | ||
| dmtfPointingDeviceTable | 1.3.6.1.4.1.412.2.8.5 | ||
| This group defines the characteristics of a pointing device. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPointingDevice | |||
| dmtfPointingDeviceEntry | 1.3.6.1.4.1.412.2.8.5.1 | ||
| This group defines the characteristics of a pointing device. | |||
| OBJECT-TYPE | |||
| SdmtfPointingDevice | |||
| pointingDeviceType | 1.3.6.1.4.1.412.2.8.5.1.1 | ||
| The type of this Pointing Device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), mouse(3), trackBall(4), trackPoint(5), glidePoint(6), touchPad(7) | ||
| pointingDeviceInterface | 1.3.6.1.4.1.412.2.8.5.1.2 | ||
| The interface type of this Pointing Device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), serial(3), pS2(4), infrared(5), hPHIL(6), busMouse(7), aDB(8), busMouseDB9(160), busMouseMicroDIN(161), uSB(162) | ||
| pointingDeviceIRQ | 1.3.6.1.4.1.412.2.8.5.1.3 | ||
| The IRQ number used by this Pointing Device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| pointingDeviceButtons | 1.3.6.1.4.1.412.2.8.5.1.4 | ||
| The number of Pointing Device buttons on this Pointing Device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| pointingDevicePortName | 1.3.6.1.4.1.412.2.8.5.1.5 | ||
| The name of the port currently being used by this Pointing Device. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| pointingDeviceDriverName | 1.3.6.1.4.1.412.2.8.5.1.6 | ||
| The name of the Pointing Device driver. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| pointingDeviceDriverVersion | 1.3.6.1.4.1.412.2.8.5.1.7 | ||
| The version number of the Pointing Device driver. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.8.5.1.8 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.8.5.1.9 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| securitySettings | 1.3.6.1.4.1.412.2.8.5.1.10 | ||
| Enum describing the current hardware security settings on this device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5) | ||
| dmtfSystemPowerManagementTable | 1.3.6.1.4.1.412.2.8.6 | ||
| This group defines system power management attributes | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemPowerManagement | |||
| dmtfSystemPowerManagementEntry | 1.3.6.1.4.1.412.2.8.6.1 | ||
| This group defines system power management attributes | |||
| OBJECT-TYPE | |||
| SdmtfSystemPowerManagement | |||
| powerManagementCapabilities | 1.3.6.1.4.1.412.2.8.6.1.1 | ||
| Defines what type of Power Management this system supports (i.e APM 1.2, ACPI 1.0) | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), aPM11(3), aPM12(4), aCPI10(5) | ||
| reducedCPUClockSpeed | 1.3.6.1.4.1.412.2.8.6.1.2 | ||
| Defines whether to enable CPU to slow down when possible | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4) | ||
| overrideAC | 1.3.6.1.4.1.412.2.8.6.1.3 | ||
| Enables/Disables power savings when AC is connected | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4) | ||
| ringEventResume | 1.3.6.1.4.1.412.2.8.6.1.4 | ||
| Enables system to resume operation when a modem ring occurs on a serial port or a wakeup occurs on a PC Card | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4) | ||
| alarmResume | 1.3.6.1.4.1.412.2.8.6.1.5 | ||
| Enables system to resume operation from suspend/standby mode at a time determined by an application program. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4) | ||
| dmtfPowerManagementTable | 1.3.6.1.4.1.412.2.8.7 | ||
| This group defines the power management state of components and groups within the system | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPowerManagementTable | |||
| dmtfPowerManagementEntry | 1.3.6.1.4.1.412.2.8.7.1 | ||
