
| SNMPv2-SMI | SNMPv2-TC | FLARION-MIB |
| MODULE-IDENTITY | OBJECT-TYPE | NOTIFICATION-TYPE |
| IpAddress | TimeTicks | Unsigned32 |
| Counter32 | DisplayString | TruthValue |
| flarion | FloatAsString |
| rrUserInfo | 1.3.6.1.4.1.8603.4 | ||
| OBJECT IDENTIFIER | |||
| usrSiteInfo | 1.3.6.1.4.1.8603.4.1 | ||
| OBJECT IDENTIFIER | |||
| siteIdentity | 1.3.6.1.4.1.8603.4.1.1 | ||
| OBJECT IDENTIFIER | |||
| siteId | 1.3.6.1.4.1.8603.4.1.1.1 | ||
| The name given to the basestation by the wireless carrier. The siteId is controlled by the carrier. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteName | 1.3.6.1.4.1.8603.4.1.1.2 | ||
| The site name as chosen by the carrier. The name may be derived from the siteId or from the siteCity. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteOwner | 1.3.6.1.4.1.8603.4.1.1.3 | ||
| The owner of the basestation. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteInstallDate | 1.3.6.1.4.1.8603.4.1.1.4 | ||
| Date of installation of the basestation. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteCommissionDate | 1.3.6.1.4.1.8603.4.1.1.5 | ||
| Date of completing commissioning of the basestation. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteOtherInfo | 1.3.6.1.4.1.8603.4.1.1.6 | ||
| This field is reserved to store any information that the carrier chooses to use. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteLocation | 1.3.6.1.4.1.8603.4.1.2 | ||
| OBJECT IDENTIFIER | |||
| siteStreet | 1.3.6.1.4.1.8603.4.1.2.1 | ||
| Street address. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteCity | 1.3.6.1.4.1.8603.4.1.2.2 | ||
| City name. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteCounty | 1.3.6.1.4.1.8603.4.1.2.3 | ||
| County (if applicable). | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteState | 1.3.6.1.4.1.8603.4.1.2.4 | ||
| State (if applicable). | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| sitePostalLocation | 1.3.6.1.4.1.8603.4.1.2.5 | ||
| Zip code or postal code (if applicable). | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteCountry | 1.3.6.1.4.1.8603.4.1.2.6 | ||
| Country. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteLatitude | 1.3.6.1.4.1.8603.4.1.2.7 | ||
| The site angular distance north or south of the earth's equator, measured in degrees along a meridian. | |||
| OBJECT-TYPE | |||
| FloatAsString | |||
| siteLongitude | 1.3.6.1.4.1.8603.4.1.2.8 | ||
| The site angular distance on the earth's surface, measured east or west and expressed in degrees. | |||
| OBJECT-TYPE | |||
| FloatAsString | |||
| siteGroundElevation | 1.3.6.1.4.1.8603.4.1.2.9 | ||
| The ground elevation of the site, in feet. | |||
| OBJECT-TYPE | |||
| FloatAsString | |||
| siteRfEnv | 1.3.6.1.4.1.8603.4.1.3 | ||
| OBJECT IDENTIFIER | |||
| siteStructureType | 1.3.6.1.4.1.8603.4.1.3.1 | ||
| The method by which the antenna is mounted in the field. Possible options include monopole, flagpole, self support, water tank, etc. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteAntennaConfig | 1.3.6.1.4.1.8603.4.1.3.2 | ||
| Used to indicate if the basestation antennae are configured as: Sectorized - radiates RF energy in 1,2, or 3 sectors Omni - radiates RF power in all directions Simulcast Low Power - radiates RF energy to each antenna sector by splitting the carrier's signal output after the signal is amplified, thus requiring a single power amplifier Simulcast High Power - radiates the same information to each antenna sector by splitting the carrier's signal output prior to amplification, thus requiring multiple power amplifiers. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteNumSectors | 1.3.6.1.4.1.8603.4.1.3.3 | ||
| This parameter is used to indicate the number of sectors in the base station. Options are: 0 = omni 1 = one sector 2 = two sectors 3 = three sectors | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3 | ||
| siteConnectivity | 1.3.6.1.4.1.8603.4.1.4 | ||
| OBJECT IDENTIFIER | |||
| siteCluster | 1.3.6.1.4.1.8603.4.1.4.1 | ||
| For EMS management purposes, the network may be divided into clusters. This field identifies the cluster associated with the basestation. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| siteDomain | 1.3.6.1.4.1.8603.4.1.4.2 | ||
| The site domain is used with the siteId to form the hostname of the basestation. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| usrSectorInfo | 1.3.6.1.4.1.8603.4.2 | ||
| OBJECT IDENTIFIER | |||
| sectorAntennaTable | 1.3.6.1.4.1.8603.4.2.1 | ||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SectorAntennaEntry | |||
| sectorAntennaEntry | 1.3.6.1.4.1.8603.4.2.1.1 | ||
| OBJECT-TYPE | |||
| SectorAntennaEntry | |||
| secAntIndex | 1.3.6.1.4.1.8603.4.2.1.1.1 | ||
| Sector index. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| secAntName | 1.3.6.1.4.1.8603.4.2.1.1.2 | ||
| Sector name. For example, alpha, beta, gamme, omni. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| secAntMorphology | 1.3.6.1.4.1.8603.4.2.1.1.3 | ||
| An indication of the RF classification for the coverage area of the sector. Possible values include Rural, Dense Rural, Light Suburban, Suburban, Dense Suburban, Light Urban, Urban, and Dense Urban. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| secAntManufacturer | 1.3.6.1.4.1.8603.4.2.1.1.4 | ||
