FIBRONICS-PROPRIETARY-FX8210-B-MIB

File: FIBRONICS-PROPRIETARY-FX8210-B-MIB.mib (149401 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises NetworkAddress IpAddress
Counter Gauge TimeTicks
OBJECT-TYPE

Defined Objects

spartacus 1.3.6.1.4.1.22
OBJECT IDENTIFIER    

dec 1.3.6.1.4.1.22.2
OBJECT IDENTIFIER    

decrun 1.3.6.1.4.1.22.2.1
OBJECT IDENTIFIER    

rcircs 1.3.6.1.4.1.22.2.1.1
OBJECT IDENTIFIER    

rCircNum 1.3.6.1.4.1.22.2.1.1.1
OBJECT-TYPE    
  INTEGER  

rccTable 1.3.6.1.4.1.22.2.1.1.2
OBJECT-TYPE    
  SEQUENCE OF  
    RccEntry

rccEntry 1.3.6.1.4.1.22.2.1.1.2.1
OBJECT-TYPE    
  RccEntry  

rccIndex 1.3.6.1.4.1.22.2.1.1.2.1.1
OBJECT-TYPE    
  INTEGER  

rccState 1.3.6.1.4.1.22.2.1.1.2.1.2
OBJECT-TYPE    
  INTEGER  

rccType 1.3.6.1.4.1.22.2.1.1.2.1.3
OBJECT-TYPE    
  INTEGER  

rccCost 1.3.6.1.4.1.22.2.1.1.2.1.4
OBJECT-TYPE    
  INTEGER  

rccBSize 1.3.6.1.4.1.22.2.1.1.2.1.5
OBJECT-TYPE    
  INTEGER  

rccHTimer 1.3.6.1.4.1.22.2.1.1.2.1.6
OBJECT-TYPE    
  INTEGER  

rccLine 1.3.6.1.4.1.22.2.1.1.2.1.7
OBJECT-TYPE    
  INTEGER  

rbcTable 1.3.6.1.4.1.22.2.1.1.3
OBJECT-TYPE    
  SEQUENCE OF  
    RbcEntry

rbcEntry 1.3.6.1.4.1.22.2.1.1.3.1
The INDEX value specified should correspond to the index of the circuit of the desired entry.
OBJECT-TYPE    
  RbcEntry  

rbcDrout 1.3.6.1.4.1.22.2.1.1.3.1.1
OBJECT-TYPE    
  OCTET STRING  

rbcMrout 1.3.6.1.4.1.22.2.1.1.3.1.2
OBJECT-TYPE    
  INTEGER  

rbcRpri 1.3.6.1.4.1.22.2.1.1.3.1.3
OBJECT-TYPE    
  INTEGER  

rCCntrs 1.3.6.1.4.1.22.2.1.1.4
OBJECT-TYPE    
  SEQUENCE OF  
    RCCntrEntry

rCCntrEntry 1.3.6.1.4.1.22.2.1.1.4.1
The INDEX value specified should correspond to the index of the circuit of the desired entry.
OBJECT-TYPE    
  RCCntrEntry  

