EICON-MIB-ROUTER

File: EICON-MIB-ROUTER.mib (56689 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
RFC1213-MIB

Imported symbols

Counter IpAddress Gauge
TimeTicks enterprises OBJECT-TYPE
TRAP-TYPE DisplayString

Defined Objects

eicon 1.3.6.1.4.1.434
OBJECT IDENTIFIER    

management 1.3.6.1.4.1.434.2
OBJECT IDENTIFIER    

mibv2 1.3.6.1.4.1.434.2.2
OBJECT IDENTIFIER    

module 1.3.6.1.4.1.434.2.2.4
OBJECT IDENTIFIER    

router 1.3.6.1.4.1.434.2.2.8
OBJECT IDENTIFIER    

rtName 1.3.6.1.4.1.434.2.2.8.1
The name advertised by the router agent using SAP.
OBJECT-TYPE    
  DisplayString SIZE(1..48)  

rtProductName 1.3.6.1.4.1.434.2.2.8.2
The Product name ie. Router for Netware.
OBJECT-TYPE    
  DisplayString SIZE(1..48)  

rtReleaseVersion 1.3.6.1.4.1.434.2.2.8.3
Ex.: Ver. 3 Rel. 2.
OBJECT-TYPE    
  INTEGER  

rtReleaseDate 1.3.6.1.4.1.434.2.2.8.4
Format: 1993/03/25.
OBJECT-TYPE    
  INTEGER  

rtOperState 1.3.6.1.4.1.434.2.2.8.5
The operational state of the router.
OBJECT-TYPE    
  OperState  

rtAdminStateCtr 1.3.6.1.4.1.434.2.2.8.6
The administrative state of the router. Management station will change this value to start or stop the router.
OBJECT-TYPE    
  AdminState  

rtType 1.3.6.1.4.1.434.2.2.8.7
Type of router.
OBJECT-TYPE    
  INTEGER typeNetWareRouter(1), typeOS2Router(2), typeUnixRouter(3), typeNTRouter(4), typeSynOpticsRouter(5), typeMadrasRouter(6)  

rtTimeUp 1.3.6.1.4.1.434.2.2.8.8
The time elapsed since the router was started.
OBJECT-TYPE    
  TimeTicks  

rtNumberOfPorts 1.3.6.1.4.1.434.2.2.8.9
The number of Eicon ports currently used by the router.
OBJECT-TYPE    
  INTEGER  

rtMaxCircuits 1.3.6.1.4.1.434.2.2.8.10
The maximum number of connections that can be configured for this router.
OBJECT-TYPE    
  INTEGER  

rtAvailableCircuits 1.3.6.1.4.1.434.2.2.8.11
The number of connections still available for this router.
OBJECT-TYPE    
  Gauge  

rtAvailableLANMapping 1.3.6.1.4.1.434.2.2.8.12
The available number of LAN protocol mappings for all connections.
OBJECT-TYPE    
  Gauge  

rtMaxLANMapping 1.3.6.1.4.1.434.2.2.8.13
The maximum number of LAN protocol mappings for all connections.
OBJECT-TYPE    
  INTEGER  

rtGlobalTxPackets 1.3.6.1.4.1.434.2.2.8.14
The number of packets transmitted by the router on all ports
OBJECT-TYPE    
  Counter  

rtGlobalTxBytesLow 1.3.6.1.4.1.434.2.2.8.15
The number of bytes transmitted by the router on all ports - the low 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtGlobalTxBytesHigh 1.3.6.1.4.1.434.2.2.8.16
The number of bytes transmitted by the router on all ports - the high 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtGlobalRxPackets 1.3.6.1.4.1.434.2.2.8.17
The number of packets received by the router on all ports
OBJECT-TYPE    
  Counter  

rtGlobalRxBytesLow 1.3.6.1.4.1.434.2.2.8.18
The number of bytes received by the router on all ports - the low 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtGlobalRxBytesHigh 1.3.6.1.4.1.434.2.2.8.19
The number of bytes received by the router on all ports - the high 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtGlobalTxDropNoRoute 1.3.6.1.4.1.434.2.2.8.20
The number of transmit packets dropped on all ports because no route was found.
OBJECT-TYPE    
  Counter  

rtGlobalTxDropNoResource 1.3.6.1.4.1.434.2.2.8.21
The number of transmit packets dropped on all ports because resources were exhausted.
OBJECT-TYPE    
  Counter  

rtGlobalTxDropUnknownProt 1.3.6.1.4.1.434.2.2.8.22
The number of transmit packets dropped because the WAN protocol is not supported.
OBJECT-TYPE    
  Counter  

rtGlobalRxDropNoResource 1.3.6.1.4.1.434.2.2.8.23
The number of received packets dropped on all ports because resources were exhausted.
OBJECT-TYPE    
  Counter  

rtGlobalRxDropUnknownProt 1.3.6.1.4.1.434.2.2.8.24
The number of received packets dropped because a LAN protocol is not supported.
OBJECT-TYPE    
  Counter  

rtGlobalRxError 1.3.6.1.4.1.434.2.2.8.25
The number of errors encountered when receiving from the EiconCard(s).
OBJECT-TYPE    
  Counter  

rtGlobalCountersReset 1.3.6.1.4.1.434.2.2.8.26
This variable is used to reset all router global counters.
OBJECT-TYPE    
  ControlOnOff  

rtTraceCtrl 1.3.6.1.4.1.434.2.2.8.27
This object is used to start or stop the trace with the parameters specified by the following trace objects.
OBJECT-TYPE    
  ControlOnOff  

rtTraceFileName 1.3.6.1.4.1.434.2.2.8.28
The (fully qualified) file name for the file which will hold the trace.
OBJECT-TYPE    
  DisplayString SIZE(1..48)  

