HDR2-MIB

File: HDR2-MIB.mib (22749 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises DisplayString OBJECT-TYPE

Defined Objects

usr 1.3.6.1.4.1.429
OBJECT IDENTIFIER    

common 1.3.6.1.4.1.429.4
OBJECT IDENTIFIER    

hdr2 1.3.6.1.4.1.429.4.48
OBJECT IDENTIFIER    

hdr2Cfg 1.3.6.1.4.1.429.4.48.1
OBJECT IDENTIFIER    

hdr2CfgTable 1.3.6.1.4.1.429.4.48.1.1
A table containing the configuration parameters for the Hiper E1/R2 Card.
OBJECT-TYPE    
  SEQUENCE OF  
    Hdr2CfgEntry

hdr2CfgEntry 1.3.6.1.4.1.429.4.48.1.1.1
Configuration parameters for the E1/R2 module.
OBJECT-TYPE    
  Hdr2CfgEntry  

hdr2CfgIndex 1.3.6.1.4.1.429.4.48.1.1.1.1
The index which uniquely identifies the Hiper E1/R2 CARD to which this entry is applicable.
OBJECT-TYPE    
  INTEGER  

hdr2CfgRegSigType 1.3.6.1.4.1.429.4.48.1.1.1.2
This object Defines the type of Register Signaling used for Bit Oriented Signaling.
OBJECT-TYPE    
  INTEGER r2MFC(1), r2MFSC(2)  

hdr2CfgAnumIden 1.3.6.1.4.1.429.4.48.1.1.1.3
This parameter enables or disables the collection of calling party ( A party or ANI) phone numbers when used with R2MFC signaling type.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgForcedRel 1.3.6.1.4.1.429.4.48.1.1.1.4
In E1/ R2 ,Forced Release Line signal will be sent only in case of this parameter is enabled. This signal is optional.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgLastBDigTout 1.3.6.1.4.1.429.4.48.1.1.1.5
This parameter decides, after how many milliseconds of silence during the B digit reception, the B party number is assumed as completed.
OBJECT-TYPE    
  INTEGER 100..10000  

hdr2CfgAddrComplete 1.3.6.1.4.1.429.4.48.1.1.1.6
On reception of this signal it is assumed that the required number of B party digits are received. It can hold the values ranging from A1 to A15. It depends on country specification.
OBJECT-TYPE    
  INTEGER a3(1), a5(2), a6(3)  

hdr2CfgEndBparty 1.3.6.1.4.1.429.4.48.1.1.1.7
This indicates whether I15 is will be received as an indication for End of B party number or not. If enabled, at the end of B party number , this I15 signal is received informing that B party number is completed.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgAlawMulaw 1.3.6.1.4.1.429.4.48.1.1.1.8
This object is configuration to apply A Law(E1) or MuLaw(T1) Companding.
OBJECT-TYPE    
  INTEGER aLAW(1), mULAW(2), auto(3)  

hdr2CfgLineSigType 1.3.6.1.4.1.429.4.48.1.1.1.9
This object defines the type of Line Signaling for Bit Oriented Signaling.
OBJECT-TYPE    
  INTEGER r2DIG(1), p7DIG(2), r2EandM(3)  

hdr2CfgProjID 1.3.6.1.4.1.429.4.48.1.1.1.10
Depending on this parameter, country dependent or project dependent parameters are updated. Each and every parameter has a set of variables to be initialized.
OBJECT-TYPE    
  INTEGER iTU-T(1), argentina(2), australia(3), brazil(4), chile(5), china(6), colombia(7), india(8), korea(9), malaysia(10), mexico(11), newZealand(12), philippines(13), sweden(14), venezuela(15)  

hdr2CfgSeizeAck 1.3.6.1.4.1.429.4.48.1.1.1.11
It defines whether seize acknowledge signal is used or not for Bit Oriented Signaling.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgAnumBnum 1.3.6.1.4.1.429.4.48.1.1.1.12
During Bit oriented Register Signaling , after number of B party ( called party or DNIS) digits have been received, the A party (calling or ANI) digits are requested , provided A party (ANI) request is enabled. Otherwise this parameter is ignored.
OBJECT-TYPE    
  INTEGER 1..36  

hdr2CfgSubBusy 1.3.6.1.4.1.429.4.48.1.1.1.13
This object is used in case of subscirber busy.
OBJECT-TYPE    
  INTEGER b2(1), b3(2)  

