
| SNMPv2-SMI | DMTF-DMI-MIB |
| dmtf | 1.3.6.1.4.1.412 | ||
| OBJECT IDENTIFIER | |||
| dmtfStdMifs | 1.3.6.1.4.1.412.2 | ||
| OBJECT IDENTIFIER | |||
| dmtfSystemsMIF | 1.3.6.1.4.1.412.2.4 | ||
| This MIB is a translation of the DMTF Systems MIF based on the translation rules defined by the DMTF DMI to SNMP Mapping Standard, Version 1.0. DMI-based systems running a DMI-to-SNMP Mapping Agent provide the ability to access DMI component instrumentation via SNMP protocol operations. | |||
| MODULE-IDENTITY | |||
| dmtfGeneralInformationTable | 1.3.6.1.4.1.412.2.4.1 | ||
| This group defines general information about this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfGeneralInformation | |||
| dmtfGeneralInformationEntry | 1.3.6.1.4.1.412.2.4.1.1 | ||
| This group defines general information about this system. | |||
| OBJECT-TYPE | |||
| SdmtfGeneralInformation | |||
| systemName | 1.3.6.1.4.1.412.2.4.1.1.1 | ||
| A name to identify this system. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| systemLocation | 1.3.6.1.4.1.412.2.4.1.1.2 | ||
| The physical location of this system. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| systemPrimaryUserName | 1.3.6.1.4.1.412.2.4.1.1.3 | ||
| The name of the primary user or owner of this system. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| systemPrimaryUserPhone | 1.3.6.1.4.1.412.2.4.1.1.4 | ||
| The phone number of the primary user of this system. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| systemBootupTime | 1.3.6.1.4.1.412.2.4.1.1.5 | ||
| The time at which the system was last booted. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| systemDateTime | 1.3.6.1.4.1.412.2.4.1.1.6 | ||
| The actual system date and time. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| dmtfOperatingSystemTable | 1.3.6.1.4.1.412.2.4.2 | ||
| This group defines general information about operating systems installed on this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfOperatingSystem | |||
| dmtfOperatingSystemEntry | 1.3.6.1.4.1.412.2.4.2.1 | ||
| This group defines general information about operating systems installed on this system. | |||
| OBJECT-TYPE | |||
| SdmtfOperatingSystem | |||
| dmtfOperatingSystemState | 1.3.6.1.4.1.412.2.4.2.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| operatingSystemIndex | 1.3.6.1.4.1.412.2.4.2.1.1 | ||
| The index into the operating system table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operatingSystemName | 1.3.6.1.4.1.412.2.4.2.1.2 | ||
| The name of this operating system. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| operatingSystemVersion | 1.3.6.1.4.1.412.2.4.2.1.3 | ||
| The version number of this operating system. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| primaryOperatingSystem | 1.3.6.1.4.1.412.2.4.2.1.4 | ||
| If true, this is the primary operating system. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| operatingSystemBootDeviceStorageType | 1.3.6.1.4.1.412.2.4.2.1.5 | ||
| An index into the Disks Table to indicate the device from which this operating system was booted. To fully access the Disks Table, this index must be combined with the attribute Boot Device Index. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), hardDisk(3), floppyDisk(4), opticalROM(5), opticalWORM(6), opticalRW(7), compactDisk(8), flashDisk(9), bernoulli(10), opticalFloppyDisk(11) | ||
| operatingSystemBootDeviceIndex | 1.3.6.1.4.1.412.2.4.2.1.6 | ||
| An index into the Disks Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operatingSystemBootPartitionIndex | 1.3.6.1.4.1.412.2.4.2.1.7 | ||
| An index into the Partition table indicating the partition from which this operating system booted. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operatingSystemDescription | 1.3.6.1.4.1.412.2.4.2.1.8 | ||
| A description of this operating system. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfSystemBIOSTable | 1.3.6.1.4.1.412.2.4.3 | ||
| This group defines the attributes for the System BIOS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemBIOS | |||
| dmtfSystemBIOSEntry | 1.3.6.1.4.1.412.2.4.3.1 | ||
| This group defines the attributes for the System BIOS. | |||
| OBJECT-TYPE | |||
| SdmtfSystemBIOS | |||
| dmtfSystemBIOSState | 1.3.6.1.4.1.412.2.4.3.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| bIOSIndex | 1.3.6.1.4.1.412.2.4.3.1.1 | ||
| The index into the system BIOS table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| bIOSManufacturer | 1.3.6.1.4.1.412.2.4.3.1.2 | ||
| The name of the company that wrote this System BIOS. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| bIOSVersion | 1.3.6.1.4.1.412.2.4.3.1.3 | ||
| The version number or version string of this BIOS. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| bIOSROMSize | 1.3.6.1.4.1.412.2.4.3.1.4 | ||
| The physical size of this BIOS ROM device in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| bIOSStartingAddress | 1.3.6.1.4.1.412.2.4.3.1.5 | ||
| The starting physical address for the memory which the BIOS occupies. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| bIOSEndingAddress | 1.3.6.1.4.1.412.2.4.3.1.6 | ||
| The ending physical address for the memory which the BIOS occupies. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| bIOSLoaderVersion | 1.3.6.1.4.1.412.2.4.3.1.7 | ||
| The BIOS flash loader version number or string. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| bIOSReleaseDate | 1.3.6.1.4.1.412.2.4.3.1.8 | ||
| The BIOS release date. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| primaryBIOS | 1.3.6.1.4.1.412.2.4.3.1.9 | ||
| If true, this is the primary System BIOS. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| dmtfBIOSCharacteristicTable | 1.3.6.1.4.1.412.2.4.4 | ||
| This group defines the characteristics of the System BIOS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfBIOSCharacteristic | |||
| dmtfBIOSCharacteristicEntry | 1.3.6.1.4.1.412.2.4.4.1 | ||
| This group defines the characteristics of the System BIOS. | |||
| OBJECT-TYPE | |||
| SdmtfBIOSCharacteristic | |||
| dmtfBIOSCharacteristicState | 1.3.6.1.4.1.412.2.4.4.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| bIOSCharacteristicIndex | 1.3.6.1.4.1.412.2.4.4.1.1 | ||
| This is an index into the BIOS Characteristics table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| bIOSNumber | 1.3.6.1.4.1.412.2.4.4.1.2 | ||
| The BIOS number, which correlates to the BIOS Index attribute in the System BIOS group. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| bIOSCharacteristic | 1.3.6.1.4.1.412.2.4.4.1.3 | ||
| The different features supported by this version of the BIOS. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), unsupported(3), iSASupport(4), mCASupport(5), eISASupport(6), pCISupport(7), pCMCIASupport(8), pnPSupport(9), aPMSupport(10), upgradeableBIOS(11), bIOSShadowingAllowed(12), vLVESASupport(13), eSCDSupport(14), lS120Support(15), aCPISupport(16), i2OBootSupport(17), uSBLegacySupport(18), aGPSupport(19), pCCard(20), iR(21), x1394(22), i2C(23), smartBattery(24), pC98(160) | ||
| bIOSCharacteristicDescription | 1.3.6.1.4.1.412.2.4.4.1.4 | ||
| An expanded description of this BIOS Characteristic. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfProcessorTable | 1.3.6.1.4.1.412.2.4.5 | ||
| This group defines the attributes for each and every processor installed in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfProcessor | |||
| dmtfProcessorTraps | 1.3.6.1.4.1.412.2.4.5.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfProcessorFailure | 1.3.6.1.4.1.412.2.4.5.0.1 | ||
| A processor in the system has failed | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfProcessorEvSys | |||
| dmtfProcessorEvSub | |||
| dmtfProcessorSystemUp | 1.3.6.1.4.1.412.2.4.5.0.2 | ||
| A system processor is now up and running. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfProcessorEvSys | |||
| dmtfProcessorEvSub | |||
| dmtfProcessorInitializationFailure | 1.3.6.1.4.1.412.2.4.5.0.3 | ||
| A system processor failed to initialize properly during system startup. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfProcessorEvSys | |||
| dmtfProcessorEvSub | |||
| dmtfProcessorConfigurationError | 1.3.6.1.4.1.412.2.4.5.0.4 | ||
| A system processor is not properly configured | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfProcessorEvSys | |||
| dmtfProcessorEvSub | |||
| dmtfProcessorEntry | 1.3.6.1.4.1.412.2.4.5.1 | ||
| This group defines the attributes for each and every processor installed in this system. | |||
| OBJECT-TYPE | |||
| SdmtfProcessor | |||
| dmtfProcessorState | 1.3.6.1.4.1.412.2.4.5.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| processorIndex | 1.3.6.1.4.1.412.2.4.5.1.1 | ||
| An index into the processor table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| processorType | 1.3.6.1.4.1.412.2.4.5.1.2 | ||
| The type of processor currently in the system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), centralProcessor(3), mathProcessor(4), dSPProcessor(5), videoProcessor(6) | ||
| processorFamily | 1.3.6.1.4.1.412.2.4.5.1.3 | ||
| The family of processors to which this processor belongs. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8086(3), x80286(4), x80386(5), x80486(6), x8087(7), x80287(8), x80387(9), x80487(10), pentiumFamily(11), pentiumPro(12), pentiumII(13), pentiumMMX(14), m1Family(18), k5Family(25), powerPCFamily(32), powerPC601(33), powerPC603(34), powerPC603-1(35), powerPC604(36), alphaFamily(48), mIPSFamily(64), sPARCFamily(80), x68040(96), x68xxxFamily(97), x68000(98), x68010(99), x68020(100), x68030(101), hobbitFamily(112), weitek(128), pARISCFamily(144), v30Family(160) | ||
| processorVersionInformation | 1.3.6.1.4.1.412.2.4.5.1.4 | ||
| The version number or string for this processor. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| maximumSpeed | 1.3.6.1.4.1.412.2.4.5.1.5 | ||
| The maximum speed (in MHz) of this processor. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentSpeed | 1.3.6.1.4.1.412.2.4.5.1.6 | ||
| The current speed (in MHz) of this processor. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| processorUpgrade | 1.3.6.1.4.1.412.2.4.5.1.7 | ||
| The method by which this processor can be upgraded, if upgrades are supported. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), daughterBoard(3), zIFSocket(4), replacementPiggyBack(5), none(6), lIFSocket(7), slot1(8) | ||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.5.1.8 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.5.1.9 | ||
| The index into the Operational State Table for this device if applicable. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| level1CacheIndex | 1.3.6.1.4.1.412.2.4.5.1.10 | ||
| An index into the System Cache table that identifies the entry that describes the L1 cache for this processor. If more than one processor points to the same cache entry this means they share that cache. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| level2CacheIndex | 1.3.6.1.4.1.412.2.4.5.1.11 | ||
| An index into the System Cache table that identifies the entry that describes the L2 cache for this processor If more than one processor points to the same cache entry this means they share that cache. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| level3CacheIndex | 1.3.6.1.4.1.412.2.4.5.1.12 | ||
| An index into the System Cache table that identifies the entry that describes the L3 cache for this processor. If more than one processor points to the same cache entry this means they share that cache. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfProcessorEvSys | 1.3.6.1.4.1.412.2.4.5.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfProcessorEvSub | 1.3.6.1.4.1.412.2.4.5.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfMotherboardTable | 1.3.6.1.4.1.412.2.4.6 | ||
| This group defines attributes for the motherboard. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMotherboard | |||
| dmtfMotherboardTraps | 1.3.6.1.4.1.412.2.4.6.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfMotherboardProcessorFailure | 1.3.6.1.4.1.412.2.4.6.0.1 | ||
| A processor on the system motherboard has failed or been fixed according to the event severity indicated. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMotherboardEvSys | |||
| dmtfMotherboardEvSub | |||
| dmtfMotherboardPhysicalDeviceStatusChange | 1.3.6.1.4.1.412.2.4.6.0.2 | ||
| The motherboard physical status has changed according to the event severity indicated. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMotherboardEvSys | |||
| dmtfMotherboardEvSub | |||
| dmtfMotherboardMemoryError | 1.3.6.1.4.1.412.2.4.6.0.3 | ||
| A memory module on the system's motherboard has failed. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMotherboardEvSys | |||
| dmtfMotherboardEvSub | |||
| dmtfMotherboardSystemUp | 1.3.6.1.4.1.412.2.4.6.0.4 | ||
| The system's motherboard reports it has started-up successfully. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMotherboardEvSys | |||
| dmtfMotherboardEvSub | |||
| dmtfMotherboardInitializationFailure | 1.3.6.1.4.1.412.2.4.6.0.5 | ||
| The system's motherboard has failed to initialize properly during system startup. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMotherboardEvSys | |||
| dmtfMotherboardEvSub | |||
| dmtfMotherboardConfigurationError | 1.3.6.1.4.1.412.2.4.6.0.6 | ||
| The system's motherboard is not properly configured | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMotherboardEvSys | |||
| dmtfMotherboardEvSub | |||
| dmtfMotherboardEntry | 1.3.6.1.4.1.412.2.4.6.1 | ||
| This group defines attributes for the motherboard. | |||
| OBJECT-TYPE | |||
| SdmtfMotherboard | |||
| numberOfExpansionSlots | 1.3.6.1.4.1.412.2.4.6.1.1 | ||
| The total number of expansion slots which physically exist on the motherboard whether occupied or not (see System Slots group). | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.6.1.2 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.6.1.3 | ||
| The index into the Operational State Table for this device if applicable. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfMotherboardEvSys | 1.3.6.1.4.1.412.2.4.6.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfMotherboardEvSub | 1.3.6.1.4.1.412.2.4.6.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfPhysicalMemoryTable | 1.3.6.1.4.1.412.2.4.7 | ||
| The physical attributes for system memory and any add-on memory installed in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPhysicalMemory | |||
| dmtfPhysicalMemoryEntry | 1.3.6.1.4.1.412.2.4.7.1 | ||
| The physical attributes for system memory and any add-on memory installed in this system. | |||
| OBJECT-TYPE | |||
| SdmtfPhysicalMemory | |||
| dmtfPhysicalMemoryState | 1.3.6.1.4.1.412.2.4.7.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| physicalMemoryIndex | 1.3.6.1.4.1.412.2.4.7.1.1 | ||
| An index into the physical memory table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| physicalMemoryLocation | 1.3.6.1.4.1.412.2.4.7.1.2 | ||
| The location of the memory modules, whether on the system board or an add-on board. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), systemBoardOrMotherboard(3), iSAAddOnCard(4), eISAAddOnCard(5), pCIAddOnCard(6), mCAAddOnCard(7), pCMCIAAddOnCard(8), proprietaryAddOnCard(9), nuBus(16), pC98C20AddOnCard(160), pC98C24AddOnCard(161), pC98EAddOnCard(162), pC98LocalBusAddOnCard(163), pC98CardSlotAddOnCard(164) | ||
| memoryStartingAddress | 1.3.6.1.4.1.412.2.4.7.1.3 | ||
| The starting physical address mapped by this memory component. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| memoryEndingAddress | 1.3.6.1.4.1.412.2.4.7.1.4 | ||
| The ending physical address mapped by this memory component. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| memoryUsage | 1.3.6.1.4.1.412.2.4.7.1.5 | ||
| What this memory component is used for. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), systemMemory(3), videoMemory(4), flashMemory(5), nonVolatileRAM(6) | ||
| maximumMemoryCapacity | 1.3.6.1.4.1.412.2.4.7.1.6 | ||
| The maximum memory capacity, in megabytes, on this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfSIMMSlots | 1.3.6.1.4.1.412.2.4.7.1.7 | ||
| The number of SIMM slots available for this type of memory on this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfSIMMSlotsUsed | 1.3.6.1.4.1.412.2.4.7.1.8 | ||
| The number of SIMM slots in use for this type of memory on this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memorySpeed | 1.3.6.1.4.1.412.2.4.7.1.9 | ||
| The speed of this memory component in nanoseconds. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryErrorCorrection | 1.3.6.1.4.1.412.2.4.7.1.10 | ||
| The main error correction scheme supported by this memory component. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), parity(4), singleBitECC(5), multiBitECC(6) | ||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.7.1.11 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.7.1.12 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| maximumMemoryCapacityFractionalPart | 1.3.6.1.4.1.412.2.4.7.1.13 | ||
| Maximum memory capacity fractional part in bytes. This plus the 'Maximum Memory Capacity' attribute gives the total maximum memory capacity. Rationale: the units for the 'Maximum Memory Capacity'attribute (i.e. megabytes) could not be corrected to kilobytes for reasons of backward compatibility. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfLogicalMemoryTable | 1.3.6.1.4.1.412.2.4.8 | ||
| This group defines the logical memory attributes for system memory and any add-on memory installed in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfLogicalMemory | |||
| dmtfLogicalMemoryTraps | 1.3.6.1.4.1.412.2.4.8.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfLogicalMemoryError | 1.3.6.1.4.1.412.2.4.8.0.1 | ||
| A an error has occured in the system's logical memory space. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfLogicalMemoryEvSys | |||
| dmtfLogicalMemoryEvSub | |||
| dmtfLogicalMemoryInitializationFailure | 1.3.6.1.4.1.412.2.4.8.0.2 | ||
| An error occured while initializing the system's memory. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfLogicalMemoryEvSys | |||
| dmtfLogicalMemoryEvSub | |||
| dmtfLogicalMemoryEntry | 1.3.6.1.4.1.412.2.4.8.1 | ||
| This group defines the logical memory attributes for system memory and any add-on memory installed in this system. | |||
| OBJECT-TYPE | |||
| SdmtfLogicalMemory | |||
| baseMemorySize | 1.3.6.1.4.1.412.2.4.8.1.1 | ||
| The total size of the base memory in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| freeBaseMemorySize | 1.3.6.1.4.1.412.2.4.8.1.2 | ||
| The size of free base memory in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| extendedMemorySize | 1.3.6.1.4.1.412.2.4.8.1.3 | ||
| The total size of the extended memory in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| freeExtendedMemorySize | 1.3.6.1.4.1.412.2.4.8.1.4 | ||
| The size of free extended memory in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| extendedMemoryManagerName | 1.3.6.1.4.1.412.2.4.8.1.5 | ||
| The name of the extended memory manager. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| extendedMemoryManagerVersion | 1.3.6.1.4.1.412.2.4.8.1.6 | ||
| The version information of the extended memory manager. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| expandedMemorySize | 1.3.6.1.4.1.412.2.4.8.1.7 | ||
| The total size of the expanded memory in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| freeExpandedMemorySize | 1.3.6.1.4.1.412.2.4.8.1.8 | ||
| The size of free expanded memory in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| expandedMemoryManagerName | 1.3.6.1.4.1.412.2.4.8.1.9 | ||
| The name of the expanded memory manager. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| expandedMemoryManagerVersion | 1.3.6.1.4.1.412.2.4.8.1.10 | ||
| The version information of the expanded memory manager. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| expandedMemoryPageFrameAddress | 1.3.6.1.4.1.412.2.4.8.1.11 | ||
| The starting physical address of the expanded memory pageframe. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| expandedMemoryPageFrameSize | 1.3.6.1.4.1.412.2.4.8.1.12 | ||
| The size in kilobytes of the expanded memory page frame. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| expandedMemoryPageSize | 1.3.6.1.4.1.412.2.4.8.1.13 | ||
| The size in kilobytes of an expanded memory page, as opposed to the expanded memory page frame, which consists of a number of memory pages. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfLogicalMemoryEvSys | 1.3.6.1.4.1.412.2.4.8.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfLogicalMemoryEvSub | 1.3.6.1.4.1.412.2.4.8.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfSystemCacheTable | 1.3.6.1.4.1.412.2.4.9 | ||
| This group defines the attributes for different System Caches installed in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemCache | |||
| dmtfSystemCacheTraps | 1.3.6.1.4.1.412.2.4.9.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfSystemCacheMemoryError | 1.3.6.1.4.1.412.2.4.9.0.1 | ||
| A memory module in the system cache failed. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfSystemCacheEvSys | |||
| dmtfSystemCacheEvSub | |||
| dmtfSystemCacheInitializationFailure | 1.3.6.1.4.1.412.2.4.9.0.2 | ||
| The System Cache failed to initialize properly during system startup. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfSystemCacheEvSys | |||
| dmtfSystemCacheEvSub | |||
| dmtfSystemCacheEntry | 1.3.6.1.4.1.412.2.4.9.1 | ||
| This group defines the attributes for different System Caches installed in this system. | |||
| OBJECT-TYPE | |||
| SdmtfSystemCache | |||
| dmtfSystemCacheState | 1.3.6.1.4.1.412.2.4.9.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemCacheIndex | 1.3.6.1.4.1.412.2.4.9.1.1 | ||
| An index into the System Cache table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemCacheLevel | 1.3.6.1.4.1.412.2.4.9.1.2 | ||
| Is this the primary System Cache, or a subsidiary cache? | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), primary(3), secondary(4), tertiary(5) | ||
| systemCacheSpeed | 1.3.6.1.4.1.412.2.4.9.1.3 | ||
| The speed of this System Cache module in nanoseconds. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemCacheSize | 1.3.6.1.4.1.412.2.4.9.1.4 | ||
| The size of this System Cache module in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemCacheWritePolicy | 1.3.6.1.4.1.412.2.4.9.1.5 | ||
| Is this a write-back or a write-through cache? | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), writeBack(3), writeThrough(4), variesWithAddress(5) | ||
| systemCacheErrorCorrection | 1.3.6.1.4.1.412.2.4.9.1.6 | ||
| The error correction scheme supported by this cache component. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), parity(4), singleBitECC(5), multiBitECC(6) | ||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.9.1.7 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.9.1.8 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemCacheType | 1.3.6.1.4.1.412.2.4.9.1.9 | ||
| This defines the system cache type. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), instruction(3), data(4), unified(5) | ||
| lineSize | 1.3.6.1.4.1.412.2.4.9.1.10 | ||
| The size, in bytes, of a single cache bucket or line. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| volatility | 1.3.6.1.4.1.412.2.4.9.1.11 | ||
| This defines the volatility of the cache. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), temporaryVolatile(3), volatile(4), permanentNonVolatile(5), temporaryNonVolatile(6), uPSNonVolatile(7) | ||
| replacementPolicy | 1.3.6.1.4.1.412.2.4.9.1.12 | ||
| The algorithm used by the cache to determine which cache lines or buckets should be re-used. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), leastRecentlyUsedLRU(3), firstInFirstOutFIFO(4), lastInFirstOutLIFO(5), leastFrequentlyUsedLFU(6), mostFrequentlyUsedMFU(7) | ||
| readPolicy | 1.3.6.1.4.1.412.2.4.9.1.13 | ||
| The policy that shall be employed by the cache for handling read requests. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), read(3), readAhead(4), readAndReadAhead(5) | ||
| flushTimer | 1.3.6.1.4.1.412.2.4.9.1.14 | ||
| The maximum amount of time, in seconds, dirty lines or buckets may remain in the cache before they are flushed. A value of zero indicated that a cache flush is not controlled by a flushing timer. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| associativity | 1.3.6.1.4.1.412.2.4.9.1.15 | ||
| This defines the system cache associativity (direct-mapped, 2-way, 4-way, etc). | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), directMapped(3), x2WaySetAssociative(4), x4WaySetAssociative(5), fullyAssociative(6) | ||
| dmtfSystemCacheEvSys | 1.3.6.1.4.1.412.2.4.9.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfSystemCacheEvSub | 1.3.6.1.4.1.412.2.4.9.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfParallelPortsTable | 1.3.6.1.4.1.412.2.4.10 | ||
| This group defines the attributes for parallel ports in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfParallelPorts | |||
| dmtfParallelPortsEntry | 1.3.6.1.4.1.412.2.4.10.1 | ||
| This group defines the attributes for parallel ports in this system. | |||
| OBJECT-TYPE | |||
| SdmtfParallelPorts | |||
| dmtfParallelPortsState | 1.3.6.1.4.1.412.2.4.10.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| parallelPortIndex | 1.3.6.1.4.1.412.2.4.10.1.1 | ||
| An index into the parallel ports table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| parallelBaseIOAddress | 1.3.6.1.4.1.412.2.4.10.1.2 | ||
| Base I/O address for this parallel port. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| iRQUsed | 1.3.6.1.4.1.412.2.4.10.1.3 | ||
| IRQ number that is being used by this parallel port. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalName | 1.3.6.1.4.1.412.2.4.10.1.4 | ||
| The logical name of the I/O device on this parallel port, under this operating environment. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| connectorType | 1.3.6.1.4.1.412.2.4.10.1.5 | ||
| The connector used to interface with the I/O device on this parallel port. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dB25Female(3), dB25Male(4), centronics(5), miniCentronics(6), proprietary(7), centronics14(160), dB36Female(161), miniCentronics20(162) | ||
| connectorPinout | 1.3.6.1.4.1.412.2.4.10.1.6 | ||
| The pinout used by the I/O device on this parallel port. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), xTAT(3), pS2(4), iEEE1284(5), proprietary(6), pC98(160), pC98Hireso(161), pCH98(162), pC98Note(163), pC98Full(164) | ||
| dMASupport | 1.3.6.1.4.1.412.2.4.10.1.7 | ||
| If true, DMA is supported. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| parallelPortCapabilities | 1.3.6.1.4.1.412.2.4.10.1.8 | ||
| Capabilities of this parallel port. This is a bit field mask with the bits defined as follows: Bit 0 (2^0) set = XT/AT compatible, Bit 1 (2^1) set = PS/2 compatible, Bit 2 (2^2) set = ECP, Bit 3 (2^3) set = EPP, Bit 4 (2^4) set = PC-98, Bit 5 (2^5) set = PC-98-Hireso, Bit 6 (2^6) set = PC-H98 | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.10.1.9 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| parallelPortSecuritySettings | 1.3.6.1.4.1.412.2.4.10.1.10 | ||