rtTraceInterfaceType 1.3.6.1.4.1.434.2.2.8.29
The mask which indicates to the Agent the interface type(s) to be traced. The trace value for the lower layer is (1) and for the upper layer is (2).
OBJECT-TYPE    
  INTEGER  

rtPortTable 1.3.6.1.4.1.434.2.2.8.30
The router port table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtPortEntry

rtPortEntry 1.3.6.1.4.1.434.2.2.8.30.1
The router information for one port.
OBJECT-TYPE    
  RtPortEntry  

rtPortIndex 1.3.6.1.4.1.434.2.2.8.30.1.1
Index of this table
OBJECT-TYPE    
  INTEGER 1..48  

rtPortNumber 1.3.6.1.4.1.434.2.2.8.30.1.2
EiconCard port number.
OBJECT-TYPE    
  INTEGER 1..48  

rtPortProtocol 1.3.6.1.4.1.434.2.2.8.30.1.3
Mask indicating the choice of WAN protocols: x25 (1), fr (2), ppp (4), sna (8), hdlc (16).
OBJECT-TYPE    
  INTEGER  

rtPortTxThroughput 1.3.6.1.4.1.434.2.2.8.30.1.4
Throughput calculated for the transmision.
OBJECT-TYPE    
  Gauge  

rtPortRxThroughput 1.3.6.1.4.1.434.2.2.8.30.1.5
Throughput calculated for the reception.
OBJECT-TYPE    
  Gauge  

rtPortTxPackets 1.3.6.1.4.1.434.2.2.8.30.1.6
Number of packets transmitted for this port.
OBJECT-TYPE    
  Counter  

rtPortTxBytesLow 1.3.6.1.4.1.434.2.2.8.30.1.7
Number of bytes transmitted for this port; the low 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtPortTxBytesHigh 1.3.6.1.4.1.434.2.2.8.30.1.8
Number of bytes transmitted for this port; the high 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtPortRxPackets 1.3.6.1.4.1.434.2.2.8.30.1.9
Number of packets received for this port.
OBJECT-TYPE    
  Counter  

rtPortRxBytesLow 1.3.6.1.4.1.434.2.2.8.30.1.10
Number of bytes received for this port; the low 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtPortRxBytesHigh 1.3.6.1.4.1.434.2.2.8.30.1.11
Number of bytes received for this port; the high 32 bits of the 64 bits counter.
OBJECT-TYPE    
  Counter  

rtPortTxDropNoResource 1.3.6.1.4.1.434.2.2.8.30.1.12
Number of transmit packets dropped because no resources were available.
OBJECT-TYPE    
  Counter  

rtPortRxError 1.3.6.1.4.1.434.2.2.8.30.1.13
Number of packets received with an EiconCard error.
OBJECT-TYPE    
  Counter  

rtPortCountersReset 1.3.6.1.4.1.434.2.2.8.30.1.14
This object is used to reset the values of all counters for this port.
OBJECT-TYPE    
  ControlOnOff  

rtConnFreeIndex 1.3.6.1.4.1.434.2.2.8.31
The index value used by the Management station to create the row in the rtConnTable. This value will be used to identify new instance of rtConnEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent accepts this value it will change it to underCreation (3). After that, the Management station has a limited time to create all remaining objects in the rtConnEntry and change rtConnEntryStatus to valid (1) or abandon and change rtConnEntryStatus to invalid (4). The entries with the invalid (4) state can be deleted from the table by the Agent.
OBJECT-TYPE    
  INTEGER  

rtConnTable 1.3.6.1.4.1.434.2.2.8.32
The table of WAN connections to peer routers.
OBJECT-TYPE    
  SEQUENCE OF  
    RtConnEntry

rtConnEntry 1.3.6.1.4.1.434.2.2.8.32.1
The routing information for one destination.
OBJECT-TYPE    
  RtConnEntry  

rtConnIndex 1.3.6.1.4.1.434.2.2.8.32.1.1
The index used to identify the connection entry.
OBJECT-TYPE    
  INTEGER  

rtConnName 1.3.6.1.4.1.434.2.2.8.32.1.2
The name used to identify the connection entry.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

rtConnComment 1.3.6.1.4.1.434.2.2.8.32.1.3
Optional comment about the connection entry.
OBJECT-TYPE    
  DisplayString SIZE(0..80)  

rtConnEntryStatus 1.3.6.1.4.1.434.2.2.8.32.1.4
The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
OBJECT-TYPE    
  EntryStatus  

rtConnOperState 1.3.6.1.4.1.434.2.2.8.32.1.5
The object describing the state of the connection.
OBJECT-TYPE    
  OperState  

rtConnAdminStateCtr 1.3.6.1.4.1.434.2.2.8.32.1.6
The object used to start and stop the circuit for this connection entry.
OBJECT-TYPE    
  AdminState  

rtConnAutoStart 1.3.6.1.4.1.434.2.2.8.32.1.7
The object used to indicate if the connnection should be activated every time the router starts. Yes is the default.
OBJECT-TYPE    
  INTEGER startYes(1), startNo(2)  

rtConnType 1.3.6.1.4.1.434.2.2.8.32.1.8
The type of connection.
OBJECT-TYPE    
  INTEGER typeIn(1), typeOut(2), typeTwoWay(3)  

rtConnInactivityTimeout 1.3.6.1.4.1.434.2.2.8.32.1.9
The connection inactivity timeout in seconds.
OBJECT-TYPE    
  INTEGER  

rtConnPortNumber 1.3.6.1.4.1.434.2.2.8.32.1.10
The EiconCard port number for this connection.
OBJECT-TYPE    
  PortRef  

