
| RFC1155-SMI | RFC-1212 | RFC1213-MIB |
| TimeTicks | enterprises | OBJECT-TYPE |
| DisplayString |
| eicon | 1.3.6.1.4.1.434 | ||
| OBJECT IDENTIFIER | |||
| management | 1.3.6.1.4.1.434.2 | ||
| OBJECT IDENTIFIER | |||
| mibv2 | 1.3.6.1.4.1.434.2.2 | ||
| OBJECT IDENTIFIER | |||
| module | 1.3.6.1.4.1.434.2.2.4 | ||
| OBJECT IDENTIFIER | |||
| dialer | 1.3.6.1.4.1.434.2.2.4.16 | ||
| OBJECT IDENTIFIER | |||
| dialerInfoTable | 1.3.6.1.4.1.434.2.2.4.16.1 | ||
| General Information Table for dailer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerInfoEntry | |||
| dialerInfoEntry | 1.3.6.1.4.1.434.2.2.4.16.1.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerInfoEntry | |||
| dialerInfoPortRef | 1.3.6.1.4.1.434.2.2.4.16.1.1.1 | ||
| The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerInfoType | 1.3.6.1.4.1.434.2.2.4.16.1.1.2 | ||
| Type of interface connecting the gateway to local or remote host computers. | |||
| OBJECT-TYPE | |||
| INTEGER | direct(1), v25bis(2), v22bis(3), at-cmd(4), isdn-stat(5), v32bis(6), none(7), other(8) | ||
| dialerInfoTimeStart | 1.3.6.1.4.1.434.2.2.4.16.1.1.3 | ||
| The time elapsed since the dialer was statrted. | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| dialerInfoTimeConnect | 1.3.6.1.4.1.434.2.2.4.16.1.1.4 | ||
| The time elapsed since the dialer established the current connection. | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| dialerInfoLineSpeed | 1.3.6.1.4.1.434.2.2.4.16.1.1.5 | ||
| The speed setting of the driver (line speed), or the dialer (modem speed). | |||
| OBJECT-TYPE | |||
| INTEGER | 0..99999 | ||
| dialerInfoDataEncoding | 1.3.6.1.4.1.434.2.2.4.16.1.1.6 | ||
| The type of data encoding used on the connection. | |||
| OBJECT-TYPE | |||
| DataEncoding | |||
| dialerInfoClockType | 1.3.6.1.4.1.434.2.2.4.16.1.1.7 | ||
| The type of clocking used by the modem. | |||
| OBJECT-TYPE | |||
| ClockType | |||
| dialerDirectInfoTable | 1.3.6.1.4.1.434.2.2.4.16.2 | ||
| General Information Table for Direct dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerDirectInfoEntry | |||
| dialerDirectInfoEntry | 1.3.6.1.4.1.434.2.2.4.16.2.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerDirectInfoEntry | |||
| dialerDirectPortRef | 1.3.6.1.4.1.434.2.2.4.16.2.1.1 | ||
| The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerDirectIfType | 1.3.6.1.4.1.434.2.2.4.16.2.1.2 | ||
| Interface type of the Dialer | |||
| OBJECT-TYPE | |||
| INTEGER | rs232(1), v35(2), x21(3) | ||
| dialerDirectMode | 1.3.6.1.4.1.434.2.2.4.16.2.1.3 | ||
| States whether the modem is connected to a Leased or Dial-Up phone line. | |||
| OBJECT-TYPE | |||
| INTEGER | leased(1), dial(2) | ||
| dialerDirectConnDelay | 1.3.6.1.4.1.434.2.2.4.16.2.1.4 | ||
| Max time for connection in seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerDirectRtsDelay | 1.3.6.1.4.1.434.2.2.4.16.2.1.5 | ||
| Delay between arrival of DSR and activation of RTS circuit in msec. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerDirectState | 1.3.6.1.4.1.434.2.2.4.16.2.1.6 | ||
| State of the Direct dialer: closed(1) - Modem signals on a dial modem were lost. opening(2) - Link is being set up (modem dialing). asnwering(3) - Accepting call from remote. delaying(4) - Waiting for a timer to expire. opened(5) - Physical link is established. Closing(6) - Disconnecting the physical link. ringing (7) - answer-wait (8) - originating (9) - connecting (10) - connect-delay (11) - connected (12) - disconnecting (13) - remote-disc (14) - local-disc (15) - connect-req (16) - incomming-call (17) - outgoing-call (18) - outgoing-delay (19) - | |||
| OBJECT-TYPE | |||
| INTEGER | closed(1), opening(2), answering(3), delaying(4), opened(5), closing(6), ringing(7), answer-wait(8), originating(9), connecting(10), connect-delay(11), connected(12), disconnecting(13), remote-disc(14), local-disc(15), connect-req(16), incomming-call(17), outgoing-call(18), outgoing-delay(19) | ||
| dialerDirectRs232InfoTable | 1.3.6.1.4.1.434.2.2.4.16.3 | ||
| General Information Table for Direct dialer RS232. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerDirectRs232InfoEntry | |||
| dialerDirectRs232InfoEntry | 1.3.6.1.4.1.434.2.2.4.16.3.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerDirectRs232InfoEntry | |||
| dialerDirectRs232PortRef | 1.3.6.1.4.1.434.2.2.4.16.3.1.1 | ||
| The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerDirectRs232DbounceDelay | 1.3.6.1.4.1.434.2.2.4.16.3.1.2 | ||
| This applies to Leased line only. It is the amount of time, expressed in msecs, that DSR signal stays on. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerDirectRs232DtrSignal | 1.3.6.1.4.1.434.2.2.4.16.3.1.3 | ||
| The current status of the DTR signal. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerDirectRs232DsrSignal | 1.3.6.1.4.1.434.2.2.4.16.3.1.4 | ||
| The current status of the DSR signal. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerDirectRs232RiSignal | 1.3.6.1.4.1.434.2.2.4.16.3.1.5 | ||
| The current status of the RI signal. This is set to ON when there is an incoming call. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerDirectX21InfoTable | 1.3.6.1.4.1.434.2.2.4.16.4 | ||
| General Information Table for Direct dialer X21. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerDirectX21InfoEntry | |||
| dialerDirectX21InfoEntry | 1.3.6.1.4.1.434.2.2.4.16.4.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerDirectX21InfoEntry | |||
| dialerDirectX21PortRef | 1.3.6.1.4.1.434.2.2.4.16.4.1.1 | ||
| The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerDirectX21CtrlSignal | 1.3.6.1.4.1.434.2.2.4.16.4.1.2 | ||
| The control circuit status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerDirectX21IndicSignal | 1.3.6.1.4.1.434.2.2.4.16.4.1.3 | ||
| The indication circuit status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV25bisInfoTable | 1.3.6.1.4.1.434.2.2.4.16.5 | ||
| General Information Table for V25Bis dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerV25bisInfoEntry | |||
| dialerV25bisInfoEntry | 1.3.6.1.4.1.434.2.2.4.16.5.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerV25bisInfoEntry | |||
| dialerV25bisPortRef | 1.3.6.1.4.1.434.2.2.4.16.5.1.1 | ||
| The Port Number. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerV25bisPrimaryNum | 1.3.6.1.4.1.434.2.2.4.16.5.1.2 | ||
| The main telephone number stored in the dialer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV25bisSecondaryNum | 1.3.6.1.4.1.434.2.2.4.16.5.1.3 | ||
| The alternate telephone number stored in the dialer. This number is dialed if the main number is busy of if there is no answer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV25bisAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.5.1.4 | ||
| States whether or not the dialer answers incoming calls. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV25bisRetryAllowed | 1.3.6.1.4.1.434.2.2.4.16.5.1.5 | ||
| Indicates whether or not the dialer will try to redial a number that is busy or does not answer. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV25bisMaxRetries | 1.3.6.1.4.1.434.2.2.4.16.5.1.6 | ||
| Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisRetryDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.7 | ||
| The amount of time in msecs between redial attempts. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisConnDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.8 | ||
| Maximum delay for connection establishment (secs). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisOnOffDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.9 | ||
| The delay allowed in seconds for the DSR to go off before hangup. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisLossDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.10 | ||
| Amount of delay in msecs before DSR debouncing for OFF. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisMinDsrOnDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.11 | ||
| Amount of delay in msecs before DSR debouncing for ON. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisRiDtrDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.12 | ||
| Amount of delay in msec before raising DTR when RING occurs. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisHangupDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.13 | ||
| Amount of delay in secs before hangup, if DSR goes OFF in connected state. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisDeltaRiDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.14 | ||
| Delay in msecs before rings are no longer occur. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisCtsOnDelay | 1.3.6.1.4.1.434.2.2.4.16.5.1.15 | ||
| Maximum delay in msecs for sending a message to the modem. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV25bisDtrSignal | 1.3.6.1.4.1.434.2.2.4.16.5.1.16 | ||
| DTR status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV25bisDsrSignal | 1.3.6.1.4.1.434.2.2.4.16.5.1.17 | ||
| DSR status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV25bisCtsSignal | 1.3.6.1.4.1.434.2.2.4.16.5.1.18 | ||
| CTS status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV25bisRiSignal | 1.3.6.1.4.1.434.2.2.4.16.5.1.19 | ||
| RI status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV25bisState | 1.3.6.1.4.1.434.2.2.4.16.5.1.20 | ||
| The status of the V.25bis modem: on-hook (1) - Modem not active ready (2) - Connection established dialing (3) - Dialing a number connect (4) - Successful dial attemp data-tran (5) - Data transfer state enabled retrying (6) - Awaiting call attempt ringing (7) - Incoming call present ans-start (8) - Connect request received ans-cplt (9) - Call establised. hanging-up (10) - Dialer disconnecting from DCE ignore-ring (11) - Ringing signal ignored collision (12) - Collision between connection request and incoming call ans-accepting (13) - Accepted incoming call prog-rdy (14) - Dialer ready to communicate with modem program (15) - Modem ready to communicate with dialer prog-ring (16) - Signal detected from DCE prog-not-rdy (17) - Dialer not ready to communicate with modem. | |||
| OBJECT-TYPE | |||
| INTEGER | on-hook(1), ready(2), dialing(3), connect(4), data-tran(5), retrying(6), ringing(7), ans-start(8), ans-cplt(9), hanging-up(10), ignore-ring(11), collision(12), ans-accepting(13), prog-rdy(14), program(15), prog-ring(16), prog-not-rdy(17) | ||
| dialerAtCmdInfoTable | 1.3.6.1.4.1.434.2.2.4.16.6 | ||
| General Information Table for AT-CMD dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerAtCmdInfoEntry | |||
| dialerAtCmdInfoEntry | 1.3.6.1.4.1.434.2.2.4.16.6.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerAtCmdInfoEntry | |||
| dialerAtCmdPortRef | 1.3.6.1.4.1.434.2.2.4.16.6.1.1 | ||
| The Port Number. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerAtCmdPrimaryNum | 1.3.6.1.4.1.434.2.2.4.16.6.1.2 | ||
| The main telephone number stored in the dialer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerAtCmdSecondaryNum | 1.3.6.1.4.1.434.2.2.4.16.6.1.3 | ||
| The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerAtCmdAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.6.1.4 | ||
| States whether or not the dialer answers incoming calls. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerAtCmdRetryAllowed | 1.3.6.1.4.1.434.2.2.4.16.6.1.5 | ||
| Indicates whether or not the dialer will try to redial a number that is busy or does not answer. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerAtCmdMaxRetries | 1.3.6.1.4.1.434.2.2.4.16.6.1.6 | ||
| Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdRetryDelay | 1.3.6.1.4.1.434.2.2.4.16.6.1.7 | ||
| The amount of time in msecs between redial attempts. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdConnDelay | 1.3.6.1.4.1.434.2.2.4.16.6.1.8 | ||
| Maximum delay for connection establishment (secs). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdOnOffDelay | 1.3.6.1.4.1.434.2.2.4.16.6.1.9 | ||