| Attribute describing the current hardware security settings on this device | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5), bootBypass(6) | ||
| dmtfSerialPortsTable | 1.3.6.1.4.1.412.2.4.11 | ||
| This group defines the attributes for serial ports in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSerialPorts | |||
| dmtfSerialPortsEntry | 1.3.6.1.4.1.412.2.4.11.1 | ||
| This group defines the attributes for serial ports in this system. | |||
| OBJECT-TYPE | |||
| SdmtfSerialPorts | |||
| dmtfSerialPortsState | 1.3.6.1.4.1.412.2.4.11.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| serialPortIndex | 1.3.6.1.4.1.412.2.4.11.1.1 | ||
| An index into the serial ports table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| serialBaseIOAddress | 1.3.6.1.4.1.412.2.4.11.1.2 | ||
| Base I/O address for this serial port. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| iRQUsed | 1.3.6.1.4.1.412.2.4.11.1.3 | ||
| IRQ number that is being used by this serial port. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalName | 1.3.6.1.4.1.412.2.4.11.1.4 | ||
| The logical name of this serial port under this operating environment. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| connectorType | 1.3.6.1.4.1.412.2.4.11.1.5 | ||
| The connector used to interface with the I/O device on this serial port. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dB9PinMale(3), dB9PinFemale(4), dB25PinMale(5), dB25PinFemale(6), rJ11(7), rJ45(8), proprietary(9), circularDIN8Male(10), circularDIN8Female(11), miniCentronicsType14(160), miniCentronicsType26(161) | ||
| maximumSpeed | 1.3.6.1.4.1.412.2.4.11.1.6 | ||
| Maximum transfer speed of the device on this serial port in bits per second. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| serialPortCapabilities | 1.3.6.1.4.1.412.2.4.11.1.7 | ||
| The capabilities of this Serial port. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), xTATCompatible(3), x16450Compatible(4), x16550Compatible(5), x16550ACompatible(6), x8251Compatible(160), x8251FIFOCompatible(161) | ||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.11.1.8 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| serialPortSecuritySettings | 1.3.6.1.4.1.412.2.4.11.1.9 | ||
| Attribute describing the current hardware security settings on this device | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5), bootBypass(6) | ||
| dmtfIRQTable | 1.3.6.1.4.1.412.2.4.12 | ||
| This group defines attributes for IRQs in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfIRQ | |||
| dmtfIRQEntry | 1.3.6.1.4.1.412.2.4.12.1 | ||
| This group defines attributes for IRQs in this system. | |||
| OBJECT-TYPE | |||
| SdmtfIRQ | |||
| dmtfIRQState | 1.3.6.1.4.1.412.2.4.12.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| iRQNumber | 1.3.6.1.4.1.412.2.4.12.1.1 | ||
| The number of this IRQ. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| iRQAvailability | 1.3.6.1.4.1.412.2.4.12.1.2 | ||
| Is this IRQ available or in use? | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), available(3), inUse(4) | ||
| iRQTriggerType | 1.3.6.1.4.1.412.2.4.12.1.3 | ||
| The trigger type of the IRQ. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), level(3), edge(4) | ||
| iRQShareable | 1.3.6.1.4.1.412.2.4.12.1.4 | ||
| If true, this IRQ is shareable. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| iRQDescription | 1.3.6.1.4.1.412.2.4.12.1.5 | ||
| The name of the logical device that is currently using this IRQ. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfDMATable | 1.3.6.1.4.1.412.2.4.13 | ||
| This group defines various attributes for the various DMA channels in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDMA | |||
| dmtfDMAEntry | 1.3.6.1.4.1.412.2.4.13.1 | ||
| This group defines various attributes for the various DMA channels in this system. | |||
| OBJECT-TYPE | |||
| SdmtfDMA | |||
| dmtfDMAState | 1.3.6.1.4.1.412.2.4.13.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| dMANumber | 1.3.6.1.4.1.412.2.4.13.1.1 | ||
| The current DMA channel number. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMAChannelAvailability | 1.3.6.1.4.1.412.2.4.13.1.2 | ||
| If true, this DMA channel is available. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| dMABurstMode | 1.3.6.1.4.1.412.2.4.13.1.3 | ||
| If true, this DMA channel supports burst mode. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| dMADescription | 1.3.6.1.4.1.412.2.4.13.1.4 | ||
| The name of the logical device that is currently using this DMA channel. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfMemoryMappedIOTable | 1.3.6.1.4.1.412.2.4.14 | ||
| This group defines various attributes for memory mapped I/O on this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMemoryMappedIO | |||
| dmtfMemoryMappedIOEntry | 1.3.6.1.4.1.412.2.4.14.1 | ||
| This group defines various attributes for memory mapped I/O on this system. | |||
| OBJECT-TYPE | |||
| SdmtfMemoryMappedIO | |||
| dmtfMemoryMappedIOState | 1.3.6.1.4.1.412.2.4.14.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryMappedIOStartingAddress | 1.3.6.1.4.1.412.2.4.14.1.1 | ||
| The starting address of a contiguous System memory mapped I/O region. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| memoryMappedIOEndingAddress | 1.3.6.1.4.1.412.2.4.14.1.2 | ||
| The ending address of a contiguous System memory mapped I/O region. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| memoryMappedIODescription | 1.3.6.1.4.1.412.2.4.14.1.3 | ||
| The name of the logical device currently using this Memory Mapped I/O. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfSystemEnclosureTable | 1.3.6.1.4.1.412.2.4.15 | ||
| This group defines the attributes for the system enclosure. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemEnclosure | |||
| dmtfSystemEnclosureEntry | 1.3.6.1.4.1.412.2.4.15.1 | ||
| This group defines the attributes for the system enclosure. | |||
| OBJECT-TYPE | |||
| SdmtfSystemEnclosure | |||
| enclosureOrChassisType | 1.3.6.1.4.1.412.2.4.15.1.1 | ||
| The type of enclosure. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), desktop(3), lowProfileDesktop(4), pizzaBox(5), miniTower(6), tower(7), portable(8), lapTop(9), notebook(10), handHeld(11), dockingStation(12), allInOne(13), subNotebook(14), spaceSaving(15), lunchBox(16), mainSystemChassis(17), expansionChassis(18), subChassis(19), busExpansionChassis(20), peripheralChassis(21), rAIDChassis(22), rackMountChassis(23), sealedCasePC(24) | ||
| assetTag | 1.3.6.1.4.1.412.2.4.15.1.2 | ||
| The system asset tag string. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| chassisLockPresent | 1.3.6.1.4.1.412.2.4.15.1.3 | ||
| If true, a chassis lock is present. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| bootupState | 1.3.6.1.4.1.412.2.4.15.1.4 | ||
| The current state of this system when it booted. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6) | ||
| powerState | 1.3.6.1.4.1.412.2.4.15.1.5 | ||
| The current state of the power supply for this system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6) | ||
| thermalState | 1.3.6.1.4.1.412.2.4.15.1.6 | ||
| The current thermal state of this system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6) | ||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.15.1.7 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.15.1.8 | ||
| The index into the Operational State table for this device if applicable. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfPowerSupplyTable | 1.3.6.1.4.1.412.2.4.16 | ||
| This group defines various attributes for power supplies in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPowerSupply | |||
| dmtfPowerSupplyTraps | 1.3.6.1.4.1.412.2.4.16.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfPowerSupplyStatusChange | 1.3.6.1.4.1.412.2.4.16.0.1 | ||
| The operational status of a power supply on the system has changed according to the event severity indicated. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPowerSupplyEvSys | |||
| dmtfPowerSupplyEvSub | |||
| dmtfPowerSupplyPowerControlRequest | 1.3.6.1.4.1.412.2.4.16.0.2 | ||
| The power control setting for a power supply on the system has changed. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPowerSupplyEvSys | |||
| dmtfPowerSupplyEvSub | |||
| dmtfPowerSupplyEntry | 1.3.6.1.4.1.412.2.4.16.1 | ||
| This group defines various attributes for power supplies in this system. | |||
| OBJECT-TYPE | |||
| SdmtfPowerSupply | |||
| dmtfPowerSupplyState | 1.3.6.1.4.1.412.2.4.16.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| powerSupplyIndex | 1.3.6.1.4.1.412.2.4.16.1.1 | ||
| The index number of the current power supply. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.16.1.2 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.16.1.3 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerUnitIndex | 1.3.6.1.4.1.412.2.4.16.1.4 | ||
| This is the ID of the Power Unit (logical power supply) to which this Power Supply belongs. This value matches up with the Power Unit Table Index attribute defined in the Power Unit Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerSupplyType | 1.3.6.1.4.1.412.2.4.16.1.5 | ||
| This attribute describes the type of Power Supply, e.g. Linear, Switching, Battery, etc. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), linear(3), switching(4), battery(5), uPS(6), converter(7), regulator(8) | ||
| inputVoltageCapabilityDescription | 1.3.6.1.4.1.412.2.4.16.1.6 | ||
| An expanded description of the Input Voltage Capability for this Power Supply. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| range1InputVoltageLow | 1.3.6.1.4.1.412.2.4.16.1.7 | ||
| The low voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range1InputVoltageHigh | 1.3.6.1.4.1.412.2.4.16.1.8 | ||
| The high voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range1VoltageProbeIndex | 1.3.6.1.4.1.412.2.4.16.1.9 | ||
| Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range1ElectricalCurrentProbeIndex | 1.3.6.1.4.1.412.2.4.16.1.10 | ||
| Index into the Elelctrical Current Probe table identifying the Electrical current probe monitoring this input range. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2InputVoltageLow | 1.3.6.1.4.1.412.2.4.16.1.11 | ||
| The low voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2InputVoltageHigh | 1.3.6.1.4.1.412.2.4.16.1.12 | ||
| The high voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2VoltageProbeIndex | 1.3.6.1.4.1.412.2.4.16.1.13 | ||
| Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2CurrentProbeIndex | 1.3.6.1.4.1.412.2.4.16.1.14 | ||
| Index into the Current Probe table identifying the current probe monitoring this input range. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| activeInputVoltageRange | 1.3.6.1.4.1.412.2.4.16.1.15 | ||
| The value of this attribute indicates which input voltage range of this Power Supply is currently active. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), range1(3), range2(4), both(5) | ||
| inputVoltageRangeSwitching | 1.3.6.1.4.1.412.2.4.16.1.16 | ||
| This attribute describes the kind of input voltage range switching that is implemented in this power supply. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), manual(3), autoswitch(4), wideRange(5), notApplicable(6) | ||
| range1InputFrequencyLow | 1.3.6.1.4.1.412.2.4.16.1.17 | ||
| The frequency at the low end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range1InputFrequencyHigh | 1.3.6.1.4.1.412.2.4.16.1.18 | ||
| The frequency at the high end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2InputFrequencyLow | 1.3.6.1.4.1.412.2.4.16.1.19 | ||
| The frequency at the low end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| range2InputFrequencyHigh | 1.3.6.1.4.1.412.2.4.16.1.20 | ||
| The frequency at the high end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| totalOutputPower | 1.3.6.1.4.1.412.2.4.16.1.21 | ||
| This attribute value represents the total output power of this power supply in milliWatts. 0x80000000 denotes 'unknown' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfPowerSupplyEvSys | 1.3.6.1.4.1.412.2.4.16.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfPowerSupplyEvSub | 1.3.6.1.4.1.412.2.4.16.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfCoolingDeviceTable | 1.3.6.1.4.1.412.2.4.17 | ||
| This group defines various attributes for cooling devices in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfCoolingDevice | |||
| dmtfCoolingDeviceTraps | 1.3.6.1.4.1.412.2.4.17.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfCoolingDeviceStatusChange | 1.3.6.1.4.1.412.2.4.17.0.1 | ||
| A cooling device (e.g., fan) on the system has changed status according to the event severity indicated. Improper operation of a system cooling device can lead to over-heating and eventual breakdown of the system. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfCoolingDeviceEvSys | |||
| dmtfCoolingDeviceEvSub | |||
| dmtfCoolingDeviceTemperatureFault | 1.3.6.1.4.1.412.2.4.17.0.2 | ||
| A temperature fault has been detected by a cooling device (e.g., fan) on the system. The system or a system component is either over-heating or too cold. Probable causes include an inoperable or obstructed cooling device; or insufficient ventilation around the system. This condition can lead to eventual breakdown of the system if left unattended. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfCoolingDeviceEvSys | |||
| dmtfCoolingDeviceEvSub | |||
| dmtfCoolingDeviceEntry | 1.3.6.1.4.1.412.2.4.17.1 | ||
| This group defines various attributes for cooling devices in this system. | |||
| OBJECT-TYPE | |||
| SdmtfCoolingDevice | |||
| dmtfCoolingDeviceState | 1.3.6.1.4.1.412.2.4.17.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| coolingDeviceTableIndex | 1.3.6.1.4.1.412.2.4.17.1.1 | ||
| An index into the cooling device table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.17.1.2 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.17.1.3 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| coolingUnitIndex | 1.3.6.1.4.1.412.2.4.17.1.4 | ||
| This is the ID of the Cooling Unit (logical cooling device) of which this Cooling Device is a part. This value matches up with the Cooling Unit Table Index attribute defined in the Cooling Unit Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| coolingDeviceType | 1.3.6.1.4.1.412.2.4.17.1.5 | ||
| The type of Cooling Device that this is e.g. Fan, Heat Pipe, etc. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), fan(3), centrifugalBlower(4), chipFan(5), cabinetFan(6), powerSupplyFan(7), heatPipe(8), integratedRefrigeration(9), activeCooling(32), passiveCooling(33) | ||
| temperatureProbeIndex | 1.3.6.1.4.1.412.2.4.17.1.6 | ||
| Index into the Temperature Probe table identifying the temperatu e probe monitoring this cooling device. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfCoolingDeviceEvSys | 1.3.6.1.4.1.412.2.4.17.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfCoolingDeviceEvSub | 1.3.6.1.4.1.412.2.4.17.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfSystemSlotTable | 1.3.6.1.4.1.412.2.4.18 | ||
| This group defines the attributes for the different system expansion slots supported in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemSlot | |||
| dmtfSystemSlotEntry | 1.3.6.1.4.1.412.2.4.18.1 | ||
| This group defines the attributes for the different system expansion slots supported in this system. | |||
| OBJECT-TYPE | |||
| SdmtfSystemSlot | |||
| dmtfSystemSlotState | 1.3.6.1.4.1.412.2.4.18.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| slotIndex | 1.3.6.1.4.1.412.2.4.18.1.1 | ||
| An index into the system slot table. This is the hardware ID number for each expansion slot, whether it is occupied or not (starting with 1). | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| slotType | 1.3.6.1.4.1.412.2.4.18.1.2 | ||
| The bus type supported in this slot. This is a bit field with the following definitions: Bit 0 (2^0), if 1, it is a long-length card; if 0, it is a short-length card, Bit 1 (2^1) if set, indicates ISA, Bit 2 (2^2) indicates EISA, Bit 3 (2^3) indicates MCA, Bit 4 (2^4) indicates PCI, Bit 5 (2^5) indicates VL, Bit 6 (2^6) indicates PCMCIA, Bit 7 (2^7) refers to NuBus, Bit 8 (2^8) indicates PC-98/C20, Bit 9 (2^9) indicates PC-98/C24, Bit 10 (2^10) indicates PC-98/E, Bit 11 (2^ | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| slotWidth | 1.3.6.1.4.1.412.2.4.18.1.3 | ||
| The maximum bus width of cards accepted in this slot. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8BitCard(3), x16BitCard(4), x32BitCard(5), x64BitCard(6), x128BitCard(7) | ||
| currentUsage | 1.3.6.1.4.1.412.2.4.18.1.4 | ||
| Is this slot is currently in use? | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), available(3), inUse(4) | ||
| slotDescription | 1.3.6.1.4.1.412.2.4.18.1.5 | ||
| The card currently occupying this slot. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| slotCategory | 1.3.6.1.4.1.412.2.4.18.1.6 | ||
| The word 'slot' is used to refer to bus slots. The last case (motherboard) refers to situations where a functional element is integrated onto, say, a motherboard and connects to a bus without a connector. It still takes up an expansion site on the bus but this is termed a 'virtual slot' as opposed to a physical slot (see the attribute 'Virtual Slot'). Virtual slots are in effect permanently occupied expansion sites. This attribute establishes which category of physical slot this table entry is defining. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), busConnector(3), pCMCIASlot(4), motherboard(5) | ||
| virtualSlot | 1.3.6.1.4.1.412.2.4.18.1.7 | ||
| This attribute indicates whether this is a 'virtual slot' or not. A 'virtual slot' is an expansion site that is permanently occupied because of the level of integration of an expandable component. An example of a virtual slot is an I/O bus position taken up by a LAN controller that is integrated onto a motherboard. A slot with the 'Slot Category' of Motherboard is typically a Virtual Slot. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| resourceUserID | 1.3.6.1.4.1.412.2.4.18.1.8 | ||
| Value used to locate the rows in the System Resources 2 table for the resources associated with this slot or expansion site. 0 = 'unspecified' | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| vccMixedVoltageSupport | 1.3.6.1.4.1.412.2.4.18.1.9 | ||
| Device Vcc Mixed Voltage support. This is a bit field with the following definitions: Bit 0 (2^0), if set, indicates 3.3V support Bit 1 (2^1), if set, indicates 5V support | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| vppMixedVoltageSupport | 1.3.6.1.4.1.412.2.4.18.1.10 | ||
| Device Vpp Mixed Voltage support. This is a bit field with the following definitions: Bit 0 (2^0), if set, indicates 3.3V support Bit 1 (2^1), if set, indicates 5V support Bit 2 (2^2), if set, indicates 12V support | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| slotThermalRating | 1.3.6.1.4.1.412.2.4.18.1.11 | ||
| The maximum thermal dissipation of the slot in milliwatts. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfVideoTable | 1.3.6.1.4.1.412.2.4.19 | ||
| This group defines the attributes of video devices in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfVideo | |||
| dmtfVideoEntry | 1.3.6.1.4.1.412.2.4.19.1 | ||
| This group defines the attributes of video devices in this system. | |||
| OBJECT-TYPE | |||
| SdmtfVideo | |||
| dmtfVideoState | 1.3.6.1.4.1.412.2.4.19.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| videoIndex | 1.3.6.1.4.1.412.2.4.19.1.1 | ||
| An index into the video table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| videoType | 1.3.6.1.4.1.412.2.4.19.1.2 | ||
| The architecture of the video subsystem in this system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), cGA(3), eGA(4), vGA(5), sVGA(6), mDA(7), hGC(8), mCGA(9), x8514A(10), xGA(11), linearFrameBuffer(12), pC98(160) | ||
| currentVideoMode | 1.3.6.1.4.1.412.2.4.19.1.3 | ||
| The current video mode in this system. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| minimumRefreshRate | 1.3.6.1.4.1.412.2.4.19.1.4 | ||
| The minimum refresh rate for this video subsystem in Hz. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| maximumRefreshRate | 1.3.6.1.4.1.412.2.4.19.1.5 | ||
| The maximum refresh rate for this video subsystem in Hz. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| videoMemoryType | 1.3.6.1.4.1.412.2.4.19.1.6 | ||
| The type of video memory for this adapter. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), vRAM(3), dRAM(4), sRAM(5), wRAM(6), eDORAM(7), burstSynchronousDRAM(8), pipelinedBurstSRAM(9) | ||
| videoRAMMemorySize | 1.3.6.1.4.1.412.2.4.19.1.7 | ||
| Video adapter memory size in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| scanMode | 1.3.6.1.4.1.412.2.4.19.1.8 | ||
| The scan mode for this video device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), interlaced(3), nonInterlaced(4) | ||
| videoPhysicalLocation | 1.3.6.1.4.1.412.2.4.19.1.9 | ||
| The location of the video controller circuitry. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), integrated(3), addOnCard(4) | ||
| currentVerticalResolution | 1.3.6.1.4.1.412.2.4.19.1.10 | ||
| The current number of vertical pixels. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentHorizontalResolution | 1.3.6.1.4.1.412.2.4.19.1.11 | ||
| The current number of horizontal pixels. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentNumberOfBitsPerPixel | 1.3.6.1.4.1.412.2.4.19.1.12 | ||
| The number of bits used to display each pixel for this video device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentNumberOfRows | 1.3.6.1.4.1.412.2.4.19.1.13 | ||
| The number of rows in character mode for this video device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentNumberOfColumns | 1.3.6.1.4.1.412.2.4.19.1.14 | ||
| The number of columns in character mode for this video device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentRefreshRate | 1.3.6.1.4.1.412.2.4.19.1.15 | ||
| The current refresh rate in Hz for this video device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.19.1.16 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.19.1.17 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfVideoBIOSTable | 1.3.6.1.4.1.412.2.4.20 | ||
| This group defines the attributes for the Video BIOS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfVideoBIOS | |||
| dmtfVideoBIOSEntry | 1.3.6.1.4.1.412.2.4.20.1 | ||
| This group defines the attributes for the Video BIOS. | |||
| OBJECT-TYPE | |||
| SdmtfVideoBIOS | |||
| dmtfVideoBIOSState | 1.3.6.1.4.1.412.2.4.20.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| videoBIOSIndex | 1.3.6.1.4.1.412.2.4.20.1.1 | ||
| The index into the Video BIOS table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| videoBIOSManufacturer | 1.3.6.1.4.1.412.2.4.20.1.2 | ||
| The name of the company that wrote this Video BIOS. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| videoBIOSVersion | 1.3.6.1.4.1.412.2.4.20.1.3 | ||
| The version number or version string of this Video BIOS. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| videoBIOSReleaseDate | 1.3.6.1.4.1.412.2.4.20.1.4 | ||
| The Video BIOS release date. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| videoBIOSShadowingState | 1.3.6.1.4.1.412.2.4.20.1.5 | ||
| If true, the Video BIOS is currently being shadowed. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| dmtfVideoBIOSCharacteristicTable | 1.3.6.1.4.1.412.2.4.21 | ||
| This group defines the characteristics for the Video BIOS. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfVideoBIOSCharacteristic | |||
| dmtfVideoBIOSCharacteristicEntry | 1.3.6.1.4.1.412.2.4.21.1 | ||
| This group defines the characteristics for the Video BIOS. | |||
| OBJECT-TYPE | |||
| SdmtfVideoBIOSCharacteristic | |||
| dmtfVideoBIOSCharacteristicState | 1.3.6.1.4.1.412.2.4.21.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| videoBIOSCharacteristicIndex | 1.3.6.1.4.1.412.2.4.21.1.1 | ||
| This is an index into the Video BIOS Characteristics table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| videoBIOSNumber | 1.3.6.1.4.1.412.2.4.21.1.2 | ||
| This is the Video BIOS number which correlates to the Video BIOS Index. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| videoBIOSCharacteristic | 1.3.6.1.4.1.412.2.4.21.1.3 | ||
| The attributes and extensions supported by this version of the Video BIOS. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), unsupported(3), standardVideoBIOS(4), vESABIOSExtensionsSupported(5), vESAPowerManagementSupported(6), vESADisplayDataChannelSupported(7), videoBIOSShadowingAllowed(8), videoBIOSUpgradeable(9) | ||
| videoBIOSCharacteristicDescription | 1.3.6.1.4.1.412.2.4.21.1.4 | ||
| Expanded description of this VIDEO BIOS characteristic. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfDisksTable | 1.3.6.1.4.1.412.2.4.22 | ||
| This group defines the physical attributes of disk mass storage devices inthis system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDisks | |||
| dmtfDisksTraps | 1.3.6.1.4.1.412.2.4.22.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfDisksStatusChange | 1.3.6.1.4.1.412.2.4.22.0.1 | ||
| The operational status of a physical disk on the system has changed, as indicated by the event severity. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfDisksEvSys | |||
| dmtfDisksEvSub | |||
| dmtfDisksInitializationError | 1.3.6.1.4.1.412.2.4.22.0.2 | ||
| A physical disk drive on the system failed to initialize properly on startup. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfDisksEvSys | |||
| dmtfDisksEvSub | |||
| dmtfDisksConfigurationError | 1.3.6.1.4.1.412.2.4.22.0.3 | ||
| A disk drive on the system is not properly configured | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfDisksEvSys | |||
| dmtfDisksEvSub | |||
| dmtfDisksEntry | 1.3.6.1.4.1.412.2.4.22.1 | ||
| This group defines the physical attributes of disk mass storage devices inthis system. | |||
| OBJECT-TYPE | |||
| SdmtfDisks | |||
| dmtfDisksState | 1.3.6.1.4.1.412.2.4.22.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| storageType | 1.3.6.1.4.1.412.2.4.22.1.1 | ||
| The type of this mass storage device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), hardDisk(3), floppyDisk(4), opticalROM(5), opticalWORM(6), opticalRW(7), compactDisk(8), flashDisk(9), bernoulli(10), opticalFloppyDisk(11) | ||
| diskIndex | 1.3.6.1.4.1.412.2.4.22.1.2 | ||
| An index into the disk table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| storageInterfaceType | 1.3.6.1.4.1.412.2.4.22.1.3 | ||
| The interface used by this mass storage device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), sCSI(3), eSDI(4), iDE(5), cMD(6), iPI(7), sT506(8), dSSI(9), parallelPort(10), hIPPI(11), qIC2(12), floppyDiskInterface(13), pCMCIA(14), enhancedATAIDE(15) | ||
| interfaceDescription | 1.3.6.1.4.1.412.2.4.22.1.4 | ||
| A longer description of the mass storage interface. For example, SCSI2 fast wide. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| mediaLoaded | 1.3.6.1.4.1.412.2.4.22.1.5 | ||