| Name of the manufacturer of the antenna used in this sector. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| secAntSharing | 1.3.6.1.4.1.8603.4.2.1.1.5 | ||
| Used to indicate and explain if the antenna is shared with other basestations or other technologies. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| secAntRxDiv | 1.3.6.1.4.1.8603.4.2.1.1.6 | ||
| Indicates if two antennae are used in order to obtain diversity. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| secAntSpatialDiv | 1.3.6.1.4.1.8603.4.2.1.1.7 | ||
| Indicates if antenna spatial diversity (two antennas physically separated) is used. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| secAntPolarDiv | 1.3.6.1.4.1.8603.4.2.1.1.8 | ||
| Indicates if antenna polarization diversity is used. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| secAntModel | 1.3.6.1.4.1.8603.4.2.1.1.9 | ||
| The model number of the antenna. | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| sectorAntennaCharTable | 1.3.6.1.4.1.8603.4.2.2 | ||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SectorAntennaCharEntry | |||
| sectorAntennaCharEntry | 1.3.6.1.4.1.8603.4.2.2.1 | ||
| OBJECT-TYPE | |||
| SectorAntennaCharEntry | |||
| secAntCharIndex | 1.3.6.1.4.1.8603.4.2.2.1.1 | ||
| Sector index. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| secAntCharGain | 1.3.6.1.4.1.8603.4.2.2.1.2 | ||
| The antenna gain in dBd (a measure of how well the antenna will send or pick up a radio signal compared to a dipole antenna). Valid values are 0 to 100. | |||
| OBJECT-TYPE | |||
| FloatAsString | |||
| secAntCharHorizontalBw | 1.3.6.1.4.1.8603.4.2.2.1.3 | ||
| An indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the horizontal plane. This value is used along with sectorAntennaVerticalBw in propagation tools to mask the path-loss and model coverage area. Valid values are 0 to 360. | |||
| OBJECT-TYPE | |||
| FloatAsString | |||
| secAntCharVertcalBw | 1.3.6.1.4.1.8603.4.2.2.1.4 | ||
| An indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the vertical plane. This value is used along with sectorAntennaHorizontalBw in propagation tools to mask the path-loss and model coverage area. Valid values are 0 to 180. | |||
| OBJECT-TYPE | |||
| FloatAsString | |||
| secAntCharRadOnCenter | 1.3.6.1.4.1.8603.4.2.2.1.5 | ||
| This is a measurement of the antenna center line mounting height, in feet Above Ground Level (AGL). | |||
| OBJECT-TYPE | |||
| INTEGER | 1..1000 | ||
| secAntCharAzimuth | 1.3.6.1.4.1.8603.4.2.2.1.6 | ||
| This is a measure of the antenna main-beam orientation with respect to true north in the horizontal plane. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..359 | ||
| secAntCharMechanicalTilt | 1.3.6.1.4.1.8603.4.2.2.1.7 | ||
| This is a measure of the physical mounting of the antenna with respect to plumb (vertical). This value indicates values relative to plumb which is assumed to be 0 degrees. Negative values would indicate up-tilt, which is occasionally done to adjust for excessive electrical tilt. | |||
| OBJECT-TYPE | |||
| INTEGER | -20..90 | ||
| secAntCharElectricalTilt | 1.3.6.1.4.1.8603.4.2.2.1.8 | ||
| A measure of the down-tilt designed into the antenna pattern. This is typically measured relative to a point at 90 degrees to a plumb back plane in the main beam of the antenna. These values may be fixed of variable for a given antenna model. | |||
| OBJECT-TYPE | |||
| INTEGER | -20..90 | ||
| sectorLnaTable | 1.3.6.1.4.1.8603.4.2.3 | ||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| SectorLnaEntry | |||
| sectorLnaEntry | 1.3.6.1.4.1.8603.4.2.3.1 | ||
| OBJECT-TYPE | |||
| SectorLnaEntry | |||
| secLnaIndex | 1.3.6.1.4.1.8603.4.2.3.1.1 | ||
| Sector index. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| secLnaFilterType | 1.3.6.1.4.1.8603.4.2.3.1.2 | ||
| This parameter indicated the type of filter used in the LNA/Duplexer unit. It can be simplex (receive only, or duplex for transmit and receive). | |||
| OBJECT-TYPE | |||
| DisplayString | |||
| secLnaTowerTop | 1.3.6.1.4.1.8603.4.2.3.1.3 | ||
| Indicates if the LNA is a tower-top mounted type. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| SectorAntennaEntry | |||
| SEQUENCE | |||
| INTEGER as secAntIndex | |||
| DisplayString as secAntName | |||
| DisplayString as secAntMorphology | |||
| DisplayString as secAntManufacturer | |||
| DisplayString as secAntSharing | |||
| TruthValue as secAntRxDiv | |||
| TruthValue as secAntSpatialDiv | |||
| TruthValue as secAntPolarDiv | |||
| DisplayString as secAntModel | |||
| SectorAntennaCharEntry | |||
| SEQUENCE | |||
| INTEGER as secAntCharIndex | |||
| FloatAsString as secAntCharGain | |||
| FloatAsString as secAntCharHorizontalBw | |||
| FloatAsString as secAntCharVertcalBw | |||
| INTEGER as secAntCharRadOnCenter | |||
| INTEGER as secAntCharAzimuth | |||
| INTEGER as secAntCharMechanicalTilt | |||
| INTEGER as secAntCharElectricalTilt | |||
| SectorLnaEntry | |||
| SEQUENCE | |||
| INTEGER as secLnaIndex | |||
| DisplayString as secLnaFilterType | |||
| TruthValue as secLnaTowerTop | |||