rtConnCompression 1.3.6.1.4.1.434.2.2.8.32.1.11
The object indicating the type of compression to use, if any.
OBJECT-TYPE    
  INTEGER comprNo(1), comprStac(2), comprOther(3)  

rtConnRetryNum 1.3.6.1.4.1.434.2.2.8.32.1.12
The connection retry count; value (0) indicates no retry, value (100) indicates infinite retry, value (5) is the default.
OBJECT-TYPE    
  INTEGER  

rtConnRetryDelay 1.3.6.1.4.1.434.2.2.8.32.1.13
The connection retry delay in seconds.
OBJECT-TYPE    
  INTEGER  

rtConnPeerRouter 1.3.6.1.4.1.434.2.2.8.32.1.14
The type of the peer router for this connection.
OBJECT-TYPE    
  INTEGER peerNetWareV2(1), peerNetWareNLM(2), peerUniversal(3), peerCISCO(4)  

rtConnLanProtocol 1.3.6.1.4.1.434.2.2.8.32.1.15
The mask used to indicate the type of LAN protocols used for this connection. IPX =1, IP=2, AT=4.
OBJECT-TYPE    
  INTEGER  

rtConnWanProtocol 1.3.6.1.4.1.434.2.2.8.32.1.16
The object indicates which WAN protocol will be used for this connection.
OBJECT-TYPE    
  INTEGER connX25Svc(1), connX25Pvc(2), connFr(3), connPpp(4), connSna(5), connHdlc(6)  

rtConnX25LocalDTE 1.3.6.1.4.1.434.2.2.8.32.1.17
The X25 Local DTE Address configured for this connection.
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

rtConnX25RemoteDTE 1.3.6.1.4.1.434.2.2.8.32.1.18
The X25 Remote DTE Address configured for this connection.
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

rtConnX25CallingFacilities 1.3.6.1.4.1.434.2.2.8.32.1.19
The X25 Calling Facilities configured for this connection.
OBJECT-TYPE    
  DisplayString SIZE(1..218)  

rtConnX25ListeningFacilities 1.3.6.1.4.1.434.2.2.8.32.1.20
The X25 Listening Facilities configured for this connection.
OBJECT-TYPE    
  DisplayString SIZE(1..218)  

rtConnX25UserData 1.3.6.1.4.1.434.2.2.8.32.1.21
The X25 User Data configured for this connection.
OBJECT-TYPE    
  DisplayString SIZE(1..256)  

rtConnX25Pvc 1.3.6.1.4.1.434.2.2.8.32.1.22
The X25 PVC configured for this connection.
OBJECT-TYPE    
  INTEGER  

rtConnFrDlci 1.3.6.1.4.1.434.2.2.8.32.1.23
The Frame Relay DLCI configured for this connection.
OBJECT-TYPE    
  INTEGER  

rtConnSnaPuName 1.3.6.1.4.1.434.2.2.8.32.1.24
Physical Unit Name.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

rtConnSnaLocalFqName 1.3.6.1.4.1.434.2.2.8.32.1.25
Local fully qualified name.
OBJECT-TYPE    
  DisplayString SIZE(1..18)  

rtConnSnaRemoteFqName 1.3.6.1.4.1.434.2.2.8.32.1.26
Remote fully qualified name.
OBJECT-TYPE    
  DisplayString SIZE(1..18)  

rtConnSnaModeName 1.3.6.1.4.1.434.2.2.8.32.1.27
Mode name.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

rtConnSnaSendPaceWindow 1.3.6.1.4.1.434.2.2.8.32.1.28
Send Pace Window.
OBJECT-TYPE    
  INTEGER 1..255  

rtConnSnaReceivePaceWindow 1.3.6.1.4.1.434.2.2.8.32.1.29
Receive Pace Window.
OBJECT-TYPE    
  INTEGER 1..255  

rtConnSnaRuSendLow 1.3.6.1.4.1.434.2.2.8.32.1.30
Request Unit send low.
OBJECT-TYPE    
  INTEGER 133..248  

rtConnSnaRuReceiveLow 1.3.6.1.4.1.434.2.2.8.32.1.31
Request Unit receive low.
OBJECT-TYPE    
  INTEGER 133..248  

rtConnSnaRuSendHigh 1.3.6.1.4.1.434.2.2.8.32.1.32
Request Unit send high.
OBJECT-TYPE    
  INTEGER 133..248  

rtConnSnaRuReceiveHigh 1.3.6.1.4.1.434.2.2.8.32.1.33
Request unit receive high.
OBJECT-TYPE    
  INTEGER 133..248  

rtConnUsage 1.3.6.1.4.1.434.2.2.8.32.1.34
The connection can be defined as a primary or a backup connection for a primary.
OBJECT-TYPE    
  INTEGER uSagePrimary(1), uSageBackup(2)  

rtConnFrSegmentation 1.3.6.1.4.1.434.2.2.8.32.1.35
The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this connection.
OBJECT-TYPE    
  INTEGER no(1), yes(2), inProgress(3)  

rtConnFrXid 1.3.6.1.4.1.434.2.2.8.32.1.36
The object used to indicate if the Frame-relay XID (RFC1490) can be used on this connection
OBJECT-TYPE    
  INTEGER no(1), yes(2), inProgress(3)  

rtConnPrimOrBackName 1.3.6.1.4.1.434.2.2.8.32.1.37
This parameter applies only if the rtConnFunction field=FuncPrimary. This is the name used to identify primary connection entry.
OBJECT-TYPE    
  DisplayString SIZE(1..16)  

rtConnRipSapUpdateType 1.3.6.1.4.1.434.2.2.8.32.1.38
The update type of RIP / SAP.
OBJECT-TYPE    
  INTEGER none(1), onchange(2), periodic(3)  

