FIBRE-CHANNEL-FE-MIB

File: FIBRE-CHANNEL-FE-MIB.mib (61085 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
SNMPv2-CONF

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter32 Gauge32 Integer32
mib-2 TEXTUAL-CONVENTION TruthValue
TimeStamp SnmpAdminString MODULE-COMPLIANCE
OBJECT-GROUP

Defined Objects

fcFeMIB 1.3.6.1.2.1.75
The MIB module for Fibre Channel Fabric Element.
MODULE-IDENTITY    

fcFeMIBObjects 1.3.6.1.2.1.75.1
OBJECT IDENTIFIER    

fcFeConfig 1.3.6.1.2.1.75.1.1
OBJECT IDENTIFIER    

fcFeFabricName 1.3.6.1.2.1.75.1.1.1
The Name_Identifier of the Fabric to which this Fabric Element belongs.
OBJECT-TYPE    
  FcNameId  

fcFeElementName 1.3.6.1.2.1.75.1.1.2
The Name_Identifier of the Fabric Element.
OBJECT-TYPE    
  FcNameId  

fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3
The maximum number of modules in the Fabric Element, regardless of their current state.
OBJECT-TYPE    
  FcFeModuleCapacity  

fcFeModuleTable 1.3.6.1.2.1.75.1.1.4
A table that contains, one entry for each module in the Fabric Element, information of the modules.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFeModuleEntry

fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1
An entry containing the configuration parameters of a module.
OBJECT-TYPE    
  FcFeModuleEntry  

fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1
This object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity.
OBJECT-TYPE    
  FcFeModuleIndex  

fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2
A textual description of the module. This value should include the full name and version identification of the module.
OBJECT-TYPE    
  SnmpAdminString  

fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3
The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16 PlugInCard.'
OBJECT-TYPE    
  OBJECT IDENTIFIER  

fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4
This object indicates the operational status of the module: online(1) the module is functioning properly; offline(2) the module is not available; testing(3) the module is under testing; and faulty(4) the module is defective in some way.
OBJECT-TYPE    
  INTEGER online(1), offline(2), testing(3), faulty(4)  

fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5
This object contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of the module has not changed since the agent last restarted.
OBJECT-TYPE    
  TimeStamp  

fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6
The number of FxPort that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity inclusive. However, the numbers are not required to be contiguous.
OBJECT-TYPE    
  FcFeFxPortCapacity  

fcFeModuleName 1.3.6.1.2.1.75.1.1.4.1.7
The Name_Identifier of the module.
OBJECT-TYPE    
  FcNameId  

fcFxPortTable 1.3.6.1.2.1.75.1.1.5
A table that contains, one entry for each FxPort in the Fabric Element, configuration and service parameters of the FxPorts.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxPortEntry

fcFxPortEntry 1.3.6.1.2.1.75.1.1.5.1
An entry containing the configuration and service parameters of a FxPort.
OBJECT-TYPE    
  FcFxPortEntry  

fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1
This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized.
OBJECT-TYPE    
  FcFeFxPortIndex  

fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2
The World_wide Name of this FxPort. Each FxPort has a unique Port World_wide Name within the Fabric.
OBJECT-TYPE    
  FcNameId  

fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3
The highest or most recent version of FC-PH that the FxPort is configured to support.
OBJECT-TYPE    
  FcphVersion  

fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4
The lowest or earliest version of FC-PH that the FxPort is configured to support.
OBJECT-TYPE    
  FcphVersion  

fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5
The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the attached NxPort (if applicable) to FxPort.
OBJECT-TYPE    
  FcBbCredit  

fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6
The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort.
OBJECT-TYPE    
  FcRxDataFieldSize  

fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7
The Resource_Allocation_Timeout Value configured for the FxPort. This is used as the timeout value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents E_D_TOV (see next object) plus twice the maximum time that a frame may be delayed within the Fabric and still be delivered.
OBJECT-TYPE    
  MilliSeconds  

fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8
The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition.
OBJECT-TYPE    
  MilliSeconds  

fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9
A value indicating the set of Classes of Service supported by the FxPort.
OBJECT-TYPE    
  FcCosCap  

fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10
A flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection.
OBJECT-TYPE    
  TruthValue  

fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11
A value indicating the mode of Stacked Connect supported by the FxPort.
OBJECT-TYPE    
  FcStackedConnMode  

fcFxPortClass2SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.12
A flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort.
OBJECT-TYPE    
  TruthValue  

