
| RFC1155-SMI | RFC1213-MIB | RFC-1212 |
| GDCMACRO-MIB |
| enterprises | Gauge | DisplayString |
| OBJECT-TYPE | SCinstance |
| gdc | 1.3.6.1.4.1.498 | ||
| OBJECT IDENTIFIER | |||
| bql | 1.3.6.1.4.1.498.10 | ||
| OBJECT IDENTIFIER | |||
| bqlMIBVersion | 1.3.6.1.4.1.498.10.1 | ||
| The version number of the MIB, to allow products to know which MIB is being supported. The version number will be x.yzT where x is a major revision (1-9), y is a minor revision(0-9), z is a typo revision (0-9) and T indicates the MIB is still a test revision(A-Z). When a release is complete no T should exist. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(5) | ||
| bqlWhatAreYouTable | 1.3.6.1.4.1.498.10.2 | ||
| The GDC SC616, DC610, DC612, GT 128 What Are You Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlWhatAreYouEntry | |||
| bqlWhatAreYouEntry | 1.3.6.1.4.1.498.10.2.1 | ||
| An entry in the GDC SC616 What Are You table. | |||
| OBJECT-TYPE | |||
| BqlWhatAreYouEntry | |||
| bqlWhatAreYouIndex | 1.3.6.1.4.1.498.10.2.1.1 | ||
| This object is the identifier of the SC616 What Are You table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlBaseCardType | 1.3.6.1.4.1.498.10.2.1.2 | ||
| This function returns the value the Base Card Type. | |||
| OBJECT-TYPE | |||
| INTEGER | dc610(2), dc612(4), sc616(5), gt128(9), gt128NZ(10) | ||
| bqlOptionCard | 1.3.6.1.4.1.498.10.2.1.3 | ||
| This indicates whether the option card is installed or not on the DC610 or DC612. | |||
| OBJECT-TYPE | |||
| INTEGER | notInstalled(1), installed(2) | ||
| bqlDTE2CardType | 1.3.6.1.4.1.498.10.2.1.4 | ||
| This object is the DTE channel 2 plug-in card type on the DC610 or DC612. | |||
| OBJECT-TYPE | |||
| INTEGER | eia530(1), x21(2), none(7) | ||
| bqlDTE1CardType | 1.3.6.1.4.1.498.10.2.1.5 | ||
| This object is the DTE channel 1 plug-in card type on the DC610 or DC612 or GT 128. | |||
| OBJECT-TYPE | |||
| INTEGER | eia530(1), x21(2), v35(3), none(7) | ||
| bqlCodeRev | 1.3.6.1.4.1.498.10.2.1.6 | ||
| This function returns the firmware code level. Example A- ,B- | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(4) | ||
| bqlAlarmStatus | 1.3.6.1.4.1.498.10.2.1.7 | ||
| The current alarms of the unit without the alarm masks. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..255) | ||
| bqlConfigTable | 1.3.6.1.4.1.498.10.3 | ||
| The GDC SC616, DC610, DC612, GT 128 2B1Q configuration table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlConfigEntry | |||
| bqlConfigEntry | 1.3.6.1.4.1.498.10.3.1 | ||
| A listing of GDC 2B1Q SC616 options. | |||
| OBJECT-TYPE | |||
| BqlConfigEntry | |||
| bqlConfigIndex | 1.3.6.1.4.1.498.10.3.1.1 | ||
| A unique index for the Configuration Table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlConfigChnlIndex | 1.3.6.1.4.1.498.10.3.1.2 | ||
| A unique channel index for the Configuration Table. | |||
| OBJECT-TYPE | |||
| INTEGER | channel1(1), channel2(2) | ||
| bqlTestPattern | 1.3.6.1.4.1.498.10.3.1.3 | ||
| Object to select loop and channel test pattern for SC616, DC610, DC612. | |||
| OBJECT-TYPE | |||
| INTEGER | pattern2047(1), pattern511(2) | ||
| bqlRLTimeout | 1.3.6.1.4.1.498.10.3.1.4 | ||
| Object to select loop and channel remote loop time out for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | noTimeout(1), timeoutAfter10Min(2) | ||
| bqlRespRL | 1.3.6.1.4.1.498.10.3.1.5 | ||
| Object to select loop and channel remote loop response for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| bqlRLType | 1.3.6.1.4.1.498.10.3.1.6 | ||
| Object to select loop and channel remote loop type for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | v54(1), pn127(2) | ||
| bqlBilateralRL | 1.3.6.1.4.1.498.10.3.1.7 | ||
| Object to select loop and channel bilateral remote loop for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| bqlInbandRTSDCD | 1.3.6.1.4.1.498.10.3.1.8 | ||