rtConnSAPDelay 1.3.6.1.4.1.434.2.2.8.32.1.39
The delay in minutes between the SAP updates on this WAN connection.
OBJECT-TYPE    
  INTEGER  

rtConnRIPDelay 1.3.6.1.4.1.434.2.2.8.32.1.40
The delay in minutes between the RIP updates on this WAN connection.
OBJECT-TYPE    
  INTEGER  

rtIPMapFreeIndex 1.3.6.1.4.1.434.2.2.8.33
The index value used by the Management station to create the row in the rtIPMappingTable. This value will be used to identify new instance of rtIPMapEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent accepts this value it will change it to underCreation (3). After that, the Management station has a limited time to create all remaining objects in the rtIPMappingEntry and change rtIPMapEntryStatus to valid (1) or abandon and change rtIPMapEntryStatus to invalid (4). The entries with the invalid (4) state can be deleted from the table by the Agent.
OBJECT-TYPE    
  INTEGER  

rtIPMappingTable 1.3.6.1.4.1.434.2.2.8.34
The IP mapping table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtIPMappingEntry

rtIPMappingEntry 1.3.6.1.4.1.434.2.2.8.34.1
One mapping information entry.
OBJECT-TYPE    
  RtIPMappingEntry  

rtIPMapIndex 1.3.6.1.4.1.434.2.2.8.34.1.1
The index used to identify the mapping entry. It is possible to have multiple LAN mapping entries for one connection.
OBJECT-TYPE    
  INTEGER  

rtIPMapConnIndex 1.3.6.1.4.1.434.2.2.8.34.1.2
Indicates the connection which uses this mapping. It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtIPMapEntryStatus 1.3.6.1.4.1.434.2.2.8.34.1.3
The object used to reserve the mapping entry during the row creation. It also indicates if the entry is valid or not.
OBJECT-TYPE    
  EntryStatus  

rtIPMapNextHop 1.3.6.1.4.1.434.2.2.8.34.1.4
The address of the next hop. It is indicated if the Management station knows the address and it can not be discovered by the router.
OBJECT-TYPE    
  IpAddress  

rtIPMapBroadcast 1.3.6.1.4.1.434.2.2.8.34.1.5
The object which indicates to the router if it may send broadcasts for this connection. 'Yes' is the default value.
OBJECT-TYPE    
  INTEGER broadNo(1), broadYes(2)  

rtIPMapIPMask 1.3.6.1.4.1.434.2.2.8.34.1.6
The IP address mask to be used for this mapping.
OBJECT-TYPE    
  IpAddress  

rtIPMapVJCompress 1.3.6.1.4.1.434.2.2.8.34.1.7
The object which indicates if the VanJacobsen compression is to be used for this mapping.
OBJECT-TYPE    
  INTEGER vjNo(1), vjYes(2)  

rtCircuitTable 1.3.6.1.4.1.434.2.2.8.35
The router circuit table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtCircuitEntry

rtCircuitEntry 1.3.6.1.4.1.434.2.2.8.35.1
The circuit information for one WAN connection. An entry in this table will be created by the Agent when the circuit is opened for a specified connection.
OBJECT-TYPE    
  RtCircuitEntry  

rtCircuitConnIndex 1.3.6.1.4.1.434.2.2.8.35.1.1
Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtCircuitStatus 1.3.6.1.4.1.434.2.2.8.35.1.2
Indicates the circuit status.
OBJECT-TYPE    
  INTEGER listening(1), calling(2), connected(3), hangingup(4), hungup(5), aborted(6), idle(7), portdisconnected(8), notbound(9), unknown(10)  

rtCircuitTimeUp 1.3.6.1.4.1.434.2.2.8.35.1.3
Time elapsed since this circuit was started.
OBJECT-TYPE    
  TimeTicks  

rtCircuitErrCode 1.3.6.1.4.1.434.2.2.8.35.1.4
Last error code returned from the EiconCard.
OBJECT-TYPE    
  INTEGER  

rtCircuitSessionType 1.3.6.1.4.1.434.2.2.8.35.1.5
Type of circuit session.
OBJECT-TYPE    
  INTEGER  

rtCircuitConnLSN 1.3.6.1.4.1.434.2.2.8.35.1.6
Connection Manager LSN used for management.
OBJECT-TYPE    
  INTEGER  

rtCircuitDataLSN 1.3.6.1.4.1.434.2.2.8.35.1.7
Connection Manager LSN used for data.
OBJECT-TYPE    
  INTEGER  

rtCircuitCmSelector 1.3.6.1.4.1.434.2.2.8.35.1.8
Handle returned by Connection Manager for this circuit.
OBJECT-TYPE    
  INTEGER  

rtCircuitCompression 1.3.6.1.4.1.434.2.2.8.35.1.9
Compression on/off, after negotiation.
OBJECT-TYPE    
  INTEGER  

rtCircuitCompAlgorithm 1.3.6.1.4.1.434.2.2.8.35.1.10
Compression type, after negotiation.
OBJECT-TYPE    
  INTEGER  

rtCircuitBeforeComp 1.3.6.1.4.1.434.2.2.8.35.1.11
Number of bytes sent before compression.
OBJECT-TYPE    
  Gauge  

rtCircuitAfterComp 1.3.6.1.4.1.434.2.2.8.35.1.12
Number of bytes sent after compression.
OBJECT-TYPE    
  Gauge  

rtCircuitTxErr 1.3.6.1.4.1.434.2.2.8.35.1.13
The number of Transmit errors
OBJECT-TYPE    
  INTEGER  

rtCircuitBoundLANProtocol 1.3.6.1.4.1.434.2.2.8.35.1.14
The mask used to indicate the type of LAN protocols used for this connection. Possible values are: IPX=1, IP=2, AT=4.
OBJECT-TYPE    
  INTEGER  