| The delay allowed in seconds for the DSR signal to go off before hangup. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdLossDelay | 1.3.6.1.4.1.434.2.2.4.16.6.1.10 | ||
| Number of msecs allowed before DSR debouncing for OFF. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdMinDsrOnDelay | 1.3.6.1.4.1.434.2.2.4.16.6.1.11 | ||
| msecs DSR debouncing for ON before going OFF. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdRiDtrDelay | 1.3.6.1.4.1.434.2.2.4.16.6.1.12 | ||
| Amount of delay in msec, before raising DTR when RING occurs. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdHangupDelay | 1.3.6.1.4.1.434.2.2.4.16.6.1.13 | ||
| Amount of delay in secs before hangup, if DSR goes OFF in connected state. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdDeltaRiDelay | 1.3.6.1.4.1.434.2.2.4.16.6.1.14 | ||
| delay in msecs before rings no longer occur. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdParity | 1.3.6.1.4.1.434.2.2.4.16.6.1.15 | ||
| The parity. | |||
| OBJECT-TYPE | |||
| INTEGER | none(1), odd(2), even(3) | ||
| dialerAtCmdBitsPerByte | 1.3.6.1.4.1.434.2.2.4.16.6.1.16 | ||
| The number of data bits per byte. | |||
| OBJECT-TYPE | |||
| INTEGER | data7(1), data8(2) | ||
| dialerAtCmdModemSpeed | 1.3.6.1.4.1.434.2.2.4.16.6.1.17 | ||
| Modem Speed. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerAtCmdDtrSignal | 1.3.6.1.4.1.434.2.2.4.16.6.1.18 | ||
| DTR status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerAtCmdDsrSignal | 1.3.6.1.4.1.434.2.2.4.16.6.1.19 | ||
| DSR status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerAtCmdRiSignal | 1.3.6.1.4.1.434.2.2.4.16.6.1.20 | ||
| RI status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerAtCmdState | 1.3.6.1.4.1.434.2.2.4.16.6.1.21 | ||
| The status of the AT modem: on-hook (1) - modem not active dialing (2) - dialing a number answering (3) - accepting call from remote ringing (4) - incoming call present retrying (5) - awaiting new call attempt off-hook (6) - Modem active hanging-up (7) - Disconnecting from DCE | |||
| OBJECT-TYPE | |||
| INTEGER | on-hook(1), dialing(2), answering(3), ringing(4), retrying(5), off-hook(6), hanging-up(7) | ||
| dialerV22BisDnaInfoTable | 1.3.6.1.4.1.434.2.2.4.16.7 | ||
| General Information Table for V22BISDNA dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerV22BisDnaInfoEntry | |||
| dialerV22BisDnaInfoEntry | 1.3.6.1.4.1.434.2.2.4.16.7.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerV22BisDnaInfoEntry | |||
| dialerV22BisDnaPortRef | 1.3.6.1.4.1.434.2.2.4.16.7.1.1 | ||
| The Port Number. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerV22BisDnaPrimaryNum | 1.3.6.1.4.1.434.2.2.4.16.7.1.2 | ||
| The main telephone number stored in the dialer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV22BisDnaSecondaryNum | 1.3.6.1.4.1.434.2.2.4.16.7.1.3 | ||
| The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV22BisDnaAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.7.1.4 | ||
| States whether or not the dialer answers incoming calls. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisDnaRetryAllowed | 1.3.6.1.4.1.434.2.2.4.16.7.1.5 | ||
| Indicates whether or not the dialer will try to redial a number that is busy or does not answer. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisDnaMaxRetries | 1.3.6.1.4.1.434.2.2.4.16.7.1.6 | ||
| Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaCallProgress | 1.3.6.1.4.1.434.2.2.4.16.7.1.7 | ||
| Call progress tone detection. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisDnaDecadic | 1.3.6.1.4.1.434.2.2.4.16.7.1.8 | ||
| Indicates whether Decadic dialing is active or not. Decadic dialing does the following: each digit you dial is subtracted from 10, and the result is the number actually dialed. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisDnaMakeBreakRatio | 1.3.6.1.4.1.434.2.2.4.16.7.1.9 | ||
| Ratio for PULSE and DIAL make and break time. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaRetryDelay | 1.3.6.1.4.1.434.2.2.4.16.7.1.10 | ||
| The amount of time in msecs between redial attempts. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaMinDialDelay | 1.3.6.1.4.1.434.2.2.4.16.7.1.11 | ||
| The length of delay (msec) associated with a comma placed in a dialing command. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaWaitDialTone | 1.3.6.1.4.1.434.2.2.4.16.7.1.12 | ||
| The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaWaitCarrier | 1.3.6.1.4.1.434.2.2.4.16.7.1.13 | ||
| The amount of time (msec) the modem waits for valid carrier after completing a dial. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaHndshkAbortTimer | 1.3.6.1.4.1.434.2.2.4.16.7.1.14 | ||
| The amount of time (sec) allowed before the call is aborted if DSR does not go ON. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaGuardTone | 1.3.6.1.4.1.434.2.2.4.16.7.1.15 | ||
| Indicates a guard tone frequency. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaPulseDelay | 1.3.6.1.4.1.434.2.2.4.16.7.1.16 | ||
| The delay (msec) between digits dialed on a pulse line. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaDTMFDuration | 1.3.6.1.4.1.434.2.2.4.16.7.1.17 | ||
| The tone duration (msec) used in DMTF dialing. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaDTMFDelay | 1.3.6.1.4.1.434.2.2.4.16.7.1.18 | ||
| The delay (msec) between digits dialed when in tone dial mode. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaDTMFLevel | 1.3.6.1.4.1.434.2.2.4.16.7.1.19 | ||
| The tone dialing level attenuation in dB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaTxLevel | 1.3.6.1.4.1.434.2.2.4.16.7.1.20 | ||
| The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaRxLevel | 1.3.6.1.4.1.434.2.2.4.16.7.1.21 | ||
| Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisDnaRiNbr | 1.3.6.1.4.1.434.2.2.4.16.7.1.22 | ||
| The number of rings required before the modem answers, if it is set to auto-answer mode. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaDeltaRiDelay | 1.3.6.1.4.1.434.2.2.4.16.7.1.23 | ||
| delay in msecs before rings no longer occur. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaRiDtrDelay | 1.3.6.1.4.1.434.2.2.4.16.7.1.24 | ||
| Amount of delay in msec, before raising DTR when RING occurs. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaDsrRtsDelay | 1.3.6.1.4.1.434.2.2.4.16.7.1.25 | ||
| Delay between arrival of DSR and activation of RTS circuit in msec. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaModemSpeed | 1.3.6.1.4.1.434.2.2.4.16.7.1.26 | ||
| Modem Speed. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisDnaDtrSignal | 1.3.6.1.4.1.434.2.2.4.16.7.1.27 | ||
| DTR status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisDnaDsrSignal | 1.3.6.1.4.1.434.2.2.4.16.7.1.28 | ||
| DSR status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisDnaRiSignal | 1.3.6.1.4.1.434.2.2.4.16.7.1.29 | ||
| RI status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisDnaCdSignal | 1.3.6.1.4.1.434.2.2.4.16.7.1.30 | ||
| Carrier detect status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisDnaToneInd | 1.3.6.1.4.1.434.2.2.4.16.7.1.31 | ||
| Tone indication. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisDnaDloInd | 1.3.6.1.4.1.434.2.2.4.16.7.1.32 | ||
| Dial line occupied indication. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisDnaState | 1.3.6.1.4.1.434.2.2.4.16.7.1.33 | ||
| Status of the V22bis Dna modem: dialing-phone (1) - Dialing a number on the phone attached to the DNA phone plug. dialing-mdm (2) - Dialing a remote modem retrying (3) - Awaiting call attempt ringing (4) - Incoming call present line-busy (5) - Busy signal encountered off-hook (6) - Modem active on-hook (7) - Modem not active answering (8) - Accepting call from remote delaying (9) - Waiting for timer to expire voice-com (10) - the line is already used by a voice connection. handshaking (11) - Synchronizing calls with remote wait-ringback (12) - Awaiting remote response initialising (13) - initializing modem | |||
| OBJECT-TYPE | |||
| INTEGER | dialing-phone(1), dialing-mdm(2), retrying(3), ringing(4), line-busy(5), off-hook(6), on-hook(7), answering(8), delaying(9), voice-com(10), handshaking(11), wait-ringback(12), initialising(13) | ||
| dialerV22BisImcInfoTable | 1.3.6.1.4.1.434.2.2.4.16.8 | ||
| General Information Table for V22BISIMC dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerV22BisImcInfoEntry | |||
| dialerV22BisImcInfoEntry | 1.3.6.1.4.1.434.2.2.4.16.8.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerV22BisImcInfoEntry | |||
| dialerV22BisImcPortRef | 1.3.6.1.4.1.434.2.2.4.16.8.1.1 | ||
| The Port Number. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerV22BisImcPrimaryNum | 1.3.6.1.4.1.434.2.2.4.16.8.1.2 | ||
| The main telephone number stored in the dialer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV22BisImcSecondaryNum | 1.3.6.1.4.1.434.2.2.4.16.8.1.3 | ||
| The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV22BisImcAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.8.1.4 | ||
| States whether or not the dialer answers incoming calls. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisImcRetryAllowed | 1.3.6.1.4.1.434.2.2.4.16.8.1.5 | ||
| Indicates whether or not the dialer will try to redial a number that is busy or does not answer. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisImcMaxRetries | 1.3.6.1.4.1.434.2.2.4.16.8.1.6 | ||
| Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcCallProgress | 1.3.6.1.4.1.434.2.2.4.16.8.1.7 | ||
| Call progress tone detection. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisImcDecadic | 1.3.6.1.4.1.434.2.2.4.16.8.1.8 | ||
| Indicates whether Decadic dialing is active or not. Decadic dialing does the following: each digit you dial is subtracted from 10, and the result is the number actually dialed. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV22BisImcMakeBreakRatio | 1.3.6.1.4.1.434.2.2.4.16.8.1.9 | ||
| Ratio of PULSE and DIAL make and break time. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcRetryDelay | 1.3.6.1.4.1.434.2.2.4.16.8.1.10 | ||
| The amount of time in msecs between redial attempts. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcMinDialDelay | 1.3.6.1.4.1.434.2.2.4.16.8.1.11 | ||
| The length of delay (msec) associated with a comma placed in a dialing command. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcWaitDialTone | 1.3.6.1.4.1.434.2.2.4.16.8.1.12 | ||
| The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcWaitCarrier | 1.3.6.1.4.1.434.2.2.4.16.8.1.13 | ||
| The amount of time (msec) the modem waits for valid carrier after completing a dial. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcHndshkAbortTimer | 1.3.6.1.4.1.434.2.2.4.16.8.1.14 | ||
| The amount of time (sec) allowed before the call is aborted if DSR does not go ON. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcGuardTone | 1.3.6.1.4.1.434.2.2.4.16.8.1.15 | ||
| Indicates a guard tone frequency. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcPulseDelay | 1.3.6.1.4.1.434.2.2.4.16.8.1.16 | ||
| The delay between (msec) digits dialed on a pulse line. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcDTMFDuration | 1.3.6.1.4.1.434.2.2.4.16.8.1.17 | ||
| The tone (msec) duration used in DMTF dialing. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcDTMFDelay | 1.3.6.1.4.1.434.2.2.4.16.8.1.18 | ||
| The delay (msec) between digits dialed when in tone dial mode. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcDTMFLevel | 1.3.6.1.4.1.434.2.2.4.16.8.1.19 | ||
| The tone dialing level attenuation in dB. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcTxLevel | 1.3.6.1.4.1.434.2.2.4.16.8.1.20 | ||
| The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcRxLevel | 1.3.6.1.4.1.434.2.2.4.16.8.1.21 | ||
| Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcRiNbr | 1.3.6.1.4.1.434.2.2.4.16.8.1.22 | ||
| The numbet of rings required before the modem answers, if it is set to auto-answer mode. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcDeltaRiDelay | 1.3.6.1.4.1.434.2.2.4.16.8.1.23 | ||