rCCntTePktsIn 1.3.6.1.4.1.22.2.1.1.4.1.1
OBJECT-TYPE    
  Counter  

rCCntOPktsOut 1.3.6.1.4.1.22.2.1.1.4.1.2
OBJECT-TYPE    
  Counter  

rCCntTrPktsIn 1.3.6.1.4.1.22.2.1.1.4.1.3
OBJECT-TYPE    
  Counter  

rCCntTrPktsOut 1.3.6.1.4.1.22.2.1.1.4.1.4
OBJECT-TYPE    
  Counter  

rCCntAdjDown 1.3.6.1.4.1.22.2.1.1.4.1.5
OBJECT-TYPE    
  Counter  

rnodes 1.3.6.1.4.1.22.2.1.2
OBJECT IDENTIFIER    

rnNmParms 1.3.6.1.4.1.22.2.1.2.1
OBJECT IDENTIFIER    

rnNmId 1.3.6.1.4.1.22.2.1.2.1.1
OBJECT-TYPE    
  OCTET STRING  

rnNmPaddr 1.3.6.1.4.1.22.2.1.2.1.2
OBJECT-TYPE    
  OCTET STRING  

rnRtParms 1.3.6.1.4.1.22.2.1.2.2
OBJECT IDENTIFIER    

rnRpAMaxC 1.3.6.1.4.1.22.2.1.2.2.1
OBJECT-TYPE    
  INTEGER  

rnRpAMaxH 1.3.6.1.4.1.22.2.1.2.2.2
OBJECT-TYPE    
  INTEGER  

rnRpBRtTmr 1.3.6.1.4.1.22.2.1.2.2.3
OBJECT-TYPE    
  INTEGER  

rnRpBSize 1.3.6.1.4.1.22.2.1.2.2.4
OBJECT-TYPE    
  INTEGER  

rnRpMAddr 1.3.6.1.4.1.22.2.1.2.2.5
OBJECT-TYPE    
  INTEGER  

rnRpMArea 1.3.6.1.4.1.22.2.1.2.2.6
OBJECT-TYPE    
  INTEGER  

rnRpMaxBNR 1.3.6.1.4.1.22.2.1.2.2.7
OBJECT-TYPE    
  INTEGER  

rnRpMaxBR 1.3.6.1.4.1.22.2.1.2.2.8
OBJECT-TYPE    
  INTEGER  

rnRpMaxCir 1.3.6.1.4.1.22.2.1.2.2.9
OBJECT-TYPE    
  INTEGER  

rnRpMaxCost 1.3.6.1.4.1.22.2.1.2.2.10
OBJECT-TYPE    
  INTEGER  

rnRpMaxHops 1.3.6.1.4.1.22.2.1.2.2.11
OBJECT-TYPE    
  INTEGER  

rnRpMaxV 1.3.6.1.4.1.22.2.1.2.2.12
OBJECT-TYPE    
  INTEGER  

rnRpVers 1.3.6.1.4.1.22.2.1.2.2.13
OBJECT-TYPE    
  OCTET STRING  

rnRpSegBuf 1.3.6.1.4.1.22.2.1.2.2.14
OBJECT-TYPE    
  INTEGER  

rnRpType 1.3.6.1.4.1.22.2.1.2.2.15
OBJECT-TYPE    
  INTEGER  

rnRpAddr 1.3.6.1.4.1.22.2.1.2.2.16
OBJECT-TYPE    
  OCTET STRING  

rnRpUseL2A 1.3.6.1.4.1.22.2.1.2.2.17
OBJECT-TYPE    
  INTEGER  

rnRtCount 1.3.6.1.4.1.22.2.1.2.3
OBJECT IDENTIFIER    

rnRcAgedPkt 1.3.6.1.4.1.22.2.1.2.3.1
OBJECT-TYPE    
  Counter  

rnRcUnReach 1.3.6.1.4.1.22.2.1.2.3.2
OBJECT-TYPE    
  Counter  

rnRcBadRange 1.3.6.1.4.1.22.2.1.2.3.3
OBJECT-TYPE    
  Counter  

rnRcOversize 1.3.6.1.4.1.22.2.1.2.3.4
OBJECT-TYPE    
  Counter  

rnRcFormErr 1.3.6.1.4.1.22.2.1.2.3.5
OBJECT-TYPE    
  Counter  

rnRcRtUpLoss 1.3.6.1.4.1.22.2.1.2.3.6
OBJECT-TYPE    
  Counter  

rnAdjTbl 1.3.6.1.4.1.22.2.1.2.4
OBJECT-TYPE    
  SEQUENCE OF  
    RnAdjEnt

rnAdjEnt 1.3.6.1.4.1.22.2.1.2.4.1
OBJECT-TYPE    
  RnAdjEnt  

rnAdjAddr 1.3.6.1.4.1.22.2.1.2.4.1.1
OBJECT-TYPE    
  OCTET STRING  

rnAdjState 1.3.6.1.4.1.22.2.1.2.4.1.2
OBJECT-TYPE    
  INTEGER  

rnAdjType 1.3.6.1.4.1.22.2.1.2.4.1.3
OBJECT-TYPE    
  INTEGER  

rnAdjCIdx 1.3.6.1.4.1.22.2.1.2.4.1.4
OBJECT-TYPE    
  INTEGER  

rnAdjBSize 1.3.6.1.4.1.22.2.1.2.4.1.5
OBJECT-TYPE    
  INTEGER  

rnAdjLTmr 1.3.6.1.4.1.22.2.1.2.4.1.6
OBJECT-TYPE    
  INTEGER  

rnAdjPri 1.3.6.1.4.1.22.2.1.2.4.1.7
OBJECT-TYPE    
  INTEGER  

rnLvl1Tbl 1.3.6.1.4.1.22.2.1.2.5
OBJECT-TYPE    
  SEQUENCE OF  
    RnLvl1Ent

rnLvl1Ent 1.3.6.1.4.1.22.2.1.2.5.1
OBJECT-TYPE    
  RnLvl1Ent  

rnLvl1Addr 1.3.6.1.4.1.22.2.1.2.5.1.1
OBJECT-TYPE    
  OCTET STRING  

rnLvl1Cidx 1.3.6.1.4.1.22.2.1.2.5.1.2
OBJECT-TYPE    
  INTEGER  

rnLvl1Cost 1.3.6.1.4.1.22.2.1.2.5.1.3
OBJECT-TYPE    
  INTEGER  

rnLvl1Hops 1.3.6.1.4.1.22.2.1.2.5.1.4
OBJECT-TYPE    
  INTEGER  

rnLvl1Next 1.3.6.1.4.1.22.2.1.2.5.1.5
OBJECT-TYPE    
  OCTET STRING  

rareas 1.3.6.1.4.1.22.2.1.3
OBJECT IDENTIFIER    

raParmTbl 1.3.6.1.4.1.22.2.1.3.1
OBJECT-TYPE    
  SEQUENCE OF  
    RaParmEntry

raParmEntry 1.3.6.1.4.1.22.2.1.3.1.1
OBJECT-TYPE    
  RaParmEntry  

raNum 1.3.6.1.4.1.22.2.1.3.1.1.1
OBJECT-TYPE    
  INTEGER  

raCIdx 1.3.6.1.4.1.22.2.1.3.1.1.2
OBJECT-TYPE    
  INTEGER  

raCost 1.3.6.1.4.1.22.2.1.3.1.1.3
OBJECT-TYPE    
  INTEGER  

raHops 1.3.6.1.4.1.22.2.1.3.1.1.4
OBJECT-TYPE    
  INTEGER  

raNext 1.3.6.1.4.1.22.2.1.3.1.1.5
OBJECT-TYPE    
  OCTET STRING  

decperm 1.3.6.1.4.1.22.2.2
OBJECT IDENTIFIER    

pcircs 1.3.6.1.4.1.22.2.2.1
OBJECT IDENTIFIER    

pccTable 1.3.6.1.4.1.22.2.2.1.1
OBJECT-TYPE    
  SEQUENCE OF  
    PccEntry

pccEntry 1.3.6.1.4.1.22.2.2.1.1.1
OBJECT-TYPE    
  PccEntry  

pccIndex 1.3.6.1.4.1.22.2.2.1.1.1.1
OBJECT-TYPE    
  INTEGER  

pccState 1.3.6.1.4.1.22.2.2.1.1.1.2
OBJECT-TYPE    
  INTEGER  

pccCost 1.3.6.1.4.1.22.2.2.1.1.1.3
OBJECT-TYPE    
  INTEGER  

pccHTimer 1.3.6.1.4.1.22.2.2.1.1.1.4
OBJECT-TYPE    
  INTEGER  

pbcTable 1.3.6.1.4.1.22.2.2.1.2
OBJECT-TYPE    
  SEQUENCE OF  
    PbcEntry

pbcEntry 1.3.6.1.4.1.22.2.2.1.2.1
The INDEX value specified should correspond to the index of the circuit of the desired entry.
OBJECT-TYPE    
  PbcEntry  

pbcMrout 1.3.6.1.4.1.22.2.2.1.2.1.1
OBJECT-TYPE    
  INTEGER  

pbcRpri 1.3.6.1.4.1.22.2.2.1.2.1.2
OBJECT-TYPE    
  INTEGER  

pnodes 1.3.6.1.4.1.22.2.2.2
OBJECT IDENTIFIER    

pnRtParms 1.3.6.1.4.1.22.2.2.2.1
OBJECT IDENTIFIER    

pnRpAMaxC 1.3.6.1.4.1.22.2.2.2.1.1
OBJECT-TYPE    
  INTEGER  

pnRpAMaxH 1.3.6.1.4.1.22.2.2.2.1.2
OBJECT-TYPE    
  INTEGER  

pnRpBRtTmr 1.3.6.1.4.1.22.2.2.2.1.3
OBJECT-TYPE    
  INTEGER  

pnRpBSize 1.3.6.1.4.1.22.2.2.2.1.4
OBJECT-TYPE    
  INTEGER  

pnRpMAddr 1.3.6.1.4.1.22.2.2.2.1.5
OBJECT-TYPE    
  INTEGER  

pnRpMArea 1.3.6.1.4.1.22.2.2.2.1.6
OBJECT-TYPE    
  INTEGER  

pnRpMaxBNR 1.3.6.1.4.1.22.2.2.2.1.7
OBJECT-TYPE    
  INTEGER  

pnRpMaxBR 1.3.6.1.4.1.22.2.2.2.1.8
OBJECT-TYPE    
  INTEGER  

pnRpMaxCost 1.3.6.1.4.1.22.2.2.2.1.9
OBJECT-TYPE    
  INTEGER  

pnRpMaxHops 1.3.6.1.4.1.22.2.2.2.1.10
OBJECT-TYPE    
  INTEGER  

pnRpMaxV 1.3.6.1.4.1.22.2.2.2.1.11
OBJECT-TYPE    
  INTEGER  

pnRpType 1.3.6.1.4.1.22.2.2.2.1.12
OBJECT-TYPE    
  INTEGER  

pnRpAddr 1.3.6.1.4.1.22.2.2.2.1.13
OBJECT-TYPE    
  OCTET STRING  

pnRpUseL2A 1.3.6.1.4.1.22.2.2.2.1.14
OBJECT-TYPE    
  INTEGER  

pnRpRstDaddr 1.3.6.1.4.1.22.2.2.2.1.15
OBJECT-TYPE    
  INTEGER  

pDecDefaults 1.3.6.1.4.1.22.2.2.3
When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree decperm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
OBJECT-TYPE    
  INTEGER reset-defaults(1)  

trap 1.3.6.1.4.1.22.3
OBJECT IDENTIFIER    

traprun 1.3.6.1.4.1.22.3.1
OBJECT IDENTIFIER    

rTrapAddrTbl 1.3.6.1.4.1.22.3.1.1
This table contains runtime information about destinations to which traps should be directed. Setting the rTrapAddrState to INACTIVE removes an entry from the table.
OBJECT-TYPE    
  SEQUENCE OF  
    RTrapAddrEntry

rTrapAddrEntry 1.3.6.1.4.1.22.3.1.1.1
This object contains runtime information about an individual trap destination.
OBJECT-TYPE    
  RTrapAddrEntry  

rTrapAddrAddr 1.3.6.1.4.1.22.3.1.1.1.1
The IP address of the network management entity to which traps (of the type specified in this table entry) should be sent.
OBJECT-TYPE    
  NetworkAddress  

rTrapAddrComm 1.3.6.1.4.1.22.3.1.1.1.2
Community string to be used in SNMP message generated to the receiving SNMP protocol entity.
OBJECT-TYPE    
  OCTET STRING  

rTrapAddrVer 1.3.6.1.4.1.22.3.1.1.1.3
The trap address table version number. The current (and only valid) version number is 1.
OBJECT-TYPE    
  INTEGER  

rTrapAddrType 1.3.6.1.4.1.22.3.1.1.1.4
A bit-encoded string, 1 byte in length, which contains information about which trap(s) should be directed to the management entity described by this table entry. The following list identifies the trap types and corresponding bit values. TRAP-STANDARD-MIB 1000 0000 TRAP-DIAG 0100 0000 TRAP-GNRL-PROPRIETARY 0010 0000 TRAP-ROUT 0001 0000 TRAP-DEBUG 0000 1000 TRAP-PROP-DEC4 0000 0100
OBJECT-TYPE    
  OCTET STRING  

rTrapAddrState 1.3.6.1.4.1.22.3.1.1.1.5
The state of this entry in the trap address table. Setting this object to INACTIVE removes the corresponding entry from the table.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

traperm 1.3.6.1.4.1.22.3.2
OBJECT IDENTIFIER    

pTrapAddrTbl 1.3.6.1.4.1.22.3.2.1
This table contains permanent information about destinations to which traps should be directed. Setting the pTrapAddrState to INACTIVE removes an entry from the table. This information is used to initialize the rTrapAddrTbl on unit startup.
OBJECT-TYPE    
  SEQUENCE OF  
    PTrapAddrEntry

