
| SNMPv2-TC | SNMPv2-SMI | RFC1213-MIB |
| HUAWEI-3COM-OID-MIB |
| RowStatus | DisplayString | TruthValue |
| TEXTUAL-CONVENTION | MODULE-IDENTITY | OBJECT-TYPE |
| Integer32 | IpAddress | TimeTicks |
| OBJECT-IDENTITY | Unsigned32 | ifEntry |
| ifIndex | lswCommon |
| hwLswExtInterface | 1.3.6.1.4.1.2011.2.23.1.1 | ||
| OBJECT IDENTIFIER | |||
| hwifXXTable | 1.3.6.1.4.1.2011.2.23.1.1.1 | ||
| Extended Huawei private interface information table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HwIfXXEntry | |||
| hwifXXEntry | 1.3.6.1.4.1.2011.2.23.1.1.1.1 | ||
| Entries of extended Huawei private interface information table. | |||
| OBJECT-TYPE | |||
| HwIfXXEntry | |||
| hwifUnBoundPort | 1.3.6.1.4.1.2011.2.23.1.1.1.1.1 | ||
| Whether it is the unbound port (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation) | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| hwifISPhyPort | 1.3.6.1.4.1.2011.2.23.1.1.1.1.2 | ||
| Whether it is a physical interface | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| hwifAggregatePort | 1.3.6.1.4.1.2011.2.23.1.1.1.1.3 | ||
| Whether it is the aggregated port (if the port participates in the aggregation, this value is true.) | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| hwifMirrorPort | 1.3.6.1.4.1.2011.2.23.1.1.1.1.4 | ||
| Whether it is a mirror port. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| hwifVLANType | 1.3.6.1.4.1.2011.2.23.1.1.1.1.5 | ||
| port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port. | |||
| OBJECT-TYPE | |||
| INTEGER | vLANTrunk(1), access(2), hybrid(3), fabric(4) | ||
| hwifMcastControl | 1.3.6.1.4.1.2011.2.23.1.1.1.1.6 | ||
| Broadcast storm suppression with the step length of 1, ranging from 1 to 100 percent. In some products the step is 5, ranging from 5 to 100. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| hwifFlowControl | 1.3.6.1.4.1.2011.2.23.1.1.1.1.7 | ||
| Flow control status | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| hwifSrcMacControl | 1.3.6.1.4.1.2011.2.23.1.1.1.1.8 | ||
| Whether to filter by source MAC address. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| hwifClearStat | 1.3.6.1.4.1.2011.2.23.1.1.1.1.9 | ||
| Clear all port statistics. Read operation not supported. | |||
| OBJECT-TYPE | |||
| INTEGER | clear(1) | ||
| hwifXXBasePortIndex | 1.3.6.1.4.1.2011.2.23.1.1.1.1.10 | ||
| Index number of the port. Portindex 1 is the largest port number on the equipment. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| hwifXXDevPortIndex | 1.3.6.1.4.1.2011.2.23.1.1.1.1.11 | ||
| Octet slot of the port + 2-octet subslot + 2-octet port index number. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hwifPpsMcastControl | 1.3.6.1.4.1.2011.2.23.1.1.1.1.12 | ||
| The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifPpsBcastDisValControl | 1.3.6.1.4.1.2011.2.23.1.1.1.1.13 | ||
| Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast. | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| hwifUniSuppressionStep | 1.3.6.1.4.1.2011.2.23.1.1.1.1.14 | ||
| The step of unicast suppression in ratio mode. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifPpsUniSuppressionMax | 1.3.6.1.4.1.2011.2.23.1.1.1.1.15 | ||
| The max pps(packet per second) value of unicast suppression in pps mode. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifMulSuppressionStep | 1.3.6.1.4.1.2011.2.23.1.1.1.1.16 | ||
| The step of multicast suppression in ratio mode. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifPpsMulSuppressionMax | 1.3.6.1.4.1.2011.2.23.1.1.1.1.17 | ||
| The max pps(packet per second) value of multicast suppression in pps mode. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifUniSuppression | 1.3.6.1.4.1.2011.2.23.1.1.1.1.18 | ||
| The unicast suppression with the ranging from 1 to 100 percent in ratio mode. The step is determined by hwifUniSuppressionStep. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifPpsUniSuppression | 1.3.6.1.4.1.2011.2.23.1.1.1.1.19 | ||
