
| RFC1155-SMI | RFC1213-MIB | RFC-1212 |
| enterprises | experimental | IpAddress |
| TimeTicks | Gauge | Counter |
| DisplayString | OBJECT-TYPE |
| usr | 1.3.6.1.4.1.429 | ||
| OBJECT IDENTIFIER | |||
| nas | 1.3.6.1.4.1.429.1 | ||
| OBJECT IDENTIFIER | |||
| dt1 | 1.3.6.1.4.1.429.1.3 | ||
| OBJECT IDENTIFIER | |||
| dt1Id | 1.3.6.1.4.1.429.1.3.1 | ||
| OBJECT IDENTIFIER | |||
| dt1IdTable | 1.3.6.1.4.1.429.1.3.1.1 | ||
| A table that contains information that identifies the hardware and software that make up the specified dual T1 card. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dt1IdEntry | |||
| dt1IdEntry | 1.3.6.1.4.1.429.1.3.1.1.1 | ||
| There is one entry in this table for every dual T1 card in the chassis. | |||
| OBJECT-TYPE | |||
| Dt1IdEntry | |||
| dt1IdIndex | 1.3.6.1.4.1.429.1.3.1.1.1.1 | ||
| An index that uniquely identifies the dual T1 card for which this row in the table pertains. The value of this index matches the value of the index for the corresponding entity in the entity table of the chassis MIB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1IdHardwareSerNum | 1.3.6.1.4.1.429.1.3.1.1.1.2 | ||
| The dual T1 card's hardware serial number as stored in EEPROM. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..24) | ||
| dt1IdHardwareRev | 1.3.6.1.4.1.429.1.3.1.1.1.3 | ||
| The hardware revision of the specified dual T1 card as stored in its EEPROM. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..24) | ||
| dt1IdSoftwareRev | 1.3.6.1.4.1.429.1.3.1.1.1.4 | ||
| The revision of the software being executed in the specified dual T1 card. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..24) | ||
| dt1Cfg | 1.3.6.1.4.1.429.1.3.2 | ||
| OBJECT IDENTIFIER | |||
| dt1CfgTable | 1.3.6.1.4.1.429.1.3.2.1 | ||
| The Dual T1 Card Configuration Table contains an entry for each of the manageable Dual T1 Cards in the chassis. It contains objects that reflect the current configuration of parameters that affect the operation of all the entities that reside on the given card. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dt1CfgEntry | |||
| dt1CfgEntry | 1.3.6.1.4.1.429.1.3.2.1.1 | ||
| There is one Dual T1 Card Configuration table entry per Dual T1 Card in the chassis. | |||
| OBJECT-TYPE | |||
| Dt1CfgEntry | |||
| dt1CfgIndex | 1.3.6.1.4.1.429.1.3.2.1.1.1 | ||
| A unique value for each Dual T1 Card in the chassis. The value of dt1CfgIndex matches the value of the index for the corresponding Dual T1 Card entity in the entity table of the chassis MIB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1CfgSpanATmgSrcPrio | 1.3.6.1.4.1.429.1.3.2.1.1.2 | ||
| Identifies the priority at which the clock recovered from span line A is to be used as this Dual T1 Card's transmit timing source. | |||
| OBJECT-TYPE | |||
| INTEGER | notAllowed(1), high(2), mediumHigh(3), medium(4), low(5) | ||
| dt1CfgSpanBTmgSrcPrio | 1.3.6.1.4.1.429.1.3.2.1.1.3 | ||
| Identifies the priority at which the clock recovered from span line B is to be used as this Dual T1 Card's transmit timing source. | |||
| OBJECT-TYPE | |||
| INTEGER | notAllowed(1), high(2), mediumHigh(3), medium(4), low(5) | ||
| dt1CfgInternTmgSrcPrio | 1.3.6.1.4.1.429.1.3.2.1.1.4 | ||
| Identifies the priority at which this Dual T1 Card's internal clock is to be used as the transmit timing source. | |||
| OBJECT-TYPE | |||
| INTEGER | notAllowed(1), high(2), mediumHigh(3), medium(4), low(5) | ||
| dt1CfgTdmBusTmgSrcPrio | 1.3.6.1.4.1.429.1.3.2.1.1.5 | ||
| Identifies the priority at which the clock currently on the TDM bus is to be used as this Dual T1 Card's transmit timing source. | |||
| OBJECT-TYPE | |||