| Object to select loop and channel in-band RTS/DCD for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| bqlRTS | 1.3.6.1.4.1.498.10.3.1.9 | ||
| Object to select loop and channel RTS for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(1), force(2) | ||
| bqlRTSCTSDelay | 1.3.6.1.4.1.498.10.3.1.10 | ||
| Object to select loop and channel RTS/CTS delay for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | noDelay(1), delay(2) | ||
| bqlAntiStream | 1.3.6.1.4.1.498.10.3.1.11 | ||
| Object to select loop and channel Anti-streaming for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | noAntistream(1), antistream(2) | ||
| bqlTXDataElasticBufr | 1.3.6.1.4.1.498.10.3.1.12 | ||
| Object to select loop and channel transmit data elastic buffer for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| bqlRTSCTSDelayTime | 1.3.6.1.4.1.498.10.3.1.13 | ||
| Object to select loop and channel RTS to CTS delay time for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | ms0(1), ms5(2), ms10(3), ms15(4), ms20(5), ms25(6), ms30(7), ms35(8), ms40(9), ms45(10), ms50(11), ms55(12), ms60(13), ms65(14), ms70(15), ms75(16) | ||
| bqlAntiStreamTime | 1.3.6.1.4.1.498.10.3.1.14 | ||
| Object to select loop and channel anti-streaming time for DC610 and DC612 only. | |||
| OBJECT-TYPE | |||
| INTEGER | seconds0(1), seconds5(2), seconds10(3), seconds15(4), seconds20(5), seconds25(6), seconds30(7), seconds35(8) | ||
| bqlConfig1Table | 1.3.6.1.4.1.498.10.4 | ||
| The GDC SC616, DC610, DC612 2B1Q configuration 1 table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlConfig1Entry | |||
| bqlConfig1Entry | 1.3.6.1.4.1.498.10.4.1 | ||
| A listing of GDC 2B1Q SC616 options. | |||
| OBJECT-TYPE | |||
| BqlConfig1Entry | |||
| bqlConfig1Index | 1.3.6.1.4.1.498.10.4.1.1 | ||
| A unique index for the Configuration Table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlFrontPanel | 1.3.6.1.4.1.498.10.4.1.2 | ||
| Object used to enable or disable the units front panel switches. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| bqlSoftHard | 1.3.6.1.4.1.498.10.4.1.3 | ||
| Object used to read how the unit is configured. | |||
| OBJECT-TYPE | |||
| INTEGER | hardmode(1), softmode(2) | ||
| bqlDteStatus | 1.3.6.1.4.1.498.10.4.1.4 | ||
| Object used to read the status of the DTE interface. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| bqlConfig2Table | 1.3.6.1.4.1.498.10.5 | ||
| The GDC SC616 2B1Q configuration 2 table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlConfig2Entry | |||
| bqlConfig2Entry | 1.3.6.1.4.1.498.10.5.1 | ||
| A listing of GDC 2B1Q SC616 options. | |||
| OBJECT-TYPE | |||
| BqlConfig2Entry | |||
| bqlConfig2Index | 1.3.6.1.4.1.498.10.5.1.1 | ||
| A unique index for the Configuration Table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlMasterTXClkSrc | 1.3.6.1.4.1.498.10.5.1.2 | ||
| Object to option the Loop master transmit clock source. This is for the SC616 only. | |||
| OBJECT-TYPE | |||
| INTEGER | xtc1(1), xtc2(2) | ||
| bqlDiagnosticTable | 1.3.6.1.4.1.498.10.6 | ||
| The GDC SC616 diagnostics table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlDiagnosticEntry | |||
| bqlDiagnosticEntry | 1.3.6.1.4.1.498.10.6.1 | ||
| A listing of GDC SC616 diagnostic tests | |||
| OBJECT-TYPE | |||
| BqlDiagnosticEntry | |||
| bqlDiagnosticIndex | 1.3.6.1.4.1.498.10.6.1.1 | ||
| A unique index for the Diagnostic Table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlDiagnosticChnlIndex | 1.3.6.1.4.1.498.10.6.1.2 | ||
| A unique channel index for the Channel the test will run on. | |||
| OBJECT-TYPE | |||
| INTEGER | channel1(1), channel2(2) | ||
| bqlDiagnosticTest | 1.3.6.1.4.1.498.10.6.1.3 | ||
