EFDATA-SPECTRACAST-DR5000-MIB

File: EFDATA-SPECTRACAST-DR5000-MIB.mib (15495 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI RFC1213-MIB

Imported symbols

Counter enterprises IpAddress
OBJECT-TYPE DisplayString

Defined Objects

efdata 1.3.6.1.4.1.6247
OBJECT IDENTIFIER    

spectracast 1.3.6.1.4.1.6247.3
OBJECT IDENTIFIER    

dr5000 1.3.6.1.4.1.6247.3.2
OBJECT IDENTIFIER    

general 1.3.6.1.4.1.6247.3.2.1
OBJECT IDENTIFIER    

softwareVersion 1.3.6.1.4.1.6247.3.2.1.1
Software Version (read only).
OBJECT-TYPE    
  DisplayString  

hardwareVersion 1.3.6.1.4.1.6247.3.2.1.2
Hardware Version (read only).
OBJECT-TYPE    
  DisplayString  

macAddress 1.3.6.1.4.1.6247.3.2.1.3
MAC address (read only).
OBJECT-TYPE    
  DisplayString  

multicastRoutingStatus 1.3.6.1.4.1.6247.3.2.1.4
Multicast routing status (read only).
OBJECT-TYPE    
  DisplayString  

rfparameters 1.3.6.1.4.1.6247.3.2.2
OBJECT IDENTIFIER    

rf-Input 1.3.6.1.4.1.6247.3.2.2.1
RF Input frequency (MHz) (read-write).
OBJECT-TYPE    
  DisplayString  

lnb-Frequency 1.3.6.1.4.1.6247.3.2.2.2
LNB frequency (GHz) (read-write).
OBJECT-TYPE    
  DisplayString  

symbolRate 1.3.6.1.4.1.6247.3.2.2.3
Symbol rate (Msps) (read-write).
OBJECT-TYPE    
  DisplayString  

polarity 1.3.6.1.4.1.6247.3.2.2.4
Polarity may take values: Disabled(0), Vertical(14) or Horizontal(18) (read-write).
OBJECT-TYPE    
  INTEGER disabled(0), vertical(14), horizontal(18)  

frequencyRange 1.3.6.1.4.1.6247.3.2.2.5
Frequency range may take values: Low(0) or High(1) (read-write).
OBJECT-TYPE    
  INTEGER low(0), high(1)  

dvbparameters 1.3.6.1.4.1.6247.3.2.3
OBJECT IDENTIFIER    

pids-number 1.3.6.1.4.1.6247.3.2.3.1
Number of PIDs in the list (read only).
OBJECT-TYPE    
  INTEGER  

pidTable 1.3.6.1.4.1.6247.3.2.3.2
List of PID entries. The number of entries is given by PIDs-number value.
OBJECT-TYPE    
  SEQUENCE OF  
    PIDentry

pidEntry 1.3.6.1.4.1.6247.3.2.3.2.1
PID entry containing objects for the particular PID.
OBJECT-TYPE    
  PIDentry  

pidindex 1.3.6.1.4.1.6247.3.2.3.2.1.1
Unique ID for each PID, ranges between 1 and PIDs-number (read-only).
OBJECT-TYPE    
  INTEGER  

pidvalue 1.3.6.1.4.1.6247.3.2.3.2.1.2
Unique PID value (read-write).
OBJECT-TYPE    
  INTEGER  

ccuparameters 1.3.6.1.4.1.6247.3.2.4
OBJECT IDENTIFIER    

ccuConnectionMode 1.3.6.1.4.1.6247.3.2.4.1
CCU connection mode, may take values: Manual(0), Duplex(1) or Simplex(2) (read-write).
OBJECT-TYPE    
  INTEGER manual(0), duplex(1), simplex(2)  

ccuIpAddress 1.3.6.1.4.1.6247.3.2.4.2
CCU IP Address (read-write).
OBJECT-TYPE    
  IpAddress  

ccuUserName 1.3.6.1.4.1.6247.3.2.4.3
User name for connecting to the CCU (write only).
OBJECT-TYPE    
  DisplayString  

ccuPassword 1.3.6.1.4.1.6247.3.2.4.4
Password for connecting to the CCU (write only).
OBJECT-TYPE    
  DisplayString  

encryptedMulticast 1.3.6.1.4.1.6247.3.2.4.5
Set to Enabled in order to receive encrypted multicast.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

