ENTERASYS-MULTI-AUTH-MIB

File: ENTERASYS-MULTI-AUTH-MIB.mib (35598 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB INET-ADDRESS-MIB ENTERASYS-UPN-TC-MIB
ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Integer32 Gauge32
TEXTUAL-CONVENTION TruthValue TimeStamp
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
ifIndex InetAddressType InetAddress
StationAddressType StationAddress etsysModules

Defined Objects

etsysMultiAuthMIB 1.3.6.1.4.1.5624.1.2.46
This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to configuration of multiple authentication mechanisms to be run simultaneously on a device.
MODULE-IDENTITY    

etsysMultiAuthObjects 1.3.6.1.4.1.5624.1.2.46.1
OBJECT IDENTIFIER    

etsysMultiAuthNotification 1.3.6.1.4.1.5624.1.2.46.1.0
OBJECT IDENTIFIER    

etsysMultiAuthSuccess 1.3.6.1.4.1.5624.1.2.46.1.0.1
An etsysMultiAuthSuccess trap signifies that the SNMP entity, acting in an agent role, has successfully authenticated a station on one of its interfaces. The included objects of etsysMultiAuthStationAddrType and etsysMultiAuthStationAddr uniquely identify the station that has been authenticated. The interface that the station was authenticated on is specified by the ifIndex object, and the type of authentication used is to authenticate the station is specified by the etsysMultiAuthSessionAgentType object. This trap will only be generated on interfaces that are in the authOptional(3) or authRequired(4) state.
NOTIFICATION-TYPE    
  etsysMultiAuthStationAddrType  
  etsysMultiAuthStationAddr  
  ifIndex  
  etsysMultiAuthSessionAgentType  

etsysMultiAuthFailed 1.3.6.1.4.1.5624.1.2.46.1.0.2
An etsysMultiAuthFailed trap signifies that the SNMP entity, acting in an agent role, has identified a station that attempted and subsequently failed to authenticate on one of its interfaces. The included objects of etsysMultiAuthStationAddrType and etsysMultiAuthStationAddr uniquely identify the station that attempted to authenticate. The interface that the station attempted to authenticate on is specified by the ifIndex object, and the type of authentication attempted is specified by the etsysMultiAuthSessionAgentType object. This trap will only be generated on interfaces that are in the authOptional(3) or authRequired(4) state.
NOTIFICATION-TYPE    
  etsysMultiAuthStationAddrType  
  etsysMultiAuthStationAddr  
  ifIndex  
  etsysMultiAuthSessionAgentType  

etsysMultiAuthTerminated 1.3.6.1.4.1.5624.1.2.46.1.0.3
An etsysMultiAuthTerminated trap signifies that the SNMP entity, acting in an agent role, has terminated the authentication of a station on one of its interfaces. The included objects of etsysMultiAuthStationAddrType and etsysMultiAuthStationAddr uniquely identify the station for which authentication was terminated. The interface that the station was previously authenticated on is specified by the ifIndex object, and the type of authentication that the station was terminated for is specified by the etsysMultiAuthSessionAgentType object. This trap will only be generated on interfaces that are in the authOptional(3) or authRequired(4) state.
NOTIFICATION-TYPE    
  etsysMultiAuthStationAddrType  
  etsysMultiAuthStationAddr  
  ifIndex  
  etsysMultiAuthSessionAgentType  

etsysMultiAuthMaxNumUsersReached 1.3.6.1.4.1.5624.1.2.46.1.0.4
An etsysMultiAuthMaxNumUsersReached trap signifies that the SNMP entity, acting in an agent role, has an interface where subsequent to a successful authentication, the number of current sessions on the interface equals the maximum number of sessions allowed for that interface. The interface that the maximum number of sessions has been reached is specified by the ifIndex object.
NOTIFICATION-TYPE    
  ifIndex  

etsysMultiAuthSystem 1.3.6.1.4.1.5624.1.2.46.1.1
OBJECT IDENTIFIER    

etsysMultiAuthSystemSupportedTypes 1.3.6.1.4.1.5624.1.2.46.1.1.1
This object specifies that authentication types that the device supports. A bit will be set for each corresponding type that is supported.
OBJECT-TYPE    
  BITS ieee8021x(0), pwa(1), macAuth(2)  

