EXTREME-SYSTEM-MIB

File: EXTREME-SYSTEM-MIB.mib (34388 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
EXTREME-BASE-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
TruthValue DisplayString extremeAgent
PortList IpAddress

Defined Objects

extremeSystem 1.3.6.1.4.1.1916.1.1
Extreme System objects: objects common to all platforms
MODULE-IDENTITY    

extremeSystemCommon 1.3.6.1.4.1.1916.1.1.1
OBJECT IDENTIFIER    

extremeSaveConfiguration 1.3.6.1.4.1.1916.1.1.1.3
When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the extremeSaveStatus object to determine when the asynchronous save operation has completed.
OBJECT-TYPE    
  INTEGER saveToPrimary(1), saveToSecondary(2)  

extremeSaveStatus 1.3.6.1.4.1.1916.1.1.1.4
This object will return the status of a save operation invoked by setting the extremeSaveConfiguration object. A network management application can read this object to determine that a save operation has completed.
OBJECT-TYPE    
  INTEGER saveInProgress(1), saveNotInProgress(2)  

extremeCurrentConfigInUse 1.3.6.1.4.1.1916.1.1.1.5
Shows which NVRAM configuration store was used at last boot
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

extremeConfigToUseOnReboot 1.3.6.1.4.1.1916.1.1.1.6
Controls which NVRAM configuration store will be used on next reboot.
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

extremeOverTemperatureAlarm 1.3.6.1.4.1.1916.1.1.1.7
Alarm status of overtemperature sensor in device enclosure.
OBJECT-TYPE    
  TruthValue  

extremeCurrentTemperature 1.3.6.1.4.1.1916.1.1.1.8
Current temperature in degrees celcius measured inside device enclosure.
OBJECT-TYPE    
  INTEGER 0..100  

extremeFanStatusTable 1.3.6.1.4.1.1916.1.1.1.9
Table of operational status of all internal cooling fans.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeFanStatusEntry

extremeFanStatusEntry 1.3.6.1.4.1.1916.1.1.1.9.1
Entry in table of all internal cooling fans.
OBJECT-TYPE    
  ExtremeFanStatusEntry  

extremeFanNumber 1.3.6.1.4.1.1916.1.1.1.9.1.1
Identifier of cooling fan, numbered from the front and/or left side of device.
OBJECT-TYPE    
  INTEGER  

extremeFanOperational 1.3.6.1.4.1.1916.1.1.1.9.1.2
Operational status of a cooling fan.
OBJECT-TYPE    
  TruthValue  

extremeFanEntPhysicalIndex 1.3.6.1.4.1.1916.1.1.1.9.1.3
The entity index for this fan entity in the entity table.
OBJECT-TYPE    
  INTEGER  

extremePrimaryPowerOperational 1.3.6.1.4.1.1916.1.1.1.10
Operational status of internal power supply of a device.
OBJECT-TYPE    
  TruthValue  

extremeRedundantPowerStatus 1.3.6.1.4.1.1916.1.1.1.11
Operational status of an external redundant power supply to a device.
OBJECT-TYPE    
  INTEGER notPresent(1), presentOK(2), presentNotOK(3)  

extremeRedundantPowerAlarm 1.3.6.1.4.1.1916.1.1.1.12
Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
OBJECT-TYPE    
  TruthValue  

extremePrimarySoftwareRev 1.3.6.1.4.1.1916.1.1.1.13
The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

extremeSecondarySoftwareRev 1.3.6.1.4.1.1916.1.1.1.14
The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

extremeImageToUseOnReboot 1.3.6.1.4.1.1916.1.1.1.15
Controls which image will be used on next reboot.
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

extremeSystemID 1.3.6.1.4.1.1916.1.1.1.16
This represents the System ID of the Summit Switch.
OBJECT-TYPE    
  DisplayString SIZE(0..126)  

extremeSystemBoardID 1.3.6.1.4.1.1916.1.1.1.17
This represents the Board ID of the Summit Switch.
OBJECT-TYPE    
  DisplayString SIZE(0..126)  

extremeSystemLeftBoardID 1.3.6.1.4.1.1916.1.1.1.18
This represents the Left Board ID of the Summit Switch.
OBJECT-TYPE    
  DisplayString SIZE(0..126)  

extremeSystemRightBoardID 1.3.6.1.4.1.1916.1.1.1.19
This represents the Right Board ID of the Summit Switch.
OBJECT-TYPE    
  DisplayString SIZE(0..126)  

extremeInputPowerVoltage 1.3.6.1.4.1.1916.1.1.1.20
The input power voltage at which the system is currently operating.
OBJECT-TYPE    
  INTEGER v110(1), v220(2), v48DC(3)  

