HHMSAGENT-MIB

File: HHMSAGENT-MIB.mib (75013 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

enterprises IpAddress OBJECT-TYPE
DisplayString TRAP-TYPE

Defined Objects

akcp 1.3.6.1.4.1.3854
OBJECT IDENTIFIER    

hhmsagent 1.3.6.1.4.1.3854.1
OBJECT IDENTIFIER    

hhmsUnknownStatus 1.3.6.1.4.1.3854.1.0
hhmsagent status went to Unknown
TRAP-TYPE    

hhmsAgentSummary 1.3.6.1.4.1.3854.1.1
OBJECT IDENTIFIER    

hhmsNormalStatus 1.3.6.1.4.1.3854.1.1
hhmsagent status is Normal
TRAP-TYPE    

hhmsAgentLocation 1.3.6.1.4.1.3854.1.1.1
The Agent location
OBJECT-TYPE    
  DisplayString  

hhmsAgentStatus 1.3.6.1.4.1.3854.1.1.2
The current status of this Agent. The status of the agent is the worst status of all the sensors usder the control of this agent.
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), warning(3), critical(4), sensorError(5)  

hhmsNumberBadSensors 1.3.6.1.4.1.3854.1.1.4
How many sensors controlled by this agent are not functioning properly
OBJECT-TYPE    
  INTEGER  

hhmsLocationBadSensor 1.3.6.1.4.1.3854.1.1.5
The Location of the first bad sensor controlled by this agent.
OBJECT-TYPE    
  DisplayString  

hhmsAgentManufName 1.3.6.1.4.1.3854.1.1.6
The manufacturers name
OBJECT-TYPE    
  DisplayString  

hhmsAgentHelpUrl 1.3.6.1.4.1.3854.1.1.7
The URL of the web based help
OBJECT-TYPE    
  DisplayString  

hhmsAgentHtmlView 1.3.6.1.4.1.3854.1.1.8
Which view of the sensors the user is served via the web server
OBJECT-TYPE    
  INTEGER sensorArray(1), sensorArrayPro(2), advanced(3)  

hhmsAgentHtmlStandardTitle 1.3.6.1.4.1.3854.1.1.9
The titles of the standard html view
OBJECT-TYPE    
  DisplayString  

hhmsAgentHtmlStandardButton 1.3.6.1.4.1.3854.1.1.10
The buttons of the standard html view
OBJECT-TYPE    
  DisplayString  

hhmsSensor 1.3.6.1.4.1.3854.1.2
OBJECT IDENTIFIER    

hhmsWarningStatus 1.3.6.1.4.1.3854.1.2
hhmsagent status went to Warning
TRAP-TYPE    

hhmsSensorArrayTable 1.3.6.1.4.1.3854.1.2.2
OBJECT IDENTIFIER    

hhmsSensorArrayEntry 1.3.6.1.4.1.3854.1.2.2.1
OBJECT IDENTIFIER    

hhmsSensorArrayHost 1.3.6.1.4.1.3854.1.2.2.1.1
The Host of this sensor, this is the IP address
OBJECT-TYPE    
  IpAddress  

hhmsSensorArrayUseDHCP 1.3.6.1.4.1.3854.1.2.2.1.2
To use DHCP enter a 1, to use a static IP address enter a 2
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hhmsSensorArrayMAC 1.3.6.1.4.1.3854.1.2.2.1.3
The MAC address of this sensor.
OBJECT-TYPE    
  DisplayString  

hhmsSensorArraySetCommunity 1.3.6.1.4.1.3854.1.2.2.1.4
The sensorArray community string used for snmp Sets
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayGetCommunity 1.3.6.1.4.1.3854.1.2.2.1.5
The sensorArray community string used for snmp Gets
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayDescription 1.3.6.1.4.1.3854.1.2.2.1.6
A Description of this sensorArray
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayLocation 1.3.6.1.4.1.3854.1.2.2.1.7
The description of the physical location of this sensorArray
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayLastUpdate 1.3.6.1.4.1.3854.1.2.2.1.8
The last time the sensorArray was read
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayStatus 1.3.6.1.4.1.3854.1.2.2.1.9
The current status of this sensorArray
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), sensorError(7)  

hhmsSensorArrayOnline 1.3.6.1.4.1.3854.1.2.2.1.10
If this sensorArray is currently online
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hhmsSensorArrayGoOnline 1.3.6.1.4.1.3854.1.2.2.1.11
To put online enter a 1, to take offline enter a 2
OBJECT-TYPE    
  INTEGER goOnline(1), goOffline(2)  

hhmsSensorArrayReadInterval 1.3.6.1.4.1.3854.1.2.2.1.12
How many seconds between readings of this sensor
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayReceiveTimeout 1.3.6.1.4.1.3854.1.2.2.1.13
How many seconds to wait to receive data from the sensor
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayReceiveRetries 1.3.6.1.4.1.3854.1.2.2.1.14
How many times to retry to receive data before giving up. A -1 means never give up trying
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayVersion 1.3.6.1.4.1.3854.1.2.2.1.15
The version of this SensorArray
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayTempTable 1.3.6.1.4.1.3854.1.2.2.1.16
This table contains the data for every Temperature Sensor in the SensorArray. Each row in the table contains data for a different Temperature Sensor.
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsSensorArrayTempEntry

hhmsSensorArrayTempEntry 1.3.6.1.4.1.3854.1.2.2.1.16.1
This is an entry in the hhmsSensorArrayTempEntry Table
OBJECT-TYPE    
  HhmsSensorArrayTempEntry  

hhmsSensorArrayTempDescription 1.3.6.1.4.1.3854.1.2.2.1.16.1.1
A Description of this sensor
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayTempLocation 1.3.6.1.4.1.3854.1.2.2.1.16.1.2
The physical location of this sensor
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayTempDegree 1.3.6.1.4.1.3854.1.2.2.1.16.1.3
The degrees in this sensor
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayTempStatus 1.3.6.1.4.1.3854.1.2.2.1.16.1.4
The current status of this Sensor
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)  

hhmsSensorArrayTempOnline 1.3.6.1.4.1.3854.1.2.2.1.16.1.5
If this Sensor is currently online
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hhmsSensorArrayTempGoOnline 1.3.6.1.4.1.3854.1.2.2.1.16.1.6
To put online enter a 1, to take offline enter a 2
OBJECT-TYPE    
  INTEGER goOnline(1), goOffline(2)  

hhmsSensorArrayTempHighWarning 1.3.6.1.4.1.3854.1.2.2.1.16.1.7
How hot this sensor gets before it sends a warning
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayTempHighCritical 1.3.6.1.4.1.3854.1.2.2.1.16.1.8
How hot this sensor gets before it sends a critical event
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayTempLowWarning 1.3.6.1.4.1.3854.1.2.2.1.16.1.9
How cold this sensor gets before it sends a warning
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayTempLowCritical 1.3.6.1.4.1.3854.1.2.2.1.16.1.10
How cold this sensor gets before it sends a critical event
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayTempRearm 1.3.6.1.4.1.3854.1.2.2.1.16.1.11
The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down hhmsTempRearm degrees below warning before the status goes to normal
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayTempDegreeType 1.3.6.1.4.1.3854.1.2.2.1.16.1.12
The degrees are in fahrenheit(0) or in celsius(1)
OBJECT-TYPE    
  INTEGER fahr(0), celsius(1)  

hhmsSensorArrayTempSensorType 1.3.6.1.4.1.3854.1.2.2.1.16.1.13
The type of temperture sensor
OBJECT-TYPE    
  INTEGER type1(0), type2(1)  

hhmsSensorArrayTempTestStatus 1.3.6.1.4.1.3854.1.2.2.1.16.1.14
Set the status for test purposes
OBJECT-TYPE    
  INTEGER testNoStatus(1), testNormal(2), testHighWarning(3), testHighCritical(4), testLowWarning(5), testLowCritical(6), sensorError(7)  

hhmsSensorArrayTempTestDegree 1.3.6.1.4.1.3854.1.2.2.1.16.1.15
Enter the degrees in this sensor for test purposes
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayTempIndex 1.3.6.1.4.1.3854.1.2.2.1.16.1.16
The index into the temperature sensor table
OBJECT-TYPE    
  INTEGER 0..3  

hhmsSensorArrayHumidityTable 1.3.6.1.4.1.3854.1.2.2.1.17
This table contains the data for every Humidity Sensor in the SensorArray. Each row in the table contains data for a different Humidity Sensor.
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsSensorArrayHumidityEntry

hhmsSensorArrayHumidityEntry 1.3.6.1.4.1.3854.1.2.2.1.17.1
This is an entry in the hhmsSensorArrayHumidityEntry Table
OBJECT-TYPE    
  HhmsSensorArrayHumidityEntry  

hhmsSensorArrayHumidityDescription 1.3.6.1.4.1.3854.1.2.2.1.17.1.1
A Description of this sensor
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayHumidityLocation 1.3.6.1.4.1.3854.1.2.2.1.17.1.2
The physical location of this sensor
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayHumidityPercent 1.3.6.1.4.1.3854.1.2.2.1.17.1.3
The relative humidity percentage measured by this sensor
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayHumidityStatus 1.3.6.1.4.1.3854.1.2.2.1.17.1.4
The current status of this Sensor
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)  

hhmsSensorArrayHumidityOnline 1.3.6.1.4.1.3854.1.2.2.1.17.1.5
If this Sensor is currently online
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hhmsSensorArrayHumidityGoOnline 1.3.6.1.4.1.3854.1.2.2.1.17.1.6
To put online enter a 1, to take offline enter a 2
OBJECT-TYPE    
  INTEGER goOnline(1), goOffline(2)  