| This group defines the power management state of components and groups within the system | |||
| OBJECT-TYPE | |||
| SdmtfPowerManagementTable | |||
| dmtfPowerManagementTableState | 1.3.6.1.4.1.412.2.8.7.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| powerManagementEnabledDisabled | 1.3.6.1.4.1.412.2.8.7.1.1 | ||
| Enabled/Disabled state of power management on this device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4) | ||
| currentPowerManagementState | 1.3.6.1.4.1.412.2.8.7.1.2 | ||
| The current PM state (D0,D1,D2,D3). | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), d0WorkingFullyON(3), d1Sleeping(4), d2NonVolatileSleepSoftOff(5), d3OFF(6) | ||
| d1TimerValue | 1.3.6.1.4.1.412.2.8.7.1.3 | ||
| The time-out value in milliseconds to go from D0 (full ON) to D1 state. If D1 state is not supported the value is -1. If the transition is not controlled by a timer then the value is 0. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| d2TimerValue | 1.3.6.1.4.1.412.2.8.7.1.4 | ||
| The time-out value in milliseconds to go from the next higher supported state (either D0 or D1) to the D2 state. If D2 state is not supporte the value is -1. If the transition is not controlled by a timer then the value is 0. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| d3TimerValue | 1.3.6.1.4.1.412.2.8.7.1.5 | ||
| The time-out value in milliseconds to go from the next higher supported state (either D0, D1, or D2) to the D3 state. If D3 state is not supported the value is -1 meaning the device can never be turned off. If the transition is not controlled by a timer then the value is 0. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfPowerManagementBinaryAssociationTable | 1.3.6.1.4.1.412.2.8.8 | ||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPowerManagementBinaryAssociationTable | |||
| dmtfPowerManagementBinaryAssociationEntry | 1.3.6.1.4.1.412.2.8.8.1 | ||
| OBJECT-TYPE | |||
| SdmtfPowerManagementBinaryAssociationTable | |||
| dmtfPowerManagementBinaryAssociationTableState | 1.3.6.1.4.1.412.2.8.8.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| index | 1.3.6.1.4.1.412.2.8.8.1.1 | ||
| OBJECT-TYPE | |||
| DmiInteger | |||
| type | 1.3.6.1.4.1.412.2.8.8.1.2 | ||
| OBJECT-TYPE | |||
| DmiString | |||
| ref1 | 1.3.6.1.4.1.412.2.8.8.1.3 | ||
| OBJECT-TYPE | |||
| DmiString | |||
| ref2 | 1.3.6.1.4.1.412.2.8.8.1.4 | ||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfDeviceBayTable | 1.3.6.1.4.1.412.2.8.9 | ||
| This group defines device bays characteristics | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDeviceBay | |||
| dmtfDeviceBayEntry | 1.3.6.1.4.1.412.2.8.9.1 | ||
| This group defines device bays characteristics | |||
| OBJECT-TYPE | |||
| SdmtfDeviceBay | |||
| dmtfDeviceBayState | 1.3.6.1.4.1.412.2.8.9.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| deviceBayIndex | 1.3.6.1.4.1.412.2.8.9.1.1 | ||
| Defines an index for the device bays in the system | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceBayType | 1.3.6.1.4.1.412.2.8.9.1.2 | ||
| Defines the type of Device Bay. Examples of Proprietary Bay are: Swappable Bay, Multi-Function Bay and Media Bay Types | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), proprietaryBay(3), standardDesktopDeviceBay(4), standardMobileDeviceBay(5), standardUltraMobileDeviceBay(6) | ||
| deviceBayLocation | 1.3.6.1.4.1.412.2.8.9.1.3 | ||
| Defines the physical location of the device bay | |||
| OBJECT-TYPE | |||
| DmiString | |||
| devicesSupported | 1.3.6.1.4.1.412.2.8.9.1.4 | ||
| Defines a string containing a list of devices supported in this bay separated by commas. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| deviceCurrentlyAttached | 1.3.6.1.4.1.412.2.8.9.1.5 | ||
