HpicfHighAvailability-MIB

File: HpicfHighAvailability-MIB.mib (5095 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF HP-ICF-OID

Imported symbols

OBJECT-TYPE MODULE-IDENTITY TimeTicks
Counter32 OBJECT-GROUP MODULE-COMPLIANCE
hpicfCommon

Defined Objects

hpicfHighAvailability 1.3.6.1.4.1.11.2.14.11.1.11
Managment information for configuring Redundant Management module on Hewlett-Packard network devices.
MODULE-IDENTITY    

hpicfHAConfigObjects 1.3.6.1.4.1.11.2.14.11.1.11.1
OBJECT IDENTIFIER    

hpicfHARedundancyManagementModuleMode 1.3.6.1.4.1.11.2.14.11.1.11.1.1
Specify to enable/disable this feature. Enabling allows for management module redundancy when there are two management modules in the switch. Disabling prevents redundancy except due to fatal hardware errors on one management module.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpicfHAStatusObjects 1.3.6.1.4.1.11.2.14.11.1.11.2
OBJECT IDENTIFIER    

hpicfHAMgmtRedundancyFailureReason 1.3.6.1.4.1.11.2.14.11.1.11.2.1
Specifies the reason a redundant management module failed to become a standby module.
OBJECT-TYPE    
  INTEGER noRedundantModule(1), noFailure(2), unknownReason(3), mismatchOS(4), failedSelftest(5), communicationFailure(6), redundancyDisable(7)  

hpicfHAMgmtFailovers 1.3.6.1.4.1.11.2.14.11.1.11.2.2
Specifies the number of management module failovers since last chassis boot.
OBJECT-TYPE    
  Counter32  

hpicfHALastFailoverTime 1.3.6.1.4.1.11.2.14.11.1.11.2.3
Specifies the time (in hundredths of a second) of the last management module failover.
OBJECT-TYPE    
  TimeTicks  

hpicfHAConformance 1.3.6.1.4.1.11.2.14.11.1.11.3
OBJECT IDENTIFIER    

hpicfHACompliances 1.3.6.1.4.1.11.2.14.11.1.11.3.1
OBJECT IDENTIFIER    

hpicfHACompliance 1.3.6.1.4.1.11.2.14.11.1.11.3.1.1
The compliance statement for SNMP entities which implement the hpicfHighAvailability MIB.
MODULE-COMPLIANCE    

hpicfHAGroups 1.3.6.1.4.1.11.2.14.11.1.11.3.2
OBJECT IDENTIFIER    

hpicfHAConfigGroup 1.3.6.1.4.1.11.2.14.11.1.11.3.2.1
The collection of objects which are used to configure the Redundancy Management Module.
OBJECT-GROUP    

hpicfHAStatusGroup 1.3.6.1.4.1.11.2.14.11.1.11.3.2.2
The collection of objects which are used to represent Management Module statistics information.
OBJECT-GROUP