EDB-snmp

File: EDB-snmp.mib (35136 bytes)

Imported modules

RFC-1215 SNMPv2-TC RFC1155-SMI
RFC1213-MIB RFC-1212

Imported symbols

TRAP-TYPE DisplayString mgmt
NetworkAddress IpAddress Counter
Gauge TimeTicks internet
PhysAddress OBJECT-TYPE

Defined Objects

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

fibronics 1.3.6.1.4.1.22
OBJECT IDENTIFIER    

trap 1.3.6.1.4.1.22.3
OBJECT IDENTIFIER    

traprun 1.3.6.1.4.1.22.3.1
OBJECT IDENTIFIER    

rTrapAddrTbl 1.3.6.1.4.1.22.3.1.1
Table of managers to which traps must be sent. Up to 10 entries in table
OBJECT-TYPE    
  SEQUENCE OF  
    RTrapAddrEntry

rTrapAddrEntry 1.3.6.1.4.1.22.3.1.1.1
OBJECT-TYPE    
  RTrapAddrEntry  

rTrapAddrAddr 1.3.6.1.4.1.22.3.1.1.1.1
IP address of entity requesting event notification
OBJECT-TYPE    
  IpAddress  

rTrapAddrComm 1.3.6.1.4.1.22.3.1.1.1.2
Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  OCTET STRING  

rTrapAddrVer 1.3.6.1.4.1.22.3.1.1.1.3
Version number supported by destination node
OBJECT-TYPE    
  INTEGER  

rTrapAddrType 1.3.6.1.4.1.22.3.1.1.1.4
Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - Enterprise Traps other than fmDiagGenericTrap
OBJECT-TYPE    
  OCTET STRING  

rTrapAddrState 1.3.6.1.4.1.22.3.1.1.1.5
Determines status of this entry
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

rTrapAddrFlag 1.3.6.1.4.1.22.3.1.1.1.6
If the entry is fixed, it can not be deleted because of aging
OBJECT-TYPE    
  INTEGER fixed(0), removable(1)  

rTrapAddrAge 1.3.6.1.4.1.22.3.1.1.1.7
Aging time of the entry (in sec)
OBJECT-TYPE    
  INTEGER  

rTrapLearning 1.3.6.1.4.1.22.3.1.2
Learn the addresses of the managers automatically.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

rTrapAging 1.3.6.1.4.1.22.3.1.3
Time in sec. until we erase a trap entry
OBJECT-TYPE    
  INTEGER  

traperm 1.3.6.1.4.1.22.3.2
OBJECT IDENTIFIER    

pTrapAddrTbl 1.3.6.1.4.1.22.3.2.1
Table of managers to which traps must be sent. Up to 10 entries in table
OBJECT-TYPE    
  SEQUENCE OF  
    PTrapAddrEntry

pTrapAddrEntry 1.3.6.1.4.1.22.3.2.1.1
OBJECT-TYPE    
  PTrapAddrEntry  

pTrapAddrAddr 1.3.6.1.4.1.22.3.2.1.1.1
IP address of entity requesting event notification
OBJECT-TYPE    
  IpAddress  

pTrapAddrComm 1.3.6.1.4.1.22.3.2.1.1.2
Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  OCTET STRING  

pTrapAddrVer 1.3.6.1.4.1.22.3.2.1.1.3
Version number supported by destination node
OBJECT-TYPE    
  INTEGER  

pTrapAddrType 1.3.6.1.4.1.22.3.2.1.1.4
Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - all Enterprise Traps other than fmDiagGenericTrap
OBJECT-TYPE    
  OCTET STRING  

pTrapAddrState 1.3.6.1.4.1.22.3.2.1.1.5
Determines status of this entry
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

pTrapLearning 1.3.6.1.4.1.22.3.2.2
Learn the addresses of the managers automatically.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pTrapAging 1.3.6.1.4.1.22.3.2.3
Time in sec. until we erase a trap entry
OBJECT-TYPE    
  INTEGER  