etsysMultiAuthSystemMaxNumUsers 1.3.6.1.4.1.5624.1.2.46.1.1.2
The maximum number of users the can be actively authenticated or have authentications in progress at one time in the system.
OBJECT-TYPE    
  Unsigned32  

etsysMultiAuthSystemCurrentNumUsers 1.3.6.1.4.1.5624.1.2.46.1.1.3
The current number of users the are actively authenticated, have authentications in progress, or the device is keeping authentication termination information for in the system.
OBJECT-TYPE    
  Gauge32  

etsysMultiAuthSystemMode 1.3.6.1.4.1.5624.1.2.46.1.1.4
The value strictIeee8021x(1) will cause the device to authenticate in strict adherence to IEEE Std. 802.1X-2001. In this mode no other authentication mechanisms will be active. While in this mode, changes may be made to other objects in the MIB, but they will have no effect on the operation of the device until such time as the system mode is changed to etsysMultiAuth(2). A set of this object to a value of etsysMultiAuth(2) will cause the device to authenticate using multiple authenticators simultaneously.
OBJECT-TYPE    
  INTEGER strictIeee8021x(1), etsysMultiAuth(2)  

etsysMultiAuthSystemDefaultPrecedence 1.3.6.1.4.1.5624.1.2.46.1.1.5
The precedence that authentication results will be applied to network traffic by default. This object will have a size equal to the number of enumerations specified by the EtsysMultiAuthTypes textual convention.
OBJECT-TYPE    
  EtsysMultiAuthTypePrecedence  

etsysMultiAuthSystemAdminPrecedence 1.3.6.1.4.1.5624.1.2.46.1.1.6
This object allows one to modify the default precedence by which authentication results will be applied to network traffic. Sets to this object are not required to specify all of the types that the device supports. If less types are specified than are supported, then all types that were not specified will be given an operational precedence based on that type's default precedence relative to the last type specified. For example, if the default precedence is '030102'H and the object is set to '02'H then operational precedence would be '020301'H. A set to this object of a zero length octet string will clear the administrative precedence. In this case the operational precedence would be equal to the default precedence.
OBJECT-TYPE    
  EtsysMultiAuthTypePrecedence  

etsysMultiAuthSystemOperPrecedence 1.3.6.1.4.1.5624.1.2.46.1.1.7
This object returns the operational precedence of authentication types as they will be applied to network traffic. The value returned by this object is the calculated result of the etsysMultiAuthSystemDefaultPrecedence and etsysMultiAuthSystemAdminPrecedence objects. This object will have a size equal to the number of enumerations specified by the EtsysMultiAuthTypes textual convention.
OBJECT-TYPE    
  EtsysMultiAuthTypePrecedence  

etsysMultiAuthPort 1.3.6.1.4.1.5624.1.2.46.1.2
OBJECT IDENTIFIER    

etsysMultiAuthPortTable 1.3.6.1.4.1.5624.1.2.46.1.2.1
A table of per port information and configuration for user authentication.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysMultiAuthPortEntry

etsysMultiAuthPortEntry 1.3.6.1.4.1.5624.1.2.46.1.2.1.1
An entry containing per port authentication data. Only interfaces that are able to authenticate users are represented in this table.
OBJECT-TYPE    
  EtsysMultiAuthPortEntry  

etsysMultiAuthPortMode 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.1
This object specifies the authorization mode to use for packets received on this interface. A value of forceUnauthorized(1) indicates that the interface is always unauthenticated. A value of forceAuthorized(2) indicates that users on this port will always be considered to be authenticated. A value of authOptional(3) indicates that authentication is optional on this interface. Packets received from unauthenticated users on the interface will be processed using the static configuration of the interface. Users may promote the policy applied to their traffic by actively authenticating on this interface. A value of authRequired(4) indicates that all packets received on the interface will be dropped until authentication succeeds. Some authentication types, such as PWA, will not be fully functional in this mode of operation.
OBJECT-TYPE    
  INTEGER forceUnauthorized(1), forceAuthorized(2), authOptional(3), authRequired(4)  