| delay in msecs before rings no longer occur. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcRiDtrDelay | 1.3.6.1.4.1.434.2.2.4.16.8.1.24 | ||
| Amount of delay in msec, before raising DTR when RING occurs. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcDsrRtsDelay | 1.3.6.1.4.1.434.2.2.4.16.8.1.25 | ||
| Delay between arrival of DSR and activation of RTS circuit in msec. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcModemSpeed | 1.3.6.1.4.1.434.2.2.4.16.8.1.26 | ||
| Modem Speed. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV22BisImcDtrSignal | 1.3.6.1.4.1.434.2.2.4.16.8.1.27 | ||
| DTR status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisImcDsrSignal | 1.3.6.1.4.1.434.2.2.4.16.8.1.28 | ||
| DSR status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisImcRiSignal | 1.3.6.1.4.1.434.2.2.4.16.8.1.29 | ||
| RI status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisImcCdSignal | 1.3.6.1.4.1.434.2.2.4.16.8.1.30 | ||
| Carrier Detect status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisImcToneInd | 1.3.6.1.4.1.434.2.2.4.16.8.1.31 | ||
| Tone indication. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisImcDloInd | 1.3.6.1.4.1.434.2.2.4.16.8.1.32 | ||
| Dial line occupied indication. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV22BisImcLineType | 1.3.6.1.4.1.434.2.2.4.16.8.1.33 | ||
| States whether the modem is connected to a Leased or Dial-Up phone line. | |||
| OBJECT-TYPE | |||
| INTEGER | dial(1), leased(2) | ||
| dialerV22BisImcLeasedOpertn | 1.3.6.1.4.1.434.2.2.4.16.8.1.34 | ||
| This applies to Leased line type only. This field states whether the dialer will go off-hook in Originate or Answer mode. | |||
| OBJECT-TYPE | |||
| INTEGER | answer(1), originate(2) | ||
| dialerV22BisImcSpeakerLevel | 1.3.6.1.4.1.434.2.2.4.16.8.1.35 | ||
| The volume level of the Eiconcard's speaker. | |||
| OBJECT-TYPE | |||
| INTEGER | low(1), high(2) | ||
| dialerV22BisImcState | 1.3.6.1.4.1.434.2.2.4.16.8.1.36 | ||
| Status of the V22bis Imc modem: dialing-phone (1) - Dialing a number on the phone attached to the DNA phone plug. dialing-mdm (2) - Dialing a remote modem retrying (3) - Awaiting call attempt ringing (4) - Incoming call present line-busy (5) - Busy signal encountered off-hook (6) - Modem active on-hook (7) - Modem not active answering (8) - Accepting call from remote delaying (9) - Waiting for timer to expire voice-com (10) - the line is already used by a voice connection. handshaking (11) - Syncronizing calls with remote wait-ringback (12) - Awaiting remote response initialising (13) - initializing modem | |||
| OBJECT-TYPE | |||
| INTEGER | dialing-phone(1), dialing-mdm(2), retrying(3), ringing(4), line-busy(5), off-hook(6), on-hook(7), answering(8), delaying(9), voice-com(10), handshaking(11), wait-ringback(12), initialising(13) | ||
| dialerV32BisInfoTable | 1.3.6.1.4.1.434.2.2.4.16.9 | ||
| General Information Table for V32Bis dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerV32BisInfoEntry | |||
| dialerV32BisInfoEntry | 1.3.6.1.4.1.434.2.2.4.16.9.1 | ||
| The set of dialer configuration attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerV32BisInfoEntry | |||
| dialerV32BisPortRef | 1.3.6.1.4.1.434.2.2.4.16.9.1.1 | ||
| The Port Number. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerV32BisPrimNum | 1.3.6.1.4.1.434.2.2.4.16.9.1.2 | ||
| The main telephone number stored in the dialer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV32BisSecNum | 1.3.6.1.4.1.434.2.2.4.16.9.1.3 | ||
| The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV32BisOverrNum | 1.3.6.1.4.1.434.2.2.4.16.9.1.4 | ||
| Override number. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV32BisCurrNum | 1.3.6.1.4.1.434.2.2.4.16.9.1.5 | ||
| Current number. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerV32BisPrimBitRate | 1.3.6.1.4.1.434.2.2.4.16.9.1.6 | ||
| Default bit rate for primary number. | |||
| OBJECT-TYPE | |||
| PrimBitRate | |||
| dialerV32BisSecBitRate | 1.3.6.1.4.1.434.2.2.4.16.9.1.7 | ||
| Default bit rate for secondary number. | |||
| OBJECT-TYPE | |||
| PrimBitRate | |||
| dialerV32BisOverrBitRate | 1.3.6.1.4.1.434.2.2.4.16.9.1.8 | ||
| Default bit rate for override number. | |||
| OBJECT-TYPE | |||
| PrimBitRate | |||
| dialerV32BisCurrBitRate | 1.3.6.1.4.1.434.2.2.4.16.9.1.9 | ||
| Default bit rate for current number. | |||
| OBJECT-TYPE | |||
| PrimBitRate | |||
| dialerV32BisPrimConfig | 1.3.6.1.4.1.434.2.2.4.16.9.1.10 | ||
| Dial modem primary configuration | |||
| OBJECT-TYPE | |||
| PrimCfg | |||
| dialerV32BisSecConfig | 1.3.6.1.4.1.434.2.2.4.16.9.1.11 | ||
| Dial modem secondary configuration | |||
| OBJECT-TYPE | |||
| PrimCfg | |||
| dialerV32BisOverrConfig | 1.3.6.1.4.1.434.2.2.4.16.9.1.12 | ||
| Dial modem override configuration | |||
| OBJECT-TYPE | |||
| PrimCfg | |||
| dialerV32BisCurrConfig | 1.3.6.1.4.1.434.2.2.4.16.9.1.13 | ||
| Dial modem current configuration | |||
| OBJECT-TYPE | |||
| PrimCfg | |||
| dialerV32BisCurrRetry | 1.3.6.1.4.1.434.2.2.4.16.9.1.14 | ||
| Current number of retries. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisRingCount | 1.3.6.1.4.1.434.2.2.4.16.9.1.15 | ||
| Incoming ring counter. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.9.1.16 | ||
| States whether or not the dialer answers incoming calls. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV32BisDialMethod | 1.3.6.1.4.1.434.2.2.4.16.9.1.17 | ||
| The method used for dialing. | |||
| OBJECT-TYPE | |||
| INTEGER | dtmf(1), pulse(2) | ||
| dialerV32BisRetry | 1.3.6.1.4.1.434.2.2.4.16.9.1.18 | ||
| Indicates whether or not the dialer will try to redial a number that is busy or does not answer. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerV32BisCallFailure | 1.3.6.1.4.1.434.2.2.4.16.9.1.19 | ||
| Reason for last call failure. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisCarrierDetect | 1.3.6.1.4.1.434.2.2.4.16.9.1.20 | ||
| Delay in msec to wait for verification of carrier detect. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisCarrierWait | 1.3.6.1.4.1.434.2.2.4.16.9.1.21 | ||
| Delay in msec to wait for carrier detect. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisHangupVerify | 1.3.6.1.4.1.434.2.2.4.16.9.1.22 | ||
| Delay in msec to wait to verify for hangup. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisHangupSignal | 1.3.6.1.4.1.434.2.2.4.16.9.1.23 | ||
| Hangup signal state. | |||
| OBJECT-TYPE | |||
| DisEnable | |||
| dialerV32BisTxLevel | 1.3.6.1.4.1.434.2.2.4.16.9.1.24 | ||
| The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisRxLevel | 1.3.6.1.4.1.434.2.2.4.16.9.1.25 | ||
| Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisGuardTone | 1.3.6.1.4.1.434.2.2.4.16.9.1.26 | ||
| Indicates a guard tone frequency. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisLeasedLine | 1.3.6.1.4.1.434.2.2.4.16.9.1.27 | ||
| Dial or leased line. | |||
| OBJECT-TYPE | |||
| INTEGER | two-w-ll(1), four-w-ll(2) | ||
| dialerV32BisLeaseMode | 1.3.6.1.4.1.434.2.2.4.16.9.1.28 | ||
| This applies to Leased line type only. This field states whether the dialer will go off-hook in Originate or Answer mode. | |||
| OBJECT-TYPE | |||
| INTEGER | answer(1), originate(2) | ||
| dialerV32BisLLTxLevel | 1.3.6.1.4.1.434.2.2.4.16.9.1.29 | ||
| The attenuation level (Db) on data transmission once the handshake is completed with the remote modem (for leased line). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisLLConfig | 1.3.6.1.4.1.434.2.2.4.16.9.1.30 | ||
| Leased line configuration | |||
| OBJECT-TYPE | |||
| PrimCfg | |||
| dialerV32BisLLBitRate | 1.3.6.1.4.1.434.2.2.4.16.9.1.31 | ||
| Leased line bit rate. | |||
| OBJECT-TYPE | |||
| PrimBitRate | |||
| dialerV32BisCallingTone | 1.3.6.1.4.1.434.2.2.4.16.9.1.32 | ||
| Calling tone state. | |||
| OBJECT-TYPE | |||
| DisEnable | |||
| dialerV32BisAutoMode | 1.3.6.1.4.1.434.2.2.4.16.9.1.33 | ||
| Auto mode state (fallback/forward). | |||
| OBJECT-TYPE | |||
| DisEnable | |||
| dialerV32BisRetryAllowed | 1.3.6.1.4.1.434.2.2.4.16.9.1.34 | ||
| Indicates whether or not the dialer will try to redial a number that is busy or does not answer. | |||
| OBJECT-TYPE | |||
| DisEnable | |||
| dialerV32BisMaxRetry | 1.3.6.1.4.1.434.2.2.4.16.9.1.35 | ||
| Specifies how many times a number will be redialed if it is busy or otherwise unresponsive. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisDialTone | 1.3.6.1.4.1.434.2.2.4.16.9.1.36 | ||
| The dial tone state. | |||
| OBJECT-TYPE | |||
| DisEnable | |||
| dialerV32BisDialToneWait | 1.3.6.1.4.1.434.2.2.4.16.9.1.37 | ||
| The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisRetryWait | 1.3.6.1.4.1.434.2.2.4.16.9.1.38 | ||
| Retry timer delay. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisHangupWait | 1.3.6.1.4.1.434.2.2.4.16.9.1.39 | ||
| Hangup timer delay. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisDialPauseWait | 1.3.6.1.4.1.434.2.2.4.16.9.1.40 | ||
| maximum delay before dial. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisDeltaRiWait | 1.3.6.1.4.1.434.2.2.4.16.9.1.41 | ||
| Maximum delay (msec) between 2 rings. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisDTMFDuration | 1.3.6.1.4.1.434.2.2.4.16.9.1.42 | ||
| The tone duration (msec) used in DMTF dialing. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisDTMFDelay | 1.3.6.1.4.1.434.2.2.4.16.9.1.43 | ||
| The delay (msec) between digits dialed when in tone dial mode. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisDTMFFreq1Level | 1.3.6.1.4.1.434.2.2.4.16.9.1.44 | ||
| DTMF high frequency power level. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisDTMFFreq2Level | 1.3.6.1.4.1.434.2.2.4.16.9.1.45 | ||
| DTMF low frequency power level. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisPulseMakeTime | 1.3.6.1.4.1.434.2.2.4.16.9.1.46 | ||
| Pulse make time (msec). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisPulseBreakTime | 1.3.6.1.4.1.434.2.2.4.16.9.1.47 | ||
| Pulse break time (msec). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisPulseDelay | 1.3.6.1.4.1.434.2.2.4.16.9.1.48 | ||
| Pulse interdigit delay (msec). | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisSpeakerLevel | 1.3.6.1.4.1.434.2.2.4.16.9.1.49 | ||
| The volume level of the Eiconcard's speaker. | |||
| OBJECT-TYPE | |||
| INTEGER | low(1), high(2) | ||
| dialerV32BisRiToAnswer | 1.3.6.1.4.1.434.2.2.4.16.9.1.50 | ||
| Number of rings befor answering. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerV32BisAnswerBitRate | 1.3.6.1.4.1.434.2.2.4.16.9.1.51 | ||
| Answer bit rate. | |||
| OBJECT-TYPE | |||
| PrimBitRate | |||
| dialerV32BisAnswerConfig | 1.3.6.1.4.1.434.2.2.4.16.9.1.52 | ||
| Answer configuration. | |||
| OBJECT-TYPE | |||
| PrimCfg | |||
| dialerV32BisRetrain | 1.3.6.1.4.1.434.2.2.4.16.9.1.53 | ||
| . | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisEqmLevel | 1.3.6.1.4.1.434.2.2.4.16.9.1.54 | ||
| . | |||
| OBJECT-TYPE | |||
| INTEGER | disable(1), low-quality(2), medium-quality(3), high-quality(4) | ||
| dialerV32BisRiOnOffDetect | 1.3.6.1.4.1.434.2.2.4.16.9.1.55 | ||
| Ring signal status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisCdDetect | 1.3.6.1.4.1.434.2.2.4.16.9.1.56 | ||
| Carrier detect status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisRingbackDetect | 1.3.6.1.4.1.434.2.2.4.16.9.1.57 | ||
| Ringback signal detect status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisAnswerDetect | 1.3.6.1.4.1.434.2.2.4.16.9.1.58 | ||
| Answer tone detect status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisBusyDetect | 1.3.6.1.4.1.434.2.2.4.16.9.1.59 | ||
| Busy tone detect status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisDiscDetect | 1.3.6.1.4.1.434.2.2.4.16.9.1.60 | ||
| Disconnect detect status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisCdSignal | 1.3.6.1.4.1.434.2.2.4.16.9.1.61 | ||