| INTEGER | notAllowed(1), high(2), mediumHigh(3), medium(4), low(5) | ||
| dt1CfgIdleDiscPatt | 1.3.6.1.4.1.429.1.3.2.1.1.6 | ||
| Idle disconnect pattern sent to the modems. Normal values: USA = 1, international = 84. Default = 1. Configure the modems identically. Consult the help screen, user manual or US Robotics before changing. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| dt1CfgNumT1TypeNacs | 1.3.6.1.4.1.429.1.3.2.1.1.7 | ||
| The number of T1 and/or T1/E1-PRI NACs in the chassis. Default=multiple(3). | |||
| OBJECT-TYPE | |||
| INTEGER | notSupported(1), single(2), multiple(3) | ||
| dt1CfgCallEventFilter | 1.3.6.1.4.1.429.1.3.2.1.1.8 | ||
| This objects provides a means to filter the types of call event traps generated. It specifies the class of calls to filter out. Default = filterOutSuccess(4). | |||
| OBJECT-TYPE | |||
| INTEGER | notSupported(1), filterOutNone(2), filterOutBoth(3), filterOutSuccess(4), filterOutFailure(5) | ||
| dt1CfgSetDs0OutofService | 1.3.6.1.4.1.429.1.3.2.1.1.9 | ||
| This object determines to put DS0s out of service upon removal Quad Modem NAC when fixed modem routing method is engaged. Default = disable(2). | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| dt1CfgWirelessMode | 1.3.6.1.4.1.429.1.3.2.1.1.10 | ||
| This object will configure the wireless mode of operations of the T1 at power up. Default = normal(1). | |||
| OBJECT-TYPE | |||
| INTEGER | normal(1), wireless(2) | ||
| dt1Stat | 1.3.6.1.4.1.429.1.3.3 | ||
| OBJECT IDENTIFIER | |||
| dt1StatTable | 1.3.6.1.4.1.429.1.3.3.1 | ||
| The Dual T1 Card Status table contains an entry for each of the manageable Dual T1 Cards in the chassis. It contains objects that reflect the current card specific status. Status values dynamically change during calls, and they are read-only. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dt1StatEntry | |||
| dt1StatEntry | 1.3.6.1.4.1.429.1.3.3.1.1 | ||
| There is one Dual T1 Card Status entry per Dual T1 Card in the chassis. | |||
| OBJECT-TYPE | |||
| Dt1StatEntry | |||
| dt1StatIndex | 1.3.6.1.4.1.429.1.3.3.1.1.1 | ||
| A unique value for each Dual T1 Card in the chassis. The value of dt1StatusIndex matches the value of the index for the corresponding Dual T1 Card's entry in the entity table of the chassis MIB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1StatCurrentTmgSrc | 1.3.6.1.4.1.429.1.3.3.1.1.2 | ||
| Based on the availability of the various timing sources and the current settings of the priorities at which they are to be used, the Dual T1 Card will select the current transmit timing source. This object will indicate the current timing source being used for transmit timing. | |||
| OBJECT-TYPE | |||
| INTEGER | spanLineA(1), spanLineB(2), internalClock(3), tdmBusClock(4) | ||
| dt1StatSelfTest | 1.3.6.1.4.1.429.1.3.3.1.1.3 | ||
| This object contains the result of the last self test command requested from the command table. It includes both destructive and non destructive results. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1StatUpTime | 1.3.6.1.4.1.429.1.3.3.1.1.4 | ||
| This object contains the uptime of the NAC | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1StatCallEventCode | 1.3.6.1.4.1.429.1.3.3.1.1.5 | ||
| This object contains the definition of the call event codes sent in the call event trap. | |||
| OBJECT-TYPE | |||
| INTEGER | notSupported(1), setup(2), usrSetup(3), telcoDisconnect(4), usrDisconnect(5), noFreeModem(6), modemsNotAllowed(7), modemsRejectCall(8), modemSetupTimeout(9), noFreeIGW(10), igwRejectCall(11), igwSetupTimeout(12), noFreeTdmts(13), bcReject(14), ieReject(15), chidReject(16), progReject(17), callingPartyReject(18), calledPartyReject(19), blocked(20), analogBlocked(21), digitalBlocked(22), outOfService(23), busy(24), congestion(25), protocolError(26), noFreeBchannel(27), inOutCallCollision(28), inCallArrival(29), outCallArrival(30), inCallConnect(31), outCallConnect(32) | ||