rtCircuitRemoteRouter 1.3.6.1.4.1.434.2.2.8.35.1.15
The name of the remote router discovered by the local router.
OBJECT-TYPE    
  DisplayString SIZE(1..48)  

rtCircuitCountersReset 1.3.6.1.4.1.434.2.2.8.35.1.16
The object is used to reset all counters for this circuit.
OBJECT-TYPE    
  ControlOnOff  

rtCircuitWanProtocol 1.3.6.1.4.1.434.2.2.8.35.1.17
The object indicates which WAN protocol will be used for this connection.
OBJECT-TYPE    
  INTEGER connX25Svc(1), connX25Pvc(2), connFr(3), connPpp(4), connSna(5), connHdlc(6)  

rtCircuitX25LocalDTE 1.3.6.1.4.1.434.2.2.8.35.1.18
The X25 Local DTE Address for this circuit
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

rtCircuitX25RemoteDTE 1.3.6.1.4.1.434.2.2.8.35.1.19
The X25 Remote DTE Address for this circuit
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

rtCircuitX25CallingFacilities 1.3.6.1.4.1.434.2.2.8.35.1.20
The X25 Calling Facilities for this circuit
OBJECT-TYPE    
  DisplayString SIZE(1..218)  

rtCircuitX25ListeningFacilities 1.3.6.1.4.1.434.2.2.8.35.1.21
The X25 Listening Facilities for this circuit
OBJECT-TYPE    
  DisplayString SIZE(1..218)  

rtCircuitX25UserData 1.3.6.1.4.1.434.2.2.8.35.1.22
The X25 User Data for this circuit
OBJECT-TYPE    
  DisplayString SIZE(1..256)  

rtCircuitX25Cause 1.3.6.1.4.1.434.2.2.8.35.1.23
The Cause of Circuit connection failure
OBJECT-TYPE    
  INTEGER  

rtCircuitX25Diag 1.3.6.1.4.1.434.2.2.8.35.1.24
Diagnostics code of the Circuit connection failure.
OBJECT-TYPE    
  INTEGER  

rtCircuitX25Pvc 1.3.6.1.4.1.434.2.2.8.35.1.25
The X25 PVC for this circuit.
OBJECT-TYPE    
  INTEGER  

rtCircuitFrDlci 1.3.6.1.4.1.434.2.2.8.35.1.26
The Frame Relay DLCI for this circuit.
OBJECT-TYPE    
  INTEGER  

rtCircuitFrSegmentation 1.3.6.1.4.1.434.2.2.8.35.1.27
The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this circuit.
OBJECT-TYPE    
  INTEGER no(1), yes(2), inProgress(3)  

rtCircuitFrXIDNegot 1.3.6.1.4.1.434.2.2.8.35.1.28
The object used to indicate if the Frame Relay XID (RFC1490) can be used on this circuit.
OBJECT-TYPE    
  INTEGER no(1), yes(2), inProgress(3)  

rtCircuitFrXIDPacketSize 1.3.6.1.4.1.434.2.2.8.35.1.29
The size of the Frame Relay XID packet.
OBJECT-TYPE    
  INTEGER  

rtCircuitFrCongestion 1.3.6.1.4.1.434.2.2.8.35.1.30
The object indicates if Frame Relay can be congested on this circuit.
OBJECT-TYPE    
  INTEGER noCongestion(1), congested(2)  

rtCircuitIPTable 1.3.6.1.4.1.434.2.2.8.36
The router IP info table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtCircuitIPEntry

rtCircuitIPEntry 1.3.6.1.4.1.434.2.2.8.36.1
The circuit information specific to IP.
OBJECT-TYPE    
  RtCircuitIPEntry  

rtCircuitIPConnIndex 1.3.6.1.4.1.434.2.2.8.36.1.1
Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtCircuitIPRemoteAddress 1.3.6.1.4.1.434.2.2.8.36.1.2
Remote router IP address.
OBJECT-TYPE    
  IpAddress  

rtCircuitIPLocalAddress 1.3.6.1.4.1.434.2.2.8.36.1.3
Local router IP address.
OBJECT-TYPE    
  IpAddress  

rtCircuitIPTxPackets 1.3.6.1.4.1.434.2.2.8.36.1.4
Number of transmit packets which carry IP.
OBJECT-TYPE    
  Counter  

rtCircuitIPTxBytes 1.3.6.1.4.1.434.2.2.8.36.1.5
Number of transmit bytes which carry IP.
OBJECT-TYPE    
  Counter  

rtCircuitIPRxPackets 1.3.6.1.4.1.434.2.2.8.36.1.6
Number of received packets which carry IP.
OBJECT-TYPE    
  Counter  

rtCircuitIPRxBytes 1.3.6.1.4.1.434.2.2.8.36.1.7
Number of received bytes which carry IP.
OBJECT-TYPE    
  Counter  

rtCircuitIPXTable 1.3.6.1.4.1.434.2.2.8.37
The router IPX info table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtCircuitIPXEntry

rtCircuitIPXEntry 1.3.6.1.4.1.434.2.2.8.37.1
The circuit information.
OBJECT-TYPE    
  RtCircuitIPXEntry  

rtCircuitIPXConnIndex 1.3.6.1.4.1.434.2.2.8.37.1.1
Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtCircuitIPXRemoteNode 1.3.6.1.4.1.434.2.2.8.37.1.2
Remote router node address.
OBJECT-TYPE    
  OCTET STRING SIZE(1..6)  

rtCircuitIPXRemoteNetwork 1.3.6.1.4.1.434.2.2.8.37.1.3
Remote router network address.
OBJECT-TYPE    
  OCTET STRING SIZE(1..4)  