trapvar 1.3.6.1.4.1.22.3.3
OBJECT IDENTIFIER    

fm800 1.3.6.1.4.1.22.51
OBJECT IDENTIFIER    

fmsystem 1.3.6.1.4.1.22.51.1
OBJECT IDENTIFIER    

fmPowerSupplyFail 1.3.6.1.4.1.22.51.1
This trap message is generated as soon as one of the power supply has failed
TRAP-TYPE    
  fmSystemPSOper  

fmsystemrun 1.3.6.1.4.1.22.51.1.1
OBJECT IDENTIFIER    

fmSystemPSAdmin 1.3.6.1.4.1.22.51.1.1.1
Changes power supply to primary or secondary. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  INTEGER primary-power(1), secondary-power(2)  

fmSystemPSOper 1.3.6.1.4.1.22.51.1.1.2
Which power supply active
OBJECT-TYPE    
  INTEGER primary-power(1), secondary-power(2)  

fmSystemPSCfg 1.3.6.1.4.1.22.51.1.1.3
Configuration of power supply
OBJECT-TYPE    
  INTEGER primary-power(1), secondary-power(2), primary-and-secondary-power(3)  

fmSystemReset 1.3.6.1.4.1.22.51.1.1.4
Resetting the CARD. When reading the instance of this object the value has no meaning. cold reset is performed with selftest , while warm start is performed without selftest
OBJECT-TYPE    
  INTEGER cold-reset(0), warm-reset(1), power-up(2), meaning-less-value(127)  

fmSystemSelfTestLevel 1.3.6.1.4.1.22.51.1.1.5
Type of self test to be executed upon cold-reset
OBJECT-TYPE    
  INTEGER none(0), partial(1), full(2), extended(3)  

fmSystemVersion 1.3.6.1.4.1.22.51.1.1.6
Version of the station. The version includes station type, hardware version and software version. The string can include CR and LF
OBJECT-TYPE    
  OCTET STRING  

fmSystemIpAddr 1.3.6.1.4.1.22.51.1.1.7
IP address of the agent
OBJECT-TYPE    
  IpAddress  

fmSystemIPNetMask 1.3.6.1.4.1.22.51.1.1.8
IP Network Mask
OBJECT-TYPE    
  IpAddress  

fmSystemIPDefGway 1.3.6.1.4.1.22.51.1.1.9
Default Gateway Address
OBJECT-TYPE    
  IpAddress  

fmSystemFileServer 1.3.6.1.4.1.22.51.1.1.10
IP address to which a TFTP for boot is sent.
OBJECT-TYPE    
  IpAddress  

fmSystemBootFile 1.3.6.1.4.1.22.51.1.1.11
Path and file name that is sent as a TFTP request
OBJECT-TYPE    
  OCTET STRING  

fmSystemBootMode 1.3.6.1.4.1.22.51.1.1.12
Method for booting
OBJECT-TYPE    
  INTEGER internal-memory(1), bootp(2)  

fmSystemDownLoad 1.3.6.1.4.1.22.51.1.1.13
Downloading the EDB. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  INTEGER download(1), meaning-less-value(127)  

fmSystemSlipIpAddr 1.3.6.1.4.1.22.51.1.1.14
SLIP IP address. This is object is available only when slip interface exist
OBJECT-TYPE    
  IpAddress  

fmSystemSlipIPNetMask 1.3.6.1.4.1.22.51.1.1.15
SLIP IP Network Mask This is object is available only when slip interface exist
OBJECT-TYPE    
  IpAddress  

fmSystemSlipBaudRate 1.3.6.1.4.1.22.51.1.1.16
SLIP Baud rate This is object is available only when slip interface exist
OBJECT-TYPE    
  INTEGER baud1200(0), baud2400(1), baud4800(2), baud9600(3), baud19200(4), baud38400(5)  

fmSystemSlipParity 1.3.6.1.4.1.22.51.1.1.17
SLIP Parity This is object is available only when slip interface exist
OBJECT-TYPE    
  INTEGER none(0), odd(1), even(2)  

