Fore-Profile-MIB

File: Fore-Profile-MIB.mib (49243 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC Fore-Common-MIB

Imported symbols

Integer32 OBJECT-TYPE MODULE-IDENTITY
DisplayString RowStatus frameInternetworking

Defined Objects

foreProfileModule 1.3.6.1.4.1.326.1.16.4
This MIB module defines several profile tables that facilitate the creation of FR/ATM and FUNI services and connections.
MODULE-IDENTITY    

profileLmiTable 1.3.6.1.4.1.326.1.16.4.1
The LMI profile table.
OBJECT-TYPE    
  SEQUENCE OF  
    ProfileLmiEntry

profileLmiEntry 1.3.6.1.4.1.326.1.16.4.1.1
An entry in the LMI profile table.
OBJECT-TYPE    
  ProfileLmiEntry  

profileLmiIndex 1.3.6.1.4.1.326.1.16.4.1.1.1
This objects identifies the index of a profile entry in this table.
OBJECT-TYPE    
  Integer32  

profileLmiRowStatus 1.3.6.1.4.1.326.1.16.4.1.1.2
This object is used to create new rows and delete existing rows in this table.
OBJECT-TYPE    
  RowStatus  

profileLmiName 1.3.6.1.4.1.326.1.16.4.1.1.3
This object specifies the symbolic name assigned to this profile for user reference.
OBJECT-TYPE    
  DisplayString  

profileLmiFlavour 1.3.6.1.4.1.326.1.16.4.1.1.4
This object specifies the type of the LMI protocol used over this FR service. This object corresponds to frLportVCSigProtocol in RFC1604 and frDlcmiState in RFC1315.
OBJECT-TYPE    
  INTEGER none(1), lmi(2), t1617d(3), t1617b(4), q933a(5)  

profileLmiT391 1.3.6.1.4.1.326.1.16.4.1.1.5
The value of this object identifies the User-side T391 link integrity verification polling timer value (in seconds) for this UNI/NNI logical port. If the logical port is not performing user-side procedures, then this value is equal to noSuchName. This object applies to Q.933 Annex A and T1.617 Annex D. This object corresponds to frMgtVCSigUserT391 in RFC1604 and frDlcmiPollingInterval in RFC1315.
OBJECT-TYPE    
  Integer32 5..30  

profileLmiN391 1.3.6.1.4.1.326.1.16.4.1.1.6
The value of this object identifies the User-side N391 full status polling cycle value for this UNI/NNI logical port. If the logical port is not performing user-side procedures, then this value is equal to noSuchName. This object applies to Q.933 Annex A and T1.617 Annex D. This object corresponds to frMgtVCSigUserN391 in RFC1604 and frDlcmiFullEnquiryInterval.
OBJECT-TYPE    
  Integer32 1..255  

profileLmiT392 1.3.6.1.4.1.326.1.16.4.1.1.7
The value of this object identifies the Network- side T392 polling verification timer value in seconds (nT2 for LMI) for this UNI/NNI logical port. If the logical port is not performing network-side procedures, then this value is equal to noSuchName. This object applies to Q.933 Annex A, LMI and T1.617 Annex D. This object corresponds to frMgtVCSigNetT392 in RFC1604.
OBJECT-TYPE    
  Integer32 5..30  

profileLmiN392 1.3.6.1.4.1.326.1.16.4.1.1.8
The value of this object identifies the Network- side N392 error threshold value (nN2 for LMI) for this UNI/NNI logical port. If the logical port is not performing network-side procedures, then this value is equal to noSuchName. This object applies to Q.933 Annex A, T1.617 Annex D and LMI. This object corresponds to frMgtVCSigNetN392 and frMgtVCSigUserN392 when the LMI role is network and user respectively in RFC1604, and frDlcmiErrorThreshold in RFC1315.
OBJECT-TYPE    
  Integer32 1..10  