| If true, the media is loaded. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| removableDrive | 1.3.6.1.4.1.412.2.4.22.1.6 | ||
| If true, this drive is removable. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| removableMedia | 1.3.6.1.4.1.412.2.4.22.1.7 | ||
| If true, the media in this drive is removable. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| deviceID | 1.3.6.1.4.1.412.2.4.22.1.8 | ||
| The SCSI address of this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalUnitNumber | 1.3.6.1.4.1.412.2.4.22.1.9 | ||
| The logical unit number of this SCSI device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfPhysicalCylinders | 1.3.6.1.4.1.412.2.4.22.1.10 | ||
| The number of reported physical cylinders on this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfPhysicalSectorsPerTrack | 1.3.6.1.4.1.412.2.4.22.1.11 | ||
| The number of reported physical sectors per track for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfPhysicalHeads | 1.3.6.1.4.1.412.2.4.22.1.12 | ||
| The number of reported physical heads for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| physicalCylinderForWritePrecompensation | 1.3.6.1.4.1.412.2.4.22.1.13 | ||
| Specifies the physical cylinder used for write precompensation on this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| physicalCylinderForLandingZone | 1.3.6.1.4.1.412.2.4.22.1.14 | ||
| The physical landing zone cylinder of this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| sectorSize | 1.3.6.1.4.1.412.2.4.22.1.15 | ||
| The size in bytes of the physical disk sector or logical block as reported by the disk. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| totalPhysicalSize | 1.3.6.1.4.1.412.2.4.22.1.16 | ||
| The total size in kilobytes (1024 bytes) of this device that is available to users | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfCurrentBadBlocksOrSectors | 1.3.6.1.4.1.412.2.4.22.1.17 | ||
| The number of current bad blocks or sectors to include total of both factory assigned and grown defects. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitions | 1.3.6.1.4.1.412.2.4.22.1.18 | ||
| The number of partitions on this storage unit. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| physicalLocation | 1.3.6.1.4.1.412.2.4.22.1.19 | ||
| The physical location of this disk drive assembly relative to the system enclosure. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), internal(3), external(4) | ||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.22.1.20 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.22.1.21 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| securitySettings | 1.3.6.1.4.1.412.2.4.22.1.22 | ||
| Enum describing the current hardware security settings on this device | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), readOnly(4), lockoutEnabled(5), bootBypass(6), bootBypassReadOnly(7) | ||
| dmtfDisksEvSys | 1.3.6.1.4.1.412.2.4.22.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfDisksEvSub | 1.3.6.1.4.1.412.2.4.22.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfDisksMappingTable | 1.3.6.1.4.1.412.2.4.23 | ||
| A table relating disks to partitions. May have an instance of a disk or partition more than once. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDisksMappingTable | |||
| dmtfDisksMappingEntry | 1.3.6.1.4.1.412.2.4.23.1 | ||
| A table relating disks to partitions. May have an instance of a disk or partition more than once. | |||
| OBJECT-TYPE | |||
| SdmtfDisksMappingTable | |||
| dmtfDisksMappingTableState | 1.3.6.1.4.1.412.2.4.23.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| storageType | 1.3.6.1.4.1.412.2.4.23.1.1 | ||
| The type of the mass storage device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), hardDisk(3), floppyDisk(4), opticalROM(5), opticalWORM(6), opticalRW(7), compactDisk(8), flashDisk(9), bernoulli(10), opticalFloppyDisk(11) | ||
| diskIndex | 1.3.6.1.4.1.412.2.4.23.1.2 | ||
| An index value into the Disks table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionIndex | 1.3.6.1.4.1.412.2.4.23.1.3 | ||
| An index value into the partition table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfPartitionTable | 1.3.6.1.4.1.412.2.4.24 | ||
| This group describes the partitions on particular disks. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPartition | |||
| dmtfPartitionEntry | 1.3.6.1.4.1.412.2.4.24.1 | ||
| This group describes the partitions on particular disks. | |||
| OBJECT-TYPE | |||
| SdmtfPartition | |||
| dmtfPartitionState | 1.3.6.1.4.1.412.2.4.24.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| partitionIndex | 1.3.6.1.4.1.412.2.4.24.1.1 | ||
| The index into the partition table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionName | 1.3.6.1.4.1.412.2.4.24.1.2 | ||
| The name used by the system to identify the partition. This is normally the drive letter. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| partitionSize | 1.3.6.1.4.1.412.2.4.24.1.3 | ||
| The size of this partition in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| freeSpace | 1.3.6.1.4.1.412.2.4.24.1.4 | ||
| The number of free kilobytes on this partition. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| partitionLabel | 1.3.6.1.4.1.412.2.4.24.1.5 | ||
| The partition label or the unique volume label field for this physical volume. (For DOS, this is the volume label plus the 32 bit Volume ID field if available.) | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| fileSystem | 1.3.6.1.4.1.412.2.4.24.1.6 | ||
| The file system associated with this partition. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), fAT(3), hPFS(4), nTFS(5), oFS(6), mFS(7), hFS(8), vXFS(9), sFS(10), s5(11), s52K(12), uFS(13), fFS(14), netware286(15), netware386(16), fAT32(17) | ||
| compressed | 1.3.6.1.4.1.412.2.4.24.1.7 | ||
| If true, this partition is compressed. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| encrypted | 1.3.6.1.4.1.412.2.4.24.1.8 | ||
| If true, this partition is encrypted. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| numberOfDisksOccupied | 1.3.6.1.4.1.412.2.4.24.1.9 | ||
| The number of disks this partition occupies. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfDiskControllerTable | 1.3.6.1.4.1.412.2.4.25 | ||
| This group defines the disk controller in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDiskController | |||
| dmtfDiskControllerTraps | 1.3.6.1.4.1.412.2.4.25.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfDiskControllerInitializationFailure | 1.3.6.1.4.1.412.2.4.25.0.1 | ||
| A disk controller on the system failed to initialize properly during system startup. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfDiskControllerEvSys | |||
| dmtfDiskControllerEvSub | |||
| dmtfDiskControllerConfigurationError | 1.3.6.1.4.1.412.2.4.25.0.2 | ||
| A disk controller on the system is not properly configured | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfDiskControllerEvSys | |||
| dmtfDiskControllerEvSub | |||
| dmtfDiskControllerEntry | 1.3.6.1.4.1.412.2.4.25.1 | ||
| This group defines the disk controller in this system. | |||
| OBJECT-TYPE | |||
| SdmtfDiskController | |||
| dmtfDiskControllerState | 1.3.6.1.4.1.412.2.4.25.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| diskControllerIndex | 1.3.6.1.4.1.412.2.4.25.1.1 | ||
| Index value used by the system to identify the disk controller. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.25.1.2 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.25.1.3 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemSlotIndex | 1.3.6.1.4.1.412.2.4.25.1.4 | ||
| Index value in System Slot table of disk Controller. 0 = no slot | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| diskControllerIdentification | 1.3.6.1.4.1.412.2.4.25.1.5 | ||
| Name, brand and hardware revision level of the disk controller. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| controllerSoftwareRevisionLevel | 1.3.6.1.4.1.412.2.4.25.1.6 | ||
| Level and version of the software associated with this controlle . | |||
| OBJECT-TYPE | |||
| DmiString | |||
| controllerChannelCount | 1.3.6.1.4.1.412.2.4.25.1.7 | ||
| The number of channels supported by this controller. 0x80000000 = Unknown | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| controllerMaximumDevices | 1.3.6.1.4.1.412.2.4.25.1.8 | ||
| The maximum number of devices for all channels which can be controlled by this disk controller. 0x80000000 = Unknown | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfDiskControllerEvSys | 1.3.6.1.4.1.412.2.4.25.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfDiskControllerEvSub | 1.3.6.1.4.1.412.2.4.25.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfLogicalDrivesTable | 1.3.6.1.4.1.412.2.4.26 | ||
| This group defines the attributes of the logical drives in a system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfLogicalDrives | |||
| dmtfLogicalDrivesEntry | 1.3.6.1.4.1.412.2.4.26.1 | ||
| This group defines the attributes of the logical drives in a system. | |||
| OBJECT-TYPE | |||
| SdmtfLogicalDrives | |||
| dmtfLogicalDrivesState | 1.3.6.1.4.1.412.2.4.26.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| logicalDriveIndex | 1.3.6.1.4.1.412.2.4.26.1.1 | ||
| An index into the Logical Drive table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalDriveName | 1.3.6.1.4.1.412.2.4.26.1.2 | ||
| Name used by the system to identify this logical drive. For DOS, this could be the logical drive letter (A, B, C...). | |||
| OBJECT-TYPE | |||
| DmiString | |||
| logicalDriveType | 1.3.6.1.4.1.412.2.4.26.1.3 | ||
| This defines the logical drive type. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), fixedDrive(3), removableDrive(4), remoteDrive(5), cDROM(6), floppyDrive(7), rAMDrive(8), driveArray(9) | ||
| logicalDriveSize | 1.3.6.1.4.1.412.2.4.26.1.4 | ||
| The size of this logical drive in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| freeLogicalDriveSize | 1.3.6.1.4.1.412.2.4.26.1.5 | ||
| The remaining space on this logical drive in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalDrivePath | 1.3.6.1.4.1.412.2.4.26.1.6 | ||
| The path used to access this logical drive (for remote drives). | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfMouseTable | 1.3.6.1.4.1.412.2.4.27 | ||
| This group defines the characteristics of a mouse input device. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMouse | |||
| dmtfMouseEntry | 1.3.6.1.4.1.412.2.4.27.1 | ||
| This group defines the characteristics of a mouse input device. | |||
| OBJECT-TYPE | |||
| SdmtfMouse | |||
| mouseInterface | 1.3.6.1.4.1.412.2.4.27.1.1 | ||
| The interface type of this mouse. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), serial(3), pS2(4), infrared(5), hPHIL(6), busMouse(7), aDBAppleDesktopBus(8), busMouseDB9(160), busMouseMicroDIN(161), uSB(162) | ||
| mouseIRQ | 1.3.6.1.4.1.412.2.4.27.1.2 | ||
| The IRQ number used by this mouse. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mouseButtons | 1.3.6.1.4.1.412.2.4.27.1.3 | ||
| The number of mouse buttons on this mouse. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mousePortName | 1.3.6.1.4.1.412.2.4.27.1.4 | ||
| The name of the port currently being used by this mouse. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| mouseDriverName | 1.3.6.1.4.1.412.2.4.27.1.5 | ||
| The name of the mouse driver. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| mouseDriverVersion | 1.3.6.1.4.1.412.2.4.27.1.6 | ||
| The version number of the mouse driver. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.27.1.7 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.27.1.8 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| securitySettings | 1.3.6.1.4.1.412.2.4.27.1.9 | ||
| Enum describing the current hardware security settings on this device | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5) | ||
| dmtfKeyboardTable | 1.3.6.1.4.1.412.2.4.28 | ||
| This group defines the characteristics of the system keyboard. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfKeyboard | |||
| dmtfKeyboardEntry | 1.3.6.1.4.1.412.2.4.28.1 | ||
| This group defines the characteristics of the system keyboard. | |||
| OBJECT-TYPE | |||
| SdmtfKeyboard | |||
| keyboardLayout | 1.3.6.1.4.1.412.2.4.28.1.1 | ||
| A description of the layout of this keyboard. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| keyboardType | 1.3.6.1.4.1.412.2.4.28.1.2 | ||
| The type description of this keyboard. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| keyboardConnectorType | 1.3.6.1.4.1.412.2.4.28.1.3 | ||
| The type of keyboard connector used by this keyboard. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), miniDin(3), microDin(4), pS2(5), infrared(6), hPHIL(7), dB9(8), accessBus(9), pC98(160) | ||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.28.1.4 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.28.1.5 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| securitySettings | 1.3.6.1.4.1.412.2.4.28.1.6 | ||
| Enum describing the current hardware security settings on this device | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), externalInterfaceLockedOut(4), externalInterfaceEnabled(5) | ||
| dmtfFRUTable | 1.3.6.1.4.1.412.2.4.29 | ||
| A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfFRU | |||
| dmtfFRUEntry | 1.3.6.1.4.1.412.2.4.29.1 | ||
| A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of this definition, a motherboard and a fixed hard disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place on the motherboard are not FRUs since they are not designed to be separately removable. Each instance within the FRU table should contain the device group and instance data for the associated hardware component. | |||
| OBJECT-TYPE | |||
| SdmtfFRU | |||
| dmtfFRUState | 1.3.6.1.4.1.412.2.4.29.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| fRUIndex | 1.3.6.1.4.1.412.2.4.29.1.1 | ||
| The index into the Field Replaceable Unit table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceGroupIndex | 1.3.6.1.4.1.412.2.4.29.1.2 | ||
| The group ID of the group referencing this Field Replaceable Unit instance. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| description | 1.3.6.1.4.1.412.2.4.29.1.3 | ||
| A clear description of this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| manufacturer | 1.3.6.1.4.1.412.2.4.29.1.4 | ||
| The name of the company manufacturing or providing this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| model | 1.3.6.1.4.1.412.2.4.29.1.5 | ||
| The manufacturer's model number for this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| partNumber | 1.3.6.1.4.1.412.2.4.29.1.6 | ||
| A part number by which a replacement part can be ordered for this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| fRUSerialNumber | 1.3.6.1.4.1.412.2.4.29.1.7 | ||
| The manufacturer's serial number for this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| revisionLevel | 1.3.6.1.4.1.412.2.4.29.1.8 | ||
| The revision level of this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| warrantyStartDate | 1.3.6.1.4.1.412.2.4.29.1.9 | ||
| The start date of the service warranty for this Field Replaceabl Unit. | |||
| OBJECT-TYPE | |||
| DmiDate | |||
| warrantyDuration | 1.3.6.1.4.1.412.2.4.29.1.10 | ||
| The total duration of this Field Replaceable Unit warranty in months. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| supportPhoneNumber | 1.3.6.1.4.1.412.2.4.29.1.11 | ||
| The phone number(s) for support for this Field Replaceable Unit. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfOperationalStateTable | 1.3.6.1.4.1.412.2.4.30 | ||
| This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfOperationalState | |||
| dmtfOperationalStateEntry | 1.3.6.1.4.1.412.2.4.30.1 | ||
| This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances | |||
| OBJECT-TYPE | |||
| SdmtfOperationalState | |||
| dmtfOperationalStateState | 1.3.6.1.4.1.412.2.4.30.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| operationalStateInstanceIndex | 1.3.6.1.4.1.412.2.4.30.1.1 | ||
| The Index into the Operational State table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceGroupIndex | 1.3.6.1.4.1.412.2.4.30.1.2 | ||
| The group ID of the group referencing this instance. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalStatus | 1.3.6.1.4.1.412.2.4.30.1.3 | ||
| The operational status of the Device Group instance. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4), notApplicable(5) | ||
| usageState | 1.3.6.1.4.1.412.2.4.30.1.4 | ||
| The usage state of the Device Group instance. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), idle(3), active(4), busy(5), notApplicable(6) | ||
| availabilityStatus | 1.3.6.1.4.1.412.2.4.30.1.5 | ||
| The availability status of the Device Group instance. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), running(3), warning(4), inTest(5), notApplicable(6), powerOff(7), offLine-1(8), offDuty(9), degraded(10), notInstalled(11), installError(12), powerSave(13) | ||
| administrativeState | 1.3.6.1.4.1.412.2.4.30.1.6 | ||
| The administrative state of the Device Group instance. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), locked(3), unlocked(4), notApplicable(5), shuttingDown(6) | ||
| fatalErrorCount | 1.3.6.1.4.1.412.2.4.30.1.7 | ||
| The accumulated Fatal or Non-recoverable error count for this Device Group instance. | |||
| OBJECT-TYPE | |||
| DmiCounter | |||
| majorErrorCount | 1.3.6.1.4.1.412.2.4.30.1.8 | ||
| The accumulated Major or Critical error count for this Device Group instance. | |||
| OBJECT-TYPE | |||
| DmiCounter | |||
| warningErrorCount | 1.3.6.1.4.1.412.2.4.30.1.9 | ||
| The accumulated Warning or Non-Critical error count for this Device Group instance. | |||
| OBJECT-TYPE | |||
| DmiCounter | |||
| currentErrorStatus | 1.3.6.1.4.1.412.2.4.30.1.10 | ||
| This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part of the Device Group instance is 'Critical', while other status is 'Non-critical' then the status'Critical' should be reported. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| devicePredictedFailureStatus | 1.3.6.1.4.1.412.2.4.30.1.11 | ||
| Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device). | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), notSupportedByThisDevice(3), noFailurePredictedByTheDevice(4), deviceFailurePredictedByTheDevice(5), mediaFailurePredictedByTheDevice(6) | ||
| dmtfSystemResourcesDescriptionTable | 1.3.6.1.4.1.412.2.4.31 | ||
| The System Resources Description group describes the number of entries in the System Resources group. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemResourcesDescription | |||
| dmtfSystemResourcesDescriptionEntry | 1.3.6.1.4.1.412.2.4.31.1 | ||
| The System Resources Description group describes the number of entries in the System Resources group. | |||
| OBJECT-TYPE | |||
| SdmtfSystemResourcesDescription | |||
| deviceCount | 1.3.6.1.4.1.412.2.4.31.1.1 | ||
| A count of the number of different hardware devices represented in the System Resources table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemResourceCount | 1.3.6.1.4.1.412.2.4.31.1.2 | ||
| A count of the total number of system resources on this system. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfSystemResourcesTable | 1.3.6.1.4.1.412.2.4.32 | ||
| The System Resources group contains hardware descriptions which are commonly used in PC style computers such as IRQs, IO ports and memory address ranges. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemResources | |||
| dmtfSystemResourcesEntry | 1.3.6.1.4.1.412.2.4.32.1 | ||
| The System Resources group contains hardware descriptions which are commonly used in PC style computers such as IRQs, IO ports and memory address ranges. | |||
| OBJECT-TYPE | |||
| SdmtfSystemResources | |||
| dmtfSystemResourcesState | 1.3.6.1.4.1.412.2.4.32.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| resourceInstance | 1.3.6.1.4.1.412.2.4.32.1.1 | ||
| On systems that implement a PnP-like subsystem, the device ID should be the ID used by that subsystem. On systems that do not have inherent device numbering, then the instrumentation supporting the system resources group should devise a device numbering scheme. In either case, the table will naturally group all of the resources associated with a device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceNumber | 1.3.6.1.4.1.412.2.4.32.1.2 | ||
| This attribute is the ordinal of the resource within a device. Within the table, any device may have one or more resources. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceType | 1.3.6.1.4.1.412.2.4.32.1.3 | ||
| The type of system resource represented by this entry. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), memoryRange(3), iOPort(4), iRQ(5), dMA(6) | ||
| resourceBase | 1.3.6.1.4.1.412.2.4.32.1.4 | ||
| The starting address of the system resource in the appropriate address space. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceSize | 1.3.6.1.4.1.412.2.4.32.1.5 | ||
| The size of the system resource. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceFlags | 1.3.6.1.4.1.412.2.4.32.1.6 | ||
| This attribute contains fields representing the status of this resource entry. The meaning of this field varies according to the Resource Type field in this group. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceGroupID | 1.3.6.1.4.1.412.2.4.32.1.7 | ||
| This attribute is a 'back pointer' to a group within the system MIF, if applicable. If the back pointer is not known, either because the device is not represented by a group, or the actual device type is not known, then the value of this attribute will be 0. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfPhysicalMemoryArrayTable | 1.3.6.1.4.1.412.2.4.33 | ||
| This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPhysicalMemoryArray | |||
| dmtfPhysicalMemoryArrayTraps | 1.3.6.1.4.1.412.2.4.33.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfPhysicalMemoryArrayError | 1.3.6.1.4.1.412.2.4.33.0.1 | ||
| A physical memory module in the system has failed. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalMemoryArrayEvSys | |||
| dmtfPhysicalMemoryArrayEvSub | |||
| dmtfPhysicalMemoryArrayInitializationFailure | 1.3.6.1.4.1.412.2.4.33.0.2 | ||
| A physical memory module in the system failed to initialize properly during system startup. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalMemoryArrayEvSys | |||
| dmtfPhysicalMemoryArrayEvSub | |||
| dmtfPhysicalMemoryArrayEntry | 1.3.6.1.4.1.412.2.4.33.1 | ||
| This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions. | |||
| OBJECT-TYPE | |||
| SdmtfPhysicalMemoryArray | |||
| dmtfPhysicalMemoryArrayState | 1.3.6.1.4.1.412.2.4.33.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryArrayTableIndex | 1.3.6.1.4.1.412.2.4.33.1.1 | ||
| A unique number that identifies this row. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryArrayLocation | 1.3.6.1.4.1.412.2.4.33.1.2 | ||
| The physical location of the Memory Array, whether on the system board or an add-on board. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), systemBoardOrMotherboard(3), iSAAddOnCard(4), eISAAddOnCard(5), pCIAddOnCard(6), mCAAddOnCard(7), pCMCIAAddOnCard(8), proprietaryAddOnCard(9), nuBus(16), pC98C20AddOnCard(160), pC98C24AddOnCard(161), pC98EAddOnCard(162), pC98LocalBusAddOnCard(163), pC98CardSlotAddOnCard(164) | ||
| memoryArrayUse | 1.3.6.1.4.1.412.2.4.33.1.3 | ||
| What this Memory Array is used for. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), systemMemory(3), videoMemory(4), flashMemory(5), nonVolatileRAM(6), cacheMemory(7) | ||
| maximumMemoryCapacity | 1.3.6.1.4.1.412.2.4.33.1.4 | ||
| The maximum memory capacity, in kilobytes, on this array. 0x80000000denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfMemoryDeviceSockets | 1.3.6.1.4.1.412.2.4.33.1.5 | ||
| The number of SIMM slots or sockets available for Memory Devices in this array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| numberOfMemoryDeviceSocketsUsed | 1.3.6.1.4.1.412.2.4.33.1.6 | ||
| The number of SIMM slots or sockets in use for Memory Devices in this array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryErrorCorrection | 1.3.6.1.4.1.412.2.4.33.1.7 | ||
| The main hardware error correction or detection method supported by this Memory Array. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), none(3), parity(4), singleBitECC(5), multiBitECC(6), cRC(7) | ||
| arrayErrorType | 1.3.6.1.4.1.412.2.4.33.1.8 | ||
| The type of error that is associated with the current status reported in Operational State for this Memory Array. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), badRead(4), parityError(5), singleBitError(6), doubleBitError(7), multiBitError(8), nibbleError(9), checksumError(10), cRCError(11), correctedSingleBitError(12), correctedError(13), uncorrectableError(14) | ||
| lastErrorUpdate | 1.3.6.1.4.1.412.2.4.33.1.9 | ||
| System state during which last error status was collected. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), noUpdateSinceLastInstrumentationStart(3), updatedFromInformationObtainedPriorToInstrumentati(4), updatedDuringInstrumentationRunTime(5) | ||
| errorOperation | 1.3.6.1.4.1.412.2.4.33.1.10 | ||
| The memory access operation that caused the current error. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), read(3), write(4), partialWrite(5) | ||
| errorDataSize | 1.3.6.1.4.1.412.2.4.33.1.11 | ||
| The size of the data transfer that caused the error, in bits. Zero indicates no error, 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| errorData | 1.3.6.1.4.1.412.2.4.33.1.12 | ||
| Data captured during the erroneous Memory Array access. The data occupy the first n bytes of the octet string required to hold 'Error Data Size' bits of the data. Data are stored least-significant byte first. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| vendorSyndrome | 1.3.6.1.4.1.412.2.4.33.1.13 | ||
| Vendor-specific syndrome or CRC data associated with the erroneous access. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| errorAddress | 1.3.6.1.4.1.412.2.4.33.1.14 | ||
| Physical address of the error based on the addressing of the bus that the Memory Array is connected to. 0x8000 0000 0000 0000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| errorResolution | 1.3.6.1.4.1.412.2.4.33.1.15 | ||
| Range in bytes that the error can be determined to be within, when an Error Address is given. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.33.1.16 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.33.1.17 | ||
| The index into the Operational State Table for this Memory Array. The Operational State row is used to hold the overall error count and error status for this array. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfPhysicalMemoryArrayEvSys | 1.3.6.1.4.1.412.2.4.33.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfPhysicalMemoryArrayEvSub | 1.3.6.1.4.1.412.2.4.33.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfMemoryArrayMappedAddressesTable | 1.3.6.1.4.1.412.2.4.34 | ||