hdr2CfgSndCallingPtyCatgy 1.3.6.1.4.1.429.4.48.1.1.1.14
This register Signal requests the calling ( A PARTY's ) category.
OBJECT-TYPE    
  INTEGER a5(1), a6(2)  

hdr2CfgLineDirection 1.3.6.1.4.1.429.4.48.1.1.1.15
This object sets the direction of the channels on the span line.
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2), both(3)  

hdr2CfgPersistentOverride 1.3.6.1.4.1.429.4.48.1.1.1.16
This object allows the recieved line signal persistence (debounce time).
OBJECT-TYPE    
  INTEGER 0..255  

hdr2CfgWrongNumber 1.3.6.1.4.1.429.4.48.1.1.1.17
This object is the backward register signal used to indicate that an invalid number has been dialed.
OBJECT-TYPE    
  INTEGER b5(1), b7(2)  

hdr2CfgIncomingCpc 1.3.6.1.4.1.429.4.48.1.1.1.18
This object determines the default calling party category to be assumed when none is supplied for an incoming call.
OBJECT-TYPE    
  INTEGER analog(1), digital(2), maintanace(3), test(4)  

hdr2CfgRegSigStatus 1.3.6.1.4.1.429.4.48.1.1.1.19
This object determines whether or not register signalling is used for incoming and outgoing calls for R2.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgUnusedAbcd 1.3.6.1.4.1.429.4.48.1.1.1.20
This object determines the bit pattern transmitted for whichever of the ABCD bits are not used for the selected line signalling scheme. This means CD for R2 Digital and P7, and BCD for R2 E&M.
OBJECT-TYPE    
  INTEGER 0..15  

hdr2CfgBlkToBlk 1.3.6.1.4.1.429.4.48.1.1.1.21
This object determines whether or not a blocking signals received in the idle state is automatically responded to with a transmitted block signals.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgDelayLos 1.3.6.1.4.1.429.4.48.1.1.1.22
This object determines the required duration of the LOS state before active calls are dropped and the signalling is reinitialised. Restoration of signal during this period allows calls to continue.
OBJECT-TYPE    
  INTEGER 0..10000  

hdr2CfgInGlare 1.3.6.1.4.1.429.4.48.1.1.1.23
This object determines whether the incoming call is accepted and the outgoing call is dropped in a glare condition, or both calls are dropped as currently implemented.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgClrCall 1.3.6.1.4.1.429.4.48.1.1.1.24
This object determines whether an active call is cleared when an unexpected line signal is received, or the line signal is ignored as currently implemented.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgANumQry 1.3.6.1.4.1.429.4.48.1.1.1.25
This object determines whether or not an extra MFC cycle is used before to the A-number to indicate whether an A-number is available,using III-1 for yes and III-0 for no.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgANumNAv 1.3.6.1.4.1.429.4.48.1.1.1.26
THis object interpret I-12 as A-number not available.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgANumReq 1.3.6.1.4.1.429.4.48.1.1.1.27
this object backward register signal used to request transmission of the next A-number digit Frequently this is the same as the signal used to request transmission of the call category and A-number .
OBJECT-TYPE    
  INTEGER c1(1), c5(2), c6(3), c9(4)  

hdr2CfgClrFwd 1.3.6.1.4.1.429.4.48.1.1.1.28
This object repeatd size/clear-forward sequence is sent to startup to try to provoke a response from attached equipment.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgRelGuard 1.3.6.1.4.1.429.4.48.1.1.1.29
This object is duration for which Release Guard signal is sent.
OBJECT-TYPE    
  INTEGER 0..2000  

hdr2CfgPIClrBck 1.3.6.1.4.1.429.4.48.1.1.1.30
This object determines whether or not a repeated release/Seize-ack sequence is sent while attempting to clear anincoming call.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

hdr2CfgDelayAns 1.3.6.1.4.1.429.4.48.1.1.1.31
this object determines the delay between the end of addressing and transmission of the answer signal.
OBJECT-TYPE    
  INTEGER 100..2000  

hdr2CfgBNumLen 1.3.6.1.4.1.429.4.48.1.1.1.32
this object determines the number of B-number digits to accept beore sending the 'address complete'signal, provided the 'end of B_number'signal is not received first.
OBJECT-TYPE    
  INTEGER 1..36  