| The unicast suppression in pps(packet per second) mode. The max value is determined by hwifPpsUniSuppressionMax. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifMulSuppression | 1.3.6.1.4.1.2011.2.23.1.1.1.1.20 | ||
| The multicast suppression with ranging from 1 to 100 percent in ratio mode. The step is determined by hwifMulSuppressionStep. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifPpsMulSuppression | 1.3.6.1.4.1.2011.2.23.1.1.1.1.21 | ||
| The multicast suppression in pps(packet per second) mode. The max pps value is determined by hwifPpsMulSuppressionMax | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifComboActivePort | 1.3.6.1.4.1.2011.2.23.1.1.1.1.22 | ||
| Active port on combo interface. | |||
| OBJECT-TYPE | |||
| INTEGER | fiber(1), copper(2), na(3) | ||
| hwifBMbpsMulSuppressionMax | 1.3.6.1.4.1.2011.2.23.1.1.1.1.23 | ||
| The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifBMbpsMulSuppression | 1.3.6.1.4.1.2011.2.23.1.1.1.1.24 | ||
| With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hwifBMbpsMulSuppressionMax in the entry. The default value of hwifBMbpsMulSuppression is the value of hwifBMbpsMulSuppressionMax. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifBKbpsMulSuppressionMax | 1.3.6.1.4.1.2011.2.23.1.1.1.1.25 | ||
| The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifBKbpsMulSuppressionStep | 1.3.6.1.4.1.2011.2.23.1.1.1.1.26 | ||
| The step of multicast suppression with bandwidth-based(Kbps). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifBKbpsMulSuppression | 1.3.6.1.4.1.2011.2.23.1.1.1.1.27 | ||
| With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hwifBKbpsMulSuppressionMax in the entry. The value of hwifBKbpsMulSuppression must be multiple of the value of hwifBKbpsMulSuppressionStep. The default value of hwifBKbpsMulSuppression is the value of hwifBKbpsMulSuppressionMax. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifUnknownPacketDropMul | 1.3.6.1.4.1.2011.2.23.1.1.1.1.28 | ||
| Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions. | |||
| OBJECT-TYPE | |||
| DropDirection | |||
| hwifUnknownPacketDropUni | 1.3.6.1.4.1.2011.2.23.1.1.1.1.29 | ||
| Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions. | |||
| OBJECT-TYPE | |||
| DropDirection | |||
| hwifAggregateTable | 1.3.6.1.4.1.2011.2.23.1.1.2 | ||
| Port aggregation information table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HwIfAggregateEntry | |||
| hwifAggregateEntry | 1.3.6.1.4.1.2011.2.23.1.1.2.1 | ||
| Port aggregation information table. | |||
| OBJECT-TYPE | |||
| HwIfAggregateEntry | |||
| hwifAggregatePortIndex | 1.3.6.1.4.1.2011.2.23.1.1.2.1.1 | ||
| Index number of the main aggregated port. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| hwifAggregatePortName | 1.3.6.1.4.1.2011.2.23.1.1.2.1.2 | ||
| Aggregation group name. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..40) | ||
| hwifAggregatePortListPorts | 1.3.6.1.4.1.2011.2.23.1.1.2.1.3 | ||
| Portlist of a aggregating. | |||
| OBJECT-TYPE | |||
| PortList | |||
| hwifAggregateModel | 1.3.6.1.4.1.2011.2.23.1.1.2.1.4 | ||
| Load sharing mode for the port aggregation. | |||
| OBJECT-TYPE | |||
| INTEGER | ingress(1), both(2), round-robin(3) | ||
| hwifAggregateOperStatus | 1.3.6.1.4.1.2011.2.23.1.1.2.1.5 | ||
| Current operation status of the row. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| hwifHybridPortTable | 1.3.6.1.4.1.2011.2.23.1.1.3 | ||
| Hybrid-port configuration table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HwifHybridPortEntry | |||
| hwifHybridPortEntry | 1.3.6.1.4.1.2011.2.23.1.1.3.1 | ||
| Hybrid-port configuration table. | |||
| OBJECT-TYPE | |||
| HwifHybridPortEntry | |||
| hwifHybridPortIndex | 1.3.6.1.4.1.2011.2.23.1.1.3.1.1 | ||
| Index number of Hybrid-port. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hwifHybridTaggedVlanListLow | 1.3.6.1.4.1.2011.2.23.1.1.3.1.2 | ||
| The lowest possible value of the tagged vlan list on the Hybrid-port. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..256) | ||
