
| RFC-1215 | RFC1213-MIB | RFC1155-SMI |
| RFC-1212 |
| TRAP-TYPE | DisplayString | Gauge |
| enterprises | OBJECT-TYPE |
| essentialCommunications | 1.3.6.1.4.1.2159 | ||
| OBJECT IDENTIFIER | |||
| ecRoot | 1.3.6.1.4.1.2159.1 | ||
| OBJECT IDENTIFIER | |||
| ecProducts | 1.3.6.1.4.1.2159.1.3 | ||
| OBJECT IDENTIFIER | |||
| ess2000MIB | 1.3.6.1.4.1.2159.1.3.2 | ||
| OBJECT IDENTIFIER | |||
| switch | 1.3.6.1.4.1.2159.1.3.2.1 | ||
| OBJECT IDENTIFIER | |||
| switchDescription | 1.3.6.1.4.1.2159.1.3.2.1.1 | ||
| Returns the description, vendor, and version numbers of the switch. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| switchNumOfPorts | 1.3.6.1.4.1.2159.1.3.2.1.2 | ||
| The number of slots in this switch. (Max number of media access cards). | |||
| OBJECT-TYPE | |||
| Gauge | |||
| switchSensors | 1.3.6.1.4.1.2159.1.3.2.1.3 | ||
| This value returns the status of the temperature and power supply sensors. From least to most significant byte the values are power supply 1-3 with the most signficant byte being the over temperature sensor. 0 indicates the sensor is autodectable and not installed. 1 indicates the sensor is OK. 2 indicates the sensor is not OK. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..3) | ||
| switchControlCard | 1.3.6.1.4.1.2159.1.3.2.2 | ||
| OBJECT IDENTIFIER | |||
| sccDescription | 1.3.6.1.4.1.2159.1.3.2.2.1 | ||
| The model, vendor, and version number of the switch control card. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| sccDateTime | 1.3.6.1.4.1.2159.1.3.2.2.2 | ||
| The date/time in the real time clock. Format: yyyymmddhhmmss | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| sccAdminStatus | 1.3.6.1.4.1.2159.1.3.2.2.3 | ||
| The desired state of the switch. 1 indicates switch is up. 2 will make the switch reset. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| sccOperStatus | 1.3.6.1.4.1.2159.1.3.2.2.4 | ||
| The current state of the switch. 1 indicates the switch is up. 2 indicates the switch is resetting. SNMP operations can not occur when the switch is resetting. 3 indicates a busy switch. SNMP operations can not occur when the switch is busy. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mediaInterfaceCards | 1.3.6.1.4.1.2159.1.3.2.3 | ||
| OBJECT IDENTIFIER | |||
| backPlaneTable | 1.3.6.1.4.1.2159.1.3.2.3.1 | ||
| This table represent all of the slots in a HIPPI switch. None of the rows can be added to or deleted by the user. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BackPlaneEntry | |||
| backPlaneEntry | 1.3.6.1.4.1.2159.1.3.2.3.1.1 | ||
| A row in the table describing one slot in the switch backplane. | |||
| OBJECT-TYPE | |||
| BackPlaneEntry | |||
| backPlaneIndex | 1.3.6.1.4.1.2159.1.3.2.3.1.1.1 | ||
| The table index for this slot on the backplane. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| backPlaneNumber | 1.3.6.1.4.1.2159.1.3.2.3.1.1.2 | ||
| The slot number as seen printed on the switch (backPlaneIndex + 1) | |||
| OBJECT-TYPE | |||
| Gauge | |||
| backPlaneCard | 1.3.6.1.4.1.2159.1.3.2.3.1.1.3 | ||
| The type of MIC present in this slot of the backplane on the switch 0 No MIC 1 Unknown MIC 2 Parallel MIC 3 Serial MIC | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mICPowerUpInitError | 1.3.6.1.4.1.2159.1.3.2.3.1.1.4 | ||
| 1 if error detected by MIC on start-up, else 0. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICHippiParityBurstError | 1.3.6.1.4.1.2159.1.3.2.3.1.1.5 | ||
| Type of parity error. 0 None 1 XDeMux (Transmitting) 2 XMux (Receiving) | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mICLinkReady | 1.3.6.1.4.1.2159.1.3.2.3.1.1.6 | ||