rtCircuitIPXLocalNode 1.3.6.1.4.1.434.2.2.8.37.1.4
Local router node address.
OBJECT-TYPE    
  OCTET STRING SIZE(1..6)  

rtCircuitIPXLocalNetwork 1.3.6.1.4.1.434.2.2.8.37.1.5
Local router network address.
OBJECT-TYPE    
  OCTET STRING SIZE(1..4)  

rtCircuitIPXTxPackets 1.3.6.1.4.1.434.2.2.8.37.1.6
Number of transmit packets which carry IPX.
OBJECT-TYPE    
  Counter  

rtCircuitIPXTxBytes 1.3.6.1.4.1.434.2.2.8.37.1.7
Number of transmit bytes which carry IPX.
OBJECT-TYPE    
  Counter  

rtCircuitIPXRxPackets 1.3.6.1.4.1.434.2.2.8.37.1.8
Number of received packets which carry IPX.
OBJECT-TYPE    
  Counter  

rtCircuitIPXRxBytes 1.3.6.1.4.1.434.2.2.8.37.1.9
Number of received bytes which carry IPX.
OBJECT-TYPE    
  Counter  

rtCircuitATTable 1.3.6.1.4.1.434.2.2.8.38
The router AT info table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtCircuitATEntry

rtCircuitATEntry 1.3.6.1.4.1.434.2.2.8.38.1
The AT circuit information.
OBJECT-TYPE    
  RtCircuitATEntry  

rtCircuitATConnIndex 1.3.6.1.4.1.434.2.2.8.38.1.1
Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
OBJECT-TYPE    
  INTEGER  

rtCircuitATRemoteNet 1.3.6.1.4.1.434.2.2.8.38.1.2
Remote router network address.
OBJECT-TYPE    
  OCTET STRING SIZE(1..2)  

rtCircuitATRemoteNode 1.3.6.1.4.1.434.2.2.8.38.1.3
Remote router node address.
OBJECT-TYPE    
  OCTET STRING SIZE(1..1)  

rtCircuitATLocalNet 1.3.6.1.4.1.434.2.2.8.38.1.4
Local router network address.
OBJECT-TYPE    
  OCTET STRING SIZE(1..2)  

rtCircuitATLocalNode 1.3.6.1.4.1.434.2.2.8.38.1.5
Local router node address.
OBJECT-TYPE    
  OCTET STRING SIZE(1..1)  

rtCircuitATTxPackets 1.3.6.1.4.1.434.2.2.8.38.1.6
Number of transmit packets which carry AT.
OBJECT-TYPE    
  Counter  

rtCircuitATTxBytes 1.3.6.1.4.1.434.2.2.8.38.1.7
Number of transmit bytes which carry AT.
OBJECT-TYPE    
  Counter  

rtCircuitATRxPackets 1.3.6.1.4.1.434.2.2.8.38.1.8
Number of received packets which carry AT.
OBJECT-TYPE    
  Counter  

rtCircuitATRxBytes 1.3.6.1.4.1.434.2.2.8.38.1.9
Number of received bytes which carry AT.
OBJECT-TYPE    
  Counter  

rtMaxIPFilter 1.3.6.1.4.1.434.2.2.8.39
The maximum number of IP Filters that can be configured for this router.
OBJECT-TYPE    
  INTEGER  

rtAvailableIPFilter 1.3.6.1.4.1.434.2.2.8.40
The number of IP Filters still available for this router.
OBJECT-TYPE    
  Gauge  

rtIPFilterDropStatsIn 1.3.6.1.4.1.434.2.2.8.41
Total number of incoming packets dropped.
OBJECT-TYPE    
  Counter  

rtIPFilterDropStatsOut 1.3.6.1.4.1.434.2.2.8.42
Total number of outgoing packets dropped.
OBJECT-TYPE    
  Counter  

rtIPFilterForwardStatsIn 1.3.6.1.4.1.434.2.2.8.43
Total number of incoming packets forwarded.
OBJECT-TYPE    
  Counter  

rtIPFilterForwardStatsOut 1.3.6.1.4.1.434.2.2.8.44
Total number of outgoing packets forwarded.
OBJECT-TYPE    
  Counter  

rtIPFilterFreeIndex 1.3.6.1.4.1.434.2.2.8.45
This number indicating to the Manager the next available rtIPFilterIndex for a new Entry in the rtIPFilterTable (0 for none). The Manager will first get this value from the Agent and then use it to attempt to create an entry with that index value for any connection.
OBJECT-TYPE    
  INTEGER  

rtIPFilterTable 1.3.6.1.4.1.434.2.2.8.46
The IP Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    RtIPFilterEntry

rtIPFilterEntry 1.3.6.1.4.1.434.2.2.8.46.1
Information on an IP Filter.
OBJECT-TYPE    
  RtIPFilterEntry  

rtIPFilterConnIndex 1.3.6.1.4.1.434.2.2.8.46.1.1
Same as rtConnIndex.
OBJECT-TYPE    
  INTEGER  

rtIPFilterIndex 1.3.6.1.4.1.434.2.2.8.46.1.2
Index of IP Filter for the connection.
OBJECT-TYPE    
  INTEGER  

rtIPFilterEntryStatus 1.3.6.1.4.1.434.2.2.8.46.1.3
The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
OBJECT-TYPE    
  EntryStatusV2  

rtIPFilterOperState 1.3.6.1.4.1.434.2.2.8.46.1.4
The object indicates the state of the IP Filter.
OBJECT-TYPE    
  OperState  

rtIPFilterAdminStateCtr 1.3.6.1.4.1.434.2.2.8.46.1.5
The object used to start and stop the IP Filter.
OBJECT-TYPE    
  AdminState  