dialupparameters 1.3.6.1.4.1.6247.3.2.5
OBJECT IDENTIFIER    

connectionMode 1.3.6.1.4.1.6247.3.2.5.1
Connection Mode, may take values: Manual(0) or Automatic(1) (read-write).
OBJECT-TYPE    
  INTEGER manual(0), automatic(1)  

phoneNumber 1.3.6.1.4.1.6247.3.2.5.2
ISP Phone number, accepts only digits (read-write).
OBJECT-TYPE    
  INTEGER  

userName 1.3.6.1.4.1.6247.3.2.5.3
User name for dialup connection (write only).
OBJECT-TYPE    
  DisplayString  

password 1.3.6.1.4.1.6247.3.2.5.4
Password for dialup connection (write only).
OBJECT-TYPE    
  DisplayString  

dialTone 1.3.6.1.4.1.6247.3.2.5.5
Dialing mode, may take values: Tone(0)) or Pulse(1) (read-write).
OBJECT-TYPE    
  INTEGER tone(0), pulse(1)  

speed 1.3.6.1.4.1.6247.3.2.5.7
Modem connection speed, may take values: 9600, 19200, 38400, 57600 or 115200 (read-write).
OBJECT-TYPE    
  INTEGER  

idleTimeOut 1.3.6.1.4.1.6247.3.2.5.8
Dial on demand time out in minutes. Set to 0 in order to disable dial on demand (read-write).
OBJECT-TYPE    
  INTEGER  

authentication 1.3.6.1.4.1.6247.3.2.5.9
Authentication mode, may take values: PAP or CHAP (read-write).
OBJECT-TYPE    
  INTEGER pap(0), chap(1)  

status 1.3.6.1.4.1.6247.3.2.6
OBJECT IDENTIFIER    

initializationStatus 1.3.6.1.4.1.6247.3.2.6.1
Card initialization status (read only).
OBJECT-TYPE    
  DisplayString  

demodulatorStatus 1.3.6.1.4.1.6247.3.2.6.2
Current demodulator status (read only).
OBJECT-TYPE    
  DisplayString  

spectralInversion 1.3.6.1.4.1.6247.3.2.6.3
Spectral inversion (read only).
OBJECT-TYPE    
  DisplayString  

ber-before-Err-Correction 1.3.6.1.4.1.6247.3.2.6.4
BER before error correction (read only).
OBJECT-TYPE    
  DisplayString  

fec 1.3.6.1.4.1.6247.3.2.6.5
FEC (read only).
OBJECT-TYPE    
  DisplayString  

agc 1.3.6.1.4.1.6247.3.2.6.6
Gain value set by AGC (Db) (read only).
OBJECT-TYPE    
  DisplayString  

frequencyOffset 1.3.6.1.4.1.6247.3.2.6.7
Frequency offset (read only).
OBJECT-TYPE    
  DisplayString  

eb-N0 1.3.6.1.4.1.6247.3.2.6.8
Eb/N0 (read only).
OBJECT-TYPE    
  DisplayString  

ccu-connection-status 1.3.6.1.4.1.6247.3.2.6.9
CCU connection status, may take values Disconnected(0), Connected(1), Trying to Connect(2), Waiting for Dialup(3), or Waiting for RF Lock(4) (read only).
OBJECT-TYPE    
  INTEGER disconnected(0), connected(1), tryingtoconnect(2), waitingfordialup(3), waitingforrflock(4)  

dialup-connection-status 1.3.6.1.4.1.6247.3.2.6.10
Dialup connection status, may take values Disconnected(0), Connected(1), Trying to Connect(2) or Idle(10) (read only).
OBJECT-TYPE    
  INTEGER disconnected(0), connected(1), tryingtoconnect(2), idle(10)  

flowStatistics 1.3.6.1.4.1.6247.3.2.7
OBJECT IDENTIFIER    

totalThroughput 1.3.6.1.4.1.6247.3.2.7.1
Total throughput in bytes/sec. (read only).
OBJECT-TYPE    
  DisplayString  

unicastThroughput 1.3.6.1.4.1.6247.3.2.7.2
Unicast throughput in bytes/sec. (read only).
OBJECT-TYPE    
  DisplayString  

multicastThroughput 1.3.6.1.4.1.6247.3.2.7.3
Multicast throughput in bytes/sec. (read only).
OBJECT-TYPE    
  DisplayString  

totalPackets 1.3.6.1.4.1.6247.3.2.7.4
Total packets received since reset (read only).
OBJECT-TYPE    
  DisplayString  