hhmsSensorArrayHumidityHighWarning 1.3.6.1.4.1.3854.1.2.2.1.17.1.7
How high the relative humidity this sensor measures before it sends a warning
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayHumidityHighCritical 1.3.6.1.4.1.3854.1.2.2.1.17.1.8
How high the relative humidity this sensor measures before it becomes critical
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayHumidityLowWarning 1.3.6.1.4.1.3854.1.2.2.1.17.1.9
How low the relative humidity this sensor measures before it sends a warning
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayHumidityLowCritical 1.3.6.1.4.1.3854.1.2.2.1.17.1.10
How low the relative humidity this sensor measures before it becomes critical
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayHumidityRearm 1.3.6.1.4.1.3854.1.2.2.1.17.1.11
The percent relative humidity to rearm the status. For example if status goes from normal to warning, the humidity must go down hhmsHumidityRearm below warning before the status goes to normal
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayHumidityTestStatus 1.3.6.1.4.1.3854.1.2.2.1.17.1.12
Set the status for test purposes
OBJECT-TYPE    
  INTEGER testNoStatus(1), testNormal(2), testHighWarning(3), testHighCritical(4), testLowWarning(5), testLowCritical(6), sensorError(7)  

hhmsSensorArrayHumidityTestPercent 1.3.6.1.4.1.3854.1.2.2.1.17.1.13
Enter the percent of relative humidity in this sensor for test purposes
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayHumidityIndex 1.3.6.1.4.1.3854.1.2.2.1.17.1.14
The index into the Humidity sensor table
OBJECT-TYPE    
  INTEGER 0..2  

hhmsSensorArraySwitchTable 1.3.6.1.4.1.3854.1.2.2.1.18
This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor.
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsSensorArraySwitchEntry

hhmsSensorArraySwitchEntry 1.3.6.1.4.1.3854.1.2.2.1.18.1
This is an entry in the hhmsSensorArraySwitchEntry Table
OBJECT-TYPE    
  HhmsSensorArraySwitchEntry  

hhmsSensorArraySwitchDescription 1.3.6.1.4.1.3854.1.2.2.1.18.1.1
A Description of this sensor Switch
OBJECT-TYPE    
  DisplayString  

hhmsSensorArraySwitchLocation 1.3.6.1.4.1.3854.1.2.2.1.18.1.2
The physical location of this sensor Switch
OBJECT-TYPE    
  DisplayString  

hhmsSensorArraySwitchStatus 1.3.6.1.4.1.3854.1.2.2.1.18.1.3
The current status of this Sensor, only input switches have a status
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), critical(4), sensorError(7)  

hhmsSensorArraySwitchOnline 1.3.6.1.4.1.3854.1.2.2.1.18.1.4
If this Sensor is currently online
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hhmsSensorArraySwitchGoOnline 1.3.6.1.4.1.3854.1.2.2.1.18.1.5
To put online enter a 1, to take offline enter a 2
OBJECT-TYPE    
  INTEGER goOnline(1), goOffline(2)  

hhmsSensorArraySwitchDirection 1.3.6.1.4.1.3854.1.2.2.1.18.1.6
To set a switch to input enter 0. To set a switch to output enter 1
OBJECT-TYPE    
  INTEGER input(0), output(1)  

hhmsSensorArraySwitchNormalState 1.3.6.1.4.1.3854.1.2.2.1.18.1.7
The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch senses +5 volts. A closed switch senses 0 volts.
OBJECT-TYPE    
  INTEGER closed(0), open(1)  

hhmsSensorArraySwitchOutputLevel 1.3.6.1.4.1.3854.1.2.2.1.18.1.8
An output swith can be set to this level
OBJECT-TYPE    
  INTEGER low(0), high(1)  

hhmsSensorArraySwitchTestState 1.3.6.1.4.1.3854.1.2.2.1.18.1.9
Enter the status of this Sensor for test purposes
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), critical(4), sensorError(7)  

hhmsSensorArraySwitchIndex 1.3.6.1.4.1.3854.1.2.2.1.18.1.10
The index into the Switch sensor table
OBJECT-TYPE    
  INTEGER 0..24  

hhmsSensorArraySerialTable 1.3.6.1.4.1.3854.1.2.2.1.19
This table contains the data for every Serial Port in the SensorArray. Each row in the table contains data for a different Serial Port.
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsSensorArraySerialEntry

hhmsSensorArraySerialEntry 1.3.6.1.4.1.3854.1.2.2.1.19.1
This is an entry in the hhmsSensorArraySerialEntry Table
OBJECT-TYPE    
  HhmsSensorArraySerialEntry  

hhmsSensorArraySerialDescription 1.3.6.1.4.1.3854.1.2.2.1.19.1.1
A Description of this Serial Port
OBJECT-TYPE    
  DisplayString  

hhmsSensorArraySerialLocation 1.3.6.1.4.1.3854.1.2.2.1.19.1.2
The physical location of this Serial Port
OBJECT-TYPE    
  DisplayString  