fmSystemSlipStopBits 1.3.6.1.4.1.22.51.1.1.18
SLIP Stop Bits This is object is available only when slip interface exist
OBJECT-TYPE    
  INTEGER one(0), two(1)  

fmsystemperm 1.3.6.1.4.1.22.51.1.2
OBJECT IDENTIFIER    

pfmSystemIpAddr 1.3.6.1.4.1.22.51.1.2.7
IP address of the agent
OBJECT-TYPE    
  IpAddress  

pfmSystemIPNetMask 1.3.6.1.4.1.22.51.1.2.8
IP Network Mask
OBJECT-TYPE    
  IpAddress  

pfmSystemIPDefGway 1.3.6.1.4.1.22.51.1.2.9
Default Gateway Address
OBJECT-TYPE    
  IpAddress  

pfmSystemFileServer 1.3.6.1.4.1.22.51.1.2.10
IP address to which a TFTP for boot is sent.
OBJECT-TYPE    
  IpAddress  

pfmSystemBootFile 1.3.6.1.4.1.22.51.1.2.11
Path and file name that is sent as a TFTP request
OBJECT-TYPE    
  OCTET STRING  

pfmSystemBootMode 1.3.6.1.4.1.22.51.1.2.12
Method for booting
OBJECT-TYPE    
  INTEGER internal-memory(1), bootp(2)  

pfmSystemReadCommunity 1.3.6.1.4.1.22.51.1.2.13
Community string for reading When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  OCTET STRING  

pfmSystemWriteCommunity 1.3.6.1.4.1.22.51.1.2.14
Community string for writing When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  OCTET STRING  

pfmSystemSlipIpAddr 1.3.6.1.4.1.22.51.1.2.15
SLIP IP address This is object is available only when slip interface exist
OBJECT-TYPE    
  IpAddress  

pfmSystemSlipIPNetMask 1.3.6.1.4.1.22.51.1.2.16
SLIP IP Network Mask This is object is available only when slip interface exist
OBJECT-TYPE    
  IpAddress  

pfmSystemSlipBaudRate 1.3.6.1.4.1.22.51.1.2.17
SLIP Baud rate This is object is available only when slip interface exist
OBJECT-TYPE    
  INTEGER baud1200(0), baud2400(1), baud4800(2), baud9600(3), baud19200(4), baud38400(5)  

pfmSystemSlipParity 1.3.6.1.4.1.22.51.1.2.18
SLIP Parity This is object is available only when slip interface exist
OBJECT-TYPE    
  INTEGER none(0), odd(1), even(2)  

pfmSystemSlipStopBits 1.3.6.1.4.1.22.51.1.2.19
SLIP Stop Bits This is object is available only when slip interface exist
OBJECT-TYPE    
  INTEGER one(0), two(1)  

fmslot 1.3.6.1.4.1.22.51.2
OBJECT IDENTIFIER    

fmPrimaryPowerSupplyOK 1.3.6.1.4.1.22.51.2
This trap is issued when primary power supply return to work
TRAP-TYPE    
  fmSystemPSOper  

fmSlotMasterClear 1.3.6.1.4.1.22.51.2.1
Upon writing, performs a master clear command on all the slots. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  INTEGER  

fmSlotTable 1.3.6.1.4.1.22.51.2.2
OBJECT-TYPE    
  SEQUENCE OF  
    FmSlotEntry

