FOUNDRY-SN-IP-VRRP-MIB

File: FOUNDRY-SN-IP-VRRP-MIB.mib (39590 bytes)

Imported modules

RFC1155-SMI RFC-1212 IF-MIB
FOUNDRY-SN-ROOT-MIB

Imported symbols

IpAddress Counter OBJECT-TYPE
ifIndex snVrrp

Defined Objects

snVrrpGlobal 1.3.6.1.4.1.1991.1.2.12.1
OBJECT IDENTIFIER    

snVrrpGroupOperMode 1.3.6.1.4.1.1991.1.2.12.1.1
The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activate VRRP
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpIfStateChangeTrap 1.3.6.1.4.1.1991.1.2.12.1.2
Indicates whether the SNMP agent process is permitted to generate vrrp and vrrpe interface state change traps.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpIfMaxNumVridPerIntf 1.3.6.1.4.1.1991.1.2.12.1.3
Indicates the maximum number of VRID per interface.
OBJECT-TYPE    
  INTEGER  

snVrrpIfMaxNumVridPerSystem 1.3.6.1.4.1.1991.1.2.12.1.4
Indicates the maximum number of VRID per system.
OBJECT-TYPE    
  INTEGER  

snVrrpClearVrrpStat 1.3.6.1.4.1.1991.1.2.12.1.5
Clear VRRP statistics command.
OBJECT-TYPE    
  INTEGER normal(0), clear(1)  

snVrrpGroupOperModeVrrpextended 1.3.6.1.4.1.1991.1.2.12.1.6
The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP extended enabled(1)...........activate VRRP extended
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpIntf 1.3.6.1.4.1.1991.1.2.12.2
OBJECT IDENTIFIER    

snVrrpIfTable 1.3.6.1.4.1.1991.1.2.12.2.1
The VRRP Interface Table describes the interfaces from the viewpoint of VRRP.
OBJECT-TYPE    
  SEQUENCE OF  
    SnVrrpIfEntry

snVrrpIfEntry 1.3.6.1.4.1.1991.1.2.12.2.1.1
The VRRP Interface Entry describes one interface from the viewpoint of VRRP.
OBJECT-TYPE    
  SnVrrpIfEntry  

snVrrpIfPort 1.3.6.1.4.1.1991.1.2.12.2.1.1.1
The IP port of this VRRP interface.
OBJECT-TYPE    
  INTEGER  

snVrrpIfAuthType 1.3.6.1.4.1.1991.1.2.12.2.1.1.2
The authentication type of this interface.
OBJECT-TYPE    
  INTEGER noAuth(0), simpleTextPasswd(1), ipAuthHeader(2)  

snVrrpIfAuthPassword 1.3.6.1.4.1.1991.1.2.12.2.1.1.3
The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1).
OBJECT-TYPE    
  OCTET STRING SIZE(0..8)  

snVrrpIfRxHeaderErrCnts 1.3.6.1.4.1.1991.1.2.12.2.1.1.4
The received Header error counts in this interface.
OBJECT-TYPE    
  Counter  

snVrrpIfRxAuthTypeErrCnts 1.3.6.1.4.1.1991.1.2.12.2.1.1.5
The received authentication type error counts in this interface.
OBJECT-TYPE    
  Counter  

snVrrpIfRxAuthPwdMismatchErrCnts 1.3.6.1.4.1.1991.1.2.12.2.1.1.6
The received authentication password mismatched error counts in this interface.
OBJECT-TYPE    
  Counter  

snVrrpIfRxVridErrCnts 1.3.6.1.4.1.1991.1.2.12.2.1.1.7
The received unfound VRID error counts in this interface.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr 1.3.6.1.4.1.1991.1.2.12.3
OBJECT IDENTIFIER    

snVrrpVirRtrTable 1.3.6.1.4.1.1991.1.2.12.3.1
The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
OBJECT-TYPE    
  SEQUENCE OF  
    SnVrrpVirRtrEntry

snVrrpVirRtrEntry 1.3.6.1.4.1.1991.1.2.12.3.1.1
The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
OBJECT-TYPE    
  SnVrrpVirRtrEntry  

