HUB-OPT-MIB

File: HUB-OPT-MIB.mib (6563 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

enterprises OBJECT-TYPE

Defined Objects

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgProtocolGroup 1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER    

cdx6500PCTPortProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER    

cdx6500PPCTHUBPortTable 1.3.6.1.4.1.449.2.1.2.1.1.22
A table of HUB Port configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPCTHUBPortEntry

cdx6500PPCTHUBPortEntry 1.3.6.1.4.1.449.2.1.2.1.1.22.1
A HUB Configuration Table entry. Each entry contains the configuration parameters for a single HUB port.
OBJECT-TYPE    
  Cdx6500PPCTHUBPortEntry  

cdx6500HUBCfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.22.1.1
The HUB port number described by this entry
OBJECT-TYPE    
  INTEGER 13..54  

cdx6500HUBCfgPortLevel 1.3.6.1.4.1.449.2.1.2.1.1.22.1.2
This is the level in which the port will run. Select level on this HUB port as follows: normal - port operating at normal received squelch level. reduced - port operating at reduced receive squelch level.
OBJECT-TYPE    
  INTEGER normal(1), reduced(2)  

cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatProtocolGroup 1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER    

cdx6500PSTPortProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER    

cdx6500PPSTHUBPortStatTable 1.3.6.1.4.1.449.2.1.3.1.1.23
A table of HUB port statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500HUBPortStatEntry

cdx6500HUBPortStatEntry 1.3.6.1.4.1.449.2.1.3.1.1.23.1
A HUB Port Statistic Table entry. Each entry contains the statistics for a single HUB port.
OBJECT-TYPE    
  Cdx6500HUBPortStatEntry  

cdx6500HUBStatPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.23.1.1
The HUB port number described by this entry.
OBJECT-TYPE    
  INTEGER 13..54  

cdx6500HUBPortStatus 1.3.6.1.4.1.449.2.1.3.1.1.23.1.2
Port Status indicates whether or not the port is switched on and is ready for operation. This value may be one of : up - Port is up and running. down - port is down.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

cdx6500HUBPortState 1.3.6.1.4.1.449.2.1.3.1.1.23.1.3
Port State indicates whether or not the port is disabled. This value may be one of : enable - Port is enabled. disable - port is disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

cdx6500HUBPortLevel 1.3.6.1.4.1.449.2.1.3.1.1.23.1.4
This is the level the port will be running. normal - port operating at normal received squelch level. reduced - port operating at reduced receive squelch level.
OBJECT-TYPE    
  INTEGER normal(1), reduced(2)  

cdx6500HUBPortPolarity 1.3.6.1.4.1.449.2.1.3.1.1.23.1.5
Port polarity : nonInverted - port polarity in not inverted. inverted - port polarity is inverted.
OBJECT-TYPE    
  INTEGER nonInverted(1), inverted(2)  

cdx6500Controls 1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER    

Defined Objects

DisplayString  
OCTET STRING    

Cdx6500PPCTHUBPortEntry  
SEQUENCE    
  INTEGER as cdx6500HUBCfgPortNumber  
  INTEGER as cdx6500HUBCfgPortLevel  

Cdx6500HUBPortStatEntry  
SEQUENCE    
  INTEGER as cdx6500HUBStatPortNumber  
  INTEGER as cdx6500HUBPortStatus  
  INTEGER as cdx6500HUBPortState  
  INTEGER as cdx6500HUBPortLevel  
  INTEGER as cdx6500HUBPortPolarity