| CD signal status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisDsrSignal | 1.3.6.1.4.1.434.2.2.4.16.9.1.62 | ||
| DSR signal status. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerV32BisState | 1.3.6.1.4.1.434.2.2.4.16.9.1.63 | ||
| State of the V32bis dialer: m-closed (1) - Dialer not active m-opened (2) - No connection establised m-local-test (3) - Local analog loopback m-ringing (4) - Incoming call present m-dialing (5) - Dialing a number m-answering (6) - Call answer in progress m-originating (7) - Call originate in progress m-retrying (8) - Awaiting call attempt m-connected (9) - connection present m-retraining (10) - performing retrain m-remote-test (11) - Remote digital loopback m-remote-disc (12) - Remote has disconnected m-local-disc (13) - Local has disconnected m-hangup-idle (14) - Idle after hangup m-closing (15) - Awaiting local disconnect m-offhook-idle (16) - Modem goes off hook on command | |||
| OBJECT-TYPE | |||
| INTEGER | m-closed(1), m-opened(2), m-local-test(3), m-ringing(4), m-dialing(5), m-answering(6), m-originating(7), m-retrying(8), m-connected(9), m-retraining(10), m-remote-test(11), m-remote-disc(12), m-local-disc(13), m-hangup-idle(14), m-closing(15), m-offhook-idle(16) | ||
| dialerControlTable | 1.3.6.1.4.1.434.2.2.4.16.10 | ||
| The table for dynamic dialing entries. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerControlEntry | |||
| dialerControlEntry | 1.3.6.1.4.1.434.2.2.4.16.10.1 | ||
| The set of attributes for one entry per port. | |||
| OBJECT-TYPE | |||
| DialerControlEntry | |||
| dialerCtrlPortRef | 1.3.6.1.4.1.434.2.2.4.16.10.1.1 | ||
| The Port number of the dialer. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerCtrlAction | 1.3.6.1.4.1.434.2.2.4.16.10.1.2 | ||
| The Action states. exec (1) - This action executes the script file which would be set in dialerCtrlScriptFile. dial (2) - This action dials the number stored in dialerCtrlMainNumber. if dialerCtrlMainNumber is not set then the dialerCtrlPrimary number is dialed by the dialer. ISDN dialer dials the number stored by the card. hangup (3) - This action hangs-up the current connection. store (6) - This action stores the parameters in the card. ISDN dialer only. | |||
| OBJECT-TYPE | |||
| INTEGER | exec(1), dial(2), hangup(3), start(4), idle(5), store(6), other(7) | ||
| dialerCtrlAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.10.1.3 | ||
| States whether or not the dialer answers incoming calls. | |||
| OBJECT-TYPE | |||
| FalseTrue | |||
| dialerCtrlDirectDSROnOff | 1.3.6.1.4.1.434.2.2.4.16.10.1.4 | ||
| Defines the setting of the Data Rate Select signal. Setting this mib is valid only if the dialer type is Direct and the interface is RS-232. | |||
| OBJECT-TYPE | |||
| OnOff | |||
| dialerCtrlNumber | 1.3.6.1.4.1.434.2.2.4.16.10.1.5 | ||
| The primary Phone Number | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerCtrlScriptFile | 1.3.6.1.4.1.434.2.2.4.16.10.1.6 | ||
| The Complete path where the Dialer Script file resides. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..80) | ||
| dialerCtrlActionState | 1.3.6.1.4.1.434.2.2.4.16.10.1.7 | ||
| The state of the action operation performed by the Agent as a result of setting the values to the dialerCtrlAction. The Management station will poll that variable after initiating an action. The value done(1) indicates that the action terminated successfully. The value failed(2) indicates that the action terminated with an error. The variable dialerCtrlActionError indicates the error code. | |||
| OBJECT-TYPE | |||
| ActionState | |||
| dialerCtrlActionError | 1.3.6.1.4.1.434.2.2.4.16.10.1.8 | ||
| If the value is 0, this means no error. Otherwise, the value indicates the error code returned after the action operation. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerCtrlConfig | 1.3.6.1.4.1.434.2.2.4.16.10.1.9 | ||
| The config to which the V32 dialer will have to be set. This information is only used when using a V32 dialer. | |||
| OBJECT-TYPE | |||
| PrimCfg | |||
| dialerCtrlBitRate | 1.3.6.1.4.1.434.2.2.4.16.10.1.10 | ||
| The Bit Rate to which the V32 dialer will have to be set. This information is only used when using a V32 dialer. | |||
| OBJECT-TYPE | |||
| PrimBitRate | |||
| dialerCtrlType | 1.3.6.1.4.1.434.2.2.4.16.10.1.11 | ||
| The remote directory number type. Used by ISDN dialer only. DEFINED ONLY FOR TESTS. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerCtrlPlan | 1.3.6.1.4.1.434.2.2.4.16.10.1.12 | ||
| The remote directory number plan. Used by ISDN dialer only. DEFINED ONLY FOR TESTS. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerCtrlSub | 1.3.6.1.4.1.434.2.2.4.16.10.1.13 | ||
| The remote subaddress. When in the connected state, the remote subaddress dialer is displayed. Otherwise, the stored subaddress is displayed. Used by ISDN dialer only. DEFINED ONLY FOR TESTS. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerCtrlSubType | 1.3.6.1.4.1.434.2.2.4.16.10.1.14 | ||
| The local subaddress type. Used by ISDN dialer only. DEFINED ONLY FOR TESTS. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerCtrlTns | 1.3.6.1.4.1.434.2.2.4.16.10.1.15 | ||
| The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits and is assigned by Bellcore. Used by ISDN dialer only. DEFINED ONLY FOR TESTS. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..16) | ||
| dialerCtrlNumberTemp | 1.3.6.1.4.1.434.2.2.4.16.10.1.16 | ||
| The temporary Phone Number. DEFINED ONLY FOR ISDN TESTS. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..50) | ||
| dialerCtrlDialMask | 1.3.6.1.4.1.434.2.2.4.16.10.1.17 | ||
| Read the mask state. DEFINED ONLY FOR TESTS. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerCtrlCallSpeed | 1.3.6.1.4.1.434.2.2.4.16.10.1.18 | ||
| Read the mask state. DEFINED ONLY FOR TESTS. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnStatusTable | 1.3.6.1.4.1.434.2.2.4.16.11 | ||
| The table for ISDN dialer Status. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnStatusEntry | |||
| dialerIsdnStatusEntry | 1.3.6.1.4.1.434.2.2.4.16.11.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnStatusEntry | |||
| dialerIsdnStatusPortRef | 1.3.6.1.4.1.434.2.2.4.16.11.1.1 | ||
| The port number for which isdn status is displayed. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnStatusSwitchType | 1.3.6.1.4.1.434.2.2.4.16.11.1.2 | ||
| The current switch type in use for isdn. | |||
| OBJECT-TYPE | |||
| INTEGER | ni1(1), nt(2), att(3), tr6(4), vn3(5), net3(6), tph(7), illegal(8) | ||
| dialerIsdnStatusChType | 1.3.6.1.4.1.434.2.2.4.16.11.1.3 | ||
| The isdn channel type, B channel or D channel. | |||
| OBJECT-TYPE | |||
| INTEGER | b-channel(1), d-channel(2), illegal(3), unused(4) | ||
| dialerIsdnStatusL1State | 1.3.6.1.4.1.434.2.2.4.16.11.1.4 | ||
| The current state of layer 1 subsystem. | |||
| OBJECT-TYPE | |||
| INTEGER | deactivated(1), await-info2(2), await-info4(3), activate(4), illegal(5) | ||
| dialerIsdnStatusState | 1.3.6.1.4.1.434.2.2.4.16.11.1.5 | ||
| The current state of the ISDN dialer. | |||
| OBJECT-TYPE | |||
| INTEGER | isdn-deact-closed(1), isdn-deact-opened(2), isdn-wait-act-closed(3), isdn-wait-act-opened(4), isdn-release-closed(5), isdn-release-opened(6), isdn-closed(7), isdn-opened(8), isdn-connecting(9), isdn-connected(10), isdn-ringing(11), isdn-disconnecting(12), isdn-closing(13), isdn-loopback(14), isdn-linking-deact(15), isdn-linking-act(16), isdn-test(17), isdn-linking-ring(18), isdn-illegal(19) | ||
| dialerIsdnNI1BChTable | 1.3.6.1.4.1.434.2.2.4.16.12 | ||
| The table for the ISDN NI1 BChannel dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnNI1BChEntry | |||
| dialerIsdnNI1BChEntry | 1.3.6.1.4.1.434.2.2.4.16.12.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnNI1BChEntry | |||
| dialerIsdnNI1BChPortRef | 1.3.6.1.4.1.434.2.2.4.16.12.1.1 | ||
| The port number which is configured for NI1-BChannel. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnNI1BChSpid | 1.3.6.1.4.1.434.2.2.4.16.12.1.2 | ||
| The Terminal's Service Profile IDentification. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNI1BChSpidStatus | 1.3.6.1.4.1.434.2.2.4.16.12.1.3 | ||
| The current SPID status. | |||
| OBJECT-TYPE | |||
| IsdnSpidStatus | |||
| dialerIsdnNI1BChLocalDn | 1.3.6.1.4.1.434.2.2.4.16.12.1.4 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNI1BChLocalSub | 1.3.6.1.4.1.434.2.2.4.16.12.1.5 | ||
| The local subaddress. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNI1BChTnsDigs | 1.3.6.1.4.1.434.2.2.4.16.12.1.6 | ||
| The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits and is assigned by Bellcore. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..16) | ||
| dialerIsdnNI1BChRemoteDn | 1.3.6.1.4.1.434.2.2.4.16.12.1.7 | ||
| When in the connected state, the number dialed is displayed. Otherwise, the stored number is displayed. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNI1BChRemoteSub | 1.3.6.1.4.1.434.2.2.4.16.12.1.8 | ||
| When in the connected state, the remote subaddress dialer is displayed. Otherwise, the stored subaddress is displayed. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNI1BChCallType | 1.3.6.1.4.1.434.2.2.4.16.12.1.9 | ||
| The current call type. | |||
| OBJECT-TYPE | |||
| IsdnCallType | |||
| dialerIsdnNI1BChCallSpeed | 1.3.6.1.4.1.434.2.2.4.16.12.1.10 | ||
| The current call speed. | |||
| OBJECT-TYPE | |||
| IsdnCallSpeed | |||
| dialerIsdnNI1BChBChannel | 1.3.6.1.4.1.434.2.2.4.16.12.1.11 | ||
| The current B channel connected to. | |||
| OBJECT-TYPE | |||
| IsdnBChannels | |||
| dialerIsdnNI1BChAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.12.1.12 | ||
| Answer Enable Status. | |||
| OBJECT-TYPE | |||
| IsdnAnsEnable | |||
| dialerIsdnNI1BChCcState | 1.3.6.1.4.1.434.2.2.4.16.12.1.13 | ||
| The state of call control subsystem. | |||
| OBJECT-TYPE | |||
| IsdnNI1BCcState | |||
| dialerIsdnNI1BChCcNbCause | 1.3.6.1.4.1.434.2.2.4.16.12.1.14 | ||
| The number of causes saved. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1BChCcCause | 1.3.6.1.4.1.434.2.2.4.16.12.1.15 | ||
| Last causes saved. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..10) | ||
| dialerIsdnNI1BChL3State | 1.3.6.1.4.1.434.2.2.4.16.12.1.16 | ||
| The state of layer 3 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL3State | |||
| dialerIsdnNI1BChL2State | 1.3.6.1.4.1.434.2.2.4.16.12.1.17 | ||
| The state of layer 2 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL2State | |||
| dialerIsdnNI1BChTeiValue | 1.3.6.1.4.1.434.2.2.4.16.12.1.18 | ||
| The value of the terminal is dynamic TEI. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1BChTeiStatus | 1.3.6.1.4.1.434.2.2.4.16.12.1.19 | ||
| The status of the terminal's dynamic TEI. | |||
| OBJECT-TYPE | |||
| IsdnTeiStatus | |||
| dialerIsdnNI1BChLocalDnType | 1.3.6.1.4.1.434.2.2.4.16.12.1.20 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnNI1BChLocalDnPlan | 1.3.6.1.4.1.434.2.2.4.16.12.1.21 | ||
| The local directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnNI1BChLocalSubType | 1.3.6.1.4.1.434.2.2.4.16.12.1.22 | ||
| The local subaddress type. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerIsdnNI1BChTnsNetId | 1.3.6.1.4.1.434.2.2.4.16.12.1.23 | ||
| The transit network id. | |||
| OBJECT-TYPE | |||
| IsdnTnsNetId | |||
| dialerIsdnNI1BChTnsIdPlan | 1.3.6.1.4.1.434.2.2.4.16.12.1.24 | ||
| The transit network plan. | |||
| OBJECT-TYPE | |||
| IsdnTnsIdPlan | |||
| dialerIsdnNI1BChRemoteDnType | 1.3.6.1.4.1.434.2.2.4.16.12.1.25 | ||
| The remote directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnNI1BChRemoteDnPlan | 1.3.6.1.4.1.434.2.2.4.16.12.1.26 | ||
| The remote directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnNI1BChRemoteSubType | 1.3.6.1.4.1.434.2.2.4.16.12.1.27 | ||
| The local subaddress type. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerIsdnNI1BChScrStatus | 1.3.6.1.4.1.434.2.2.4.16.12.1.28 | ||
| The status of call screening. | |||
| OBJECT-TYPE | |||
| IsdnScrStatus | |||
| dialerIsdnNI1BChCallOpt | 1.3.6.1.4.1.434.2.2.4.16.12.1.29 | ||