extremePowerStatus 1.3.6.1.4.1.1916.1.1.1.21
Operational status of the power supply to a device.
OBJECT-TYPE    
  INTEGER notPresent(1), presentOK(2), presentNotOK(3)  

extremePowerAlarm 1.3.6.1.4.1.1916.1.1.1.22
Alarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
OBJECT-TYPE    
  TruthValue  

extremeRmonEnable 1.3.6.1.4.1.1916.1.1.1.23
Setting this to true will cause the agent to start collecting RMON statistics.
OBJECT-TYPE    
  TruthValue  

extremeBootROMVersion 1.3.6.1.4.1.1916.1.1.1.25
The software revision of the bootrom on the device. This string will have a zero length if the revision is unknown or invalid.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

extremeDot1dTpFdbTableEnable 1.3.6.1.4.1.1916.1.1.1.26
Setting this to true will cause GetNext operations on the dot1dTpFdbTable to be allowed. Note that Get operations are always allowed.
OBJECT-TYPE    
  TruthValue  

extremePowerSupplyTable 1.3.6.1.4.1.1916.1.1.1.27
Table of status of all power supplies in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremePowerSupplyEntry

extremePowerSupplyEntry 1.3.6.1.4.1.1916.1.1.1.27.1
An entry indicating the status of a specific power supply.
OBJECT-TYPE    
  ExtremePowerSupplyEntry  

extremePowerSupplyNumber 1.3.6.1.4.1.1916.1.1.1.27.1.1
Power supply number.
OBJECT-TYPE    
  INTEGER  

extremePowerSupplyStatus 1.3.6.1.4.1.1916.1.1.1.27.1.2
Status of the power supply.
OBJECT-TYPE    
  INTEGER notPresent(1), presentOK(2), presentNotOK(3)  

extremePowerSupplyInputVoltage 1.3.6.1.4.1.1916.1.1.1.27.1.3
Input voltage of the power supply
OBJECT-TYPE    
  INTEGER v110(1), v220(2), v48DC(3), unknown(4)  

extremePowerSupplySerialNumber 1.3.6.1.4.1.1916.1.1.1.27.1.4
The serial number of the power supply unit.
OBJECT-TYPE    
  DisplayString SIZE(0..126)  

extremePowerSupplyEntPhysicalIndex 1.3.6.1.4.1.1916.1.1.1.27.1.5
The entity index for this psu entity in the entity table.
OBJECT-TYPE    
  INTEGER  

extremeCpuAggregateUtilization 1.3.6.1.4.1.1916.1.1.1.28
The aggregate CPU utilization since the time the start started executing.
OBJECT-TYPE    
  INTEGER  

extremeCpuTask2Table 1.3.6.1.4.1.1916.1.1.1.29
Table of CPU tasks that are active.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeCpuTask2Entry

extremeCpuTask2Entry 1.3.6.1.4.1.1916.1.1.1.29.1
An entry in table of describes a single task.
OBJECT-TYPE    
  ExtremeCpuTask2Entry  

extremeCpuTask2CpuId 1.3.6.1.4.1.1916.1.1.1.29.1.1
CPU on which this task last executed or is executing. The primary CPU has a value of 1.
OBJECT-TYPE    
  Unsigned32  

extremeCpuTask2Name 1.3.6.1.4.1.1916.1.1.1.29.1.2
Name associated with the reported task id.
OBJECT-TYPE    
  DisplayString SIZE(0..31)  

extremeCpuTask2Id 1.3.6.1.4.1.1916.1.1.1.29.1.3
Task identifier assigned by the operating system when this task is spawned.
OBJECT-TYPE    
  Unsigned32  

extremeCpuTask2Pc 1.3.6.1.4.1.1916.1.1.1.29.1.4
The value of the program counter for this task. It indicates the address of the next instruction that would be executed once the operating system resumes this task.
OBJECT-TYPE    
  Unsigned32  

extremeCpuTask2Status 1.3.6.1.4.1.1916.1.1.1.29.1.5
The current status of the task as reported by the operating system.
OBJECT-TYPE    
  DisplayString  

extremeCpuTask2Utilization 1.3.6.1.4.1.1916.1.1.1.29.1.6
The current CPU utilization by this task. This is the utilization when the task last executed.
OBJECT-TYPE    
  Unsigned32  

extremeCpuTask2MaxUtilization 1.3.6.1.4.1.1916.1.1.1.29.1.7
The maximum CPU utilization by this task since the time the start started executing. This value may be cleared.
OBJECT-TYPE    
  Unsigned32  