| This function selects or reads the test. 0 = no test currently operating 1 = remote loopback test 2 = channel loopback test 4 = data loopback test 8 = selftest 16 = line loopback test 32 = terminate test All other values are test combinations such as 9 = selftest and remote loopback. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..63 | ||
| bqlDiagnosticLength | 1.3.6.1.4.1.498.10.6.1.4 | ||
| This function selects the test time length. Where 0 is test indefinitely and 1 to 127 are seconds. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..127 | ||
| bqlDiagnosticActive | 1.3.6.1.4.1.498.10.6.1.5 | ||
| This function represents the test condition. | |||
| OBJECT-TYPE | |||
| INTEGER | notActive(1), active(2) | ||
| bqlDiagnosticResults | 1.3.6.1.4.1.498.10.6.1.6 | ||
| This function reads the self test results in bit errors. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..16383 | ||
| bqlSC616Alarm | 1.3.6.1.4.1.498.10.7 | ||
| OBJECT IDENTIFIER | |||
| bqlAlarmData | 1.3.6.1.4.1.498.10.7.1 | ||
| OBJECT IDENTIFIER | |||
| bqlNoResponseAlm | 1.3.6.1.4.1.498.10.7.1.1 | ||
| OBJECT IDENTIFIER | |||
| bqlDiagRxErrAlm | 1.3.6.1.4.1.498.10.7.1.2 | ||
| OBJECT IDENTIFIER | |||
| bqlPowerUpAlm | 1.3.6.1.4.1.498.10.7.1.3 | ||
| OBJECT IDENTIFIER | |||
| bqlLp2B1QOutofSyncAlm | 1.3.6.1.4.1.498.10.7.1.4 | ||
| OBJECT IDENTIFIER | |||
| bqlLpChn1ElasBufrOverUnderFlowAlm | 1.3.6.1.4.1.498.10.7.1.5 | ||
| OBJECT IDENTIFIER | |||
| bqlLpChn2ElasBufrOverUnderFlowAlm | 1.3.6.1.4.1.498.10.7.1.6 | ||
| OBJECT IDENTIFIER | |||
| bqlLpChn1ExtTxClkAlm | 1.3.6.1.4.1.498.10.7.1.7 | ||
| OBJECT IDENTIFIER | |||
| bqlLpChn2ExtTxClkAlm | 1.3.6.1.4.1.498.10.7.1.8 | ||
| OBJECT IDENTIFIER | |||
| bqlLpSealingCurrentNoContinuityAlm | 1.3.6.1.4.1.498.10.7.1.9 | ||
| OBJECT IDENTIFIER | |||
| bqlSC616LEDStatusTable | 1.3.6.1.4.1.498.10.8 | ||
| The GDC SC616 LED Status Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlSC616LEDEntry | |||
| bqlSC616LEDEntry | 1.3.6.1.4.1.498.10.8.1 | ||
| An entry in the GDC SC616 LED Status table. | |||
| OBJECT-TYPE | |||
| BqlSC616LEDEntry | |||
| bqlSC616LEDIndex | 1.3.6.1.4.1.498.10.8.1.1 | ||
| This object is the index of the SC616 LED Status table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlSC616LEDStatus | 1.3.6.1.4.1.498.10.8.1.2 | ||
| The GDC SC616 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - alarm on 1.4 - loop 1 line loopback 1.3 - loop 1 channel 1 send data transitions 1.2 - loop 1 channel 1 receive data transitions 1.1 - loop 1 channel 2 send data transitions 1.0 - loop 1 channel 2 receive data transitions 2.7 - not used 2.6 - not used 2.5 - not used 2.4 - loop 2 line loopback 2.3 - loop 2 channel 1 send data transitions 2.2 - loop 2 channel 1 receive data transitions 2.1 - loop 2 channel 2 send data transitions 2.0 - loop 2 channel 2 receive data transitions 3.7 - not used 3.6 - not used 3.5 - not used 3.4 - loop 3 line loopback 3.3 - loop 3 channel 1 send data transitions 3.2 - loop 3 channel 1 receive data transitions 3.1 - loop 3 channel 2 send data transitions 3.0 - loop 3 channel 2 receive data transitions | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(3) | ||
| bqlDC610Alarm | 1.3.6.1.4.1.498.10.9 | ||
| OBJECT IDENTIFIER | |||
| bqlDC610AlarmData | 1.3.6.1.4.1.498.10.9.1 | ||
| OBJECT IDENTIFIER | |||
| bqlDC610PowerUpAlm | 1.3.6.1.4.1.498.10.9.1.1 | ||
| OBJECT IDENTIFIER | |||
| bqlDC610Chnl1DTRAlm | 1.3.6.1.4.1.498.10.9.1.2 | ||
| OBJECT IDENTIFIER | |||
| bqlDC610NoResponseAlm | 1.3.6.1.4.1.498.10.9.1.3 | ||
| OBJECT IDENTIFIER | |||
| bqlDC610DiagRxErrAlm | 1.3.6.1.4.1.498.10.9.1.4 | ||
| OBJECT IDENTIFIER | |||
| bqlDC610LEDStatusTable | 1.3.6.1.4.1.498.10.10 | ||
| The GDC DC610 LED Status Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlDC610LEDEntry | |||
| bqlDC610LEDEntry | 1.3.6.1.4.1.498.10.10.1 | ||
| An entry in the GDC DC610 LED Status table. | |||
| OBJECT-TYPE | |||