snVrrpVirRtrPort 1.3.6.1.4.1.1991.1.2.12.3.1.1.1
The IP port of this VRRP interface.
OBJECT-TYPE    
  INTEGER  

snVrrpVirRtrId 1.3.6.1.4.1.1991.1.2.12.3.1.1.2
One of the virtual router ID of this VRRP interface.
OBJECT-TYPE    
  INTEGER 1..255  

snVrrpVirRtrOwnership 1.3.6.1.4.1.1991.1.2.12.3.1.1.3
The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface.
OBJECT-TYPE    
  INTEGER incomplete(0), owner(1), backup(2)  

snVrrpVirRtrCfgPriority 1.3.6.1.4.1.1991.1.2.12.3.1.1.4
The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVrrpVirRtrOwnership is set to backup(2).
OBJECT-TYPE    
  INTEGER 3..254  

snVrrpVirRtrTrackPriority 1.3.6.1.4.1.1991.1.2.12.3.1.1.5
The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN.
OBJECT-TYPE    
  INTEGER 1..254  

snVrrpVirRtrCurrPriority 1.3.6.1.4.1.1991.1.2.12.3.1.1.6
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
OBJECT-TYPE    
  INTEGER 1..254  

snVrrpVirRtrHelloInt 1.3.6.1.4.1.1991.1.2.12.3.1.1.7
Time interval between advertisements (seconds).
OBJECT-TYPE    
  INTEGER 1..84  

snVrrpVirRtrDeadInt 1.3.6.1.4.1.1991.1.2.12.3.1.1.8
Dead interval (seconds).
OBJECT-TYPE    
  INTEGER 1..84  

snVrrpVirRtrPreemptMode 1.3.6.1.4.1.1991.1.2.12.3.1.1.9
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpVirRtrState 1.3.6.1.4.1.1991.1.2.12.3.1.1.10
This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
OBJECT-TYPE    
  INTEGER init(0), master(1), backup(2)  

snVrrpVirRtrActivate 1.3.6.1.4.1.1991.1.2.12.3.1.1.11
This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpVirRtrIpAddrMask 1.3.6.1.4.1.1991.1.2.12.3.1.1.12
The numbers of IP Addresses of this virtual router of this interface.
OBJECT-TYPE    
  OCTET STRING SIZE(64)  

snVrrpVirRtrTrackPortMask 1.3.6.1.4.1.1991.1.2.12.3.1.1.13
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)
OBJECT-TYPE    
  OCTET STRING SIZE(4..32)  

snVrrpVirRtrTrackVifMask 1.3.6.1.4.1.1991.1.2.12.3.1.1.14
This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)
OBJECT-TYPE    
  OCTET STRING SIZE(4..512)  

snVrrpVirRtrRowStatus 1.3.6.1.4.1.1991.1.2.12.3.1.1.15
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snVrrpVirRtrRxArpPktDropCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.16
The received VRRP ARP Packet Drop Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxIpPktDropCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.17
The received VRRP IP Packet Drop Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxPortMismatchCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.18
The received VRRP Port mismatching Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxNumOfIpMismatchCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.19
The received VRRP Number of IP Addresses mismatching Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxIpMismatchCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.20
The received VRRP IP Address mismatching Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxHelloIntMismatchCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.21
The counts of the virtual router interface with hello interval mismatch counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxPriorityZeroFromMasterCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.22
The counts of the virtual router interface with Priority zero from the master.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrRxHigherPriorityCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.23
The counts of the virtual router interface with higher Priority.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrTransToMasterStateCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.24
The counts of the virtual router interface transition to master state.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrTransToBackupStateCnts 1.3.6.1.4.1.1991.1.2.12.3.1.1.25
The counts of the virtual router interface transition to backup state.
OBJECT-TYPE    
  Counter  

snVrrpVirRtrCurrDeadInt 1.3.6.1.4.1.1991.1.2.12.3.1.1.26
Current Dead interval (in 100 milliseconds).
OBJECT-TYPE    
  INTEGER  

snVrrpVirRtrTrackPortList 1.3.6.1.4.1.1991.1.2.12.3.1.1.27
This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP physical track port membership.
OBJECT-TYPE    
  OCTET STRING  