| hwifHybridTaggedVlanListHigh | 1.3.6.1.4.1.2011.2.23.1.1.3.1.3 | ||
| The highest possible value of the tagged vlan list on the Hybrid-port. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..256) | ||
| hwifHybridUnTaggedVlanListLow | 1.3.6.1.4.1.2011.2.23.1.1.3.1.4 | ||
| The lowest possible value of the untagged vlan list on the Hybrid-port. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..256) | ||
| hwifHybridUnTaggedVlanListHigh | 1.3.6.1.4.1.2011.2.23.1.1.3.1.5 | ||
| The highest possible value of the untagged vlan list on the Hybrid-port. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..256) | ||
| hwLswL2InfMib | 1.3.6.1.4.1.2011.2.23.1.5 | ||
| OBJECT IDENTIFIER | |||
| hwLswL2InfMibObject | 1.3.6.1.4.1.2011.2.23.1.5.1 | ||
| OBJECT IDENTIFIER | |||
| hwSlotPortMax | 1.3.6.1.4.1.2011.2.23.1.5.1.1 | ||
| Max ports of the slots. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hwSwitchPortMax | 1.3.6.1.4.1.2011.2.23.1.5.1.2 | ||
| Max ports that this switch includes. | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| hwifVLANTrunkStatusTable | 1.3.6.1.4.1.2011.2.23.1.5.1.3 | ||
| Gvrp attributes on the VlanTrunk port | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HwIfVLANTrunkStatusEntry | |||
| hwifVLANTrunkStatusEntry | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1 | ||
| Gvrp attributes on the VlanTrunk port. | |||
| OBJECT-TYPE | |||
| HwIfVLANTrunkStatusEntry | |||
| hwifVLANTrunkIndex | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.1 | ||
| Index number of the VLANTrunk interface. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| hwifVLANTrunkGvrpRegistration | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.2 | ||
| GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port. | |||
| OBJECT-TYPE | |||
| INTEGER | normal(1), fixed(2), forbidden(3) | ||
| hwifVLANTrunkPassListLow | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.4 | ||
| VLANs actually carried by the VLAN port. The lowest number of VLANs: 2048 (1 to 2048), and the length is 256. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| hwifVLANTrunkPassListHigh | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.5 | ||
| VLANs actually carried by the VLAN port. The highest number of VLANs: 2046(2049 to 4094), and the length is 256. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| hwifVLANTrunkAllowListLow | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.6 | ||
| VLANs allowed by the VLAN port. The lowest number of VLANs: 2048 (1 to 2048), and the length is 256. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| hwifVLANTrunkAllowListHigh | 1.3.6.1.4.1.2011.2.23.1.5.1.3.1.7 | ||
| VLANs allowed by the VLAN port. The highest number of VLANs: 2046 (2049 to 4094), and the length is 256. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| hwethernetTable | 1.3.6.1.4.1.2011.2.23.1.5.1.4 | ||
| Ethernet port attribute table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HwEthernetEntry | |||
| hwethernetEntry | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1 | ||
| Entries of Ethernet port attribute table | |||
| OBJECT-TYPE | |||
| HwEthernetEntry | |||
| hwifEthernetDuplex | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.3 | ||
| Ethernet interface mode. | |||
| OBJECT-TYPE | |||
| INTEGER | full(1), half(2), auto(3) | ||
| hwifEthernetMTU | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.4 | ||
| MTU on the Ethernet interface. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..9216 | ||
| hwifEthernetSpeed | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.5 | ||
| Ethernet interface speed. | |||
| OBJECT-TYPE | |||
| INTEGER | auto(0), s10M(10), s100M(100), s1000M(1000), s10000M(10000) | ||
| hwifEthernetMdi | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.7 | ||
| Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3 | |||
| OBJECT-TYPE | |||
| INTEGER | mdi-ii(1), mdi-x(2), mdi-auto(3) | ||
| hwMaxMacLearn | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.8 | ||