hhmsSensorArraySerialStatus 1.3.6.1.4.1.3854.1.2.2.1.19.1.3
The current status of this Serial Port
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), critical(4), sensorError(7)  

hhmsSensorArraySerialOnline 1.3.6.1.4.1.3854.1.2.2.1.19.1.4
If this Serial Port is currently online
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hhmsSensorArraySerialGoOnline 1.3.6.1.4.1.3854.1.2.2.1.19.1.5
To put online enter a 1, to take offline enter a 2
OBJECT-TYPE    
  INTEGER goOnline(1), goOffline(2)  

hhmsSensorArraySerialData 1.3.6.1.4.1.3854.1.2.2.1.19.1.6
Write sends data, read gets data from this Serial Port
OBJECT-TYPE    
  DisplayString  

hhmsSensorArraySerialBaud 1.3.6.1.4.1.3854.1.2.2.1.19.1.7
Choose the baud rate for this serial port
OBJECT-TYPE    
  INTEGER baud1200(255), baud2400(129), baud4800(64), baud9600(32), baud19200(15), baud28800(10), baud38400(7), baud57600(4), baud115200(2)  

hhmsSensorArraySerialDataBits 1.3.6.1.4.1.3854.1.2.2.1.19.1.8
Parity bit for this serial port
OBJECT-TYPE    
  INTEGER eight(8)  

hhmsSensorArraySerialParity 1.3.6.1.4.1.3854.1.2.2.1.19.1.9
Parity bit for this serial port
OBJECT-TYPE    
  INTEGER none(1)  

hhmsSensorArraySerialStop 1.3.6.1.4.1.3854.1.2.2.1.19.1.10
Stop bits for this serial port
OBJECT-TYPE    
  INTEGER one(1)  

hhmsSensorArraySerialCTS 1.3.6.1.4.1.3854.1.2.2.1.19.1.11
Turn CTS on or off for this serial port
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hhmsSensorArraySerialRTS 1.3.6.1.4.1.3854.1.2.2.1.19.1.12
Turn RTS on or off for this serial port
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hhmsSensorArraySerialConfig 1.3.6.1.4.1.3854.1.2.2.1.19.1.13
A Description of this Serial Port
OBJECT-TYPE    
  DisplayString  

hhmsSensorArraySerialIndex 1.3.6.1.4.1.3854.1.2.2.1.19.1.14
The index into the Serial table
OBJECT-TYPE    
  INTEGER 0..1  

hhmsSensorArrayDebug 1.3.6.1.4.1.3854.1.2.2.1.20
Turn on or off debug messages
OBJECT-TYPE    
  INTEGER on(1), off(0)  

hhmsSensorArrayDebugIP 1.3.6.1.4.1.3854.1.2.2.1.21
The IP address to send debug messages to
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayTrapResend 1.3.6.1.4.1.3854.1.2.2.1.22
If traps for Warning or Error should be resent. Traps for Normal status are sent once
OBJECT-TYPE    
  INTEGER on(1), off(0)  

hhmsSensorArrayTrapResendInterval 1.3.6.1.4.1.3854.1.2.2.1.23
How often to resend mail or Traps. Enter the number of seconds from 15 to 65535. Mail for WARNING and ERROR are resent at this interval. Traps for Normal status are sent once
OBJECT-TYPE    
  INTEGER  

hhmsSensorArraySendTraps 1.3.6.1.4.1.3854.1.2.2.1.24
Turn on or off the sending of traps
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hhmsSensorArrayTrapDestination 1.3.6.1.4.1.3854.1.2.2.1.25
The IP address of the trap destination
OBJECT-TYPE    
  IpAddress  

hhmsSensorArrayTrapCommunity 1.3.6.1.4.1.3854.1.2.2.1.26
The community string of the trap destination
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayTrapDefaultGateway 1.3.6.1.4.1.3854.1.2.2.1.27
If the trap destination is on another network, enter the IP address of the router
OBJECT-TYPE    
  IpAddress  

hhmsSensorArrayTrapUseDefaultGateway 1.3.6.1.4.1.3854.1.2.2.1.28
If the trap destination uses the default gateway
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hhmsSensorArrayTrapDestinationMac 1.3.6.1.4.1.3854.1.2.2.1.29
If the trap destination MAC address
OBJECT-TYPE    
  DisplayString  

hhmsSensorArraySendMail 1.3.6.1.4.1.3854.1.2.2.1.30
Turn on or off the sending of Mail
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hhmsSensorArrayMailRecpt 1.3.6.1.4.1.3854.1.2.2.1.31
The email address of the Recipient
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayMailFrom 1.3.6.1.4.1.3854.1.2.2.1.32
The email address of the Sender
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayMailSmpt 1.3.6.1.4.1.3854.1.2.2.1.33
The IP Address of the SMPT server. Note: This must be in dotted decimal form
OBJECT-TYPE    
  IpAddress  

hhmsSensorArrayMailGateway 1.3.6.1.4.1.3854.1.2.2.1.34
If the smpt server is on another network, enter the IP address of the router
OBJECT-TYPE    
  IpAddress  