pTrapAddrEntry 1.3.6.1.4.1.22.3.2.1.1
This object contains permanent information about an individual trap destination.
OBJECT-TYPE    
  PTrapAddrEntry  

pTrapAddrAddr 1.3.6.1.4.1.22.3.2.1.1.1
The IP address of the network management entity to which traps (of the type specified in this table entry) should be sent.
OBJECT-TYPE    
  NetworkAddress  

pTrapAddrComm 1.3.6.1.4.1.22.3.2.1.1.2
Community string to be used in SNMP message generated to the receiving SNMP protocol entity.
OBJECT-TYPE    
  OCTET STRING  

pTrapAddrVer 1.3.6.1.4.1.22.3.2.1.1.3
The trap address table version number. The current (and only valid) version number is 1.
OBJECT-TYPE    
  INTEGER  

pTrapAddrType 1.3.6.1.4.1.22.3.2.1.1.4
A bit-encoded string, 1 byte in length, which contains information about which trap(s) should be directed to the management entity described by this table entry. The following list identifies the trap types and corresponding bit values. TRAP-STANDARD-MIB 1000 0000 TRAP-DIAG 0100 0000 TRAP-GNRL-PROPRIETARY 0010 0000 TRAP-ROUT 0001 0000 TRAP-DEBUG 0000 1000 TRAP-PROP-DEC4 0000 0100
OBJECT-TYPE    
  OCTET STRING  

pTrapAddrState 1.3.6.1.4.1.22.3.2.1.1.5
The state of this entry in the trap address table. Setting this object to INACTIVE removes the corresponding entry from the table.
OBJECT-TYPE    
  INTEGER  

pTrapDefaults 1.3.6.1.4.1.22.3.2.2
When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree traperm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
OBJECT-TYPE    
  INTEGER reset-defautls(1)  

dec2 1.3.6.1.4.1.22.4
OBJECT IDENTIFIER    

dec2run 1.3.6.1.4.1.22.4.1
OBJECT IDENTIFIER    

rClParmTbl 1.3.6.1.4.1.22.4.1.1
OBJECT-TYPE    
  SEQUENCE OF  
    RClParmEntry

rClParmEntry 1.3.6.1.4.1.22.4.1.1.1
The INDEX value specified should correspond to the index of the interface of the desired entry.
OBJECT-TYPE    
  RClParmEntry  

rClState 1.3.6.1.4.1.22.4.1.1.1.1
OBJECT-TYPE    
  INTEGER  

rClSubSt 1.3.6.1.4.1.22.4.1.1.1.2
OBJECT-TYPE    
  INTEGER  

rBlParmTbl 1.3.6.1.4.1.22.4.1.2
OBJECT-TYPE    
  SEQUENCE OF  
    RBlParmEntry

rBlParmEntry 1.3.6.1.4.1.22.4.1.2.1
The INDEX value specified should correspond to the index of the interface of the desired entry.
OBJECT-TYPE    
  RBlParmEntry  

rBlHAddr 1.3.6.1.4.1.22.4.1.2.1.1
OBJECT-TYPE    
  OCTET STRING  

rElCountTbl 1.3.6.1.4.1.22.4.1.3
OBJECT-TYPE    
  SEQUENCE OF  
    RElCountEntry

rElCountEntry 1.3.6.1.4.1.22.4.1.3.1
The INDEX value specified should correspond to the index of the interface of the desired entry.
OBJECT-TYPE    
  RElCountEntry  

rElFrIn 1.3.6.1.4.1.22.4.1.3.1.1
OBJECT-TYPE    
  Counter  

rElFrOut 1.3.6.1.4.1.22.4.1.3.1.2
OBJECT-TYPE    
  Counter  

rElBcBIn 1.3.6.1.4.1.22.4.1.3.1.3
OBJECT-TYPE    
  Counter  

rElBcFIn 1.3.6.1.4.1.22.4.1.3.1.4
OBJECT-TYPE    
  Counter  

rElMcBIn 1.3.6.1.4.1.22.4.1.3.1.5
OBJECT-TYPE    
  Counter  

rElMcFIn 1.3.6.1.4.1.22.4.1.3.1.6
OBJECT-TYPE    
  Counter  

rElFDef 1.3.6.1.4.1.22.4.1.3.1.7
OBJECT-TYPE    
  Counter  

rElF1Col 1.3.6.1.4.1.22.4.1.3.1.8
OBJECT-TYPE    
  Counter  

rElFMCol 1.3.6.1.4.1.22.4.1.3.1.9
OBJECT-TYPE    
  Counter  

rElOutF 1.3.6.1.4.1.22.4.1.3.1.10
OBJECT-TYPE    
  Counter  

rElCDetF 1.3.6.1.4.1.22.4.1.3.1.11
OBJECT-TYPE    
  Counter  

rElInF 1.3.6.1.4.1.22.4.1.3.1.12
OBJECT-TYPE    
  Counter  

rElBadD 1.3.6.1.4.1.22.4.1.3.1.13
OBJECT-TYPE    
  Counter  

rElOvRun 1.3.6.1.4.1.22.4.1.3.1.14
OBJECT-TYPE    
  Counter  

rElNoBuf 1.3.6.1.4.1.22.4.1.3.1.15
OBJECT-TYPE    
  Counter  

dec2perm 1.3.6.1.4.1.22.4.2
OBJECT IDENTIFIER    

propSys 1.3.6.1.4.1.22.5
OBJECT IDENTIFIER    

propSysRun 1.3.6.1.4.1.22.5.1
OBJECT IDENTIFIER    

rTod 1.3.6.1.4.1.22.5.1.1
This is a 15 byte string containing the Greenwich Mean Time formatted as: YYMMDDHHMMSSUUU, where: YY = year DD = day HH = hours MM = minutes SS = seconds UUU = microseconds
OBJECT-TYPE    
  OCTET STRING  

rFddiIfIndex 1.3.6.1.4.1.22.5.1.2
The snmp Fddi interface Number
OBJECT-TYPE    
  INTEGER  

rPingTable 1.3.6.1.4.1.22.5.1.3
A table of requests for ping via ICMP echo. No modification of existing table entries is allowed, only addition of new entries.
OBJECT-TYPE    
  SEQUENCE OF  
    RPingEntry

rPingEntry 1.3.6.1.4.1.22.5.1.3.1
The list of parameters required to perform a ping request
OBJECT-TYPE    
  RPingEntry  

rPProto 1.3.6.1.4.1.22.5.1.3.1.1
The protocol to be used for the ping request. Future versions will also support Loopback Mirror and Decnet Circuit Loopback.
OBJECT-TYPE    
  INTEGER icmp-echo(1)  

rPDest 1.3.6.1.4.1.22.5.1.3.1.2
The network address of the node to ping.
OBJECT-TYPE    
  NetworkAddress  

rPTimeOut 1.3.6.1.4.1.22.5.1.3.1.3
Timeout in seconds to allow for the remote node to respond.
OBJECT-TYPE    
  INTEGER  

rPReply 1.3.6.1.4.1.22.5.1.3.1.4
Reply to ICMP echo received by agent. NOTE: Although this object is defined as read-write, attempting to write any value results in an error.
OBJECT-TYPE    
  INTEGER alive(1), no-response(2), in-process(3)  

rPState 1.3.6.1.4.1.22.5.1.3.1.5
The state of the entry. When this state is set to ACTIVE, the appropriate ping request will be issued by Brouter. A table entry with a state of INACTIVE is an invalidated entry and will not be returned to a get request.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

rDebugTable 1.3.6.1.4.1.22.5.1.4
A table of entries used to manage debug reporting from the Brouter.
OBJECT-TYPE    
  SEQUENCE OF  
    RDebugEntry

rDebugEntry 1.3.6.1.4.1.22.5.1.4.1
Variables needed to maintain the FPP debug mechanisms.
OBJECT-TYPE    
  RDebugEntry  

rDTaskId 1.3.6.1.4.1.22.5.1.4.1.1
Task-id assigned to the task being debugged. Task-id`s are assigned as follows: IP-ID 2 ICMP-ID 3 RIP-ID 4 UDP-ID 6 ARP-ID 7 KSMAP-ID 8 FMAINP-ID 9 SYSTEM-ID 10 PROXY-ARP-ID 11
OBJECT-TYPE    
  INTEGER  

