FOUNDRY-SN-WIRELESS-GROUP-MIB

File: FOUNDRY-SN-WIRELESS-GROUP-MIB.mib (12445 bytes)

Imported modules

RFC1155-SMI RFC-1212 SNMPv2-TC
FOUNDRY-SN-SWITCH-GROUP-MIB

Imported symbols

Counter TimeTicks IpAddress
Gauge enterprises OBJECT-TYPE
TEXTUAL-CONVENTION snWireless

Defined Objects

wgGroup 1.3.6.1.4.1.1991.1.1.3.23.1
OBJECT IDENTIFIER    

wgMobilityId 1.3.6.1.4.1.1991.1.1.3.23.1.1
Unique Identifier used to specify the mobility doamin. Valid range is <1 - 65535>. Use <0> to remove the domain.
OBJECT-TYPE    
  INTEGER  

wgVpnPTDeletePolicy 1.3.6.1.4.1.1991.1.1.3.23.1.2
Write a valid VPN pass through policy ID to remove the policy. Return zero when reading this object.
OBJECT-TYPE    
  INTEGER  

wgIfTable 1.3.6.1.4.1.1991.1.1.3.23.2
WiFi Interface Table.
OBJECT-TYPE    
  SEQUENCE OF  
    WgIfEntry

wgIfEntry 1.3.6.1.4.1.1991.1.1.3.23.2.1
An entry of the WiFi Interface Table.
OBJECT-TYPE    
  WgIfEntry  

wgIfIndex 1.3.6.1.4.1.1991.1.1.3.23.2.1.1
ifIndex value of the switch interface.
OBJECT-TYPE    
  INTEGER  

wgIfWirelessEnable 1.3.6.1.4.1.1991.1.1.3.23.2.1.2
Control wireless function of the switch interface.
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

wgIfPnPLearnNewAP 1.3.6.1.4.1.1991.1.1.3.23.2.1.3
Control the interface to learn new AP.
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

wgIfAutoPortDisable 1.3.6.1.4.1.1991.1.1.3.23.2.1.4
Disable the interface if the interface link status change.
OBJECT-TYPE    
  INTEGER other(1), enable(2), disable(3)  

wgIfVpnPTPolicyId 1.3.6.1.4.1.1991.1.1.3.23.2.1.5
To bind an interface to a VPN pass through policy, write a valid policy number which is larger than zero. To unbind an interface to a VPN pass through policy, write a zero.
OBJECT-TYPE    
  INTEGER  

wgRoamingPeerTable 1.3.6.1.4.1.1991.1.1.3.23.3
Roaming Peer table contains information of peers.
OBJECT-TYPE    
  SEQUENCE OF  
    WgRoamingPeerEntry

wgRoamingPeerEntry 1.3.6.1.4.1.1991.1.1.3.23.3.1
An entry of the roaming peer table.
OBJECT-TYPE    
  WgRoamingPeerEntry  

wgRoamingPeerIpAddress 1.3.6.1.4.1.1991.1.1.3.23.3.1.1
IP Address of the ISRP peer.
OBJECT-TYPE    
  IpAddress  

wgRoamingPeerConnectionStatus 1.3.6.1.4.1.1991.1.1.3.23.3.1.2
Shows the state of the ISRP Connection.
OBJECT-TYPE    
  INTEGER other(1), configured(2), established(3)  

wgRoamingPeerRowStatus 1.3.6.1.4.1.1991.1.1.3.23.3.1.3
Shows the state of the row in the PeerRow Table.
OBJECT-TYPE    
  INTEGER other(1), valid(2), delete(3), create(4)  

wgPnPTable 1.3.6.1.4.1.1991.1.1.3.23.4
AP Plug and Play Table.
OBJECT-TYPE    
  SEQUENCE OF  
    WgPnPEntry

wgPnPEntry 1.3.6.1.4.1.1991.1.1.3.23.4.1
An entry of the AP Plug and Play Table.
OBJECT-TYPE    
  WgPnPEntry  

wgPnPIfIndex 1.3.6.1.4.1.1991.1.1.3.23.4.1.1
ifIndex value of the switch interface.
OBJECT-TYPE    
  INTEGER  

wgPnPMacAddress 1.3.6.1.4.1.1991.1.1.3.23.4.1.2
MAC address of the attached AP.
OBJECT-TYPE    
  MacAddress  

wgPnPIpAddress 1.3.6.1.4.1.1991.1.1.3.23.4.1.3
IP address of the attached AP.
OBJECT-TYPE    
  IpAddress  

wgPnPIpMask 1.3.6.1.4.1.1991.1.1.3.23.4.1.4
Subnet mask of the attached AP.
OBJECT-TYPE    
  IpAddress  

wgPnPIpDefaultGw 1.3.6.1.4.1.1991.1.1.3.23.4.1.5
Default gateway of the attached AP.
OBJECT-TYPE    
  IpAddress  

wgPnPStatus 1.3.6.1.4.1.1991.1.1.3.23.4.1.6
AP device status. If the switch diecovered a new AP which had not been configured, the 'discovered' state will return. If the AP's IP address, subnet mask and default gateway were configured to the switch port but the AP with the matching MAC address had not attached to the switch port, 'configured' state will return. If the AP's IP address, subnet mask and default gateway were configured to the switch port and the AP with the matching MAC address had attached to the switch port and was operating, 'operational' state will return.
OBJECT-TYPE    
  INTEGER other(1), discovered(2), configured(3), operational(4)  

