ENTERASYS-RADIUS-ACCT-CLIENT-EXT-MIB

File: ENTERASYS-RADIUS-ACCT-CLIENT-EXT-MIB.mib (14509 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB ENTERASYS-MIB-NAMES

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP TruthValue RowStatus
InetAddressType InetAddress etsysModules

Defined Objects

etsysRadiusAcctClientMIB 1.3.6.1.4.1.5624.1.2.27
This MIB module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to the client side of the Remote Access Dialin User Service (RADIUS) Accounting protocol (RFC2866). This MIB provides read-write access to configuration objects not provided in the standard RADIUS Accounting Client MIB (RFC2620). However, the write capability must only be supported for SNMPv3, or other SNMP versions with adequately strong security. Security concerns include Object ID verification, source address verification and timeliness verification.
MODULE-IDENTITY    

etsysRadiusAcctClientMIBObjects 1.3.6.1.4.1.5624.1.2.27.1
OBJECT IDENTIFIER    

etsysRadiusAcctClientEnable 1.3.6.1.4.1.5624.1.2.27.1.1
This object indicates whether or not RADIUS Accounting is enabled or disabled. This parameter value is maintained across system reboots.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

etsysRadiusAcctClientUpdateInterval 1.3.6.1.4.1.5624.1.2.27.1.2
This indicates how many seconds elapse between accounting interim updates. This parameter value is maintained across system reboots. A value of zero means no Interim Updates. If the value is less than etsysRadiusAcctClientIntervalMinimum, the etsysRadiusAcctClientIntervalMinimum value will be used for the update interval time. If RADIUS Accounting is not enabled, this object is ignored. Note that Accounting Interim Updates are not issued by the RADIUS Accounting Client, unless so requested by the RADIUS Server in an Access Accept packet.
OBJECT-TYPE    
  INTEGER 0..2147483647  

etsysRadiusAcctClientIntervalMinimum 1.3.6.1.4.1.5624.1.2.27.1.3
This indicates the minimum value in seconds between accounting interim updates supported by the managed entity. This parameter value is maintained across system reboots. If RADIUS Accounting is not enabled, this object is ignored.
OBJECT-TYPE    
  INTEGER 60..2147483647  

etsysRadiusAcctClientServerTable 1.3.6.1.4.1.5624.1.2.27.1.4
The (conceptual) table listing the RADIUS Accounting servers.
OBJECT-TYPE    
  SEQUENCE OF  
    EtsysRadiusAcctClientServerEntry

etsysRadiusAcctClientServerEntry 1.3.6.1.4.1.5624.1.2.27.1.4.1
An entry (conceptual row) representing a RADIUS Accounting server with which the client shares a secret. If RADIUS Accounting is not enabled, this table is ignored. All created conceptual rows are non-volatile and as such must be maintained upon restart of the agent.
OBJECT-TYPE    
  EtsysRadiusAcctClientServerEntry  

etsysRadiusAcctClientServerIndex 1.3.6.1.4.1.5624.1.2.27.1.4.1.1
A number uniquely identifying each conceptual row in the etsysRadiusAcctClientServerTable. In the event of an agent restart, the same value of etsysRadiusAcctClientServerIndex must be used to identify each conceptual row in etsysRadiusAcctClientServerTable as was used prior to the restart.
OBJECT-TYPE    
  INTEGER 1..2147483647  

etsysRadiusAcctClientServerAddressType 1.3.6.1.4.1.5624.1.2.27.1.4.1.2
The type of Internet address by which the RADIUS Accounting server is reachable.
OBJECT-TYPE    
  InetAddressType  

etsysRadiusAcctClientServerAddress 1.3.6.1.4.1.5624.1.2.27.1.4.1.3
The Internet address for the RADIUS Accounting server. Note that implementations must limit themselves to a single entry in this table per reachable server. The etsysRadiusAcctClientServerAddress may not be empty due to the SIZE restriction. Also the size of a DNS name is limited to 64 characters. This parameter value is maintained across system reboots.
OBJECT-TYPE    
  InetAddress SIZE(1..64)  

etsysRadiusAcctClientServerPortNumber 1.3.6.1.4.1.5624.1.2.27.1.4.1.4
The UDP port number (1-65535) the client is using to send requests to this server. The officially assigned port number for RADIUS Accounting is 1813. This parameter value is maintained across system reboots.
OBJECT-TYPE    
  INTEGER 1..65535  