fmSlotEntry 1.3.6.1.4.1.22.51.2.2.1
OBJECT-TYPE    
  FmSlotEntry  

fmSlotIndex 1.3.6.1.4.1.22.51.2.2.1.1
Slot Number
OBJECT-TYPE    
  INTEGER  

fmSlotID 1.3.6.1.4.1.22.51.2.2.1.2
ID of the card in the slot
OBJECT-TYPE    
  INTEGER unconfig(0), empty(1), cc832-10(2), cc832-12(3), cc832-20(4), cc832-31(5), cc832-32(6), cc832-41(7), cc832-42(8), cc832-44(9), cc832-46A(10), cc892-832(65537), lc322(65540), cc892-201(65544), cc892-202(65545), cc892-214(65548), cc892-321(65552), cc892-46B(65553), cc892-301(65560), cc892-303(65562), cc892-308(65563), cc892-233(65568), cc892-260(65576), cc892-427(65580), sw892-11X(65584), cc892-432(65588), cc892-420(65589), cc892-421(65591), cc892-422(65590), cc892-401(65592), cc892-240(65594), cc892-241(65595), cc892-211(65550), cc892-212(65551), lc303(65566), lc308(65567), lc312(65578), cc832-10-ID(65541), cc832-12-ID(65542), cc832-20-ID(65543), cc832-41-ID(65557), cc832-42-ID(65558), cc832-44-ID(65559), general-smartcard(131072), lc308-129(131073), lc303-129(131075), lc312-129(131077)  

fmSlotDescr 1.3.6.1.4.1.22.51.2.2.1.3
Ascii string. Description of the card
OBJECT-TYPE    
  OCTET STRING  

fmSlotInfo 1.3.6.1.4.1.22.51.2.2.1.4
User general info for the slot. Can be the use of that slot, its location etc...
OBJECT-TYPE    
  OCTET STRING  

fmSlotStatus 1.3.6.1.4.1.22.51.2.2.1.5
8 bytes. 60 status bits of the card. For more information about the meaning of the status, read the specific user manual of each card. The channel leds are encoded into 2 bytes.
OBJECT-TYPE    
  OCTET STRING  

fmSlotPrevStatus 1.3.6.1.4.1.22.51.2.2.1.6
8 bytes. Previous 60 status bits of the card. This object id is used mainly for traps (see Card Trap)
OBJECT-TYPE    
  OCTET STRING  

fmSlotRLBSet 1.3.6.1.4.1.22.51.2.2.1.7
Argument: 1 - 4. Perform a RLB set operation on the channel passed as argument. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  INTEGER  

fmSlotRLBClear 1.3.6.1.4.1.22.51.2.2.1.8
Argument: 1 - 4. Perform a RLB clear operation on the channel passed as argument. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  INTEGER  