snVrrpVirRtrTrackVifPortList 1.3.6.1.4.1.1991.1.2.12.3.1.1.28
This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP virtual port track membership.
OBJECT-TYPE    
  OCTET STRING  

snVrrpIntf2 1.3.6.1.4.1.1991.1.2.12.4
OBJECT IDENTIFIER    

snVrrpIf2Table 1.3.6.1.4.1.1991.1.2.12.4.1
The VRRP and VRRPE Interface Table describes the interfaces from the viewpoint of VRRP and VRRPE.
OBJECT-TYPE    
  SEQUENCE OF  
    SnVrrpIf2Entry

snVrrpIf2Entry 1.3.6.1.4.1.1991.1.2.12.4.1.1
The VRRP and VRRPE Interface Entry describes one interface from the viewpoint of VRRP and VRRPE.
OBJECT-TYPE    
  SnVrrpIf2Entry  

snVrrpIf2AuthType 1.3.6.1.4.1.1991.1.2.12.4.1.1.1
The authentication type of this interface.
OBJECT-TYPE    
  INTEGER noAuth(0), simpleTextPasswd(1), ipAuthHeader(2)  

snVrrpIf2AuthPassword 1.3.6.1.4.1.1991.1.2.12.4.1.1.2
The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1).
OBJECT-TYPE    
  OCTET STRING SIZE(0..8)  

snVrrpIf2RxHeaderErrCnts 1.3.6.1.4.1.1991.1.2.12.4.1.1.3
The received Header error counts in this interface.
OBJECT-TYPE    
  Counter  

snVrrpIf2RxAuthTypeErrCnts 1.3.6.1.4.1.1991.1.2.12.4.1.1.4
The received authentication type error counts in this interface.
OBJECT-TYPE    
  Counter  

snVrrpIf2RxAuthPwdMismatchErrCnts 1.3.6.1.4.1.1991.1.2.12.4.1.1.5
The received authentication password mismatched error counts in this interface.
OBJECT-TYPE    
  Counter  

snVrrpIf2RxVridErrCnts 1.3.6.1.4.1.1991.1.2.12.4.1.1.6
The received unfound VRID error counts in this interface.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2 1.3.6.1.4.1.1991.1.2.12.5
OBJECT IDENTIFIER    

snVrrpVirRtr2Table 1.3.6.1.4.1.1991.1.2.12.5.1
The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe.
OBJECT-TYPE    
  SEQUENCE OF  
    SnVrrpVirRtr2Entry

snVrrpVirRtr2Entry 1.3.6.1.4.1.1991.1.2.12.5.1.1
The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe.
OBJECT-TYPE    
  SnVrrpVirRtr2Entry  

snVrrpVirRtr2Id 1.3.6.1.4.1.1991.1.2.12.5.1.1.1
One of the virtual router ID of this Vrrp and Vrrpe interface.
OBJECT-TYPE    
  INTEGER 1..255  

snVrrpVirRtr2Ownership 1.3.6.1.4.1.1991.1.2.12.5.1.1.2
The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this Vrrp router interface. vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0).
OBJECT-TYPE    
  INTEGER incomplete(0), owner(1), backup(2)  

snVrrpVirRtr2CfgPriority 1.3.6.1.4.1.1991.1.2.12.5.1.1.3
This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is only for VRRP - owner. Not valid for number to configure VRRPE.
OBJECT-TYPE    
  INTEGER 0..255  

snVrrpVirRtr2TrackPriority 1.3.6.1.4.1.1991.1.2.12.5.1.1.4
The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN.
OBJECT-TYPE    
  INTEGER 1..254  

snVrrpVirRtr2CurrPriority 1.3.6.1.4.1.1991.1.2.12.5.1.1.5
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
OBJECT-TYPE    
  INTEGER 1..254  

snVrrpVirRtr2HelloInt 1.3.6.1.4.1.1991.1.2.12.5.1.1.6
Time interval between advertisements (seconds).
OBJECT-TYPE    
  INTEGER 1..84  

snVrrpVirRtr2DeadInt 1.3.6.1.4.1.1991.1.2.12.5.1.1.7
Dead interval (seconds).
OBJECT-TYPE    
  INTEGER 0..84  

