HP-SN-POS-GROUP-MIB

File: HP-SN-POS-GROUP-MIB.mib (15413 bytes)

Imported modules

RFC1155-SMI RFC-1212 HP-SN-ROOT-MIB

Imported symbols

Counter Gauge OBJECT-TYPE
snPOS

Defined Objects

snPOSInfo 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1
OBJECT IDENTIFIER    

snPOSInfoTable 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1
A specific snPOSInfo group consists of a number of switch ports.
OBJECT-TYPE    
  SEQUENCE OF  
    SnPOSInfoEntry

snPOSInfoEntry 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1
An entry in the snPOSInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPOSInfoTable requires the entired sequence of the MIB Objects in each snPOSInfoEntry stored in one PDU. Otherwise, GENERR return-value will be returned.
OBJECT-TYPE    
  SnPOSInfoEntry  

snPOSInfoPortNum 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.1
The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only).
OBJECT-TYPE    
  INTEGER  

snPOSIfIndex 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.2
In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573.
OBJECT-TYPE    
  INTEGER  

snPOSDescr 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.3
A textual string containing the slot/port information about the interface.
OBJECT-TYPE    
  DisplayString  

snPOSName 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.4
Port Name string.
OBJECT-TYPE    
  DisplayString SIZE(0..255)  

snPOSInfoSpeed 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.5
The speed configuration for a port. The values are: 155000 622000
OBJECT-TYPE    
  INTEGER s155000(1), s622000(2), other(3)  

snPOSInfoAdminStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.6
The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II)
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

snPOSInfoLinkStatus 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.7
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II)
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

snPOSInfoClock 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.8
Clock default internal
OBJECT-TYPE    
  INTEGER internal(1), line(2)  

snPOSInfoLoopBack 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.9
Loop back default none
OBJECT-TYPE    
  INTEGER line(1), internal(2), none(3)  

snPOSInfoScambleATM 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.10
ATM style scrambling default off
OBJECT-TYPE    
  POSStatus  

snPOSInfoFraming 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.11
Framing default SONET
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

snPOSInfoCRC 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.12
CRC default 32 bit
OBJECT-TYPE    
  INTEGER crc32bits(1), crc16bits(2)  

snPOSInfoKeepAlive 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.13
Keep-alive default 10
OBJECT-TYPE    
  INTEGER 0..32767  

snPOSInfoFlagC2 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.14
C2 flag
OBJECT-TYPE    
  INTEGER 0..255  

snPOSInfoFlagJ0 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.15
J0 flag
OBJECT-TYPE    
  INTEGER 0..255  

snPOSInfoFlagH1 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.16
H1 flag
OBJECT-TYPE    
  INTEGER 0..255  

snPOSStatsInFrames 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.17
The total number of packets received on the interface.
OBJECT-TYPE    
  Counter  

snPOSStatsOutFrames 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.18
The total number of packets transmitted out of the interface.
OBJECT-TYPE    
  Counter  

snPOSStatsAlignErrors 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.19
dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

snPOSStatsFCSErrors 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.20
dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

snPOSStatsFrameTooLongs 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.21
dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
OBJECT-TYPE    
  Counter  

snPOSStatsFrameTooShorts 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.22
A count of frames received on a particular interface that below the minimum permitted frame size.
OBJECT-TYPE    
  Counter  

snPOSStatsInDiscard 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.23
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
OBJECT-TYPE    
  Counter  

snPOSStatsOutDiscard 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.24
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
OBJECT-TYPE    
  Counter  

snPOSInOctets 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.25
The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 1213. The octet string is in big-endian byte order.
OBJECT-TYPE    
  OCTET STRING SIZE(8)  

snPOSOutOctets 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.26
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined in RFC 1213. The octet string is in big-endian byte order.
OBJECT-TYPE    
  OCTET STRING SIZE(8)  

snPOSStatsInBitsPerSec 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.27
The number of bits per second received on the interface over a 5 minutes interval.
OBJECT-TYPE    
  Gauge  

snPOSStatsOutBitsPerSec 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.28
The number of bits per second transmitted out of the interface over a 5 minutes interval.
OBJECT-TYPE    
  Gauge  

snPOSStatsInPktsPerSec 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.29
The number of packets per second received on the interface over a 5 minutes interval.
OBJECT-TYPE    
  Gauge  

snPOSStatsOutPktsPerSec 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.30
The number of packets per second transmitted out of the interface over a 5 minutes interval.
OBJECT-TYPE    
  Gauge  

snPOSStatsInUtilization 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.31
The input network utilization in hundredths of a percent over a 5 minutes interval.
OBJECT-TYPE    
  INTEGER 0..10000  

snPOSStatsOutUtilization 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.32
The output network utilization in hundredths of a percent over a 5 minutes interval.
OBJECT-TYPE    
  INTEGER 0..10000  

Defined Objects

POSStatus  
INTEGER disabled(0), enabled(1)    

DisplayString  
OCTET STRING    

SnPOSInfoEntry  
SEQUENCE    
  INTEGER as snPOSInfoPortNum  
  INTEGER as snPOSIfIndex  
  DisplayString as snPOSDescr  
  DisplayString as snPOSName  
  INTEGER as snPOSInfoSpeed  
  INTEGER as snPOSInfoAdminStatus  
  INTEGER as snPOSInfoLinkStatus  
  INTEGER as snPOSInfoClock  
  INTEGER as snPOSInfoLoopBack  
  POSStatus as snPOSInfoScambleATM  
  INTEGER as snPOSInfoFraming  
  INTEGER as snPOSInfoCRC  
  INTEGER as snPOSInfoKeepAlive  
  INTEGER as snPOSInfoFlagC2  
  INTEGER as snPOSInfoFlagJ0  
  INTEGER as snPOSInfoFlagH1  
  Counter as snPOSStatsInFrames  
  Counter as snPOSStatsOutFrames  
  Counter as snPOSStatsAlignErrors  
  Counter as snPOSStatsFCSErrors  
  Counter as snPOSStatsFrameTooLongs  
  Counter as snPOSStatsFrameTooShorts  
  Counter as snPOSStatsInDiscard  
  Counter as snPOSStatsOutDiscard  
  OCTET STRING as snPOSInOctets  
  OCTET STRING as snPOSOutOctets  
  Gauge as snPOSStatsInBitsPerSec  
  Gauge as snPOSStatsOutBitsPerSec  
  Gauge as snPOSStatsInPktsPerSec  
  Gauge as snPOSStatsOutPktsPerSec  
  INTEGER as snPOSStatsInUtilization 0..10000  
  INTEGER as snPOSStatsOutUtilization 0..10000