| This table presents ranges of physical addresses that are mapped to a given Memory Array. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMemoryArrayMappedAddresses | |||
| dmtfMemoryArrayMappedAddressesEntry | 1.3.6.1.4.1.412.2.4.34.1 | ||
| This table presents ranges of physical addresses that are mapped to a given Memory Array. | |||
| OBJECT-TYPE | |||
| SdmtfMemoryArrayMappedAddresses | |||
| dmtfMemoryArrayMappedAddressesState | 1.3.6.1.4.1.412.2.4.34.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryArrayMappedAddressesTableIndex | 1.3.6.1.4.1.412.2.4.34.1.1 | ||
| A unique number that identifies this row. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryArrayIndex | 1.3.6.1.4.1.412.2.4.34.1.2 | ||
| The ID of the Memory Array that this address range is mapped to. Multiple address ranges may be mapped to a Memory Array. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mappedRangeStartingAddress | 1.3.6.1.4.1.412.2.4.34.1.3 | ||
| The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mappedRangeEndingAddress | 1.3.6.1.4.1.412.2.4.34.1.4 | ||
| The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionID | 1.3.6.1.4.1.412.2.4.34.1.5 | ||
| Identifies a Memory Partition associated with the Memory Array specified by Memory Array Table Index. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionWidth | 1.3.6.1.4.1.412.2.4.34.1.6 | ||
| The number of Memory Devices that form a single row of memory for the partition. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.34.1.7 | ||
| The index into the Operational State Table for this Memory Range. Generally, there will be a 1:1 correspondence between a mapped range and a partition. In which case, the Operational State will be for the partition as well. In the case that there is more than one mapped range for a partion, it will be necessary to check the Operational State entries for each range to determine the overall status of the partition. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfMemoryDeviceTable | 1.3.6.1.4.1.412.2.4.35 | ||
| This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based on the resolution to which a memory error can be determined and whether the device is replaceable as a unit. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMemoryDevice | |||
| dmtfMemoryDeviceEntry | 1.3.6.1.4.1.412.2.4.35.1 | ||
| This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based on the resolution to which a memory error can be determined and whether the device is replaceable as a unit. | |||
| OBJECT-TYPE | |||
| SdmtfMemoryDevice | |||
| dmtfMemoryDeviceState | 1.3.6.1.4.1.412.2.4.35.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryDeviceTableIndex | 1.3.6.1.4.1.412.2.4.35.1.1 | ||
| A unique number that identifies this row. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryArrayIndex | 1.3.6.1.4.1.412.2.4.35.1.2 | ||
| The ID of the Memory Array that this Memory Device is a part of. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceLocator | 1.3.6.1.4.1.412.2.4.35.1.3 | ||
| A string identifying the physically labeled socket or board position where the memory device is located. Eg. 'SIMM 3' or 'IC12'. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| bankLocator | 1.3.6.1.4.1.412.2.4.35.1.4 | ||
| A string identifying the physically labeled bank where the memory device is located. Eg. 'Bank 0' or 'A'. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| size | 1.3.6.1.4.1.412.2.4.35.1.5 | ||
| Size of this memory device, in bytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| formFactor | 1.3.6.1.4.1.412.2.4.35.1.6 | ||
| Implementation form factor for this memory device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), sIMM(3), sIP(4), chip(5), dIP(6), zIP(7), proprietaryCard(8), dIMM(9), tSOP(10), rowOfChips(11) | ||
| totalWidth | 1.3.6.1.4.1.412.2.4.35.1.7 | ||
| Total width of this memory device, including check or error correction bits, in bits. If there are no error correction bits, the value in this attribute should match that specified in Data Width. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dataWidth | 1.3.6.1.4.1.412.2.4.35.1.8 | ||
| Data width of this memory device, in bits. A data width of 0 and a Total Width of 8 would indicate that the device is solely being used to provide eight error correction bits. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryType | 1.3.6.1.4.1.412.2.4.35.1.9 | ||
| Type of memory used in this memory device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dRAM(3), eDRAM(4), vRAM(5), sRAM(6), rAM(7), rOM(8), fLASH(9), eEPROM(10), fEPROM(11), ePROM(12) | ||
| typeDetail | 1.3.6.1.4.1.412.2.4.35.1.10 | ||
| Additional detail on the device type. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), fastPaged(3), staticColumn(4), pseudoStatic(5), rAMBUS(6), synchronous(7), cMOS(8), eDO(9), windowDRAM(10), cacheDRAM(11), nonVolatile(12) | ||
| deviceSet | 1.3.6.1.4.1.412.2.4.35.1.11 | ||
| This attribute is used to identify when the Memory Device is one of a set of Memory Devices that must be populated with all devices of the same type and size, and which set the device belongs to. For example, when one SIMM belongs to a set of four. 0 indicates the Memory Device isn't part of a set. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceErrorType | 1.3.6.1.4.1.412.2.4.35.1.12 | ||
| The type of error that is associated with the current status reported in Operational State for this Memory Device. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), badRead(4), parityError(5), singleBitError(6), doubleBitError(7), multiBitError(8), nibbleError(9), checksumError(10), cRCError(11), correctedSingleBitError(12), correctedError(13), uncorrectableError(14) | ||
| errorGranularity | 1.3.6.1.4.1.412.2.4.35.1.13 | ||
| Specifies whether the current error's location can be resolved to the partition or device level. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), deviceLevel(3), memoryPartitionLevel(4) | ||
| lastErrorUpdate | 1.3.6.1.4.1.412.2.4.35.1.14 | ||
| System state during which the last error update was collected. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), noUpdateSinceLastInstrumentationStart(3), updatedFromInformationObtainedPriorToInstrumentati(4), updatedDuringInstrumentationRunTime(5) | ||
| errorOperation | 1.3.6.1.4.1.412.2.4.35.1.15 | ||
| The memory access operation that caused the current error. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), read(3), write(4), partialWrite(5) | ||
| errorDataSize | 1.3.6.1.4.1.412.2.4.35.1.16 | ||
| The size of the data transfer that caused the error,in bits. Zero indicates no error, 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| errorData | 1.3.6.1.4.1.412.2.4.35.1.17 | ||
| Data captured during the erroneous Memory Array access. The data occupies the first n bytes of the octet string required to hold 'Error Data Size' bits of the data. Data is stored least-significant byte first. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| vendorSyndrome | 1.3.6.1.4.1.412.2.4.35.1.18 | ||
| Vendor-specific syndrome or CRC data associated with the erroneous access. | |||
| OBJECT-TYPE | |||
| DmiOctetstring | |||
| deviceErrorAddress | 1.3.6.1.4.1.412.2.4.35.1.19 | ||
| Physical address of the error relative to the start of the device, in bytes. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| arrayErrorAddress | 1.3.6.1.4.1.412.2.4.35.1.20 | ||
| Physical address of the kilobyte where the error is located, relative to the bus for the Memory Array. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| errorResolution | 1.3.6.1.4.1.412.2.4.35.1.21 | ||
| Range in bytes that the error can be determined to be within,whe an Error Address is given. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.35.1.22 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.35.1.23 | ||
| The index into the Operational State Table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfMemoryDeviceMappedAddressesTable | 1.3.6.1.4.1.412.2.4.36 | ||
| This table presents ranges of physical addresses that are mapped to a given Memory Device Set. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMemoryDeviceMappedAddresses | |||
| dmtfMemoryDeviceMappedAddressesEntry | 1.3.6.1.4.1.412.2.4.36.1 | ||
| This table presents ranges of physical addresses that are mapped to a given Memory Device Set. | |||
| OBJECT-TYPE | |||
| SdmtfMemoryDeviceMappedAddresses | |||
| dmtfMemoryDeviceMappedAddressesState | 1.3.6.1.4.1.412.2.4.36.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| memoryDeviceMappedAddressesTableIndex | 1.3.6.1.4.1.412.2.4.36.1.1 | ||
| A unique number that identifies this row. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| memoryDeviceSetID | 1.3.6.1.4.1.412.2.4.36.1.2 | ||
| The row in the Memory Device table that this address range is for. This matches with a Memory Device Table Index. There may be multiple rows in Memory Device Mapped addresses for a single Memory Device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partition | 1.3.6.1.4.1.412.2.4.36.1.3 | ||
| Identifies the Memory partition in the Memory Array Mapped Addresses table that this Memory Device is part of. Partition number should be positive. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mappedRangeStartingAddress | 1.3.6.1.4.1.412.2.4.36.1.4 | ||
| The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Device set. The address is specified relative to the bus that the device is connected to. 0x80000000 denotes 'unknown . | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| mappedRangeEndingAddress | 1.3.6.1.4.1.412.2.4.36.1.5 | ||
| The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Device. The address is specified relative to the bus that the device is connected to. 0x80000000 denotes 'unknown . | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| partitionRowPosition | 1.3.6.1.4.1.412.2.4.36.1.6 | ||
| This specifies the position of the device in a row of the partition. For example, if it takes two 8-bit memory devices to form a 16-bit row, then a value of '2'in this attribute means the device is the second device. 0 is an invalid return value. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| interleavePosition | 1.3.6.1.4.1.412.2.4.36.1.7 | ||
| The position of this device in an interleave. 0 indicates non-interleaved. 1 indicates the first position 2 the second, and so on. For example, in a 2:1 interleave, a value of '1' would indicate the device is in the 'even' position, in a 4:1 interleave this would be the first of four possible positions). 0x80000000 denotes 'unknown' or'unsupported'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dataDepth | 1.3.6.1.4.1.412.2.4.36.1.8 | ||
| The maximum number of consecutive rows accessed from this device in a single interleaved transfer. For example, if a device transfers two rows each time it is read, its Interleaved Data Depth would be 2. If that device is 2:1 interleaved and in Interleave Position '1', then the rows mapped to that device would be rows 1,2,5,6,9,10, etc. If the device is not part of an interleave, this value should be 0. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfSystemResources2Table | 1.3.6.1.4.1.412.2.4.37 | ||
| This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemResources2 | |||
| dmtfSystemResources2Entry | 1.3.6.1.4.1.412.2.4.37.1 | ||
| This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. | |||
| OBJECT-TYPE | |||
| SdmtfSystemResources2 | |||
| dmtfSystemResources2State | 1.3.6.1.4.1.412.2.4.37.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourcesIndex | 1.3.6.1.4.1.412.2.4.37.1.1 | ||
| A number that uniquely identifies the rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceUser | 1.3.6.1.4.1.412.2.4.37.1.2 | ||
| A unique number for each different 'resource user' that has resources specified in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceSet | 1.3.6.1.4.1.412.2.4.37.1.3 | ||
| A number used as the ID of a set of Memory, I/O, DMA and/or INT resources for the resource user. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceAssignment | 1.3.6.1.4.1.412.2.4.37.1.4 | ||
| Describes the state of the assignment of this set of resources. (Note: This value must be the same for all resources within a given set.) | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), allocated(3), assignable(4), temporaryAssignment(5) | ||
| resourceType | 1.3.6.1.4.1.412.2.4.37.1.5 | ||
| The type of resource described by this row. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), memory(3), iO(4), iRQ(5), dMA(6) | ||
| resourceNumber | 1.3.6.1.4.1.412.2.4.37.1.6 | ||
| DMA or IRQ number - 0 for Memory and I/O ranges. This is the interrupt or DMA number relative to the bus that the interrupt is sourced from. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| resourceInfoID | 1.3.6.1.4.1.412.2.4.37.1.7 | ||
| ID of the row in the 'Info' table for this type of system resource. E.g. if this Resource Type is 'I/O' then this would be an index into the 'System Resource I/O Info' table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| startAddress | 1.3.6.1.4.1.412.2.4.37.1.8 | ||
| Starting physical address for this memory range, or the minimum base address if this attribute is being used to describe a programmable range. 0 for IRQ and DMA resources. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| endAddress | 1.3.6.1.4.1.412.2.4.37.1.9 | ||
| Ending physical address (address of last byte) for this memory range, or the maximum configurable base address if this attribute is being used to describe a programmable range. 0 for IRQ and DMA resources. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| resourceSize | 1.3.6.1.4.1.412.2.4.37.1.10 | ||
| jNumber of consecutive bytes that a memory or I/O resource consumes. 0 for IRQ and DMA resources. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| baseAlignment | 1.3.6.1.4.1.412.2.4.37.1.11 | ||
| Alignment of Start Address, in bytes. Indicates the granularity of the increments in which a programmable range can be set. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| shareable | 1.3.6.1.4.1.412.2.4.37.1.12 | ||
| Indicates whether the resource is shareable. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| shared | 1.3.6.1.4.1.412.2.4.37.1.13 | ||
| Indicates whether this resource, or a portion of this resource, is shared with another device. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| dmtfSystemResourceDeviceInfoTable | 1.3.6.1.4.1.412.2.4.38 | ||
| This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemResourceDeviceInfo | |||
| dmtfSystemResourceDeviceInfoEntry | 1.3.6.1.4.1.412.2.4.38.1 | ||
| This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. | |||
| OBJECT-TYPE | |||
| SdmtfSystemResourceDeviceInfo | |||
| dmtfSystemResourceDeviceInfoState | 1.3.6.1.4.1.412.2.4.38.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| resourceUser | 1.3.6.1.4.1.412.2.4.38.1.1 | ||
| A number that uniquely identifies this device. This number may be derived from the 'device number' that is assigned by 'Plug N Play', or may be uniquely assigned by the component instrumentation. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceID | 1.3.6.1.4.1.412.2.4.38.1.2 | ||
| Physical Device ID from Config manager info. Equal to the CISTPL-MANFID field for PCMCIA devices. 0xFFFFFFFF = Unknown | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceSerialNumber | 1.3.6.1.4.1.412.2.4.38.1.3 | ||
| Device Serial Number from Config manager info. 0 = Undefined | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalDeviceIDClassCode | 1.3.6.1.4.1.412.2.4.38.1.4 | ||
| Logical device ID for PnP ISA devices, Class code for PCI devices, CISTPL-FUNCID for PCMCIA devices. 0xFFFFFFFF = Undefined, 0 = reserved | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceFlags | 1.3.6.1.4.1.412.2.4.38.1.5 | ||
| Device flags from config manager info. Bit 0: 1 = device has been initialized, Bit 1: 1 = device is enabled, Bit 2: 1 = device config has been locked, Bit 3: 1 = device has temporary config resources assigned, Bit 4: 1 = device is reconfigurable | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| deviceNumber | 1.3.6.1.4.1.412.2.4.38.1.6 | ||
| Device Number for PCI Devices, Logical Device number for PnP Devices. 0 otherwise. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| functionNumber | 1.3.6.1.4.1.412.2.4.38.1.7 | ||
| Function Number for PCI & EISA Devices. 0 otherwise. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| busType | 1.3.6.1.4.1.412.2.4.38.1.8 | ||
| Bus number (0-255) for PCI Devices, Slot number for EISA and PnP Devices, Card logical socket number for PCMCIA devices. Zero otherwise. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| cMReserved | 1.3.6.1.4.1.412.2.4.38.1.9 | ||
| Data from the Reserved field of the Configuration Manager bus access structure, or 0. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfSystemResourceMemoryInfoTable | 1.3.6.1.4.1.412.2.4.39 | ||
| This group presents additional information about memory resource that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemResourceMemoryInfo | |||
| dmtfSystemResourceMemoryInfoEntry | 1.3.6.1.4.1.412.2.4.39.1 | ||
| This group presents additional information about memory resource that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SdmtfSystemResourceMemoryInfo | |||
| dmtfSystemResourceMemoryInfoState | 1.3.6.1.4.1.412.2.4.39.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourceMemoryInfoIndex | 1.3.6.1.4.1.412.2.4.39.1.1 | ||
| A number the uniquely identifies rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| iSAPCMCIARangeDescriptor | 1.3.6.1.4.1.412.2.4.39.1.2 | ||
| For PnP ISA/PCMCIA memory range descriptor compatibility. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8BitMemoryOnly(3), x16BitMemoryOnly(4), x8And16BitMemorySupported(5), x32BitMemoryOnly(6) | ||
| eISARangeDescriptor | 1.3.6.1.4.1.412.2.4.39.1.3 | ||
| For PnP EISA memory range descriptor compatibility. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8BitMemoryOnly(3), x16BitMemoryOnly(4), x8And16BitMemorySupported(5), x32BitMemoryOnly(6) | ||
| decodeSupport | 1.3.6.1.4.1.412.2.4.39.1.4 | ||
| For PnP memory range descriptor compatibility. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), decodeSupportsHighAddress(3), decodeSupportsRangeLength(4) | ||
| cacheable | 1.3.6.1.4.1.412.2.4.39.1.5 | ||
| Indicates whether it is allowable for this memory range to be cached or not. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| cacheType | 1.3.6.1.4.1.412.2.4.39.1.6 | ||
| Indicates Cache Type that is compatible with this resource. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), writeBack-1(3), writeThrough-1(4) | ||
| readWrite | 1.3.6.1.4.1.412.2.4.39.1.7 | ||
| Indicates the read-write accessibility of this memory resource. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), rOMReadOnly(3), rAMReadwrite(4) | ||
| dmtfSystemResourceIOInfoTable | 1.3.6.1.4.1.412.2.4.40 | ||
| This group presents additional information about I/O resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemResourceIOInfo | |||
| dmtfSystemResourceIOInfoEntry | 1.3.6.1.4.1.412.2.4.40.1 | ||
| This group presents additional information about I/O resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SdmtfSystemResourceIOInfo | |||
| dmtfSystemResourceIOInfoState | 1.3.6.1.4.1.412.2.4.40.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourceIOInfoIndex | 1.3.6.1.4.1.412.2.4.40.1.1 | ||
| A number the uniquely identifies rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| iODecode | 1.3.6.1.4.1.412.2.4.40.1.2 | ||
| Number of bits used for I/O decode | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x10Bits(3), x16Bits(4) | ||
| dmtfSystemResourceIRQInfoTable | 1.3.6.1.4.1.412.2.4.41 | ||
| This group presents additional information about I/O resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemResourceIRQInfo | |||
| dmtfSystemResourceIRQInfoEntry | 1.3.6.1.4.1.412.2.4.41.1 | ||
| This group presents additional information about I/O resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SdmtfSystemResourceIRQInfo | |||
| dmtfSystemResourceIRQInfoState | 1.3.6.1.4.1.412.2.4.41.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourceIRQInfoIndex | 1.3.6.1.4.1.412.2.4.41.1.1 | ||
| A number the uniquely identifies rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| triggerType | 1.3.6.1.4.1.412.2.4.41.1.2 | ||
| The trigger type for this interrupt. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), level(3), edge(4) | ||
| triggerLevel | 1.3.6.1.4.1.412.2.4.41.1.3 | ||
| The trigger level for this interrupt. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), activeLow(3), activeHigh(4) | ||
| dmtfSystemResourceDMAInfoTable | 1.3.6.1.4.1.412.2.4.42 | ||
| This group presents additional information about DMA resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemResourceDMAInfo | |||
| dmtfSystemResourceDMAInfoEntry | 1.3.6.1.4.1.412.2.4.42.1 | ||
| This group presents additional information about DMA resources that have been defined in the System Resources table. | |||
| OBJECT-TYPE | |||
| SdmtfSystemResourceDMAInfo | |||
| dmtfSystemResourceDMAInfoState | 1.3.6.1.4.1.412.2.4.42.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| systemResourceDMAInfoIndex | 1.3.6.1.4.1.412.2.4.42.1.1 | ||
| A number the uniquely identifies rows in this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMATransferWidth | 1.3.6.1.4.1.412.2.4.42.1.2 | ||
| Width of DMA transfers supported | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8Bit(3), x8And16Bit(4), x16Bit(5), x32Bit(6), x64Bit(7), x128Bit(8) | ||
| dMAAddressSize | 1.3.6.1.4.1.412.2.4.42.1.3 | ||
| The width of the DMA address. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8Bit(3), x16Bit(5), x32Bit(6), x64Bit(7) | ||
| dMAMaximumTransferSize | 1.3.6.1.4.1.412.2.4.42.1.4 | ||
| The maximum number of bytes that can be transferred by this DMA Channel. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dMATransferPreference | 1.3.6.1.4.1.412.2.4.42.1.5 | ||
| DMA transfer type preference. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), x8Bit(3), x8And16Bit(4), x16Bit(5), x32Bit(6), x64Bit(7) | ||
| busMaster | 1.3.6.1.4.1.412.2.4.42.1.6 | ||
| Indicates whether the device is using DMA is a bus master. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), logicalDeviceIsNotABusMaster(3), logicalDeviceIsABusMaster(4) | ||
| byteMode | 1.3.6.1.4.1.412.2.4.42.1.7 | ||
| Indicates whether DMA may execute in 'count by byte' mode. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dMAMayNotExecuteInCountByByteMode(3), dMAMayExecuteInCountByByteMode(4) | ||
| wordMode | 1.3.6.1.4.1.412.2.4.42.1.8 | ||
| Indicates whether DMA may execute in 'count by word' mode. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), dMAMayNotExecuteInCountByWordMode(3), dMAMayExecuteInCountByWordMode(4) | ||
| channelTiming | 1.3.6.1.4.1.412.2.4.42.1.9 | ||
| DMA channel speed support. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), iSACompatible(3), typeA(4), typeB(5), typeF(6) | ||
| typeCTiming | 1.3.6.1.4.1.412.2.4.42.1.10 | ||
| Indicates whether C type (burst) timing is supported. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), iSACompatible(3), cTypeTimingIsNotSupported(4), cTypeTimingIsSupported(5) | ||
| dmtfMassStoreMappingTable | 1.3.6.1.4.1.412.2.4.43 | ||
| This table represents mappings between logical drives and logical or physical drive segments. Each entry in this table describes *one* such mapping. A logical drive may be composed of one, *or more*, such mappings. A segment may be a part of a physical or logical drive or, in the degenerate case, the entire drive may be one segment. The table also contains two fields, namely: (a) 'Parent Drive' a unique index into the Mass Store Logical Drives Table describing the logical drive involved in the mapping, | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMassStoreMappingTable | |||
| dmtfMassStoreMappingEntry | 1.3.6.1.4.1.412.2.4.43.1 | ||
| This table represents mappings between logical drives and logical or physical drive segments. Each entry in this table describes *one* such mapping. A logical drive may be composed of one, *or more*, such mappings. A segment may be a part of a physical or logical drive or, in the degenerate case, the entire drive may be one segment. The table also contains two fields, namely: (a) 'Parent Drive' a unique index into the Mass Store Logical Drives Table describing the logical drive involved in the mapping, | |||
| OBJECT-TYPE | |||
| SdmtfMassStoreMappingTable | |||
| dmtfMassStoreMappingTableState | 1.3.6.1.4.1.412.2.4.43.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| mappingIndex | 1.3.6.1.4.1.412.2.4.43.1.1 | ||
| Unique index into the Mass Store Mapping Table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| parentDrive | 1.3.6.1.4.1.412.2.4.43.1.2 | ||
| Unique index into the Mass Store Logical Drives Table of the entry that represents the parent drive in this mapping. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| childSegment | 1.3.6.1.4.1.412.2.4.43.1.3 | ||
| This field contains the index of the logical or physical segment that is one of the constituents of the parent logical drive referenced by the attribute 'Parent Drive'.This index is a key into the Mass Store Segment Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfMassStoreSegmentTable | 1.3.6.1.4.1.412.2.4.44 | ||
| This table describes the various segments on the various physical or logical drives in the component. In some cases a segment may represent an entire drive. In other cases there may be multiple segments on a drive. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMassStoreSegmentTable | |||
| dmtfMassStoreSegmentEntry | 1.3.6.1.4.1.412.2.4.44.1 | ||
| This table describes the various segments on the various physical or logical drives in the component. In some cases a segment may represent an entire drive. In other cases there may be multiple segments on a drive. | |||
| OBJECT-TYPE | |||
| SdmtfMassStoreSegmentTable | |||
| dmtfMassStoreSegmentTableState | 1.3.6.1.4.1.412.2.4.44.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| segmentIndex | 1.3.6.1.4.1.412.2.4.44.1.1 | ||
| This is a unique index for this segment and is used as a key into this table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| segmentType | 1.3.6.1.4.1.412.2.4.44.1.2 | ||
| Describes whether the segment is a physical segment on a physical drive or a logical segment on a logical drive. If the value of this attribute is 'Physical' then the physical drive is identified in the Disks table by Drive Key 1 and Drive Key 2 attributes. If the value of this attribute is 'Logical' then the logical drive is identified in the Mass Store Logical Drives table by the Drive Key 2 attribute and the Drive Key 1 attribute is irrelevant | |||
| OBJECT-TYPE | |||
| INTEGER | physical(1), logical(2) | ||
| segmentStart | 1.3.6.1.4.1.412.2.4.44.1.3 | ||
| This is the index of the allocation unit on the drive at which the media extent corresponding to this segment starts. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| segmentLength | 1.3.6.1.4.1.412.2.4.44.1.4 | ||