| dt1StatCallEventQ931Value | 1.3.6.1.4.1.429.1.3.3.1.1.6 | ||
| This object contains the Q931 Call Reference Value sent in the call event trap. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1Cmd | 1.3.6.1.4.1.429.1.3.4 | ||
| OBJECT IDENTIFIER | |||
| dt1CmdTable | 1.3.6.1.4.1.429.1.3.4.1 | ||
| The Dual T1 Card Command table contains an entry for each of the manageable Dual T1 Cards in the chassis. It provides a means through which to take specific actions on one or more Dual T1 cards in the NAS chassis. The number of entries in this table is given by the value of dt1IdNumber. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dt1CmdEntry | |||
| dt1CmdEntry | 1.3.6.1.4.1.429.1.3.4.1.1 | ||
| There is one Dual T1 Card Command entry per Dual T1 Card in the chassis. | |||
| OBJECT-TYPE | |||
| Dt1CmdEntry | |||
| dt1CmdIndex | 1.3.6.1.4.1.429.1.3.4.1.1.1 | ||
| A unique value for each Dual T1 Card in the chassis. The value of this object matches the value of the index of the corresponding Dual T1 Card's entry in the entity table of the chassis MIB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1CmdMgtStationId | 1.3.6.1.4.1.429.1.3.4.1.1.2 | ||
| This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with dt1CmdReqId and dt1CmdResult to detect interference from other MSs. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..8) | ||
| dt1CmdReqId | 1.3.6.1.4.1.429.1.3.4.1.1.3 | ||
| This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this Dual T1 Card. If the request-id is unknown or undefined, this object contains the value zero. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1CmdFunction | 1.3.6.1.4.1.429.1.3.4.1.1.4 | ||
| This object contains a value which describes the command which is being invoked. | |||
| OBJECT-TYPE | |||
| INTEGER | noCommand(1), saveToNVRAM(2), restoreFromNVRAM(3), restoreFromDefault(4), nonDisruptSelfTest(5), disruptSelfTest(6), softwareReset(7), resetToHiPrioTimingSrc(8), forceTdmBusMastership(9), enterSpanToSpanLoopback(10), exitSpanToSpanLoopback(11), restoreDefaultUIPassword(12) | ||
| dt1CmdForce | 1.3.6.1.4.1.429.1.3.4.1.1.5 | ||
| In some cases, the Dual T1 Card may be in a state such that certain commands could adversely affect connections. In such cases, a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings, this object can be set to force in a subsequent issue of the command to cause the command to be carried out regardless of its potentially hazzardous effects. | |||
| OBJECT-TYPE | |||
| INTEGER | force(1), noForce(2) | ||
| dt1CmdParam | 1.3.6.1.4.1.429.1.3.4.1.1.6 | ||
| This object contains parameters that are specific to the particular command being issued. In some cases, there will be no aditional parameters required. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..24) | ||
| dt1CmdResult | 1.3.6.1.4.1.429.1.3.4.1.1.7 | ||
| This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7) | ||
| dt1CmdCode | 1.3.6.1.4.1.429.1.3.4.1.1.8 | ||
| The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful. In the case of tests, a bit mapped result of each of the sub-tests performed can be found in the status table. | |||
| OBJECT-TYPE | |||
| INTEGER | noError(1), unable(2), unrecognizedCommand(6), slotEmpty(8), noResponse(12), unsupportedCommand(20), deviceDisabled(22), testFailed(25), userInterfaceActive(58), pendingSoftwareDownload(73) | ||
| dt1TrapEnaTable | 1.3.6.1.4.1.429.1.3.5 | ||