profileLmiN393 1.3.6.1.4.1.326.1.16.4.1.1.9
The value of this object identifies the Network- side N393 monitored events count value (nN3 for LMI) for this UNI/NNI logical port. If the logical port is not performing network-side procedures, then this value is equal to noSuchName. This object applies to Q.933 Annex A, LMI and T1.617 Annex D. This object corresponds to frMgtVCSigNetN393 and frMgtVCSigUserN393 when the LMI role is network and user respectively in RFC1604, and frDlcmiMonitoredEvents in RFC1315.
OBJECT-TYPE    
  Integer32 1..10  

profileLminT3 1.3.6.1.4.1.326.1.16.4.1.1.10
The value of this object identifies the Network-side nT3 timer in seconds (for nN4 status enquires received) value for this FR service. This object applies only to LMI(STRATACOM) flavour. The allowable values include 5, 10, 15, 20, 25 and 30 seconds. This object corresponds to frMgtVCSigNetnT3 in RFC1604.
OBJECT-TYPE    
  Integer32 5 | 10 | 15 | 20 | 25 | 30  

profileLmiDirection 1.3.6.1.4.1.326.1.16.4.1.1.11
The value of this object identifies the Local In-Channel Signaling Procedure that is used for this UNI/NNI logical port. The UNI/NNI logical port can be performing only user-to-network network-side procedures or bidirectional procedures.This object corresponds to frMgtVCSigProced in RFC1604.
OBJECT-TYPE    
  INTEGER uni(1), bi(2)  

profileLmiRole 1.3.6.1.4.1.326.1.16.4.1.1.12
This object specifies the role of operation of this FR service - user (DTE) or network (DCE)
OBJECT-TYPE    
  INTEGER user(1), network(2)  

profileLmiRefCnt 1.3.6.1.4.1.326.1.16.4.1.1.13
This object identifies the number of services that are currently referring to this profile.
OBJECT-TYPE    
  Integer32  

profileFrRateTable 1.3.6.1.4.1.326.1.16.4.2
The FR rate profile table.
OBJECT-TYPE    
  SEQUENCE OF  
    ProfileFrRateEntry

profileFrRateEntry 1.3.6.1.4.1.326.1.16.4.2.1
An entry in the FR rate profile table.
OBJECT-TYPE    
  ProfileFrRateEntry  

profileFrRateIndex 1.3.6.1.4.1.326.1.16.4.2.1.1
This object identifies the index of a profile entry in this table.
OBJECT-TYPE    
  Integer32  

profileFrRateRowStatus 1.3.6.1.4.1.326.1.16.4.2.1.2
This object is used to create new rows and delete existing rows in this table.
OBJECT-TYPE    
  RowStatus  

profileFrRateName 1.3.6.1.4.1.326.1.16.4.2.1.3
This object identifies the symbolic name assigned to this profile used for user reference.
OBJECT-TYPE    
  DisplayString  

profileFrRateInBc 1.3.6.1.4.1.326.1.16.4.2.1.4
This object represents the committed burst size (bits) in the ingress direction of a connection. This object corresponds to frPVCEndptInBc in RFC1604 and frCircuitCommittedBurst in RFC1315.
OBJECT-TYPE    
  Integer32  

profileFrRateInBe 1.3.6.1.4.1.326.1.16.4.2.1.5
This object represents the excess burst size (bits) in the ingress direction of a connection. This object corresponds to frPVCEndptInBe in RFC1604 and frCircuitExcessBurst in RFC1315.
OBJECT-TYPE    
  Integer32  

profileFrRateInCir 1.3.6.1.4.1.326.1.16.4.2.1.6
This object represents the committed information rate (kbps) in the ingress direction of a connection. This object corresponds to frPVCEndptInCIR in RFC1604 and frCircuitThroughput in RFC1315.
OBJECT-TYPE    
  Integer32  