| This is the length of the segment in allocation units inclusive of the starting allocation unit whose index is contained in the attribute 'Segment Start'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| segmentAllocationUnit | 1.3.6.1.4.1.412.2.4.44.1.5 | ||
| The value of this attribute identifies the type of unit of space that can be allocated on the drive. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), physicalSector(3), logicalBlock(4) | ||
| segmentAllocationState | 1.3.6.1.4.1.412.2.4.44.1.6 | ||
| The value of this attribute identifies the current allocation state of the segment represented by this table entry. NOTE: Reserved = This segment is reserved for vendor use (DO NOT USE this segment for other purposes); Spare = This segment is currently in use being held in reserve for hot sparing. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), allocated(3), available(4), defective(5), reserved-1(6), spare(7) | ||
| driveKey1 | 1.3.6.1.4.1.412.2.4.44.1.7 | ||
| If Segment Type is 'Physical' this is one of two keys used to identify a specific disk in the Disks group. If the Segment Type is 'Logical' this attribute is unused and its value is irrelevant. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), hardDisk(3), floppyDisk(4), opticalROM(5), opticalWORM(6), opticalRW(7), compactDisk(8), flashDisk(9), bernoulli(10), opticalFloppyDisk(11) | ||
| driveKey2 | 1.3.6.1.4.1.412.2.4.44.1.8 | ||
| (A) If the value of the attribute Segment Type is 'Physical' then this attribute holds the second of two keys that identify the physical drive in the Disks table group. (B) If the value of the Segment Type is 'Logical then this is the single integer key that identifies the logical drive in the Mass Store Logical Drives table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfMassStoreLogicalDrivesTable | 1.3.6.1.4.1.412.2.4.45 | ||
| This table describes the logical drives contained in this component. Logical drives are typically composed of one or more other logical drives or physical segments. Each entry of this table contains information about the size of a logical drive, its string name as set by driver software, and a boolean that describes whether this logical drive is at the top of the logical drive hierarchy or not. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMassStoreLogicalDrivesTable | |||
| dmtfMassStoreLogicalDrivesTraps | 1.3.6.1.4.1.412.2.4.45.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfMassStoreLogicalDrivesPhysicalDeviceStatusChange | 1.3.6.1.4.1.412.2.4.45.0.1 | ||
| The status of a Logical Disk Drive (e.g., file system volume) has changed. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMassStoreLogicalDrivesEvSys | |||
| dmtfMassStoreLogicalDrivesEvSub | |||
| dmtfMassStoreLogicalDrivesHotSpareActivated | 1.3.6.1.4.1.412.2.4.45.0.2 | ||
| The 'hot-swap spare' for an inoperable logical disk drive has been activated. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMassStoreLogicalDrivesEvSys | |||
| dmtfMassStoreLogicalDrivesEvSub | |||
| dmtfMassStoreLogicalDrivesLogicalDeviceStatusChange | 1.3.6.1.4.1.412.2.4.45.0.3 | ||
| logicalDeviceStatusChange | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMassStoreLogicalDrivesEvSys | |||
| dmtfMassStoreLogicalDrivesEvSub | |||
| dmtfMassStoreLogicalDrivesInitializationFailure | 1.3.6.1.4.1.412.2.4.45.0.4 | ||
| A logical disk drive on the system failed to initialize properly during system startup. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMassStoreLogicalDrivesEvSys | |||
| dmtfMassStoreLogicalDrivesEvSub | |||
| dmtfMassStoreLogicalDrivesConfigurationError | 1.3.6.1.4.1.412.2.4.45.0.5 | ||
| A logical disk drive on the system is not properly configured | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfMassStoreLogicalDrivesEvSys | |||
| dmtfMassStoreLogicalDrivesEvSub | |||
| dmtfMassStoreLogicalDrivesEntry | 1.3.6.1.4.1.412.2.4.45.1 | ||
| This table describes the logical drives contained in this component. Logical drives are typically composed of one or more other logical drives or physical segments. Each entry of this table contains information about the size of a logical drive, its string name as set by driver software, and a boolean that describes whether this logical drive is at the top of the logical drive hierarchy or not. | |||
| OBJECT-TYPE | |||
| SdmtfMassStoreLogicalDrivesTable | |||
| dmtfMassStoreLogicalDrivesTableState | 1.3.6.1.4.1.412.2.4.45.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| logicalDriveIndex | 1.3.6.1.4.1.412.2.4.45.1.1 | ||
| A unique index (key) into the Mass Store Logical Drives Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| topOfHierarchy | 1.3.6.1.4.1.412.2.4.45.1.2 | ||
| This attribute identifies whether the logical drive represented by this entry is a part of some higher order logical drive or not. If the value of this boolean attribute is TRUE, then this means that this logical drive is not a constituent part of any other logical drive in this component. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| driveArray | 1.3.6.1.4.1.412.2.4.45.1.3 | ||
| This boolean attribute identifies whether the logical drive represented by this table entry is composed of an array of drives or not. If the value of this attribute is TRUE, then the entry with the same index (as this entry) in the Mass Store Array Info Table will give information about the drive array that comprises this logical drive | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| logicalDriveSizeInKB | 1.3.6.1.4.1.412.2.4.45.1.4 | ||
| This attribute holds the size of this logical drive in kilobytes | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalDriveBlockSizeInBytes | 1.3.6.1.4.1.412.2.4.45.1.5 | ||
| This attribute holds the size of the allocatable unit of storage on this logical drive. The size of the allocatable unit is given in bytes | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| logicalDriveNameString | 1.3.6.1.4.1.412.2.4.45.1.6 | ||
| This attribute is simply a container for a string name for the logical drive. The instrumentation code does not assign or manipulate this attribute. It is simply a convenience provided so that driver software may put in this container the string name by which it refers to this logical drive. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfMassStoreLogicalDrivesEvSys | 1.3.6.1.4.1.412.2.4.45.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfMassStoreLogicalDrivesEvSub | 1.3.6.1.4.1.412.2.4.45.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfMassStoreArrayInfoTable | 1.3.6.1.4.1.412.2.4.46 | ||
| This table is a parallel table to the Mass Store Logical Drives Table; it has entries keyed by the same unique index as is used for the logical drives table. This table has one entry corresponding to each entry in the Mass Store Logical Drives Table whose 'Drive Array' field is set to TRUE. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfMassStoreArrayInfoTable | |||
| dmtfMassStoreArrayInfoEntry | 1.3.6.1.4.1.412.2.4.46.1 | ||
| This table is a parallel table to the Mass Store Logical Drives Table; it has entries keyed by the same unique index as is used for the logical drives table. This table has one entry corresponding to each entry in the Mass Store Logical Drives Table whose 'Drive Array' field is set to TRUE. | |||
| OBJECT-TYPE | |||
| SdmtfMassStoreArrayInfoTable | |||
| dmtfMassStoreArrayInfoTableState | 1.3.6.1.4.1.412.2.4.46.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| logicalDriveIndex | 1.3.6.1.4.1.412.2.4.46.1.1 | ||
| This is the same index as the 'Logical Drive Index' field in the Mass Store Logical Drives Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| driveArrayLevel | 1.3.6.1.4.1.412.2.4.46.1.2 | ||
| This attribute is an Enum of the different possible types of drive arrays that could compose the logical drive represented by the correspo ding entry in the Mass Store Logical Drives Table. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), rAID0(3), rAID1(4), rAID2(5), rAID3(6), rAID4(7), rAID5(8), rAID7(9), rAID10(10) | ||
| driveArrayRedundancyStatus | 1.3.6.1.4.1.412.2.4.46.1.5 | ||
| This attribute identifies which of the different states of the available redundancy in the drive array currently applies. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), fullyRedundant(3), degradedRedundancy(4), redundancyLost(5), notApplicableUnitNotRedundant-1(6), unitFailed(7) | ||
| driveArrayOperationInProgress | 1.3.6.1.4.1.412.2.4.46.1.6 | ||
| This value of this attribute describes whether the drive array is currently undergoing array operations of some sort. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), verify(3), rebuild(5), none(6) | ||
| dmtfSequentialAccessDevicesTable | 1.3.6.1.4.1.412.2.4.47 | ||
| This table describes each sequential access device in the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSequentialAccessDevices | |||
| dmtfSequentialAccessDevicesEntry | 1.3.6.1.4.1.412.2.4.47.1 | ||
| This table describes each sequential access device in the system. | |||
| OBJECT-TYPE | |||
| SdmtfSequentialAccessDevices | |||
| dmtfSequentialAccessDevicesState | 1.3.6.1.4.1.412.2.4.47.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| sequentialAccessIndex | 1.3.6.1.4.1.412.2.4.47.1.1 | ||
| Unique index into the Sequential Access Devices table for this Sequential Access Device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| maximumSequentialMediaSize | 1.3.6.1.4.1.412.2.4.47.1.2 | ||
| Maximum size, in KB, of media supported by this device | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentSequentialMediaSize | 1.3.6.1.4.1.412.2.4.47.1.3 | ||
| Current size, in KB, of media in this drive. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| sequentialMediaPresent | 1.3.6.1.4.1.412.2.4.47.1.4 | ||
| Indicates the presence of a media in the drive. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| sequentialMediaTechnology | 1.3.6.1.4.1.412.2.4.47.1.5 | ||
| Indicates the type of tapes supported by the drive. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), pEGCR(3), x3480Compatible(4), x3490ECompatible(5), dDS1(6), dDS2(7), dDS3(8), x8mm82xx(9), x8mm85xx(10), x8mmMammoth(11), qIC24(12), qIC525(13), qICOther(14), miniCartridgeQIC80(15), miniCartridgeOther(16), travan(17), dLT2000(18), dLT4000(19) | ||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.47.1.6 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides index into the FRU table. A Value = -1 means that the group is not a FRU | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.47.1.7 | ||
| The index into the Operational State Table for this device, if applicable. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfSystemResetTable | 1.3.6.1.4.1.412.2.4.48 | ||
| This group defines whether Automatic System Reset functions are available (Capability) and enabled (Status). If the system has a watchdog Timer and the timer is not reset (Timer Reset) before the Interval elapses, an automatic system reset will occur. The system will re-boot according to the Boot Option. This function may repeat until the Limit is reached, at which time the system will re-boot according to the Boot Option at Limit. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemReset | |||
| dmtfSystemResetTraps | 1.3.6.1.4.1.412.2.4.48.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfSystemResetSystemUp | 1.3.6.1.4.1.412.2.4.48.0.1 | ||
| The system is up and running after having automatically re-booted due to some (abnormal) reset condition. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfSystemResetEvSys | |||
| dmtfSystemResetEvSub | |||
| dmtfSystemResetEntry | 1.3.6.1.4.1.412.2.4.48.1 | ||
| This group defines whether Automatic System Reset functions are available (Capability) and enabled (Status). If the system has a watchdog Timer and the timer is not reset (Timer Reset) before the Interval elapses, an automatic system reset will occur. The system will re-boot according to the Boot Option. This function may repeat until the Limit is reached, at which time the system will re-boot according to the Boot Option at Limit. | |||
| OBJECT-TYPE | |||
| SdmtfSystemReset | |||
| automaticSystemResetCapability | 1.3.6.1.4.1.412.2.4.48.1.1 | ||
| Indicates whether Automatic System Reset Capability is available for the current operating system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), available(3), notAvailable(4) | ||
| automaticSystemResetStatus | 1.3.6.1.4.1.412.2.4.48.1.2 | ||
| Indicates whether Automatic System Reset is enabled by the user. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), enabled(3), disabled(4) | ||
| automaticSystemResetBootOption | 1.3.6.1.4.1.412.2.4.48.1.3 | ||
| Indicates whether Automatic System Reset will boot to the operating system, boot to utilities, or not re-boot. This is the action to be taken following a reset. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), operatingSystem(3), utilities(4), doNotReBoot(5) | ||
| automaticSystemResetCount | 1.3.6.1.4.1.412.2.4.48.1.4 | ||
| The number of Automatic System Resets since last intentional reset. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| automaticSystemResetLimit | 1.3.6.1.4.1.412.2.4.48.1.5 | ||
| The number of consecutive times the Automatic System Reset will be attempted. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| automaticSystemResetBootOptionAtLimit | 1.3.6.1.4.1.412.2.4.48.1.6 | ||
| Indicates the action to be taken when the Automatic System Reset Limit is reached. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), operatingSystem(3), utilities(4), doNotReBoot(5) | ||
| automaticSystemResetTimerPresent | 1.3.6.1.4.1.412.2.4.48.1.7 | ||
| Indicates whether this system has a watchdog timer. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| automaticSystemResetTimerInterval | 1.3.6.1.4.1.412.2.4.48.1.8 | ||
| The number of minutes to use for watchdog timer. If the timer is not reset within this interval, the automatic system reset timeout will begin. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| automaticSystemResetTimerReset | 1.3.6.1.4.1.412.2.4.48.1.9 | ||
| Initiate the reset of the automatic system reset watchdog timer. Setting this attribute to True will cause the watchdog timer to reset. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| systemResetTimeout | 1.3.6.1.4.1.412.2.4.48.1.10 | ||
| This attribute identifies the number of minutes before the re-boot is initiated. It is used after system power cycle, system reset (local or remote), and automatic system reset. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| systemResetBootOption | 1.3.6.1.4.1.412.2.4.48.1.11 | ||
| Indicates whether to boot to the operating system or the utilities when a system reset or system power cycle is performed, either locally or remotely. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), operatingSystem(3), utilities(4), doNotReBoot(5) | ||
| dmtfSystemResetEvSys | 1.3.6.1.4.1.412.2.4.48.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfSystemResetEvSub | 1.3.6.1.4.1.412.2.4.48.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfSystemHardwareSecurityTable | 1.3.6.1.4.1.412.2.4.49 | ||
| This group describes the system-wide hardware security settings. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemHardwareSecurity | |||
| dmtfSystemHardwareSecurityTraps | 1.3.6.1.4.1.412.2.4.49.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfSystemHardwareSecuritySettingsChange | 1.3.6.1.4.1.412.2.4.49.0.1 | ||
| The security settings for the system hardware have changed. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfSystemHardwareSecurityEvSys | |||
| dmtfSystemHardwareSecurityEvSub | |||
| dmtfSystemHardwareSecurityContainerSecurityBreach | 1.3.6.1.4.1.412.2.4.49.0.2 | ||
| A secruity breach of the system hardware has occured. A secured component of the physical system has been accessed without proper authorization. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfSystemHardwareSecurityEvSys | |||
| dmtfSystemHardwareSecurityEvSub | |||
| dmtfSystemHardwareSecurityEntry | 1.3.6.1.4.1.412.2.4.49.1 | ||
| This group describes the system-wide hardware security settings. | |||
| OBJECT-TYPE | |||
| SdmtfSystemHardwareSecurity | |||
| powerOnPasswordStatus | 1.3.6.1.4.1.412.2.4.49.1.1 | ||
| The current power-on password setting on the system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), disabled(3), enabled(4), notImplemented(5) | ||
| keyboardPasswordStatus | 1.3.6.1.4.1.412.2.4.49.1.2 | ||
| The current keyboard password setting on the system | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), disabled(3), enabled(4), notImplemented(5) | ||
| administratorPasswordStatis | 1.3.6.1.4.1.412.2.4.49.1.3 | ||
| The current administrator password setting on the system. This password is required to make hardware configuration changes to the system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), disabled(3), enabled(4), notImplemented(5) | ||
| frontPanelResetStatus | 1.3.6.1.4.1.412.2.4.49.1.4 | ||
| The present status of the front panel reset button capability. If Enabled, the machine can be reset via the front panel reset button. If Disabled, the reset button, if available, is inoperative. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), disabled(3), enabled(4), notImplemented(5) | ||
| dmtfSystemHardwareSecurityEvSys | 1.3.6.1.4.1.412.2.4.49.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfSystemHardwareSecurityEvSub | 1.3.6.1.4.1.412.2.4.49.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfPowerSupplyOutputVoltageCapabilitiesTable | 1.3.6.1.4.1.412.2.4.50 | ||
| This group defines the voltage capabilities of the power supplies. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPowerSupplyOutputVoltageCapabilities | |||
| dmtfPowerSupplyOutputVoltageCapabilitiesEntry | 1.3.6.1.4.1.412.2.4.50.1 | ||
| This group defines the voltage capabilities of the power supplies. | |||
| OBJECT-TYPE | |||
| SdmtfPowerSupplyOutputVoltageCapabilities | |||
| dmtfPowerSupplyOutputVoltageCapabilitiesState | 1.3.6.1.4.1.412.2.4.50.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| outputVoltageCapabilitiesTableIndex | 1.3.6.1.4.1.412.2.4.50.1.1 | ||
| This is an index into this, the Output Voltage Capabilites table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerSupplyIndex | 1.3.6.1.4.1.412.2.4.50.1.2 | ||
| The Power Supply Index that identifies the physical power supply providing this voltage. 0 indicates that the capability applies to the Power Unit as a whole. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerUnitIndex | 1.3.6.1.4.1.412.2.4.50.1.3 | ||
| The Power Unit Index identifies the logical power subsystem that the physical supply is a member of. This value is obtained from the Power Unit Global Table Index attribute in the physical power supply group. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| outputVoltageCapabilityDescription | 1.3.6.1.4.1.412.2.4.50.1.4 | ||
| An expanded description of this Output Voltage Capability. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| nominalOutputVoltage | 1.3.6.1.4.1.412.2.4.50.1.5 | ||
| The nominal specified voltage for this output, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| outputVoltageLow | 1.3.6.1.4.1.412.2.4.50.1.6 | ||
| The lowest specified voltage for this output, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| outputVoltageHigh | 1.3.6.1.4.1.412.2.4.50.1.7 | ||
| The highest specified voltage for this output, in millivolts. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| outputHighFrequency | 1.3.6.1.4.1.412.2.4.50.1.8 | ||
| Maximum specified frequency of this output. 0 for DC. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| outputLowFrequency | 1.3.6.1.4.1.412.2.4.50.1.9 | ||
| Minimum specified frequency of this output. 0 for DC. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| recommendedMaximumOutputCurrent | 1.3.6.1.4.1.412.2.4.50.1.10 | ||
| Recommended maximum output current for this output, in milliamps 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| maximumOutputCurrent | 1.3.6.1.4.1.412.2.4.50.1.11 | ||
| Rated maximum output current for this output, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| minimumOutputCurrent | 1.3.6.1.4.1.412.2.4.50.1.12 | ||
| Rated minimum output current for this output, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeIndex | 1.3.6.1.4.1.412.2.4.50.1.13 | ||
| Index into the Voltage Probe table identifying the probe monitoring this output. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeIndex | 1.3.6.1.4.1.412.2.4.50.1.14 | ||
| Index into the Electrical Current Probe table identifying the current probe monitoring this output. 0 indicates no probe provided. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfSystemPowerControlsTable | 1.3.6.1.4.1.412.2.4.51 | ||
| This group defines attributes for controlling the main power supply to the system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemPowerControls | |||
| dmtfSystemPowerControlsEntry | 1.3.6.1.4.1.412.2.4.51.1 | ||
| This group defines attributes for controlling the main power supply to the system. | |||
| OBJECT-TYPE | |||
| SdmtfSystemPowerControls | |||
| powerControlRequest | 1.3.6.1.4.1.412.2.4.51.1.1 | ||
| Reading the value of this attribute gives the value of the last valid power control request that was written into it. Writing a valid value into it causes the appropriate power control action to be executed immediately. Writing an invalid or unimplemented value causes no change. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), powerOff(3), powerOffThenOnAgain(4), enterStandbyMode(5), enterSuspendMode(6), enterHibernationMode(7) | ||
| timedPowerOnAvailable | 1.3.6.1.4.1.412.2.4.51.1.2 | ||
| Defines whether a timed power-on facility is available. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| timeToNextScheduledPowerOn | 1.3.6.1.4.1.412.2.4.51.1.3 | ||
| The number of seconds until the next timed power-on is scheduled to occur. A value of 0 means that if the system is powered off, no automatic timed poweron will occur. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfUPSBatteryTable | 1.3.6.1.4.1.412.2.4.52 | ||
| The UPS Battery group contains information regarding the UPS system's battery status. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfUPSBattery | |||
| dmtfUPSBatteryTraps | 1.3.6.1.4.1.412.2.4.52.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfUPSBatteryStatusChange | 1.3.6.1.4.1.412.2.4.52.0.1 | ||
| The UPS Battery has changed status according to the event severity indicated. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfUPSBatteryEvSys | |||
| dmtfUPSBatteryEvSub | |||
| dmtfUPSBatteryUtilityPowerLostSystemOnBattery | 1.3.6.1.4.1.412.2.4.52.0.2 | ||
| The system has lost primary power and is now running on UPS Battery. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfUPSBatteryEvSys | |||
| dmtfUPSBatteryEvSub | |||
| dmtfUPSBatteryUtilityPowerUpSystemOffBattery | 1.3.6.1.4.1.412.2.4.52.0.3 | ||
| Primary power to the system has been restored. The UPS battery is no longer in use. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfUPSBatteryEvSys | |||
| dmtfUPSBatteryEvSub | |||
| dmtfUPSBatteryEntry | 1.3.6.1.4.1.412.2.4.52.1 | ||
| The UPS Battery group contains information regarding the UPS system's battery status. | |||
| OBJECT-TYPE | |||
| SdmtfUPSBattery | |||
| batteryStatus | 1.3.6.1.4.1.412.2.4.52.1.1 | ||
| The indication of the capacity remaining in the UPS system's batteries. A value of 'battery normal' indicates that the remaining estimated minutes of run-time is greater than the UPS's configured 'low battery time' (typically two minutes). A value of 'battery low' indicates that the remaining estimated minutes of battery run-time is less than or equal to the UPS's configured 'low battery time'. A value of 'battery depleted' indicates that the UPS will be unable to sustain the present load when and if | |||
| OBJECT-TYPE | |||
| INTEGER | unknown(1), batteryNormal(2), batteryLow(3), batteryDepleted(4) | ||
| secondsOnBattery | 1.3.6.1.4.1.412.2.4.52.1.2 | ||
| If the UPS is on battery power, the elapsed time in seconds since the UPS last switched to battery power, or the time since the UPS componen software was last restarted, whichever is less. Zero shall be returned if the UPS is not on battery power. | |||
| OBJECT-TYPE | |||
| DmiCounter | |||
| estimatedMinutesRemaining | 1.3.6.1.4.1.412.2.4.52.1.3 | ||
| An estimate in minutes of the time to battery charge depletion under the present load conditions if the utility power is off and remains off, or if it were to be lost and remain off. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| estimatedChargeRemaining | 1.3.6.1.4.1.412.2.4.52.1.4 | ||
| An estimate of the time to battery charge depletion under the present load conditions if the utility power is off and remains off, or if it were to be lost and remain off. The value represents a percent of full charge. | |||
| OBJECT-TYPE | |||
| DmiGauge | |||
| batteryVoltage | 1.3.6.1.4.1.412.2.4.52.1.5 | ||
| The magnitude of the present battery voltage in 0.1 volts DC. | |||
| OBJECT-TYPE | |||
| DmiGauge | |||
| batteryCurrent | 1.3.6.1.4.1.412.2.4.52.1.6 | ||
| The present battery current in 0.1 Amps DC. | |||
| OBJECT-TYPE | |||
| DmiGauge | |||
| temperatureProbeIndex | 1.3.6.1.4.1.412.2.4.52.1.7 | ||
| Index into the Temperature Probe table. This probe indicates the ambient temperature at or near the UPS battery casing. Zero implies no probe is present. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.52.1.8 | ||
| If this is a Field Replaceable Unit or it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.52.1.9 | ||
| The index into the Operational State table for this device. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfUPSBatteryEvSys | 1.3.6.1.4.1.412.2.4.52.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfUPSBatteryEvSub | 1.3.6.1.4.1.412.2.4.52.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfVoltageProbeTable | 1.3.6.1.4.1.412.2.4.53 | ||
| This group defines the attributes for the voltage probes in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfVoltageProbe | |||
| dmtfVoltageProbeTraps | 1.3.6.1.4.1.412.2.4.53.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfVoltageProbePowerSupplyStatusChange | 1.3.6.1.4.1.412.2.4.53.0.1 | ||
| A voltage probe on the system has detected an abnormal change in voltage level from one of the system's power supplies to the monitored component. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfVoltageProbeEvSys | |||
| dmtfVoltageProbeEvSub | |||
| dmtfVoltageProbeEntry | 1.3.6.1.4.1.412.2.4.53.1 | ||
| This group defines the attributes for the voltage probes in this system. | |||
| OBJECT-TYPE | |||
| SdmtfVoltageProbe | |||
| dmtfVoltageProbeState | 1.3.6.1.4.1.412.2.4.53.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| voltageProbeIndex | 1.3.6.1.4.1.412.2.4.53.1.1 | ||
| Index into this voltage probe table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeLocation | 1.3.6.1.4.1.412.2.4.53.1.2 | ||
| Identifies the physical location of the voltage probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), processor(3), disk(4), peripheralBay(5), systemManagementModule(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11) | ||