| Table containing objects to enable traps on the Dual T1 Cards in the chassis. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dt1TrapEnaEntry | |||
| dt1TrapEnaEntry | 1.3.6.1.4.1.429.1.3.5.1 | ||
| There is one entry for each Dual T1 Card in the chassis. | |||
| OBJECT-TYPE | |||
| Dt1TrapEnaEntry | |||
| dt1TrapEnaIndex | 1.3.6.1.4.1.429.1.3.5.1.1 | ||
| A unique index identifying the Dual T1 Card to which the trap enable objects pertain. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dt1TrapEnaTxTmgSrcSwitch | 1.3.6.1.4.1.429.1.3.5.1.2 | ||
| An object which enables the SNMP proxy agent to generate a trap upon detection of the Dual T1 Card switching to an alternate transmit timing source. Default = disableAll(2). | |||
| OBJECT-TYPE | |||
| INTEGER | enableTrap(1), disableAll(2), enableLog(3), enableAll(4) | ||
| dt1TrapEnaCallEvent | 1.3.6.1.4.1.429.1.3.5.1.3 | ||
| This object enables the generation of an SNMP trap to track calls entering and exiting the NAC. Default = disableAll(2). | |||
| OBJECT-TYPE | |||
| INTEGER | enableTrap(1), disableAll(2), enableLog(3), enableAll(4) | ||
| dt1TrapEnaCallArriveEvent | 1.3.6.1.4.1.429.1.3.5.1.4 | ||
| This object enables the generation of an SNMP trap to track call arrivals the NAC. Default = disableAll(2). | |||
| OBJECT-TYPE | |||
| INTEGER | enableTrap(1), disableAll(2), enableLog(3), enableAll(4) | ||
| dt1TrapEnaCallConnEvent | 1.3.6.1.4.1.429.1.3.5.1.5 | ||
| This object enables the generation of an SNMP trap to track call connects. Default = disableAll(2). | |||
| OBJECT-TYPE | |||
| INTEGER | enableTrap(1), disableAll(2), enableLog(3), enableAll(4) | ||
| dt1TrapEnaCallTermEvent | 1.3.6.1.4.1.429.1.3.5.1.6 | ||
| This object enables the generation of an SNMP trap to track normal call terminations. Default = disableAll(2). | |||
| OBJECT-TYPE | |||
| INTEGER | enableTrap(1), disableAll(2), enableLog(3), enableAll(4) | ||
| dt1TrapEnaCallFailEvent | 1.3.6.1.4.1.429.1.3.5.1.7 | ||
| This object enables the generation of an SNMP trap to track failed call terminations. Default = disableAll(2). | |||
| OBJECT-TYPE | |||
| INTEGER | enableTrap(1), disableAll(2), enableLog(3), enableAll(4) | ||
| Dt1IdEntry | |||
| SEQUENCE | |||
| INTEGER as dt1IdIndex | |||
| DisplayString as dt1IdHardwareSerNum | |||
| DisplayString as dt1IdHardwareRev | |||
| DisplayString as dt1IdSoftwareRev | |||
| Dt1CfgEntry | |||
| SEQUENCE | |||
| INTEGER as dt1CfgIndex | |||
| INTEGER as dt1CfgSpanATmgSrcPrio | |||
| INTEGER as dt1CfgSpanBTmgSrcPrio | |||
| INTEGER as dt1CfgInternTmgSrcPrio | |||
| INTEGER as dt1CfgTdmBusTmgSrcPrio | |||
| INTEGER as dt1CfgIdleDiscPatt | |||
| INTEGER as dt1CfgNumT1TypeNacs | |||
| INTEGER as dt1CfgCallEventFilter | |||
| INTEGER as dt1CfgSetDs0OutofService | |||
| INTEGER as dt1CfgWirelessMode | |||
| Dt1StatEntry | |||
| SEQUENCE | |||
| INTEGER as dt1StatIndex | |||
| INTEGER as dt1StatCurrentTmgSrc | |||
| INTEGER as dt1StatSelfTest | |||
| INTEGER as dt1StatUpTime | |||
| INTEGER as dt1StatCallEventCode | |||
| INTEGER as dt1StatCallEventQ931Value | |||
| Dt1CmdEntry | |||
| SEQUENCE | |||
| INTEGER as dt1CmdIndex | |||
| OCTET STRING as dt1CmdMgtStationId | |||
| INTEGER as dt1CmdReqId | |||
| INTEGER as dt1CmdFunction | |||
| INTEGER as dt1CmdForce | |||
| OCTET STRING as dt1CmdParam | |||
| INTEGER as dt1CmdResult | |||
| INTEGER as dt1CmdCode | |||
| Dt1TrapEnaEntry | |||
| SEQUENCE | |||
| INTEGER as dt1TrapEnaIndex | |||
| INTEGER as dt1TrapEnaTxTmgSrcSwitch | |||
| INTEGER as dt1TrapEnaCallEvent | |||
| INTEGER as dt1TrapEnaCallArriveEvent | |||
| INTEGER as dt1TrapEnaCallConnEvent | |||
| INTEGER as dt1TrapEnaCallTermEvent | |||
| INTEGER as dt1TrapEnaCallFailEvent | |||