| Valid the SMIC only. 1 if link ready asserted, else 0. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICSourceInterconnect | 1.3.6.1.4.1.2159.1.3.2.3.1.1.7 | ||
| Source interconnect is valid for the PMIC only. 1 if interconnect is true else 0 | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICSourceRequest | 1.3.6.1.4.1.2159.1.3.2.3.1.1.8 | ||
| 1 if source request is asserted else 0. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICSourceConnect | 1.3.6.1.4.1.2159.1.3.2.3.1.1.9 | ||
| 1 if source connect is asserted else 0. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICSourceLastConnectAttempt | 1.3.6.1.4.1.2159.1.3.2.3.1.1.10 | ||
| 0 if no last connect attempt. 1 if last source request was successful or no last connect. 2 Connection underway. 3 if last connect was rejected downstream. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mICDestinationInterconnect | 1.3.6.1.4.1.2159.1.3.2.3.1.1.11 | ||
| 1 if destination interconnect is asserted else 0. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICDestinationRequest | 1.3.6.1.4.1.2159.1.3.2.3.1.1.12 | ||
| 1 if destination request is asserted else 0. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICDestinationConnect | 1.3.6.1.4.1.2159.1.3.2.3.1.1.13 | ||
| 1 if destination connect is asserted else 0. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICByteCounterOverflow | 1.3.6.1.4.1.2159.1.3.2.3.1.1.14 | ||
| The number of times the byte counter has over-flowed. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICNumberOfBytes | 1.3.6.1.4.1.2159.1.3.2.3.1.1.15 | ||
| The number of bytes that have passed through the MIC. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICNumberOfPackets | 1.3.6.1.4.1.2159.1.3.2.3.1.1.16 | ||
| The number of times packets has been asserted. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| mICConnectsSuccessful | 1.3.6.1.4.1.2159.1.3.2.3.1.1.17 | ||
| The number of times this MIC has connected since reset. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| sourceRoutes | 1.3.6.1.4.1.2159.1.3.2.4 | ||
| OBJECT IDENTIFIER | |||
| srcRouteTable | 1.3.6.1.4.1.2159.1.3.2.4.1 | ||
| This table holds all of the source routes for this switch. FORMAT: OutputPort InputPortList Status. Output port is 0 to 31 Input port is 0 to 31 List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. Status is 0 (disabled) or 1 (enabled) | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SrcRouteEntry | |||
| srcRouteEntry | 1.3.6.1.4.1.2159.1.3.2.4.1.1 | ||
| One row in the source route table. | |||
| OBJECT-TYPE | |||
| SrcRouteEntry | |||
| srcIndex | 1.3.6.1.4.1.2159.1.3.2.4.1.1.1 | ||
| The row number for this row of the table. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| srcRouteInPortAccess | 1.3.6.1.4.1.2159.1.3.2.4.1.1.2 | ||
| FORMAT: Shows the input port access for 1 output port. Each instance is the output port number. Each 32 bit hex value displays the input port access for 32 ports. with port 32 on the left and port 0 on the right. Each bit is set for and enabled port, clear for a disabled one. For example 80000000 indicates input port 31 is enabled for this output port | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| srcRouteOutPortAccess | 1.3.6.1.4.1.2159.1.3.2.4.1.1.3 | ||
| FORMAT: Shows the output port access for 1 input port. Each instance is the input port number. Each 32 bit hex value displays the output port access for 32 ports. with port 32 on the left and port 0 on the right. Each bit is set for and enabled port, clear for a disabled one. For example 80000000 indicates output port 31 is enabled for this input port | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| srcRouteWrite | 1.3.6.1.4.1.2159.1.3.2.4.2 | ||
