DOCS-IETF-BPI2-MIB

File: DOCS-IETF-BPI2-MIB.mib (139019 bytes)

Imported modules

SNMPv2-SMI SNMP-FRAMEWORK-MIB SNMPv2-TC
SNMPv2-CONF IF-MIB INET-ADDRESS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 Counter32 mib-2
SnmpAdminString TEXTUAL-CONVENTION MacAddress
RowStatus TruthValue DateAndTime
StorageType OBJECT-GROUP MODULE-COMPLIANCE
ifIndex InetAddressType InetAddress

Defined Objects

docsBpi2MIB 1.3.6.1.2.1.126
This is the MIB module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination systems (CMTSs). Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4131; see the RFC itself for full legal notices.
MODULE-IDENTITY    

docsBpi2Notification 1.3.6.1.2.1.126.0
OBJECT IDENTIFIER    

docsBpi2MIBObjects 1.3.6.1.2.1.126.1
OBJECT IDENTIFIER    

docsBpi2CmObjects 1.3.6.1.2.1.126.1.1
OBJECT IDENTIFIER    

docsBpi2CmBaseTable 1.3.6.1.2.1.126.1.1.1
This table describes the basic and authorization- related Baseline Privacy Plus attributes of each CM MAC interface.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmBaseEntry

docsBpi2CmBaseEntry 1.3.6.1.2.1.126.1.1.1.1
Each entry contains objects describing attributes of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
OBJECT-TYPE    
  DocsBpi2CmBaseEntry  

docsBpi2CmPrivacyEnable 1.3.6.1.2.1.126.1.1.1.1.1
This object identifies whether this CM is provisioned to run Baseline Privacy Plus.
OBJECT-TYPE    
  TruthValue  

docsBpi2CmPublicKey 1.3.6.1.2.1.126.1.1.1.1.2
The value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1), corresponding to the public key of the CM.
OBJECT-TYPE    
  OCTET STRING SIZE(0..524)  

docsBpi2CmAuthState 1.3.6.1.2.1.126.1.1.1.1.3
The value of this object is the state of the CM authorization FSM. The start state indicates that FSM is in its initial state.
OBJECT-TYPE    
  INTEGER start(1), authWait(2), authorized(3), reauthWait(4), authRejectWait(5), silent(6)  

docsBpi2CmAuthKeySequenceNumber 1.3.6.1.2.1.126.1.1.1.1.4
The value of this object is the most recent authorization key sequence number for this FSM.
OBJECT-TYPE    
  Integer32 0..15  

docsBpi2CmAuthExpiresOld 1.3.6.1.2.1.126.1.1.1.1.5
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent authorization key for this FSM. If this FSM has only one authorization key, then the value is the time of activation of this FSM.
OBJECT-TYPE    
  DateAndTime  

docsBpi2CmAuthExpiresNew 1.3.6.1.2.1.126.1.1.1.1.6
The value of this object is the actual clock time for expiration of the most recent authorization key for this FSM.
OBJECT-TYPE    
  DateAndTime  

docsBpi2CmAuthReset 1.3.6.1.2.1.126.1.1.1.1.7
Setting this object to 'true' generates a Reauthorize event in the authorization FSM. Reading this object always returns FALSE. This object is for testing purposes only, and therefore it is not required to be associated with a last reset object.
OBJECT-TYPE    
  TruthValue  

docsBpi2CmAuthGraceTime 1.3.6.1.2.1.126.1.1.1.1.8
The value of this object is the grace time for an authorization key in seconds. A CM is expected to start trying to get a new authorization key beginning AuthGraceTime seconds before the most recent authorization key actually expires.
OBJECT-TYPE    
  Integer32 1..6047999  

docsBpi2CmTEKGraceTime 1.3.6.1.2.1.126.1.1.1.1.9
The value of this object is the grace time for the TEK in seconds. The CM is expected to start trying to acquire a new TEK beginning TEK GraceTime seconds before the expiration of the most recent TEK.
OBJECT-TYPE    
  Integer32 1..302399  

docsBpi2CmAuthWaitTimeout 1.3.6.1.2.1.126.1.1.1.1.10
The value of this object is the Authorize Wait Timeout in seconds.
OBJECT-TYPE    
  Integer32 1..30  

docsBpi2CmReauthWaitTimeout 1.3.6.1.2.1.126.1.1.1.1.11
The value of this object is the Reauthorize Wait Timeout in seconds.
OBJECT-TYPE    
  Integer32 1..30  

docsBpi2CmOpWaitTimeout 1.3.6.1.2.1.126.1.1.1.1.12
The value of this object is the Operational Wait Timeout in seconds.
OBJECT-TYPE    
  Integer32 1..10  

docsBpi2CmRekeyWaitTimeout 1.3.6.1.2.1.126.1.1.1.1.13
The value of this object is the Rekey Wait Timeout in seconds.
OBJECT-TYPE    
  Integer32 1..10  

docsBpi2CmAuthRejectWaitTimeout 1.3.6.1.2.1.126.1.1.1.1.14
The value of this object is the Authorization Reject Wait Timeout in seconds.
OBJECT-TYPE    
  Integer32 1..600  

docsBpi2CmSAMapWaitTimeout 1.3.6.1.2.1.126.1.1.1.1.15
The value of this object is the retransmission interval, in seconds, of SA Map Requests from the MAP Wait state.
OBJECT-TYPE    
  Integer32 1..10  

docsBpi2CmSAMapMaxRetries 1.3.6.1.2.1.126.1.1.1.1.16
The value of this object is the maximum number of Map Request retries allowed.
OBJECT-TYPE    
  Integer32 0..10  

docsBpi2CmAuthentInfos 1.3.6.1.2.1.126.1.1.1.1.17
The value of this object is the number of times the CM has transmitted an Authentication Information message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmAuthRequests 1.3.6.1.2.1.126.1.1.1.1.18
The value of this object is the number of times the CM has transmitted an Authorization Request message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmAuthReplies 1.3.6.1.2.1.126.1.1.1.1.19
The value of this object is the number of times the CM has received an Authorization Reply message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmAuthRejects 1.3.6.1.2.1.126.1.1.1.1.20
The value of this object is the number of times the CM has received an Authorization Reject message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmAuthInvalids 1.3.6.1.2.1.126.1.1.1.1.21
The value of this object is the count of times the CM has received an Authorization Invalid message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmAuthRejectErrorCode 1.3.6.1.2.1.126.1.1.1.1.22
The value of this object is the enumerated description of the Error-Code in the most recent Authorization Reject message received by the CM. This has the value unknown(2) if the last Error-Code value was 0 and none(1) if no Authorization Reject message has been received since reboot.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), unauthorizedCm(3), unauthorizedSaid(4), permanentAuthorizationFailure(8), timeOfDayNotAcquired(11)  

docsBpi2CmAuthRejectErrorString 1.3.6.1.2.1.126.1.1.1.1.23
The value of this object is the text string in the most recent Authorization Reject message received by the CM. This is a zero length string if no Authorization Reject message has been received since reboot.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmAuthInvalidErrorCode 1.3.6.1.2.1.126.1.1.1.1.24
The value of this object is the enumerated description of the Error-Code in the most recent Authorization Invalid message received by the CM. This has the value unknown(2) if the last Error-Code value was 0 and none(1) if no Authorization Invalid message has been received since reboot.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), unauthorizedCm(3), unsolicited(5), invalidKeySequence(6), keyRequestAuthenticationFailure(7)  

docsBpi2CmAuthInvalidErrorString 1.3.6.1.2.1.126.1.1.1.1.25
The value of this object is the text string in the most recent Authorization Invalid message received by the CM. This is a zero length string if no Authorization Invalid message has been received since reboot.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmTEKTable 1.3.6.1.2.1.126.1.1.2
This table describes the attributes of each CM Traffic Encryption Key (TEK) association. The CM maintains (no more than) one TEK association per SAID per CM MAC interface.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmTEKEntry

docsBpi2CmTEKEntry 1.3.6.1.2.1.126.1.1.2.1
Each entry contains objects describing the TEK association attributes of one SAID. The CM MUST create one entry per SAID, regardless of whether the SAID was obtained from a Registration Response message, from an Authorization Reply message, or from any dynamic SAID establishment mechanisms.
OBJECT-TYPE    
  DocsBpi2CmTEKEntry  

docsBpi2CmTEKSAId 1.3.6.1.2.1.126.1.1.2.1.1
The value of this object is the DOCSIS Security Association ID (SAID).
OBJECT-TYPE    
  DocsSAId  

docsBpi2CmTEKSAType 1.3.6.1.2.1.126.1.1.2.1.2
The value of this object is the type of security association.
OBJECT-TYPE    
  DocsBpkmSAType  

docsBpi2CmTEKDataEncryptAlg 1.3.6.1.2.1.126.1.1.2.1.3
The value of this object is the data encryption algorithm for this SAID.
OBJECT-TYPE    
  DocsBpkmDataEncryptAlg  

docsBpi2CmTEKDataAuthentAlg 1.3.6.1.2.1.126.1.1.2.1.4
The value of this object is the data authentication algorithm for this SAID.
OBJECT-TYPE    
  DocsBpkmDataAuthentAlg  

docsBpi2CmTEKState 1.3.6.1.2.1.126.1.1.2.1.5
The value of this object is the state of the indicated TEK FSM. The start(1) state indicates that the FSM is in its initial state.
OBJECT-TYPE    
  INTEGER start(1), opWait(2), opReauthWait(3), operational(4), rekeyWait(5), rekeyReauthWait(6)  

docsBpi2CmTEKKeySequenceNumber 1.3.6.1.2.1.126.1.1.2.1.6
The value of this object is the most recent TEK key sequence number for this TEK FSM.
OBJECT-TYPE    
  Integer32 0..15  

docsBpi2CmTEKExpiresOld 1.3.6.1.2.1.126.1.1.2.1.7
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK, then the value is the time of activation of this FSM.
OBJECT-TYPE    
  DateAndTime  

docsBpi2CmTEKExpiresNew 1.3.6.1.2.1.126.1.1.2.1.8
The value of this object is the actual clock time for expiration of the most recent TEK for this FSM.
OBJECT-TYPE    
  DateAndTime  

docsBpi2CmTEKKeyRequests 1.3.6.1.2.1.126.1.1.2.1.9
The value of this object is the number of times the CM has transmitted a Key Request message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmTEKKeyReplies 1.3.6.1.2.1.126.1.1.2.1.10
The value of this object is the number of times the CM has received a Key Reply message, including a message whose authentication failed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmTEKKeyRejects 1.3.6.1.2.1.126.1.1.2.1.11
The value of this object is the number of times the CM has received a Key Reject message, including a message whose authentication failed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmTEKInvalids 1.3.6.1.2.1.126.1.1.2.1.12
The value of this object is the number of times the CM has received a TEK Invalid message, including a message whose authentication failed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmTEKAuthPends 1.3.6.1.2.1.126.1.1.2.1.13
The value of this object is the count of times an Authorization Pending (Auth Pend) event occurred in this FSM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmTEKKeyRejectErrorCode 1.3.6.1.2.1.126.1.1.2.1.14
The value of this object is the enumerated description of the Error-Code in the most recent Key Reject message received by the CM. This has the value unknown(2) if the last Error-Code value was 0 and none(1) if no Key Reject message has been received since registration.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), unauthorizedSaid(4)  

docsBpi2CmTEKKeyRejectErrorString 1.3.6.1.2.1.126.1.1.2.1.15
The value of this object is the text string in the most recent Key Reject message received by the CM. This is a zero length string if no Key Reject message has been received since registration.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmTEKInvalidErrorCode 1.3.6.1.2.1.126.1.1.2.1.16
The value of this object is the enumerated description of the Error-Code in the most recent TEK Invalid message received by the CM. This has the value unknown(2) if the last Error-Code value was 0 and none(1) if no TEK Invalid message has been received since registration.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), invalidKeySequence(6)  

docsBpi2CmTEKInvalidErrorString 1.3.6.1.2.1.126.1.1.2.1.17
The value of this object is the text string in the most recent TEK Invalid message received by the CM. This is a zero length string if no TEK Invalid message has been received since registration.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmMulticastObjects 1.3.6.1.2.1.126.1.1.3
OBJECT IDENTIFIER    

docsBpi2CmIpMulticastMapTable 1.3.6.1.2.1.126.1.1.3.1
This table maps multicast IP addresses to SAIDs per CM MAC Interface. It is intended to map multicast IP addresses associated with SA MAP Request messages.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmIpMulticastMapEntry

docsBpi2CmIpMulticastMapEntry 1.3.6.1.2.1.126.1.1.3.1.1
Each entry contains objects describing the mapping of one multicast IP address to one SAID, as well as associated state, message counters, and error information. An entry may be removed from this table upon the reception of an SA Map Reject.
OBJECT-TYPE    
  DocsBpi2CmIpMulticastMapEntry  

docsBpi2CmIpMulticastIndex 1.3.6.1.2.1.126.1.1.3.1.1.1
The index of this row.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

docsBpi2CmIpMulticastAddressType 1.3.6.1.2.1.126.1.1.3.1.1.2
The type of Internet address for docsBpi2CmIpMulticastAddress.
OBJECT-TYPE    
  InetAddressType  

docsBpi2CmIpMulticastAddress 1.3.6.1.2.1.126.1.1.3.1.1.3
This object represents the IP multicast address to be mapped. The type of this address is determined by the value of the docsBpi2CmIpMulticastAddressType object.
OBJECT-TYPE    
  InetAddress  

docsBpi2CmIpMulticastSAId 1.3.6.1.2.1.126.1.1.3.1.1.4
This object represents the SAID to which the IP multicast address has been mapped. If no SA Map Reply has been received for the IP address, this object should have the value 0.
OBJECT-TYPE    
  DocsSAIdOrZero  

docsBpi2CmIpMulticastSAMapState 1.3.6.1.2.1.126.1.1.3.1.1.5
The value of this object is the state of the SA Mapping FSM for this IP.
OBJECT-TYPE    
  INTEGER start(1), mapWait(2), mapped(3)  

docsBpi2CmIpMulticastSAMapRequests 1.3.6.1.2.1.126.1.1.3.1.1.6
The value of this object is the number of times the CM has transmitted an SA Map Request message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmIpMulticastSAMapReplies 1.3.6.1.2.1.126.1.1.3.1.1.7
The value of this object is the number of times the CM has received an SA Map Reply message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmIpMulticastSAMapRejects 1.3.6.1.2.1.126.1.1.3.1.1.8
The value of this object is the number of times the CM has received an SA MAP Reject message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmIpMulticastSAMapRejectErrorCode 1.3.6.1.2.1.126.1.1.3.1.1.9
The value of this object is the enumerated description of the Error-Code in the most recent SA Map Reject message sent in response to an SA Map Request for This IP. It has the value none(1) if no SA MAP Reject message has been received since entry creation.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), noAuthForRequestedDSFlow(9), dsFlowNotMappedToSA(10)  

docsBpi2CmIpMulticastSAMapRejectErrorString 1.3.6.1.2.1.126.1.1.3.1.1.10
The value of this object is the text string in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It is a zero length string if no SA Map Reject message has been received since entry creation.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmCertObjects 1.3.6.1.2.1.126.1.1.4
OBJECT IDENTIFIER    

docsBpi2CmDeviceCertTable 1.3.6.1.2.1.126.1.1.4.1
This table describes the Baseline Privacy Plus device certificates for each CM MAC interface.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmDeviceCertEntry

docsBpi2CmDeviceCertEntry 1.3.6.1.2.1.126.1.1.4.1.1
Each entry contains the device certificates of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
OBJECT-TYPE    
  DocsBpi2CmDeviceCertEntry  

docsBpi2CmDeviceCmCert 1.3.6.1.2.1.126.1.1.4.1.1.1
The X509 DER-encoded cable modem certificate. Note: This object can be set only when the value is the zero-length OCTET STRING; otherwise, an error of 'inconsistentValue' is returned. Once the object contains the certificate, its access MUST be read-only and persists after re-initialization of the managed system.
OBJECT-TYPE    
  DocsX509ASN1DEREncodedCertificate  