etsysMultiAuthPortMaxNumUsers 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.2
The maximum number of users that can be actively authenticated or have authentications in progress at one time on this interface.
OBJECT-TYPE    
  Unsigned32  

etsysMultiAuthPortNumUsersAllowed 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.3
The user configured number of users that can be actively authenticated or have authentications in progress at one time on this interface. This object has a default value equal to the value of etsysMultiAuthPortMaxNumUsers for this interface. If the value set to this object is less than its current value, it will have the same effect as setting the etsysMultiAuthPortClearUsers object to a value of true(1).
OBJECT-TYPE    
  Unsigned32  

etsysMultiAuthPortCurrentNumUsers 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.4
The current number of users that are actively authenticated or have authentications in progress at one time on this interface. By definition this value can not exceed the value specified by etsysMultiAuthPortMaxNumUsers for the same interface.
OBJECT-TYPE    
  Gauge32  

etsysMultiAuthPortClearUsers 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.5
Setting this object to a value of true(1) will cause all users that are currently authenticated or that have authentications in progress on this interface to become unauthenticated. This will cause any such entries with matching ifIndex values in the etsysMultiAuthSessionStationTable tables to change their authorization status to authTerminated(5). Setting this object to a value of false(2) has no effect. This object will always return a value of false(2).
OBJECT-TYPE    
  TruthValue  

etsysMultiAuthPortTrapEnable 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6
This object allows for the enabling or disabling of each trap on a per interface basis. Setting a given bit to a value of 1 allows traps of that type to be sent for events on that interface. Setting a given bit to a value of 0 disallows traps of that type to be sent for events on that interface. The individual bits correlate to specific traps as follows: BIT NOTIFICATION ---------------------------------------------------------------- authSuccessTrap(0) etsysMultiAuthSuccess authFailedTrap(1) etsysMultiAuthFailed authTerminatedTrap(2) etsysMultiAuthTerminated maxNumUsersReachedTrap(3) etsysMultiAuthMaxNumUsersReached
OBJECT-TYPE    
  BITS authSuccessTrap(0), authFailedTrap(1), authTerminatedTrap(2), maxNumUsersReachedTrap(3)  

etsysMultiAuthStation 1.3.6.1.4.1.5624.1.2.46.1.3
OBJECT IDENTIFIER    

etsysMultiAuthStationTable 1.3.6.1.4.1.5624.1.2.46.1.3.1
A table of station configuration on specific interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysMultiAuthStationEntry

etsysMultiAuthStationEntry 1.3.6.1.4.1.5624.1.2.46.1.3.1.1
An entry containing authentication information on a per station, per port basis. Only interfaces that are able to authenticate users are represented in this table.
OBJECT-TYPE    
  EtsysMultiAuthStationEntry  

etsysMultiAuthStationAddrType 1.3.6.1.4.1.5624.1.2.46.1.3.1.1.1
The type of station represented by etsysMultiAuthStationAddr.
OBJECT-TYPE    
  StationAddressType  

etsysMultiAuthStationAddr 1.3.6.1.4.1.5624.1.2.46.1.3.1.1.2
The station address for the authenticated user.
OBJECT-TYPE    
  StationAddress  

etsysMultiAuthStationClearUsers 1.3.6.1.4.1.5624.1.2.46.1.3.1.1.3
Setting this object to a value of true(1) will cause any users with the specified station address that are currently authenticated or that have authentications in progress to become unauthenticated. This will cause any entries with matching etsysMultiAuthStationAddr values in the etsysMultiAuthSessionStationTable tables to change their authorization status to authTerminated(5). Setting this object to a value of false(2) has no effect. This object will always return a value of false(2).
OBJECT-TYPE    
  TruthValue  

etsysMultiAuthSession 1.3.6.1.4.1.5624.1.2.46.1.4
OBJECT IDENTIFIER    

etsysMultiAuthSessionStationTable 1.3.6.1.4.1.5624.1.2.46.1.4.1
A table of session information and configuration for user authentication. Entries in this table represent users in various stages of authentication. Entries that do not have a etsysMultiAuthSessionStationAuthStatus value of authSuccess(1) or authInProgress(3) MAY be removed by the agent as required in order to free resources for new user authentications.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysMultiAuthSessionStationEntry

etsysMultiAuthSessionStationEntry 1.3.6.1.4.1.5624.1.2.46.1.4.1.1
An entry containing authentication information on a per station, per port, per authentication agent type basis. Only interfaces that are able to authenticate users are represented in this table.
OBJECT-TYPE    
  EtsysMultiAuthSessionStationEntry  

etsysMultiAuthSessionAgentType 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.1
The type of authentication agent for this session.
OBJECT-TYPE    
  EtsysMultiAuthTypes  

etsysMultiAuthSessionStationAuthStatus 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.2
The status of authentication for this session.
OBJECT-TYPE    
  EtsysMultiAuthStatus  

etsysMultiAuthSessionAuthAttemptTime 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.3
The value of sysUpTime when this session last attempted authorization. For entries that have a value of authInProgress(3) for etsysMultiAuthSessionAuthStatus this object may return a value of zero.
OBJECT-TYPE    
  TimeStamp  

etsysMultiAuthSessionAuthServerType 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.4
The type of authentication server used to authenticate this session.
OBJECT-TYPE    
  INTEGER radius(1)  

etsysMultiAuthSessionAuthServerAddrType 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.5
The type of data returned by etsysMultiAuthSessionAuthServerAddr.
OBJECT-TYPE    
  InetAddressType  

etsysMultiAuthSessionAuthServerAddr 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.6
The network address of the authentication server for this session.
OBJECT-TYPE    
  InetAddress  

etsysMultiAuthSessionPolicyIndex 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.7
The Policy Profile Index returned from the authentication server for this session. The value of zero indicates that no policy will be applied for this session. If the etsysMultiAuthSessionAuthStatus object returns a value of authSuccess(1), then a value of zero is the result of the policy not being configured on the authorization server. For all other values of etsysMultiAuthSessionAuthStatus a value of zero for this object is the result of authorization not succeeding or not having completed. All values other than zero are valid Policy Profile Indexes that specify the policy profile the user will receive on this interface. If a given user has been authenticated by multiple authentication types on the same interface the policy that is applied to the user's packets is determined by the precedence of the agents as specified by etsysMultiAuthSystemOperPrecedence. These indexes are suitable for indexing in the ENTERASYS-POLICY-PROFILE-MIB.
OBJECT-TYPE    
  Integer32 0 | 1..65535  

etsysMultiAuthSessionIsApplied 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.8
This object indicates whether this entry and the policy index contained within it are actively being applied to traffic matching the interface and station address of this entry. A value of true(1) indicates that this entry is being applied. A value of false(2) indicates that the entry is not being applied. Only one authentication type per interface station address ordered pair may be applied at a single time. The operational precedence of the various authentication types determines which if any type will be applied.
OBJECT-TYPE    
  TruthValue  

etsysMultiAuthSessionPortTable 1.3.6.1.4.1.5624.1.2.46.1.4.2
A table of session information and configuration for user authentication. This table represents the information specified in the etsysMultiAuthSessionStationTable with alternate indexing for faster lookups of data on per port basis.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysMultiAuthSessionPortEntry

etsysMultiAuthSessionPortEntry 1.3.6.1.4.1.5624.1.2.46.1.4.2.1
An entry containing authentication information on a per port, per station, per authentication agent type basis. Only interfaces that are able to authenticate users are represented in this table.
OBJECT-TYPE    
  EtsysMultiAuthSessionPortEntry  

etsysMultiAuthSessionPortAuthStatus 1.3.6.1.4.1.5624.1.2.46.1.4.2.1.1
The status of authentication for this session.
OBJECT-TYPE    
  EtsysMultiAuthStatus  

etsysMultiAuthConformance 1.3.6.1.4.1.5624.1.2.46.2
OBJECT IDENTIFIER    

etsysMultiAuthGroups 1.3.6.1.4.1.5624.1.2.46.2.1
OBJECT IDENTIFIER    

etsysMultiAuthSystemGroup 1.3.6.1.4.1.5624.1.2.46.2.1.1
The system group for all devices supporting Multiple Authentication.
OBJECT-GROUP    