rDDevStat 1.3.6.1.4.1.22.5.1.4.1.2
Indicates whether the development level debug messages for this module should be reported to the NMS.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rDRunStat 1.3.6.1.4.1.22.5.1.4.1.3
Indicates whether the runtime network diagnostic messages for this module should be reported to the NMS.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rUDnld 1.3.6.1.4.1.22.5.1.7
Setting this object to 1 has the side effect of causing the unit to perform a cold reset. Reading this object has no meaning. The value 1 is returned in response to a get or get-next request.
OBJECT-TYPE    
  INTEGER  

rURset 1.3.6.1.4.1.22.5.1.8
Setting this object to 1 has the side effect of causing the unit to perform a warm reset. Reading this object has no meaning. The value 1 is returned in response to a get or get-next request.
OBJECT-TYPE    
  INTEGER  

rUIpSw 1.3.6.1.4.1.22.5.1.10
Indicates the state of the IP routing feature. If this switch is turned OFF, IP traffic will not be routed through the brouter. IP messages destined for the brouter will be delivered to the unit's upper layers. This leaves the SNMP agent accessible to its manager even when IP routing is de-activated. If bridging is activated, the IP traffic will be bridged.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rUDecSw 1.3.6.1.4.1.22.5.1.11
Indicates the state of the Decnet feature. If this switch is turned OFF, no Decnet traffic will be routed through this unit. If bridging is activated, the Decnet trafic will be bridged.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rUBrSw 1.3.6.1.4.1.22.5.1.12
Indicates the state of the bridging feature. If this switch is turned OFF, no traffic will be bridged through this unit. All traffic will be required to be sent through one of the active routing functions.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rUIpCfg 1.3.6.1.4.1.22.5.1.13
Indicates the state of IP routing based on its (sub)net configuration. RT-CFG-HOST-ONLY indicates that there is only one IP address in the unit. All IP packets received while in this state will be bridged as an unknown protocol.
OBJECT-TYPE    
  INTEGER rt-cfg-host-only(1), rt-cfg-br-ether(2), rt-cfg-br-all(3), rt-cfg-rte-all(4)  

rURunningVersion 1.3.6.1.4.1.22.5.1.14
Indicates the running version.
OBJECT-TYPE    
  OCTET STRING  

rUDnldAllowed 1.3.6.1.4.1.22.5.1.15
Indicates whether downloading to the brouter's Flash memory will be permitted. If this flag is set to OFF the agent will refuse to download into its flash memory. At system start-up this parameter will be initialized to OFF. Once this has been set to ON, it will remain ON until either the user sets it to OFF or a download has been performed at which time the agent will set it to OFF.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

rUInitFlash 1.3.6.1.4.1.22.5.1.16
Indicates if the flash bank states are being initialized. If this object is set to TRUE, the side effect will be to cause the flash states to be initialized. If the flash is in the process of being initialized, a get or getnext operation performed on this object will return 1 (TRUE), otherwise it will return 2 (FALSE).
OBJECT-TYPE    
  INTEGER true(1), false(2)  

propSysPerm 1.3.6.1.4.1.22.5.2
OBJECT IDENTIFIER    

pPMibVer 1.3.6.1.4.1.22.5.2.2
Proprietary mib version number.
OBJECT-TYPE    
  INTEGER  

pEepVer 1.3.6.1.4.1.22.5.2.4
Version number supported in the EEPROM.
OBJECT-TYPE    
  INTEGER single-eth(1), dual-eth(2), brouter(3)  

pUIpSw 1.3.6.1.4.1.22.5.2.6
Permanently stored (EEPROM) value for IP routing status. See rUIpSw for a complete description. The default value for this object is ON.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pUDecSw 1.3.6.1.4.1.22.5.2.7
Permanently stored (EEPROM) value for DECnet routing status. See rUDecSw for a complete description. The default value for this object is ON.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pUBrSw 1.3.6.1.4.1.22.5.2.8
Permanently stored (EEPROM) value for bridging status. See rUBrSw for a complete description. The default value for this object is ON.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pUIpCfg 1.3.6.1.4.1.22.5.2.9
Permanently stored (EEPROM) value for IP configuration. See rUIpCfg for a complete description. The default value for this object is determined by the IP address stored in the permanent database.
OBJECT-TYPE    
  INTEGER  

pULoadVersion 1.3.6.1.4.1.22.5.2.10
Permanently stored (EEPROM) value for the desired load version. This value of this object indicates which flash-stored version is to be initiated upon reset of this unit.
OBJECT-TYPE    
  OCTET STRING  

pUDefaults 1.3.6.1.4.1.22.5.2.11
When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree propSysPerm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
OBJECT-TYPE    
  INTEGER  

pUFlashTable 1.3.6.1.4.1.22.5.2.12
Contains the information needed for Flash memory maintenance.
OBJECT-TYPE    
  SEQUENCE OF  
    PUFlashEntry

pUFlashEntry 1.3.6.1.4.1.22.5.2.12.1
Information about a particular bank of flash memory.
OBJECT-TYPE    
  PUFlashEntry  

flashIndex 1.3.6.1.4.1.22.5.2.12.1.1
A unique index value for each flash memory bank.
OBJECT-TYPE    
  INTEGER  

flashVersion 1.3.6.1.4.1.22.5.2.12.1.2
Indicates the version contained in this flash memory bank. If the flash memory bank is uninitialized or invalid, this object will contain a NULL string
OBJECT-TYPE    
  OCTET STRING  

flashState 1.3.6.1.4.1.22.5.2.12.1.3
OBJECT-TYPE    
  INTEGER valid(1), invalid(2), dnloading-in-process(3), reset-in-progress(4), reset-complete(5)  

sysPermBridgeAvailable 1.3.6.1.4.1.22.5.2.13
Indicates whether the unit supports bridging functionality or not.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

sysPermIpAvailable 1.3.6.1.4.1.22.5.2.14
Indicates whether the unit supports IP functionality or not. IP host functionality is always present.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

sysPermDecAvailable 1.3.6.1.4.1.22.5.2.15
Indicates whether the unit supports DECnet functionality or not.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

pUloadType 1.3.6.1.4.1.22.5.2.50
This object indicates the type of download to be exercised the next time the unit is loaded. It is a choice of: USER 1 MFG 2 DEV 3
OBJECT-TYPE    
  INTEGER  

propIp 1.3.6.1.4.1.22.6
OBJECT IDENTIFIER    

propIpRun 1.3.6.1.4.1.22.6.1
OBJECT IDENTIFIER    

rIpMaskTable 1.3.6.1.4.1.22.6.1.1
The list of address masks used by this router for determining its subnets.
OBJECT-TYPE    
  SEQUENCE OF  
    RIpMaskEntry

rIpMaskEntry 1.3.6.1.4.1.22.6.1.1.1
Items contained in the runtime Address Mask Table.
OBJECT-TYPE    
  RIpMaskEntry  

rMaskNet 1.3.6.1.4.1.22.6.1.1.1.1
The IP network this mask is defined for.
OBJECT-TYPE    
  NetworkAddress  

rMask 1.3.6.1.4.1.22.6.1.1.1.2
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  NetworkAddress  

rMaskState 1.3.6.1.4.1.22.6.1.1.1.3
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

rIpOurAddrTable 1.3.6.1.4.1.22.6.1.2
Proprietary extensions for the rfc1156 defined ipAddrTable.
OBJECT-TYPE    
  SEQUENCE OF  
    RIpOurAddrEntry

rIpOurAddrEntry 1.3.6.1.4.1.22.6.1.2.1
Proprietary extensions for the rfc1156 defined ipAddrEntry. A proprietary ipAddrTable entry contains 4 standard objects and the 4 proprietary objects listed below. The standard objects are: ipAdEntAddr, ipAdEntIfIndex, ipAdEntNetMask and ipAdEntBcastAddr. To add an ipAddrEntry to the ipAddrTable, the rAddrState is the validating item. Therefore, rAddrState must be the last item in the message when adding an entry. The ipAdEntNetMask is determined by the agent. There is a separate mechanism that allows the user to define address masks for the unit. See rIpMaskTable and pIpMaskTable. To add to the ipAddrTable the agent requires the ipAdEntAddr, ipAdEntIfIndex, ipAdEntBcastAddr, rAddrDBcast, rAddrRipMetric and the rAddrRipState followed by the rAddrState. There are 4 default values provided by the agent for this entry: ipAdEntBcastAddr defaults to 'all ones', rAddrDbcast defaults to 'no directed broadcast', rAddrRipState defaults to ON and rAddrRipMetric defaults to 1. To remove an ipAddrEntry, the rAddrState should be set to INACTIVE. The INDEX value specified should correspond to the IP address of the desired entry.
OBJECT-TYPE    
  RIpOurAddrEntry  