| BqlDC610LEDEntry | |||
| bqlDC610LEDIndex | 1.3.6.1.4.1.498.10.10.1.1 | ||
| This object is the index of the DC610 LED Status table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlDC610LEDStatus | 1.3.6.1.4.1.498.10.10.1.2 | ||
| The GDC DC610 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - sync 1.4 - request to send 1.3 - clear to send 1.2 - carrier on 1.1 - send data transitions 1.0 - receive data transitions | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| bqlDC612Alarm | 1.3.6.1.4.1.498.10.11 | ||
| OBJECT IDENTIFIER | |||
| bqlDC612AlarmData | 1.3.6.1.4.1.498.10.11.1 | ||
| OBJECT IDENTIFIER | |||
| bqlDC612PowerUpAlm | 1.3.6.1.4.1.498.10.11.1.1 | ||
| OBJECT IDENTIFIER | |||
| bqlDC612Chnl1DTRAlm | 1.3.6.1.4.1.498.10.11.1.2 | ||
| OBJECT IDENTIFIER | |||
| bqlDC612Chnl2DTRAlm | 1.3.6.1.4.1.498.10.11.1.3 | ||
| OBJECT IDENTIFIER | |||
| bqlDC612NoResponseAlm | 1.3.6.1.4.1.498.10.11.1.4 | ||
| OBJECT IDENTIFIER | |||
| bqlDC612DiagRxErrAlm | 1.3.6.1.4.1.498.10.11.1.5 | ||
| OBJECT IDENTIFIER | |||
| bqlDC612LEDStatusTable | 1.3.6.1.4.1.498.10.12 | ||
| The GDC DC612 LED Status Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlDC612LEDEntry | |||
| bqlDC612LEDEntry | 1.3.6.1.4.1.498.10.12.1 | ||
| An entry in the GDC DC612 LED Status table. | |||
| OBJECT-TYPE | |||
| BqlDC612LEDEntry | |||
| bqlDC612LEDIndex | 1.3.6.1.4.1.498.10.12.1.1 | ||
| This object is the index of the DC612 LED Status table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlDC612LEDStatus | 1.3.6.1.4.1.498.10.12.1.2 | ||
| The GDC DC612 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - not used 1.5 - not used 1.4 - not used 1.3 - not used 1.2 - not used 1.1 - channel 1 selected for front panel pushbutton operation 1.0 - channel 2 selected for front panel pushbutton operation 2.7 - not used 2.6 - channel 1 test mode 2.5 - channel 1 sync 2.4 - channel 1 request to send 2.3 - channel 1 clear to send 2.2 - channel 1 carrier on 2.1 - channel 1 send data transitions 2.0 - channel 1 receive data transitions 3.7 - not used 3.6 - channel 2 test mode 3.5 - channel 2 sync 3.4 - channel 2 request to send 3.3 - channel 2 clear to send 3.2 - channel 2 carrier on 3.1 - channel 2 send data transitions 3.0 - channel 2 receive data transitionscd | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(3) | ||
| bqlControlTable | 1.3.6.1.4.1.498.10.13 | ||
| The GDC SC616 Control Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlControlEntry | |||
| bqlControlEntry | 1.3.6.1.4.1.498.10.13.1 | ||
| An entry in the GDC SC616 Control table. | |||
| OBJECT-TYPE | |||
| BqlControlEntry | |||
| bqlControlIndex | 1.3.6.1.4.1.498.10.13.1.1 | ||
| This object is the identifier of the SC616 Control table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlSoftReset | 1.3.6.1.4.1.498.10.13.1.2 | ||
| Forces a soft reset on the network element. The reset selection is write only. The normal selection is read only. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(1), reset(2) | ||
| bqlEraseConfig | 1.3.6.1.4.1.498.10.13.1.3 | ||
| Forces an erase of the stored configuration in the network element. The erase selection is write only. The normal selection is read only. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(1), erase(2) | ||
| bqlCurrentTable | 1.3.6.1.4.1.498.10.14 | ||
| The SC616 Current table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlCurrentEntry | |||
| bqlCurrentEntry | 1.3.6.1.4.1.498.10.14.1 | ||
| An entry in the SC616 Current table. | |||
| OBJECT-TYPE | |||
| BqlCurrentEntry | |||
| bqlCurrentIndex | 1.3.6.1.4.1.498.10.14.1.1 | ||
| The index value which uniquely identifies the SC616 DC610 or DC612 interface to which this entry is applicable. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlCurrentESs | 1.3.6.1.4.1.498.10.14.1.2 | ||