hdr2CfgActBTout 1.3.6.1.4.1.429.4.48.1.1.1.33
this object determines action to be taken on last B-digit timeout.
OBJECT-TYPE    
  INTEGER b-number(1), error(2)  

hdr2CfgInSubFree 1.3.6.1.4.1.429.4.48.1.1.1.34
this object backward register signal used to indicate acceptance of an incoming call.
OBJECT-TYPE    
  INTEGER b1(1), b5(2), b6(3)  

hdr2CfgBNumNFnd 1.3.6.1.4.1.429.4.48.1.1.1.35
this object determines the action on B-Number not found in teh DNIS handling table.
OBJECT-TYPE    
  INTEGER acceptAllCalls(1), rejectAllCalls(2), acceptAllCallsAsDigital(3), acceptAllCallsAnalog(4)  

hdr2CfgSndBNumN 1.3.6.1.4.1.429.4.48.1.1.1.36
this object backward signal requesting retransmission of curent B-number digit for outgoing calls.
OBJECT-TYPE    
  INTEGER a9(1), a10(2)  

hdr2CfgSndBNumN1 1.3.6.1.4.1.429.4.48.1.1.1.37
this object backward signal requesting transmission of B-number digit N-1 for outgoing calls.
OBJECT-TYPE    
  INTEGER a2(1), a8(2), a9(3), a10(4)  

hdr2CfgSndBNumN2 1.3.6.1.4.1.429.4.48.1.1.1.38
this object backward signal requesting transimission of B-number digit N-2 for outgoing calls.
OBJECT-TYPE    
  INTEGER a7(1), a9(2)  

hdr2CfgSndBNumN3 1.3.6.1.4.1.429.4.48.1.1.1.39
this object backward signal requesting transimission of B-number digit N-3 for outgoing calls.
OBJECT-TYPE    
  INTEGER a8(1), a10(2)  

hdr2CfgSndFBNum 1.3.6.1.4.1.429.4.48.1.1.1.40
this object determines whether or not the I-15 'end of B-number' signal is used for outgoing calls.
OBJECT-TYPE    
  INTEGER a2(1), a9(2), a10(3)  

hdr2CfgDumANum 1.3.6.1.4.1.429.4.48.1.1.1.41
this object default A-number for outgoing calls in case none is supplied during call initiation.
OBJECT-TYPE    
  DisplayString SIZE(1..36)  

hdr2CfgEndANum 1.3.6.1.4.1.429.4.48.1.1.1.42
This object forward register signal used to indicate that no more a_number digits are avaible.default=iii-15.
OBJECT-TYPE    
  INTEGER iii-12(1), iii-15(2)  

hdr2CfgOutCatAnalog 1.3.6.1.4.1.429.4.48.1.1.1.43
This object forward signals used to indicate the call category for outgoing calls.
OBJECT-TYPE    
  INTEGER ii-1(1), ii-2(2), ii-3(3), ii-4(4), ii-5(5), ii-6(6), ii-7(7), ii-8(8), ii-9(9), ii-10(10), ii-11(11), ii-12(12), ii-13(13), ii-14(14), ii-15(15)  

hdr2CfgOutCatDigital 1.3.6.1.4.1.429.4.48.1.1.1.44
OBJECT-TYPE    
  INTEGER ii-1(1), ii-2(2), ii-3(3), ii-4(4), ii-5(5), ii-6(6), ii-7(7), ii-8(8), ii-9(9), ii-10(10), ii-11(11), ii-12(12), ii-13(13), ii-14(14), ii-15(15)  

hdr2CfgOutCatTest 1.3.6.1.4.1.429.4.48.1.1.1.45
OBJECT-TYPE    
  INTEGER ii-1(1), ii-2(2), ii-3(3), ii-4(4), ii-5(5), ii-6(6), ii-7(7), ii-8(8), ii-9(9), ii-10(10), ii-11(11), ii-12(12), ii-13(13), ii-14(14), ii-15(15)  

hdr2CfgOutCatMaintenance 1.3.6.1.4.1.429.4.48.1.1.1.46
OBJECT-TYPE    
  INTEGER ii-1(1), ii-2(2), ii-3(3), ii-4(4), ii-5(5), ii-6(6), ii-7(7), ii-8(8), ii-9(9), ii-10(10), ii-11(11), ii-12(12), ii-13(13), ii-14(14), ii-15(15)  