fcFxPortClass3SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.13
A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort.
OBJECT-TYPE    
  TruthValue  

fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14
The maximum time (in microseconds) that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the FxPort does not support this parameter.
OBJECT-TYPE    
  MicroSeconds  

fcFeStatus 1.3.6.1.2.1.75.1.2
OBJECT IDENTIFIER    

fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1
A table that contains, one entry for each FxPort in the Fabric Element, operational status and parameters of the FxPorts.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxPortStatusEntry

fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1
An entry containing operational status and parameters of a FxPort.
OBJECT-TYPE    
  FcFxPortStatusEntry  

fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1
The address identifier by which this FxPort is identified within the Fabric. The FxPort may assign its address identifier to its attached NxPort(s) during Fabric Login.
OBJECT-TYPE    
  FcAddressId  

fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2
The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit.
OBJECT-TYPE    
  Gauge32  

fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3
The current operational mode of the FxPort.
OBJECT-TYPE    
  INTEGER unknown(1), fPort(2), flPort(3)  

fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4
The desired operational mode of the FxPort.
OBJECT-TYPE    
  INTEGER fPort(2), flPort(3)  

fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2
A table that contains, one entry for each FxPort in the Fabric Element, physical level status and parameters of the FxPorts.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxPortPhysEntry

fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1
An entry containing physical level status and parameters of a FxPort.
OBJECT-TYPE    
  FcFxPortPhysEntry  

fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1
The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per configuration information accessible by the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state.
OBJECT-TYPE    
  INTEGER online(1), offline(2), testing(3)  

fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2
The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then fcFxPortPhysOperStatus should be offline(2). If fcFxPortPhysAdminStatus is changed to online(1) then fcFxPortPhysOperStatus should change to online(1) if the FxPort is ready to accept Fabric Login request from the attached NxPort; it should proceed and remain in the link- failure(4) state if and only if there is a fault that prevents it from going to the online(1) state.
OBJECT-TYPE    
  INTEGER online(1), offline(2), testing(3), linkFailure(4)  

fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3
The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not changed since the agent last restarted.
OBJECT-TYPE    
  TimeStamp  

fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4
The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization.
OBJECT-TYPE    
  MilliSeconds  

fcFxLoginTable 1.3.6.1.2.1.75.1.2.3
A table that contains, one entry for each NxPort attached to a particular FxPort in the Fabric Element, services parameters established from the most recent Fabric Login, explicit or implicit. Note that an FxPort may have one or more NxPort attached to it.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxLoginEntry

fcFxLoginEntry 1.3.6.1.2.1.75.1.2.3.1
An entry containing service parameters established from a successful Fabric Login.
OBJECT-TYPE    
  FcFxLoginEntry  

fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1
The object identifies the associated NxPort in the attachment for which the entry contains information.
OBJECT-TYPE    
  FcFeNxPortIndex  

fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2
The version of FC-PH that the FxPort has agreed to support from the Fabric Login
OBJECT-TYPE    
  FcphVersion  

fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3
The total number of buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames to be transmitted to the attached NxPort. It is for buffer-to- buffer flow control in the direction from FxPort to NxPort. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel.
OBJECT-TYPE    
  FcBbCredit  

fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4
The Receive Data Field Size of the attached NxPort. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the NxPort.
OBJECT-TYPE    
  FcRxDataFieldSize  

fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.5
A variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request.
OBJECT-TYPE    
  FcCosCap  

fcFxPortIntermixSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.6
A variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request. This flag is only valid if Class 1 service is supported.
OBJECT-TYPE    
  TruthValue  

fcFxPortStackedConnModeAgreed 1.3.6.1.2.1.75.1.2.3.1.7
A variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if Class 1 service has been agreed.
OBJECT-TYPE    
  FcStackedConnMode  

fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8
A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service has been agreed.
OBJECT-TYPE    
  TruthValue  

fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9
A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has been agreed.
OBJECT-TYPE    
  TruthValue  

fcFxPortNxPortName 1.3.6.1.2.1.75.1.2.3.1.10
The port name of the attached NxPort.
OBJECT-TYPE    
  FcNameId  

fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11
The address identifier of the destination NxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If this FxPort is not engaged in a connection, then the value of this object is '000000'H.
OBJECT-TYPE    
  FcAddressId  

fcFxPortBbCreditModel 1.3.6.1.2.1.75.1.2.3.1.12
This object identifies the BB_Credit model used by the FxPort.
OBJECT-TYPE    
  FcBbCreditModel  