fmSlotExpCode 1.3.6.1.4.1.22.51.2.2.1.9
Perform an expanded command on the slot. For expanded codes, see specific card user manual. When reading the instance of this object the value has no meaning. Extended command codes for NDS cards ------------------------------------ 1. CC892.303 (Ethernet) Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 13 03/03 Attach Port 13 04/04 Detach Port 01 05/05 Attach Port 01 06/06 Detach Port 02 07/07 Attach Port 02 08/08 Detach Port 03 09/09 Attach Port 03 10/0A Detach Port 04 11/0B Attach Port 04 12/0C Detach Port 05 13/0D Attach Port 05 14/0E Detach Port 06 15/0F Attach Port 06 16/10 Detach Port 07 17/11 Attach Port 07 18/12 Detach Port 08 19/13 Attach Port 08 20/14 Detach Port 09 21/15 Attach Port 09 22/16 Detach Port 10 23/17 Attach Port 10 24/18 Detach Port 11 25/19 Attach Port 11 26/1A Detach Port 12 27/1B Attach Port 12 28/1C Detach All Ports 29/1D Attach All Ports 30/1E Reset Card 31/1F Link Select ====================================================== 2. CC892.308 (Ethernet) Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 01 03/03 Attach Port 01 04/04 Detach Port 02 05/05 Attach Port 02 06/06 Detach Port 03 07/07 Attach Port 03 08/08 Detach Port 04 09/09 Attach Port 04 10/0A Detach Port 05 11/0B Attach Port 05 12/0C Detach Port 06 13/0D Attach Port 06 14/0E Detach Port 07 15/0F Attach Port 07 16/10 Detach Port 08 17/11 Attach Port 08 ... 28/1C Detach All Ports 29/1D Attach All Ports 30/1E Reset Card 31/1F Link Select ================================================ 3. CC892.322 (Token-ring) Module 323 ---------- Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 01 03/03 Attach Port 01 04/04 Detach Port 02 05/05 Attach Port 02 06/06 Detach Port 03 07/07 Attach Port 03 08/08 Detach Port 04 09/09 Attach Port 04 10/0A Detach Port 05 11/0B Attach Port 05 12/0C Detach Port 06 13/0D Attach Port 06 18/12 Detach Port 07 19/13 Attach Port 07 20/14 Detach Port 08 21/15 Attach Port 08 22/16 Detach Port 19 23/17 Attach Port 19 24/18 Detach Port 10 25/19 Attach Port 10 26/1A Detach Port 11 27/1B Attach Port 11 28/1C Detach Port 12 29/1D Attach Port 12 30/1E Reset Card 34/22 Detach Port 13 35/23 Attach Port 13 36/24 Detach Port 14 37/25 Attach Port 14 38/26 Detach Port 15 39/27 Attach Port 15 40/28 Detach Port 16 41/29 Attach Port 16 42/2A Detach Port 17 43/2B Attach Port 17 44/2C Detach Port 18 45/2D Attach Port 18 50/32 Detach Port 19 51/33 Attach Port 19 52/34 Detach Port 20 53/35 Attach Port 20 54/36 Detach Port 21 55/37 Attach Port 21 56/38 Detach Port 22 57/39 Attach Port 22 58/3A Detach Port 23 59/3B Attach Port 23 60/3C Detach Port 24 61/3D Attach Port 24 77/4D Detach All Ports 79/4F Attach All Ports ======================================================== Module 325 ---------- 30/1E Reset Card 80/50 Detach Local Port 1 (channel 1) 81/51 Attach Local Port 1 (channel 1) 82/52 Detach Local Port 2 (channel 1) 83/53 Attach Local Port 2 (channel 1) 88/58 Detach Local Port 1 (channel 3) 89/59 Attach Local Port 1 (channel 3) 90/5A Detach Local Port 2 (channel 3) 91/5B Attach Local Port 2 (channel 3) 77/4D Detach All Ports 79/4F Attach All Ports 4. CC892.427 (Voice) Code (Dec/Hex) Command ----------------------------------- 04/04 Loopback OFF on Port 1 05/05 Loopback ON on Port 1 06/06 Loopback OFF on Port 2 07/07 Loopback ON on Port 2 08/08 Loopback OFF on Port 3 09/09 Loopback ON on Port 3 10/0A Loopback OFF on Port 4 11/0B Loopback ON on Port 4 12/0C Loopback OFF on Port 5 13/0D Loopback ON on Port 5 14/0E Loopback OFF on Port 6 15/0F Loopback ON on Port 6 16/10 Loopback OFF on Port 7 17/11 Loopback ON on Port 7 18/12 Loopback OFF on Port 8 19/13 Loopback ON on Port 8 20/14 Loopback OFF on Port 9 21/15 Loopback ON on Port 9 22/16 Loopback OFF on Port 10 23/17 Loopback ON on Port 10 24/18 Loopback OFF on Port 11 25/19 Loopback ON on Port 11 26/1A Loopback OFF on Port 12 27/1B Loopback ON on Port 12 28/1C Loopback OFF on Port 13 29/1D Loopback ON on Port 13 30/1E Loopback OFF on Port 14 31/1F Loopback ON on Port 14 32/20 Loopback OFF on Port 15 33/21 Loopback ON on Port 15 34/22 Loopback OFF on Port 16 35/23 Loopback ON on Port 16 37/25 Loopback ALL on Ports 1-8 39/27 Loopback ALL on Ports 9-16 40/28 Alternate Mode on Channel Module #1 41/29 Normal Mode on Channel Module #1 42/2A Alternate Mode on Channel Module #2 43/2B Normal Mode on Channel Module #2 45/2D Configuration Load Module #1 47/2F Configuration Load Module #2 ======================================================
OBJECT-TYPE    
  INTEGER  