| The number of Errored Seconds, encountered by an ISDN interface in the current 15 minute interval. This is defined as a second with at least one CRC error event or one or more out of frames (OOF). | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlCurrentBESs | 1.3.6.1.4.1.498.10.14.1.3 | ||
| The number of Bursty Errored Seconds (BESs) encountered by an ISDN interface in the current 15 minute interval. This is defined as a second with more than one but less than 640 CRC error events. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlCurrentSESs | 1.3.6.1.4.1.498.10.14.1.4 | ||
| The number of Severely Errored Seconds encoun- tered by an ISDN interface in the current 15 minute interval. This is defined as a second with 640 or more CRC error events or one or more out of frames (OOF). | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlCurrentUASs | 1.3.6.1.4.1.498.10.14.1.5 | ||
| The number of Unavailable Seconds encountered by an ISDN interface in the current 15 minute interval. This is a count of one-second intervals during which service is not available. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlCurrentStats | 1.3.6.1.4.1.498.10.14.1.6 | ||
| The number of ES, BES, ESE and UAS encountered by an ISDN interface in the current 15 minute interval. This is a count of one-second intervals during which service is not available. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(12) | ||
| bqlIntervalTable | 1.3.6.1.4.1.498.10.15 | ||
| The SC616 Interval table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlIntervalEntry | |||
| bqlIntervalEntry | 1.3.6.1.4.1.498.10.15.1 | ||
| An entry in the SC616 Interval table. | |||
| OBJECT-TYPE | |||
| BqlIntervalEntry | |||
| bqlIntervalIndex | 1.3.6.1.4.1.498.10.15.1.1 | ||
| The index value which uniquely identifies the ISDN interface to which this entry is applicable. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlIntervalNumber | 1.3.6.1.4.1.498.10.15.1.2 | ||
| A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minute inter- val (assuming that all 96 intervals are valid). | |||
| OBJECT-TYPE | |||
| INTEGER | 1..96 | ||
| bqlIntervalESs | 1.3.6.1.4.1.498.10.15.1.3 | ||
| The number of Errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. This is defined as a second with at least one CRC error event or one or more out of frames (OOF). | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlIntervalBESs | 1.3.6.1.4.1.498.10.15.1.4 | ||
| The number of Bursty Errored Seconds (BESs) encountered by an ISDN interface in one of the previous 96, individual 15 minute, intervals. This is defined as a second with more than one but less than 640 CRC error events. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlIntervalSESs | 1.3.6.1.4.1.498.10.15.1.5 | ||
| The number of Severely Errored Seconds encoun- tered by an ISDN interface in one of the previous 96, individual 15 minute, intervals. This is defined as a second with 640 or more CRC error events or one or more out of frames (OOF). | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlIntervalUASs | 1.3.6.1.4.1.498.10.15.1.6 | ||
| The number of Unavailable Seconds encountered by an ISDN interface in one of the previous 96, individual 15 minute, intervals. This is a count of one-second intervals during which service is not available. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlIntervalStats | 1.3.6.1.4.1.498.10.15.1.7 | ||
| The number of ES, BES, SES, and UAS encountered by an ISDN interface in one of the previous 96, individual 15 minute, intervals. This is a count of one-second intervals during which service is not available. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(12) | ||
| bqlTotalTable | 1.3.6.1.4.1.498.10.16 | ||
| The SC616 Total table. 24 hour interval. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlTotalEntry | |||