docsBpi2CmDeviceManufCert 1.3.6.1.2.1.126.1.1.4.1.1.2
The X509 DER-encoded manufacturer certificate that signed the cable modem certificate.
OBJECT-TYPE    
  DocsX509ASN1DEREncodedCertificate  

docsBpi2CmCryptoSuiteTable 1.3.6.1.2.1.126.1.1.5
This table describes the Baseline Privacy Plus cryptographic suite capabilities for each CM MAC interface.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmCryptoSuiteEntry

docsBpi2CmCryptoSuiteEntry 1.3.6.1.2.1.126.1.1.5.1
Each entry contains a cryptographic suite pair that this CM MAC supports.
OBJECT-TYPE    
  DocsBpi2CmCryptoSuiteEntry  

docsBpi2CmCryptoSuiteIndex 1.3.6.1.2.1.126.1.1.5.1.1
The index for a cryptographic suite row.
OBJECT-TYPE    
  Unsigned32 1..1000  

docsBpi2CmCryptoSuiteDataEncryptAlg 1.3.6.1.2.1.126.1.1.5.1.2
The value of this object is the data encryption algorithm for this cryptographic suite capability.
OBJECT-TYPE    
  DocsBpkmDataEncryptAlg  

docsBpi2CmCryptoSuiteDataAuthentAlg 1.3.6.1.2.1.126.1.1.5.1.3
The value of this object is the data authentication algorithm for this cryptographic suite capability.
OBJECT-TYPE    
  DocsBpkmDataAuthentAlg  

docsBpi2CmtsObjects 1.3.6.1.2.1.126.1.2
OBJECT IDENTIFIER    

docsBpi2CmtsBaseTable 1.3.6.1.2.1.126.1.2.1
This table describes the basic Baseline Privacy attributes of each CMTS MAC interface.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmtsBaseEntry

docsBpi2CmtsBaseEntry 1.3.6.1.2.1.126.1.2.1.1
Each entry contains objects describing attributes of one CMTS MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
OBJECT-TYPE    
  DocsBpi2CmtsBaseEntry  

docsBpi2CmtsDefaultAuthLifetime 1.3.6.1.2.1.126.1.2.1.1.1
The value of this object is the default lifetime, in seconds, that the CMTS assigns to a new authorization key. This object value persists after re-initialization of the managed system.
OBJECT-TYPE    
  Integer32 1..6048000  

docsBpi2CmtsDefaultTEKLifetime 1.3.6.1.2.1.126.1.2.1.1.2
The value of this object is the default lifetime, in seconds, that the CMTS assigns to a new Traffic Encryption Key (TEK). This object value persists after re-initialization of the managed system.
OBJECT-TYPE    
  Integer32 1..604800  

docsBpi2CmtsDefaultSelfSignedManufCertTrust 1.3.6.1.2.1.126.1.2.1.1.3
This object determines the default trust of self-signed manufacturer certificate entries, contained in docsBpi2CmtsCACertTable, and created after this object is set. This object need not persist after re-initialization of the managed system.
OBJECT-TYPE    
  INTEGER trusted(1), untrusted(2)  

docsBpi2CmtsCheckCertValidityPeriods 1.3.6.1.2.1.126.1.2.1.1.4
Setting this object to 'true' causes all chained and root certificates in the chain to have their validity periods checked against the current time of day, when the CMTS receives an Authorization Request from the CM. A 'false' setting causes all certificates in the chain not to have their validity periods checked against the current time of day. This object need not persist after re-initialization of the managed system.
OBJECT-TYPE    
  TruthValue  

docsBpi2CmtsAuthentInfos 1.3.6.1.2.1.126.1.2.1.1.5
The value of this object is the number of times the CMTS has received an Authentication Information message from any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthRequests 1.3.6.1.2.1.126.1.2.1.1.6
The value of this object is the number of times the CMTS has received an Authorization Request message from any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthReplies 1.3.6.1.2.1.126.1.2.1.1.7
The value of this object is the number of times the CMTS has transmitted an Authorization Reply message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthRejects 1.3.6.1.2.1.126.1.2.1.1.8
The value of this object is the number of times the CMTS has transmitted an Authorization Reject message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthInvalids 1.3.6.1.2.1.126.1.2.1.1.9
The value of this object is the number of times the CMTS has transmitted an Authorization Invalid message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsSAMapRequests 1.3.6.1.2.1.126.1.2.1.1.10
The value of this object is the number of times the CMTS has received an SA Map Request message from any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsSAMapReplies 1.3.6.1.2.1.126.1.2.1.1.11
The value of this object is the number of times the CMTS has transmitted an SA Map Reply message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsSAMapRejects 1.3.6.1.2.1.126.1.2.1.1.12
The value of this object is the number of times the CMTS has transmitted an SA Map Reject message to any CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthTable 1.3.6.1.2.1.126.1.2.2
This table describes the attributes of each CM authorization association. The CMTS maintains one authorization association with each Baseline Privacy- enabled CM, registered on each CMTS MAC interface, regardless of whether the CM is authorized or rejected.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmtsAuthEntry

docsBpi2CmtsAuthEntry 1.3.6.1.2.1.126.1.2.2.1
Each entry contains objects describing attributes of one authorization association. The CMTS MUST create one entry per CM per MAC interface, based on the receipt of an Authorization Request message, and MUST not delete the entry until the CM loses registration.
OBJECT-TYPE    
  DocsBpi2CmtsAuthEntry  

docsBpi2CmtsAuthCmMacAddress 1.3.6.1.2.1.126.1.2.2.1.1
The value of this object is the physical address of the CM to which the authorization association applies.
OBJECT-TYPE    
  MacAddress  

docsBpi2CmtsAuthCmBpiVersion 1.3.6.1.2.1.126.1.2.2.1.2
The value of this object is the version of Baseline Privacy for which this CM has registered. The value 'bpiplus' represents the value of BPI-Version Attribute of the Baseline Privacy Key Management BPKM attribute BPI-Version (1). The value 'bpi' is used to represent the CM registered using DOCSIS 1.0 Baseline Privacy.
OBJECT-TYPE    
  INTEGER bpi(0), bpiPlus(1)  

docsBpi2CmtsAuthCmPublicKey 1.3.6.1.2.1.126.1.2.2.1.3
The value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1), corresponding to the public key of the CM. This is the zero-length OCTET STRING if the CMTS does not retain the public key.
OBJECT-TYPE    
  OCTET STRING SIZE(0..524)  

docsBpi2CmtsAuthCmKeySequenceNumber 1.3.6.1.2.1.126.1.2.2.1.4
The value of this object is the most recent authorization key sequence number for this CM.
OBJECT-TYPE    
  Integer32 0..15  

docsBpi2CmtsAuthCmExpiresOld 1.3.6.1.2.1.126.1.2.2.1.5
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent authorization key for this FSM. If this FSM has only one authorization key, then the value is the time of activation of this FSM. Note: This object has no meaning for CMs running in BPI mode; therefore, this object is not instantiated for entries associated to those CMs.
OBJECT-TYPE    
  DateAndTime  

docsBpi2CmtsAuthCmExpiresNew 1.3.6.1.2.1.126.1.2.2.1.6
The value of this object is the actual clock time for expiration of the most recent authorization key for this FSM.
OBJECT-TYPE    
  DateAndTime  

docsBpi2CmtsAuthCmLifetime 1.3.6.1.2.1.126.1.2.2.1.7
The value of this object is the lifetime, in seconds, that the CMTS assigns to an authorization key for this CM.
OBJECT-TYPE    
  Integer32 1..6048000  