snVrrpVirRtr2PreemptMode 1.3.6.1.4.1.1991.1.2.12.5.1.1.8
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpVirRtr2State 1.3.6.1.4.1.1991.1.2.12.5.1.1.9
This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
OBJECT-TYPE    
  INTEGER init(0), master(1), backup(2)  

snVrrpVirRtr2IpAddrMask 1.3.6.1.4.1.1991.1.2.12.5.1.1.10
The numbers of IP Addresses of this virtual router of this interface.
OBJECT-TYPE    
  OCTET STRING SIZE(4..64)  

snVrrpVirRtr2Activate 1.3.6.1.4.1.1991.1.2.12.5.1.1.11
This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe Routers.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpVirRtr2BackupInt 1.3.6.1.4.1.1991.1.2.12.5.1.1.12
Time interval between backup routers hello message advertisements (seconds).
OBJECT-TYPE    
  INTEGER 60..3600  

snVrrpVirRtr2RowStatus 1.3.6.1.4.1.1991.1.2.12.5.1.1.13
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snVrrpVirRtr2RxArpPktDropCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.14
The received Vrrp and Vrrpe ARP Packet Drop Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2RxIpPktDropCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.15
The received Vrrp and Vrrpe IP Packet Drop Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2RxPortMismatchCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.16
The received Vrrp and Vrrpe Port mismatching Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2RxNumOfIpMismatchCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.17
The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2RxIpMismatchCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.18
The received Vrrp and Vrrpe IP Address mismatching Counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2RxHelloIntMismatchCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.19
The counts of the virtual router interface with hello interval mismatch counts.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2RxPriorityZeroFromMasterCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.20
The counts of the virtual router interface with Priority zero from the master.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2RxHigherPriorityCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.21
The counts of the virtual router interface with higher Priority.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2TransToMasterStateCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.22
The counts of the virtual router interface transition to master state.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2TransToBackupStateCnts 1.3.6.1.4.1.1991.1.2.12.5.1.1.23
The counts of the virtual router interface transition to backup state.
OBJECT-TYPE    
  Counter  

snVrrpVirRtr2CurrDeadInt 1.3.6.1.4.1.1991.1.2.12.5.1.1.24
Current Dead interval (in 100 milliseconds).
OBJECT-TYPE    
  INTEGER  

snVrrpVirRtr2TrackPortList 1.3.6.1.4.1.1991.1.2.12.5.1.1.25
This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP and VRRP-E physical track port membership.
OBJECT-TYPE    
  OCTET STRING  

snVrrpVirRtr2AdvertiseBackup 1.3.6.1.4.1.1991.1.2.12.5.1.1.26
Set Advertise this backup router to master
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snVrrpVirRtr2MasterIpAddr 1.3.6.1.4.1.1991.1.2.12.5.1.1.27
The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtual router.
OBJECT-TYPE    
  IpAddress  

snVrrpVirRtr2IpAddrCount 1.3.6.1.4.1.1991.1.2.12.5.1.1.28
The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair.
OBJECT-TYPE    
  INTEGER 0..255  

snVrrpVirRtr2VirtualMacAddr 1.3.6.1.4.1.1991.1.2.12.5.1.1.29
The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps.
OBJECT-TYPE    
  MacAddress  

Defined Objects

MacAddress  
OCTET STRING SIZE(6)    

SnVrrpIfEntry  
SEQUENCE    
  INTEGER as snVrrpIfPort  
  INTEGER as snVrrpIfAuthType  
  OCTET STRING as snVrrpIfAuthPassword  
  Counter as snVrrpIfRxHeaderErrCnts  
  Counter as snVrrpIfRxAuthTypeErrCnts  
  Counter as snVrrpIfRxAuthPwdMismatchErrCnts  
  Counter as snVrrpIfRxVridErrCnts  

SnVrrpIf2Entry  
SEQUENCE    
  INTEGER as snVrrpIf2AuthType  
  OCTET STRING as snVrrpIf2AuthPassword  
  Counter as snVrrpIf2RxHeaderErrCnts  
  Counter as snVrrpIf2RxAuthTypeErrCnts  
  Counter as snVrrpIf2RxAuthPwdMismatchErrCnts  
  Counter as snVrrpIf2RxVridErrCnts  