fmSlotTrapMask 1.3.6.1.4.1.22.51.2.2.1.10
When the value is 1, no more traps from that slot are sent, until next reset. (temporary mask)
OBJECT-TYPE    
  INTEGER no-mask(0), mask(1)  

pfmSlotTrapMask 1.3.6.1.4.1.22.51.2.2.1.11
When the value is 1, no more traps for that slot will be sent, starting after next reset (permanent mask)
OBJECT-TYPE    
  INTEGER no-mask(0), mask(1)  

fmSlotIpAddr 1.3.6.1.4.1.22.51.2.2.1.12
IP address of a channel card. This is object is available only for channel cards which have their own IP addresses (e.g., LC303/129)
OBJECT-TYPE    
  IpAddress  

fmlu 1.3.6.1.4.1.22.51.3
OBJECT IDENTIFIER    

fmSecondPowerSupplyOK 1.3.6.1.4.1.22.51.3
This trap is issued when second power supply return to work
TRAP-TYPE    
  fmSystemPSOper  

fmLUID 1.3.6.1.4.1.22.51.3.1
Logic unit ID
OBJECT-TYPE    
  INTEGER unconfig(0), none(1), lu100(2), lu101(3), lu102(4), lu103(5), lu104(6), lu105(7), lu106(8), lu107(9), lu108(10)  

fmLUDescr 1.3.6.1.4.1.22.51.3.2
Ascii string. Description of the logic unit
OBJECT-TYPE    
  OCTET STRING  

fmLUStatus 1.3.6.1.4.1.22.51.3.3
One byte of LU status
OBJECT-TYPE    
  OCTET STRING  

fmLULinkSelect 1.3.6.1.4.1.22.51.3.4
Setup LU link.
OBJECT-TYPE    
  INTEGER main-link(0), sec-link(1)  

fmLULoopBackSet 1.3.6.1.4.1.22.51.3.5
Upon writing, performs LLB command. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  INTEGER  

fmLULoopBackClr 1.3.6.1.4.1.22.51.3.6
Upon writing, clear LLB command. When reading the instance of this object the value has no meaning.
OBJECT-TYPE    
  INTEGER  

fmLUTrapMask 1.3.6.1.4.1.22.51.3.7
When the value is 1, no more traps from the LU are sent, until next reset. (temporary mask)
OBJECT-TYPE    
  INTEGER no-mask(0), mask(1)  

pfmLUTrapMask 1.3.6.1.4.1.22.51.3.8
When the value is 1, no more traps for the LU will be sent, starting after next reset (permanent mask)
OBJECT-TYPE    
  INTEGER no-mask(0), mask(1)  

fmPowerSupplyChangeConfig 1.3.6.1.4.1.22.51.4
Issued when a change in the configuration of the power supply is done
TRAP-TYPE    
  fmSystemPSCfg  
  fmSystemPSOper  

fmdiag 1.3.6.1.4.1.22.51.5
OBJECT IDENTIFIER    

fmDiagConfig 1.3.6.1.4.1.22.51.5.1
Version of the station. The version includes station type, hardware version and software version. The string can include CR and LF
OBJECT-TYPE    
  OCTET STRING  

fmDiagTrapInfo 1.3.6.1.4.1.22.51.5.2
Used for generic traps. The first word is the trap code. The rest of the string is the extra information. Contains CR and LF char.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

fmDiagFaultTable 1.3.6.1.4.1.22.51.5.3
Table of fault reports from the agent
OBJECT-TYPE    
  SEQUENCE OF  
    FmDiagFaultEntry

fmDiagFaultEntry 1.3.6.1.4.1.22.51.5.3.1
OBJECT-TYPE    
  FmDiagFaultEntry  

fmDiagFaultIndex 1.3.6.1.4.1.22.51.5.3.1.1
The fault index in the fault table
OBJECT-TYPE    
  INTEGER  