profileFrRateOutBc 1.3.6.1.4.1.326.1.16.4.2.1.7
This object represents the committed burst size (bits) in the egress direction of a connection. This object corresponds frPVCEndptOutBc in RFC1604.
OBJECT-TYPE    
  Integer32  

profileFrRateOutBe 1.3.6.1.4.1.326.1.16.4.2.1.8
This object represents the excess burst size (bits) in the egress direction of a connection. This object corresponds frPVCEndptOutBe in RFC1604.
OBJECT-TYPE    
  Integer32  

profileFrRateOutCir 1.3.6.1.4.1.326.1.16.4.2.1.9
This object represents the committed information rate (kbps) in the egress direction of a connection. This object corresponds frPVCEndptOutCIR in RFC1604.
OBJECT-TYPE    
  Integer32  

profileFrRateMinBc 1.3.6.1.4.1.326.1.16.4.2.1.10
This object represents the minimum committed burst size (bits) which can be set on a connection by rate adaptation.
OBJECT-TYPE    
  Integer32  

profileFrRateCmPeriod 1.3.6.1.4.1.326.1.16.4.2.1.11
This object represents the time period (msec) during which BECNs are monitored before the rate adaptation mechanism decides to change the current committed burst size in the egress direction.
OBJECT-TYPE    
  Integer32  

profileFrRateRefCnt 1.3.6.1.4.1.326.1.16.4.2.1.12
This object identifies the number of connections that are currently referring to this profile entry.
OBJECT-TYPE    
  Integer32  

profileFuniTable 1.3.6.1.4.1.326.1.16.4.3
The FUNI profile table.
OBJECT-TYPE    
  SEQUENCE OF  
    ProfileFuniEntry

profileFuniEntry 1.3.6.1.4.1.326.1.16.4.3.1
An entry in the FUNI profile table.
OBJECT-TYPE    
  ProfileFuniEntry  

profileFuniIndex 1.3.6.1.4.1.326.1.16.4.3.1.1
This object identifies the index of a profile entry in this table.
OBJECT-TYPE    
  Integer32  

profileFuniRowStatus 1.3.6.1.4.1.326.1.16.4.3.1.2
This object is used to create new rows and delete existing rows in this table.
OBJECT-TYPE    
  RowStatus  

profileFuniName 1.3.6.1.4.1.326.1.16.4.3.1.3
This object specifies the symbolic name assigned to this profile for user reference.
OBJECT-TYPE    
  DisplayString  

profileFuniIlmiVpi 1.3.6.1.4.1.326.1.16.4.3.1.4
This object represents VPI value used by ILMI over this FUNI interface. This object corresponds to funiIfConfIlmiVpi in FUNI MIB.
OBJECT-TYPE    
  Integer32  

profileFuniIlmiVci 1.3.6.1.4.1.326.1.16.4.3.1.5
This object represents VCI value used by ILMI over this FUNI service. This object corresponds to funiIfConfIlmiVci in FUNI MIB.
OBJECT-TYPE    
  Integer32  

profileFuniSigVpi 1.3.6.1.4.1.326.1.16.4.3.1.6
This object represents VPI value used for the signalling channel over this FUNI service. This object corresponds to funiIfConfSigVpi in FUNI MIB.
OBJECT-TYPE    
  Integer32  

profileFuniSigVci 1.3.6.1.4.1.326.1.16.4.3.1.7
This object represents VCI value used for the signalling channel over this FUNI service. This object corresponds to funiIfConfSigVci in FUNI MIB.
OBJECT-TYPE    
  Integer32  

profileFuniMinVci 1.3.6.1.4.1.326.1.16.4.3.1.8
This object represents minimal numeric value allowed to be used as a VCI on any user connection over this FUNI service.
OBJECT-TYPE    
  Integer32 32..63  

profileFuniMaxVci 1.3.6.1.4.1.326.1.16.4.3.1.9
This object represents maximal numeric value allowed to be used as a VCI on any user connection over this FUNI service.
OBJECT-TYPE    
  Integer32 32..63  