docsBpi2CmtsAuthCmReset 1.3.6.1.2.1.126.1.2.2.1.8
Setting this object to invalidateAuth(2) causes the CMTS to invalidate the current CM authorization key(s), but not to transmit an Authorization Invalid message nor to invalidate the primary SAID's TEKs. Setting this object to sendAuthInvalid(3) causes the CMTS to invalidate the current CM authorization key(s), and to transmit an Authorization Invalid message to the CM, but not to invalidate the primary SAID's TEKs. Setting this object to invalidateTeks(4) causes the CMTS to invalidate the current CM authorization key(s), to transmit an Authorization Invalid message to the CM, and to invalidate the TEKs associated with this CM's primary SAID. For BPI mode, substitute all of the CM's unicast TEKs for the primary SAID's TEKs in the previous paragraph. Reading this object returns the most recently set value of this object or, if the object has not been set since entry creation, returns noResetRequested(1).
OBJECT-TYPE    
  INTEGER noResetRequested(1), invalidateAuth(2), sendAuthInvalid(3), invalidateTeks(4)  

docsBpi2CmtsAuthCmInfos 1.3.6.1.2.1.126.1.2.2.1.9
The value of this object is the number of times the CMTS has received an Authentication Information message from this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthCmRequests 1.3.6.1.2.1.126.1.2.2.1.10
The value of this object is the number of times the CMTS has received an Authorization Request message from this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthCmReplies 1.3.6.1.2.1.126.1.2.2.1.11
The value of this object is the number of times the CMTS has transmitted an Authorization Reply message to this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthCmRejects 1.3.6.1.2.1.126.1.2.2.1.12
The value of this object is the number of times the CMTS has transmitted an Authorization Reject message to this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthCmInvalids 1.3.6.1.2.1.126.1.2.2.1.13
The value of this object is the number of times the CMTS has transmitted an Authorization Invalid message to this CM. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsAuthRejectErrorCode 1.3.6.1.2.1.126.1.2.2.1.14
The value of this object is the enumerated description of the Error-Code in the most recent Authorization Reject message transmitted to the CM. This has the value unknown(2) if the last Error-Code value was 0 and none(1) if no Authorization Reject message has been transmitted to the CM since entry creation.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), unauthorizedCm(3), unauthorizedSaid(4), permanentAuthorizationFailure(8), timeOfDayNotAcquired(11)  

docsBpi2CmtsAuthRejectErrorString 1.3.6.1.2.1.126.1.2.2.1.15
The value of this object is the text string in the most recent Authorization Reject message transmitted to the CM. This is a zero length string if no Authorization Reject message has been transmitted to the CM since entry creation.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmtsAuthInvalidErrorCode 1.3.6.1.2.1.126.1.2.2.1.16
The value of this object is the enumerated description of the Error-Code in the most recent Authorization Invalid message transmitted to the CM. This has the value unknown(2) if the last Error-Code value was 0 and none(1) if no Authorization Invalid message has been transmitted to the CM since entry creation.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), unauthorizedCm(3), unsolicited(5), invalidKeySequence(6), keyRequestAuthenticationFailure(7)  

docsBpi2CmtsAuthInvalidErrorString 1.3.6.1.2.1.126.1.2.2.1.17
The value of this object is the text string in the most recent Authorization Invalid message transmitted to the CM. This is a zero length string if no Authorization Invalid message has been transmitted to the CM since entry creation.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmtsAuthPrimarySAId 1.3.6.1.2.1.126.1.2.2.1.18
The value of this object is the Primary Security Association identifier. For BPI mode, the value must be any unicast SID.
OBJECT-TYPE    
  DocsSAIdOrZero  

docsBpi2CmtsAuthBpkmCmCertValid 1.3.6.1.2.1.126.1.2.2.1.19
Contains the reason why a CM's certificate is deemed valid or invalid. Return unknown(0) if the CM is running BPI mode. ValidCmChained(1) means the certificate is valid because it chains to a valid certificate. ValidCmTrusted(2) means the certificate is valid because it has been provisioned (in the docsBpi2CmtsProvisionedCmCert table) to be trusted. InvalidCmUntrusted(3) means the certificate is invalid because it has been provisioned (in the docsBpi2CmtsProvisionedCmCert table) to be untrusted. InvalidCAUntrusted(4) means the certificate is invalid because it chains to an untrusted certificate. InvalidCmOther(5) and InvalidCAOther(6) refer to errors in parsing, validity periods, etc., which are attributable to the CM certificate or its chain, respectively; additional information may be found in docsBpi2AuthRejectErrorString for these types of errors.
OBJECT-TYPE    
  INTEGER unknown(0), validCmChained(1), validCmTrusted(2), invalidCmUntrusted(3), invalidCAUntrusted(4), invalidCmOther(5), invalidCAOther(6)  

docsBpi2CmtsAuthBpkmCmCert 1.3.6.1.2.1.126.1.2.2.1.20
The X509 CM Certificate sent as part of a BPKM Authorization Request. Note: The zero-length OCTET STRING must be returned if the Entire certificate is not retained in the CMTS.
OBJECT-TYPE    
  DocsX509ASN1DEREncodedCertificate  

docsBpi2CmtsAuthCACertIndexPtr 1.3.6.1.2.1.126.1.2.2.1.21
A row index into docsBpi2CmtsCACertTable. Returns the index in docsBpi2CmtsCACertTable to which CA certificate this CM is chained to. A value of 0 means it could not be found or not applicable.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

docsBpi2CmtsTEKTable 1.3.6.1.2.1.126.1.2.3
This table describes the attributes of each Traffic Encryption Key (TEK) association. The CMTS Maintains one TEK association per SAID on each CMTS MAC interface.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmtsTEKEntry

docsBpi2CmtsTEKEntry 1.3.6.1.2.1.126.1.2.3.1
Each entry contains objects describing attributes of one TEK association on a particular CMTS MAC interface. The CMTS MUST create one entry per SAID per MAC interface, based on the receipt of a Key Request message, and MUST not delete the entry before the CM authorization for the SAID permanently expires.
OBJECT-TYPE    
  DocsBpi2CmtsTEKEntry  

docsBpi2CmtsTEKSAId 1.3.6.1.2.1.126.1.2.3.1.1
The value of this object is the DOCSIS Security Association ID (SAID).
OBJECT-TYPE    
  DocsSAId  

docsBpi2CmtsTEKSAType 1.3.6.1.2.1.126.1.2.3.1.2
The value of this object is the type of security association. 'dynamic' does not apply to CMs running in BPI mode. Unicast BPI TEKs must utilize the 'primary' encoding, and multicast BPI TEKs must utilize the 'static' encoding.
OBJECT-TYPE    
  DocsBpkmSAType  

docsBpi2CmtsTEKDataEncryptAlg 1.3.6.1.2.1.126.1.2.3.1.3
The value of this object is the data encryption algorithm for this SAID.
OBJECT-TYPE    
  DocsBpkmDataEncryptAlg  

docsBpi2CmtsTEKDataAuthentAlg 1.3.6.1.2.1.126.1.2.3.1.4
The value of this object is the data authentication algorithm for this SAID.
OBJECT-TYPE    
  DocsBpkmDataAuthentAlg  

docsBpi2CmtsTEKLifetime 1.3.6.1.2.1.126.1.2.3.1.5
The value of this object is the lifetime, in seconds, that the CMTS assigns to keys for this TEK association.
OBJECT-TYPE    
  Integer32 1..604800  

docsBpi2CmtsTEKKeySequenceNumber 1.3.6.1.2.1.126.1.2.3.1.6
The value of this object is the most recent TEK key sequence number for this SAID.
OBJECT-TYPE    
  Integer32 0..15  

docsBpi2CmtsTEKExpiresOld 1.3.6.1.2.1.126.1.2.3.1.7
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK, then the value is the time of activation of this FSM.
OBJECT-TYPE    
  DateAndTime  

docsBpi2CmtsTEKExpiresNew 1.3.6.1.2.1.126.1.2.3.1.8
The value of this object is the actual clock time for expiration of the most recent TEK for this FSM.
OBJECT-TYPE    
  DateAndTime  

docsBpi2CmtsTEKReset 1.3.6.1.2.1.126.1.2.3.1.9
Setting this object to 'true' causes the CMTS to invalidate all currently active TEKs and to generate new TEKs for the associated SAID; the CMTS MAY also generate unsolicited TEK Invalid messages, to optimize the TEK synchronization between the CMTS and the CM(s). Reading this object always returns FALSE.
OBJECT-TYPE    
  TruthValue  