fcFeError 1.3.6.1.2.1.75.1.3
OBJECT IDENTIFIER    

fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1
A table that contains, one entry for each FxPort, counters that record the numbers of errors detected.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxPortErrorEntry

fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1
An entry containing error counters of a FxPort.
OBJECT-TYPE    
  FcFxPortErrorEntry  

fcFxPortLinkFailures 1.3.6.1.2.1.75.1.3.1.1.1
The number of link failures detected by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortSyncLosses 1.3.6.1.2.1.75.1.3.1.1.2
The number of loss of synchronization detected by the FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3
The number of loss of signal detected by the FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4
The number of primitive sequence protocol errors detected by the FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortInvalidTxWords 1.3.6.1.2.1.75.1.3.1.1.5
The number of invalid transmission word detected by the FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortInvalidCrcs 1.3.6.1.2.1.75.1.3.1.1.6
The number of invalid CRC detected by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortDelimiterErrors 1.3.6.1.2.1.75.1.3.1.1.7
The number of Delimiter Errors detected by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortAddressIdErrors 1.3.6.1.2.1.75.1.3.1.1.8
The number of address identifier errors detected by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9
The number of Link Reset Protocol received by this FxPort from the attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortLinkResetOuts 1.3.6.1.2.1.75.1.3.1.1.10
The number of Link Reset Protocol issued by this FxPort to the attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortOlsIns 1.3.6.1.2.1.75.1.3.1.1.11
The number of Offline Sequence received by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortOlsOuts 1.3.6.1.2.1.75.1.3.1.1.12
The number of Offline Sequence issued by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFeAccounting 1.3.6.1.2.1.75.1.4
OBJECT IDENTIFIER    

fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1
A table that contains, one entry for each FxPort in the Fabric Element, Class 1 accounting information recorded since the management agent has re-initialized.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxPortC1AccountingEntry

fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1
An entry containing Class 1 accounting information for each FxPort.
OBJECT-TYPE    
  FcFxPortC1AccountingEntry  

fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1
The number of Class 1 frames (other than Class 1 connect- request) received by this FxPort from its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2
The number of Class 1 frames (other than Class 1 connect- request) delivered through this FxPort to its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3
The number of Class 1 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4
The number of Class 1 frame octets, including the frame delimiters, delivered through this FxPort its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5
The number of Class 1 frames discarded by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6
The number of F_BSY frames generated by this FxPort against Class 1 connect-request.
OBJECT-TYPE    
  Counter32  

fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7
The number of F_RJT frames generated by this FxPort against Class 1 connect-request.
OBJECT-TYPE    
  Counter32  

fcFxPortC1InConnections 1.3.6.1.2.1.75.1.4.1.1.8
The number of Class 1 connections successfully established in which the attached NxPort is the source of the connect- request.
OBJECT-TYPE    
  Counter32  

fcFxPortC1OutConnections 1.3.6.1.2.1.75.1.4.1.1.9
The number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect-request.
OBJECT-TYPE    
  Counter32  

fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.10
The cumulative time that this FxPort has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset.
OBJECT-TYPE    
  MilliSeconds  

fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.2
A table that contains, one entry for each FxPort in the Fabric Element, Class 2 accounting information recorded since the management agent has re-initialized.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxPortC2AccountingEntry

fcFxPortC2AccountingEntry 1.3.6.1.2.1.75.1.4.2.1
An entry containing Class 2 accounting information for each FxPort.
OBJECT-TYPE    
  FcFxPortC2AccountingEntry  

fcFxPortC2InFrames 1.3.6.1.2.1.75.1.4.2.1.1
The number of Class 2 frames received by this FxPort from its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC2OutFrames 1.3.6.1.2.1.75.1.4.2.1.2
The number of Class 2 frames delivered through this FxPort to its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3
The number of Class 2 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4
The number of Class 2 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5
The number of Class 2 frames discarded by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC2FbsyFrames 1.3.6.1.2.1.75.1.4.2.1.6
The number of F_BSY frames generated by this FxPort against Class 2 frames.
OBJECT-TYPE    
  Counter32  

fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7
The number of F_RJT frames generated by this FxPort against Class 2 frames.
OBJECT-TYPE    
  Counter32  

fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3
A table that contains, one entry for each FxPort in the Fabric Element, Class 3 accounting information recorded since the management agent has re-initialized.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxPortC3AccountingEntry

fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.1
An entry containing Class 3 accounting information for each FxPort.
OBJECT-TYPE    
  FcFxPortC3AccountingEntry  

fcFxPortC3InFrames 1.3.6.1.2.1.75.1.4.3.1.1
The number of Class 3 frames received by this FxPort from its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC3OutFrames 1.3.6.1.2.1.75.1.4.3.1.2
The number of Class 3 frames delivered through this FxPort to its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.3
The number of Class 3 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC3OutOctets 1.3.6.1.2.1.75.1.4.3.1.4
The number of Class 3 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.
OBJECT-TYPE    
  Counter32  

fcFxPortC3Discards 1.3.6.1.2.1.75.1.4.3.1.5
The number of Class 3 frames discarded by this FxPort.
OBJECT-TYPE    
  Counter32  

fcFeCapabilities 1.3.6.1.2.1.75.1.5
OBJECT IDENTIFIER    

fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1
A table that contains, one entry for each FxPort, the capabilities of the port within the Fabric Element.
OBJECT-TYPE    
  SEQUENCE OF  
    FcFxPortCapEntry

fcFxPortCapEntry 1.3.6.1.2.1.75.1.5.1.1
An entry containing the Cap of a FxPort.
OBJECT-TYPE    
  FcFxPortCapEntry  

fcFxPortCapFcphVersionHigh 1.3.6.1.2.1.75.1.5.1.1.1
The highest or most recent version of FC-PH that the FxPort is capable of supporting.
OBJECT-TYPE    
  FcphVersion  

fcFxPortCapFcphVersionLow 1.3.6.1.2.1.75.1.5.1.1.2
The lowest or earliest version of FC-PH that the FxPort is capable of supporting.
OBJECT-TYPE    
  FcphVersion  

fcFxPortCapBbCreditMax 1.3.6.1.2.1.75.1.5.1.1.3
The maximum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.
OBJECT-TYPE    
  FcBbCredit  

fcFxPortCapBbCreditMin 1.3.6.1.2.1.75.1.5.1.1.4
The minimum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.
OBJECT-TYPE    
  FcBbCredit  

fcFxPortCapRxDataFieldSizeMax 1.3.6.1.2.1.75.1.5.1.1.5
The maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.
OBJECT-TYPE    
  FcRxDataFieldSize  

fcFxPortCapRxDataFieldSizeMin 1.3.6.1.2.1.75.1.5.1.1.6
The minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.
OBJECT-TYPE    
  FcRxDataFieldSize  

fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7
A value indicating the set of Classes of Service that the FxPort is capable of supporting.
OBJECT-TYPE    
  FcCosCap  

fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8
A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service.
OBJECT-TYPE    
  TruthValue  

fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9
A value indicating the mode of Stacked Connect request that the FxPort is capable of supporting.
OBJECT-TYPE    
  FcStackedConnMode  

fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.10
A flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery.
OBJECT-TYPE    
  TruthValue  

fcFxPortCapClass3SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.11
A flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery.
OBJECT-TYPE    
  TruthValue  

fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12
The maximum holding time (in microseconds) that the FxPort is capable of supporting.
OBJECT-TYPE    
  MicroSeconds  

fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13
The minimum holding time (in microseconds) that the FxPort is capable of supporting.
OBJECT-TYPE    
  MicroSeconds  

fcFeMIBConformance 1.3.6.1.2.1.75.2
OBJECT IDENTIFIER    

fcFeMIBCompliances 1.3.6.1.2.1.75.2.1
OBJECT IDENTIFIER    

fcFeMIBMinimumCompliance 1.3.6.1.2.1.75.2.1.1
The minimum compliance statement for SNMP entities which implement the FIBRE-CHANNEL-FE-MIB.
MODULE-COMPLIANCE    

fcFeMIBFullCompliance 1.3.6.1.2.1.75.2.1.2
The full compliance statement for SNMP entities which implement the FIBRE-CHANNEL-FE-MIB.
MODULE-COMPLIANCE    

fcFeMIBGroups 1.3.6.1.2.1.75.2.2
OBJECT IDENTIFIER    

fcFeConfigGroup 1.3.6.1.2.1.75.2.2.1
A collection of objects providing the configuration and service parameters of the Fabric Element, the modules, and FxPorts.
OBJECT-GROUP    

fcFeStatusGroup 1.3.6.1.2.1.75.2.2.2
A collection of objects providing the operational status and established service parameters for the Fabric Element and the attached NxPorts.
OBJECT-GROUP    