profileFuniIlmiSupport 1.3.6.1.4.1.326.1.16.4.3.1.10
This object specifies that an ILMI instance is to be supported on this FUNI service if the mode is set to enabled. This object corresponds to funiIfConfIlmiSupport in FUNI MIB.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

profileFuniSigSupport 1.3.6.1.4.1.326.1.16.4.3.1.11
This object specifies that a signalling instance is to be supported on this FUNI service if the mode is set to enabled. This object corresponds to funiIfConfSigSupport in FUNI MIB.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

profileFuniOamSupport 1.3.6.1.4.1.326.1.16.4.3.1.12
This object specifies that OAM cells and frames are to be transferred on this FUNI service if the mode is set to enabled. This object corresponds to funiIfConfOamSupport in FUNI MIB.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

profileFuniActiveVpiBits 1.3.6.1.4.1.326.1.16.4.3.1.13
The value of this object identifies the maximum number of active VPI bits configured for use at this FUNI interface. At the ATM FUNI, this value will be smaller than or equal to 4 and 8 when the FUNI header size is two and four bytes respectively, as specified by the profile attribute profileFuniConfMode. This object corresponds to atmInterfaceMaxActiveVpiBits in the ATOM MIB.
OBJECT-TYPE    
  Integer32 0..8  

profileFuniActiveVciBits 1.3.6.1.4.1.326.1.16.4.3.1.14
The value of this object identifies the maximum number of active VCI bits configured for use at this FUNI interface. At the ATM FUNI, this value will be smaller than or equal to 6 and 16 when the FUNI header size is two and four bytes respectively, as specified by the profile attribute profileFuniConfMode. This object corresponds to atmInterfaceMaxActiveVciBits in the ATOM MIB.
OBJECT-TYPE    
  Integer32 0..16  

profileFuniConfMode 1.3.6.1.4.1.326.1.16.4.3.1.15
The value of this object specifies whether a 2 or 4 byte header is present in each FUNI frame header over a FUNI service. For mode1a, mode1b and mode 3, a 2-byte header is used. For mode 4, a 4-byte header is used. This object corresponds to funiIfConfMode in FUNI MIB.
OBJECT-TYPE    
  INTEGER mode1a(1), mode1b(2), mode3(3), mode4(4)  

profileFuniFcsBits 1.3.6.1.4.1.326.1.16.4.3.1.16
This object specifies whether a 16- or 32-bit FCS is used in each FUNI frame header over this FUNI logical interface.
OBJECT-TYPE    
  INTEGER fcsBits16(1), fcsBits32(2)  

profileFuniHdrBytes 1.3.6.1.4.1.326.1.16.4.3.1.17
This object specifies whether a 2- or 4-bytes header is used in each FUNI frame header over this FUNI logical interface.
OBJECT-TYPE    
  INTEGER hdrBytes2(1), hdrBytes4(2)  

profileFuniAal34Support 1.3.6.1.4.1.326.1.16.4.3.1.18
This object specifies whether support for AAL3/4 VCCs shall be allowed on this FUNI logical interface. A FUNI logical interface that cannot support AAL3/4 VCCs must only allow the value disabled(2).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

profileFuniRefCnt 1.3.6.1.4.1.326.1.16.4.3.1.19
The value of this object identifies the number of services that are referring to this profile.
OBJECT-TYPE    
  Integer32  

profileFrf8Table 1.3.6.1.4.1.326.1.16.4.4
The FRF.8 profile table.
OBJECT-TYPE    
  SEQUENCE OF  
    ProfileFrf8Entry

profileFrf8Entry 1.3.6.1.4.1.326.1.16.4.4.1
An entry in the FRF.8 profile table.
OBJECT-TYPE    
  ProfileFrf8Entry  