| The maximum number of MAC addresses that the port can learn. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| hwifMacAddressLearn | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.9 | ||
| This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| hwifEthernetTest | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.10 | ||
| Test this interface. The actual testing will be different according to products. Read operation not supported. | |||
| OBJECT-TYPE | |||
| INTEGER | test(1) | ||
| hwifMacAddrLearnMode | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.11 | ||
| Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning. | |||
| OBJECT-TYPE | |||
| INTEGER | iVL(1), sVL(2) | ||
| hwifEthernetFlowInterval | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.12 | ||
| Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5. | |||
| OBJECT-TYPE | |||
| INTEGER | 5..300 | ||
| hwifEthernetIsolate | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.13 | ||
| Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6. | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| hwifVlanVPNStatus | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.14 | ||
| Vlan VPN enable status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| hwifVlanVPNUplinkStatus | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.15 | ||
| Vlan VPN uplink status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| hwifVlanVPNTPID | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.16 | ||
| Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hwVlanVPNTPIDMode to get more information. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..65535 | ||
| hwifIsolateGroupID | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.17 | ||
| Isolate group identifier. Value zero means this interface does not belong to any isolate group. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwifisUplinkPort | 1.3.6.1.4.1.2011.2.23.1.5.1.4.1.18 | ||
| Ethernet uplink status, default value is 2. | |||
| OBJECT-TYPE | |||
| INTEGER | yes(1), no(2) | ||
| hwIsolateGroupMax | 1.3.6.1.4.1.2011.2.23.1.5.1.5 | ||
| Max isolate group that this device support, the value is zero means that the device does not support isolate group. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwGlobalBroadcastMaxPps | 1.3.6.1.4.1.2011.2.23.1.5.1.6 | ||
| The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..14881000 | ||
| hwGlobalBroadcastMaxRatio | 1.3.6.1.4.1.2011.2.23.1.5.1.7 | ||
| The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..100 | ||
| hwBpduTunnelStatus | 1.3.6.1.4.1.2011.2.23.1.5.1.8 | ||
| Bpdu tunnel enable status. | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| hwVlanVPNTPIDMode | 1.3.6.1.4.1.2011.2.23.1.5.1.9 | ||
| Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hwifVlanVPNTPID. In this situation, hwVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hwVlanVPNTPID. In this situation, hwifVlanVPNTPID in hwethernetTable has the same value with hwVlanVPNTPID. | |||
| OBJECT-TYPE | |||
| INTEGER | port-based(1), global(2) | ||
| hwVlanVPNTPID | 1.3.6.1.4.1.2011.2.23.1.5.1.10 | ||
| Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..65535 | ||
| hwPortIsolateGroupTable | 1.3.6.1.4.1.2011.2.23.1.5.1.11 | ||
| Isolate Group attribute table. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| HwPortIsolateGroupEntry | |||
| hwPortIsolateGroupEntry | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1 | ||
| The entry of hwPortIsolateGroupTable. | |||
| OBJECT-TYPE | |||
| HwPortIsolateGroupEntry | |||
| hwPortIsolateGroupIndex | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1.1 | ||
| Port isolate group identifier. The index of the hwPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| hwPortIsolateUplinkIfIndex | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1.2 | ||
| Index number of the uplink interface. | |||
| OBJECT-TYPE | |||
| InterfaceIndex | |||
| hwPortIsolateGroupRowStatus | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1.3 | ||