| The current call option. | |||
| OBJECT-TYPE | |||
| IsdnCallOpt | |||
| dialerIsdnNI1BChStoDefined | 1.3.6.1.4.1.434.2.2.4.16.12.1.30 | ||
| The validity of sto- elements. | |||
| OBJECT-TYPE | |||
| IsdnStoDefined | |||
| dialerIsdnNI1BChStoDnType | 1.3.6.1.4.1.434.2.2.4.16.12.1.31 | ||
| The stored directory number type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1BChStoDnPlan | 1.3.6.1.4.1.434.2.2.4.16.12.1.32 | ||
| The stored directory number plan. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1BChStoDn | 1.3.6.1.4.1.434.2.2.4.16.12.1.33 | ||
| The stored directory number. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNI1BChStoSubType | 1.3.6.1.4.1.434.2.2.4.16.12.1.34 | ||
| The stored subaddress type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1BChStoSub | 1.3.6.1.4.1.434.2.2.4.16.12.1.35 | ||
| The stored subaddress. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNI1BChStoTnsNetId | 1.3.6.1.4.1.434.2.2.4.16.12.1.36 | ||
| The stored transit network id. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1BChStoTnsPlan | 1.3.6.1.4.1.434.2.2.4.16.12.1.37 | ||
| The stored transit network plan. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1BChStoDigs | 1.3.6.1.4.1.434.2.2.4.16.12.1.38 | ||
| The stored transit network address. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..16) | ||
| dialerIsdnNI1BChStoBcType | 1.3.6.1.4.1.434.2.2.4.16.12.1.39 | ||
| The stored bearer cap. type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1BChStoBcOpt | 1.3.6.1.4.1.434.2.2.4.16.12.1.40 | ||
| The stored bearer cap. option. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1DChTable | 1.3.6.1.4.1.434.2.2.4.16.13 | ||
| The table for the ISDN NI1 DChannel dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnNI1DChEntry | |||
| dialerIsdnNI1DChEntry | 1.3.6.1.4.1.434.2.2.4.16.13.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnNI1DChEntry | |||
| dialerIsdnNI1DChPortRef | 1.3.6.1.4.1.434.2.2.4.16.13.1.1 | ||
| The port number configured for the NI1 DChannel. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnNI1DChTeiValue | 1.3.6.1.4.1.434.2.2.4.16.13.1.2 | ||
| The static TEI value on the D Channel for data communications. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNI1DChTeiStatus | 1.3.6.1.4.1.434.2.2.4.16.13.1.3 | ||
| The status of TEI - always ASSIGNED. | |||
| OBJECT-TYPE | |||
| IsdnTeiStatus | |||
| dialerIsdnNI1DChL2State | 1.3.6.1.4.1.434.2.2.4.16.13.1.4 | ||
| The current layer 2 state. | |||
| OBJECT-TYPE | |||
| IsdnL2State | |||
| dialerIsdnNI1DChP3State | 1.3.6.1.4.1.434.2.2.4.16.13.1.5 | ||
| The current Packet layer state. | |||
| OBJECT-TYPE | |||
| IsdnP3State | |||
| dialerIsdnNI1DChActState | 1.3.6.1.4.1.434.2.2.4.16.13.1.6 | ||
| The current activation FSM state. | |||
| OBJECT-TYPE | |||
| IsdnActState | |||
| dialerIsdnTR6BChTable | 1.3.6.1.4.1.434.2.2.4.16.14 | ||
| The table for the ISDN TR6 BChannel dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnTR6BChEntry | |||
| dialerIsdnTR6BChEntry | 1.3.6.1.4.1.434.2.2.4.16.14.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnTR6BChEntry | |||
| dialerIsdnTR6BChPortRef | 1.3.6.1.4.1.434.2.2.4.16.14.1.1 | ||
| The port number for which the 1TR6 BChannel info is displayed. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnTR6BChLocalDn | 1.3.6.1.4.1.434.2.2.4.16.14.1.2 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTR6BChRemoteDn | 1.3.6.1.4.1.434.2.2.4.16.14.1.3 | ||
| When in the connected state, the number dialed is displayed. Otherwise, the stored number is displayed. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTR6BChCallType | 1.3.6.1.4.1.434.2.2.4.16.14.1.4 | ||
| The current call type. | |||
| OBJECT-TYPE | |||
| IsdnCallType | |||
| dialerIsdnTR6BChCallSpeed | 1.3.6.1.4.1.434.2.2.4.16.14.1.5 | ||
| The current call speed. | |||
| OBJECT-TYPE | |||
| IsdnCallSpeed | |||
| dialerIsdnTR6BChBChannel | 1.3.6.1.4.1.434.2.2.4.16.14.1.6 | ||
| The current B Channel connected to. | |||
| OBJECT-TYPE | |||
| IsdnBChannels | |||
| dialerIsdnTR6BChAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.14.1.7 | ||
| Answer enable status. | |||
| OBJECT-TYPE | |||
| IsdnAnsEnable | |||
| dialerIsdnTR6BChCcState | 1.3.6.1.4.1.434.2.2.4.16.14.1.8 | ||
| The state of call control subsystem. | |||
| OBJECT-TYPE | |||
| IsdnTR6BCcState | |||
| dialerIsdnTR6BChCcNbCause | 1.3.6.1.4.1.434.2.2.4.16.14.1.9 | ||
| The number of causes saved. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTR6BChCcCause | 1.3.6.1.4.1.434.2.2.4.16.14.1.10 | ||
| Last causes saved. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..10) | ||
| dialerIsdnTR6BChL3State | 1.3.6.1.4.1.434.2.2.4.16.14.1.11 | ||
| The state of layer 3 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL3State | |||
| dialerIsdnTR6BChL2State | 1.3.6.1.4.1.434.2.2.4.16.14.1.12 | ||
| The state of layer 2 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL2State | |||
| dialerIsdnTR6BChLocalDnType | 1.3.6.1.4.1.434.2.2.4.16.14.1.13 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnTR6BChLocalDnPlan | 1.3.6.1.4.1.434.2.2.4.16.14.1.14 | ||
| The local directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnTR6BChRemoteDnType | 1.3.6.1.4.1.434.2.2.4.16.14.1.15 | ||
| The remote directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnTR6BChRemoteDnPlan | 1.3.6.1.4.1.434.2.2.4.16.14.1.16 | ||
| The remote directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnTR6BChScrStatus | 1.3.6.1.4.1.434.2.2.4.16.14.1.17 | ||
| The status of call screening. | |||
| OBJECT-TYPE | |||
| IsdnScrStatus | |||
| dialerIsdnTR6BChCallOpt | 1.3.6.1.4.1.434.2.2.4.16.14.1.18 | ||
| The current call option. | |||
| OBJECT-TYPE | |||
| IsdnCallOpt | |||
| dialerIsdnTR6BChTeiValue | 1.3.6.1.4.1.434.2.2.4.16.14.1.19 | ||
| The static TEI value on the D Channel for data communications. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTR6BChTeiStatus | 1.3.6.1.4.1.434.2.2.4.16.14.1.20 | ||
| The status of TEI - always ASSIGNED. | |||
| OBJECT-TYPE | |||
| IsdnTeiStatus | |||
| dialerIsdnTR6BChStoDefined | 1.3.6.1.4.1.434.2.2.4.16.14.1.21 | ||
| The validity of sto- elements. | |||
| OBJECT-TYPE | |||
| IsdnStoDefined | |||
| dialerIsdnTR6BChStoDnType | 1.3.6.1.4.1.434.2.2.4.16.14.1.22 | ||
| The stored directory number type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTR6BChStoDnPlan | 1.3.6.1.4.1.434.2.2.4.16.14.1.23 | ||
| The stored directory number plan. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTR6BChStoDn | 1.3.6.1.4.1.434.2.2.4.16.14.1.24 | ||
| The stored directory number. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTR6BChStoBcType | 1.3.6.1.4.1.434.2.2.4.16.14.1.25 | ||
| The stored bearer cap. type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTR6BChStoBcOpt | 1.3.6.1.4.1.434.2.2.4.16.14.1.26 | ||
| The stored bearer cap. option. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3BChTable | 1.3.6.1.4.1.434.2.2.4.16.15 | ||
| The table for the ISDN VN3 BChannel dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnVN3BChEntry | |||
| dialerIsdnVN3BChEntry | 1.3.6.1.4.1.434.2.2.4.16.15.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnVN3BChEntry | |||
| dialerIsdnVN3BChPortRef | 1.3.6.1.4.1.434.2.2.4.16.15.1.1 | ||
| The port number for which the VN3 BChannel info is displayed. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnVN3BChLocalDnType | 1.3.6.1.4.1.434.2.2.4.16.15.1.2 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnVN3BChLocalDnPlan | 1.3.6.1.4.1.434.2.2.4.16.15.1.3 | ||
| The local directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnVN3BChLocalDn | 1.3.6.1.4.1.434.2.2.4.16.15.1.4 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnVN3BChLocalSubType | 1.3.6.1.4.1.434.2.2.4.16.15.1.5 | ||
| The local subaddress type. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerIsdnVN3BChLocalSub | 1.3.6.1.4.1.434.2.2.4.16.15.1.6 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnVN3BChRemoteDnType | 1.3.6.1.4.1.434.2.2.4.16.15.1.7 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnVN3BChRemoteDnPlan | 1.3.6.1.4.1.434.2.2.4.16.15.1.8 | ||
| The local directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnVN3BChRemoteDn | 1.3.6.1.4.1.434.2.2.4.16.15.1.9 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnVN3BChRemoteSubType | 1.3.6.1.4.1.434.2.2.4.16.15.1.10 | ||
| The local subaddress type. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerIsdnVN3BChRemoteSub | 1.3.6.1.4.1.434.2.2.4.16.15.1.11 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnVN3BChCallType | 1.3.6.1.4.1.434.2.2.4.16.15.1.12 | ||
| The current call type. | |||
| OBJECT-TYPE | |||
| IsdnCallType | |||
| dialerIsdnVN3BChCallSpeed | 1.3.6.1.4.1.434.2.2.4.16.15.1.13 | ||
| The current call speed. | |||
| OBJECT-TYPE | |||
| IsdnCallSpeed | |||
| dialerIsdnVN3BChBChannel | 1.3.6.1.4.1.434.2.2.4.16.15.1.14 | ||
| The current B Channel connected to. | |||
| OBJECT-TYPE | |||
| IsdnBChannels | |||
| dialerIsdnVN3BChAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.15.1.15 | ||
| Answer enable status. | |||
| OBJECT-TYPE | |||
| IsdnAnsEnable | |||
| dialerIsdnVN3BChScrStatus | 1.3.6.1.4.1.434.2.2.4.16.15.1.16 | ||
| The status of call screening. | |||
| OBJECT-TYPE | |||
| IsdnScrStatus | |||
| dialerIsdnVN3BChCallOpt | 1.3.6.1.4.1.434.2.2.4.16.15.1.17 | ||
| The current call option. | |||
| OBJECT-TYPE | |||
| IsdnCallOpt | |||
| dialerIsdnVN3BChCcState | 1.3.6.1.4.1.434.2.2.4.16.15.1.18 | ||
| The state of call control subsystem. | |||
| OBJECT-TYPE | |||
| IsdnVN3BCcState | |||
| dialerIsdnVN3BChCcNbCause | 1.3.6.1.4.1.434.2.2.4.16.15.1.19 | ||
| The number of causes saved. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3BChCcCause | 1.3.6.1.4.1.434.2.2.4.16.15.1.20 | ||
| Last causes saved. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..10) | ||
| dialerIsdnVN3BChL3State | 1.3.6.1.4.1.434.2.2.4.16.15.1.21 | ||
| The state of layer 3 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL3State | |||
| dialerIsdnVN3BChL2State | 1.3.6.1.4.1.434.2.2.4.16.15.1.22 | ||
| The state of layer 2 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL2State | |||
| dialerIsdnVN3BChTeiValue | 1.3.6.1.4.1.434.2.2.4.16.15.1.23 | ||
| The static TEI value on the D Channel for data communications. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3BChTeiStatus | 1.3.6.1.4.1.434.2.2.4.16.15.1.24 | ||
| The status of TEI - always ASSIGNED. | |||
| OBJECT-TYPE | |||
| IsdnTeiStatus | |||
| dialerIsdnVN3BChStoDefined | 1.3.6.1.4.1.434.2.2.4.16.15.1.25 | ||
| The validity of sto- elements. | |||
| OBJECT-TYPE | |||
| IsdnStoDefined | |||
| dialerIsdnVN3BChStoDnType | 1.3.6.1.4.1.434.2.2.4.16.15.1.26 | ||
| The stored directory number type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3BChStoDnPlan | 1.3.6.1.4.1.434.2.2.4.16.15.1.27 | ||
| The stored directory number plan. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3BChStoDn | 1.3.6.1.4.1.434.2.2.4.16.15.1.28 | ||
| The stored directory number. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnVN3BChStoSubType | 1.3.6.1.4.1.434.2.2.4.16.15.1.29 | ||
| The stored subaddress type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3BChStoSub | 1.3.6.1.4.1.434.2.2.4.16.15.1.30 | ||
| The stored subaddress. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnVN3BChStoBcType | 1.3.6.1.4.1.434.2.2.4.16.15.1.31 | ||
| The stored bearer cap type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3BChStoBcOpt | 1.3.6.1.4.1.434.2.2.4.16.15.1.32 | ||
| The stored bearer cap option. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3DChTable | 1.3.6.1.4.1.434.2.2.4.16.16 | ||
| The table for the ISDN VN3 DChannel dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnVN3DChEntry | |||
| dialerIsdnVN3DChEntry | 1.3.6.1.4.1.434.2.2.4.16.16.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnVN3DChEntry | |||
| dialerIsdnVN3DChPortRef | 1.3.6.1.4.1.434.2.2.4.16.16.1.1 | ||