| bqlTotalEntry | 1.3.6.1.4.1.498.10.16.1 | ||
| An entry in the SC616 Total table. | |||
| OBJECT-TYPE | |||
| BqlTotalEntry | |||
| bqlTotalIndex | 1.3.6.1.4.1.498.10.16.1.1 | ||
| The index value which uniquely identifies the ISDN interface to which this entry is applicable. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlTotalESs | 1.3.6.1.4.1.498.10.16.1.2 | ||
| The number of Errored Seconds encountered by an ISDN interface in the previous 24 hour interval. This is defined as a second with at least one CRC error event or one or more out of frames (OOF). | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlTotalBESs | 1.3.6.1.4.1.498.10.16.1.3 | ||
| The number of Bursty Errored Seconds (BESs) encountered by an ISDN interface in the previous 24 hour interval. This is defined as a second with more than one but less than 640 CRC error events. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlTotalSESs | 1.3.6.1.4.1.498.10.16.1.4 | ||
| The number of Severely Errored Seconds encoun- tered by an ISDN interface in the previous 24 hour interval. This is defined as a second with 640 or more CRC error events or one or more out of frames (OOF). | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlTotalUASs | 1.3.6.1.4.1.498.10.16.1.5 | ||
| The number of Unavailable Seconds encountered by an ISDN interface in the previous 24 hour interval. This is a count of one-second intervals during which service is not available. | |||
| OBJECT-TYPE | |||
| Gauge | |||
| bqlTotalStats | 1.3.6.1.4.1.498.10.16.1.6 | ||
| The number of ES, BES, SES and UAS encountered by an ISDN interface in the previous 24 hour interval. This is a count of one-second intervals during which service is not available. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(12) | ||
| bqlDTERateTable | 1.3.6.1.4.1.498.10.17 | ||
| The DC610 DC612 DTE rate table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlDTEEntry | |||
| bqlDTEEntry | 1.3.6.1.4.1.498.10.17.1 | ||
| An entry in the DC610 DC612 table. | |||
| OBJECT-TYPE | |||
| BqlDTEEntry | |||
| bqlDTEIndex | 1.3.6.1.4.1.498.10.17.1.1 | ||
| The index value which uniquely identifies the DC610 DC612 interface to which this entry is applicable. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlDTE2Mapped | 1.3.6.1.4.1.498.10.17.1.2 | ||
| Forces a DC612 to map DTE channel 2 into channel 2 or channel 1. | |||
| OBJECT-TYPE | |||
| INTEGER | toChannel2(1), toChannel1(2) | ||
| bqlDTE2DataRate | 1.3.6.1.4.1.498.10.17.1.3 | ||
| Forces a DC612 DTE channel 2 to a K bit per second rate. | |||
| OBJECT-TYPE | |||
| INTEGER | kBps2400(1), kBps4800(2), kBps9600(3), kBps19200(4), kBps38400(5), kBps48000(6), kBps56000(7), kBps57600(8), kBps64000(9), kBps128000(10) | ||
| bqlDTE1Mapped | 1.3.6.1.4.1.498.10.17.1.4 | ||
| Forces a DC610 or DC612 to map DTE channel 1 into channel 1 or channel 2. | |||
| OBJECT-TYPE | |||
| INTEGER | toChannel1(1), toChannel2(2) | ||
| bqlDTE1DataRate | 1.3.6.1.4.1.498.10.17.1.5 | ||
| Forces a DC610 or DC612 DTE channel 1 to a K bit per second rate. | |||
| OBJECT-TYPE | |||
| INTEGER | kBps2400(1), kBps4800(2), kBps9600(3), kBps19200(4), kBps38400(5), kBps48000(6), kBps56000(7), kBps57600(8), kBps64000(9), kBps128000(10) | ||
| bqlIntervalMaintenanceTable | 1.3.6.1.4.1.498.10.18 | ||
| The SC616, DC610, DC612 Loop Interval Maintenance table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlIntervalMaintenanceEntry | |||
| bqlIntervalMaintenanceEntry | 1.3.6.1.4.1.498.10.18.1 | ||
| The SC616, DC610, DC612 Interval Maintenance table entry. | |||
| OBJECT-TYPE | |||
| BqlIntervalMaintenanceEntry | |||
| bqlIntervalMaintenanceIndex | 1.3.6.1.4.1.498.10.18.1.1 | ||
| The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface, which in this case is a Loop interface. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlResetIntervals | 1.3.6.1.4.1.498.10.18.1.2 | ||