hhmsSensorArrayMailUseGateway 1.3.6.1.4.1.3854.1.2.2.1.35
If the mail uses the default gateway
OBJECT-TYPE    
  INTEGER on(1), off(2)  

hhmsSensorArrayMailResendInterval 1.3.6.1.4.1.3854.1.2.2.1.36
How often to resend mail or Traps. Enter the number of seconds from 10 to 65535. Mail for WARNING and ERROR are resent at this interval. Mail for Normal status are sent once
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayMailMaxResend 1.3.6.1.4.1.3854.1.2.2.1.37
The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 25
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayMailDestinationMac 1.3.6.1.4.1.3854.1.2.2.1.38
If the mail destination MAC address, either the smpt server or the gateway
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayMailLastStatus 1.3.6.1.4.1.3854.1.2.2.1.39
The status of the most recent attempt to send an email
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayPowerControlTable 1.3.6.1.4.1.3854.1.2.2.1.40
This table contains the Power Control features in the sensorArray.
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsSensorArrayPowerControlEntry

hhmsSensorArrayPowerControlEntry 1.3.6.1.4.1.3854.1.2.2.1.40.1
This is an entry in the hhmsSensorArrayPowerControlEntry Table
OBJECT-TYPE    
  HhmsSensorArrayPowerControlEntry  

hhmsSensorArrayPowerModuleDescription 1.3.6.1.4.1.3854.1.2.2.1.40.1.1
A Description of this Power Module
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayPowerModuleStatus 1.3.6.1.4.1.3854.1.2.2.1.40.1.2
The current status of this Sensor
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), sensorError(7)  

hhmsSensorArrayPowerModuleOnline 1.3.6.1.4.1.3854.1.2.2.1.40.1.3
If this Sensor is currently online
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hhmsSensorArrayPowerModuleGoOnline 1.3.6.1.4.1.3854.1.2.2.1.40.1.4
To put online enter a 1, to take offline enter a 2
OBJECT-TYPE    
  INTEGER goOnline(1), goOffline(2)  

hhmsSensorArrayPowerOutletDescription 1.3.6.1.4.1.3854.1.2.2.1.40.1.5
A Description of this Power Port
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayPowerOutletStatus 1.3.6.1.4.1.3854.1.2.2.1.40.1.6
The current status of this Sensor
OBJECT-TYPE    
  INTEGER noStatus(1), on(2), off(3), sensorError(7)  

hhmsSensorArrayPowerOutletSet 1.3.6.1.4.1.3854.1.2.2.1.40.1.7
The current status of this Sensor
OBJECT-TYPE    
  INTEGER noStatus(1), on(2), off(3), reboot(4), sensorError(7)  

hhmsSensorArrayPowerControlIndex 1.3.6.1.4.1.3854.1.2.2.1.40.1.8
The index into the Power Control table
OBJECT-TYPE    
  INTEGER 0..1  

hhmsSensorArrayPowerMonitorTable 1.3.6.1.4.1.3854.1.2.2.1.41
This table contains the Power Monitor features in the sensorArray.
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsSensorArrayPowerMonitorEntry

hhmsSensorArrayPowerMonitorEntry 1.3.6.1.4.1.3854.1.2.2.1.41.1
This is an entry in the hhmsSensorArrayPowerMonitorEntry Table
OBJECT-TYPE    
  HhmsSensorArrayPowerMonitorEntry  

hhmsSensorArrayPowerMonitorDescription 1.3.6.1.4.1.3854.1.2.2.1.41.1.1
A Description of this Power Monitor
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayPowerMonitorCurrent 1.3.6.1.4.1.3854.1.2.2.1.41.1.2
The current in this sensor
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayPowerMonitorVoltage 1.3.6.1.4.1.3854.1.2.2.1.41.1.3
The voltage in this sensor
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayPowerMonitorPower 1.3.6.1.4.1.3854.1.2.2.1.41.1.4
The total energy measured so far by this sensor
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayPowerMonitorStatus 1.3.6.1.4.1.3854.1.2.2.1.41.1.5
The current status of this Sensor
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)  

hhmsSensorArrayPowerMonitorOnline 1.3.6.1.4.1.3854.1.2.2.1.41.1.6
If this Sensor is currently online
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hhmsSensorArrayPowerMonitorGoOnline 1.3.6.1.4.1.3854.1.2.2.1.41.1.7
To put online enter a 1, to take offline enter a 2
OBJECT-TYPE    
  INTEGER goOnline(1), goOffline(2)  