docsBpi2CmtsKeyRequests 1.3.6.1.2.1.126.1.2.3.1.10
The value of this object is the number of times the CMTS has received a Key Request message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsKeyReplies 1.3.6.1.2.1.126.1.2.3.1.11
The value of this object is the number of times the CMTS has transmitted a Key Reply message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsKeyRejects 1.3.6.1.2.1.126.1.2.3.1.12
The value of this object is the number of times the CMTS has transmitted a Key Reject message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsTEKInvalids 1.3.6.1.2.1.126.1.2.3.1.13
The value of this object is the number of times the CMTS has transmitted a TEK Invalid message. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsKeyRejectErrorCode 1.3.6.1.2.1.126.1.2.3.1.14
The value of this object is the enumerated description of the Error-Code in the most recent Key Reject message sent in response to a Key Request for this SAID. This has the value unknown(2) if the last Error-Code value was 0 and none(1) if no Key Reject message has been received since registration.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), unauthorizedSaid(4)  

docsBpi2CmtsKeyRejectErrorString 1.3.6.1.2.1.126.1.2.3.1.15
The value of this object is the text string in the most recent Key Reject message sent in response to a Key Request for this SAID. This is a zero length string if no Key Reject message has been received since registration.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmtsTEKInvalidErrorCode 1.3.6.1.2.1.126.1.2.3.1.16
The value of this object is the enumerated description of the Error-Code in the most recent TEK Invalid message sent in association with this SAID. This has the value unknown(2) if the last Error-Code value was 0 and none(1) if no TEK Invalid message has been received since registration.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), invalidKeySequence(6)  

docsBpi2CmtsTEKInvalidErrorString 1.3.6.1.2.1.126.1.2.3.1.17
The value of this object is the text string in the most recent TEK Invalid message sent in association with this SAID. This is a zero length string if no TEK Invalid message has been received since registration.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmtsMulticastObjects 1.3.6.1.2.1.126.1.2.4
OBJECT IDENTIFIER    

docsBpi2CmtsIpMulticastMapTable 1.3.6.1.2.1.126.1.2.4.1
This table maps multicast IP addresses to SAIDs. If a multicast IP address is mapped by multiple rows in the table, the row with the lowest docsBpi2CmtsIpMulticastIndex must be utilized for the mapping.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmtsIpMulticastMapEntry

docsBpi2CmtsIpMulticastMapEntry 1.3.6.1.2.1.126.1.2.4.1.1
Each entry contains objects describing the mapping of a set of multicast IP address and the mask to one SAID associated to a CMTS MAC Interface, as well as associated message counters and error information.
OBJECT-TYPE    
  DocsBpi2CmtsIpMulticastMapEntry  

docsBpi2CmtsIpMulticastIndex 1.3.6.1.2.1.126.1.2.4.1.1.1
The index of this row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

docsBpi2CmtsIpMulticastAddressType 1.3.6.1.2.1.126.1.2.4.1.1.2
The type of Internet address for docsBpi2CmtsIpMulticastAddress and docsBpi2CmtsIpMulticastMask.
OBJECT-TYPE    
  InetAddressType  

docsBpi2CmtsIpMulticastAddress 1.3.6.1.2.1.126.1.2.4.1.1.3
This object represents the IP multicast address to be mapped, in conjunction with docsBpi2CmtsIpMulticastMask. The type of this address is determined by the value of the object docsBpi2CmtsIpMulticastAddressType.
OBJECT-TYPE    
  InetAddress  

docsBpi2CmtsIpMulticastMask 1.3.6.1.2.1.126.1.2.4.1.1.4
This object represents the IP multicast address mask for this row. An IP multicast address matches this row if the logical AND of the address with docsBpi2CmtsIpMulticastMask is identical to the logical AND of docsBpi2CmtsIpMulticastAddr with docsBpi2CmtsIpMulticastMask. The type of this address is determined by the value of the object docsBpi2CmtsIpMulticastAddressType. Note: For IPv6, this object need not represent a contiguous netmask; e.g., to associate a SAID to a multicast group matching 'any' multicast scope. The TC InetAddressPrefixLength is not used, as it only represents contiguous netmask.
OBJECT-TYPE    
  InetAddress  

docsBpi2CmtsIpMulticastSAId 1.3.6.1.2.1.126.1.2.4.1.1.5
This object represents the multicast SAID to be used in this IP multicast address mapping entry.
OBJECT-TYPE    
  DocsSAIdOrZero  

docsBpi2CmtsIpMulticastSAType 1.3.6.1.2.1.126.1.2.4.1.1.6
The value of this object is the type of security association. 'dynamic' does not apply to CMs running in BPI mode. Unicast BPI TEKs must utilize the 'primary' encoding, and multicast BPI TEKs must utilize the 'static' encoding. By default, SNMP created entries set this object to 'static' if not set at row creation.
OBJECT-TYPE    
  DocsBpkmSAType  

docsBpi2CmtsIpMulticastDataEncryptAlg 1.3.6.1.2.1.126.1.2.4.1.1.7
The value of this object is the data encryption algorithm for this IP.
OBJECT-TYPE    
  DocsBpkmDataEncryptAlg  

docsBpi2CmtsIpMulticastDataAuthentAlg 1.3.6.1.2.1.126.1.2.4.1.1.8
The value of this object is the data authentication algorithm for this IP.
OBJECT-TYPE    
  DocsBpkmDataAuthentAlg  

docsBpi2CmtsIpMulticastSAMapRequests 1.3.6.1.2.1.126.1.2.4.1.1.9
The value of this object is the number of times the CMTS has received an SA Map Request message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsIpMulticastSAMapReplies 1.3.6.1.2.1.126.1.2.4.1.1.10
The value of this object is the number of times the CMTS has transmitted an SA Map Reply message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsIpMulticastSAMapRejects 1.3.6.1.2.1.126.1.2.4.1.1.11
The value of this object is the number of times the CMTS has transmitted an SA Map Reject message for this IP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

docsBpi2CmtsIpMulticastSAMapRejectErrorCode 1.3.6.1.2.1.126.1.2.4.1.1.12
The value of this object is the enumerated description of the Error-Code in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It has the value unknown(2) if the last Error-Code Value was 0 and none(1) if no SA MAP Reject message has been received since entry creation.
OBJECT-TYPE    
  INTEGER none(1), unknown(2), noAuthForRequestedDSFlow(9), dsFlowNotMappedToSA(10)  

docsBpi2CmtsIpMulticastSAMapRejectErrorString 1.3.6.1.2.1.126.1.2.4.1.1.13
The value of this object is the text string in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It is a zero length string if no SA Map Reject message has been received since entry creation.
OBJECT-TYPE    
  SnmpAdminString SIZE(0..128)  

docsBpi2CmtsIpMulticastMapControl 1.3.6.1.2.1.126.1.2.4.1.1.14
This object controls and reflects the IP multicast address mapping entry. There is no restriction on the ability to change values in this row while the row is active. A created row can be set to active only after the Corresponding instances of docsBpi2CmtsIpMulticastAddress, docsBpi2CmtsIpMulticastMask, docsBpi2CmtsIpMulticastSAId, and docsBpi2CmtsIpMulticastSAType have all been set.
OBJECT-TYPE    
  RowStatus  

docsBpi2CmtsIpMulticastMapStorageType 1.3.6.1.2.1.126.1.2.4.1.1.15
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
OBJECT-TYPE    
  StorageType  

docsBpi2CmtsMulticastAuthTable 1.3.6.1.2.1.126.1.2.4.2
This table describes the multicast SAID authorization for each CM on each CMTS MAC interface.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmtsMulticastAuthEntry

docsBpi2CmtsMulticastAuthEntry 1.3.6.1.2.1.126.1.2.4.2.1
Each entry contains objects describing the key authorization of one cable modem for one multicast SAID for one CMTS MAC interface. Row entries persist after re-initialization of the managed system.
OBJECT-TYPE    
  DocsBpi2CmtsMulticastAuthEntry  

docsBpi2CmtsMulticastAuthSAId 1.3.6.1.2.1.126.1.2.4.2.1.1
This object represents the multicast SAID for authorization.
OBJECT-TYPE    
  DocsSAId  