etsysRadiusAcctClientServerSecret 1.3.6.1.4.1.5624.1.2.27.1.4.1.5
This object is the secret shared between the RADIUS Accounting server and RADIUS client. This parameter value is maintained across system reboots. While the 'official' MAX-ACCESS for this object is read-create, all security-conscious implementations will 'lie' on a read, and return a null-string, or something else that is fairly innocuous. The ability to read back passwords and secret encryption keys is generally a Bad Thing (tm).
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

etsysRadiusAcctClientServerSecretEntered 1.3.6.1.4.1.5624.1.2.27.1.4.1.6
This indicates the existence of a shared secret.
OBJECT-TYPE    
  TruthValue  

etsysRadiusAcctClientServerRetryTimeout 1.3.6.1.4.1.5624.1.2.27.1.4.1.7
The number of seconds to wait for a RADIUS Accounting Server to respond to a request. This parameter value is maintained across system reboots.
OBJECT-TYPE    
  INTEGER 2..10  

etsysRadiusAcctClientServerRetries 1.3.6.1.4.1.5624.1.2.27.1.4.1.8
The number of times to resend an accounting packet if a RADIUS Accounting Server does not respond to a request. This parameter value is maintained across system reboots.
OBJECT-TYPE    
  INTEGER 0..20  

etsysRadiusAcctClientServerClearTime 1.3.6.1.4.1.5624.1.2.27.1.4.1.9
On a read, this value indicates the number of seconds since the counters, as defined in the IETF standard RADIUS Accounting Client MIB (RFC2618), were cleared. On a write, the client counters will be cleared and the clear time will be set to zero.
OBJECT-TYPE    
  INTEGER 1..2147483647  

etsysRadiusAcctClientServerStatus 1.3.6.1.4.1.5624.1.2.27.1.4.1.10
Lets users create and delete RADIUS Accounting server entries on systems that support this capability. Rules 1. When creating a RADIUS Accounting Client, it is up to the management station to determine a suitable etsysRadiusAcctClientServerIndex. To facilitate interoperability, agents should not put any restrictions on the etsysRadiusAcctClientServerIndex beyond the obvious ones that it be valid and unused. 2. Before a new row can become 'active', values must be supplied for the columnar objects etsysRadiusAcctClientClientServerAddress, etsysRadiusAcctClientServerPortNumber and etsysRadiusAcctClientServerSecret. 3. The value of etsysRadiusAcctClientServerStatus must be set to 'notInService' in order to modify a writable object in the same conceptual row. 4. etsysRadiusAcctClientServer entries whose status is 'notReady' or 'notInService' will not be used for Accounting.
OBJECT-TYPE    
  RowStatus  

etsysRadiusAcctClientMIBConformance 1.3.6.1.4.1.5624.1.2.27.2
OBJECT IDENTIFIER    

etsysRadiusAcctClientMIBCompliances 1.3.6.1.4.1.5624.1.2.27.2.1
OBJECT IDENTIFIER    

etsysRadiusClientMIBCompliance 1.3.6.1.4.1.5624.1.2.27.2.1.1
The compliance statement for Accounting clients implementing the RADIUS Accounting Client MIB.
MODULE-COMPLIANCE    

etsysRadiusAcctClientMIBGroups 1.3.6.1.4.1.5624.1.2.27.2.2
OBJECT IDENTIFIER    

etsysRadiusAcctClientMIBGroup 1.3.6.1.4.1.5624.1.2.27.2.2.1
The basic collection of objects providing a proprietary extension to the standard RADIUS Client MIB. This MIB provides read-write access to configuration objects not provided in the standard RADIUS Accounting Client MIB (RFC2618). However, the write capability must only be supported for SNMPv3, or other SNMP versions with adequately strong security.
OBJECT-GROUP    

Defined Objects

EtsysRadiusAcctClientServerEntry  
SEQUENCE    
  INTEGER as etsysRadiusAcctClientServerIndex  
  InetAddressType as etsysRadiusAcctClientServerAddressType  
  InetAddress as etsysRadiusAcctClientServerAddress  
  INTEGER as etsysRadiusAcctClientServerPortNumber  
  OCTET STRING as etsysRadiusAcctClientServerSecret  
  TruthValue as etsysRadiusAcctClientServerSecretEntered  
  INTEGER as etsysRadiusAcctClientServerRetryTimeout  
  INTEGER as etsysRadiusAcctClientServerRetries  
  INTEGER as etsysRadiusAcctClientServerClearTime  
  RowStatus as etsysRadiusAcctClientServerStatus