| Setting this variable alters source routes. FORMAT: OutputPortList InputPortList Status. Output port is 0 to 31 Input port is 0 to 31 Status is 0 (disabled) or 1 (enabled) List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| srcSaveRestore | 1.3.6.1.4.1.2159.1.3.2.4.3 | ||
| This will save or restore all of the source routes. Writting a 0 is a no operation. Writting a 1 saves all source routes on the switch. Writting a 2 restores all source routes on the switch. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| logicalAddressRoutes | 1.3.6.1.4.1.2159.1.3.2.5 | ||
| OBJECT IDENTIFIER | |||
| destRouteTable | 1.3.6.1.4.1.2159.1.3.2.5.1 | ||
| This table holds all of destination routes (logical address routes) for this switch. FORMAT: LogicalAddress InputPortList Huntgroup. LogicalAddress is 0 to 4095. Input port is 0 to 31 Huntgroup is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| DestRouteEntry | |||
| destRouteEntry | 1.3.6.1.4.1.2159.1.3.2.5.1.1 | ||
| A row in the destination route table. | |||
| OBJECT-TYPE | |||
| DestRouteEntry | |||
| destIndex | 1.3.6.1.4.1.2159.1.3.2.5.1.1.1 | ||
| The index for this row of the table. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| destRoute | 1.3.6.1.4.1.2159.1.3.2.5.1.1.2 | ||
| One Destination Route. FORMAT: LogicalAddress InputPortList Huntgroup. LogicalAddress is 0 to 4095. Input port is 0 to 31. Huntgroup is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| destRouteWrite | 1.3.6.1.4.1.2159.1.3.2.5.2 | ||
| Setting this variable will alter the desitination routes. FORMAT: LogicalAddressList Huntgroup InputPortList. LogicalAddress is 0 to 4095. Huntgroup is 0 to 31. 31 will disable this route. Input port is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| pathRouteTable | 1.3.6.1.4.1.2159.1.3.2.5.3 | ||
| This table holds all of pathway routes for this switch. FORMAT: PathwayAddressList InputPortList outputPort PathwaAddress is 0 to 4095. Input port is 0 to 31 outputPort is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| PathRouteEntry | |||
| pathRouteEntry | 1.3.6.1.4.1.2159.1.3.2.5.3.1 | ||
| A row in the pathway route table. | |||
| OBJECT-TYPE | |||
| PathRouteEntry | |||
| pathIndex | 1.3.6.1.4.1.2159.1.3.2.5.3.1.1 | ||
| The index for this row of the table. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| pathRoute | 1.3.6.1.4.1.2159.1.3.2.5.3.1.2 | ||
| One pathway logical address route. FORMAT: LogicalAddress InputPortList outputPort. LogicalAddress is 0 to 4095. Input port is 0 to 31. outputPort is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| pathRouteWrite | 1.3.6.1.4.1.2159.1.3.2.5.4 | ||
| Setting this variable will alter the pathway logical routes. FORMAT: LogicalAddressList Huntgroup InputPortList. LogicalAddress is 0 to 4095. Huntgroup is 0 to 31. 31 will disable this route. Input port is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| routesSaveRestore | 1.3.6.1.4.1.2159.1.3.2.5.5 | ||
| This saves and restores the route information. 0 is a no operation. 1 saves all destination routes on the switch. 2 restores all destination routes on the switch. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| routeDisable | 1.3.6.1.4.1.2159.1.3.2.5.6 | ||