rAddrDbcast 1.3.6.1.4.1.22.6.1.2.1.1
Allows the user to set the directed broadcast parameter of an IP network. Default value is 'no directed broadcast'.
OBJECT-TYPE    
  INTEGER no-directed-bdcst(1), bdcst-host(2), bdcst-net(3)  

rAddrRipMetric 1.3.6.1.4.1.22.6.1.2.1.2
A number from 1 to 15 used to calculate the metrics to given destinations, RIP will add this metric to metrics received from other RIP gateways on this (sub)network. In effect, this can be used to prioritize the (sub)network used for a destination reachable via more than one Brouter (sub)network. Default value is 1.
OBJECT-TYPE    
  INTEGER  

rAddrRipState 1.3.6.1.4.1.22.6.1.2.1.3
Defines the current state of the RIP protocol for this IP network. The default value is ON.
OBJECT-TYPE    
  INTEGER on(1), off(2), quiet(3)  

rAddrState 1.3.6.1.4.1.22.6.1.2.1.4
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

rIpIfTable 1.3.6.1.4.1.22.6.1.3
Proprietary extensions for the rfc1156 defined ifTable.
OBJECT-TYPE    
  SEQUENCE OF  
    RIpIfEntry

rIpIfEntry 1.3.6.1.4.1.22.6.1.3.1
Proprietary extensions for the rfc1156 defined ifEntry. The INDEX value specified should correspond to the index of the interface of the desired entry.
OBJECT-TYPE    
  RIpIfEntry  

rIfArpStat 1.3.6.1.4.1.22.6.1.3.1.1
Allows the user to turn ARP on and off for the interface.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rIfPArpStat 1.3.6.1.4.1.22.6.1.3.1.2
Allows the user to turn proxy ARP on and off for the interface.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rIfBcMask 1.3.6.1.4.1.22.6.1.3.1.3
When set to ON, Brouter will broadcast its address mask on start up. When set to OFF, the Brouter will not broadcast its address mask on start up.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rDftGw 1.3.6.1.4.1.22.6.1.4
The IP address of the default gateway.
OBJECT-TYPE    
  NetworkAddress  

rIpAtTable 1.3.6.1.4.1.22.6.1.5
Proprietary extensions for the rfc1156 defined atTable.
OBJECT-TYPE    
  SEQUENCE OF  
    RIpAtEntry

rIpAtEntry 1.3.6.1.4.1.22.6.1.5.1
Proprietary extensions for the rfc1156 defined atEntry. A proprietary atTable entry contains 3 standard objects and the 2 proprietary objects listed below. The standard objects are: atIfIndex, atPhysAddress and atNetAddress. To add an atEntry to the atTable, MIB-II defines the atPhysAddress as the validating item. Therefore, atPhysAddress must be the last item in the message when adding an entry. To add to the atTable the user must provide the atNetAddress followed by the atPhysAddress. The 2 proprietary objects associated with this entry are provided by the agent. The rAtAge is incremented as the entry ages and the rAtStatic entry is set to static. All atEntries manually defined are considered static and are not removed by the agent until specifically requested by the manager. To remove an atEntry, the atPhysAddress should be set to a NULL string. The INDEX value is constructed from the interface index of the desired entry, the integer value 1, and the network address of the desired entry.
OBJECT-TYPE    
  RIpAtEntry  

rAtStatic 1.3.6.1.4.1.22.6.1.5.1.1
Defines an entry as static or dynamic. A static entry is one that has been entered manually by the network administrator and can be changed only by the network administrator. The routing protocols never overwrite a static entry. A dynamic entry is one created by the routing protocols and is updated by them as per standard definitions.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

rAtAge 1.3.6.1.4.1.22.6.1.5.1.2
The age of the entry in minutes.
OBJECT-TYPE    
  INTEGER  

rIpRtTable 1.3.6.1.4.1.22.6.1.6
Proprietary extensions for the rfc1156 defined ipRoutingTable.
OBJECT-TYPE    
  SEQUENCE OF  
    RIpRtEntry

rIpRtEntry 1.3.6.1.4.1.22.6.1.6.1
Proprietary extensions for the rfc1156 defined ipRoutingEntry. A proprietary ipRouteEntry entry contains 10 standard objects and the proprietary object listed below. The standard objects are: ipRouteDest, ipRouteIfIndex, ipRouteMetric1, ipRouteMetric2, ipRouteMetric3, ipRouteMetric4, ipRouteNextHop, ipRouteType, ipRouteProto and ipRouteAge. To add an atEntry to the ipRoutingTable, MIB-II defines the ipRouteType as the validating item. Therefore, ipRouteType must be the last item in the message when adding an entry. All items, both proprietary and standard, except the ipRouteDest, ipRouteNextHop, ipRouteMetric1, and ipRouteType are determined by the agent. To add to the ipRouteEntry the agent requires the ipRouteDest, ipRouteNextHop, and the ipRouteMetric1 followed by the ipRouteType. The ipRouteIfIndex is determined by the agent based on the ipRouteDest. The ipRouteMetric2, ipRouteMetric3 and ipRouteMetric4 are not used by the router and are set to zero. The ipRouteProto is set to local and rRtStatic is set to static. All ipRouteEntries manually defined are considered static and are not removed by the agent until specifically requested by the manager. If the ipRouteMetric1 is not provided, it's value defaults to 1. To remove an ipRouteEntry, the ipRouteType should be set to invalid. The INDEX value specified should correspond to the destination IP address of the desired entry.
OBJECT-TYPE    
  RIpRtEntry  

rRtStatic 1.3.6.1.4.1.22.6.1.6.1.1
Defines an entry as static or dynamic. A static entry is one that has been entered manually by the network administrator and can be changed only by the network administrator. The routing protocols never overwrite a static entry. A dynamic entry is one created by the routing protocols and is updated by them as per standard definitions.
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

rRipTrInd 1.3.6.1.4.1.22.6.1.7
This flag indicates whether the rRipTrustTable is used to list trusted or not-trusted gateways. When the state is changed, all existing entries in the table are cleared. The default value is OFF. Setting this object to OFF causes the trust list to be removed and the router is returned to the default state of TRUST ALL.
OBJECT-TYPE    
  INTEGER off(2), trusted(3), not-trusted(4)  

rRipTrustTable 1.3.6.1.4.1.22.6.1.8
This table has 2 possible meanings depending on the value of rRipTrInd. These 2 configuration options allow the network administrator to limit RIP's scope for inbound processing. Outbound processing in not affected by this table. If rRipTrInd is set to TRUSTED, RIP listens only to the indicated gateways and no others. If rRipTrInd is set to NOT-TRUSTED, RIP does not listen to the indicated gateways but will accept updates from all other gateways. If the value of rRipTrInd is changed, this table is cleared. If the table is empty, it is assumed that all gateways are to be trusted or not-trusted depending on the value of rRipTrInd. The default for initialization is all gateways are trusted.
OBJECT-TYPE    
  SEQUENCE OF  
    RRipTrustEntry

rRipTrustEntry 1.3.6.1.4.1.22.6.1.8.1
The list of fields needed to support the rRipTrustTable.
OBJECT-TYPE    
  RRipTrustEntry  

rTrRestGw 1.3.6.1.4.1.22.6.1.8.1.1
The IP address of the gateway being restricted.
OBJECT-TYPE    
  NetworkAddress  

rTrRestState 1.3.6.1.4.1.22.6.1.8.1.2
The state of this entry. To add an entry to the list, set this field to ACTIVE. To remove an entry from the table, simply set this field to INACTIVE.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

rRipLsnIndTable 1.3.6.1.4.1.22.6.1.9
The rRipLsnIndTable contains the flags that indicate the type of listen restriction that is active for a given destination address.
OBJECT-TYPE    
  SEQUENCE OF  
    RRipLsnIndEntry

rRipLsnIndEntry 1.3.6.1.4.1.22.6.1.9.1
The variables needed to maintain an entry in the rRipLsnIndTable.
OBJECT-TYPE    
  RRipLsnIndEntry  

rRipLsnIndDest 1.3.6.1.4.1.22.6.1.9.1.1
The restricted destination address. For the LISTEN list this address will be the address of a gateway on a locally attached (sub)network. For the DO-NOT-LISTEN list this address will be a locally attached (sub)network.
OBJECT-TYPE    
  NetworkAddress  