| Current operation status of the row. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| hwPortIsolateGroupDescription | 1.3.6.1.4.1.2011.2.23.1.5.1.11.1.4 | ||
| Port isolate group description, default value is zero-length string. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..80) | ||
| PortList | |||
| Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. | |||
| TEXTUAL-CONVENTION | |||
| OCTET STRING | |||
| VlanIndex | |||
| A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent, i.e. one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q but it is convenient to be able to manage them in the same way using this MIB. | |||
| TEXTUAL-CONVENTION | |||
| Unsigned32 | 0..4294967295 | ||
| InterfaceIndex | |||
| A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | |||
| TEXTUAL-CONVENTION | |||
| Integer32 | |||
| DropDirection | |||
| Representing the direction of dropping packets, if applicable. | |||
| TEXTUAL-CONVENTION | |||
| INTEGER | disable(1), enableInbound(2), enableOutbound(3), enableBoth(4) | ||
| HwIfXXEntry | |||
| SEQUENCE | |||
| TruthValue as hwifUnBoundPort | |||
| TruthValue as hwifISPhyPort | |||
| TruthValue as hwifAggregatePort | |||
| TruthValue as hwifMirrorPort | |||
| INTEGER as hwifVLANType | |||
| INTEGER as hwifMcastControl | |||
| TruthValue as hwifFlowControl | |||
| TruthValue as hwifSrcMacControl | |||
| INTEGER as hwifClearStat | |||
| INTEGER as hwifXXBasePortIndex | |||
| INTEGER as hwifXXDevPortIndex | |||
| Integer32 as hwifPpsMcastControl | |||
| INTEGER as hwifPpsBcastDisValControl | |||
| Integer32 as hwifUniSuppressionStep | |||
| Integer32 as hwifPpsUniSuppressionMax | |||
| Integer32 as hwifMulSuppressionStep | |||
| Integer32 as hwifPpsMulSuppressionMax | |||
| Integer32 as hwifUniSuppression | |||
| Integer32 as hwifPpsUniSuppression | |||
| Integer32 as hwifMulSuppression | |||
| Integer32 as hwifPpsMulSuppression | |||
| INTEGER as hwifComboActivePort | |||
| Integer32 as hwifBMbpsMulSuppressionMax | |||
| Integer32 as hwifBMbpsMulSuppression | |||
| Integer32 as hwifBKbpsMulSuppressionMax | |||
| Integer32 as hwifBKbpsMulSuppressionStep | |||
| Integer32 as hwifBKbpsMulSuppression | |||
| DropDirection as hwifUnknownPacketDropMul | |||
| DropDirection as hwifUnknownPacketDropUni | |||
| HwIfAggregateEntry | |||
| SEQUENCE | |||
| InterfaceIndex as hwifAggregatePortIndex | |||
| OCTET STRING as hwifAggregatePortName | |||
| PortList as hwifAggregatePortListPorts | |||
| INTEGER as hwifAggregateModel | |||
| RowStatus as hwifAggregateOperStatus | |||
| HwifHybridPortEntry | |||
| SEQUENCE | |||
| INTEGER as hwifHybridPortIndex | |||
| OCTET STRING as hwifHybridTaggedVlanListLow | |||
| OCTET STRING as hwifHybridTaggedVlanListHigh | |||
| OCTET STRING as hwifHybridUnTaggedVlanListLow | |||
| OCTET STRING as hwifHybridUnTaggedVlanListHigh | |||
| HwIfVLANTrunkStatusEntry | |||
| SEQUENCE | |||
| InterfaceIndex as hwifVLANTrunkIndex | |||
| INTEGER as hwifVLANTrunkGvrpRegistration | |||
| OCTET STRING as hwifVLANTrunkPassListLow | |||
| OCTET STRING as hwifVLANTrunkPassListHigh | |||
| OCTET STRING as hwifVLANTrunkAllowListLow | |||
| OCTET STRING as hwifVLANTrunkAllowListHigh | |||
| HwEthernetEntry | |||
| SEQUENCE | |||
| INTEGER as hwifEthernetDuplex | |||
| INTEGER as hwifEthernetMTU | |||
| INTEGER as hwifEthernetSpeed | |||
| INTEGER as hwifEthernetMdi | |||
| INTEGER as hwMaxMacLearn | |||
| INTEGER as hwifMacAddressLearn | |||
| INTEGER as hwifEthernetTest | |||
| INTEGER as hwifMacAddrLearnMode | |||
| INTEGER as hwifEthernetFlowInterval | |||
| OCTET STRING as hwifEthernetIsolate | |||
| INTEGER as hwifVlanVPNStatus | |||
| INTEGER as hwifVlanVPNUplinkStatus | |||
| Integer32 as hwifVlanVPNTPID | |||
| Integer32 as hwifIsolateGroupID | |||
| INTEGER as hwifisUplinkPort | |||
| HwPortIsolateGroupEntry | |||
| SEQUENCE | |||
| Integer32 as hwPortIsolateGroupIndex | |||
| InterfaceIndex as hwPortIsolateUplinkIfIndex | |||
| RowStatus as hwPortIsolateGroupRowStatus | |||
| DisplayString as hwPortIsolateGroupDescription | |||