| This variable is used to reset Loop performance intervals. When it is set to reset, the Loop performance tables are reset to zero. | |||
| OBJECT-TYPE | |||
| INTEGER | norm(1), reset(2) | ||
| bqlNumberofValidIntervals | 1.3.6.1.4.1.498.10.18.1.3 | ||
| This variable is used to read the number of intervals collected. Each interval is an increment of 15 minutes. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..96 | ||
| bqlDC610LEDStatusNZTable | 1.3.6.1.4.1.498.10.19 | ||
| The GDC DC610NZ LED Status Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlDC610LEDNZEntry | |||
| bqlDC610LEDNZEntry | 1.3.6.1.4.1.498.10.19.1 | ||
| An entry in the GDC DC610NZ LED Status table. | |||
| OBJECT-TYPE | |||
| BqlDC610LEDNZEntry | |||
| bqlDC610LEDNZIndex | 1.3.6.1.4.1.498.10.19.1.1 | ||
| This object is the index of the DC610 LED Status table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlDC610LEDNZStatus | 1.3.6.1.4.1.498.10.19.1.2 | ||
| The GDC DC610NZ front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - 128K (sync ) 1.4 - request to send 1.3 - clear to send 1.2 - network available (carrier on) 1.1 - send data transitions 1.0 - receive data transitions | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1) | ||
| bqlGT128Alarm | 1.3.6.1.4.1.498.10.20 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128AlarmData | 1.3.6.1.4.1.498.10.20.1 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128NoResponseAlm | 1.3.6.1.4.1.498.10.20.1.1 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128DiagRxErrAlm | 1.3.6.1.4.1.498.10.20.1.2 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128PowerUpAlm | 1.3.6.1.4.1.498.10.20.1.3 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128Chnl1DTRAlm | 1.3.6.1.4.1.498.10.20.1.4 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128LEDStatusTable | 1.3.6.1.4.1.498.10.21 | ||
| The GDC GT 128 LED Status Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlGT128LEDEntry | |||
| bqlGT128LEDEntry | 1.3.6.1.4.1.498.10.21.1 | ||
| An entry in the GDC GT128 LED Status table. | |||
| OBJECT-TYPE | |||
| BqlGT128LEDEntry | |||
| bqlGT128LEDIndex | 1.3.6.1.4.1.498.10.21.1.1 | ||
| This object is the index of the GT 128 LED Status table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlGT128LEDStatus | 1.3.6.1.4.1.498.10.21.1.2 | ||
| The GDC GT128 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - sync 1.4 - request to send 1.3 - clear to send 1.2 - carrier on 1.1 - send data transitions 1.0 - receive data transitions 2.6 - fu 2.5 - fu 2.4 - fu 2.3 - fu 2.2 - remote loopback ON 2.1 - selftest ON 2.0 - line loopback ON | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| bqlGT128NZAlarm | 1.3.6.1.4.1.498.10.22 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128NZAlarmData | 1.3.6.1.4.1.498.10.22.1 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128NZNoResponseAlm | 1.3.6.1.4.1.498.10.22.1.1 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128NZDiagRxErrAlm | 1.3.6.1.4.1.498.10.22.1.2 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128NZPowerUpAlm | 1.3.6.1.4.1.498.10.22.1.3 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128NZChnl1DTRAlm | 1.3.6.1.4.1.498.10.22.1.4 | ||
| OBJECT IDENTIFIER | |||
| bqlGT128LEDNZStatusTable | 1.3.6.1.4.1.498.10.23 | ||
| The GDC GT 128 NZ LED Status Table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| BqlGT128LEDNZEntry | |||
| bqlGT128LEDNZEntry | 1.3.6.1.4.1.498.10.23.1 | ||
| An entry in the GDC GT128 NZ LED Status table. | |||
| OBJECT-TYPE | |||
| BqlGT128LEDNZEntry | |||
| bqlGT128LEDNZIndex | 1.3.6.1.4.1.498.10.23.1.1 | ||
| This object is the index of the GT 128 NZ LED Status table. | |||
| OBJECT-TYPE | |||
| SCinstance | |||
| bqlGT128LEDNZStatus | 1.3.6.1.4.1.498.10.23.1.2 | ||