hhmsSensorArrayPowerMonitorHighWarning 1.3.6.1.4.1.3854.1.2.2.1.41.1.8
How many watts of power this sensor detects before the sensor status is set to warning
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayPowerMonitorHighCritical 1.3.6.1.4.1.3854.1.2.2.1.41.1.9
How many watts of power this sensor detects before the sensor status is set to critical
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayPowerMonitorLowWarning 1.3.6.1.4.1.3854.1.2.2.1.41.1.10
How many watts of power this sensor detects before the sensor status is set to warning
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayPowerMonitorLowCritical 1.3.6.1.4.1.3854.1.2.2.1.41.1.11
How many watts of power this sensor detects before the sensor status is set to critical
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayPowerMonitorRearm 1.3.6.1.4.1.3854.1.2.2.1.41.1.12
How many watts of power this sensor detects to rearm the status. For example if status goes from normal to warning, the temp must go down hhmsTempRearm degrees below warning before the status goes to normal
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayPowerMonitorIndex 1.3.6.1.4.1.3854.1.2.2.1.41.1.13
The index into the Power table
OBJECT-TYPE    
  INTEGER 0..4  

hhmsSensorArrayHighDriveTable 1.3.6.1.4.1.3854.1.2.2.1.42
This table contains the High Current Drivers in the sensorArray.
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsSensorArrayHighDriveEntry

hhmsSensorArrayHighDriveEntry 1.3.6.1.4.1.3854.1.2.2.1.42.1
This is an entry in the hhmsSensorArrayHighDriveEntry Table
OBJECT-TYPE    
  HhmsSensorArrayHighDriveEntry  

hhmsSensorArrayHighDriveDescription 1.3.6.1.4.1.3854.1.2.2.1.42.1.1
A Description of this Power Monitor
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayHighDriveOutputLevel 1.3.6.1.4.1.3854.1.2.2.1.42.1.2
The Driver can be on or off. If closed the Open Collector will sink current. If open the Open Collector will tri state
OBJECT-TYPE    
  INTEGER closed(0), open(1)  

hhmsSensorArrayHighDriveIndex 1.3.6.1.4.1.3854.1.2.2.1.42.1.3
The index into the HighDrive table
OBJECT-TYPE    
  INTEGER 0..3  

hhmsSensorArrayCameraTable 1.3.6.1.4.1.3854.1.2.2.1.43
This table contains the Camera features in the sensorArray.
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsSensorArrayCameraEntry

hhmsSensorArrayCameraEntry 1.3.6.1.4.1.3854.1.2.2.1.43.1
This is an entry in the hhmsSensorArrayCameraEntry Table
OBJECT-TYPE    
  HhmsSensorArrayCameraEntry  

hhmsSensorArrayCameraDescription 1.3.6.1.4.1.3854.1.2.2.1.43.1.1
A Description of this Camera
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayCameraOnline 1.3.6.1.4.1.3854.1.2.2.1.43.1.2
If this Sensor is currently online
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

hhmsSensorArrayCameraGoOnline 1.3.6.1.4.1.3854.1.2.2.1.43.1.3
To put online enter a 1, to take offline enter a 2
OBJECT-TYPE    
  INTEGER goOnline(1), goOffline(2)  

hhmsSensorArrayCameraUrlMain 1.3.6.1.4.1.3854.1.2.2.1.43.1.4
The URL of the Camera, for example http://10.1.1.7
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayCameraUrlExtension 1.3.6.1.4.1.3854.1.2.2.1.43.1.5
The cgi extension for the Picture from this Camera for example /webcam/server.jpg
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayCameraRefreshRate 1.3.6.1.4.1.3854.1.2.2.1.43.1.6
How often to refresh the image on the browser in seconds from 5 to 254
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayCameraIndex 1.3.6.1.4.1.3854.1.2.2.1.43.1.7
The index into the Camera table
OBJECT-TYPE    
  INTEGER 0..3  

hhmsSensorArrayTrapMailPollInterval 1.3.6.1.4.1.3854.1.2.2.1.50
How often the sensor thresholds are tested before sending traps or mail. This can vary from 3 to 15 seconds
OBJECT-TYPE    
  INTEGER  

hhmsSensorArraySendTestMail 1.3.6.1.4.1.3854.1.2.2.1.51
Send out an email test message
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayLastSystemError 1.3.6.1.4.1.3854.1.2.2.1.52
A text string containing the description of the last system error
OBJECT-TYPE    
  DisplayString  

hhmsSensorArrayDataCollectionPeriod 1.3.6.1.4.1.3854.1.2.2.1.53
The number of minutes between collections of the data logger. This can vary from 1 to 60 minutes
OBJECT-TYPE    
  INTEGER  

hhmsSensorArrayMailTimeout 1.3.6.1.4.1.3854.1.2.2.1.54
The number of seconds to wait for a timeout while sending email This can vary from 10 to 60 seconds
OBJECT-TYPE    
  INTEGER  

hhmsCriticalStatus 1.3.6.1.4.1.3854.1.3
hhmsagent status went to Critical
TRAP-TYPE    

hhmsDownStatus 1.3.6.1.4.1.3854.1.4
hhmsagent status went to Disabled
TRAP-TYPE    

hhmsAgentConfig 1.3.6.1.4.1.3854.1.5
OBJECT IDENTIFIER    

hhmsAgentVersion 1.3.6.1.4.1.3854.1.5.1
The hhms agent release version number
OBJECT-TYPE    
  DisplayString  