rtIPFilterPosition 1.3.6.1.4.1.434.2.2.8.46.1.6
This variable indicates the order that the router should apply each filter. This field can be set only when adding a new IP Filter for a connection. The manager should use a valid rtIPFilterIndex to set this variable. The new filter will be inserted after the corresponding filter. To insert the filter at the beginning for the connection, set the variable to 0.
OBJECT-TYPE    
  INTEGER  

rtIPFilterAction 1.3.6.1.4.1.434.2.2.8.46.1.7
Drop (1) or Forward (2) the information.
OBJECT-TYPE    
  INTEGER drop(1), forward(2)  

rtIPFilterDirection 1.3.6.1.4.1.434.2.2.8.46.1.8
Specifies if the filter is applied to outgoing, incoming or both ways packets.
OBJECT-TYPE    
  INTEGER in(1), out(2), all(3)  

rtIPFilterPortType 1.3.6.1.4.1.434.2.2.8.46.1.9
Protocol type.
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), all(3)  

rtIPFilterLowSrcPort 1.3.6.1.4.1.434.2.2.8.46.1.10
Low Source Port.
OBJECT-TYPE    
  INTEGER  

rtIPFilterHighSrcPort 1.3.6.1.4.1.434.2.2.8.46.1.11
High Source Port.
OBJECT-TYPE    
  INTEGER  

rtIPFilterLowDestPort 1.3.6.1.4.1.434.2.2.8.46.1.12
Low Destination Port.
OBJECT-TYPE    
  INTEGER  

rtIPFilterHighDestPort 1.3.6.1.4.1.434.2.2.8.46.1.13
High Destination Port.
OBJECT-TYPE    
  INTEGER  

rtIPFilterIPAddressSrc 1.3.6.1.4.1.434.2.2.8.46.1.14
Source IP Address.
OBJECT-TYPE    
  IpAddress  

rtIPFilterIPMaskSrc 1.3.6.1.4.1.434.2.2.8.46.1.15
Mask of the source IP Address.
OBJECT-TYPE    
  IpAddress  

rtIPFilterIPAddressDest 1.3.6.1.4.1.434.2.2.8.46.1.16
Destination IP Address.
OBJECT-TYPE    
  IpAddress  

rtIPFilterIPMaskDest 1.3.6.1.4.1.434.2.2.8.46.1.17
Mask of the destination IP Address.
OBJECT-TYPE    
  IpAddress  

rtIPFilterStatsIn 1.3.6.1.4.1.434.2.2.8.46.1.18
The number of incoming packets that match the filter.
OBJECT-TYPE    
  Counter  

rtIPFilterStatsOut 1.3.6.1.4.1.434.2.2.8.46.1.19
The number of outgoing packets that match the filter.
OBJECT-TYPE    
  Counter  

rtActionState 1.3.6.1.4.1.434.2.2.8.47
The state of the operation performed on the router by the Agent as a result of setting the values to the 'rtAdminStateCtrl'. The Management station will poll that variable after initiating an action on the router. The value done(1) indicates that the action terminated successfully. The value failed(2) indicates that the action terminated with an error. In this case the variable 'rtActionError' indicates the error code.
OBJECT-TYPE    
  ActionState  

rtActionError 1.3.6.1.4.1.434.2.2.8.48
The error code after the unsuccessful operation.
OBJECT-TYPE    
  INTEGER no-error(0), err-ALREADY-STARTED(1), err-NOT-STARTED(2), err-STACK-NOT-BOUND(3), err-SHUTDOWN-FAILURE(4), err-General(99)  

Defined Objects

OperState  
INTEGER other(1), disabled(2), ready(3), active(4), busy(5)    

AdminState  
INTEGER start(1), stop(2), dump(3), test(4), invalid(5)    

ActionState  
INTEGER done(1), failed(2), in-progress(3)    

EntryStatus  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)    

EntryStatusV2  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4), modifyRequest(5), underModification(6)    

ConnectionStatus  
INTEGER invalid(1), listening(2), calling(3), connected(4), hangingup(5), hungup(6), pending-hungup(7)    

ControlOnOff  
INTEGER stop(1), start(2), invalid(3)    

CardRef  
INTEGER 1..6    

PortRef  
INTEGER 1..48    

PositiveInteger  
INTEGER 0..2147483647    

RtPortEntry  
SEQUENCE    
  INTEGER as rtPortIndex  
  INTEGER as rtPortNumber  
  INTEGER as rtPortProtocol  
  Gauge as rtPortTxThroughput  
  Gauge as rtPortRxThroughput  
  Counter as rtPortTxPackets  
  Counter as rtPortTxBytesLow  
  Counter as rtPortTxBytesHigh  
  Counter as rtPortRxPackets  
  Counter as rtPortRxBytesLow  
  Counter as rtPortRxBytesHigh  
  Counter as rtPortTxDropNoResource  
  Counter as rtPortRxError  
  ControlOnOff as rtPortCountersReset  