| The port number for which the VN3 DChannel info is displayed. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnVN3DChTeiValue | 1.3.6.1.4.1.434.2.2.4.16.16.1.2 | ||
| The static TEI value on the D Channel for data communications. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnVN3DChTeiStatus | 1.3.6.1.4.1.434.2.2.4.16.16.1.3 | ||
| The status of TEI - always ASSIGNED. | |||
| OBJECT-TYPE | |||
| IsdnTeiStatus | |||
| dialerIsdnVN3DChL2State | 1.3.6.1.4.1.434.2.2.4.16.16.1.4 | ||
| The state of layer 2 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL2State | |||
| dialerIsdnVN3DChP3State | 1.3.6.1.4.1.434.2.2.4.16.16.1.5 | ||
| The current Packet layer state. | |||
| OBJECT-TYPE | |||
| IsdnP3State | |||
| dialerIsdnNET3BChTable | 1.3.6.1.4.1.434.2.2.4.16.17 | ||
| The table for the ISDN NET3 BChannel dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnNET3BChEntry | |||
| dialerIsdnNET3BChEntry | 1.3.6.1.4.1.434.2.2.4.16.17.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnNET3BChEntry | |||
| dialerIsdnNET3BChPortRef | 1.3.6.1.4.1.434.2.2.4.16.17.1.1 | ||
| The port number for which the NET3 BChannel info is displayed. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnNET3BChLocalDnType | 1.3.6.1.4.1.434.2.2.4.16.17.1.2 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnNET3BChLocalDnPlan | 1.3.6.1.4.1.434.2.2.4.16.17.1.3 | ||
| The local directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnNET3BChLocalDn | 1.3.6.1.4.1.434.2.2.4.16.17.1.4 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNET3BChLocalSubType | 1.3.6.1.4.1.434.2.2.4.16.17.1.5 | ||
| The local subaddress type. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerIsdnNET3BChLocalSub | 1.3.6.1.4.1.434.2.2.4.16.17.1.6 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNET3BChRemoteDnType | 1.3.6.1.4.1.434.2.2.4.16.17.1.7 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnNET3BChRemoteDnPlan | 1.3.6.1.4.1.434.2.2.4.16.17.1.8 | ||
| The local directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnNET3BChRemoteDn | 1.3.6.1.4.1.434.2.2.4.16.17.1.9 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNET3BChRemoteSubType | 1.3.6.1.4.1.434.2.2.4.16.17.1.10 | ||
| The local subaddress type. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerIsdnNET3BChRemoteSub | 1.3.6.1.4.1.434.2.2.4.16.17.1.11 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNET3BChCallType | 1.3.6.1.4.1.434.2.2.4.16.17.1.12 | ||
| The current call type. | |||
| OBJECT-TYPE | |||
| IsdnCallType | |||
| dialerIsdnNET3BChCallSpeed | 1.3.6.1.4.1.434.2.2.4.16.17.1.13 | ||
| The current call speed. | |||
| OBJECT-TYPE | |||
| IsdnCallSpeed | |||
| dialerIsdnNET3BChBChannel | 1.3.6.1.4.1.434.2.2.4.16.17.1.14 | ||
| The current B Channel connected to. | |||
| OBJECT-TYPE | |||
| IsdnBChannels | |||
| dialerIsdnNET3BChAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.17.1.15 | ||
| Answer enable status. | |||
| OBJECT-TYPE | |||
| IsdnAnsEnable | |||
| dialerIsdnNET3BChTnsNetId | 1.3.6.1.4.1.434.2.2.4.16.17.1.16 | ||
| The transit network id. | |||
| OBJECT-TYPE | |||
| IsdnTnsNetId | |||
| dialerIsdnNET3BChTnsIdPlan | 1.3.6.1.4.1.434.2.2.4.16.17.1.17 | ||
| The transit network plan. | |||
| OBJECT-TYPE | |||
| IsdnTnsIdPlan | |||
| dialerIsdnNET3BChTnsDigs | 1.3.6.1.4.1.434.2.2.4.16.17.1.18 | ||
| The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits and is assigned by Bellcore. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..16) | ||
| dialerIsdnNET3BChScrStatus | 1.3.6.1.4.1.434.2.2.4.16.17.1.19 | ||
| The status of call screening. | |||
| OBJECT-TYPE | |||
| IsdnScrStatus | |||
| dialerIsdnNET3BChCallOpt | 1.3.6.1.4.1.434.2.2.4.16.17.1.20 | ||
| The current call option. | |||
| OBJECT-TYPE | |||
| IsdnCallOpt | |||
| dialerIsdnNET3BChCcState | 1.3.6.1.4.1.434.2.2.4.16.17.1.21 | ||
| The state of call control subsystem. | |||
| OBJECT-TYPE | |||
| IsdnNET3BCcState | |||
| dialerIsdnNET3BChCcNbCause | 1.3.6.1.4.1.434.2.2.4.16.17.1.22 | ||
| The number of causes saved. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNET3BChCcCause | 1.3.6.1.4.1.434.2.2.4.16.17.1.23 | ||
| Last causes saved. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..10) | ||
| dialerIsdnNET3BChL3State | 1.3.6.1.4.1.434.2.2.4.16.17.1.24 | ||
| The state of layer 3 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL3State | |||
| dialerIsdnNET3BChL2State | 1.3.6.1.4.1.434.2.2.4.16.17.1.25 | ||
| The state of layer 2 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL2State | |||
| dialerIsdnNET3BChTeiValue | 1.3.6.1.4.1.434.2.2.4.16.17.1.26 | ||
| The static TEI value on the D Channel for data communications. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNET3BChTeiStatus | 1.3.6.1.4.1.434.2.2.4.16.17.1.27 | ||
| The status of TEI - always ASSIGNED. | |||
| OBJECT-TYPE | |||
| IsdnTeiStatus | |||
| dialerIsdnNET3BChStoDefined | 1.3.6.1.4.1.434.2.2.4.16.17.1.28 | ||
| The validity of sto- elements. | |||
| OBJECT-TYPE | |||
| IsdnStoDefined | |||
| dialerIsdnNET3BChStoDnType | 1.3.6.1.4.1.434.2.2.4.16.17.1.29 | ||
| The stored directory number type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNET3BChStoDnPlan | 1.3.6.1.4.1.434.2.2.4.16.17.1.30 | ||
| The stored directory number plan. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNET3BChStoDn | 1.3.6.1.4.1.434.2.2.4.16.17.1.31 | ||
| The stored directory number. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNET3BChStoSubType | 1.3.6.1.4.1.434.2.2.4.16.17.1.32 | ||
| The stored subaddress type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNET3BChStoSub | 1.3.6.1.4.1.434.2.2.4.16.17.1.33 | ||
| The stored subaddress. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnNET3BChStoTnsNetId | 1.3.6.1.4.1.434.2.2.4.16.17.1.34 | ||
| The stored transit network id. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNET3BChStoTnsPlan | 1.3.6.1.4.1.434.2.2.4.16.17.1.35 | ||
| The stored transit network plan. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNET3BChStoDigs | 1.3.6.1.4.1.434.2.2.4.16.17.1.36 | ||
| The stored transit network address. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..16) | ||
| dialerIsdnNET3BChStoBcType | 1.3.6.1.4.1.434.2.2.4.16.17.1.37 | ||
| The stored bearer cap. type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnNET3BChStoBcOpt | 1.3.6.1.4.1.434.2.2.4.16.17.1.38 | ||
| The stored bearer cap. option. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHBChTable | 1.3.6.1.4.1.434.2.2.4.16.18 | ||
| The table for the ISDN TPH BChannel dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnTPHBChEntry | |||
| dialerIsdnTPHBChEntry | 1.3.6.1.4.1.434.2.2.4.16.18.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnTPHBChEntry | |||
| dialerIsdnTPHBChPortRef | 1.3.6.1.4.1.434.2.2.4.16.18.1.1 | ||
| The port number for which the TPH BChannel info is displayed. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnTPHBChLocalDnType | 1.3.6.1.4.1.434.2.2.4.16.18.1.2 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnTPHBChLocalDnPlan | 1.3.6.1.4.1.434.2.2.4.16.18.1.3 | ||
| The local directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnTPHBChLocalDn | 1.3.6.1.4.1.434.2.2.4.16.18.1.4 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTPHBChLocalSubType | 1.3.6.1.4.1.434.2.2.4.16.18.1.5 | ||
| The local subaddress type. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerIsdnTPHBChLocalSub | 1.3.6.1.4.1.434.2.2.4.16.18.1.6 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTPHBChRemoteDnType | 1.3.6.1.4.1.434.2.2.4.16.18.1.7 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| IsdnDnType | |||
| dialerIsdnTPHBChRemoteDnPlan | 1.3.6.1.4.1.434.2.2.4.16.18.1.8 | ||
| The local directory number plan. | |||
| OBJECT-TYPE | |||
| IsdnDnPlan | |||
| dialerIsdnTPHBChRemoteDn | 1.3.6.1.4.1.434.2.2.4.16.18.1.9 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTPHBChRemoteSubType | 1.3.6.1.4.1.434.2.2.4.16.18.1.10 | ||
| The local subaddress type. | |||
| OBJECT-TYPE | |||
| IsdnSubType | |||
| dialerIsdnTPHBChRemoteSub | 1.3.6.1.4.1.434.2.2.4.16.18.1.11 | ||
| The local directory number type. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTPHBChCallType | 1.3.6.1.4.1.434.2.2.4.16.18.1.12 | ||
| The current call type. | |||
| OBJECT-TYPE | |||
| IsdnCallType | |||
| dialerIsdnTPHBChCallSpeed | 1.3.6.1.4.1.434.2.2.4.16.18.1.13 | ||
| The current call speed. | |||
| OBJECT-TYPE | |||
| IsdnCallSpeed | |||
| dialerIsdnTPHBChBChannel | 1.3.6.1.4.1.434.2.2.4.16.18.1.14 | ||
| The current B Channel connected to. | |||
| OBJECT-TYPE | |||
| IsdnBChannels | |||
| dialerIsdnTPHBChAnsEnable | 1.3.6.1.4.1.434.2.2.4.16.18.1.15 | ||
| Answer enable status. | |||
| OBJECT-TYPE | |||
| IsdnAnsEnable | |||
| dialerIsdnTPHBChScrStatus | 1.3.6.1.4.1.434.2.2.4.16.18.1.16 | ||
| The status of call screening. | |||
| OBJECT-TYPE | |||
| IsdnScrStatus | |||
| dialerIsdnTPHBChCallOpt | 1.3.6.1.4.1.434.2.2.4.16.18.1.17 | ||
| The current call option. | |||
| OBJECT-TYPE | |||
| IsdnCallOpt | |||
| dialerIsdnTPHBChCcState | 1.3.6.1.4.1.434.2.2.4.16.18.1.18 | ||
| The state of call control subsystem. | |||
| OBJECT-TYPE | |||
| IsdnTPHBCcState | |||
| dialerIsdnTPHBChCcNbCause | 1.3.6.1.4.1.434.2.2.4.16.18.1.19 | ||
| The number of causes saved. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHBChCcCause | 1.3.6.1.4.1.434.2.2.4.16.18.1.20 | ||
| Last causes saved. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..10) | ||
| dialerIsdnTPHBChL3State | 1.3.6.1.4.1.434.2.2.4.16.18.1.21 | ||
| The state of layer 3 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL3State | |||
| dialerIsdnTPHBChL2State | 1.3.6.1.4.1.434.2.2.4.16.18.1.22 | ||
| The state of layer 2 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL2State | |||
| dialerIsdnTPHBChTeiValue | 1.3.6.1.4.1.434.2.2.4.16.18.1.23 | ||
| The static TEI value on the D Channel for data communications. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHBChTeiStatus | 1.3.6.1.4.1.434.2.2.4.16.18.1.24 | ||
| The status of TEI - always ASSIGNED. | |||
| OBJECT-TYPE | |||
| IsdnTeiStatus | |||
| dialerIsdnTPHBChStoDefined | 1.3.6.1.4.1.434.2.2.4.16.18.1.25 | ||
| The validity of sto- elements. | |||
| OBJECT-TYPE | |||
| IsdnStoDefined | |||
| dialerIsdnTPHBChStoDnType | 1.3.6.1.4.1.434.2.2.4.16.18.1.26 | ||
| The stored directory number type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHBChStoDnPlan | 1.3.6.1.4.1.434.2.2.4.16.18.1.27 | ||
| The stored directory number plan. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHBChStoDn | 1.3.6.1.4.1.434.2.2.4.16.18.1.28 | ||
| The stored directory number. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTPHBChStoSubType | 1.3.6.1.4.1.434.2.2.4.16.18.1.29 | ||
| The stored subaddress type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHBChStoSub | 1.3.6.1.4.1.434.2.2.4.16.18.1.30 | ||
| The stored subaddress. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..21) | ||
| dialerIsdnTPHBChStoBcType | 1.3.6.1.4.1.434.2.2.4.16.18.1.31 | ||
| The stored bearer cap. type. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHBChStoBcOpt | 1.3.6.1.4.1.434.2.2.4.16.18.1.32 | ||
| The stored bearer cap. option. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHDChTable | 1.3.6.1.4.1.434.2.2.4.16.19 | ||
| The table for the ISDN TPH DChannel dialer. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DialerIsdnTPHDChEntry | |||
| dialerIsdnTPHDChEntry | 1.3.6.1.4.1.434.2.2.4.16.19.1 | ||
| The set of attributes for one port. | |||
| OBJECT-TYPE | |||
| DialerIsdnTPHDChEntry | |||
| dialerIsdnTPHDChPortRef | 1.3.6.1.4.1.434.2.2.4.16.19.1.1 | ||
| The port number for which the TPH DChannel info is displayed. | |||
| OBJECT-TYPE | |||
| PortRef | |||
| dialerIsdnTPHDChTeiValue | 1.3.6.1.4.1.434.2.2.4.16.19.1.2 | ||
| The static TEI value on the D Channel for data communications. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| dialerIsdnTPHDChTeiStatus | 1.3.6.1.4.1.434.2.2.4.16.19.1.3 | ||