hhmsCompressedSummaryTable 1.3.6.1.4.1.3854.1.5.7
This table contains a way to get summary info to the browser using minimum communication. One get contains a PDU info from multiple sensorArrays
OBJECT-TYPE    
  SEQUENCE OF  
    HhmsCompressedSummaryEntry

hhmsCompressedSummaryEntry 1.3.6.1.4.1.3854.1.5.7.1
This is an entry in the hhmsCompressedSummary Table
OBJECT-TYPE    
  HhmsCompressedSummaryEntry  

hhmsCompressedSummaryGet 1.3.6.1.4.1.3854.1.5.7.1.1
Get multiple compressed summary PDU
OBJECT-TYPE    
  DisplayString  

hhmsCompressedSummaryIndex 1.3.6.1.4.1.3854.1.5.7.1.2
The index into the compressed summary table
OBJECT-TYPE    
  INTEGER 0..1  

hhmsAgentTraps 1.3.6.1.4.1.3854.1.7
OBJECT IDENTIFIER    

hhmsSensorStatus 1.3.6.1.4.1.3854.1.7.1
The current integer status of the sensor causing this trap to be sent
OBJECT-TYPE    
  INTEGER noStatus(1), normal(2), highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), sensorError(7)  

hhmsSensorValue 1.3.6.1.4.1.3854.1.7.2
The current integer value of the sensor causing this trap to be sent
OBJECT-TYPE    
  INTEGER  

hhmsSensorLevelExceeded 1.3.6.1.4.1.3854.1.7.3
The integer level that was exceeded causing this trap to be sent
OBJECT-TYPE    
  INTEGER  

hhmsSensorIndex 1.3.6.1.4.1.3854.1.7.4
The integer index of the sensor causing this trap to be sent
OBJECT-TYPE    
  INTEGER  

hhmsSensorName 1.3.6.1.4.1.3854.1.7.5
The name of the sensor causing this trap to be sent
OBJECT-TYPE    
  DisplayString  

hhmsSensorDescription 1.3.6.1.4.1.3854.1.7.6
The description of the sensor causing this trap to be sent
OBJECT-TYPE    
  DisplayString  

hhmsTemperatureStatus 1.3.6.1.4.1.3854.1.10
Temperature sensor trap
TRAP-TYPE    
  hhmsSensorStatus  
  hhmsSensorValue  
  hhmsSensorLevelExceeded  
  hhmsSensorIndex  
  hhmsSensorName  
  hhmsSensorDescription  

hhmsHumidityStatus 1.3.6.1.4.1.3854.1.20
Humidity sensor trap
TRAP-TYPE    
  hhmsSensorStatus  
  hhmsSensorValue  
  hhmsSensorLevelExceeded  
  hhmsSensorIndex  
  hhmsSensorName  
  hhmsSensorDescription  

hhmsSwitchStatus 1.3.6.1.4.1.3854.1.30
Switch sensor trap
TRAP-TYPE    
  hhmsSensorStatus  
  hhmsSensorValue  
  hhmsSensorLevelExceeded  
  hhmsSensorIndex  
  hhmsSensorName  
  hhmsSensorDescription  

hhmsPowerMonitorStatus 1.3.6.1.4.1.3854.1.40
Power Monitor sensor trap
TRAP-TYPE    
  hhmsSensorStatus  
  hhmsSensorValue  
  hhmsSensorLevelExceeded  
  hhmsSensorIndex  
  hhmsSensorName  
  hhmsSensorDescription  

Defined Objects

HhmsSensorArrayTempEntry  
SEQUENCE    
  DisplayString as hhmsSensorArrayTempDescription  
  DisplayString as hhmsSensorArrayTempLocation  
  INTEGER as hhmsSensorArrayTempDegree  
  INTEGER as hhmsSensorArrayTempStatus  
  INTEGER as hhmsSensorArrayTempOnline  
  INTEGER as hhmsSensorArrayTempGoOnline  
  INTEGER as hhmsSensorArrayTempHighWarning  
  INTEGER as hhmsSensorArrayTempHighCritical  
  INTEGER as hhmsSensorArrayTempLowWarning  
  INTEGER as hhmsSensorArrayTempLowCritical  
  INTEGER as hhmsSensorArrayTempRearm  
  INTEGER as hhmsSensorArrayTempDegreeType  
  INTEGER as hhmsSensorArrayTempSensorType  
  INTEGER as hhmsSensorArrayTempTestStatus  
  INTEGER as hhmsSensorArrayTempTestDegree  
  INTEGER as hhmsSensorArrayTempIndex  