docsBpi2CmtsMulticastAuthCmMacAddress 1.3.6.1.2.1.126.1.2.4.2.1.2
This object represents the MAC address of the CM to which the multicast SAID authorization applies.
OBJECT-TYPE    
  MacAddress  

docsBpi2CmtsMulticastAuthControl 1.3.6.1.2.1.126.1.2.4.2.1.3
The status of this conceptual row for the authorization of multicast SAIDs to CMs.
OBJECT-TYPE    
  RowStatus  

docsBpi2CmtsCertObjects 1.3.6.1.2.1.126.1.2.5
OBJECT IDENTIFIER    

docsBpi2CmtsProvisionedCmCertTable 1.3.6.1.2.1.126.1.2.5.1
A table of CM certificate trust entries provisioned to the CMTS. The trust object for a certificate in this table has an overriding effect on the validity object of a certificate in the authorization table, as long as the entire contents of the two certificates are identical.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmtsProvisionedCmCertEntry

docsBpi2CmtsProvisionedCmCertEntry 1.3.6.1.2.1.126.1.2.5.1.1
An entry in the CMTS's provisioned CM certificate table. Row entries persist after re-initialization of the managed system.
OBJECT-TYPE    
  DocsBpi2CmtsProvisionedCmCertEntry  

docsBpi2CmtsProvisionedCmCertMacAddress 1.3.6.1.2.1.126.1.2.5.1.1.1
The index of this row.
OBJECT-TYPE    
  MacAddress  

docsBpi2CmtsProvisionedCmCertTrust 1.3.6.1.2.1.126.1.2.5.1.1.2
Trust state for the provisioned CM certificate entry. Note: Setting this object need only override the validity of CM certificates sent in future authorization requests; instantaneous effect need not occur.
OBJECT-TYPE    
  INTEGER trusted(1), untrusted(2)  

docsBpi2CmtsProvisionedCmCertSource 1.3.6.1.2.1.126.1.2.5.1.1.3
This object indicates how the certificate reached the CMTS. Other(4) means that it originated from a source not identified above.
OBJECT-TYPE    
  INTEGER snmp(1), configurationFile(2), externalDatabase(3), other(4)  

docsBpi2CmtsProvisionedCmCertStatus 1.3.6.1.2.1.126.1.2.5.1.1.4
The status of this conceptual row. Values in this row cannot be changed while the row is 'active'.
OBJECT-TYPE    
  RowStatus  

docsBpi2CmtsProvisionedCmCert 1.3.6.1.2.1.126.1.2.5.1.1.5
An X509 DER-encoded Certificate Authority certificate. Note: The zero-length OCTET STRING must be returned, on reads, if the entire certificate is not retained in the CMTS.
OBJECT-TYPE    
  DocsX509ASN1DEREncodedCertificate  

docsBpi2CmtsCACertTable 1.3.6.1.2.1.126.1.2.5.2
The table of known Certificate Authority certificates acquired by this device.
OBJECT-TYPE    
  SEQUENCE OF  
    DocsBpi2CmtsCACertEntry

docsBpi2CmtsCACertEntry 1.3.6.1.2.1.126.1.2.5.2.1
A row in the Certificate Authority certificate table. Row entries with the trust status 'trusted', 'untrusted', or 'root' persist after re-initialization of the managed system.
OBJECT-TYPE    
  DocsBpi2CmtsCACertEntry  

docsBpi2CmtsCACertIndex 1.3.6.1.2.1.126.1.2.5.2.1.1
The index for this row.
OBJECT-TYPE    
  Unsigned32 1..4294967295  

docsBpi2CmtsCACertSubject 1.3.6.1.2.1.126.1.2.5.2.1.2
The subject name exactly as it is encoded in the X509 certificate. The organizationName portion of the certificate's subject name must be present. All other fields are optional. Any optional field present must be prepended with (carriage return, U+000D) (line feed, U+000A). Ordering of fields present must conform to the following: organizationName countryName stateOrProvinceName localityName organizationalUnitName organizationalUnitName= commonName
OBJECT-TYPE    
  SnmpAdminString  

docsBpi2CmtsCACertIssuer 1.3.6.1.2.1.126.1.2.5.2.1.3
The issuer name exactly as it is encoded in the X509 certificate. The commonName portion of the certificate's issuer name must be present. All other fields are optional. Any optional field present must be prepended with (carriage return, U+000D) (line feed, U+000A). Ordering of fields present must conform to the following: CommonName countryName stateOrProvinceName localityName organizationName organizationalUnitName organizationalUnitName=
OBJECT-TYPE    
  SnmpAdminString  

docsBpi2CmtsCACertSerialNumber 1.3.6.1.2.1.126.1.2.5.2.1.4
This CA certificate's serial number, represented as an octet string.
OBJECT-TYPE    
  OCTET STRING SIZE(1..32)  

docsBpi2CmtsCACertTrust 1.3.6.1.2.1.126.1.2.5.2.1.5
This object controls the trust status of this certificate. Root certificates must be given root(4) trust; manufacturer certificates must not be given root(4) trust. Trust on root certificates must not change. Note: Setting this object need only affect the validity of CM certificates sent in future authorization requests; instantaneous effect need not occur.
OBJECT-TYPE    
  INTEGER trusted(1), untrusted(2), chained(3), root(4)  

docsBpi2CmtsCACertSource 1.3.6.1.2.1.126.1.2.5.2.1.6
This object indicates how the certificate reached the CMTS. Other(4) means that it originated from a source not identified above.
OBJECT-TYPE    
  INTEGER snmp(1), configurationFile(2), externalDatabase(3), other(4), authentInfo(5), compiledIntoCode(6)  

docsBpi2CmtsCACertStatus 1.3.6.1.2.1.126.1.2.5.2.1.7
The status of this conceptual row. An attempt to set writable columnar values while this row is active behaves as follows: - Sets to the object docsBpi2CmtsCACertTrust are allowed. - Sets to the object docsBpi2CmtsCACert will return an error of 'inconsistentValue'. A newly created entry cannot be set to active until the value of docsBpi2CmtsCACert is being set.
OBJECT-TYPE    
  RowStatus  

docsBpi2CmtsCACert 1.3.6.1.2.1.126.1.2.5.2.1.8
An X509 DER-encoded Certificate Authority certificate. To help identify certificates, either this object or docsBpi2CmtsCACertThumbprint must be returned by a CMTS for self-signed CA certificates. Note: The zero-length OCTET STRING must be returned, on reads, if the entire certificate is not retained in the CMTS.
OBJECT-TYPE    
  DocsX509ASN1DEREncodedCertificate  

docsBpi2CmtsCACertThumbprint 1.3.6.1.2.1.126.1.2.5.2.1.9
The SHA-1 hash of a CA certificate. To help identify certificates, either this object or docsBpi2CmtsCACert must be returned by a CMTS for self-signed CA certificates. Note: The zero-length OCTET STRING must be returned, on reads, if the CA certificate thumb print is not retained in the CMTS.
OBJECT-TYPE    
  OCTET STRING SIZE(20)  

docsBpi2CodeDownloadControl 1.3.6.1.2.1.126.1.4
OBJECT IDENTIFIER    

docsBpi2CodeDownloadStatusCode 1.3.6.1.2.1.126.1.4.1
The value indicates the result of the latest config file CVC verification, SNMP CVC verification, or code file verification.
OBJECT-TYPE    
  INTEGER configFileCvcVerified(1), configFileCvcRejected(2), snmpCvcVerified(3), snmpCvcRejected(4), codeFileVerified(5), codeFileRejected(6), other(7)  

docsBpi2CodeDownloadStatusString 1.3.6.1.2.1.126.1.4.2
The value of this object indicates the additional information to the status code. The value will include the error code and error description, which will be defined separately.
OBJECT-TYPE    
  SnmpAdminString  

docsBpi2CodeMfgOrgName 1.3.6.1.2.1.126.1.4.3
The value of this object is the device manufacturer's organizationName.
OBJECT-TYPE    
  SnmpAdminString  