fcFeErrorGroup 1.3.6.1.2.1.75.2.2.3
A collection of objects providing various error statistics detected by the FxPorts.
OBJECT-GROUP    

fcFeClass1AccountingGroup 1.3.6.1.2.1.75.2.2.4
A collection of objects providing various class 1 performance statistics detected by the FxPorts.
OBJECT-GROUP    

fcFeClass2AccountingGroup 1.3.6.1.2.1.75.2.2.5
A collection of objects providing various class 2 performance statistics detected by the FxPorts.
OBJECT-GROUP    

fcFeClass3AccountingGroup 1.3.6.1.2.1.75.2.2.6
A collection of objects providing various class 3 performance statistics detected by the FxPorts.
OBJECT-GROUP    

fcFeCapabilitiesGroup 1.3.6.1.2.1.75.2.2.7
A collection of objects providing the inherent capability of each FxPort within the Fabric Element.
OBJECT-GROUP    

Defined Objects

MilliSeconds  
Represents time unit value in milliseconds.
TEXTUAL-CONVENTION    
  Unsigned32  

MicroSeconds  
Represents time unit value in microseconds.
TEXTUAL-CONVENTION    
  Unsigned32  

FcNameId  
Represents the Worldwide Name associated with a Fibre Channel (FC) entity.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(8)  

FcAddressId  
Represents Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(3)  

FcRxDataFieldSize  
Represents the receive data field size of an NxPort or FxPort.
TEXTUAL-CONVENTION    
  Integer32 128..2112  

FcBbCredit  
Represents the buffer-to-buffer credit of an NxPort or FxPort.
TEXTUAL-CONVENTION    
  Integer32 0..32767  

FcphVersion  
Represents the version of FC-PH supported by an NxPort or FxPort.
TEXTUAL-CONVENTION    
  Integer32 0..255  

FcStackedConnMode  
Represents an enumerated value used to indicate the Class 1 Stacked Connect Mode supported by an NxPort or FxPort.
TEXTUAL-CONVENTION    
  INTEGER none(1), transparent(2), lockedDown(3)  

FcCosCap  
Represents the class of service capability of an NxPort or FxPort.
TEXTUAL-CONVENTION    
  BITS classF(0), class1(1), class2(2), class3(3), class4(4), class5(5), class6(6)  

FcFeModuleCapacity  
Represents the maximum number of modules within a Fabric Element.
TEXTUAL-CONVENTION    
  Unsigned32  

FcFeFxPortCapacity  
Represents the maximum number of FxPorts within a module.
TEXTUAL-CONVENTION    
  Unsigned32  

FcFeModuleIndex  
Represents the module index within a conceptual table.
TEXTUAL-CONVENTION    
  Unsigned32  

FcFeFxPortIndex  
Represents the FxPort index within a conceptual table.
TEXTUAL-CONVENTION    
  Unsigned32  

FcFeNxPortIndex  
Represents the NxPort index within a conceptual table.
TEXTUAL-CONVENTION    
  Integer32 1..126  

FcBbCreditModel  
Represents the BB_Credit model of an FxPort.
TEXTUAL-CONVENTION    
  INTEGER regular(1), alternate(2)  

FcFeModuleEntry  
SEQUENCE    
  FcFeModuleIndex as fcFeModuleIndex  
  SnmpAdminString as fcFeModuleDescr  
  OBJECT IDENTIFIER as fcFeModuleObjectID  
  INTEGER as fcFeModuleOperStatus  
  TimeStamp as fcFeModuleLastChange  
  FcFeFxPortCapacity as fcFeModuleFxPortCapacity  
  FcNameId as fcFeModuleName  

FcFxPortEntry  
SEQUENCE    
  FcFeFxPortIndex as fcFxPortIndex  
  FcNameId as fcFxPortName  
  FcphVersion as fcFxPortFcphVersionHigh  
  FcphVersion as fcFxPortFcphVersionLow  
  FcBbCredit as fcFxPortBbCredit  
  FcRxDataFieldSize as fcFxPortRxBufSize  
  MilliSeconds as fcFxPortRatov  
  MilliSeconds as fcFxPortEdtov  
  FcCosCap as fcFxPortCosSupported  
  TruthValue as fcFxPortIntermixSupported  
  FcStackedConnMode as fcFxPortStackedConnMode  
  TruthValue as fcFxPortClass2SeqDeliv  
  TruthValue as fcFxPortClass3SeqDeliv  
  MicroSeconds as fcFxPortHoldTime  