| The GDC GT128 NZ front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - 128K (sync) 1.4 - request to send 1.3 - clear to send 1.2 - network available (carrier on) 1.1 - send data transitions 1.0 - receive data transitions 2.6 - fu 2.5 - fu 2.4 - fu 2.3 - fu 2.2 - remote loopback ON 2.1 - selftest ON 2.0 - line loopback ON | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(2) | ||
| BqlWhatAreYouEntry | |||
| SEQUENCE | |||
| SCinstance as bqlWhatAreYouIndex | |||
| INTEGER as bqlBaseCardType | |||
| INTEGER as bqlOptionCard | |||
| INTEGER as bqlDTE2CardType | |||
| INTEGER as bqlDTE1CardType | |||
| DisplayString as bqlCodeRev | |||
| OCTET STRING as bqlAlarmStatus | |||
| BqlConfigEntry | |||
| SEQUENCE | |||
| SCinstance as bqlConfigIndex | |||
| INTEGER as bqlConfigChnlIndex | |||
| INTEGER as bqlTestPattern | |||
| INTEGER as bqlRLTimeout | |||
| INTEGER as bqlRespRL | |||
| INTEGER as bqlRLType | |||
| INTEGER as bqlBilateralRL | |||
| INTEGER as bqlInbandRTSDCD | |||
| INTEGER as bqlRTS | |||
| INTEGER as bqlRTSCTSDelay | |||
| INTEGER as bqlAntiStream | |||
| INTEGER as bqlTXDataElasticBufr | |||
| INTEGER as bqlRTSCTSDelayTime | |||
| INTEGER as bqlAntiStreamTime | |||
| BqlConfig1Entry | |||
| SEQUENCE | |||
| SCinstance as bqlConfig1Index | |||
| INTEGER as bqlFrontPanel | |||
| INTEGER as bqlSoftHard | |||
| OCTET STRING as bqlDteStatus | |||
| BqlConfig2Entry | |||
| SEQUENCE | |||
| SCinstance as bqlConfig2Index | |||
| INTEGER as bqlMasterTXClkSrc | |||
| BqlDiagnosticEntry | |||
| SEQUENCE | |||
| SCinstance as bqlDiagnosticIndex | |||
| INTEGER as bqlDiagnosticChnlIndex | |||
| INTEGER as bqlDiagnosticTest | |||
| INTEGER as bqlDiagnosticLength | |||
| INTEGER as bqlDiagnosticActive | |||
| INTEGER as bqlDiagnosticResults | |||
| BqlSC616LEDEntry | |||
| SEQUENCE | |||
| SCinstance as bqlSC616LEDIndex | |||
| OCTET STRING as bqlSC616LEDStatus | |||
| BqlDC610LEDEntry | |||
| SEQUENCE | |||
| SCinstance as bqlDC610LEDIndex | |||
| OCTET STRING as bqlDC610LEDStatus | |||
| BqlDC612LEDEntry | |||
| SEQUENCE | |||
| SCinstance as bqlDC612LEDIndex | |||
| OCTET STRING as bqlDC612LEDStatus | |||
| BqlControlEntry | |||
| SEQUENCE | |||
| SCinstance as bqlControlIndex | |||
| INTEGER as bqlSoftReset | |||
| INTEGER as bqlEraseConfig | |||
| BqlCurrentEntry | |||
| SEQUENCE | |||
| SCinstance as bqlCurrentIndex | |||
| Gauge as bqlCurrentESs | |||
| Gauge as bqlCurrentBESs | |||
| Gauge as bqlCurrentSESs | |||
| Gauge as bqlCurrentUASs | |||
| OCTET STRING as bqlCurrentStats | |||
| BqlIntervalEntry | |||
| SEQUENCE | |||
| SCinstance as bqlIntervalIndex | |||
| INTEGER as bqlIntervalNumber | |||
| Gauge as bqlIntervalESs | |||
| Gauge as bqlIntervalBESs | |||
| Gauge as bqlIntervalSESs | |||
| Gauge as bqlIntervalUASs | |||
| OCTET STRING as bqlIntervalStats | |||
| BqlTotalEntry | |||
| SEQUENCE | |||
| SCinstance as bqlTotalIndex | |||
| Gauge as bqlTotalESs | |||
| Gauge as bqlTotalBESs | |||
| Gauge as bqlTotalSESs | |||
| Gauge as bqlTotalUASs | |||
| OCTET STRING as bqlTotalStats | |||
| BqlDTEEntry | |||
| SEQUENCE | |||
| SCinstance as bqlDTEIndex | |||
| INTEGER as bqlDTE2Mapped | |||
| INTEGER as bqlDTE2DataRate | |||
| INTEGER as bqlDTE1Mapped | |||
| INTEGER as bqlDTE1DataRate | |||
| BqlIntervalMaintenanceEntry | |||
| SEQUENCE | |||
| SCinstance as bqlIntervalMaintenanceIndex | |||
| INTEGER as bqlResetIntervals | |||
| INTEGER as bqlNumberofValidIntervals | |||
| BqlDC610LEDNZEntry | |||
| SEQUENCE | |||
| SCinstance as bqlDC610LEDNZIndex | |||
| OCTET STRING as bqlDC610LEDNZStatus | |||
| BqlGT128LEDEntry | |||
| SEQUENCE | |||
| SCinstance as bqlGT128LEDIndex | |||
| OCTET STRING as bqlGT128LEDStatus | |||
| BqlGT128LEDNZEntry | |||
| SEQUENCE | |||
| SCinstance as bqlGT128LEDNZIndex | |||
| OCTET STRING as bqlGT128LEDNZStatus | |||