etsysMultiAuthPortBaseGroup 1.3.6.1.4.1.5624.1.2.46.2.1.2
The base level port group for all devices supporting Multiple Authentication.
OBJECT-GROUP    

etsysMultiAuthPortTrapGroup 1.3.6.1.4.1.5624.1.2.46.2.1.3
This group of objects for all devices supporting per interface SNMP notifications.
OBJECT-GROUP    

etsysMultiAuthStationGroup 1.3.6.1.4.1.5624.1.2.46.2.1.4
The station group for all devices supporting Multiple Authentication.
OBJECT-GROUP    

etsysMultiAuthSessionGroup 1.3.6.1.4.1.5624.1.2.46.2.1.5
The session group for all devices supporting Multiple Authentication.
OBJECT-GROUP    

etsysMultiAuthNotificationPortGroup 1.3.6.1.4.1.5624.1.2.46.2.1.6
The group of per interface notifications for Multiple Authentication.
NOTIFICATION-GROUP    

etsysMultiAuthCompliances 1.3.6.1.4.1.5624.1.2.46.2.2
OBJECT IDENTIFIER    

etsysMultiAuthCompliance 1.3.6.1.4.1.5624.1.2.46.2.2.1
The compliance statement for devices that support Multiple Authentication.
MODULE-COMPLIANCE    

Defined Objects

EtsysMultiAuthTypes  
This convention enumerates the authentication types supported by Enterasys Networks' devices.
TEXTUAL-CONVENTION    
  INTEGER ieee8021x(1), pwa(2), macAuth(3)  

EtsysMultiAuthTypePrecedence  
The precedence by which authentication results will be applied to network traffic. This object will have a maximum size equal to the number of enumerations specified by the EtsysMultiAuthTypes textual convention. Each octet in this object represents a specific authentication type. The first octet contains the authentication type with the highest precedence, the second octet contains the type of the next highest precedence, and so forth. For example, a precedence from highest to lowest of ieee8021x(1), macAuth(3), pwa(2) would be represented as '010302'H.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..32)  

EtsysMultiAuthStatus  
The status of authentication for this session. A value of authSuccess(1) means authentication was attempted and succeeded. A value of authFailed(2) means authentication was attempted and failed for a reason other than communication timing out with the authorization server. A value of authInProgress(3) means that the authorization process has been started but has not completed yet. A value of authServerTimeout(4) means that the request to the authorization server for this session timed out without a reply from the server. A value of authTerminated(5) indicates that the session was active or in progress and was subsequently terminated.
TEXTUAL-CONVENTION    
  INTEGER authSuccess(1), authFailed(2), authInProgress(3), authServerTimeout(4), authTerminated(5)  

EtsysMultiAuthPortEntry  
SEQUENCE    
  INTEGER as etsysMultiAuthPortMode  
  Unsigned32 as etsysMultiAuthPortMaxNumUsers  
  Unsigned32 as etsysMultiAuthPortNumUsersAllowed  
  Gauge32 as etsysMultiAuthPortCurrentNumUsers  
  TruthValue as etsysMultiAuthPortClearUsers  
  BITS as etsysMultiAuthPortTrapEnable  

EtsysMultiAuthStationEntry  
SEQUENCE    
  StationAddressType as etsysMultiAuthStationAddrType  
  StationAddress as etsysMultiAuthStationAddr  
  TruthValue as etsysMultiAuthStationClearUsers  

EtsysMultiAuthSessionStationEntry  
SEQUENCE    
  EtsysMultiAuthTypes as etsysMultiAuthSessionAgentType  
  EtsysMultiAuthStatus as etsysMultiAuthSessionStationAuthStatus  
  TimeStamp as etsysMultiAuthSessionAuthAttemptTime  
  INTEGER as etsysMultiAuthSessionAuthServerType  
  InetAddressType as etsysMultiAuthSessionAuthServerAddrType  
  InetAddress as etsysMultiAuthSessionAuthServerAddr  
  Integer32 as etsysMultiAuthSessionPolicyIndex  
  TruthValue as etsysMultiAuthSessionIsApplied  

EtsysMultiAuthSessionPortEntry  
SEQUENCE    
  EtsysMultiAuthStatus as etsysMultiAuthSessionPortAuthStatus