badPackets 1.3.6.1.4.1.6247.3.2.7.5
Bad RS packets (read only).
OBJECT-TYPE    
  DisplayString  

correctedPackets 1.3.6.1.4.1.6247.3.2.7.6
Corrected RS packets (read only).
OBJECT-TYPE    
  DisplayString  

resetFlowStatistics 1.3.6.1.4.1.6247.3.2.7.7
Set to True in order to reset flow statistics.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

maintenance 1.3.6.1.4.1.6247.3.2.8
OBJECT IDENTIFIER    

driverRestart 1.3.6.1.4.1.6247.3.2.8.1
Set to True in order to restart the Driver.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

dialupConnect 1.3.6.1.4.1.6247.3.2.8.2
Set to True in order to dial your ISP.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

dialupDisconnect 1.3.6.1.4.1.6247.3.2.8.3
Set to true in order to disconnect from your ISP.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

ccuconnect 1.3.6.1.4.1.6247.3.2.8.4
Set to True in order to connect to the CCU.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

ccudisconnect 1.3.6.1.4.1.6247.3.2.8.5
Set to True in order to disconnect from the CCU.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

upgrade 1.3.6.1.4.1.6247.3.2.8.6
Set to the upgrade file name, and upgrade the system. After upgrade finishes the system reboots automatically (write only).
OBJECT-TYPE    
  DisplayString  

snmpVariables 1.3.6.1.4.1.6247.3.2.9
OBJECT IDENTIFIER    

enableTraps 1.3.6.1.4.1.6247.3.2.9.1
Set to True in order to start getting traps.
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

snmpManagerIP 1.3.6.1.4.1.6247.3.2.9.2
IP address of SNMP manager where traps have to be sent to (read-write).
OBJECT-TYPE    
  IpAddress  

trapPeriod 1.3.6.1.4.1.6247.3.2.9.3
Trap sending period in seconds (read-write).
OBJECT-TYPE    
  INTEGER  

trapList 1.3.6.1.4.1.6247.3.2.9.4
OBJECT IDENTIFIER    

multicastDaemon 1.3.6.1.4.1.6247.3.2.9.4.1
OBJECT IDENTIFIER    

multicastTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.1.1
Use multicast daemon status trap. A trap message is sent when multicast daemon goes down (read-write).
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

demodulator 1.3.6.1.4.1.6247.3.2.9.4.2
OBJECT IDENTIFIER    

demodulatorTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.2.1
Use demodulator status trap. A trap message is sent when the demodulator loses data lock (read-write).
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

ccuConnection 1.3.6.1.4.1.6247.3.2.9.4.3
OBJECT IDENTIFIER    

ccuTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.3.1
Use CCU connection status trap. A trap message is sent when CCU status changes from Connected to any other one (read-write).
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

dialup 1.3.6.1.4.1.6247.3.2.9.4.4
OBJECT IDENTIFIER    

dialupTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.4.1
Use dialup connection status trap. A trap message is sent when dialup status changes from Connected to any other one except Idle (read-write).
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

berLevel 1.3.6.1.4.1.6247.3.2.9.4.5
OBJECT IDENTIFIER    

berTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.5.1
Use BER level trap. A trap message is sent when BER value is greater then BER trap threshold (read-write).
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

berThreshold 1.3.6.1.4.1.6247.3.2.9.4.5.2
BER level threshold value (read-write).
OBJECT-TYPE    
  OCTET STRING  

freqOffset 1.3.6.1.4.1.6247.3.2.9.4.6
OBJECT IDENTIFIER    

freqOffsetTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.6.1
Use frequency offset trap. A trap message is sent when absolute frequency offset is greater then frequency offset trap threshold (read-write).
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

freqOffsetThreshold 1.3.6.1.4.1.6247.3.2.9.4.6.2
Frequency offset threshold value (read-write).
OBJECT-TYPE    
  OCTET STRING  

agcLevel 1.3.6.1.4.1.6247.3.2.9.4.7
OBJECT IDENTIFIER    

agcTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.7.1
Use AGC level trap. A trap message is sent when gain value is greater then AGC trap threshold (read-write).
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agcThreshold 1.3.6.1.4.1.6247.3.2.9.4.7.2
AGC threshold value (read-write)
OBJECT-TYPE    
  OCTET STRING  

Defined Objects

MPEG-PID-mode  
INTEGER manual(1), automatic(2)    

FLAG  
INTEGER on(1), off(2)    

PIDentry  
SEQUENCE    
  INTEGER as pidindex  
  INTEGER as pidvalue