profileFrf8Index 1.3.6.1.4.1.326.1.16.4.4.1.1
This object identifies the index of a profile in this table.
OBJECT-TYPE    
  Integer32  

profileFrf8RowStatus 1.3.6.1.4.1.326.1.16.4.4.1.2
This object is used to create new rows and delete existing rows in this table.
OBJECT-TYPE    
  RowStatus  

profileFrf8Name 1.3.6.1.4.1.326.1.16.4.4.1.3
This object specifies the symbolic name assigned to this profile for user reference.
OBJECT-TYPE    
  DisplayString  

profileFrf8DeMode 1.3.6.1.4.1.326.1.16.4.4.1.4
If the DE mode is set to mapped, the DE field in the Q922 core frame is mapped to the ATM CLP filled of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame. Otherwise, the ATM CLP of every ATM cell generated by the segmentation process of the AAL5 PDU containing the information of that frame is set to a constant value specified by the configuration parameter profileFrf8DefaultClp.
OBJECT-TYPE    
  INTEGER mapped(1), ignored(2)  

profileFrf8ClpMode 1.3.6.1.4.1.326.1.16.4.4.1.5
If the CLP mode is set to mapped, then the FR/ATM service interworking function will set the DE field of the Q922 core frame, provided that one or more cells belonging to this frame has its CLP field set. Otherwise, the DE field of the Q922 core frame is set to a constant value specified by the configuration parameter profileFrf8DefaultDe.
OBJECT-TYPE    
  INTEGER mapped(1), ignored(2)  

profileFrf8FecnMode 1.3.6.1.4.1.326.1.16.4.4.1.6
If the Fecn mode is set to mapped, the FECN field in the Q922 core frame is mapped to the ATM EFCI field of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame. This mode provides congestion indication to the end-points where higher layer protocol entities might be involved in traffic control mechanisms. Otherwise, the EFCI field of cells generated by the segmentation process of the AAL5 PDU containing the information of the frame is always set to congestion-not-experienced.
OBJECT-TYPE    
  INTEGER mapped(1), ignored(2)  

profileFrf8DefaultDe 1.3.6.1.4.1.326.1.16.4.4.1.7
This object represents the DE bit value of all generated FR frame headers if the CLP mode is set to ignored.
OBJECT-TYPE    
  Integer32 0..1  

profileFrf8DefaultClp 1.3.6.1.4.1.326.1.16.4.4.1.8
This object represents the CLP bit value of all generated ATM cell headers if the DE mode is set to ignored.
OBJECT-TYPE    
  Integer32 0..1  

profileFrf8Protocols 1.3.6.1.4.1.326.1.16.4.4.1.9
This object represents a binary map which lists all possible encapsulation translation protocols over this FRF.8 IWF instance. Any combination of the specified encapsulation modes will be supported. The binary map assignment is defined as below: ethernet (0000000000001) ethernetFcs (0000000000010) tokenRing (0000000000100) tokenRingFcs (0000000001000) ipRouted (0000000010000) arp (0000000100000) ipx (0000001000000) sna (0000010000000) fddi (0000100000000) fddiFcs (0001000000000) x.25/75 (0010000000000) 802.6 (0100000000000) routedIso (1000000000000) or any combinations of the binary map. The allowable range of the input is from 0 to 8191. This object corresponds to frf8ProtProtocol in fore-frf8 MIB.
OBJECT-TYPE    
  Integer32 0..8191  

profileFrf8RefCnt 1.3.6.1.4.1.326.1.16.4.4.1.10
The value of this object identifies the number of connections that are currently referring to this profile.
OBJECT-TYPE    
  Integer32  

profileServiceTable 1.3.6.1.4.1.326.1.16.4.5
The generic service profile table.
OBJECT-TYPE    
  SEQUENCE OF  
    ProfileServiceEntry

profileServiceEntry 1.3.6.1.4.1.326.1.16.4.5.1
An entry in the generic service profile table.
OBJECT-TYPE    
  ProfileServiceEntry  