| Defines the name of the device currently attached to this bay | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfDynOids | 1.3.6.1.4.1.412.3 | ||
| OBJECT IDENTIFIER | |||
| DmiCounter | |||
| Counter32 | |||
| DmiCounter64 | |||
| Counter64 | |||
| DmiGauge | |||
| Gauge32 | |||
| DmiInteger | |||
| Integer32 | |||
| DmiOctetstring | |||
| OCTET STRING | |||
| DmiCompId | |||
| INTEGER | |||
| DmiGroupId | |||
| INTEGER | |||
| SdmtfDeviceBay | |||
| SEQUENCE | |||
| INTEGER as dmtfDeviceBayState | |||
| DmiInteger as deviceBayIndex | |||
| DmiInteger as deviceBayType | |||
| DmiString as deviceBayLocation | |||
| DmiString as devicesSupported | |||
| DmiString as deviceCurrentlyAttached | |||
| SdmtfDynamicStates | |||
| SEQUENCE | |||
| DmiInteger as aCLineStatus | |||
| DmiInteger as dockingStatus | |||
| SdmtfInfraredPort | |||
| SEQUENCE | |||
| INTEGER as dmtfInfraredPortState | |||
| DmiInteger as iRIndex | |||
| DmiString as iRLocation | |||
| DmiInteger as iREnableState | |||
| DmiInteger as iRLimitSpeedEnable | |||
| DmiInteger as iRSpeedLimit | |||
| DmiString as iRPhysicalPortName | |||
| DmiString as iRVirtualCOMPortName | |||
| DmiString as iRVirtualLPTPortName | |||
| DmiInteger as iRProtocol | |||
| SdmtfPointingDevice | |||
| SEQUENCE | |||
| DmiInteger as pointingDeviceType | |||
| DmiInteger as pointingDeviceInterface | |||
| DmiInteger as pointingDeviceIRQ | |||
| DmiInteger as pointingDeviceButtons | |||
| DmiString as pointingDevicePortName | |||
| DmiString as pointingDeviceDriverName | |||
| DmiString as pointingDeviceDriverVersion | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as securitySettings | |||
| SdmtfPortableBattery | |||
| SEQUENCE | |||
| INTEGER as dmtfPortableBatteryState | |||
| DmiInteger as portableBatteryIndex | |||
| DmiString as portableBatteryLocation | |||
| DmiString as portableBatteryManufacturer | |||
| DmiDate as portableBatteryManufactureDate | |||
| DmiString as portableBatterySerialNumber | |||
| DmiString as portableBatteryDeviceName | |||
| DmiInteger as portableBatteryDeviceChemistry | |||
| DmiInteger as portableBatteryDesignCapacity | |||
| DmiInteger as portableBatteryDesignVoltage | |||
| DmiString as smartBatteryVersion | |||
| DmiInteger as fullChargeCapacity | |||
| DmiInteger as remainingCapacity | |||
| DmiInteger as maximumError | |||
| DmiInteger as portableBatteryChargingStatus | |||
| DmiInteger as remainingBatteryTime | |||
| DmiInteger as remainingTimeToFullBattery | |||
| DmiInteger as powerUnitIndex | |||
| SdmtfPowerManagementBinaryAssociationTable | |||
| SEQUENCE | |||
| INTEGER as dmtfPowerManagementBinaryAssociationTableState | |||
| DmiInteger as index-1 | |||
| DmiString as type | |||
| DmiString as ref1 | |||
| DmiString as ref2 | |||
| SdmtfPowerManagementTable | |||
| SEQUENCE | |||
| INTEGER as dmtfPowerManagementTableState | |||
| DmiInteger as powerManagementEnabledDisabled | |||
| DmiInteger as currentPowerManagementState | |||
| DmiInteger as d1TimerValue | |||
| DmiInteger as d2TimerValue | |||
| DmiInteger as d3TimerValue | |||
| SdmtfSystemPowerManagement | |||
| SEQUENCE | |||
| DmiInteger as powerManagementCapabilities | |||
| DmiInteger as reducedCPUClockSpeed | |||
| DmiInteger as overrideAC | |||
| DmiInteger as ringEventResume | |||
| DmiInteger as alarmResume | |||
| SdmtfVideoOutputDevice | |||
| SEQUENCE | |||
| INTEGER as dmtfVideoOutputDeviceState | |||
| DmiInteger as index | |||
| DmiInteger as builtIn | |||
| DmiInteger as type-1 | |||
| DmiInteger as colorSupport | |||
| DmiInteger as brightness | |||
| DmiInteger as contrast | |||
| DmiString as videoGroupReference | |||