rRipLsnType 1.3.6.1.4.1.22.6.1.9.1.2
Indicates whether the restricted list for this destination is a LISTEN list or a DO-NOT-LISTEN list. When the restriction indicator is changed, the associated LISTEN/DO-NOT-LISTEN list is removed. This field is the validation field to add/delete an entry in this table.
OBJECT-TYPE    
  INTEGER off(2), listen(3), do-not-listen(4)  

rRipLsnTable 1.3.6.1.4.1.22.6.1.10
Setting this table causes RIP to select inbound update information about a specific network or host. This table allows the network administrator to limit RIP's scope for inbound processing. Outbound processing is not affected by this table. If the rRipLsnType for this destination is set to LISTEN, RIP will use updates received from the specified gateways only. If the rRipLsnType is set to DO-NOT-LISTEN, RIP will discard updates received from the specified gateways and process all others. If the value of rRipLsnType is changed, this table is cleared. This table is maintained on a per destination basis. If the table is empty, it is assumed that all gateways are LISTEN for all destination addresses. This is also the default setting. To change the state of an entry in this table from LISTEN to DO-NOT-LISTEN or vice versa, change the rRipLsnType for the destination address and then define the new restriction list for that address.
OBJECT-TYPE    
  SEQUENCE OF  
    RRipLsnEntry

rRipLsnEntry 1.3.6.1.4.1.22.6.1.10.1
The list of fields needed to support the rRipLsnTable.
OBJECT-TYPE    
  RRipLsnEntry  

rLsnAddr 1.3.6.1.4.1.22.6.1.10.1.1
The destination address being restricted by this command.
OBJECT-TYPE    
  NetworkAddress  

rLsnRstAddr 1.3.6.1.4.1.22.6.1.10.1.2
The IP address of the gateway/network being restricted.
OBJECT-TYPE    
  NetworkAddress  

rLsnRstState 1.3.6.1.4.1.22.6.1.10.1.3
The state of this entry. To remove an entry from the table, set this field to INACTIVE. To add an item to this table set the state to ACTIVE. However, please note that before entries be added to this list it must have a corresponding entry in the rRipLsnIndTable.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

rRipAnncIndTable 1.3.6.1.4.1.22.6.1.11
The rRipAnncIndTable contains the flags that indicate the type of announce restriction(s) that are active for each (sub)network supported by the unit. Please note that before any entries can be defined here or in the rRipAnncTable, the (sub)network must be defined to the router via an ipAddrEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    RRipAnncIndEntry

rRipAnncIndEntry 1.3.6.1.4.1.22.6.1.11.1
The variables needed to maintain an entry in the rRipAnncIndTable.
OBJECT-TYPE    
  RRipAnncIndEntry  

rRipAnncIndNet 1.3.6.1.4.1.22.6.1.11.1.1
The IP address this unit recognizes on the (sub)network being restricted.
OBJECT-TYPE    
  NetworkAddress  

rRipAnncType 1.3.6.1.4.1.22.6.1.11.1.2
Indicates whether this (sub)network has an ANNOUNCE list, a DO-NOT-ANNOUNCE list or if the restriction is shut OFF. When the restriction indicator is changed, the associated ANNOUNCE/DO-NOT-ANNOUNCE list is removed.
OBJECT-TYPE    
  INTEGER off(2), announce(3), do-not-announce(4)  

rRipAnncTable 1.3.6.1.4.1.22.6.1.12
Setting this table causes RIP to taylor its update announcements. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. If the rRipAnncType is set to ANNOUNCE, RIP will adjust its outbound announcments on the indicated (sub)network by propogating announcements for those gateways listed in the rRipAnncTable only. All announcements for gateways not on the ANNOUNCE list will not be sent over the associated (sub)network. If the rRipAnncType is set to DO-NOT-ANNOUNCE, RIP will adjust its outbound announcements on the indicated (sub)network by not propogating announcements for those gateways listed in the rRipAnncTable. All other announcements will be propogated on the indicated (sub)network. If the value of ripAnncType is changed, this table is cleared. This table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways on all (sub)networks are ANNOUNCE. This is also the default state. To change the state of an entry from ANNOUNCE to DO-NOT-ANNOUNCE or vice versa, change the rRipAnncType in the ripAnncIndTable for the (sub)network and then define the new restriction list for the (sub)network. Please note that before any entries can be defined here or in the rRipAnncIndTable, the (sub)network must be defined to the router via an ipAddrEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    RRipAnncEntry

rRipAnncEntry 1.3.6.1.4.1.22.6.1.12.1
The list of fields needed to support the rRipAnncTable.
OBJECT-TYPE    
  RRipAnncEntry  

rAnncNet 1.3.6.1.4.1.22.6.1.12.1.1
The IP address this unit recognizes on the (sub)network being restricted.
OBJECT-TYPE    
  NetworkAddress  

rAnncDestAddr 1.3.6.1.4.1.22.6.1.12.1.2
The IP address of the gateway being restricted.
OBJECT-TYPE    
  NetworkAddress  

rAnncRstState 1.3.6.1.4.1.22.6.1.12.1.3
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

rRipSrcTable 1.3.6.1.4.1.22.6.1.13
Setting this table causes RIP broadcasting to be shut off by indicating which gateways should receive directed RIP information. No broadcast RIP update massages will be sent on the specified network. This table allows the network administrator to limit RIP's scope for outbound processing. Inbound processing is not affected by this table. As stated above, this table is maintained on a per (sub)network basis. If the table is empty, it is assumed that all gateways are to receive updates, i.e. broadcast is turned on. The default is broadcast all updates on all (sub)networks. Please note that before any entries can be defined here, the (sub)network must be defined to the router via an ipAddrEntry.
OBJECT-TYPE    
  SEQUENCE OF  
    RRipSrcEntry

rRipSrcEntry 1.3.6.1.4.1.22.6.1.13.1
The list of fields needed to support the rRipSrcTable.
OBJECT-TYPE    
  RRipSrcEntry  

rSrcAddr 1.3.6.1.4.1.22.6.1.13.1.1
The IP address this unit recognizes on the (sub)network being restricted.
OBJECT-TYPE    
  NetworkAddress  

rSrcRstGw 1.3.6.1.4.1.22.6.1.13.1.2
The IP address of the gateway being restricted.
OBJECT-TYPE    
  NetworkAddress  

rSrcRstState 1.3.6.1.4.1.22.6.1.13.1.3
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

rIpRtEvTable 1.3.6.1.4.1.22.6.1.14
Table containing the status of each routing event supported in the brouter.
OBJECT-TYPE    
  SEQUENCE OF  
    RIpRtEvEntry

rIpRtEvEntry 1.3.6.1.4.1.22.6.1.14.1
The entry containing the status of a specific routing event.
OBJECT-TYPE    
  RIpRtEvEntry  

rRtEvTskId 1.3.6.1.4.1.22.6.1.14.1.1
The task id of the reporting entity.
OBJECT-TYPE    
  INTEGER  

rRtEvCode 1.3.6.1.4.1.22.6.1.14.1.2
The event id assigned to the specific routing event.
OBJECT-TYPE    
  INTEGER  

rRtEvStatus 1.3.6.1.4.1.22.6.1.14.1.3
Status of this routing event.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

rIpRipStats 1.3.6.1.4.1.22.6.1.15
OBJECT IDENTIFIER    

rRipTotRef 1.3.6.1.4.1.22.6.1.15.1
Total number of RIP lookups.
OBJECT-TYPE    
  Counter  

rRipTotFnd 1.3.6.1.4.1.22.6.1.15.2
Number of times when routing destination was found.
OBJECT-TYPE    
  Counter  

rRipUdpRcv 1.3.6.1.4.1.22.6.1.15.3
Number of received RIP responses.
OBJECT-TYPE    
  Counter  

rRipUdpXmt 1.3.6.1.4.1.22.6.1.15.4
Number of transmitted RIP responses.
OBJECT-TYPE    
  Counter  

rRipUdpTrig 1.3.6.1.4.1.22.6.1.15.5
Total number of triggered RIP updates.
OBJECT-TYPE    
  Counter  

rRipReqRcv 1.3.6.1.4.1.22.6.1.15.6
Number of received RIP requests.
OBJECT-TYPE    
  Counter  

rRipReqXmt 1.3.6.1.4.1.22.6.1.15.7
Number of transmitted RIP requests.
OBJECT-TYPE    
  Counter  