SnVrrpVirRtrEntry  
SEQUENCE    
  INTEGER as snVrrpVirRtrPort  
  INTEGER as snVrrpVirRtrId  
  INTEGER as snVrrpVirRtrOwnership  
  INTEGER as snVrrpVirRtrCfgPriority  
  INTEGER as snVrrpVirRtrTrackPriority  
  INTEGER as snVrrpVirRtrCurrPriority  
  INTEGER as snVrrpVirRtrHelloInt  
  INTEGER as snVrrpVirRtrDeadInt  
  INTEGER as snVrrpVirRtrPreemptMode  
  INTEGER as snVrrpVirRtrState  
  INTEGER as snVrrpVirRtrActivate  
  OCTET STRING as snVrrpVirRtrIpAddrMask  
  OCTET STRING as snVrrpVirRtrTrackPortMask  
  OCTET STRING as snVrrpVirRtrTrackVifMask  
  INTEGER as snVrrpVirRtrRowStatus  
  Counter as snVrrpVirRtrRxArpPktDropCnts  
  Counter as snVrrpVirRtrRxIpPktDropCnts  
  Counter as snVrrpVirRtrRxPortMismatchCnts  
  Counter as snVrrpVirRtrRxNumOfIpMismatchCnts  
  Counter as snVrrpVirRtrRxIpMismatchCnts  
  Counter as snVrrpVirRtrRxHelloIntMismatchCnts  
  Counter as snVrrpVirRtrRxPriorityZeroFromMasterCnts  
  Counter as snVrrpVirRtrRxHigherPriorityCnts  
  Counter as snVrrpVirRtrTransToMasterStateCnts  
  Counter as snVrrpVirRtrTransToBackupStateCnts  
  INTEGER as snVrrpVirRtrCurrDeadInt  
  OCTET STRING as snVrrpVirRtrTrackPortList  
  OCTET STRING as snVrrpVirRtrTrackVifPortList  

SnVrrpVirRtr2Entry  
SEQUENCE    
  INTEGER as snVrrpVirRtr2Id  
  INTEGER as snVrrpVirRtr2Ownership  
  INTEGER as snVrrpVirRtr2CfgPriority  
  INTEGER as snVrrpVirRtr2TrackPriority  
  INTEGER as snVrrpVirRtr2CurrPriority  
  INTEGER as snVrrpVirRtr2HelloInt  
  INTEGER as snVrrpVirRtr2DeadInt  
  INTEGER as snVrrpVirRtr2PreemptMode  
  INTEGER as snVrrpVirRtr2State  
  OCTET STRING as snVrrpVirRtr2IpAddrMask  
  INTEGER as snVrrpVirRtr2Activate  
  INTEGER as snVrrpVirRtr2BackupInt  
  INTEGER as snVrrpVirRtr2RowStatus  
  Counter as snVrrpVirRtr2RxArpPktDropCnts  
  Counter as snVrrpVirRtr2RxIpPktDropCnts  
  Counter as snVrrpVirRtr2RxPortMismatchCnts  
  Counter as snVrrpVirRtr2RxNumOfIpMismatchCnts  
  Counter as snVrrpVirRtr2RxIpMismatchCnts  
  Counter as snVrrpVirRtr2RxHelloIntMismatchCnts  
  Counter as snVrrpVirRtr2RxPriorityZeroFromMasterCnts  
  Counter as snVrrpVirRtr2RxHigherPriorityCnts  
  Counter as snVrrpVirRtr2TransToMasterStateCnts  
  Counter as snVrrpVirRtr2TransToBackupStateCnts  
  INTEGER as snVrrpVirRtr2CurrDeadInt  
  OCTET STRING as snVrrpVirRtr2TrackPortList  
  INTEGER as snVrrpVirRtr2AdvertiseBackup  
  IpAddress as snVrrpVirRtr2MasterIpAddr  
  INTEGER as snVrrpVirRtr2IpAddrCount  
  MacAddress as snVrrpVirRtr2VirtualMacAddr