FcFxPortStatusEntry  
SEQUENCE    
  FcAddressId as fcFxPortID  
  Gauge32 as fcFxPortBbCreditAvailable  
  INTEGER as fcFxPortOperMode  
  INTEGER as fcFxPortAdminMode  

FcFxPortPhysEntry  
SEQUENCE    
  INTEGER as fcFxPortPhysAdminStatus  
  INTEGER as fcFxPortPhysOperStatus  
  TimeStamp as fcFxPortPhysLastChange  
  MilliSeconds as fcFxPortPhysRttov  

FcFxLoginEntry  
SEQUENCE    
  FcFeNxPortIndex as fcFxPortNxLoginIndex  
  FcphVersion as fcFxPortFcphVersionAgreed  
  FcBbCredit as fcFxPortNxPortBbCredit  
  FcRxDataFieldSize as fcFxPortNxPortRxDataFieldSize  
  FcCosCap as fcFxPortCosSuppAgreed  
  TruthValue as fcFxPortIntermixSuppAgreed  
  FcStackedConnMode as fcFxPortStackedConnModeAgreed  
  TruthValue as fcFxPortClass2SeqDelivAgreed  
  TruthValue as fcFxPortClass3SeqDelivAgreed  
  FcNameId as fcFxPortNxPortName  
  FcAddressId as fcFxPortConnectedNxPort  
  FcBbCreditModel as fcFxPortBbCreditModel  

FcFxPortErrorEntry  
SEQUENCE    
  Counter32 as fcFxPortLinkFailures  
  Counter32 as fcFxPortSyncLosses  
  Counter32 as fcFxPortSigLosses  
  Counter32 as fcFxPortPrimSeqProtoErrors  
  Counter32 as fcFxPortInvalidTxWords  
  Counter32 as fcFxPortInvalidCrcs  
  Counter32 as fcFxPortDelimiterErrors  
  Counter32 as fcFxPortAddressIdErrors  
  Counter32 as fcFxPortLinkResetIns  
  Counter32 as fcFxPortLinkResetOuts  
  Counter32 as fcFxPortOlsIns  
  Counter32 as fcFxPortOlsOuts  

FcFxPortC1AccountingEntry  
SEQUENCE    
  Counter32 as fcFxPortC1InFrames  
  Counter32 as fcFxPortC1OutFrames  
  Counter32 as fcFxPortC1InOctets  
  Counter32 as fcFxPortC1OutOctets  
  Counter32 as fcFxPortC1Discards  
  Counter32 as fcFxPortC1FbsyFrames  
  Counter32 as fcFxPortC1FrjtFrames  
  Counter32 as fcFxPortC1InConnections  
  Counter32 as fcFxPortC1OutConnections  
  MilliSeconds as fcFxPortC1ConnTime  

FcFxPortC2AccountingEntry  
SEQUENCE    
  Counter32 as fcFxPortC2InFrames  
  Counter32 as fcFxPortC2OutFrames  
  Counter32 as fcFxPortC2InOctets  
  Counter32 as fcFxPortC2OutOctets  
  Counter32 as fcFxPortC2Discards  
  Counter32 as fcFxPortC2FbsyFrames  
  Counter32 as fcFxPortC2FrjtFrames  

FcFxPortC3AccountingEntry  
SEQUENCE    
  Counter32 as fcFxPortC3InFrames  
  Counter32 as fcFxPortC3OutFrames  
  Counter32 as fcFxPortC3InOctets  
  Counter32 as fcFxPortC3OutOctets  
  Counter32 as fcFxPortC3Discards  

FcFxPortCapEntry  
SEQUENCE    
  FcphVersion as fcFxPortCapFcphVersionHigh  
  FcphVersion as fcFxPortCapFcphVersionLow  
  FcBbCredit as fcFxPortCapBbCreditMax  
  FcBbCredit as fcFxPortCapBbCreditMin  
  FcRxDataFieldSize as fcFxPortCapRxDataFieldSizeMax  
  FcRxDataFieldSize as fcFxPortCapRxDataFieldSizeMin  
  FcCosCap as fcFxPortCapCos  
  TruthValue as fcFxPortCapIntermix  
  FcStackedConnMode as fcFxPortCapStackedConnMode  
  TruthValue as fcFxPortCapClass2SeqDeliv  
  TruthValue as fcFxPortCapClass3SeqDeliv  
  MicroSeconds as fcFxPortCapHoldTimeMax  
  MicroSeconds as fcFxPortCapHoldTimeMin