| The status of TEI - always ASSIGNED. | |||
| OBJECT-TYPE | |||
| IsdnTeiStatus | |||
| dialerIsdnTPHDChL2State | 1.3.6.1.4.1.434.2.2.4.16.19.1.4 | ||
| The state of layer 2 subsystem. | |||
| OBJECT-TYPE | |||
| IsdnL2State | |||
| dialerIsdnTPHDChP3State | 1.3.6.1.4.1.434.2.2.4.16.19.1.5 | ||
| The current Packet layer state. | |||
| OBJECT-TYPE | |||
| IsdnP3State | |||
| PortRef | |||
| INTEGER | 1..48 | ||
| ActionState | |||
| INTEGER | done(1), failed(2), in-progress(3) | ||
| DataEncoding | |||
| INTEGER | nrz(1), nrzi(2), fm0(3), fm1(4) | ||
| ClockType | |||
| INTEGER | external(1), internal(2), ext-dpll(3), int-dpll(4) | ||
| OnOff | |||
| INTEGER | on(1), off(2) | ||
| FalseTrue | |||
| INTEGER | false(1), true(2) | ||
| DisEnable | |||
| INTEGER | disable(1), enable(2) | ||
| PrimBitRate | |||
| INTEGER | speed1200(1), speed2400(2), speed4800(3), speed7200(4), speed9600(5), speed12000(6), speed14400(7), not-supported(8) | ||
| PrimCfg | |||
| INTEGER | v22bis(1), v32(2), v32tcm(3), v32bis(4), not-supported(5) | ||
| IsdnSpidStatus | |||
| INTEGER | uninit(1), init(2), blocked(3), illegal(4) | ||
| IsdnDnType | |||
| INTEGER | unknown(1), international(2), national(3), net-specific(4), subscriber(5), abbreviated(6), illegal(7) | ||
| IsdnDnPlan | |||
| INTEGER | unknown(1), isdn-numbering(2), data-numbering(3), private-net(4), telex-numbering(5), nat-numbering(6), illegal(7) | ||
| IsdnSubType | |||
| INTEGER | nsap(1), user-specified(2), osi(3), illegal(4) | ||
| IsdnTnsNetId | |||
| INTEGER | user-specified(1), national(2), international(3), illegal(4) | ||
| IsdnTnsIdPlan | |||
| INTEGER | unknown(1), interlata(2), data(3), illegal(4) | ||
| IsdnCallType | |||
| INTEGER | circuit-switched(1), packet-switched(2), nailed-packet(3), circuit-spv(4), fax-3(5), fax-4(6), btx(7), teletex(8), videotex(9), illegal(10) | ||
| IsdnCallSpeed | |||
| INTEGER | speed-56k(1), speed-64k(2), speed-illegal(3) | ||
| IsdnBChannels | |||
| INTEGER | b1-channel(1), b2-channel(2), illegal(3) | ||
| IsdnAnsEnable | |||
| INTEGER | disabled(1), enabled(2), enabled-illegal(3) | ||
| IsdnScrStatus | |||
| INTEGER | disabled(1), enabled(2), illegal(3) | ||
| IsdnCallOpt | |||
| INTEGER | opt(1), option(2), call-opt(3) | ||
| IsdnStoDefined | |||
| INTEGER | stored(1) | ||
| IsdnTeiStatus | |||
| INTEGER | unassigned(1), outstanding(2), assigned(3), illegal(4) | ||
| IsdnL2State | |||
| INTEGER | null-state(1), tei-unassigned(2), assign-awaiting-tei(3), establish-awaiting-tei(4), tei-assigned(5), awaiting-established(6), awaiting-release(7), mutiple-frame-established(8), timer-recovery(9), illegal(10) | ||
| IsdnL3State | |||
| INTEGER | null-state(1), call-init(2), overlap-sending(3), out-call-proc(4), call-delivered(5), undefined-state-5(6), call-present(7), call-received(8), connect-request(9), in-call-proc(10), call-active(11), disconnect-request(12), disconnect-ind(13), undefined-state-13(14), call-passive(15), suspend-request(16), undefined-state-16(17), resume-request(18), undefined-state-18(19), release-request(20), register-request(21), cancel-request(22), undefined-state-22(23), undefined-state-23(24), undefined-state-24(25), overlap-receive(26), idle-state(27), establish-wait(28), asai-tr1-state(29), u10-hold-request(30), u10-transfer-request(31), u10-conference-request(32), u10-reconnect-request(33), u10-awaiting-disc(34), u10-call-on-hold(35), broadcast-state(36), illegal(37) | ||
| IsdnP3State | |||
| INTEGER | closed(1), opening(2), opened(3), tei-establishment(4), sw-activation(5), activated(6), deactivated(7), closing(8), illegal(9) | ||
| IsdnActState | |||
| INTEGER | deactivated(1), activating(2), active(3), call-failed(4), activ-failed(5), illegal(6) | ||
| IsdnNI1BCcState | |||
| INTEGER | null-state(1), idle(2), ringing(3), connected(4), dialing(5), lockout(6), offhook-releasing(7), onhook-releasing(8), originate(9), routing(10), call-queued(11), illegal(12) | ||
| IsdnTR6BCcState | |||
| INTEGER | null-state(1), idle(2), ringing(3), connecting(4), connected(5), lockout(6), offhook-releasing(7), onhook-releasing(8), originate(9), routing(10), call-queued(11), illegal(12) | ||
| IsdnVN3BCcState | |||
| INTEGER | null-state(1), idle(2), ringing(3), connecting(4), connected(5), lockout(6), offhook-releasing(7), onhook-releasing(8), originate(9), routing(10), call-queued(11), illegal(12) | ||
| IsdnNET3BCcState | |||
| INTEGER | null-state(1), idle(2), ringing(3), connecting(4), connected(5), lockout(6), offhook-releasing(7), onhook-releasing(8), originate(9), routingout(10), call-queued(11), bell-releasing(12), illegal(13) | ||
| IsdnTPHBCcState | |||
| INTEGER | null-state(1), idle(2), ringing(3), connected(4), dialing(5), lockout(6), offhook-releasing(7), onhook-releasing(8), originate(9), routing(10), call-queued(11), illegal(12) | ||
| DialerInfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerInfoPortRef | |||
| INTEGER as dialerInfoType | |||
| TimeTicks as dialerInfoTimeStart | |||
| TimeTicks as dialerInfoTimeConnect | |||
| INTEGER as dialerInfoLineSpeed | |||
| DataEncoding as dialerInfoDataEncoding | |||
| ClockType as dialerInfoClockType | |||
| DialerDirectInfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerDirectPortRef | |||
| INTEGER as dialerDirectIfType | |||
| INTEGER as dialerDirectMode | |||
| INTEGER as dialerDirectConnDelay | |||
| INTEGER as dialerDirectRtsDelay | |||
| INTEGER as dialerDirectState | |||
| DialerDirectRs232InfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerDirectRs232PortRef | |||
| INTEGER as dialerDirectRs232DbounceDelay | |||
| OnOff as dialerDirectRs232DtrSignal | |||
| OnOff as dialerDirectRs232DsrSignal | |||
| OnOff as dialerDirectRs232RiSignal | |||
| DialerDirectX21InfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerDirectX21PortRef | |||
| OnOff as dialerDirectX21CtrlSignal | |||
| OnOff as dialerDirectX21IndicSignal | |||
| DialerV25bisInfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerV25bisPortRef | |||
| DisplayString as dialerV25bisPrimaryNum | |||
| DisplayString as dialerV25bisSecondaryNum | |||
| FalseTrue as dialerV25bisAnsEnable | |||
| FalseTrue as dialerV25bisRetryAllowed | |||
| INTEGER as dialerV25bisMaxRetries | |||
| INTEGER as dialerV25bisRetryDelay | |||
| INTEGER as dialerV25bisConnDelay | |||
| INTEGER as dialerV25bisOnOffDelay | |||
| INTEGER as dialerV25bisLossDelay | |||
| INTEGER as dialerV25bisMinDsrOnDelay | |||
| INTEGER as dialerV25bisRiDtrDelay | |||
| INTEGER as dialerV25bisHangupDelay | |||
| INTEGER as dialerV25bisDeltaRiDelay | |||
| INTEGER as dialerV25bisCtsOnDelay | |||
| OnOff as dialerV25bisDtrSignal | |||
| OnOff as dialerV25bisDsrSignal | |||
| OnOff as dialerV25bisCtsSignal | |||
| OnOff as dialerV25bisRiSignal | |||
| INTEGER as dialerV25bisState | |||
| DialerAtCmdInfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerAtCmdPortRef | |||
| DisplayString as dialerAtCmdPrimaryNum | |||
| DisplayString as dialerAtCmdSecondaryNum | |||
| FalseTrue as dialerAtCmdAnsEnable | |||
| FalseTrue as dialerAtCmdRetryAllowed | |||
| INTEGER as dialerAtCmdMaxRetries | |||
| INTEGER as dialerAtCmdRetryDelay | |||
| INTEGER as dialerAtCmdConnDelay | |||
| INTEGER as dialerAtCmdOnOffDelay | |||
| INTEGER as dialerAtCmdLossDelay | |||
| INTEGER as dialerAtCmdMinDsrOnDelay | |||
| INTEGER as dialerAtCmdRiDtrDelay | |||
| INTEGER as dialerAtCmdHangupDelay | |||
| INTEGER as dialerAtCmdDeltaRiDelay | |||
| INTEGER as dialerAtCmdParity | |||
| INTEGER as dialerAtCmdBitsPerByte | |||
| INTEGER as dialerAtCmdModemSpeed | |||
| OnOff as dialerAtCmdDtrSignal | |||
| OnOff as dialerAtCmdDsrSignal | |||
| OnOff as dialerAtCmdRiSignal | |||
| INTEGER as dialerAtCmdState | |||
| DialerV22BisDnaInfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerV22BisDnaPortRef | |||
| DisplayString as dialerV22BisDnaPrimaryNum | |||
| DisplayString as dialerV22BisDnaSecondaryNum | |||
| FalseTrue as dialerV22BisDnaAnsEnable | |||
| FalseTrue as dialerV22BisDnaRetryAllowed | |||
| INTEGER as dialerV22BisDnaMaxRetries | |||
| FalseTrue as dialerV22BisDnaCallProgress | |||
| FalseTrue as dialerV22BisDnaDecadic | |||
| INTEGER as dialerV22BisDnaMakeBreakRatio | |||
| INTEGER as dialerV22BisDnaRetryDelay | |||
| INTEGER as dialerV22BisDnaMinDialDelay | |||
| INTEGER as dialerV22BisDnaWaitDialTone | |||
| INTEGER as dialerV22BisDnaWaitCarrier | |||
| INTEGER as dialerV22BisDnaHndshkAbortTimer | |||
| INTEGER as dialerV22BisDnaGuardTone | |||
| INTEGER as dialerV22BisDnaPulseDelay | |||
| INTEGER as dialerV22BisDnaDTMFDuration | |||
| INTEGER as dialerV22BisDnaDTMFDelay | |||
| INTEGER as dialerV22BisDnaDTMFLevel | |||
| INTEGER as dialerV22BisDnaTxLevel | |||
| FalseTrue as dialerV22BisDnaRxLevel | |||
| INTEGER as dialerV22BisDnaRiNbr | |||
| INTEGER as dialerV22BisDnaDeltaRiDelay | |||
| INTEGER as dialerV22BisDnaRiDtrDelay | |||
| INTEGER as dialerV22BisDnaDsrRtsDelay | |||
| INTEGER as dialerV22BisDnaModemSpeed | |||
| OnOff as dialerV22BisDnaDtrSignal | |||
| OnOff as dialerV22BisDnaDsrSignal | |||
| OnOff as dialerV22BisDnaRiSignal | |||
| OnOff as dialerV22BisDnaCdSignal | |||
| OnOff as dialerV22BisDnaToneInd | |||
| OnOff as dialerV22BisDnaDloInd | |||
| INTEGER as dialerV22BisDnaState | |||
| DialerV22BisImcInfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerV22BisImcPortRef | |||
| DisplayString as dialerV22BisImcPrimaryNum | |||
| DisplayString as dialerV22BisImcSecondaryNum | |||
| FalseTrue as dialerV22BisImcAnsEnable | |||
| FalseTrue as dialerV22BisImcRetryAllowed | |||
| INTEGER as dialerV22BisImcMaxRetries | |||
| FalseTrue as dialerV22BisImcCallProgress | |||
| FalseTrue as dialerV22BisImcDecadic | |||
| INTEGER as dialerV22BisImcMakeBreakRatio | |||
| INTEGER as dialerV22BisImcRetryDelay | |||
| INTEGER as dialerV22BisImcMinDialDelay | |||
| INTEGER as dialerV22BisImcWaitDialTone | |||
| INTEGER as dialerV22BisImcWaitCarrier | |||
| INTEGER as dialerV22BisImcHndshkAbortTimer | |||
| INTEGER as dialerV22BisImcGuardTone | |||
| INTEGER as dialerV22BisImcPulseDelay | |||
| INTEGER as dialerV22BisImcDTMFDuration | |||
| INTEGER as dialerV22BisImcDTMFDelay | |||
| INTEGER as dialerV22BisImcDTMFLevel | |||
| INTEGER as dialerV22BisImcTxLevel | |||
| INTEGER as dialerV22BisImcRxLevel | |||
| INTEGER as dialerV22BisImcRiNbr | |||
| INTEGER as dialerV22BisImcDeltaRiDelay | |||
| INTEGER as dialerV22BisImcRiDtrDelay | |||
| INTEGER as dialerV22BisImcDsrRtsDelay | |||
| INTEGER as dialerV22BisImcModemSpeed | |||
| OnOff as dialerV22BisImcDtrSignal | |||
| OnOff as dialerV22BisImcDsrSignal | |||
| OnOff as dialerV22BisImcRiSignal | |||
| OnOff as dialerV22BisImcCdSignal | |||
| OnOff as dialerV22BisImcToneInd | |||
| OnOff as dialerV22BisImcDloInd | |||
| INTEGER as dialerV22BisImcLineType | |||
| INTEGER as dialerV22BisImcLeasedOpertn | |||
| INTEGER as dialerV22BisImcSpeakerLevel | |||
| INTEGER as dialerV22BisImcState | |||
| DialerV32BisInfoEntry | |||
| SEQUENCE | |||
| PortRef as dialerV32BisPortRef | |||
| DisplayString as dialerV32BisPrimNum | |||
| DisplayString as dialerV32BisSecNum | |||
| DisplayString as dialerV32BisOverrNum | |||
| DisplayString as dialerV32BisCurrNum | |||
| PrimBitRate as dialerV32BisPrimBitRate | |||
| PrimBitRate as dialerV32BisSecBitRate | |||
| PrimBitRate as dialerV32BisOverrBitRate | |||
| PrimBitRate as dialerV32BisCurrBitRate | |||
| PrimCfg as dialerV32BisPrimConfig | |||
| PrimCfg as dialerV32BisSecConfig | |||
| PrimCfg as dialerV32BisOverrConfig | |||
| PrimCfg as dialerV32BisCurrConfig | |||
| INTEGER as dialerV32BisCurrRetry | |||
| INTEGER as dialerV32BisRingCount | |||
| FalseTrue as dialerV32BisAnsEnable | |||
| INTEGER as dialerV32BisDialMethod | |||
| FalseTrue as dialerV32BisRetry | |||
| INTEGER as dialerV32BisCallFailure | |||
| INTEGER as dialerV32BisCarrierDetect | |||
| INTEGER as dialerV32BisCarrierWait | |||
| INTEGER as dialerV32BisHangupVerify | |||
| DisEnable as dialerV32BisHangupSignal | |||
| INTEGER as dialerV32BisTxLevel | |||