extremeAuthFailSrcAddr 1.3.6.1.4.1.1916.1.1.1.30
The IP address of the originator of the bad SNMP request that caused the generation of an authentication failure trap.
OBJECT-TYPE    
  IpAddress  

extremeCpuTransmitPriority 1.3.6.1.4.1.1916.1.1.1.31
The CPU transmit priority.
OBJECT-TYPE    
  INTEGER normal(1), high(2)  

extremeImageBooted 1.3.6.1.4.1.1916.1.1.1.32
The image with which the switch was last booted, using which it is currently running.
OBJECT-TYPE    
  INTEGER primary(1), secondary(2)  

extremeMsmFailoverCause 1.3.6.1.4.1.1916.1.1.1.33
The cause of the last MSM failover. never(1) means an MSM Failover has not occurred since the last reboot. admin(2) means the failover was initiated by the user. exception(3) means the former master MSM encountered a software exception condition. removal(4) means the master MSM was physically removed from the chassis. hwFailure(5) means a diagnostic failure was detected in the master MSM. watchdog(6) means that the master MSM hardware watchdog timer expired. keepalive(7) means the master MSM failed to respond to slave keepalive requests. The MSM failover will have been hitless only in the admin(2) and exception(3) cases
OBJECT-TYPE    
  INTEGER never(1), admin(2), exception(3), removal(4), hwFailure(5), watchdog(6), keepalive(7)  

extremeImageTable 1.3.6.1.4.1.1916.1.1.1.34
A table containing information about each software image.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeImageEntry

extremeImageEntry 1.3.6.1.4.1.1916.1.1.1.34.1
A table entry containing information about each software image.
OBJECT-TYPE    
  ExtremeImageEntry  

extremeImageNumber 1.3.6.1.4.1.1916.1.1.1.34.1.1
A unique integer identifying the particular software image.
OBJECT-TYPE    
  INTEGER cur(0), pri(1), sec(2)  

extremeMajorVersion 1.3.6.1.4.1.1916.1.1.1.34.1.2
The ExtremeWare Release Major Version.
OBJECT-TYPE    
  INTEGER  

extremeSubMajorVersion 1.3.6.1.4.1.1916.1.1.1.34.1.3
The ExtremeWare Release Sub-major Version. This object is deprecated from extremeware 7.3. The extremeMinorVersion gets the value of extremeSubMajorVersion and the new extremePatchVersion gets the value of old extremeMinorVersion value.
OBJECT-TYPE    
  INTEGER  

extremeMinorVersion 1.3.6.1.4.1.1916.1.1.1.34.1.4
The ExtremeWare Release Minor Version.
OBJECT-TYPE    
  INTEGER  

extremeBuildNumber 1.3.6.1.4.1.1916.1.1.1.34.1.5
The ExtremeWare Build Number.
OBJECT-TYPE    
  INTEGER  

extremeTechnologyReleaseNumber 1.3.6.1.4.1.1916.1.1.1.34.1.6
The Technology Release version. This value is zero for all but TR releases.
OBJECT-TYPE    
  INTEGER  

extremeSustainingReleaseNumber 1.3.6.1.4.1.1916.1.1.1.34.1.7
The Sustaining Release number for the ExtremeWare version.
OBJECT-TYPE    
  INTEGER  

extremeBranchRevisionNumber 1.3.6.1.4.1.1916.1.1.1.34.1.8
The incremental build on specified branch.
OBJECT-TYPE    
  INTEGER  

extremeImageType 1.3.6.1.4.1.1916.1.1.1.34.1.9
The branch type from which the image was built.
OBJECT-TYPE    
  INTEGER trunk(0), branch(1), patch(2), technology(3), beta(4)  

extremeImageDescription 1.3.6.1.4.1.1916.1.1.1.34.1.10
A unique string that can be used to identify the specific patch, technology, or development branch release.
OBJECT-TYPE    
  DisplayString SIZE(0..13)  

extremeImageSecurity 1.3.6.1.4.1.1916.1.1.1.34.1.11
Indicates whether image was built with ssh.This object is deprecated, the ssh capability can be obtained from the extremeImageSshCapability of the ImageFeatureTable
OBJECT-TYPE    
  INTEGER unknown(0), nossh(1), ssh(2)  

extremePatchVersion 1.3.6.1.4.1.1916.1.1.1.34.1.12
The ExtremeWare Release Patch Version.
OBJECT-TYPE    
  INTEGER  

extremeImageFeatureTable 1.3.6.1.4.1.1916.1.1.1.35
A table containing information about the software features.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeImageFeatureEntry

extremeImageFeatureEntry 1.3.6.1.4.1.1916.1.1.1.35.1
A table entry containing information about software features.
OBJECT-TYPE    
  ExtremeImageFeatureEntry  

extremeImageFeatureNumber 1.3.6.1.4.1.1916.1.1.1.35.1.1
A unique integer identifying the particular software image.
OBJECT-TYPE    
  INTEGER cur(0), pri(1), sec(2)  

extremeImageSshCapability 1.3.6.1.4.1.1916.1.1.1.35.1.2
Indicates whether image has ssh capability.
OBJECT-TYPE    
  INTEGER unknown(0), nossh(1), ssh(2)  

extremeImageUAACapability 1.3.6.1.4.1.1916.1.1.1.35.1.3
Indicates whether image has Wireless(UAA) components.
OBJECT-TYPE    
  INTEGER unknown(0), nouaa(1), uaa(2)  

extremeChassisGroup 1.3.6.1.4.1.1916.1.1.2
OBJECT IDENTIFIER    

extremeMasterMSMSlot 1.3.6.1.4.1.1916.1.1.2.1
The extremeSlotNumber of the master MSM module.
OBJECT-TYPE    
  INTEGER  

extremeSlotTable 1.3.6.1.4.1.1916.1.1.2.2
A table containing information about each slot in the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    ExtremeSlotEntry

extremeSlotEntry 1.3.6.1.4.1.1916.1.1.2.2.1
A table entry containing information about the module in each slot of the chassis.
OBJECT-TYPE    
  ExtremeSlotEntry  

extremeSlotNumber 1.3.6.1.4.1.1916.1.1.2.2.1.1
A unique integer identifying the particular slot in the chassis.
OBJECT-TYPE    
  INTEGER  

extremeSlotName 1.3.6.1.4.1.1916.1.1.2.2.1.2
A name identifying the particular slot in the chassis.
OBJECT-TYPE    
  DisplayString  

extremeSlotModuleConfiguredType 1.3.6.1.4.1.1916.1.1.2.2.1.3
The configured module type for the given slot. At startup, the module-type is none(1). It is possible to configure the module-type even if there is no module in the slot. If the current module in the slot is different than the requested configured module-type, then the current configuration for the module is erased and the card will be restarted. The new configured module-type will be recorded. Since the configured module type is different than the actual module type, a moduleMismatch trap will be sent, and the extremeSlotModuleState for that module will show a mismatch(3). Setting this variable to none(1) will clear the previously assigned module-type of this slot, and all configuration information related to the slot will be erased.
OBJECT-TYPE    
  INTEGER none(1), fe32(2), g4x(3), g6x(4), fe32fx(5), f48ti(7), g8xi(8), g8ti(9), g12sxi(10), g12ti(11), fm32t(21), gm4x(22), gm4sx(23), gm4t(24), wdm8(25), fm24f(26), fm24sf(27), fm24te(28), f96ti(29), wdm4(30), f32fi(31), tenGx3(32), tenGigLR(33), g16x3(34), g24t3(35), gm16x3(36), gm16t3(37), fm16t3(38), fm32p(39), fm8v(50), wm4t1(51), wm4t3(52), wm1t3(53), wm4e1(54), p3c(101), p12c(102), arm(103), mpls(104), sma(105), p48c(106), a3c(107), a12c(108), pxm(200), s300fixed(201)  

extremeSlotModuleInsertedType 1.3.6.1.4.1.1916.1.1.2.2.1.4
The module type inserted into the slot. It is possible to have a slot inserted into the slot even though extremeSlotConfiguredType is none(1).
OBJECT-TYPE    
  INTEGER none(1), fe32(2), g4x(3), g6x(4), fe32fx(5), msm(6), f48ti(7), g8xi(8), g8ti(9), g12sxi(10), g12ti(11), msm64i(18), alpine3808(19), alpine3804(20), fm32t(21), gm4x(22), gm4sx(23), gm4t(24), wdm8(25), fm24f(26), fm24sf(27), fm24te(28), f96ti(29), wdm4(30), f32fi(31), tenGx3(32), tenGigLR(33), g16x3(34), g24t3(35), gm16x3(36), gm16t3(37), fm16t3(38), fm32p(39), fm8v(50), wm4t1(51), wm4t3(52), wm1t3(53), wm4e1(54), alpine3802(55), p3c(101), p12c(102), arm(103), mpls(104), sma(105), p48c(106), a3c(107), a12c(108), pxm(200), s300fixed(201), msm3(202)  