docsBpi2CodeMfgCodeAccessStart 1.3.6.1.2.1.126.1.4.4
The value of this object is the device manufacturer's current codeAccessStart value. This value will always refer to Greenwich Mean Time (GMT), and the value format must contain TimeZone information (fields 8-10).
OBJECT-TYPE    
  DateAndTime SIZE(11)  

docsBpi2CodeMfgCvcAccessStart 1.3.6.1.2.1.126.1.4.5
The value of this object is the device manufacturer's current cvcAccessStart value. This value will always refer to Greenwich Mean Time (GMT), and the value format must contain TimeZone information (fields 8-10).
OBJECT-TYPE    
  DateAndTime SIZE(11)  

docsBpi2CodeCoSignerOrgName 1.3.6.1.2.1.126.1.4.6
The value of this object is the co-signer's organizationName. The value is a zero length string if the co-signer is not specified.
OBJECT-TYPE    
  SnmpAdminString  

docsBpi2CodeCoSignerCodeAccessStart 1.3.6.1.2.1.126.1.4.7
The value of this object is the co-signer's current codeAccessStart value. This value will always refer to Greenwich Mean Time (GMT), and the value format must contain TimeZone information (fields 8-10). If docsBpi2CodeCoSignerOrgName is a zero length string, the value of this object is meaningless.
OBJECT-TYPE    
  DateAndTime SIZE(11)  

docsBpi2CodeCoSignerCvcAccessStart 1.3.6.1.2.1.126.1.4.8
The value of this object is the co-signer's current cvcAccessStart value. This value will always refer to Greenwich Mean Time (GMT), and the value format must contain TimeZone information (fields 8-10). If docsBpi2CodeCoSignerOrgName is a zero length string, the value of this object is meaningless.
OBJECT-TYPE    
  DateAndTime SIZE(11)  

docsBpi2CodeCvcUpdate 1.3.6.1.2.1.126.1.4.9
Setting a CVC to this object triggers the device to verify the CVC and update the cvcAccessStart values. The content of this object is then discarded. If the device is not enabled to upgrade codefiles, or if the CVC verification fails, the CVC will be rejected. Reading this object always returns the zero-length OCTET STRING.
OBJECT-TYPE    
  DocsX509ASN1DEREncodedCertificate  

docsBpi2Conformance 1.3.6.1.2.1.126.2
OBJECT IDENTIFIER    

docsBpi2Compliances 1.3.6.1.2.1.126.2.1
OBJECT IDENTIFIER    

docsBpi2CmCompliance 1.3.6.1.2.1.126.2.1.1
This is the compliance statement for CMs that implement the DOCSIS Baseline Privacy Interface Plus.
MODULE-COMPLIANCE    

docsBpi2CmtsCompliance 1.3.6.1.2.1.126.2.1.2
This is the compliance statement for CMTSs that implement the DOCSIS Baseline Privacy Interface Plus.
MODULE-COMPLIANCE    

docsBpi2Groups 1.3.6.1.2.1.126.2.2
OBJECT IDENTIFIER    

docsBpi2CmGroup 1.3.6.1.2.1.126.2.2.1
This collection of objects provides CM BPI+ status and control.
OBJECT-GROUP    

docsBpi2CmtsGroup 1.3.6.1.2.1.126.2.2.2
This collection of objects provides CMTS BPI+ status and control.
OBJECT-GROUP    

docsBpi2CodeDownloadGroup 1.3.6.1.2.1.126.2.2.3
This collection of objects provides authenticated software download support.
OBJECT-GROUP    

Defined Objects

DocsX509ASN1DEREncodedCertificate  
An X509 digital certificate encoded as an ASN.1 DER object.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..4096)  

DocsSAId  
Security Association identifier (SAID).
TEXTUAL-CONVENTION    
  Integer32 1..16383  

DocsSAIdOrZero  
Security Association identifier (SAID). The value zero indicates that the SAID is yet to be determined.
TEXTUAL-CONVENTION    
  Unsigned32 0 | 1..16383  

DocsBpkmSAType  
The type of security association (SA). The values of the named-numbers are associated with the BPKM SA-Type attributes: 'primary' corresponds to code '1', 'static' to code '2', and 'dynamic' to code '3'. The 'none' value must only be used if the SA type has yet to be determined.
TEXTUAL-CONVENTION    
  INTEGER none(0), primary(1), static(2), dynamic(3)  

DocsBpkmDataEncryptAlg  
The list of data encryption algorithms defined for the DOCSIS interface in the BPKM cryptographic-suite parameter. The value 'none' indicates that the SAID being referenced has no data encryption.
TEXTUAL-CONVENTION    
  INTEGER none(0), des56CbcMode(1), des40CbcMode(2), t3Des128CbcMode(3), aes128CbcMode(4), aes256CbcMode(5)  

DocsBpkmDataAuthentAlg  
The list of data integrity algorithms defined for the DOCSIS interface in the BPKM cryptographic-suite parameter. The value 'none' indicates that no data integrity is used for the SAID being referenced.
TEXTUAL-CONVENTION    
  INTEGER none(0), hmacSha196(1)  

DocsBpi2CmBaseEntry  
SEQUENCE    
  TruthValue as docsBpi2CmPrivacyEnable  
  OCTET STRING as docsBpi2CmPublicKey  
  INTEGER as docsBpi2CmAuthState  
  Integer32 as docsBpi2CmAuthKeySequenceNumber  
  DateAndTime as docsBpi2CmAuthExpiresOld  
  DateAndTime as docsBpi2CmAuthExpiresNew  
  TruthValue as docsBpi2CmAuthReset  
  Integer32 as docsBpi2CmAuthGraceTime  
  Integer32 as docsBpi2CmTEKGraceTime  
  Integer32 as docsBpi2CmAuthWaitTimeout  
  Integer32 as docsBpi2CmReauthWaitTimeout  
  Integer32 as docsBpi2CmOpWaitTimeout  
  Integer32 as docsBpi2CmRekeyWaitTimeout  
  Integer32 as docsBpi2CmAuthRejectWaitTimeout  
  Integer32 as docsBpi2CmSAMapWaitTimeout  
  Integer32 as docsBpi2CmSAMapMaxRetries  
  Counter32 as docsBpi2CmAuthentInfos  
  Counter32 as docsBpi2CmAuthRequests  
  Counter32 as docsBpi2CmAuthReplies  
  Counter32 as docsBpi2CmAuthRejects  
  Counter32 as docsBpi2CmAuthInvalids  
  INTEGER as docsBpi2CmAuthRejectErrorCode  
  SnmpAdminString as docsBpi2CmAuthRejectErrorString  
  INTEGER as docsBpi2CmAuthInvalidErrorCode  
  SnmpAdminString as docsBpi2CmAuthInvalidErrorString  

DocsBpi2CmTEKEntry  
SEQUENCE    
  DocsSAId as docsBpi2CmTEKSAId  
  DocsBpkmSAType as docsBpi2CmTEKSAType  
  DocsBpkmDataEncryptAlg as docsBpi2CmTEKDataEncryptAlg  
  DocsBpkmDataAuthentAlg as docsBpi2CmTEKDataAuthentAlg  
  INTEGER as docsBpi2CmTEKState  
  Integer32 as docsBpi2CmTEKKeySequenceNumber  
  DateAndTime as docsBpi2CmTEKExpiresOld  
  DateAndTime as docsBpi2CmTEKExpiresNew  
  Counter32 as docsBpi2CmTEKKeyRequests  
  Counter32 as docsBpi2CmTEKKeyReplies  
  Counter32 as docsBpi2CmTEKKeyRejects  
  Counter32 as docsBpi2CmTEKInvalids  
  Counter32 as docsBpi2CmTEKAuthPends  
  INTEGER as docsBpi2CmTEKKeyRejectErrorCode  
  SnmpAdminString as docsBpi2CmTEKKeyRejectErrorString  
  INTEGER as docsBpi2CmTEKInvalidErrorCode  
  SnmpAdminString as docsBpi2CmTEKInvalidErrorString  