| Setting this variable will disable logical address routes. FORMAT: LogicalAddressList InputPortList. LogicalAddress is 0 to 4095 (0x0 to 0xfff). Input port is 0 to 31 (0x0 to 0x1f). List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| huntGroups | 1.3.6.1.4.1.2159.1.3.2.6 | ||
| OBJECT IDENTIFIER | |||
| hGTable | 1.3.6.1.4.1.2159.1.3.2.6.1 | ||
| This table holds all of the huntgroups for this switch. FORMAT: Huntgroup ( OutportList ) Huntgroup is 0 to 31. OutportList is an orderd list of output ports in Huntgroup. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HGEntry | |||
| hGEntry | 1.3.6.1.4.1.2159.1.3.2.6.1.1 | ||
| A row in the huntgroup table. | |||
| OBJECT-TYPE | |||
| HGEntry | |||
| hg | 1.3.6.1.4.1.2159.1.3.2.6.1.1.1 | ||
| The huntgroup number. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| hgList | 1.3.6.1.4.1.2159.1.3.2.6.1.1.2 | ||
| The definition of one Huntgroup. FORMAT: Huntgroup ( OutportList ) Huntgroup is 0 to 31. OutportList is an orderd list of output ports in Huntgroup. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..80) | ||
| hgWrite | 1.3.6.1.4.1.2159.1.3.2.6.2 | ||
| Setting this variable will alter the huntgroup table by setting every huntgroup in list to include outPortList. FORMAT: HuntgroupList OutportList Huntgroup is 0 to 31. Outport is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| hgSaveRestore | 1.3.6.1.4.1.2159.1.3.2.6.3 | ||
| This saves and restores the hunt groups. 0 is a no operation. 1 saves all hunt group information on the switch. 2 restores all hunt group information on the switch. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| switchEvents | 1.3.6.1.4.1.2159.1.3.2.7 | ||
| OBJECT IDENTIFIER | |||
| switchSensorWarning | 1.3.6.1.4.1.2159.1.3.2.7.1 | ||
| This warns that switch sensor(s) are changing status. One 32 bit hex values is returned and is ASCII encoded as follows: abcd where each character is a byte (8 bit value). a is the over temperature sensor. b, c, and d are power sensors 3 to 1 respectively. Each byte contains the following information: 0 (30 hex) Sensor is autodetectable, but it is not installed. 1 (32 hex) Sensor (if installed) has no problem 2 (33 hex) Sensor (if installed) has a sensor warning. 3-15 not defined. For example, the hex values 0021 means over temperature sensor is not installed, power supply sensor 3 is not installed, power supply sensor 2 has indicated power supply failure, and power supply 1 is ok. | |||
| TRAP-TYPE | |||
| switchSensors | |||
| ecExperimental | 1.3.6.1.4.1.2159.1.6 | ||
| OBJECT IDENTIFIER | |||
| BackPlaneEntry | |||
| SEQUENCE | |||
| Gauge as backPlaneIndex | |||
| Gauge as backPlaneNumber | |||
| INTEGER as backPlaneCard | |||
| Gauge as mICPowerUpInitError | |||
| INTEGER as mICHippiParityBurstError | |||
| Gauge as mICLinkReady | |||
| Gauge as mICSourceInterconnect | |||
| Gauge as mICSourceRequest | |||
| Gauge as mICSourceConnect | |||
| INTEGER as mICSourceLastConnectAttempt | |||
| Gauge as mICDestinationInterconnect | |||
| Gauge as mICDestinationRequest | |||
| Gauge as mICDestinationConnect | |||
| Gauge as mICByteCounterOverflow | |||
| Gauge as mICNumberOfBytes | |||
| Gauge as mICNumberOfPackets | |||
| Gauge as mICConnectsSuccessful | |||
| SrcRouteEntry | |||
| SEQUENCE | |||
| Gauge as srcIndex | |||
| DisplayString as srcRouteInPortAccess | |||
| DisplayString as srcRouteOutPortAccess | |||
| DestRouteEntry | |||
| SEQUENCE | |||
| Gauge as destIndex | |||
| DisplayString as destRoute | |||
| PathRouteEntry | |||
| SEQUENCE | |||
| Gauge as pathIndex | |||
| DisplayString as pathRoute | |||
| HGEntry | |||
| SEQUENCE | |||
| Gauge as hg | |||
| DisplayString as hgList | |||