profileServiceIndex 1.3.6.1.4.1.326.1.16.4.5.1.1
This object identifies the index of a profile in this table.
OBJECT-TYPE    
  Integer32  

profileServiceRowStatus 1.3.6.1.4.1.326.1.16.4.5.1.2
This object is used to create new rows and delete existing rows in this table.
OBJECT-TYPE    
  RowStatus  

profileServiceName 1.3.6.1.4.1.326.1.16.4.5.1.3
This object specifies the symbolic name assigned to this profile for user reference.
OBJECT-TYPE    
  DisplayString  

profileServiceAccRate 1.3.6.1.4.1.326.1.16.4.5.1.4
This object represents the access rate of the service (kbps).
OBJECT-TYPE    
  Integer32  

profileServiceMaxVccs 1.3.6.1.4.1.326.1.16.4.5.1.5
The maximum number of virtual circuits supported in this service. This object corresponds to frDlcmiMaxSupportedVCs in RFC1315 and funiIfExtConfVccs in fore-funi MIB.
OBJECT-TYPE    
  Integer32  

profileServiceMaxPayloadSize 1.3.6.1.4.1.326.1.16.4.5.1.6
This object represents the maximum payload size (bytes) supported by the service. This object corresponds to frPVCEndptInMaxFrameSize and frPVCEndptOutMaxFrameSize in RFC1604.
OBJECT-TYPE    
  Integer32  

profileServiceInBwOb 1.3.6.1.4.1.326.1.16.4.5.1.7
This object represents the bandwidth overbooking (percentage) of the service in the inbound direction. If the percentage is bigger than 100%, it is overbooking; otherwise it is underbooking.
OBJECT-TYPE    
  Integer32 1..500  

profileServiceOutBwOb 1.3.6.1.4.1.326.1.16.4.5.1.8
This object represents the bandwidth overbooking (percentage) of the service in the outbound direction. If the percentage is bigger than 100%, it is overbooking; otherwise it is underbooking.
OBJECT-TYPE    
  Integer32 1..500  

profileServiceRefCnt 1.3.6.1.4.1.326.1.16.4.5.1.9
The value of this object identifies the number of services that are currently referring to this profile.
OBJECT-TYPE    
  Integer32  

profileEpdPpdTable 1.3.6.1.4.1.326.1.16.4.6
The EPD/PPD profile table.
OBJECT-TYPE    
  SEQUENCE OF  
    ProfileEpdPpdEntry

profileEpdPpdEntry 1.3.6.1.4.1.326.1.16.4.6.1
An entry in the EPD/PPD profile table.
OBJECT-TYPE    
  ProfileEpdPpdEntry  

profileEpdPpdIndex 1.3.6.1.4.1.326.1.16.4.6.1.1
This object identifies the index of a profile in this table.
OBJECT-TYPE    
  Integer32  

profileEpdPpdRowStatus 1.3.6.1.4.1.326.1.16.4.6.1.2
This object is used to create new rows and delete existing rows in this table.
OBJECT-TYPE    
  RowStatus  

profileEpdPpdName 1.3.6.1.4.1.326.1.16.4.6.1.3
This object specifies the symbolic name assigned to this profile for user reference.
OBJECT-TYPE    
  DisplayString  

profileEpdPpdPriority 1.3.6.1.4.1.326.1.16.4.6.1.4
This object specifies the EPD/PPD priority queue the connection is assigned.
OBJECT-TYPE    
  INTEGER low(1), high(2)  

profileEpdPpdClp0Epd 1.3.6.1.4.1.326.1.16.4.6.1.5
This object specifies whether the EPD/PPD controller discards CLP=0 traffic after the Clp0Epd threshold has been hit.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

profileEpdPpdClp1Ppd 1.3.6.1.4.1.326.1.16.4.6.1.6
This object specifies whether the EPD/PPD controller discards CLP=1 traffic after the Clp1Ppd threshold has been hit.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