fmDiagFaultReport 1.3.6.1.4.1.22.51.5.3.1.2
Get the faults detected by the agent
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

fmDiagDebug 1.3.6.1.4.1.22.51.5.4
This object is for factory use only. Users must not write into this variable or improper operation can occur.
OBJECT-TYPE    
  INTEGER normal-mode(0), debug-mode(1)  

fmLUOutOfSync 1.3.6.1.4.1.22.51.7
Issued when the Logic unit goes out of synchronization
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLUReturnToSync 1.3.6.1.4.1.22.51.8
Issues as soon as the logic unit returns to synchronization
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLUPassToMain 1.3.6.1.4.1.22.51.9
Issues as soon as the logic unit pass to main link
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLUPassToSecond 1.3.6.1.4.1.22.51.10
Issues as soon as the logic unit pass to second link
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLUPrimaryLinkFail 1.3.6.1.4.1.22.51.11
When primary link of the logic unit fails this trap is issued
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLUPrimaryLinkOK 1.3.6.1.4.1.22.51.12
When primary link of the logic unit fails this trap is issued
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLUSecondLinkFail 1.3.6.1.4.1.22.51.13
When second link of the logic unit fails this trap is issued
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLUSecondLinkOK 1.3.6.1.4.1.22.51.14
When second link of the logic unit fails this trap is issued
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLULLBOn 1.3.6.1.4.1.22.51.15
When the logic unit enters LLB mode
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLULLBOff 1.3.6.1.4.1.22.51.16
When the logic unit exits LLB mode
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmLUChangeConfig 1.3.6.1.4.1.22.51.20
Issues when a change in the LU configuration is done
TRAP-TYPE    
  fmLUID  
  fmLUStatus  

fmSlotTrap 1.3.6.1.4.1.22.51.25
Generated when a significant status has changed in a slot. By xoring the 2 statuses, the NMS can identify the cause of the trap.
TRAP-TYPE    
  fmSlotIndex  
  fmSlotID  
  fmSlotStatus  
  fmSlotPrevStatus  

fmSlotChangeConfig 1.3.6.1.4.1.22.51.26
Issued when the system detects changes in its slots configuration
TRAP-TYPE    
  fmSlotIndex  
  fmSlotID  
  fmSlotStatus  

fmDiagGenericTrap 1.3.6.1.4.1.22.51.30
Generic Trap information
TRAP-TYPE    
  fmDiagTrapInfo  

Defined Objects

RTrapAddrEntry  
SEQUENCE    
  IpAddress as rTrapAddrAddr  
  OCTET STRING as rTrapAddrComm  
  INTEGER as rTrapAddrVer  
  OCTET STRING as rTrapAddrType  
  INTEGER as rTrapAddrState  
  INTEGER as rTrapAddrFlag  
  INTEGER as rTrapAddrAge  

PTrapAddrEntry  
SEQUENCE    
  IpAddress as pTrapAddrAddr  
  OCTET STRING as pTrapAddrComm  
  INTEGER as pTrapAddrVer  
  OCTET STRING as pTrapAddrType  
  INTEGER as pTrapAddrState  

FmSlotEntry  
SEQUENCE    
  INTEGER as fmSlotIndex  
  INTEGER as fmSlotID  
  OCTET STRING as fmSlotDescr  
  OCTET STRING as fmSlotInfo  
  OCTET STRING as fmSlotStatus  
  OCTET STRING as fmSlotPrevStatus  
  INTEGER as fmSlotRLBSet  
  INTEGER as fmSlotRLBClear  
  INTEGER as fmSlotExpCode  
  INTEGER as fmSlotTrapMask  
  INTEGER as pfmSlotTrapMask  
  IpAddress as fmSlotIpAddr  

FmDiagFaultEntry  
SEQUENCE    
  INTEGER as fmDiagFaultIndex  
  OCTET STRING as fmDiagFaultReport