hdr2InCatMap 1.3.6.1.4.1.429.4.48.2
OBJECT IDENTIFIER    

hdr2InCatMapTable 1.3.6.1.4.1.429.4.48.2.1
A table containing in cat map configurations for the Hiper E1/R2 Module.
OBJECT-TYPE    
  SEQUENCE OF  
    Hdr2InCatMapEntry

hdr2InCatMapEntry 1.3.6.1.4.1.429.4.48.2.1.1
Configuration parameters for the E1/R2 module.
OBJECT-TYPE    
  Hdr2InCatMapEntry  

hdr2InCatMapIndex 1.3.6.1.4.1.429.4.48.2.1.1.1
The index which uniquely identifies the Hiper E1/R2 Module to which this entry is applicable.
OBJECT-TYPE    
  INTEGER  

hdr2InCatMapSigNum 1.3.6.1.4.1.429.4.48.2.1.1.2
This object is the index for one of 15 possible forward call category signals for imcoming calls.
OBJECT-TYPE    
  INTEGER 1..15  

hdr2InCatMapCallType 1.3.6.1.4.1.429.4.48.2.1.1.3
This object determines the meaning of forward call category for incoming calls.
OBJECT-TYPE    
  INTEGER analog(1), digital(2), test(3), maintenance(4)  

hdr2Pte 1.3.6.1.4.1.429.4.48.3
OBJECT IDENTIFIER    

hdr2PteTable 1.3.6.1.4.1.429.4.48.3.1
A table containing the Positron Trap Enable configurations for the Hiper E1/R2 Module.
OBJECT-TYPE    
  SEQUENCE OF  
    Hdr2PteEntry

hdr2PteEntry 1.3.6.1.4.1.429.4.48.3.1.1
Trap Enable Configuration parameters for the E1/R2 module.
OBJECT-TYPE    
  Hdr2PteEntry  

hdr2PteIndex 1.3.6.1.4.1.429.4.48.3.1.1.1
The index which uniquely identifies the Hiper E1/R2 Module to which this entry is applicable.
OBJECT-TYPE    
  INTEGER  

hdr2PteMultiFrame 1.3.6.1.4.1.429.4.48.3.1.1.2
Enable the generation of an SNMP trap upon detection of a Multi-Frame Alignment condition on the specified DS1.
OBJECT-TYPE    
  INTEGER disableAll(1), enableTrapOnly(2), enableSysLogOnly(3), enableAll(4)  

hdr2PteMultiFrameClr 1.3.6.1.4.1.429.4.48.3.1.1.3
Enable the generation of an SNMP trap upon detection of clearing a Multi-Frame Alignment condition on the specified DS1.
OBJECT-TYPE    
  INTEGER disableAll(1), enableTrapOnly(2), enableSysLogOnly(3), enableAll(4)  

hdr2PteRemMultiFrame 1.3.6.1.4.1.429.4.48.3.1.1.4
Enable the generation of an SNMP trap upon detection of a Remote Multi-Frame Alignment condition on the specified DS1.
OBJECT-TYPE    
  INTEGER disableAll(1), enableTrapOnly(2), enableSysLogOnly(3), enableAll(4)  

hdr2PteRemMultiFrameClr 1.3.6.1.4.1.429.4.48.3.1.1.5
Enable the generation of an SNMP trap upon detection of clearing a Remote Multi-Frame Alignment condition on the specified DS1.
OBJECT-TYPE    
  INTEGER disableAll(1), enableTrapOnly(2), enableSysLogOnly(3), enableAll(4)  

hdr2Te 1.3.6.1.4.1.429.4.48.4
OBJECT IDENTIFIER    

hdr2TeTable 1.3.6.1.4.1.429.4.48.4.1
A table containing the Trap Enable configurations for the Hiper E1/R2 Module.
OBJECT-TYPE    
  SEQUENCE OF  
    Hdr2TeEntry

hdr2TeEntry 1.3.6.1.4.1.429.4.48.4.1.1
Trap Enable Configuration parameters for the E1/R2 module.
OBJECT-TYPE    
  Hdr2TeEntry  

hdr2TeIndex 1.3.6.1.4.1.429.4.48.4.1.1.1
The index which uniquely identifies the Hiper E1/R2 CARD to which this entry is applicable.
OBJECT-TYPE    
  INTEGER  