wgPnPRowStatus 1.3.6.1.4.1.1991.1.1.3.23.4.1.7
Create, delete or modify a row of AP Plug and Play Table.
OBJECT-TYPE    
  INTEGER other(1), valid(2), delete(3), create(4), modify(5)  

wgVpnPTServerTable 1.3.6.1.4.1.1991.1.1.3.23.5
VPN pass through server table
OBJECT-TYPE    
  SEQUENCE OF  
    WgVpnPTServerEntry

wgVpnPTServerEntry 1.3.6.1.4.1.1991.1.1.3.23.5.1
An entry of the VPN pass through server table.
OBJECT-TYPE    
  WgVpnPTServerEntry  

wgVpnPTServerPolicyId 1.3.6.1.4.1.1991.1.1.3.23.5.1.1
VPN pass through policy identifier. It must be greater than zero.
OBJECT-TYPE    
  INTEGER  

wgVpnPTServerIpAddress 1.3.6.1.4.1.1991.1.1.3.23.5.1.2
VPN server IP address.
OBJECT-TYPE    
  IpAddress  

wgVpnPTServerRowStatus 1.3.6.1.4.1.1991.1.1.3.23.5.1.3
Create or delete a row of VPN pass through server table.
OBJECT-TYPE    
  INTEGER other(1), valid(2), delete(3), create(4)  

wgVpnPTFilterTable 1.3.6.1.4.1.1991.1.1.3.23.6
VPN pass through filter table
OBJECT-TYPE    
  SEQUENCE OF  
    WgVpnPTFilterEntry

wgVpnPTFilterEntry 1.3.6.1.4.1.1991.1.1.3.23.6.1
An entry of the VPN pass through filter table.
OBJECT-TYPE    
  WgVpnPTFilterEntry  

wgVpnPTFilterPolicyId 1.3.6.1.4.1.1991.1.1.3.23.6.1.1
VPN pass through policy identifier. It must be greater than zero.
OBJECT-TYPE    
  INTEGER  

wgVpnPTFilterProtocol 1.3.6.1.4.1.1991.1.1.3.23.6.1.2
Allow this type of protocol to pass through.
OBJECT-TYPE    
  INTEGER other(1), udp(2), tcp(3)  

wgVpnPTFilterPort 1.3.6.1.4.1.1991.1.1.3.23.6.1.3
Allow this protocol port to pass through.
OBJECT-TYPE    
  INTEGER  

wgVpnPTFilterRowStatus 1.3.6.1.4.1.1991.1.1.3.23.6.1.4
Create or delete a row of VPN pass through filter table.
OBJECT-TYPE    
  INTEGER other(1), valid(2), delete(3), create(4)  

wgVpnPTPolicyTable 1.3.6.1.4.1.1991.1.1.3.23.7
VPN pass through policy table
OBJECT-TYPE    
  SEQUENCE OF  
    WgVpnPTPolicyEntry

wgVpnPTPolicyEntry 1.3.6.1.4.1.1991.1.1.3.23.7.1
An entry of the VPN pass through policy table.
OBJECT-TYPE    
  WgVpnPTPolicyEntry  

wgVpnPTPolicyId 1.3.6.1.4.1.1991.1.1.3.23.7.1.1
VPN pass through policy identifier. It must be greater than zero.
OBJECT-TYPE    
  INTEGER  

wgVpnPTPolicyPortList 1.3.6.1.4.1.1991.1.1.3.23.7.1.2
A list of ports bound to this VPN pass through policy.
OBJECT-TYPE    
  IfIndexList  

Defined Objects

MacAddress  
OCTET STRING SIZE(6)    

DisplayString  
OCTET STRING    

IfIndexList  
Each octet within this value specifies a set of eight interfaces by their ifIndex values, with the first octet specifying interfaces 1 through 8, the second octet specifying interfaces 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered interface, and the least significant bit represents the highest numbered interface. Thus, each interface of the device is represented by a single bit within the value of this object. If that bit has a value of '1' then that interface is included in the set of interfaces; the interface is not included if its bit has a value of '0'.
TEXTUAL-CONVENTION    
  OCTET STRING  

WgIfEntry  
SEQUENCE    
  INTEGER as wgIfIndex  
  INTEGER as wgIfWirelessEnable  
  INTEGER as wgIfPnPLearnNewAP  
  INTEGER as wgIfAutoPortDisable  
  INTEGER as wgIfVpnPTPolicyId  

WgRoamingPeerEntry  
SEQUENCE    
  IpAddress as wgRoamingPeerIpAddress  
  INTEGER as wgRoamingPeerConnectionStatus  
  INTEGER as wgRoamingPeerRowStatus  

WgPnPEntry  
SEQUENCE    
  INTEGER as wgPnPIfIndex  
  MacAddress as wgPnPMacAddress  
  IpAddress as wgPnPIpAddress  
  IpAddress as wgPnPIpMask  
  IpAddress as wgPnPIpDefaultGw  
  INTEGER as wgPnPStatus  
  INTEGER as wgPnPRowStatus  

WgVpnPTServerEntry  
SEQUENCE    
  INTEGER as wgVpnPTServerPolicyId  
  IpAddress as wgVpnPTServerIpAddress  
  INTEGER as wgVpnPTServerRowStatus  

WgVpnPTFilterEntry  
SEQUENCE    
  INTEGER as wgVpnPTFilterPolicyId  
  INTEGER as wgVpnPTFilterProtocol  
  INTEGER as wgVpnPTFilterPort  
  INTEGER as wgVpnPTFilterRowStatus  

WgVpnPTPolicyEntry  
SEQUENCE    
  INTEGER as wgVpnPTPolicyId  
  IfIndexList as wgVpnPTPolicyPortList