| voltageProbeDescription | 1.3.6.1.4.1.412.2.4.53.1.3 | ||
| Additional descriptive information about the voltage probe or probe's location. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| voltageStatus | 1.3.6.1.4.1.412.2.4.53.1.4 | ||
| Defines the status of the voltage monitored by this voltage probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| voltageProbeVoltageLevel | 1.3.6.1.4.1.412.2.4.53.1.5 | ||
| The current voltage level of this voltage probe in millivolts. 0x8000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredVoltageNominalLevel | 1.3.6.1.4.1.412.2.4.53.1.6 | ||
| The nominal voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredVoltageNormalMaximum | 1.3.6.1.4.1.412.2.4.53.1.7 | ||
| The normal maximum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredVoltageNormalMinimum | 1.3.6.1.4.1.412.2.4.53.1.8 | ||
| The normal minimum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeMaximum | 1.3.6.1.4.1.412.2.4.53.1.9 | ||
| The maximum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeMinimum | 1.3.6.1.4.1.412.2.4.53.1.10 | ||
| The minimum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelLowerThresholdNonCritical | 1.3.6.1.4.1.412.2.4.53.1.11 | ||
| The lower non-critical threshold for the voltage level set by the user, in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelUpperThresholdNonCritical | 1.3.6.1.4.1.412.2.4.53.1.12 | ||
| The upper non-critical threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelLowerThresholdCritical | 1.3.6.1.4.1.412.2.4.53.1.13 | ||
| The lower critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelUpperThresholdCritical | 1.3.6.1.4.1.412.2.4.53.1.14 | ||
| The upper critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelLowerThresholdNonRecoverable | 1.3.6.1.4.1.412.2.4.53.1.15 | ||
| The lower non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageLevelUpperThresholdNonRecoverable | 1.3.6.1.4.1.412.2.4.53.1.16 | ||
| The upper non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeResolution | 1.3.6.1.4.1.412.2.4.53.1.17 | ||
| The resolution for the reading from this voltage probe, in tenths of millivolts. '0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeTolerance | 1.3.6.1.4.1.412.2.4.53.1.18 | ||
| The tolerance for the reading from this voltage probe, in plus/minus millivolts. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| voltageProbeAccuracy | 1.3.6.1.4.1.412.2.4.53.1.19 | ||
| The accuracy for the reading from this voltage probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.53.1.20 | ||
| Index into the FRU table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.53.1.21 | ||
| Index into the Operational State table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfVoltageProbeEvSys | 1.3.6.1.4.1.412.2.4.53.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfVoltageProbeEvSub | 1.3.6.1.4.1.412.2.4.53.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfTemperatureProbeTable | 1.3.6.1.4.1.412.2.4.54 | ||
| This group defines the attributes for the temperature probes in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfTemperatureProbe | |||
| dmtfTemperatureProbeTraps | 1.3.6.1.4.1.412.2.4.54.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfTemperatureProbeCoolingDeviceStatusChange | 1.3.6.1.4.1.412.2.4.54.0.1 | ||
| A temperature probe on the system has detected an abnormal change in temperature of the system or a system component. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfTemperatureProbeEvSys | |||
| dmtfTemperatureProbeEvSub | |||
| dmtfTemperatureProbeEntry | 1.3.6.1.4.1.412.2.4.54.1 | ||
| This group defines the attributes for the temperature probes in this system. | |||
| OBJECT-TYPE | |||
| SdmtfTemperatureProbe | |||
| dmtfTemperatureProbeState | 1.3.6.1.4.1.412.2.4.54.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| temperatureProbeTableIndex | 1.3.6.1.4.1.412.2.4.54.1.1 | ||
| Index into this temperature probe table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeLocation | 1.3.6.1.4.1.412.2.4.54.1.2 | ||
| Identifies the physical location of the temperature probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), processor(3), disk(4), peripheralBay(5), sMBMaster(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11) | ||
| temperatureProbeDescription | 1.3.6.1.4.1.412.2.4.54.1.3 | ||
| Additional descriptive information about the temperature probe or probe's location. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| temperatureStatus | 1.3.6.1.4.1.412.2.4.54.1.4 | ||
| Defines the status of the temperature monitored by this temperat re probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| temperatureProbeTemperatureReading | 1.3.6.1.4.1.412.2.4.54.1.5 | ||
| The present temperature reading of this temperature probe in 1/10th degrees C. 0x8000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredTemperatureNominalReading | 1.3.6.1.4.1.412.2.4.54.1.6 | ||
| The nominal temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredTemperatureNormalMaximum | 1.3.6.1.4.1.412.2.4.54.1.7 | ||
| The normal maximum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredTemperatureNormalMinimum | 1.3.6.1.4.1.412.2.4.54.1.8 | ||
| The normal minimum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeMaximum | 1.3.6.1.4.1.412.2.4.54.1.9 | ||
| The maximum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeMinimum | 1.3.6.1.4.1.412.2.4.54.1.10 | ||
| The minimum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingLowerThresholdNonCritical | 1.3.6.1.4.1.412.2.4.54.1.11 | ||
| The lower non-critical threshold for the temperature reading set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingUpperThresholdNonCritical | 1.3.6.1.4.1.412.2.4.54.1.12 | ||
| The upper non-critical threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingLowerThresholdCritical | 1.3.6.1.4.1.412.2.4.54.1.13 | ||
| The lower critical threshold for the temperature probe, in 1/10 degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingUpperThresholdCritical | 1.3.6.1.4.1.412.2.4.54.1.14 | ||
| The upper critical threshold for the temperature probe, in /10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingLowerThresholdNonRecoverable | 1.3.6.1.4.1.412.2.4.54.1.15 | ||
| The lower non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureReadingUpperThresholdNonRecoverable | 1.3.6.1.4.1.412.2.4.54.1.16 | ||
| The upper non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeResolution | 1.3.6.1.4.1.412.2.4.54.1.17 | ||
| The resolution for the reading from this temperature probe, in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeTolerance | 1.3.6.1.4.1.412.2.4.54.1.18 | ||
| The tolerance for the reading from this temperature probe, in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| temperatureProbeAccuracy | 1.3.6.1.4.1.412.2.4.54.1.19 | ||
| The accuracy for the reading from this temperature probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or'unsupport d'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.54.1.20 | ||
| Index into the FRU table. A value of -1 indicates that this device is not an FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.54.1.21 | ||
| Index into the Operational State table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfTemperatureProbeEvSys | 1.3.6.1.4.1.412.2.4.54.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfTemperatureProbeEvSub | 1.3.6.1.4.1.412.2.4.54.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfElectricalCurrentProbeTable | 1.3.6.1.4.1.412.2.4.55 | ||
| This group defines the attributes for the current probes in this system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfElectricalCurrentProbe | |||
| dmtfElectricalCurrentProbeTraps | 1.3.6.1.4.1.412.2.4.55.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfElectricalCurrentProbePowerSupplyStatusChange | 1.3.6.1.4.1.412.2.4.55.0.1 | ||
| An electrical current probe on the system has detected an abnormal change in electrical current from a power supply to the monitored component of the system. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfElectricalCurrentProbeEvSys | |||
| dmtfElectricalCurrentProbeEvSub | |||
| dmtfElectricalCurrentProbeCoolingDeviceStatusChange | 1.3.6.1.4.1.412.2.4.55.0.2 | ||
| A cooling device (e.g., Fan) on the system has changed status due to loss of (or regained) electrical power. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfElectricalCurrentProbeEvSys | |||
| dmtfElectricalCurrentProbeEvSub | |||
| dmtfElectricalCurrentProbeEntry | 1.3.6.1.4.1.412.2.4.55.1 | ||
| This group defines the attributes for the current probes in this system. | |||
| OBJECT-TYPE | |||
| SdmtfElectricalCurrentProbe | |||
| dmtfElectricalCurrentProbeState | 1.3.6.1.4.1.412.2.4.55.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| electricalCurrentProbeTableIndex | 1.3.6.1.4.1.412.2.4.55.1.1 | ||
| Index into this electrical current probe table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeLocation | 1.3.6.1.4.1.412.2.4.55.1.2 | ||
| Identifies the physical location of the electrical current probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), processor(3), disk(4), peripheralBay(5), sMBMaster(6), motherboard(7), memoryModule(8), processorModule(9), powerUnit(10), addInCard(11) | ||
| electricalCurrentProbeDescription | 1.3.6.1.4.1.412.2.4.55.1.3 | ||
| Additional descriptive information about the electrical current probe or probe's location. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| electricalCurrentStatus | 1.3.6.1.4.1.412.2.4.55.1.4 | ||
| Defines the status of the electrical current monitored by this electrical current probe. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), nonCritical(4), critical(5), nonRecoverable(6) | ||
| electricalCurrentProbeReading | 1.3.6.1.4.1.412.2.4.55.1.5 | ||
| The present electrical current reading of this probe in milliamp . 0x8000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredElectricalCurrentNominalReading | 1.3.6.1.4.1.412.2.4.55.1.6 | ||
| The nominal electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredElectricalCurrentNormalMaximum | 1.3.6.1.4.1.412.2.4.55.1.7 | ||
| The normal maximum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| monitoredElectricalCurrentNormalMinimum | 1.3.6.1.4.1.412.2.4.55.1.8 | ||
| The normal minimum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeMaximum | 1.3.6.1.4.1.412.2.4.55.1.9 | ||
| The maximum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeMinimum | 1.3.6.1.4.1.412.2.4.55.1.10 | ||
| The minimum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingLowerThresholdNonCritical | 1.3.6.1.4.1.412.2.4.55.1.11 | ||
| The lower non-critical threshold for the electrical current reading set by the user, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingUpperThresholdNonCritical | 1.3.6.1.4.1.412.2.4.55.1.12 | ||
| The upper non-critical threshold for the electrical current reading, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingLowerThresholdCritical | 1.3.6.1.4.1.412.2.4.55.1.13 | ||
| The lower critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| currentReadingUpperThresholdCritical | 1.3.6.1.4.1.412.2.4.55.1.14 | ||
| The upper critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingLowerThresholdNonRecoverab | 1.3.6.1.4.1.412.2.4.55.1.15 | ||
| The lower non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentReadingUpperThresholdNonRecoverab | 1.3.6.1.4.1.412.2.4.55.1.16 | ||
| The upper non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeResolution | 1.3.6.1.4.1.412.2.4.55.1.17 | ||
| The resolution for the reading from this electrical current probe, in tenths of milliamps. '0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeTolerance | 1.3.6.1.4.1.412.2.4.55.1.18 | ||
| The tolerance for the reading from this electrical current probe, in plus/minus milliamps. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| electricalCurrentProbeAccuracy | 1.3.6.1.4.1.412.2.4.55.1.19 | ||
| The accuracy for the reading from this electrical current probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.55.1.20 | ||
| Index into the FRU table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.55.1.21 | ||
| Index into the Operational State table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfElectricalCurrentProbeEvSys | 1.3.6.1.4.1.412.2.4.55.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfElectricalCurrentProbeEvSub | 1.3.6.1.4.1.412.2.4.55.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfDiagnosticFunctionGroupTable | 1.3.6.1.4.1.412.2.4.56 | ||
| This group defines the diagnostic functions that are provided by this component for analyzing potential failures within the component. A diagnostic function could be an actual test run against the component, the results of a self-test of the component, an analysis of failure information captured during a failure of the component, or an analysis of the current state of the component. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDiagnosticFunctionGroup | |||
| dmtfDiagnosticFunctionGroupEntry | 1.3.6.1.4.1.412.2.4.56.1 | ||
| This group defines the diagnostic functions that are provided by this component for analyzing potential failures within the component. A diagnostic function could be an actual test run against the component, the results of a self-test of the component, an analysis of failure information captured during a failure of the component, or an analysis of the current state of the component. | |||
| OBJECT-TYPE | |||
| SdmtfDiagnosticFunctionGroup | |||
| dmtfDiagnosticFunctionGroupState | 1.3.6.1.4.1.412.2.4.56.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| diagnosticFunctionTableIndex | 1.3.6.1.4.1.412.2.4.56.1.1 | ||
| A unique identifier for this specific diagnostic function. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| diagnosticFunctionName | 1.3.6.1.4.1.412.2.4.56.1.2 | ||
| A specific descriptive name of the diagnostic function, includin version information, if relevant. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| diagnosticFunctionDescription | 1.3.6.1.4.1.412.2.4.56.1.3 | ||
| A description of what this diagnostic function does. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| exclusiveAccessRequired | 1.3.6.1.4.1.412.2.4.56.1.4 | ||
| Indicates whether this diagnostic function requires exclusive access to the device or component, implying that the user or management applicat on must take some action within the operating system to ensure that the device or component cannot be used by any other function. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| prerequisiteConditions | 1.3.6.1.4.1.412.2.4.56.1.5 | ||
| Indicates what conditions must be met before this diagnostic function can be run. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), noPrerequisites(3), wrapPlugInstalled(4), noMediaInstalled(5), scratchMediaInstalled(6), testMediaInstalled(7), systemReferenceDisketteInstalled(8) | ||
| prerequisiteDiagnosticFunction | 1.3.6.1.4.1.412.2.4.56.1.6 | ||
| If non-0, this specifies the ID of another diagnostic function that must be run immediately prior to this one. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfDiagnosticRequestGroupTable | 1.3.6.1.4.1.412.2.4.57 | ||
| This group defines the attributes which a management application uses to request an actual diagnostic analysis. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDiagnosticRequestGroup | |||
| dmtfDiagnosticRequestGroupEntry | 1.3.6.1.4.1.412.2.4.57.1 | ||
| This group defines the attributes which a management application uses to request an actual diagnostic analysis. | |||
| OBJECT-TYPE | |||
| SdmtfDiagnosticRequestGroup | |||
| diagnosticFunctionReserveKey | 1.3.6.1.4.1.412.2.4.57.1.1 | ||
| Indicates whether the interface to this component's diagnostic functions is reserved. A zero value returned on a get indicates that a reserve is already in effect. A non-zero value indicates that no reserve was in effect, and the returned value may be used as a reserve key. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| diagnosticFunctionRequest | 1.3.6.1.4.1.412.2.4.57.1.2 | ||
| The ID of the specific diagnostic function which is being requested. If the interface is reserved, a set request to this attribute should also set the Diagnostic Function Reserve Key with the reserve key value. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| diagnosticFunctionResult | 1.3.6.1.4.1.412.2.4.57.1.3 | ||
| The integer-based result code of the last diagnostic function run. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfDiagnosticResultsGroupTable | 1.3.6.1.4.1.412.2.4.58 | ||
| This group defines the attributes for interpreting diagnostic function result codes. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDiagnosticResultsGroup | |||
| dmtfDiagnosticResultsGroupEntry | 1.3.6.1.4.1.412.2.4.58.1 | ||
| This group defines the attributes for interpreting diagnostic function result codes. | |||
| OBJECT-TYPE | |||
| SdmtfDiagnosticResultsGroup | |||
| dmtfDiagnosticResultsGroupState | 1.3.6.1.4.1.412.2.4.58.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| diagnosticFunctionID | 1.3.6.1.4.1.412.2.4.58.1.1 | ||
| The unique ID for a specific diagnostic function. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| diagnosticFunctionResult | 1.3.6.1.4.1.412.2.4.58.1.2 | ||
| An integer-based result code of the diagnostic function. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| diagnosticFunctionResultDescription | 1.3.6.1.4.1.412.2.4.58.1.3 | ||
| A description of what this result code for this diagnostic function means, including suggested corrective actions, where possible. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| faultIsolatedToThisComponent | 1.3.6.1.4.1.412.2.4.58.1.4 | ||
| An indicator of whether the fault is strictly isolated within the bounds of this component. A False value indicates that the fault might be caused by a failing parent component; for example, a disk test may fail because of a faulty disk controller. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| dmtfDiagnosticResultsFRUCallTable | 1.3.6.1.4.1.412.2.4.59 | ||
| This group defines the possible FRUs (Field Replaceable Units) implied by the diagnostic function results. This table may hold multiple FRU entries for a given diagnostic ID and result. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfDiagnosticResultsFRUCall | |||
| dmtfDiagnosticResultsFRUCallEntry | 1.3.6.1.4.1.412.2.4.59.1 | ||
| This group defines the possible FRUs (Field Replaceable Units) implied by the diagnostic function results. This table may hold multiple FRU entries for a given diagnostic ID and result. | |||
| OBJECT-TYPE | |||
| SdmtfDiagnosticResultsFRUCall | |||
| dmtfDiagnosticResultsFRUCallState | 1.3.6.1.4.1.412.2.4.59.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| diagnosticFunctionID | 1.3.6.1.4.1.412.2.4.59.1.1 | ||
| The unique ID of a specific diagnostic function. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| diagnosticFunctionResult | 1.3.6.1.4.1.412.2.4.59.1.2 | ||
| An integer-based result code of the diagnostic function. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUIndexPointer | 1.3.6.1.4.1.412.2.4.59.1.3 | ||
| The index in the FRU table of the implied failing FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| fRUProbability | 1.3.6.1.4.1.412.2.4.59.1.4 | ||
| The probability, in percent, that this is the failing FRU. A value of 0x80000000 means the probability is unknown; otherwise, this should be a percentage number from 1 to 100. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfOutOfBandRemoteAccessTable | 1.3.6.1.4.1.412.2.4.60 | ||
| This defines the attributes and policy settings of a special hardware facility called Out-of-Band Remote Access, which may be used to gain remote accessto a hardware system when the operating system is not availabl due to power down status, hardware failures, or boot failures. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfOutOfBandRemoteAccess | |||
| dmtfOutOfBandRemoteAccessEntry | 1.3.6.1.4.1.412.2.4.60.1 | ||
| This defines the attributes and policy settings of a special hardware facility called Out-of-Band Remote Access, which may be used to gain remote accessto a hardware system when the operating system is not availabl due to power down status, hardware failures, or boot failures. | |||
| OBJECT-TYPE | |||
| SdmtfOutOfBandRemoteAccess | |||
| outOfBandFunctionManufacturerName | 1.3.6.1.4.1.412.2.4.60.1.1 | ||
| This string attribute provides the name of the manufacturer of the out-of-band access facility in the system. This may be the name of the system manufacturer or the name of the add-in that carries the out-of-band function. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| outOfBandFunctionDescriptionString | 1.3.6.1.4.1.412.2.4.60.1.2 | ||
| This is a user-settable string that contains a description of the out-of-band remote access facility in the system. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| outboundOutOfBandConnectionEnabled | 1.3.6.1.4.1.412.2.4.60.1.3 | ||
| Defines whether the Out-of-Band Remote Access facility is allowed to initiate outbound connections to contact an alert management facility when critical conditions occur. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| inboundOutOfBandConnectionEnabled | 1.3.6.1.4.1.412.2.4.60.1.4 | ||
| Defines whether the Out-of-Band Remote Access facility is allowed to receive incoming connections for the purpose of remote operations or problem management. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1), unknown(2) | ||
| dmtfCachePerformanceTable | 1.3.6.1.4.1.412.2.4.61 | ||
| This is a table of entries for cache performance for all components in the system that implement a cache. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfCachePerformanceTable | |||
| dmtfCachePerformanceEntry | 1.3.6.1.4.1.412.2.4.61.1 | ||
| This is a table of entries for cache performance for all components in the system that implement a cache. | |||
| OBJECT-TYPE | |||
| SdmtfCachePerformanceTable | |||
| dmtfCachePerformanceTableState | 1.3.6.1.4.1.412.2.4.61.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| cacheIndex | 1.3.6.1.4.1.412.2.4.61.1.1 | ||
| Index into the System Cache table | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| millisecondCounter | 1.3.6.1.4.1.412.2.4.61.1.2 | ||
| 32 bit counter that gets incremented every millisecond | |||
| OBJECT-TYPE | |||
| DmiCounter | |||
| cacheAccessCount | 1.3.6.1.4.1.412.2.4.61.1.3 | ||
| 64 bit counter that counts the number of times the cache has been accessed. A value of 0x8000000000000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiCounter64 | |||
| cacheHitCount | 1.3.6.1.4.1.412.2.4.61.1.4 | ||
| 64 bit counter that counts the number of times there was a cache hit. i.e. memory being accessed was in the Cache. A value of 0x800000000 000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiCounter64 | |||
| partialHitCount | 1.3.6.1.4.1.412.2.4.61.1.5 | ||
| Counts the number of times there was a partial cache hit. A value of 0x8000000000000000 denotes 'unknown' or 'unsupported'. | |||
| OBJECT-TYPE | |||
| DmiCounter64 | |||
| hitDataSize | 1.3.6.1.4.1.412.2.4.61.1.6 | ||
| On a partial hit the number of bytes that were available in cache. A value of 0x8000000000000000 denotes 'unknown' or 'unsupported'. | |||
| OBJECT-TYPE | |||
| DmiInteger64 | |||
| validUsage | 1.3.6.1.4.1.412.2.4.61.1.7 | ||
| The amount of cache currently holding valid data, in kilobytes. A value of 0x80000000 denotes 'unknown' or 'unsupported'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dirtyUsage | 1.3.6.1.4.1.412.2.4.61.1.8 | ||
| The amount of cache data, in kilobytes, not yet written to media. A value of 0x80000000 denotes 'unknown' or 'unsupported'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| timeOfLastDetectedFault | 1.3.6.1.4.1.412.2.4.61.1.9 | ||
| The number of seconds that have passed between power on the last detected cache fault or failure. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| lastFaultFailureDetected | 1.3.6.1.4.1.412.2.4.61.1.10 | ||
| The vendor-unique fault code associated with the most recent fault or failure detected with this cache. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfBusUtilizationTable | 1.3.6.1.4.1.412.2.4.62 | ||
| This group defines Bus Utilization. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfBusUtilizationTable | |||
| dmtfBusUtilizationEntry | 1.3.6.1.4.1.412.2.4.62.1 | ||
| This group defines Bus Utilization. | |||
| OBJECT-TYPE | |||
| SdmtfBusUtilizationTable | |||
| dmtfBusUtilizationTableState | 1.3.6.1.4.1.412.2.4.62.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| busIndex | 1.3.6.1.4.1.412.2.4.62.1.1 | ||
| Index that uniquely identifies a bus in the system or component for which utilization is being measured. This is an index into the Bus Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| slotIndex | 1.3.6.1.4.1.412.2.4.62.1.2 | ||
| Index of the slot (real or virtual) in the System Slots group for which bus utilization is being measured. An index of 0 corresponds to the total utilization for the bus i.e. a total for all slots. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| busUtilizationSampleInterval | 1.3.6.1.4.1.412.2.4.62.1.3 | ||
| Length of time in millisecs over which bus utilization is measured. A value of 0x80000000 denotes 'unknown'. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| percentBusUtilization | 1.3.6.1.4.1.412.2.4.62.1.4 | ||
| Percent of the time the specified bus was busy transfering data to or from the slot specified in slot index. A value of 0x80000000 means that the percent bus utilization is unknown. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| averageBusThroughputRate | 1.3.6.1.4.1.412.2.4.62.1.5 | ||
| Average mega bytes transferred by the bus per second during the sampling interval. A value of 0x80000000 means that the average bus throughp t rate is unknown. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfPhysicalContainerGlobalTable | 1.3.6.1.4.1.412.2.4.63 | ||
| This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPhysicalContainerGlobalTable | |||
| dmtfPhysicalContainerGlobalTraps | 1.3.6.1.4.1.412.2.4.63.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfPhysicalContainerSecuritySettingsChange | 1.3.6.1.4.1.412.2.4.63.0.1 | ||
| The security settings for the system chassis or physical container in the system have been modified. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalContainerGlobalEvSys | |||
| dmtfPhysicalContainerGlobalEvSub | |||
| dmtfPhysicalContainerPowerSupplyStatusChange | 1.3.6.1.4.1.412.2.4.63.0.2 | ||
| The power supply for an associated system chassis or physical container has changed status. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalContainerGlobalEvSys | |||
| dmtfPhysicalContainerGlobalEvSub | |||
| dmtfPhysicalContainerCoolingDeviceStatusChange | 1.3.6.1.4.1.412.2.4.63.0.3 | ||
| The cooling device for an associated system chassis or physical container has changed status. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalContainerGlobalEvSys | |||
| dmtfPhysicalContainerGlobalEvSub | |||
| dmtfPhysicalContainerPhysicalDeviceStatusChange | 1.3.6.1.4.1.412.2.4.63.0.4 | ||
| physicalDeviceStatusChange | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalContainerGlobalEvSys | |||
| dmtfPhysicalContainerGlobalEvSub | |||
| dmtfPhysicalContainerLogicalDeviceStatusChange | 1.3.6.1.4.1.412.2.4.63.0.5 | ||
| logicalDeviceStatusChange | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalContainerGlobalEvSys | |||
| dmtfPhysicalContainerGlobalEvSub | |||
| dmtfPhysicalContainerSecurityBreach | 1.3.6.1.4.1.412.2.4.63.0.6 | ||
| The system chassis has been opened has been opened without poper authorization. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalContainerGlobalEvSys | |||
| dmtfPhysicalContainerGlobalEvSub | |||
| dmtfPhysicalContainerConfigurationError | 1.3.6.1.4.1.412.2.4.63.0.7 | ||
| A chassis or other physical container on the system is not properly configured. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfPhysicalContainerGlobalEvSys | |||
| dmtfPhysicalContainerGlobalEvSub | |||
| dmtfPhysicalContainerGlobalEntry | 1.3.6.1.4.1.412.2.4.63.1 | ||
| This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis, etc.) included within the component whose structure is being described | |||
| OBJECT-TYPE | |||
| SdmtfPhysicalContainerGlobalTable | |||
| dmtfPhysicalContainerGlobalTableState | 1.3.6.1.4.1.412.2.4.63.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| containerOrChassisType | 1.3.6.1.4.1.412.2.4.63.1.1 | ||
| The type of container or chassis. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), desktop(3), lowProfileDesktop(4), pizzaBox(5), miniTower(6), tower(7), portable(8), lapTop(9), notebook(10), handHeld(11), dockingStation(12), allInOne(13), subNotebook(14), spaceSaving(15), lunchBox(16), mainSystemChassis(17), expansionChassis(18), subChassis(19), busExpansionChassis(20), peripheralChassis(21), rAIDChassis(22), rackMountChassis(23), sealedCasePC(24) | ||
| assetTag | 1.3.6.1.4.1.412.2.4.63.1.2 | ||
| The Container asset tag string. This asset tag string is writeable by the system administrator. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| chassisLockPresent | 1.3.6.1.4.1.412.2.4.63.1.3 | ||
| If true, a chassis lock is present on the Container. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| bootupState | 1.3.6.1.4.1.412.2.4.63.1.4 | ||
| The current state of this system when it booted. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable-1(6) | ||
| powerState | 1.3.6.1.4.1.412.2.4.63.1.5 | ||
| The current state of the power supply or battery(s) for this system. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6) | ||
| thermalState | 1.3.6.1.4.1.412.2.4.63.1.6 | ||
| The current thermal state of this Container. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), oK(3), warning(4), critical(5), nonRecoverable(6) | ||
| fRUGroupIndex | 1.3.6.1.4.1.412.2.4.63.1.7 | ||
| If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a FRU. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| operationalGroupIndex | 1.3.6.1.4.1.412.2.4.63.1.8 | ||
| The index into the Operational State table for this device if applicable. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| containerIndex | 1.3.6.1.4.1.412.2.4.63.1.9 | ||
| A unique index for the Physical Container in Physical Container Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| containerName | 1.3.6.1.4.1.412.2.4.63.1.10 | ||
| This is any 64-octet long name that the user or system administr tor wishes to give this specific physical container. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| containerLocation | 1.3.6.1.4.1.412.2.4.63.1.11 | ||
| This attribute is a string name for the location of the containe . This attribute is Read-Write and may be set to any appropriate value by the user. The string may be 128 octets long. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| containerSecurityStatus | 1.3.6.1.4.1.412.2.4.63.1.12 | ||
| This attribute describes whether the Container is physically secure or not. This includes the state of the door lock, or the boot devices or the keyboard or mouse. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), noSecurityBreachDetected(3), containerSecurityBreachAttempted(4), containerSecurityBreached(5) | ||
| dmtfPhysicalContainerGlobalEvSys | 1.3.6.1.4.1.412.2.4.63.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfPhysicalContainerGlobalEvSub | 1.3.6.1.4.1.412.2.4.63.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfBusGlobalTable | 1.3.6.1.4.1.412.2.4.64 | ||
| This global table has one entry for each of the Buses in this Component. The unique ID provided to each bus is the index into this table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfBusGlobalTable | |||
| dmtfBusGlobalEntry | 1.3.6.1.4.1.412.2.4.64.1 | ||
| This global table has one entry for each of the Buses in this Component. The unique ID provided to each bus is the index into this table. | |||
| OBJECT-TYPE | |||
| SdmtfBusGlobalTable | |||
| dmtfBusGlobalTableState | 1.3.6.1.4.1.412.2.4.64.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| busID | 1.3.6.1.4.1.412.2.4.64.1.1 | ||
| Unique index provided to each Bus in this Component and used as a key into the Bus Global Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| busType | 1.3.6.1.4.1.412.2.4.64.1.2 | ||
| The type of the bus being described by this entry in the Bus Global Table. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), eISA(3), iSA(4), pCI(5), sCSI(6), iDE(7), diagnostic(8), i2C(9), power(10), pCCard(11), cardbus(12), x1394(13), uSB(14) | ||
| dmtfPhysicalExpansionSiteTable | 1.3.6.1.4.1.412.2.4.65 | ||
| This global table describes all of the expansion sites in this expandable component in the system. The unique index of each expansion site is the key into this table. Card/Bus slots, disk bays, hot-plug power supply bays, etc., are all examples of expansion sites. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPhysicalExpansionSiteTable | |||
| dmtfPhysicalExpansionSiteEntry | 1.3.6.1.4.1.412.2.4.65.1 | ||
| This global table describes all of the expansion sites in this expandable component in the system. The unique index of each expansion site is the key into this table. Card/Bus slots, disk bays, hot-plug power supply bays, etc., are all examples of expansion sites. | |||
| OBJECT-TYPE | |||
| SdmtfPhysicalExpansionSiteTable | |||
| dmtfPhysicalExpansionSiteTableState | 1.3.6.1.4.1.412.2.4.65.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| expansionSiteIndex | 1.3.6.1.4.1.412.2.4.65.1.1 | ||
| The unique integer index into Physical Expansion Sites table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| expansionSiteType | 1.3.6.1.4.1.412.2.4.65.1.2 | ||
| This attribute describes the type of expansion site that is being defined by this entry in the Physical Expansion Sites Table. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), busSlot(3), driveBay(4), powerUnitBay(5), subchassisSlot(6), pCMCIASlot(7), deviceBay(8) | ||
| virtualExpansionSite | 1.3.6.1.4.1.412.2.4.65.1.3 | ||
| This attribute indicates whether this is a 'virtual' expansion site or not. A virtual expansion site is one that is permanently occupied because of the level of integration of an expandable component. An example of a virtual expansion site is an I/O bus load taken up by a LAN controller that is integrated onto a motherboard. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| expansionSiteName | 1.3.6.1.4.1.412.2.4.65.1.4 | ||
| Name chosen by the vendor of this component to name this particular expansion site within this component, e.g. 'Slot 6', 'DriveBay 1'. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| expansionSiteDescription | 1.3.6.1.4.1.412.2.4.65.1.5 | ||
| This is a vendor-settable string that describes the expandable site in whatever way is desired. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| expansionSiteCurrentlyOccupied | 1.3.6.1.4.1.412.2.4.65.1.6 | ||
| A boolean whose value indicates whether this Expansion Site is currently occupied or not. | |||
| OBJECT-TYPE | |||
| INTEGER | false(0), true(1) | ||
| expansionSiteInsertionProperties | 1.3.6.1.4.1.412.2.4.65.1.7 | ||
| This attribute indicates the insertion properties of this expansion site (Hot, Warm, Cold) which describes if the site must be powered OFF before a connection may be made. An example of a hot insertion expansion site would be a hot-plug power supply bay while a bus slot like PCI is a cold insertion expansion site. Warm insertion allows power to be ON but no activity present. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), hot(3), warm(4), cold(5) | ||
| expansionSitePropertiesTableReference | 1.3.6.1.4.1.412.2.4.65.1.8 | ||
| Reference to Expansion Site Properties Table | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfPowerUnitGlobalTable | 1.3.6.1.4.1.412.2.4.66 | ||
| This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is composed of potentially more than one Power Supply in a redundant configuration. Individual power supplies are described in the 'Power Supply' standard group. In that group, each individual power supply entry will point to a Power Unit in this table by using the index of the row in this table that describes the Power Unit. If a Power Unit is redunda | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfPowerUnitGlobalTable | |||
| dmtfPowerUnitGlobalEntry | 1.3.6.1.4.1.412.2.4.66.1 | ||
| This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is composed of potentially more than one Power Supply in a redundant configuration. Individual power supplies are described in the 'Power Supply' standard group. In that group, each individual power supply entry will point to a Power Unit in this table by using the index of the row in this table that describes the Power Unit. If a Power Unit is redunda | |||
| OBJECT-TYPE | |||
| SdmtfPowerUnitGlobalTable | |||
| dmtfPowerUnitGlobalTableState | 1.3.6.1.4.1.412.2.4.66.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| powerUnitIndex | 1.3.6.1.4.1.412.2.4.66.1.1 | ||
| The unique index given to each Power Unit being described by this table. This unique index is the key into this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| powerUnitRedundancyStatus | 1.3.6.1.4.1.412.2.4.66.1.2 | ||
| Gives the redundancy status of the Power Unit. 'Fully Redundant means that all of the configured redundancy is still available; 'Degraded Redundancy' means that some failures have been experienced but some reduced amount of redundancy is still available; 'Redundancy Lost' means that a sufficie t number of failures have been experienced that no redundancy is available and the next failure experienced within the Power Unit will cause overall Power Unit failure. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), notApplicableUnitNotRedundant(3), offline(4), fullyRedundant(5), degradedRedundancy(6), redundancyLost(7) | ||
| dmtfCoolingUnitGlobalTable | 1.3.6.1.4.1.412.2.4.67 | ||
| This global table describes all of the Cooling Units in this system component. The unique index of each Cooling Unit is a key into this table. A Cooling Unit is composed of potentially more than one Cooling Device in a redundant configuration. Cooling devices are described by the 'Cooling Device' standard group. Each cooling device described by a row in the Cooling Device standard group will point to a corresponding Cooling Unit in this table by using the row index of the row that describes the Coolin | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfCoolingUnitGlobalTable | |||
| dmtfCoolingUnitGlobalEntry | 1.3.6.1.4.1.412.2.4.67.1 | ||
| This global table describes all of the Cooling Units in this system component. The unique index of each Cooling Unit is a key into this table. A Cooling Unit is composed of potentially more than one Cooling Device in a redundant configuration. Cooling devices are described by the 'Cooling Device' standard group. Each cooling device described by a row in the Cooling Device standard group will point to a corresponding Cooling Unit in this table by using the row index of the row that describes the Coolin | |||
| OBJECT-TYPE | |||
| SdmtfCoolingUnitGlobalTable | |||
| dmtfCoolingUnitGlobalTableState | 1.3.6.1.4.1.412.2.4.67.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| coolingUnitIndex | 1.3.6.1.4.1.412.2.4.67.1.1 | ||
| The unique index given to each Cooling Unit being described by this table. This unique index is the key into this table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| coolingUnitStatus | 1.3.6.1.4.1.412.2.4.67.1.2 | ||
| Gives the redundancy status of the Cooling Unit. 'Fully Redundan ' means that all of the configured redundancy is still available; 'Degraded Redundancy' means that some failures have been experienced but some reduced amount of redundancy is still available; 'Redundancy Lost' means that a sufficie t number of failures have been experienced that no redundancy is available and the next failure experienced within the Cooling Unit will cause overall Cooling Unit failure. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), notApplicableUnitNotRedundant(3), offline(4), fullyRedundant(5), degradedRedundancy(6), redundancyLost(7) | ||
| dmtfStructureDependencyTable | 1.3.6.1.4.1.412.2.4.68 | ||
| This group describes a table whose entries identify the structur l dependencies of elements on other elements in the system. The attributes in this group form a row of the table and the row has the following structure: . The is the index of the row in the table. The can point either to a element in the current Component or to an external Component. The | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfStructureDependencyTable | |||
| dmtfStructureDependencyTraps | 1.3.6.1.4.1.412.2.4.68.0 | ||
| OBJECT IDENTIFIER | |||
| dmtfStructureDependencyPowerSupplyStatusChange | 1.3.6.1.4.1.412.2.4.68.0.1 | ||
| A power supply in the system has changed status. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencyCoolingDeviceStatusChange | 1.3.6.1.4.1.412.2.4.68.0.2 | ||
| A cooling device (e.g., fan) in the system has changed status. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencyPhysicalDeviceStatusChange | 1.3.6.1.4.1.412.2.4.68.0.3 | ||
| A physical device in the system has changed status. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencyLogicalDeviceStatusChange | 1.3.6.1.4.1.412.2.4.68.0.4 | ||
| A logical device in the system has changed status. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencySystemUp | 1.3.6.1.4.1.412.2.4.68.0.5 | ||
| An element of the system is up and running | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencyBatteryStatusChange | 1.3.6.1.4.1.412.2.4.68.0.6 | ||
| A battery powering the system has changed status. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencyContainerSecurityBreach | 1.3.6.1.4.1.412.2.4.68.0.7 | ||
| The system chassis has been opened has been opened without poper authorization. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencyInitializationFailure | 1.3.6.1.4.1.412.2.4.68.0.8 | ||
| An element of the system failed to initialize properly during system startup. | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencyConfigurationError | 1.3.6.1.4.1.412.2.4.68.0.9 | ||
| An element of the system is not properly configured | |||
| NOTIFICATION-TYPE | |||
| dmiEventDateTime | |||
| dmiCompId | |||
| dmiEventSeverity | |||
| dmiEventStateKey | |||
| dmiEventAssociatedGroup | |||
| dmtfStructureDependencyEvSys | |||
| dmtfStructureDependencyEvSub | |||
| dmtfStructureDependencyEntry | 1.3.6.1.4.1.412.2.4.68.1 | ||
| This group describes a table whose entries identify the structur l dependencies of elements on other elements in the system. The attributes in this group form a row of the table and the row has the following structure: . The is the index of the row in the table. The can point either to a element in the current Component or to an external Component. The | |||
| OBJECT-TYPE | |||
| SdmtfStructureDependencyTable | |||
| dmtfStructureDependencyTableState | 1.3.6.1.4.1.412.2.4.68.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| dependencyIndex | 1.3.6.1.4.1.412.2.4.68.1.1 | ||
| This is a unique index into the Structure Dependency Table. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| supportingElementGroupID | 1.3.6.1.4.1.412.2.4.68.1.2 | ||
| This attribute holds the Group ID of the structure table (e.g. Physical Container Global Table, etc.) or other table group within the current expandable component that describes the supporting element. A supporting element Component ID is not required because the supporting element is expected to reside in the current Component that is implementing this attribute. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| supportingElementRowKey | 1.3.6.1.4.1.412.2.4.68.1.3 | ||
| This attribute holds the Row Key to the structure table or other table group within the current expandable component that describes the supporting element. The Row Key is a KeyList composed of Integers (or Enums) ONLY. It is currently represented as a string whose content is a comma-separated list of Integers in ASCII form (i.e. the individual keys), without any intervening spaces. If the supporting element is not described by a table group then this attribute must be set to a null string. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dependencyType | 1.3.6.1.4.1.412.2.4.68.1.4 | ||
| This attribute describes the type of dependency represented by this entry in the Structure Dependency Table, e.g. 'contains', or'provides power to', etc. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), contains(3), providesPowerTo(4), providesCoolingTo(5), connectsTo(6) | ||
| dependentElementComponentID | 1.3.6.1.4.1.412.2.4.68.1.5 | ||
| This is the Component ID of the dependent element in the dependency relationship which is of the form' '. If this attribute has a zero value then the current component is being referenced. If it is non-zero then an external component is being pointed to. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dependentElementGroupID | 1.3.6.1.4.1.412.2.4.68.1.6 | ||
| This attribute contains the Group ID of the attribute group that describes the dependent element within the component identified by the attribute Dependent Element Component ID. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dependentElementRowKey | 1.3.6.1.4.1.412.2.4.68.1.7 | ||
| This attribute holds the RowKey selecting the particular row in the(table) group uniquely identified by the contents of the attribute's Dependent Element Group ID and Dependent Element Component ID. The Row Key is a KeyList composed of Integers (or Enums) ONLY. It is currently represented as a string whose content is a comma-separated list of Integers in ASCII form (i.e. the individual keys), without any intervening spaces. If the dependen element is not described by a table group then this attribute m | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfStructureDependencyEvSys | 1.3.6.1.4.1.412.2.4.68.6 | ||
| The major functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfStructureDependencyEvSub | 1.3.6.1.4.1.412.2.4.68.7 | ||
| The minor functional aspect of the product causing the fault. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1) | ||
| dmtfBusCardLocationTable | 1.3.6.1.4.1.412.2.4.69 | ||
| This group specifies a logical location on an I/O expansion bus. This group is required. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfBusCardLocation | |||
| dmtfBusCardLocationEntry | 1.3.6.1.4.1.412.2.4.69.1 | ||
| This group specifies a logical location on an I/O expansion bus. This group is required. | |||
| OBJECT-TYPE | |||
| SdmtfBusCardLocation | |||
| busType | 1.3.6.1.4.1.412.2.4.69.1.7 | ||
| Type of expansion bus. | |||
| OBJECT-TYPE | |||
| INTEGER | other(1), unknown(2), eISA(3), pCI(4), iSA(5), mCA(6), sCSI(7), iDE(8), uSB(9), x1394(10), i2C(11), pCCard(12), cardbus(13) | ||
| eISAIOAddress | 1.3.6.1.4.1.412.2.4.69.1.8 | ||
| EISA I/O address which identifies a specific EISA slot. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| busNumber | 1.3.6.1.4.1.412.2.4.69.1.9 | ||
| Number of the PCI or MCA bus containing a bus card. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| busLocation | 1.3.6.1.4.1.412.2.4.69.1.10 | ||
| Configuration address specifying the location of a bus card on a specific PCI or MCA bus. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| iSASlot | 1.3.6.1.4.1.412.2.4.69.1.11 | ||
| Slot number of an ISA card inserted into an EISA or ISA bus. This indicates a physical slot number. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfSystemContactInformationTable | 1.3.6.1.4.1.412.2.4.70 | ||
| This tabular group contains records, each of which contains contact information for one of the administrators of this machine | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemContactInformation | |||
| dmtfSystemContactInformationEntry | 1.3.6.1.4.1.412.2.4.70.1 | ||
| This tabular group contains records, each of which contains contact information for one of the administrators of this machine | |||
| OBJECT-TYPE | |||
| SdmtfSystemContactInformation | |||
| dmtfSystemContactInformationState | 1.3.6.1.4.1.412.2.4.70.1.0 | ||
| OBJECT-TYPE | |||
| INTEGER | active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) | ||
| contactIndex | 1.3.6.1.4.1.412.2.4.70.1.1 | ||
| Index into table of administrator contacts for this system | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| contactName | 1.3.6.1.4.1.412.2.4.70.1.2 | ||
| Name of administrator contact for this machine | |||
| OBJECT-TYPE | |||
| DmiString | |||
| contactType | 1.3.6.1.4.1.412.2.4.70.1.3 | ||
| The type of mechanism by which this administrator can be contacted. | |||
| OBJECT-TYPE | |||
| INTEGER | other(0), unknown(1), telephone(2), cellularTelephone(3), pager(4), alphamericPager(5), beeper(6), fAX(7), eMail(8), voiceMail(9), audibleAlarm(10), visibleAlarm(11), wWWURL(12) | ||
| contactInformation | 1.3.6.1.4.1.412.2.4.70.1.4 | ||
| Addressing or other information that will be used to establish contact e.g. if Contact Type is Telephone then Contact Information would be the telephone number. | |||
| OBJECT-TYPE | |||
| DmiString | |||
| dmtfSystemMemorySettingsTable | 1.3.6.1.4.1.412.2.4.71 | ||
| This group defines the current memory settings for system memory and any add-on memory installed in the operating system. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SdmtfSystemMemorySettings | |||
| dmtfSystemMemorySettingsEntry | 1.3.6.1.4.1.412.2.4.71.1 | ||
| This group defines the current memory settings for system memory and any add-on memory installed in the operating system. | |||
| OBJECT-TYPE | |||
| SdmtfSystemMemorySettings | |||
| totalPhysicalMemory | 1.3.6.1.4.1.412.2.4.71.1.1 | ||
| The total size of physical system memory in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| freePhysicalMemory | 1.3.6.1.4.1.412.2.4.71.1.2 | ||
| The amount of physical memory free in kilobytes. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| totalSizeOfPagingFiles | 1.3.6.1.4.1.412.2.4.71.1.3 | ||
| The total number of kilobytes that can be stored in the system paging files. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| totalFreeSpaceInPagingFiles | 1.3.6.1.4.1.412.2.4.71.1.4 | ||
| The number of kilobytes available in the system paging files. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| totalVirtualMemory | 1.3.6.1.4.1.412.2.4.71.1.5 | ||
| Total kilobytes in the virtual address space of the operating system. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| freeVirtualMemory | 1.3.6.1.4.1.412.2.4.71.1.6 | ||
| Free kilobytes in the virtual address space of the operating system. | |||
| OBJECT-TYPE | |||
| DmiInteger | |||
| dmtfDynOids | 1.3.6.1.4.1.412.3 | ||
| OBJECT IDENTIFIER | |||
| DmiCounter | |||
| Counter32 | |||
| DmiCounter64 | |||
| Counter64 | |||
| DmiGauge | |||
| Gauge32 | |||
| DmiInteger | |||
| Integer32 | |||
| DmiOctetstring | |||
| OCTET STRING | |||
| DmiCompId | |||
| INTEGER | |||
| DmiGroupId | |||
| INTEGER | |||
| SdmtfBIOSCharacteristic | |||
| SEQUENCE | |||
| INTEGER as dmtfBIOSCharacteristicState | |||
| DmiInteger as bIOSCharacteristicIndex | |||
| DmiInteger as bIOSNumber | |||
| DmiInteger as bIOSCharacteristic | |||
| DmiString as bIOSCharacteristicDescription | |||
| SdmtfBusCardLocation | |||
| SEQUENCE | |||
| DmiInteger as busType | |||
| DmiInteger as eISAIOAddress | |||
| DmiInteger as busNumber | |||
| DmiInteger as busLocation | |||
| DmiInteger as iSASlot | |||
| SdmtfBusGlobalTable | |||
| SEQUENCE | |||
| INTEGER as dmtfBusGlobalTableState | |||
| DmiInteger as busID | |||
| DmiInteger as busType | |||
| SdmtfBusUtilizationTable | |||
| SEQUENCE | |||
| INTEGER as dmtfBusUtilizationTableState | |||
| DmiInteger as busIndex | |||
| DmiInteger as slotIndex | |||
| DmiInteger as busUtilizationSampleInterval | |||
| DmiInteger as percentBusUtilization | |||
| DmiInteger as averageBusThroughputRate | |||
| SdmtfCachePerformanceTable | |||
| SEQUENCE | |||
| INTEGER as dmtfCachePerformanceTableState | |||
| DmiInteger as cacheIndex | |||
| DmiCounter as millisecondCounter | |||
| DmiCounter64 as cacheAccessCount | |||
| DmiCounter64 as cacheHitCount | |||
| DmiCounter64 as partialHitCount | |||
| DmiInteger64 as hitDataSize | |||
| DmiInteger as validUsage | |||
| DmiInteger as dirtyUsage | |||
| DmiInteger as timeOfLastDetectedFault | |||
| DmiInteger as lastFaultFailureDetected | |||
| SdmtfCoolingDevice | |||
| SEQUENCE | |||
| INTEGER as dmtfCoolingDeviceState | |||
| DmiInteger as coolingDeviceTableIndex | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as coolingUnitIndex | |||
| DmiInteger as coolingDeviceType | |||
| DmiInteger as temperatureProbeIndex | |||
| SdmtfCoolingUnitGlobalTable | |||
| SEQUENCE | |||
| INTEGER as dmtfCoolingUnitGlobalTableState | |||
| DmiInteger as coolingUnitIndex | |||
| DmiInteger as coolingUnitStatus | |||
| SdmtfDMA | |||
| SEQUENCE | |||
| INTEGER as dmtfDMAState | |||
| DmiInteger as dMANumber | |||
| DmiInteger as dMAChannelAvailability | |||
| DmiInteger as dMABurstMode | |||
| DmiString as dMADescription | |||
| SdmtfDiagnosticFunctionGroup | |||
| SEQUENCE | |||
| INTEGER as dmtfDiagnosticFunctionGroupState | |||
| DmiInteger as diagnosticFunctionTableIndex | |||
| DmiString as diagnosticFunctionName | |||
| DmiString as diagnosticFunctionDescription | |||
| DmiInteger as exclusiveAccessRequired | |||
| DmiInteger as prerequisiteConditions | |||
| DmiInteger as prerequisiteDiagnosticFunction | |||
| SdmtfDiagnosticRequestGroup | |||
| SEQUENCE | |||
| DmiInteger as diagnosticFunctionReserveKey | |||
| DmiInteger as diagnosticFunctionRequest | |||
| DmiInteger as diagnosticFunctionResult | |||
| SdmtfDiagnosticResultsFRUCall | |||
| SEQUENCE | |||
| INTEGER as dmtfDiagnosticResultsFRUCallState | |||
| DmiInteger as diagnosticFunctionID | |||
| DmiInteger as diagnosticFunctionResult | |||
| DmiInteger as fRUIndexPointer | |||
| DmiInteger as fRUProbability | |||
| SdmtfDiagnosticResultsGroup | |||
| SEQUENCE | |||