profileEpdPpdClp1Epd 1.3.6.1.4.1.326.1.16.4.6.1.7
This object specifies whether the EPD/PPD controller discards CLP=1 traffic after the Clp1Epd threshold has been hit.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

profileEpdPpdRefCnt 1.3.6.1.4.1.326.1.16.4.6.1.8
The value of this object identifies the number of connections that are currently referring to this profile.
OBJECT-TYPE    
  Integer32  

profileFrf5Table 1.3.6.1.4.1.326.1.16.4.7
The FRF.5 profile table.
OBJECT-TYPE    
  SEQUENCE OF  
    ProfileFrf5Entry

profileFrf5Entry 1.3.6.1.4.1.326.1.16.4.7.1
An entry in the FRF.5 profile table.
OBJECT-TYPE    
  ProfileFrf5Entry  

profileFrf5Index 1.3.6.1.4.1.326.1.16.4.7.1.1
This object identifies the index of a profile in this table. Indices 1 though 20 are reserved for system defaults
OBJECT-TYPE    
  INTEGER  

profileFrf5RowStatus 1.3.6.1.4.1.326.1.16.4.7.1.2
This object is used to create new rows and delete existing rows in this table.
OBJECT-TYPE    
  RowStatus  

profileFrf5Name 1.3.6.1.4.1.326.1.16.4.7.1.3
This object specifies the symbolic name assigned to this profile for user reference.
OBJECT-TYPE    
  DisplayString  

profileFrf5DeMode 1.3.6.1.4.1.326.1.16.4.7.1.4
If the DE mode is set to mapped, the DE field in the FR_SSCS frame is mapped to the ATM CLP filled of every cell generated by the segmentation process of the AAL5 PDU containing the information of that frame. Otherwise, if the DE mode is set to ignored, the ATM CLP of every ATM cell generated by the segmentation process of the AAL5 PDU containing the information of that frame is set to a constant value specified by the configuration parameter profileFrf5DefaultClp.
OBJECT-TYPE    
  INTEGER mapped(1), ignored(2)  

profileFrf5ClpFrsscsDeMode 1.3.6.1.4.1.326.1.16.4.7.1.5
If the CLP mode is set to mapped, the FR/ATM network interworking function will set the DE field of the Q922 core frame, provided that one or more cells belonging to this frame has its CLP field set, or the DE bit of FR_SSCS frame is set. Otherwise, if the CLP mode is set to ignored, the DE bit of FR_SSCS frame is copied to the Q922 core frame.
OBJECT-TYPE    
  INTEGER mapped(1), ignored(2)  

profileFrf5DefaultClp 1.3.6.1.4.1.326.1.16.4.7.1.6
This object represents the CLP bit value of all generated ATM cell headers if the DE mode is set to ignored.
OBJECT-TYPE    
  INTEGER 0..1  

profileFrf5MaxDlcis 1.3.6.1.4.1.326.1.16.4.7.1.7
The maximum number of virtual circuits supported in this VCC.
OBJECT-TYPE    
  INTEGER  

profileFrf5MaxPayloadSize 1.3.6.1.4.1.326.1.16.4.7.1.8
This object represents the maximum payload size (bytes) supported by the VCC.
OBJECT-TYPE    
  INTEGER  

profileFrf5RefCnt 1.3.6.1.4.1.326.1.16.4.7.1.9
The value of this object identifies the number of connections that are currently referring to this profile.
OBJECT-TYPE    
  INTEGER  

Defined Objects

ProfileLmiEntry  
SEQUENCE    
  Integer32 as profileLmiIndex  
  RowStatus as profileLmiRowStatus  
  DisplayString as profileLmiName  
  INTEGER as profileLmiFlavour  
  Integer32 as profileLmiT391  
  Integer32 as profileLmiN391  
  Integer32 as profileLmiT392  
  Integer32 as profileLmiN392  
  Integer32 as profileLmiN393  
  Integer32 as profileLminT3  
  INTEGER as profileLmiDirection  
  INTEGER as profileLmiRole  
  Integer32 as profileLmiRefCnt  