rRipInvRcv 1.3.6.1.4.1.22.6.1.15.8
Number of invalid RIP messages received.
OBJECT-TYPE    
  Counter  

rIpArpStats 1.3.6.1.4.1.22.6.1.16
OBJECT IDENTIFIER    

rArpInMsgs 1.3.6.1.4.1.22.6.1.16.1
The total number of ARP messages which the entity received. Note that this counter includes all those counted by 'Inbound Errors'.
OBJECT-TYPE    
  Counter  

rArpInErr 1.3.6.1.4.1.22.6.1.16.2
The number of ARP messages which the entity received but determined as having errors (bad ARP opcode, bad protocol, bad hardware type).
OBJECT-TYPE    
  Counter  

rArpInIll 1.3.6.1.4.1.22.6.1.16.3
The number of illegal ARP messages received: Target Protocol Address (tpa) and Sender Protocol Address (spa) belongs to different networks, tpa, spa are illegal, tpa is broadcast etc.
OBJECT-TYPE    
  Counter  

rArpInOpCd 1.3.6.1.4.1.22.6.1.16.4
The number of ARP messages received, with bad opcode. Neither request nor reply.
OBJECT-TYPE    
  Counter  

rArpInReq 1.3.6.1.4.1.22.6.1.16.5
The number of ARP Request messages received.
OBJECT-TYPE    
  Counter  

rArpInRep 1.3.6.1.4.1.22.6.1.16.6
The number of ARP Reply messages received.
OBJECT-TYPE    
  Counter  

rArpInNotMe 1.3.6.1.4.1.22.6.1.16.7
The number of ARP Requests 'Not For Me messages' received.
OBJECT-TYPE    
  Counter  

rArpOutMsgs 1.3.6.1.4.1.22.6.1.16.8
The total number of ARP messages which this entity attempted to send. Note that this counter includes all those counted by 'Outbound Errors'.
OBJECT-TYPE    
  Counter  

rArpOutErr 1.3.6.1.4.1.22.6.1.16.9
The number of ARP messages which this entity did not send due to problems discovered within ARP such as a lack of buffers. This value should not include errors discovered outside the ARP layer such as the inability of the data link layer to send the message.
OBJECT-TYPE    
  Counter  

rArpOutReq 1.3.6.1.4.1.22.6.1.16.10
The number of ARP Request messages sent.
OBJECT-TYPE    
  Counter  

rArpOutRep 1.3.6.1.4.1.22.6.1.16.11
The number of ARP Reply messages sent.
OBJECT-TYPE    
  Counter  

rArpResReq 1.3.6.1.4.1.22.6.1.16.12
The number of resolve requests to this entity made by an upper level protocol.
OBJECT-TYPE    
  Counter  

rIpPArp 1.3.6.1.4.1.22.6.1.17
OBJECT IDENTIFIER    

rPArpInRep 1.3.6.1.4.1.22.6.1.17.1
The number of ARP replies recognized as a reply to a previous arp-request issued by proxy arp.
OBJECT-TYPE    
  Counter  

rPArpInReqSrch 1.3.6.1.4.1.22.6.1.17.2
The number of ARP requests recognized as 'naive request' that were put on the Proxy Search List.
OBJECT-TYPE    
  Counter  

rPArpOutReq 1.3.6.1.4.1.22.6.1.17.3
The number of ARP request sent on behalf of another host by proxy arp.
OBJECT-TYPE    
  Counter  

rPArpOutRep 1.3.6.1.4.1.22.6.1.17.4
The number of ARP replies sent by proxy arp, back to a naive host, as a result of passive proxy (the sought host was in the table).
OBJECT-TYPE    
  Counter  

rPArpOutActRep 1.3.6.1.4.1.22.6.1.17.5
The number of ARP replies sent by proxy arp, back to a naive host, as the result of an active proxy search.
OBJECT-TYPE    
  Counter  

rPArpToutSrch 1.3.6.1.4.1.22.6.1.17.6
The number of entries that were timed out from proxy arp search list (these entries got no reply during the proxy life-time interval).
OBJECT-TYPE    
  Counter  

rPArpNaiveReq 1.3.6.1.4.1.22.6.1.17.7
The number of ARP requests recognized as 'naive request' and to be handled by proxy arp mechanism. (A 'naive host' is a host with no subnetting knowledge.)
OBJECT-TYPE    
  Counter  

propIpPerm 1.3.6.1.4.1.22.6.2
OBJECT IDENTIFIER    

pIpMaskTable 1.3.6.1.4.1.22.6.2.1
The permanent list of address masks used by this router to initialize it's rIpMaskTable.
OBJECT-TYPE    
  SEQUENCE OF  
    PIpMaskEntry

pIpMaskEntry 1.3.6.1.4.1.22.6.2.1.1
Items contained in the permanent Address Mask Table.
OBJECT-TYPE    
  PIpMaskEntry  

pMaskNet 1.3.6.1.4.1.22.6.2.1.1.1
The IP network this mask is defined for.
OBJECT-TYPE    
  NetworkAddress  

pMask 1.3.6.1.4.1.22.6.2.1.1.2
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  NetworkAddress  

pMaskState 1.3.6.1.4.1.22.6.2.1.1.3
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

pIpOurAddrTable 1.3.6.1.4.1.22.6.2.2
The permanent list of parameters used by this router to initialize its ipAddrTable as well as the extention table rIpOurAddrTable.
OBJECT-TYPE    
  SEQUENCE OF  
    PIpOurAddrEntry

pIpOurAddrEntry 1.3.6.1.4.1.22.6.2.2.1
Objects required for a single entry in the pIpOurAddrTable. To add a pIpOurAddrEntry to the pIpOurAddrTable, the pAddrState is the validating item. Therefore, pAddrState must be the last item in the message when adding an entry. To add to the pIpOurAddrTable the agent requires all 7 items listed below. There are 3 default values provided by the agent for this entry: pAddrBcAddr defaults to -1, pAddrDbcast defaults to 'no directed broadcast' and pAddrRipMetric defaults to 1. To remove an pIpOurAddrEntry, the pAddrState should be set to INACTIVE.
OBJECT-TYPE    
  PIpOurAddrEntry  

pAddrOurAddr 1.3.6.1.4.1.22.6.2.2.1.1
The IP Address being defined in this entry.
OBJECT-TYPE    
  NetworkAddress  

pAddrIfIndex 1.3.6.1.4.1.22.6.2.2.1.2
The interface this IP Address being defined on.
OBJECT-TYPE    
  INTEGER  

pAddrBcAddr 1.3.6.1.4.1.22.6.2.2.1.3
As defined in rfc1156. 'The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1.' The default value for this item is all-ones.
OBJECT-TYPE    
  INTEGER  

pAddrDbcast 1.3.6.1.4.1.22.6.2.2.1.4
Allows the user to set the directed broadcast parameter of an IP network. The default is 'no directed broadcast'.
OBJECT-TYPE    
  INTEGER  

pAddrRipMetric 1.3.6.1.4.1.22.6.2.2.1.5
A number from 1 to 15 used to calculate the metrics to given destinations, RIP will add this metric to metrics received from other RIP gateways on this (sub)network. In effect, this can be used to prioritize the (sub)network used for a destination reachable via more than one Brouter (sub)network. Default value is 1.
OBJECT-TYPE    
  INTEGER  

pAddrState 1.3.6.1.4.1.22.6.2.2.1.6
The state of this entry. To remove an entry from the table, simply set this field to INACTIVE.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

pAddrRipState 1.3.6.1.4.1.22.6.2.2.1.7
The state of RIP for this entry.
OBJECT-TYPE    
  INTEGER on(1), off(2), quiet(3)  

pIpIfTable 1.3.6.1.4.1.22.6.2.3
The permanent list of parameters used by this router to initialize its ifTable as well as the extention table rIpIfTable.
OBJECT-TYPE    
  SEQUENCE OF  
    PIpIfEntry

pIpIfEntry 1.3.6.1.4.1.22.6.2.3.1
Objects required for a single entry in the pIpIfEntry.
OBJECT-TYPE    
  PIpIfEntry  

pIfIndex 1.3.6.1.4.1.22.6.2.3.1.1
Interface ID that uniquely identifies this interface among all other interfaces in this brouter.
OBJECT-TYPE    
  INTEGER  

pIfType 1.3.6.1.4.1.22.6.2.3.1.2
Specifies the type of Physical and Data-Link layers. See rfc1156 for protocol codes.
OBJECT-TYPE    
  INTEGER  