HhmsSensorArrayHumidityEntry  
SEQUENCE    
  DisplayString as hhmsSensorArrayHumidityDescription  
  DisplayString as hhmsSensorArrayHumidityLocation  
  INTEGER as hhmsSensorArrayHumidityPercent  
  INTEGER as hhmsSensorArrayHumidityStatus  
  INTEGER as hhmsSensorArrayHumidityOnline  
  INTEGER as hhmsSensorArrayHumidityGoOnline  
  INTEGER as hhmsSensorArrayHumidityHighWarning  
  INTEGER as hhmsSensorArrayHumidityHighCritical  
  INTEGER as hhmsSensorArrayHumidityLowWarning  
  INTEGER as hhmsSensorArrayHumidityLowCritical  
  INTEGER as hhmsSensorArrayHumidityRearm  
  INTEGER as hhmsSensorArrayHumidityTestStatus  
  INTEGER as hhmsSensorArrayHumidityTestPercent  
  INTEGER as hhmsSensorArrayHumidityIndex  

HhmsSensorArraySwitchEntry  
SEQUENCE    
  DisplayString as hhmsSensorArraySwitchDescription  
  DisplayString as hhmsSensorArraySwitchLocation  
  INTEGER as hhmsSensorArraySwitchStatus  
  INTEGER as hhmsSensorArraySwitchOnline  
  INTEGER as hhmsSensorArraySwitchGoOnline  
  INTEGER as hhmsSensorArraySwitchDirection  
  INTEGER as hhmsSensorArraySwitchNormalState  
  INTEGER as hhmsSensorArraySwitchOutputLevel  
  INTEGER as hhmsSensorArraySwitchTestState  
  INTEGER as hhmsSensorArraySwitchIndex  

HhmsSensorArraySerialEntry  
SEQUENCE    
  DisplayString as hhmsSensorArraySerialDescription  
  DisplayString as hhmsSensorArraySerialLocation  
  INTEGER as hhmsSensorArraySerialStatus  
  INTEGER as hhmsSensorArraySerialOnline  
  INTEGER as hhmsSensorArraySerialGoOnline  
  DisplayString as hhmsSensorArraySerialData  
  INTEGER as hhmsSensorArraySerialBaud  
  INTEGER as hhmsSensorArraySerialDataBits  
  INTEGER as hhmsSensorArraySerialParity  
  INTEGER as hhmsSensorArraySerialStop  
  INTEGER as hhmsSensorArraySerialCTS  
  INTEGER as hhmsSensorArraySerialRTS  
  DisplayString as hhmsSensorArraySerialConfig  
  INTEGER as hhmsSensorArraySerialIndex  

HhmsSensorArrayPowerControlEntry  
SEQUENCE    
  DisplayString as hhmsSensorArrayPowerModuleDescription  
  INTEGER as hhmsSensorArrayPowerModuleStatus  
  INTEGER as hhmsSensorArrayPowerModuleOnline  
  INTEGER as hhmsSensorArrayPowerModuleGoOnline  
  DisplayString as hhmsSensorArrayPowerOutletDescription  
  INTEGER as hhmsSensorArrayPowerOutletStatus  
  INTEGER as hhmsSensorArrayPowerOutletSet  
  INTEGER as hhmsSensorArrayPowerControlIndex  

HhmsSensorArrayPowerMonitorEntry  
SEQUENCE    
  DisplayString as hhmsSensorArrayPowerMonitorDescription  
  INTEGER as hhmsSensorArrayPowerMonitorCurrent  
  INTEGER as hhmsSensorArrayPowerMonitorVoltage  
  DisplayString as hhmsSensorArrayPowerMonitorPower  
  INTEGER as hhmsSensorArrayPowerMonitorStatus  
  INTEGER as hhmsSensorArrayPowerMonitorOnline  
  INTEGER as hhmsSensorArrayPowerMonitorGoOnline  
  INTEGER as hhmsSensorArrayPowerMonitorHighWarning  
  INTEGER as hhmsSensorArrayPowerMonitorHighCritical  
  INTEGER as hhmsSensorArrayPowerMonitorLowWarning  
  INTEGER as hhmsSensorArrayPowerMonitorLowCritical  
  INTEGER as hhmsSensorArrayPowerMonitorRearm  
  INTEGER as hhmsSensorArrayPowerMonitorIndex  

HhmsSensorArrayHighDriveEntry  
SEQUENCE    
  DisplayString as hhmsSensorArrayHighDriveDescription  
  INTEGER as hhmsSensorArrayHighDriveOutputLevel  
  INTEGER as hhmsSensorArrayHighDriveIndex  

HhmsSensorArrayCameraEntry  
SEQUENCE    
  DisplayString as hhmsSensorArrayCameraDescription  
  INTEGER as hhmsSensorArrayCameraOnline  
  INTEGER as hhmsSensorArrayCameraGoOnline  
  DisplayString as hhmsSensorArrayCameraUrlMain  
  DisplayString as hhmsSensorArrayCameraUrlExtension  
  INTEGER as hhmsSensorArrayCameraRefreshRate  
  INTEGER as hhmsSensorArrayCameraIndex  

HhmsCompressedSummaryEntry  
SEQUENCE    
  DisplayString as hhmsCompressedSummaryGet  
  INTEGER as hhmsCompressedSummaryIndex