hdr2TeMultiFrame 1.3.6.1.4.1.429.4.48.4.1.1.2
Enable the generation of an SNMP trap upon detection of a Multi-Frame Alignment condition on the specified DS1.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

hdr2TeMultiFrameClr 1.3.6.1.4.1.429.4.48.4.1.1.3
Enable the generation of an SNMP trap upon detection of clearing a Multi-Frame Alignment condition on the specified DS1.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

hdr2TeRemMultiFrame 1.3.6.1.4.1.429.4.48.4.1.1.4
Enable the generation of an SNMP trap upon detection of a Remote Multi-Frame Alignment condition on the specified DS1.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

hdr2TeRemMultiFrameClr 1.3.6.1.4.1.429.4.48.4.1.1.5
Enable the generation of an SNMP trap upon detection of clearing a Remote Multi-Frame Alignment condition on the specified DS1.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

Defined Objects

Hdr2CfgEntry  
SEQUENCE    
  INTEGER as hdr2CfgIndex  
  INTEGER as hdr2CfgRegSigType  
  INTEGER as hdr2CfgAnumIden  
  INTEGER as hdr2CfgForcedRel  
  INTEGER as hdr2CfgLastBDigTout  
  INTEGER as hdr2CfgAddrComplete  
  INTEGER as hdr2CfgEndBparty  
  INTEGER as hdr2CfgAlawMulaw  
  INTEGER as hdr2CfgLineSigType  
  INTEGER as hdr2CfgProjID  
  INTEGER as hdr2CfgSeizeAck  
  INTEGER as hdr2CfgAnumBnum  
  INTEGER as hdr2CfgSubBusy  
  INTEGER as hdr2CfgSndCallingPtyCatgy  
  INTEGER as hdr2CfgLineDirection  
  INTEGER as hdr2CfgPersistentOverride  
  INTEGER as hdr2CfgWrongNumber  
  INTEGER as hdr2CfgIncomingCpc  
  INTEGER as hdr2CfgRegSigStatus  
  INTEGER as hdr2CfgUnusedAbcd  
  INTEGER as hdr2CfgBlkToBlk  
  INTEGER as hdr2CfgDelayLos  
  INTEGER as hdr2CfgInGlare  
  INTEGER as hdr2CfgClrCall  
  INTEGER as hdr2CfgANumQry  
  INTEGER as hdr2CfgANumNAv  
  INTEGER as hdr2CfgANumReq  
  INTEGER as hdr2CfgClrFwd  
  INTEGER as hdr2CfgRelGuard  
  INTEGER as hdr2CfgPIClrBck  
  INTEGER as hdr2CfgDelayAns  
  INTEGER as hdr2CfgBNumLen  
  INTEGER as hdr2CfgActBTout  
  INTEGER as hdr2CfgInSubFree  
  INTEGER as hdr2CfgBNumNFnd  
  INTEGER as hdr2CfgSndBNumN  
  INTEGER as hdr2CfgSndBNumN1  
  INTEGER as hdr2CfgSndBNumN2  
  INTEGER as hdr2CfgSndBNumN3  
  INTEGER as hdr2CfgSndFBNum  
  DisplayString as hdr2CfgDumANum  
  INTEGER as hdr2CfgEndANum  
  INTEGER as hdr2CfgOutCatAnalog  
  INTEGER as hdr2CfgOutCatDigital  
  INTEGER as hdr2CfgOutCatTest  
  INTEGER as hdr2CfgOutCatMaintenance  

Hdr2InCatMapEntry  
SEQUENCE    
  INTEGER as hdr2InCatMapIndex  
  INTEGER as hdr2InCatMapSigNum  
  INTEGER as hdr2InCatMapCallType  

Hdr2PteEntry  
SEQUENCE    
  INTEGER as hdr2PteIndex  
  INTEGER as hdr2PteMultiFrame  
  INTEGER as hdr2PteMultiFrameClr  
  INTEGER as hdr2PteRemMultiFrame  
  INTEGER as hdr2PteRemMultiFrameClr  

Hdr2TeEntry  
SEQUENCE    
  INTEGER as hdr2TeIndex  
  INTEGER as hdr2TeMultiFrame  
  INTEGER as hdr2TeMultiFrameClr  
  INTEGER as hdr2TeRemMultiFrame  
  INTEGER as hdr2TeRemMultiFrameClr