ProfileFrRateEntry  
SEQUENCE    
  Integer32 as profileFrRateIndex  
  RowStatus as profileFrRateRowStatus  
  DisplayString as profileFrRateName  
  Integer32 as profileFrRateInBc  
  Integer32 as profileFrRateInBe  
  Integer32 as profileFrRateInCir  
  Integer32 as profileFrRateOutBc  
  Integer32 as profileFrRateOutBe  
  Integer32 as profileFrRateOutCir  
  Integer32 as profileFrRateMinBc  
  Integer32 as profileFrRateCmPeriod  
  Integer32 as profileFrRateRefCnt  

ProfileFuniEntry  
SEQUENCE    
  Integer32 as profileFuniIndex  
  RowStatus as profileFuniRowStatus  
  DisplayString as profileFuniName  
  Integer32 as profileFuniIlmiVpi  
  Integer32 as profileFuniIlmiVci  
  Integer32 as profileFuniSigVpi  
  Integer32 as profileFuniSigVci  
  Integer32 as profileFuniMinVci  
  Integer32 as profileFuniMaxVci  
  INTEGER as profileFuniIlmiSupport  
  INTEGER as profileFuniSigSupport  
  INTEGER as profileFuniOamSupport  
  Integer32 as profileFuniActiveVpiBits  
  Integer32 as profileFuniActiveVciBits  
  INTEGER as profileFuniConfMode  
  INTEGER as profileFuniFcsBits  
  INTEGER as profileFuniHdrBytes  
  INTEGER as profileFuniAal34Support  
  Integer32 as profileFuniRefCnt  

ProfileFrf8Entry  
SEQUENCE    
  Integer32 as profileFrf8Index  
  RowStatus as profileFrf8RowStatus  
  DisplayString as profileFrf8Name  
  INTEGER as profileFrf8DeMode  
  INTEGER as profileFrf8ClpMode  
  INTEGER as profileFrf8FecnMode  
  Integer32 as profileFrf8DefaultDe  
  Integer32 as profileFrf8DefaultClp  
  Integer32 as profileFrf8Protocols  
  Integer32 as profileFrf8RefCnt  

ProfileServiceEntry  
SEQUENCE    
  Integer32 as profileServiceIndex  
  RowStatus as profileServiceRowStatus  
  DisplayString as profileServiceName  
  Integer32 as profileServiceAccRate  
  Integer32 as profileServiceMaxPayloadSize  
  Integer32 as profileServiceMaxVccs  
  Integer32 as profileServiceInBwOb  
  Integer32 as profileServiceOutBwOb  
  Integer32 as profileServiceRefCnt  

ProfileEpdPpdEntry  
SEQUENCE    
  Integer32 as profileEpdPpdIndex  
  RowStatus as profileEpdPpdRowStatus  
  DisplayString as profileEpdPpdName  
  INTEGER as profileEpdPpdPriority  
  INTEGER as profileEpdPpdClp0Epd  
  INTEGER as profileEpdPpdClp1Ppd  
  INTEGER as profileEpdPpdClp1Epd  
  Integer32 as profileEpdPpdRefCnt  

ProfileFrf5Entry  
SEQUENCE    
  INTEGER as profileFrf5Index  
  RowStatus as profileFrf5RowStatus  
  DisplayString as profileFrf5Name  
  INTEGER as profileFrf5DeMode  
  INTEGER as profileFrf5ClpFrsscsDeMode  
  INTEGER as profileFrf5DefaultClp  
  INTEGER as profileFrf5MaxPayloadSize  
  INTEGER as profileFrf5MaxDlcis  
  INTEGER as profileFrf5RefCnt