| INTEGER as dialerV32BisRxLevel | |||
| INTEGER as dialerV32BisGuardTone | |||
| INTEGER as dialerV32BisLeasedLine | |||
| INTEGER as dialerV32BisLeaseMode | |||
| INTEGER as dialerV32BisLLTxLevel | |||
| PrimCfg as dialerV32BisLLConfig | |||
| PrimBitRate as dialerV32BisLLBitRate | |||
| DisEnable as dialerV32BisCallingTone | |||
| DisEnable as dialerV32BisAutoMode | |||
| DisEnable as dialerV32BisRetryAllowed | |||
| INTEGER as dialerV32BisMaxRetry | |||
| DisEnable as dialerV32BisDialTone | |||
| INTEGER as dialerV32BisDialToneWait | |||
| INTEGER as dialerV32BisRetryWait | |||
| INTEGER as dialerV32BisHangupWait | |||
| INTEGER as dialerV32BisDialPauseWait | |||
| INTEGER as dialerV32BisDeltaRiWait | |||
| INTEGER as dialerV32BisDTMFDuration | |||
| INTEGER as dialerV32BisDTMFDelay | |||
| INTEGER as dialerV32BisDTMFFreq1Level | |||
| INTEGER as dialerV32BisDTMFFreq2Level | |||
| INTEGER as dialerV32BisPulseMakeTime | |||
| INTEGER as dialerV32BisPulseBreakTime | |||
| INTEGER as dialerV32BisPulseDelay | |||
| INTEGER as dialerV32BisSpeakerLevel | |||
| INTEGER as dialerV32BisRiToAnswer | |||
| PrimBitRate as dialerV32BisAnswerBitRate | |||
| PrimCfg as dialerV32BisAnswerConfig | |||
| OnOff as dialerV32BisRetrain | |||
| INTEGER as dialerV32BisEqmLevel | |||
| OnOff as dialerV32BisRiOnOffDetect | |||
| OnOff as dialerV32BisCdDetect | |||
| OnOff as dialerV32BisRingbackDetect | |||
| OnOff as dialerV32BisAnswerDetect | |||
| OnOff as dialerV32BisBusyDetect | |||
| OnOff as dialerV32BisDiscDetect | |||
| OnOff as dialerV32BisCdSignal | |||
| OnOff as dialerV32BisDsrSignal | |||
| INTEGER as dialerV32BisState | |||
| DialerControlEntry | |||
| SEQUENCE | |||
| PortRef as dialerCtrlPortRef | |||
| INTEGER as dialerCtrlAction | |||
| FalseTrue as dialerCtrlAnsEnable | |||
| OnOff as dialerCtrlDirectDSROnOff | |||
| DisplayString as dialerCtrlNumber | |||
| DisplayString as dialerCtrlScriptFile | |||
| ActionState as dialerCtrlActionState | |||
| INTEGER as dialerCtrlActionError | |||
| PrimCfg as dialerCtrlConfig | |||
| PrimBitRate as dialerCtrlBitRate | |||
| IsdnDnType as dialerCtrlType | |||
| IsdnDnPlan as dialerCtrlPlan | |||
| DisplayString as dialerCtrlSub | |||
| IsdnSubType as dialerCtrlSubType | |||
| DisplayString as dialerCtrlTns | |||
| DisplayString as dialerCtrlNumberTemp | |||
| INTEGER as dialerCtrlDialMask | |||
| INTEGER as dialerCtrlCallSpeed | |||
| DialerIsdnStatusEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnStatusPortRef | |||
| INTEGER as dialerIsdnStatusSwitchType | |||
| INTEGER as dialerIsdnStatusChType | |||
| INTEGER as dialerIsdnStatusL1State | |||
| INTEGER as dialerIsdnStatusState | |||
| DialerIsdnNI1BChEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnNI1BChPortRef | |||
| DisplayString as dialerIsdnNI1BChSpid | |||
| IsdnSpidStatus as dialerIsdnNI1BChSpidStatus | |||
| DisplayString as dialerIsdnNI1BChLocalDn | |||
| DisplayString as dialerIsdnNI1BChLocalSub | |||
| DisplayString as dialerIsdnNI1BChTnsDigs | |||
| DisplayString as dialerIsdnNI1BChRemoteDn | |||
| DisplayString as dialerIsdnNI1BChRemoteSub | |||
| IsdnCallType as dialerIsdnNI1BChCallType | |||
| IsdnCallSpeed as dialerIsdnNI1BChCallSpeed | |||
| IsdnBChannels as dialerIsdnNI1BChBChannel | |||
| IsdnAnsEnable as dialerIsdnNI1BChAnsEnable | |||
| IsdnNI1BCcState as dialerIsdnNI1BChCcState | |||
| INTEGER as dialerIsdnNI1BChCcNbCause | |||
| OCTET STRING as dialerIsdnNI1BChCcCause | |||
| IsdnL3State as dialerIsdnNI1BChL3State | |||
| IsdnL2State as dialerIsdnNI1BChL2State | |||
| INTEGER as dialerIsdnNI1BChTeiValue | |||
| IsdnTeiStatus as dialerIsdnNI1BChTeiStatus | |||
| IsdnDnType as dialerIsdnNI1BChLocalDnType | |||
| IsdnDnPlan as dialerIsdnNI1BChLocalDnPlan | |||
| IsdnSubType as dialerIsdnNI1BChLocalSubType | |||
| IsdnTnsNetId as dialerIsdnNI1BChTnsNetId | |||
| IsdnTnsIdPlan as dialerIsdnNI1BChTnsIdPlan | |||
| IsdnDnType as dialerIsdnNI1BChRemoteDnType | |||
| IsdnDnPlan as dialerIsdnNI1BChRemoteDnPlan | |||
| IsdnSubType as dialerIsdnNI1BChRemoteSubType | |||
| IsdnScrStatus as dialerIsdnNI1BChScrStatus | |||
| IsdnCallOpt as dialerIsdnNI1BChCallOpt | |||
| IsdnStoDefined as dialerIsdnNI1BChStoDefined | |||
| INTEGER as dialerIsdnNI1BChStoDnType | |||
| INTEGER as dialerIsdnNI1BChStoDnPlan | |||
| DisplayString as dialerIsdnNI1BChStoDn | |||
| INTEGER as dialerIsdnNI1BChStoSubType | |||
| DisplayString as dialerIsdnNI1BChStoSub | |||
| INTEGER as dialerIsdnNI1BChStoTnsNetId | |||
| INTEGER as dialerIsdnNI1BChStoTnsPlan | |||
| DisplayString as dialerIsdnNI1BChStoDigs | |||
| INTEGER as dialerIsdnNI1BChStoBcType | |||
| INTEGER as dialerIsdnNI1BChStoBcOpt | |||
| DialerIsdnNI1DChEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnNI1DChPortRef | |||
| INTEGER as dialerIsdnNI1DChTeiValue | |||
| IsdnTeiStatus as dialerIsdnNI1DChTeiStatus | |||
| IsdnL2State as dialerIsdnNI1DChL2State | |||
| IsdnP3State as dialerIsdnNI1DChP3State | |||
| IsdnActState as dialerIsdnNI1DChActState | |||
| DialerIsdnTR6BChEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnTR6BChPortRef | |||
| DisplayString as dialerIsdnTR6BChLocalDn | |||
| DisplayString as dialerIsdnTR6BChRemoteDn | |||
| IsdnCallType as dialerIsdnTR6BChCallType | |||
| IsdnCallSpeed as dialerIsdnTR6BChCallSpeed | |||
| IsdnBChannels as dialerIsdnTR6BChBChannel | |||
| IsdnAnsEnable as dialerIsdnTR6BChAnsEnable | |||
| IsdnTR6BCcState as dialerIsdnTR6BChCcState | |||
| INTEGER as dialerIsdnTR6BChCcNbCause | |||
| OCTET STRING as dialerIsdnTR6BChCcCause | |||
| IsdnL3State as dialerIsdnTR6BChL3State | |||
| IsdnL2State as dialerIsdnTR6BChL2State | |||
| IsdnDnType as dialerIsdnTR6BChLocalDnType | |||
| IsdnDnPlan as dialerIsdnTR6BChLocalDnPlan | |||
| IsdnDnType as dialerIsdnTR6BChRemoteDnType | |||
| IsdnDnPlan as dialerIsdnTR6BChRemoteDnPlan | |||
| IsdnScrStatus as dialerIsdnTR6BChScrStatus | |||
| IsdnCallOpt as dialerIsdnTR6BChCallOpt | |||
| INTEGER as dialerIsdnTR6BChTeiValue | |||
| IsdnTeiStatus as dialerIsdnTR6BChTeiStatus | |||
| IsdnStoDefined as dialerIsdnTR6BChStoDefined | |||
| INTEGER as dialerIsdnTR6BChStoDnType | |||
| INTEGER as dialerIsdnTR6BChStoDnPlan | |||
| DisplayString as dialerIsdnTR6BChStoDn | |||
| INTEGER as dialerIsdnTR6BChStoBcType | |||
| INTEGER as dialerIsdnTR6BChStoBcOpt | |||
| DialerIsdnVN3BChEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnVN3BChPortRef | |||
| IsdnDnType as dialerIsdnVN3BChLocalDnType | |||
| IsdnDnPlan as dialerIsdnVN3BChLocalDnPlan | |||
| DisplayString as dialerIsdnVN3BChLocalDn | |||
| IsdnSubType as dialerIsdnVN3BChLocalSubType | |||
| DisplayString as dialerIsdnVN3BChLocalSub | |||
| IsdnDnType as dialerIsdnVN3BChRemoteDnType | |||
| IsdnDnPlan as dialerIsdnVN3BChRemoteDnPlan | |||
| DisplayString as dialerIsdnVN3BChRemoteDn | |||
| IsdnSubType as dialerIsdnVN3BChRemoteSubType | |||
| DisplayString as dialerIsdnVN3BChRemoteSub | |||
| IsdnCallType as dialerIsdnVN3BChCallType | |||
| IsdnCallSpeed as dialerIsdnVN3BChCallSpeed | |||
| IsdnBChannels as dialerIsdnVN3BChBChannel | |||
| IsdnAnsEnable as dialerIsdnVN3BChAnsEnable | |||
| IsdnScrStatus as dialerIsdnVN3BChScrStatus | |||
| IsdnCallOpt as dialerIsdnVN3BChCallOpt | |||
| IsdnVN3BCcState as dialerIsdnVN3BChCcState | |||
| INTEGER as dialerIsdnVN3BChCcNbCause | |||
| OCTET STRING as dialerIsdnVN3BChCcCause | |||
| IsdnL3State as dialerIsdnVN3BChL3State | |||
| IsdnL2State as dialerIsdnVN3BChL2State | |||
| INTEGER as dialerIsdnVN3BChTeiValue | |||
| IsdnTeiStatus as dialerIsdnVN3BChTeiStatus | |||
| IsdnStoDefined as dialerIsdnVN3BChStoDefined | |||
| INTEGER as dialerIsdnVN3BChStoDnType | |||
| INTEGER as dialerIsdnVN3BChStoDnPlan | |||
| DisplayString as dialerIsdnVN3BChStoDn | |||
| INTEGER as dialerIsdnVN3BChStoSubType | |||
| DisplayString as dialerIsdnVN3BChStoSub | |||
| INTEGER as dialerIsdnVN3BChStoBcType | |||
| INTEGER as dialerIsdnVN3BChStoBcOpt | |||
| DialerIsdnVN3DChEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnVN3DChPortRef | |||
| INTEGER as dialerIsdnVN3DChTeiValue | |||
| IsdnTeiStatus as dialerIsdnVN3DChTeiStatus | |||
| IsdnL2State as dialerIsdnVN3DChL2State | |||
| IsdnP3State as dialerIsdnVN3DChP3State | |||
| DialerIsdnNET3BChEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnNET3BChPortRef | |||
| IsdnDnType as dialerIsdnNET3BChLocalDnType | |||
| IsdnDnPlan as dialerIsdnNET3BChLocalDnPlan | |||
| DisplayString as dialerIsdnNET3BChLocalDn | |||
| IsdnSubType as dialerIsdnNET3BChLocalSubType | |||
| DisplayString as dialerIsdnNET3BChLocalSub | |||
| IsdnDnType as dialerIsdnNET3BChRemoteDnType | |||
| IsdnDnPlan as dialerIsdnNET3BChRemoteDnPlan | |||
| DisplayString as dialerIsdnNET3BChRemoteDn | |||
| IsdnSubType as dialerIsdnNET3BChRemoteSubType | |||
| DisplayString as dialerIsdnNET3BChRemoteSub | |||
| IsdnCallType as dialerIsdnNET3BChCallType | |||
| IsdnCallSpeed as dialerIsdnNET3BChCallSpeed | |||
| IsdnBChannels as dialerIsdnNET3BChBChannel | |||
| IsdnAnsEnable as dialerIsdnNET3BChAnsEnable | |||
| IsdnTnsNetId as dialerIsdnNET3BChTnsNetId | |||
| IsdnTnsIdPlan as dialerIsdnNET3BChTnsIdPlan | |||
| DisplayString as dialerIsdnNET3BChTnsDigs | |||
| IsdnScrStatus as dialerIsdnNET3BChScrStatus | |||
| IsdnCallOpt as dialerIsdnNET3BChCallOpt | |||
| IsdnNET3BCcState as dialerIsdnNET3BChCcState | |||
| INTEGER as dialerIsdnNET3BChCcNbCause | |||
| OCTET STRING as dialerIsdnNET3BChCcCause | |||
| IsdnL3State as dialerIsdnNET3BChL3State | |||
| IsdnL2State as dialerIsdnNET3BChL2State | |||
| INTEGER as dialerIsdnNET3BChTeiValue | |||
| IsdnTeiStatus as dialerIsdnNET3BChTeiStatus | |||
| IsdnStoDefined as dialerIsdnNET3BChStoDefined | |||
| INTEGER as dialerIsdnNET3BChStoDnType | |||
| INTEGER as dialerIsdnNET3BChStoDnPlan | |||
| DisplayString as dialerIsdnNET3BChStoDn | |||
| INTEGER as dialerIsdnNET3BChStoSubType | |||
| DisplayString as dialerIsdnNET3BChStoSub | |||
| INTEGER as dialerIsdnNET3BChStoTnsNetId | |||
| INTEGER as dialerIsdnNET3BChStoTnsPlan | |||
| DisplayString as dialerIsdnNET3BChStoDigs | |||
| INTEGER as dialerIsdnNET3BChStoBcType | |||
| INTEGER as dialerIsdnNET3BChStoBcOpt | |||
| DialerIsdnTPHBChEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnTPHBChPortRef | |||
| IsdnDnType as dialerIsdnTPHBChLocalDnType | |||
| IsdnDnPlan as dialerIsdnTPHBChLocalDnPlan | |||
| DisplayString as dialerIsdnTPHBChLocalDn | |||
| IsdnSubType as dialerIsdnTPHBChLocalSubType | |||
| DisplayString as dialerIsdnTPHBChLocalSub | |||
| IsdnDnType as dialerIsdnTPHBChRemoteDnType | |||
| IsdnDnPlan as dialerIsdnTPHBChRemoteDnPlan | |||
| DisplayString as dialerIsdnTPHBChRemoteDn | |||
| IsdnSubType as dialerIsdnTPHBChRemoteSubType | |||
| DisplayString as dialerIsdnTPHBChRemoteSub | |||
| IsdnCallType as dialerIsdnTPHBChCallType | |||
| IsdnCallSpeed as dialerIsdnTPHBChCallSpeed | |||
| IsdnBChannels as dialerIsdnTPHBChBChannel | |||
| IsdnAnsEnable as dialerIsdnTPHBChAnsEnable | |||
| IsdnScrStatus as dialerIsdnTPHBChScrStatus | |||
| IsdnCallOpt as dialerIsdnTPHBChCallOpt | |||
| IsdnTPHBCcState as dialerIsdnTPHBChCcState | |||
| INTEGER as dialerIsdnTPHBChCcNbCause | |||
| OCTET STRING as dialerIsdnTPHBChCcCause | |||
| IsdnL3State as dialerIsdnTPHBChL3State | |||
| IsdnL2State as dialerIsdnTPHBChL2State | |||
| INTEGER as dialerIsdnTPHBChTeiValue | |||
| IsdnTeiStatus as dialerIsdnTPHBChTeiStatus | |||
| IsdnStoDefined as dialerIsdnTPHBChStoDefined | |||
| INTEGER as dialerIsdnTPHBChStoDnType | |||
| INTEGER as dialerIsdnTPHBChStoDnPlan | |||
| DisplayString as dialerIsdnTPHBChStoDn | |||
| INTEGER as dialerIsdnTPHBChStoSubType | |||
| DisplayString as dialerIsdnTPHBChStoSub | |||
| INTEGER as dialerIsdnTPHBChStoBcType | |||
| INTEGER as dialerIsdnTPHBChStoBcOpt | |||
| DialerIsdnTPHDChEntry | |||
| SEQUENCE | |||
| PortRef as dialerIsdnTPHDChPortRef | |||
| INTEGER as dialerIsdnTPHDChTeiValue | |||
| IsdnTeiStatus as dialerIsdnTPHDChTeiStatus | |||
| IsdnL2State as dialerIsdnTPHDChL2State | |||
| IsdnP3State as dialerIsdnTPHDChP3State | |||