| INTEGER as dmtfDiagnosticResultsGroupState | |||
| DmiInteger as diagnosticFunctionID | |||
| DmiInteger as diagnosticFunctionResult | |||
| DmiString as diagnosticFunctionResultDescription | |||
| DmiInteger as faultIsolatedToThisComponent | |||
| SdmtfDiskController | |||
| SEQUENCE | |||
| INTEGER as dmtfDiskControllerState | |||
| DmiInteger as diskControllerIndex | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as systemSlotIndex | |||
| DmiString as diskControllerIdentification | |||
| DmiString as controllerSoftwareRevisionLevel | |||
| DmiInteger as controllerChannelCount | |||
| DmiInteger as controllerMaximumDevices | |||
| SdmtfDisksMappingTable | |||
| SEQUENCE | |||
| INTEGER as dmtfDisksMappingTableState | |||
| DmiInteger as storageType | |||
| DmiInteger as diskIndex | |||
| DmiInteger as partitionIndex | |||
| SdmtfDisks | |||
| SEQUENCE | |||
| INTEGER as dmtfDisksState | |||
| DmiInteger as storageType | |||
| DmiInteger as diskIndex | |||
| DmiInteger as storageInterfaceType | |||
| DmiString as interfaceDescription | |||
| DmiInteger as mediaLoaded | |||
| DmiInteger as removableDrive | |||
| DmiInteger as removableMedia | |||
| DmiInteger as deviceID | |||
| DmiInteger as logicalUnitNumber | |||
| DmiInteger as numberOfPhysicalCylinders | |||
| DmiInteger as numberOfPhysicalSectorsPerTrack | |||
| DmiInteger as numberOfPhysicalHeads | |||
| DmiInteger as physicalCylinderForWritePrecompensation | |||
| DmiInteger as physicalCylinderForLandingZone | |||
| DmiInteger as sectorSize | |||
| DmiInteger as totalPhysicalSize | |||
| DmiInteger as numberOfCurrentBadBlocksOrSectors | |||
| DmiInteger as partitions | |||
| DmiInteger as physicalLocation | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as securitySettings | |||
| SdmtfElectricalCurrentProbe | |||
| SEQUENCE | |||
| INTEGER as dmtfElectricalCurrentProbeState | |||
| DmiInteger as electricalCurrentProbeTableIndex | |||
| DmiInteger as electricalCurrentProbeLocation | |||
| DmiString as electricalCurrentProbeDescription | |||
| DmiInteger as electricalCurrentStatus | |||
| DmiInteger as electricalCurrentProbeReading | |||
| DmiInteger as monitoredElectricalCurrentNominalReading | |||
| DmiInteger as monitoredElectricalCurrentNormalMaximum | |||
| DmiInteger as monitoredElectricalCurrentNormalMinimum | |||
| DmiInteger as electricalCurrentProbeMaximum | |||
| DmiInteger as electricalCurrentProbeMinimum | |||
| DmiInteger as electricalCurrentReadingLowerThresholdNonCritical | |||
| DmiInteger as electricalCurrentReadingUpperThresholdNonCritical | |||
| DmiInteger as electricalCurrentReadingLowerThresholdCritical | |||
| DmiInteger as currentReadingUpperThresholdCritical | |||
| DmiInteger as electricalCurrentReadingLowerThresholdNonRecoverab | |||
| DmiInteger as electricalCurrentReadingUpperThresholdNonRecoverab | |||
| DmiInteger as electricalCurrentProbeResolution | |||
| DmiInteger as electricalCurrentProbeTolerance | |||
| DmiInteger as electricalCurrentProbeAccuracy | |||
| DmiInteger as fRUGroupIndex-1 | |||
| DmiInteger as operationalGroupIndex-1 | |||
| SdmtfFRU | |||
| SEQUENCE | |||
| INTEGER as dmtfFRUState | |||
| DmiInteger as fRUIndex | |||
| DmiInteger as deviceGroupIndex | |||
| DmiString as description | |||
| DmiString as manufacturer | |||
| DmiString as model | |||
| DmiString as partNumber | |||
| DmiString as fRUSerialNumber | |||
| DmiString as revisionLevel | |||
| DmiDate as warrantyStartDate | |||
| DmiInteger as warrantyDuration | |||
| DmiString as supportPhoneNumber | |||
| SdmtfGeneralInformation | |||
| SEQUENCE | |||
| DmiString as systemName | |||
| DmiString as systemLocation | |||
| DmiString as systemPrimaryUserName | |||
| DmiString as systemPrimaryUserPhone | |||
| DmiDate as systemBootupTime | |||
| DmiDate as systemDateTime | |||
| SdmtfIRQ | |||
| SEQUENCE | |||
| INTEGER as dmtfIRQState | |||
| DmiInteger as iRQNumber | |||
| DmiInteger as iRQAvailability | |||
| DmiInteger as iRQTriggerType | |||
| DmiInteger as iRQShareable | |||
| DmiString as iRQDescription | |||
| SdmtfKeyboard | |||
| SEQUENCE | |||
| DmiString as keyboardLayout | |||
| DmiString as keyboardType | |||
| DmiInteger as keyboardConnectorType | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as securitySettings | |||
| SdmtfLogicalDrives | |||
| SEQUENCE | |||
| INTEGER as dmtfLogicalDrivesState | |||
| DmiInteger as logicalDriveIndex | |||
| DmiString as logicalDriveName | |||
| DmiInteger as logicalDriveType | |||
| DmiInteger as logicalDriveSize | |||
| DmiInteger as freeLogicalDriveSize | |||
| DmiString as logicalDrivePath | |||
| SdmtfLogicalMemory | |||
| SEQUENCE | |||
| DmiInteger as baseMemorySize | |||
| DmiInteger as freeBaseMemorySize | |||
| DmiInteger as extendedMemorySize | |||
| DmiInteger as freeExtendedMemorySize | |||
| DmiString as extendedMemoryManagerName | |||
| DmiString as extendedMemoryManagerVersion | |||
| DmiInteger as expandedMemorySize | |||
| DmiInteger as freeExpandedMemorySize | |||
| DmiString as expandedMemoryManagerName | |||
| DmiString as expandedMemoryManagerVersion | |||
| DmiInteger64 as expandedMemoryPageFrameAddress | |||
| DmiInteger as expandedMemoryPageFrameSize | |||
| DmiInteger as expandedMemoryPageSize | |||
| SdmtfMassStoreArrayInfoTable | |||
| SEQUENCE | |||
| INTEGER as dmtfMassStoreArrayInfoTableState | |||
| DmiInteger as logicalDriveIndex | |||
| DmiInteger as driveArrayLevel | |||
| DmiInteger as driveArrayRedundancyStatus | |||
| DmiInteger as driveArrayOperationInProgress | |||
| SdmtfMassStoreLogicalDrivesTable | |||
| SEQUENCE | |||
| INTEGER as dmtfMassStoreLogicalDrivesTableState | |||
| DmiInteger as logicalDriveIndex | |||
| DmiInteger as topOfHierarchy | |||
| DmiInteger as driveArray | |||
| DmiInteger as logicalDriveSizeInKB | |||
| DmiInteger as logicalDriveBlockSizeInBytes | |||
| DmiString as logicalDriveNameString | |||
| SdmtfMassStoreMappingTable | |||
| SEQUENCE | |||
| INTEGER as dmtfMassStoreMappingTableState | |||
| DmiInteger as mappingIndex | |||
| DmiInteger as parentDrive | |||
| DmiInteger as childSegment | |||
| SdmtfMassStoreSegmentTable | |||
| SEQUENCE | |||
| INTEGER as dmtfMassStoreSegmentTableState | |||
| DmiInteger as segmentIndex | |||
| DmiInteger as segmentType | |||
| DmiInteger as segmentStart | |||
| DmiInteger as segmentLength | |||
| DmiInteger as segmentAllocationUnit | |||
| DmiInteger as segmentAllocationState | |||
| DmiInteger as driveKey1 | |||
| DmiInteger as driveKey2 | |||
| SdmtfMemoryArrayMappedAddresses | |||
| SEQUENCE | |||
| INTEGER as dmtfMemoryArrayMappedAddressesState | |||
| DmiInteger as memoryArrayMappedAddressesTableIndex | |||
| DmiInteger as memoryArrayIndex | |||
| DmiInteger as mappedRangeStartingAddress | |||
| DmiInteger as mappedRangeEndingAddress | |||
| DmiInteger as partitionID | |||
| DmiInteger as partitionWidth | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfMemoryDeviceMappedAddresses | |||
| SEQUENCE | |||
| INTEGER as dmtfMemoryDeviceMappedAddressesState | |||
| DmiInteger as memoryDeviceMappedAddressesTableIndex | |||
| DmiInteger as memoryDeviceSetID | |||
| DmiInteger as partition | |||
| DmiInteger as mappedRangeStartingAddress | |||
| DmiInteger as mappedRangeEndingAddress | |||
| DmiInteger as partitionRowPosition | |||
| DmiInteger as interleavePosition | |||
| DmiInteger as dataDepth | |||
| SdmtfMemoryDevice | |||
| SEQUENCE | |||
| INTEGER as dmtfMemoryDeviceState | |||
| DmiInteger as memoryDeviceTableIndex | |||
| DmiInteger as memoryArrayIndex | |||
| DmiString as deviceLocator | |||
| DmiString as bankLocator | |||
| DmiInteger as size | |||
| DmiInteger as formFactor | |||
| DmiInteger as totalWidth | |||
| DmiInteger as dataWidth | |||
| DmiInteger as memoryType | |||
| DmiInteger as typeDetail | |||
| DmiInteger as deviceSet | |||
| DmiInteger as deviceErrorType | |||
| DmiInteger as errorGranularity | |||
| DmiInteger as lastErrorUpdate | |||
| DmiInteger as errorOperation | |||
| DmiInteger as errorDataSize | |||
| DmiOctetstring as errorData | |||
| DmiOctetstring as vendorSyndrome | |||
| DmiInteger as deviceErrorAddress | |||
| DmiInteger as arrayErrorAddress | |||
| DmiInteger as errorResolution | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfMemoryMappedIO | |||
| SEQUENCE | |||
| INTEGER as dmtfMemoryMappedIOState | |||
| DmiInteger64 as memoryMappedIOStartingAddress | |||
| DmiInteger64 as memoryMappedIOEndingAddress | |||
| DmiString as memoryMappedIODescription | |||
| SdmtfMotherboard | |||
| SEQUENCE | |||
| DmiInteger as numberOfExpansionSlots | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfMouse | |||
| SEQUENCE | |||
| DmiInteger as mouseInterface | |||
| DmiInteger as mouseIRQ | |||
| DmiInteger as mouseButtons | |||
| DmiString as mousePortName | |||
| DmiString as mouseDriverName | |||
| DmiString as mouseDriverVersion | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as securitySettings | |||
| SdmtfOperatingSystem | |||
| SEQUENCE | |||
| INTEGER as dmtfOperatingSystemState | |||
| DmiInteger as operatingSystemIndex | |||
| DmiString as operatingSystemName | |||
| DmiString as operatingSystemVersion | |||
| DmiInteger as primaryOperatingSystem | |||
| DmiInteger as operatingSystemBootDeviceStorageType | |||
| DmiInteger as operatingSystemBootDeviceIndex | |||
| DmiInteger as operatingSystemBootPartitionIndex | |||
| DmiString as operatingSystemDescription | |||
| SdmtfOperationalState | |||
| SEQUENCE | |||
| INTEGER as dmtfOperationalStateState | |||
| DmiInteger as operationalStateInstanceIndex | |||
| DmiInteger as deviceGroupIndex | |||
| DmiInteger as operationalStatus | |||
| DmiInteger as usageState | |||
| DmiInteger as availabilityStatus | |||
| DmiInteger as administrativeState | |||
| DmiCounter as fatalErrorCount | |||
| DmiCounter as majorErrorCount | |||
| DmiCounter as warningErrorCount | |||
| DmiInteger as currentErrorStatus | |||
| DmiInteger as devicePredictedFailureStatus | |||
| SdmtfOutOfBandRemoteAccess | |||
| SEQUENCE | |||
| DmiString as outOfBandFunctionManufacturerName | |||
| DmiString as outOfBandFunctionDescriptionString | |||
| DmiInteger as outboundOutOfBandConnectionEnabled | |||
| DmiInteger as inboundOutOfBandConnectionEnabled | |||
| SdmtfParallelPorts | |||
| SEQUENCE | |||
| INTEGER as dmtfParallelPortsState | |||
| DmiInteger as parallelPortIndex | |||
| DmiInteger64 as parallelBaseIOAddress | |||
| DmiInteger as iRQUsed | |||
| DmiString as logicalName | |||
| DmiInteger as connectorType | |||
| DmiInteger as connectorPinout | |||
| DmiInteger as dMASupport | |||
| DmiInteger as parallelPortCapabilities | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as parallelPortSecuritySettings | |||
| SdmtfPartition | |||
| SEQUENCE | |||
| INTEGER as dmtfPartitionState | |||
| DmiInteger as partitionIndex | |||
| DmiString as partitionName | |||
| DmiInteger64 as partitionSize | |||
| DmiInteger64 as freeSpace | |||
| DmiOctetstring as partitionLabel | |||
| DmiInteger as fileSystem | |||
| DmiInteger as compressed | |||
| DmiInteger as encrypted | |||
| DmiInteger as numberOfDisksOccupied | |||
| SdmtfPhysicalContainerGlobalTable | |||
| SEQUENCE | |||
| INTEGER as dmtfPhysicalContainerGlobalTableState | |||
| DmiInteger as containerOrChassisType | |||
| DmiString as assetTag | |||
| DmiInteger as chassisLockPresent | |||
| DmiInteger as bootupState | |||
| DmiInteger as powerState | |||
| DmiInteger as thermalState | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as containerIndex | |||
| DmiString as containerName | |||
| DmiString as containerLocation | |||
| DmiInteger as containerSecurityStatus | |||
| SdmtfPhysicalExpansionSiteTable | |||
| SEQUENCE | |||
| INTEGER as dmtfPhysicalExpansionSiteTableState | |||
| DmiInteger as expansionSiteIndex | |||
| DmiInteger as expansionSiteType | |||
| DmiInteger as virtualExpansionSite | |||
| DmiString as expansionSiteName | |||
| DmiString as expansionSiteDescription | |||
| DmiInteger as expansionSiteCurrentlyOccupied | |||
| DmiInteger as expansionSiteInsertionProperties | |||
| DmiString as expansionSitePropertiesTableReference | |||
| SdmtfPhysicalMemoryArray | |||
| SEQUENCE | |||
| INTEGER as dmtfPhysicalMemoryArrayState | |||
| DmiInteger as memoryArrayTableIndex | |||
| DmiInteger as memoryArrayLocation | |||
| DmiInteger as memoryArrayUse | |||
| DmiInteger as maximumMemoryCapacity | |||
| DmiInteger as numberOfMemoryDeviceSockets | |||
| DmiInteger as numberOfMemoryDeviceSocketsUsed | |||
| DmiInteger as memoryErrorCorrection | |||
| DmiInteger as arrayErrorType | |||
| DmiInteger as lastErrorUpdate | |||
| DmiInteger as errorOperation | |||
| DmiInteger as errorDataSize | |||
| DmiOctetstring as errorData | |||
| DmiOctetstring as vendorSyndrome | |||
| DmiInteger64 as errorAddress | |||
| DmiInteger as errorResolution | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfPhysicalMemory | |||
| SEQUENCE | |||
| INTEGER as dmtfPhysicalMemoryState | |||
| DmiInteger as physicalMemoryIndex | |||
| DmiInteger as physicalMemoryLocation | |||
| DmiInteger64 as memoryStartingAddress | |||
| DmiInteger64 as memoryEndingAddress | |||
| DmiInteger as memoryUsage | |||
| DmiInteger as maximumMemoryCapacity | |||
| DmiInteger as numberOfSIMMSlots | |||
| DmiInteger as numberOfSIMMSlotsUsed | |||
| DmiInteger as memorySpeed | |||
| DmiInteger as memoryErrorCorrection | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as maximumMemoryCapacityFractionalPart | |||
| SdmtfPowerSupplyOutputVoltageCapabilities | |||
| SEQUENCE | |||
| INTEGER as dmtfPowerSupplyOutputVoltageCapabilitiesState | |||
| DmiInteger as outputVoltageCapabilitiesTableIndex | |||
| DmiInteger as powerSupplyIndex | |||
| DmiInteger as powerUnitIndex | |||
| DmiString as outputVoltageCapabilityDescription | |||
| DmiInteger as nominalOutputVoltage | |||
| DmiInteger as outputVoltageLow | |||
| DmiInteger as outputVoltageHigh | |||
| DmiInteger as outputHighFrequency | |||
| DmiInteger as outputLowFrequency | |||
| DmiInteger as recommendedMaximumOutputCurrent | |||
| DmiInteger as maximumOutputCurrent | |||
| DmiInteger as minimumOutputCurrent | |||
| DmiInteger as voltageProbeIndex | |||
| DmiInteger as electricalCurrentProbeIndex | |||
| SdmtfPowerSupply | |||
| SEQUENCE | |||
| INTEGER as dmtfPowerSupplyState | |||
| DmiInteger as powerSupplyIndex | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as powerUnitIndex | |||
| DmiInteger as powerSupplyType | |||
| DmiString as inputVoltageCapabilityDescription | |||
| DmiInteger as range1InputVoltageLow | |||
| DmiInteger as range1InputVoltageHigh | |||
| DmiInteger as range1VoltageProbeIndex | |||
| DmiInteger as range1ElectricalCurrentProbeIndex | |||
| DmiInteger as range2InputVoltageLow | |||
| DmiInteger as range2InputVoltageHigh | |||
| DmiInteger as range2VoltageProbeIndex | |||
| DmiInteger as range2CurrentProbeIndex | |||
| DmiInteger as activeInputVoltageRange | |||
| DmiInteger as inputVoltageRangeSwitching | |||
| DmiInteger as range1InputFrequencyLow | |||
| DmiInteger as range1InputFrequencyHigh | |||
| DmiInteger as range2InputFrequencyLow | |||
| DmiInteger as range2InputFrequencyHigh | |||
| DmiInteger as totalOutputPower | |||
| SdmtfPowerUnitGlobalTable | |||
| SEQUENCE | |||
| INTEGER as dmtfPowerUnitGlobalTableState | |||
| DmiInteger as powerUnitIndex | |||
| DmiInteger as powerUnitRedundancyStatus | |||
| SdmtfProcessor | |||
| SEQUENCE | |||
| INTEGER as dmtfProcessorState | |||
| DmiInteger as processorIndex | |||
| DmiInteger as processorType | |||
| DmiInteger as processorFamily | |||
| DmiString as processorVersionInformation | |||
| DmiInteger as maximumSpeed | |||
| DmiInteger as currentSpeed | |||
| DmiInteger as processorUpgrade | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as level1CacheIndex | |||
| DmiInteger as level2CacheIndex | |||
| DmiInteger as level3CacheIndex | |||
| SdmtfSequentialAccessDevices | |||
| SEQUENCE | |||
| INTEGER as dmtfSequentialAccessDevicesState | |||
| DmiInteger as sequentialAccessIndex | |||
| DmiInteger as maximumSequentialMediaSize | |||
| DmiInteger as currentSequentialMediaSize | |||
| DmiInteger as sequentialMediaPresent | |||
| DmiInteger as sequentialMediaTechnology | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfSerialPorts | |||
| SEQUENCE | |||
| INTEGER as dmtfSerialPortsState | |||
| DmiInteger as serialPortIndex | |||
| DmiInteger64 as serialBaseIOAddress | |||
| DmiInteger as iRQUsed | |||
| DmiString as logicalName | |||
| DmiInteger as connectorType | |||
| DmiInteger as maximumSpeed | |||
| DmiInteger as serialPortCapabilities | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as serialPortSecuritySettings | |||
| SdmtfStructureDependencyTable | |||
| SEQUENCE | |||
| INTEGER as dmtfStructureDependencyTableState | |||
| DmiInteger as dependencyIndex | |||
| DmiInteger as supportingElementGroupID | |||
| DmiString as supportingElementRowKey | |||
| DmiInteger as dependencyType | |||
| DmiInteger as dependentElementComponentID | |||
| DmiInteger as dependentElementGroupID | |||
| DmiString as dependentElementRowKey | |||
| SdmtfSystemBIOS | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemBIOSState | |||
| DmiInteger as bIOSIndex | |||
| DmiString as bIOSManufacturer | |||
| DmiString as bIOSVersion | |||
| DmiInteger as bIOSROMSize | |||
| DmiInteger64 as bIOSStartingAddress | |||
| DmiInteger64 as bIOSEndingAddress | |||
| DmiString as bIOSLoaderVersion | |||
| DmiDate as bIOSReleaseDate | |||
| DmiInteger as primaryBIOS | |||
| SdmtfSystemCache | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemCacheState | |||
| DmiInteger as systemCacheIndex | |||
| DmiInteger as systemCacheLevel | |||
| DmiInteger as systemCacheSpeed | |||
| DmiInteger as systemCacheSize | |||
| DmiInteger as systemCacheWritePolicy | |||
| DmiInteger as systemCacheErrorCorrection | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| DmiInteger as systemCacheType | |||
| DmiInteger as lineSize | |||
| DmiInteger as volatility | |||
| DmiInteger as replacementPolicy | |||
| DmiInteger as readPolicy | |||
| DmiInteger as flushTimer | |||
| DmiInteger as associativity | |||
| SdmtfSystemContactInformation | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemContactInformationState | |||
| DmiInteger as contactIndex | |||
| DmiString as contactName | |||
| DmiInteger as contactType | |||
| DmiString as contactInformation | |||
| SdmtfSystemEnclosure | |||
| SEQUENCE | |||
| DmiInteger as enclosureOrChassisType | |||
| DmiString as assetTag | |||
| DmiInteger as chassisLockPresent | |||
| DmiInteger as bootupState | |||
| DmiInteger as powerState | |||
| DmiInteger as thermalState | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfSystemHardwareSecurity | |||
| SEQUENCE | |||
| DmiInteger as powerOnPasswordStatus | |||
| DmiInteger as keyboardPasswordStatus | |||
| DmiInteger as administratorPasswordStatis | |||
| DmiInteger as frontPanelResetStatus | |||
| SdmtfSystemMemorySettings | |||
| SEQUENCE | |||
| DmiInteger as totalPhysicalMemory | |||
| DmiInteger as freePhysicalMemory | |||
| DmiInteger as totalSizeOfPagingFiles | |||
| DmiInteger as totalFreeSpaceInPagingFiles | |||
| DmiInteger as totalVirtualMemory | |||
| DmiInteger as freeVirtualMemory | |||
| SdmtfSystemPowerControls | |||
| SEQUENCE | |||
| DmiInteger as powerControlRequest | |||
| DmiInteger as timedPowerOnAvailable | |||
| DmiInteger as timeToNextScheduledPowerOn | |||
| SdmtfSystemReset | |||
| SEQUENCE | |||
| DmiInteger as automaticSystemResetCapability | |||
| DmiInteger as automaticSystemResetStatus | |||
| DmiInteger as automaticSystemResetBootOption | |||
| DmiInteger as automaticSystemResetCount | |||
| DmiInteger as automaticSystemResetLimit | |||
| DmiInteger as automaticSystemResetBootOptionAtLimit | |||
| DmiInteger as automaticSystemResetTimerInterval | |||
| DmiInteger as automaticSystemResetTimerInterval | |||
| DmiInteger as automaticSystemResetTimerReset | |||
| DmiInteger as systemResetTimeout | |||
| DmiInteger as systemResetBootOption | |||
| SdmtfSystemResourceDMAInfo | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemResourceDMAInfoState | |||
| DmiInteger as systemResourceDMAInfoIndex | |||
| DmiInteger as dMATransferWidth | |||
| DmiInteger as dMAAddressSize | |||
| DmiInteger as dMAMaximumTransferSize | |||
| DmiInteger as dMATransferPreference | |||
| DmiInteger as busMaster | |||
| DmiInteger as byteMode | |||
| DmiInteger as wordMode | |||
| DmiInteger as channelTiming | |||
| DmiInteger as typeCTiming | |||
| SdmtfSystemResourceDeviceInfo | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemResourceDeviceInfoState | |||
| DmiInteger as resourceUser | |||
| DmiInteger as deviceID | |||
| DmiInteger as deviceSerialNumber | |||
| DmiInteger as logicalDeviceIDClassCode | |||
| DmiInteger as deviceFlags | |||
| DmiInteger as deviceNumber | |||
| DmiInteger as deviceNumber | |||
| DmiInteger as busType | |||
| DmiInteger as cMReserved | |||
| SdmtfSystemResourceIOInfo | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemResourceIOInfoState | |||
| DmiInteger as systemResourceIOInfoIndex | |||
| DmiInteger as iODecode | |||
| SdmtfSystemResourceIRQInfo | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemResourceIRQInfoState | |||
| DmiInteger as systemResourceIRQInfoIndex | |||
| DmiInteger as triggerType | |||
| DmiInteger as triggerLevel | |||
| SdmtfSystemResourceMemoryInfo | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemResourceMemoryInfoState | |||
| DmiInteger as systemResourceMemoryInfoIndex | |||
| DmiInteger as iSAPCMCIARangeDescriptor | |||
| DmiInteger as eISARangeDescriptor | |||
| DmiInteger as decodeSupport | |||
| DmiInteger as cacheable | |||
| DmiInteger as cacheType | |||
| DmiInteger as readWrite | |||
| SdmtfSystemResources2 | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemResources2State | |||
| DmiInteger as systemResourcesIndex | |||
| DmiInteger as resourceUser | |||
| DmiInteger as resourceSet | |||
| DmiInteger as resourceAssignment | |||
| DmiInteger as resourceType | |||
| DmiInteger as resourceNumber | |||
| DmiInteger as resourceInfoID | |||
| DmiInteger64 as startAddress | |||
| DmiInteger64 as endAddress | |||
| DmiInteger as resourceSize | |||
| DmiInteger as baseAlignment | |||
| DmiInteger as shareable | |||
| DmiInteger as shared | |||
| SdmtfSystemResourcesDescription | |||
| SEQUENCE | |||
| DmiInteger as deviceCount | |||
| DmiInteger as systemResourceCount | |||
| SdmtfSystemResources | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemResourcesState | |||
| DmiInteger as resourceInstance | |||
| DmiInteger as resourceNumber | |||
| DmiInteger as resourceType | |||
| DmiInteger as resourceBase | |||
| DmiInteger as resourceSize | |||
| DmiInteger as resourceFlags | |||
| DmiInteger as resourceGroupID | |||
| SdmtfSystemSlot | |||
| SEQUENCE | |||
| INTEGER as dmtfSystemSlotState | |||
| DmiInteger as slotIndex | |||
| DmiInteger64 as slotType | |||
| DmiInteger as slotWidth | |||
| DmiInteger as currentUsage | |||
| DmiString as slotDescription | |||
| DmiInteger as slotCategory | |||
| DmiInteger as virtualSlot | |||
| DmiInteger as resourceUserID | |||
| DmiInteger64 as vccMixedVoltageSupport | |||
| DmiInteger64 as vppMixedVoltageSupport | |||
| DmiInteger as slotThermalRating | |||
| SdmtfTemperatureProbe | |||
| SEQUENCE | |||
| INTEGER as dmtfTemperatureProbeState | |||
| DmiInteger as temperatureProbeTableIndex | |||
| DmiInteger as temperatureProbeLocation | |||
| DmiString as temperatureProbeDescription | |||
| DmiInteger as temperatureStatus | |||
| DmiInteger as temperatureProbeTemperatureReading | |||
| DmiInteger as monitoredTemperatureNominalReading | |||
| DmiInteger as monitoredTemperatureNormalMaximum | |||
| DmiInteger as monitoredTemperatureNormalMinimum | |||
| DmiInteger as temperatureProbeMaximum | |||
| DmiInteger as temperatureProbeMinimum | |||
| DmiInteger as temperatureReadingLowerThresholdNonCritical | |||
| DmiInteger as temperatureReadingUpperThresholdNonCritical | |||
| DmiInteger as temperatureReadingLowerThresholdCritical | |||
| DmiInteger as temperatureReadingUpperThresholdCritical | |||
| DmiInteger as temperatureReadingLowerThresholdNonRecoverable | |||
| DmiInteger as temperatureReadingUpperThresholdNonRecoverable | |||
| DmiInteger as temperatureProbeResolution | |||
| DmiInteger as temperatureProbeTolerance | |||
| DmiInteger as temperatureProbeAccuracy | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfUPSBattery | |||
| SEQUENCE | |||
| DmiInteger as batteryStatus | |||
| DmiCounter as secondsOnBattery | |||
| DmiInteger as estimatedMinutesRemaining | |||
| DmiGauge as estimatedChargeRemaining | |||
| DmiGauge as batteryVoltage | |||
| DmiGauge as batteryCurrent | |||
| DmiInteger as temperatureProbeIndex | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfVideoBIOSCharacteristic | |||
| SEQUENCE | |||
| INTEGER as dmtfVideoBIOSCharacteristicState | |||
| DmiInteger as videoBIOSCharacteristicIndex | |||
| DmiInteger as videoBIOSNumber | |||
| DmiInteger as videoBIOSCharacteristic | |||
| DmiString as videoBIOSCharacteristicDescription | |||
| SdmtfVideoBIOS | |||
| SEQUENCE | |||
| INTEGER as dmtfVideoBIOSState | |||
| DmiInteger as videoBIOSIndex | |||
| DmiString as videoBIOSManufacturer | |||
| DmiString as videoBIOSVersion | |||
| DmiDate as videoBIOSReleaseDate | |||
| DmiInteger as videoBIOSShadowingState | |||
| SdmtfVideo | |||
| SEQUENCE | |||
| INTEGER as dmtfVideoState | |||
| DmiInteger as videoIndex | |||
| DmiInteger as videoType | |||
| DmiInteger as currentVideoMode | |||
| DmiInteger as minimumRefreshRate | |||
| DmiInteger as maximumRefreshRate | |||
| DmiInteger as videoMemoryType | |||
| DmiInteger as videoRAMMemorySize | |||
| DmiInteger as scanMode | |||
| DmiInteger as videoPhysicalLocation | |||
| DmiInteger as currentVerticalResolution | |||
| DmiInteger as currentHorizontalResolution | |||
| DmiInteger as currentNumberOfBitsPerPixel | |||
| DmiInteger as currentNumberOfRows | |||
| DmiInteger as currentNumberOfColumns | |||
| DmiInteger as currentRefreshRate | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||
| SdmtfVoltageProbe | |||
| SEQUENCE | |||
| INTEGER as dmtfVoltageProbeState | |||
| DmiInteger as voltageProbeIndex | |||
| DmiInteger as voltageProbeLocation | |||
| DmiString as voltageProbeDescription | |||
| DmiInteger as voltageStatus | |||
| DmiInteger as voltageProbeVoltageLevel | |||
| DmiInteger as monitoredVoltageNominalLevel | |||
| DmiInteger as monitoredVoltageNormalMaximum | |||
| DmiInteger as monitoredVoltageNormalMinimum | |||
| DmiInteger as voltageProbeMaximum | |||
| DmiInteger as voltageProbeMinimum | |||
| DmiInteger as voltageLevelLowerThresholdNonCritical | |||
| DmiInteger as voltageLevelUpperThresholdNonCritical | |||
| DmiInteger as voltageLevelLowerThresholdCritical | |||
| DmiInteger as voltageLevelUpperThresholdCritical | |||
| DmiInteger as voltageLevelLowerThresholdNonRecoverable | |||
| DmiInteger as voltageLevelUpperThresholdNonRecoverable | |||
| DmiInteger as voltageProbeResolution | |||
| DmiInteger as voltageProbeTolerance | |||
| DmiInteger as voltageProbeAccuracy | |||
| DmiInteger as fRUGroupIndex | |||
| DmiInteger as operationalGroupIndex | |||