extremeSlotModuleState 1.3.6.1.4.1.1916.1.1.2.2.1.5
The state of the module inserted in this slot.
OBJECT-TYPE    
  INTEGER notPresent(1), testing(2), mismatch(3), failed(4), operational(5), powerdown(6), unknown(7), present(8), poweron(9), post(10), downloading(11), booting(12), offline(13), initializing(14), invalid(100)  

extremeSlotModuleSerialNumber 1.3.6.1.4.1.1916.1.1.2.2.1.6
The serial number of the module inserted in this slot.
OBJECT-TYPE    
  DisplayString  

extremeChassisPortsPerSlot 1.3.6.1.4.1.1916.1.1.2.3
The maximum number of ports that can be accomodated in a single slot. This number would change to accomodate blades with higher port density than current ones.
OBJECT-TYPE    
  INTEGER  

extremeSystemHealthCheck 1.3.6.1.4.1.1916.1.1.3
OBJECT IDENTIFIER    

extremeHealthCheckErrorType 1.3.6.1.4.1.1916.1.1.3.1
The error reported in the system health check trap
OBJECT-TYPE    
  INTEGER unknown(1), cpuPacket(2), backplane(3), hardwareFail(4), pbusChecksum(5)  

extremeHealthCheckAction 1.3.6.1.4.1.1916.1.1.3.2
The action/alarm level that has been configured for health check.
OBJECT-TYPE    
  INTEGER syslogOnly(1), healthCheckTrap(2), ioModuleDown(3), systemDown(4), autoRecovery(5)  

extremeHealthCheckMaxRetries 1.3.6.1.4.1.1916.1.1.3.3
The maximum number of times a module restart will be attempted if it fails. If extremeHealthCheckAction is not autorecovery(5), then this value is zero.
OBJECT-TYPE    
  INTEGER  

extremeSystemThresholds 1.3.6.1.4.1.1916.1.1.4
OBJECT IDENTIFIER    

extremeCpuUtilRisingThreshold 1.3.6.1.4.1.1916.1.1.4.1
Rising threshold for CPU Aggregation utilization trap
OBJECT-TYPE    
  INTEGER 0..100  

extremeCpuTaskUtilPair 1.3.6.1.4.1.1916.1.1.4.2
TaskName/CPU_% Util pair reported in CPU Utilization trap
OBJECT-TYPE    
  DisplayString  

Defined Objects

ExtremeFanStatusEntry  
SEQUENCE    
  INTEGER as extremeFanNumber  
  TruthValue as extremeFanOperational  
  INTEGER as extremeFanEntPhysicalIndex  

ExtremePowerSupplyEntry  
SEQUENCE    
  INTEGER as extremePowerSupplyNumber  
  INTEGER as extremePowerSupplyStatus  
  INTEGER as extremePowerSupplyInputVoltage  
  DisplayString as extremePowerSupplySerialNumber  
  INTEGER as extremePowerSupplyEntPhysicalIndex  

ExtremeCpuTask2Entry  
SEQUENCE    
  Unsigned32 as extremeCpuTask2CpuId  
  DisplayString as extremeCpuTask2Name  
  Unsigned32 as extremeCpuTask2Id  
  Unsigned32 as extremeCpuTask2Pc  
  DisplayString as extremeCpuTask2Status  
  Unsigned32 as extremeCpuTask2Utilization  
  Unsigned32 as extremeCpuTask2MaxUtilization  

ExtremeImageEntry  
SEQUENCE    
  INTEGER as extremeImageNumber  
  INTEGER as extremeMajorVersion  
  INTEGER as extremeSubMajorVersion  
  INTEGER as extremeMinorVersion  
  INTEGER as extremeBuildNumber  
  INTEGER as extremeTechnologyReleaseNumber  
  INTEGER as extremeSustainingReleaseNumber  
  INTEGER as extremeBranchRevisionNumber  
  INTEGER as extremeImageType  
  DisplayString as extremeImageDescription  
  INTEGER as extremeImageSecurity  
  INTEGER as extremePatchVersion  

ExtremeImageFeatureEntry  
SEQUENCE    
  INTEGER as extremeImageFeatureNumber  
  INTEGER as extremeImageSshCapability  
  INTEGER as extremeImageUAACapability  

ExtremeSlotEntry  
SEQUENCE    
  INTEGER as extremeSlotNumber  
  DisplayString as extremeSlotName  
  INTEGER as extremeSlotModuleConfiguredType  
  INTEGER as extremeSlotModuleInsertedType  
  INTEGER as extremeSlotModuleState  
  DisplayString as extremeSlotModuleSerialNumber