RtConnEntry  
SEQUENCE    
  INTEGER as rtConnIndex  
  DisplayString as rtConnName  
  DisplayString as rtConnComment  
  EntryStatus as rtConnEntryStatus  
  OperState as rtConnOperState  
  AdminState as rtConnAdminStateCtr  
  INTEGER as rtConnAutoStart  
  INTEGER as rtConnType  
  INTEGER as rtConnInactivityTimeout  
  PortRef as rtConnPortNumber  
  INTEGER as rtConnCompression  
  INTEGER as rtConnRetryNum  
  INTEGER as rtConnRetryDelay  
  INTEGER as rtConnPeerRouter  
  INTEGER as rtConnLanProtocol  
  INTEGER as rtConnWanProtocol  
  DisplayString as rtConnX25LocalDTE  
  DisplayString as rtConnX25RemoteDTE  
  DisplayString as rtConnX25CallingFacilities  
  DisplayString as rtConnX25ListeningFacilities  
  DisplayString as rtConnX25UserData  
  INTEGER as rtConnX25Pvc  
  INTEGER as rtConnFrDlci  
  DisplayString as rtConnSnaPuName  
  DisplayString as rtConnSnaLocalFqName  
  DisplayString as rtConnSnaRemoteFqName  
  DisplayString as rtConnSnaModeName  
  INTEGER as rtConnSnaSendPaceWindow  
  INTEGER as rtConnSnaReceivePaceWindow  
  INTEGER as rtConnSnaRuSendLow  
  INTEGER as rtConnSnaRuReceiveLow  
  INTEGER as rtConnSnaRuSendHigh  
  INTEGER as rtConnSnaRuReceiveHigh  
  INTEGER as rtConnUsage  
  INTEGER as rtConnFrSegmentation  
  INTEGER as rtConnFrXid  
  DisplayString as rtConnPrimOrBackName  
  INTEGER as rtConnRipSapUpdateType  
  INTEGER as rtConnSAPDelay  
  INTEGER as rtConnRIPDelay  

RtIPMappingEntry  
SEQUENCE    
  INTEGER as rtIPMapIndex  
  INTEGER as rtIPMapConnIndex  
  EntryStatus as rtIPMapEntryStatus  
  IpAddress as rtIPMapNextHop  
  INTEGER as rtIPMapBroadcast  
  IpAddress as rtIPMapIPMask  
  INTEGER as rtIPMapVJCompress  

RtCircuitEntry  
SEQUENCE    
  INTEGER as rtCircuitConnIndex  
  INTEGER as rtCircuitStatus  
  TimeTicks as rtCircuitTimeUp  
  INTEGER as rtCircuitErrCode  
  INTEGER as rtCircuitSessionType  
  INTEGER as rtCircuitConnLSN  
  INTEGER as rtCircuitDataLSN  
  INTEGER as rtCircuitCmSelector  
  INTEGER as rtCircuitCompression  
  INTEGER as rtCircuitCompAlgorithm  
  Gauge as rtCircuitBeforeComp  
  Gauge as rtCircuitAfterComp  
  INTEGER as rtCircuitTxErr  
  INTEGER as rtCircuitBoundLANProtocol  
  DisplayString as rtCircuitRemoteRouter  
  ControlOnOff as rtCircuitCountersReset  
  INTEGER as rtCircuitWanProtocol  
  DisplayString as rtCircuitX25LocalDTE  
  DisplayString as rtCircuitX25RemoteDTE  
  DisplayString as rtCircuitX25CallingFacilities  
  DisplayString as rtCircuitX25ListeningFacilities  
  DisplayString as rtCircuitX25UserData  
  INTEGER as rtCircuitX25Cause  
  INTEGER as rtCircuitX25Diag  
  INTEGER as rtCircuitX25Pvc  
  INTEGER as rtCircuitFrDlci  
  INTEGER as rtCircuitFrSegmentation  
  INTEGER as rtCircuitFrXIDNegot  
  INTEGER as rtCircuitFrXIDPacketSize  
  INTEGER as rtCircuitFrCongestion  

RtCircuitIPEntry  
SEQUENCE    
  INTEGER as rtCircuitIPConnIndex  
  IpAddress as rtCircuitIPRemoteAddress  
  IpAddress as rtCircuitIPLocalAddress  
  Counter as rtCircuitIPTxPackets  
  Counter as rtCircuitIPTxBytes  
  Counter as rtCircuitIPRxPackets  
  Counter as rtCircuitIPRxBytes  

RtCircuitIPXEntry  
SEQUENCE    
  INTEGER as rtCircuitIPXConnIndex  
  OCTET STRING as rtCircuitIPXRemoteNode  
  OCTET STRING as rtCircuitIPXRemoteNetwork  
  OCTET STRING as rtCircuitIPXLocalNode  
  OCTET STRING as rtCircuitIPXLocalNetwork  
  Counter as rtCircuitIPXTxPackets  
  Counter as rtCircuitIPXTxBytes  
  Counter as rtCircuitIPXRxPackets  
  Counter as rtCircuitIPXRxBytes  

RtCircuitATEntry  
SEQUENCE    
  INTEGER as rtCircuitATConnIndex  
  OCTET STRING as rtCircuitATRemoteNet  
  OCTET STRING as rtCircuitATRemoteNode  
  OCTET STRING as rtCircuitATLocalNet  
  OCTET STRING as rtCircuitATLocalNode  
  Counter as rtCircuitATTxPackets  
  Counter as rtCircuitATTxBytes  
  Counter as rtCircuitATRxPackets  
  Counter as rtCircuitATRxBytes  

RtIPFilterEntry  
SEQUENCE    
  INTEGER as rtIPFilterConnIndex  
  INTEGER as rtIPFilterIndex  
  EntryStatusV2 as rtIPFilterEntryStatus  
  OperState as rtIPFilterOperState  
  AdminState as rtIPFilterAdminStateCtr  
  INTEGER as rtIPFilterPosition  
  INTEGER as rtIPFilterAction  
  INTEGER as rtIPFilterDirection  
  INTEGER as rtIPFilterPortType  
  INTEGER as rtIPFilterLowSrcPort  
  INTEGER as rtIPFilterHighSrcPort  
  INTEGER as rtIPFilterLowDestPort  
  INTEGER as rtIPFilterHighDestPort  
  IpAddress as rtIPFilterIPAddressSrc  
  IpAddress as rtIPFilterIPMaskSrc  
  IpAddress as rtIPFilterIPAddressDest  
  IpAddress as rtIPFilterIPMaskDest  
  Counter as rtIPFilterStatsIn  
  Counter as rtIPFilterStatsOut