pIfMtu 1.3.6.1.4.1.22.6.2.3.1.3
Maximum Transmission Unit size that is supported on this network. The largest value acceptable for Ethernet is 1500 and for FDDI is 4500.
OBJECT-TYPE    
  INTEGER  

pIfArpStat 1.3.6.1.4.1.22.6.2.3.1.4
Allows the user to turn ARP on and off for the interface.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pIfPArpStat 1.3.6.1.4.1.22.6.2.3.1.5
Allows the user to turn proxy ARP on and off for the interface.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pIfAdminStat 1.3.6.1.4.1.22.6.2.3.1.6
Specifies the desired initial state of the interface (i.e., should the interface be started without direction from the operator). See rfc1156 for state codes.
OBJECT-TYPE    
  INTEGER  

pIfBcMask 1.3.6.1.4.1.22.6.2.3.1.7
When set to ON, the brouter will broadcast its address mask on start up. When set to OFF, the brouter will not broadcast its address mask on start up.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pDftGw 1.3.6.1.4.1.22.6.2.4
The IP address of the permanent default gateway.
OBJECT-TYPE    
  NetworkAddress  

pIpDefaults 1.3.6.1.4.1.22.6.2.5
When this object is set to 1, the side effect will be to cause the unit to reset all the objects defined under the subtree propIpPerm to their default values. Reading this object has no meaning. The integer value 1 will be returned to a get or get-next request.
OBJECT-TYPE    
  INTEGER reset-defaults(1)  

propFddi 1.3.6.1.4.1.22.7
OBJECT IDENTIFIER    

fddiSmtChge 1.3.6.1.4.1.22.7.1
At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any SMT object in the system is set by the manager.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

fddiMacChge 1.3.6.1.4.1.22.7.2
At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any MAC object in the system is set by the manager.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

fddiPortChge 1.3.6.1.4.1.22.7.3
At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any PORT object in the system is set by the manager.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

fddiAttachChge 1.3.6.1.4.1.22.7.4
At system startup, this object is set to FALSE. The SNMP agent then sets this flag to TRUE when any ATTACHMENT object in the system is set by the manager.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

Defined Objects

RccEntry  
SEQUENCE    
  INTEGER as rccIndex  
  INTEGER as rccState  
  INTEGER as rccType  
  INTEGER as rccCost  
  INTEGER as rccBSize  
  INTEGER as rccHTimer  
  INTEGER as rccLine  

RbcEntry  
SEQUENCE    
  OCTET STRING as rbcDrout  
  INTEGER as rbcMrout  
  INTEGER as rbcRpri  

RCCntrEntry  
SEQUENCE    
  Counter as rCCntTePktsIn  
  Counter as rCCntOPktsOut  
  Counter as rCCntTrPktsIn  
  Counter as rCCntTrPktsOut  
  Counter as rCCntAdjDown  

RnAdjEnt  
SEQUENCE    
  OCTET STRING as rnAdjAddr  
  INTEGER as rnAdjState  
  INTEGER as rnAdjType  
  INTEGER as rnAdjCIdx  
  INTEGER as rnAdjBSize  
  INTEGER as rnAdjLTmr  
  INTEGER as rnAdjPri  

RnLvl1Ent  
SEQUENCE    
  OCTET STRING as rnLvl1Addr  
  INTEGER as rnLvl1Cidx  
  INTEGER as rnLvl1Cost  
  INTEGER as rnLvl1Hops  
  OCTET STRING as rnLvl1Next  

RaParmEntry  
SEQUENCE    
  INTEGER as raNum  
  INTEGER as raCIdx  
  INTEGER as raCost  
  INTEGER as raHops  
  OCTET STRING as raNext  

PccEntry  
SEQUENCE    
  INTEGER as pccIndex  
  INTEGER as pccState  
  INTEGER as pccCost  
  INTEGER as pccHTimer  

PbcEntry  
SEQUENCE    
  INTEGER as pbcMrout  
  INTEGER as pbcRpri  

RTrapAddrEntry  
SEQUENCE    
  NetworkAddress as rTrapAddrAddr  
  OCTET STRING as rTrapAddrComm  
  INTEGER as rTrapAddrVer  
  OCTET STRING as rTrapAddrType  
  INTEGER as rTrapAddrState  

PTrapAddrEntry  
SEQUENCE    
  NetworkAddress as pTrapAddrAddr  
  OCTET STRING as pTrapAddrComm  
  INTEGER as pTrapAddrVer  
  OCTET STRING as pTrapAddrType  
  INTEGER as pTrapAddrState  

RClParmEntry  
SEQUENCE    
  INTEGER as rClState  
  INTEGER as rClSubSt  

RBlParmEntry  
SEQUENCE    
  OCTET STRING as rBlHAddr  

RElCountEntry  
SEQUENCE    
  Counter as rElFrIn  
  Counter as rElFrOut  
  Counter as rElBcBin  
  Counter as rElBcFIn  
  Counter as rElMcBIn  
  Counter as rElMcFIn  
  Counter as rElFDef  
  Counter as rElF1Col  
  Counter as rElFMCol  
  Counter as rElOutF  
  Counter as rElCDetF  
  Counter as rElInF  
  Counter as rElBadD  
  Counter as rElOvRun  
  Counter as rElNoBuf  

RPingEntry  
SEQUENCE    
  INTEGER as rPProto  
  NetworkAddress as rPDest  
  INTEGER as rPTimeOut  
  INTEGER as rPReply  
  INTEGER as rPState  

RDebugEntry  
SEQUENCE    
  INTEGER as rDTaskId  
  INTEGER as rDDevStat  
  INTEGER as rDRunStat  

PUFlashEntry  
SEQUENCE    
  INTEGER as flashIndex  
  OCTET STRING as flashVersion  
  INTEGER as flashState  

RIpMaskEntry  
SEQUENCE    
  NetworkAddress as rMaskNet  
  NetworkAddress as rMask  
  INTEGER as rMaskState  

RIpOurAddrEntry  
SEQUENCE    
  INTEGER as rAddrDbcast  
  INTEGER as rAddrRipMetric  
  INTEGER as rAddrRipState  
  INTEGER as rAddrState  

RIpIfEntry  
SEQUENCE    
  INTEGER as rIfArpStat  
  INTEGER as rIfPArpStat  
  INTEGER as rIfBcMask  

RIpAtEntry  
SEQUENCE    
  INTEGER as rAtStatic  
  INTEGER as rAtAge  

RIpRtEntry  
SEQUENCE    
  INTEGER as rRtStatic  

RRipTrustEntry  
SEQUENCE    
  NetworkAddress as rTrRestGw  
  INTEGER as rTrRestState  

RRipLsnIndEntry  
SEQUENCE    
  NetworkAddress as rRipLsnIndDest  
  INTEGER as rRipLsnType  

RRipLsnEntry  
SEQUENCE    
  NetworkAddress as rLsnAddr  
  NetworkAddress as rLsnRstAddr  
  INTEGER as rLsnRstState  

RRipAnncIndEntry  
SEQUENCE    
  NetworkAddress as rRipAnncIndNet  
  INTEGER as rRipAnncType  

RRipAnncEntry  
SEQUENCE    
  NetworkAddress as rAnncNet  
  NetworkAddress as rAnncDestAddr  
  INTEGER as rAnncRstState  

RRipSrcEntry  
SEQUENCE    
  NetworkAddress as rSrcAddr  
  NetworkAddress as rSrcRstGw  
  INTEGER as rSrcRstState  

RIpRtEvEntry  
SEQUENCE    
  INTEGER as rRtEvTskId  
  INTEGER as rRtEvCode  
  INTEGER as rRtEvStatus  

PIpMaskEntry  
SEQUENCE    
  NetworkAddress as pMaskNet  
  NetworkAddress as pMask  
  INTEGER as pMaskState  

PIpOurAddrEntry  
SEQUENCE    
  NetworkAddress as pAddrOurAddr  
  INTEGER as pAddrIfIndex  
  INTEGER as pAddrBcAddr  
  INTEGER as pAddrDbcast  
  INTEGER as pAddrRipMetric  
  INTEGER as pAddrState  
  INTEGER as pAddrRipState  

PIpIfEntry  
SEQUENCE    
  INTEGER as pIfIndex  
  INTEGER as pIfType  
  INTEGER as pIfMtu  
  INTEGER as pIfArpStat  
  INTEGER as pIfPArpStat  
  INTEGER as pIfAdminStat  
  INTEGER as pIfBcMask