DocsBpi2CmIpMulticastMapEntry  
SEQUENCE    
  Unsigned32 as docsBpi2CmIpMulticastIndex  
  InetAddressType as docsBpi2CmIpMulticastAddressType  
  InetAddress as docsBpi2CmIpMulticastAddress  
  DocsSAIdOrZero as docsBpi2CmIpMulticastSAId  
  INTEGER as docsBpi2CmIpMulticastSAMapState  
  Counter32 as docsBpi2CmIpMulticastSAMapRequests  
  Counter32 as docsBpi2CmIpMulticastSAMapReplies  
  Counter32 as docsBpi2CmIpMulticastSAMapRejects  
  INTEGER as docsBpi2CmIpMulticastSAMapRejectErrorCode  
  SnmpAdminString as docsBpi2CmIpMulticastSAMapRejectErrorString  

DocsBpi2CmDeviceCertEntry  
SEQUENCE    
  DocsX509ASN1DEREncodedCertificate as docsBpi2CmDeviceCmCert  
  DocsX509ASN1DEREncodedCertificate as docsBpi2CmDeviceManufCert  

DocsBpi2CmCryptoSuiteEntry  
SEQUENCE    
  Unsigned32 as docsBpi2CmCryptoSuiteIndex  
  DocsBpkmDataEncryptAlg as docsBpi2CmCryptoSuiteDataEncryptAlg  
  DocsBpkmDataAuthentAlg as docsBpi2CmCryptoSuiteDataAuthentAlg  

DocsBpi2CmtsBaseEntry  
SEQUENCE    
  Integer32 as docsBpi2CmtsDefaultAuthLifetime  
  Integer32 as docsBpi2CmtsDefaultTEKLifetime  
  INTEGER as docsBpi2CmtsDefaultSelfSignedManufCertTrust  
  TruthValue as docsBpi2CmtsCheckCertValidityPeriods  
  Counter32 as docsBpi2CmtsAuthentInfos  
  Counter32 as docsBpi2CmtsAuthRequests  
  Counter32 as docsBpi2CmtsAuthReplies  
  Counter32 as docsBpi2CmtsAuthRejects  
  Counter32 as docsBpi2CmtsAuthInvalids  
  Counter32 as docsBpi2CmtsSAMapRequests  
  Counter32 as docsBpi2CmtsSAMapReplies  
  Counter32 as docsBpi2CmtsSAMapRejects  

DocsBpi2CmtsAuthEntry  
SEQUENCE    
  MacAddress as docsBpi2CmtsAuthCmMacAddress  
  INTEGER as docsBpi2CmtsAuthCmBpiVersion  
  OCTET STRING as docsBpi2CmtsAuthCmPublicKey  
  Integer32 as docsBpi2CmtsAuthCmKeySequenceNumber  
  DateAndTime as docsBpi2CmtsAuthCmExpiresOld  
  DateAndTime as docsBpi2CmtsAuthCmExpiresNew  
  Integer32 as docsBpi2CmtsAuthCmLifetime  
  INTEGER as docsBpi2CmtsAuthCmReset  
  Counter32 as docsBpi2CmtsAuthCmInfos  
  Counter32 as docsBpi2CmtsAuthCmRequests  
  Counter32 as docsBpi2CmtsAuthCmReplies  
  Counter32 as docsBpi2CmtsAuthCmRejects  
  Counter32 as docsBpi2CmtsAuthCmInvalids  
  INTEGER as docsBpi2CmtsAuthRejectErrorCode  
  SnmpAdminString as docsBpi2CmtsAuthRejectErrorString  
  INTEGER as docsBpi2CmtsAuthInvalidErrorCode  
  SnmpAdminString as docsBpi2CmtsAuthInvalidErrorString  
  DocsSAIdOrZero as docsBpi2CmtsAuthPrimarySAId  
  INTEGER as docsBpi2CmtsAuthBpkmCmCertValid  
  DocsX509ASN1DEREncodedCertificate as docsBpi2CmtsAuthBpkmCmCert  
  Unsigned32 as docsBpi2CmtsAuthCACertIndexPtr  

DocsBpi2CmtsTEKEntry  
SEQUENCE    
  DocsSAId as docsBpi2CmtsTEKSAId  
  DocsBpkmSAType as docsBpi2CmtsTEKSAType  
  DocsBpkmDataEncryptAlg as docsBpi2CmtsTEKDataEncryptAlg  
  DocsBpkmDataAuthentAlg as docsBpi2CmtsTEKDataAuthentAlg  
  Integer32 as docsBpi2CmtsTEKLifetime  
  Integer32 as docsBpi2CmtsTEKKeySequenceNumber  
  DateAndTime as docsBpi2CmtsTEKExpiresOld  
  DateAndTime as docsBpi2CmtsTEKExpiresNew  
  TruthValue as docsBpi2CmtsTEKReset  
  Counter32 as docsBpi2CmtsKeyRequests  
  Counter32 as docsBpi2CmtsKeyReplies  
  Counter32 as docsBpi2CmtsKeyRejects  
  Counter32 as docsBpi2CmtsTEKInvalids  
  INTEGER as docsBpi2CmtsKeyRejectErrorCode  
  SnmpAdminString as docsBpi2CmtsKeyRejectErrorString  
  INTEGER as docsBpi2CmtsTEKInvalidErrorCode  
  SnmpAdminString as docsBpi2CmtsTEKInvalidErrorString  

DocsBpi2CmtsIpMulticastMapEntry  
SEQUENCE    
  Unsigned32 as docsBpi2CmtsIpMulticastIndex  
  InetAddressType as docsBpi2CmtsIpMulticastAddressType  
  InetAddress as docsBpi2CmtsIpMulticastAddress  
  InetAddress as docsBpi2CmtsIpMulticastMask  
  DocsSAIdOrZero as docsBpi2CmtsIpMulticastSAId  
  DocsBpkmSAType as docsBpi2CmtsIpMulticastSAType  
  DocsBpkmDataEncryptAlg as docsBpi2CmtsIpMulticastDataEncryptAlg  
  DocsBpkmDataAuthentAlg as docsBpi2CmtsIpMulticastDataAuthentAlg  
  Counter32 as docsBpi2CmtsIpMulticastSAMapRequests  
  Counter32 as docsBpi2CmtsIpMulticastSAMapReplies  
  Counter32 as docsBpi2CmtsIpMulticastSAMapRejects  
  INTEGER as docsBpi2CmtsIpMulticastSAMapRejectErrorCode  
  SnmpAdminString as docsBpi2CmtsIpMulticastSAMapRejectErrorString  
  RowStatus as docsBpi2CmtsIpMulticastMapControl  
  StorageType as docsBpi2CmtsIpMulticastMapStorageType  

DocsBpi2CmtsMulticastAuthEntry  
SEQUENCE    
  DocsSAId as docsBpi2CmtsMulticastAuthSAId  
  MacAddress as docsBpi2CmtsMulticastAuthCmMacAddress  
  RowStatus as docsBpi2CmtsMulticastAuthControl  

DocsBpi2CmtsProvisionedCmCertEntry  
SEQUENCE    
  MacAddress as docsBpi2CmtsProvisionedCmCertMacAddress  
  INTEGER as docsBpi2CmtsProvisionedCmCertTrust  
  INTEGER as docsBpi2CmtsProvisionedCmCertSource  
  RowStatus as docsBpi2CmtsProvisionedCmCertStatus  
  DocsX509ASN1DEREncodedCertificate as docsBpi2CmtsProvisionedCmCert  

DocsBpi2CmtsCACertEntry  
SEQUENCE    
  Unsigned32 as docsBpi2CmtsCACertIndex  
  SnmpAdminString as docsBpi2CmtsCACertSubject  
  SnmpAdminString as docsBpi2CmtsCACertIssuer  
  OCTET STRING as docsBpi2CmtsCACertSerialNumber  
  INTEGER as docsBpi2CmtsCACertTrust  
  INTEGER as docsBpi2CmtsCACertSource  
  RowStatus as docsBpi2CmtsCACertStatus  
  DocsX509ASN1DEREncodedCertificate as docsBpi2CmtsCACert  
  OCTET STRING as docsBpi2CmtsCACertThumbprint