Hub-rptr-prvt

File: Hub-rptr-prvt.mib (22521 bytes)

Imported modules

RFC1155-SMI RFC-1215 SNMP-REPEATER-MIB

Imported symbols

Counter OBJECT-TYPE internet
TRAP-TYPE rptrPortGroupIndex rptrPortIndex
rptrPortAdminStatus

Defined Objects

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

fibronics 1.3.6.1.4.1.22
OBJECT IDENTIFIER    

trap 1.3.6.1.4.1.22.3
OBJECT IDENTIFIER    

traprun 1.3.6.1.4.1.22.3.1
OBJECT IDENTIFIER    

traperm 1.3.6.1.4.1.22.3.2
OBJECT IDENTIFIER    

trapvar 1.3.6.1.4.1.22.3.3
OBJECT IDENTIFIER    

fm800 1.3.6.1.4.1.22.51
OBJECT IDENTIFIER    

fmsystem 1.3.6.1.4.1.22.51.1
OBJECT IDENTIFIER    

fmsystemrun 1.3.6.1.4.1.22.51.1.1
OBJECT IDENTIFIER    

fmsystemperm 1.3.6.1.4.1.22.51.1.2
OBJECT IDENTIFIER    

fmslot 1.3.6.1.4.1.22.51.2
OBJECT IDENTIFIER    

fmlu 1.3.6.1.4.1.22.51.3
OBJECT IDENTIFIER    

fmdiag 1.3.6.1.4.1.22.51.5
OBJECT IDENTIFIER    

fmdebug 1.3.6.1.4.1.22.51.6
OBJECT IDENTIFIER    

rptrGroupHead1BackupMainActive 1.3.6.1.4.1.22.51.10
Indicates that the MAIN link is active
TRAP-TYPE    
  rptrGroupIndex  

fmethrptr 1.3.6.1.4.1.22.51.11
OBJECT IDENTIFIER    

rptrGroupHead1BackupSecondActive 1.3.6.1.4.1.22.51.11
Indicates that the SECOND link is active
TRAP-TYPE    
  rptrGroupIndex  

rptrinfo 1.3.6.1.4.1.22.51.11.1
OBJECT IDENTIFIER    

rptrGroupPortStatus 1.3.6.1.4.1.22.51.11.1
Issued when the port changed its status
TRAP-TYPE    
  rptrPortGroupIndex  
  rptrPortIndex  
  rptrPortAdminStatus  

rptrRxDscrptrOverFlow 1.3.6.1.4.1.22.51.11.1.1
This counter reflects the number of the missed received packets due to lack of resourcees such as descriptors or memory buffers
OBJECT-TYPE    
  Counter  

rptrTxDscrptrOverFlow 1.3.6.1.4.1.22.51.11.1.2
This counter is incremented evry time there is a transmit over flow
OBJECT-TYPE    
  Counter  

rptrMemoryErrors 1.3.6.1.4.1.22.51.11.1.3
This counter is incremented evry time there is a memory error
OBJECT-TYPE    
  Counter  

rptrJabberCounter 1.3.6.1.4.1.22.51.11.1.4
This counter is incremented evry time there is a jubber in one of the ports.
OBJECT-TYPE    
  Counter  

rptrNMSConnectionPort 1.3.6.1.4.1.22.51.11.1.5
Returns the port number which the NMS is connected.
OBJECT-TYPE    
  INTEGER  

rptrEDBPort 1.3.6.1.4.1.22.51.11.1.6
Returns the port number which the MultiHub (EDB) is connected to. if the MultiHub is not connected to the card the value returned will be 99, if the card is installed in a stand alone chassis then reading this object will return 99
OBJECT-TYPE    
  INTEGER  

rptrgroup 1.3.6.1.4.1.22.51.11.2
OBJECT IDENTIFIER    

rptrGroupJabberFaultStatus 1.3.6.1.4.1.22.51.11.2
Issued when the port enters the jabber lock state
TRAP-TYPE    
  rptrGroupIndex  
  rptrGroupPortIndex  
  rptrGroupJabberError  

rptrfmGroupTable 1.3.6.1.4.1.22.51.11.2.1
OBJECT-TYPE    
  SEQUENCE OF  
    RptrfmGroupEntry

rptrfmGroupEntry 1.3.6.1.4.1.22.51.11.2.1.1
OBJECT-TYPE    
  RptrfmGroupEntry  

rptrGroupIndex 1.3.6.1.4.1.22.51.11.2.1.1.1
Group Number
OBJECT-TYPE    
  INTEGER  

rptrGroupGlobalStatus 1.3.6.1.4.1.22.51.11.2.1.1.2
8 bytes. 60 status bits of the card. For more information about the meaning of the status, read the specific user manual of each card. The channel leds are encoded into 2 bytes.
OBJECT-TYPE    
  OCTET STRING  

rptrGroupPrevStatus 1.3.6.1.4.1.22.51.11.2.1.1.3
8 bytes. Previous 60 status bits of the card. This object id is used mainly for traps (see Card Trap)
OBJECT-TYPE    
  OCTET STRING  

rptrGroupGlobalError 1.3.6.1.4.1.22.51.11.2.1.1.4
Group Global Fault status. If the value is one - there is a fault in the card.
OBJECT-TYPE    
  INTEGER fault-exist(1), no-fault-exist(2)  

rptrGroupJabberError 1.3.6.1.4.1.22.51.11.2.1.1.5
Jabber Fault status. If the value is one - there is a jabber event.
OBJECT-TYPE    
  INTEGER fault-exist(1), no-fault-exist(2)  

rptrGroupCpuError 1.3.6.1.4.1.22.51.11.2.1.1.6
CPU Fault status. If the value is one - there is a CPU fault in the card.
OBJECT-TYPE    
  INTEGER fault-exist(1), no-fault-exist(2)  

rptrGroupSQE 1.3.6.1.4.1.22.51.11.2.1.1.7
Group SQE Fault status (for AUI module (339)). If the value is one - there is an SQE indication to the card.
OBJECT-TYPE    
  INTEGER fault-exist(1), no-fault-exist(2)  

rptrGroupRepeaterBlockError 1.3.6.1.4.1.22.51.11.2.1.1.8
Repeater Block Fault status. If the value is one - there is a fault in the repeater block.
OBJECT-TYPE    
  INTEGER fault-exist(1), no-fault-exist(2)  

rptrGroupAutoPartition 1.3.6.1.4.1.22.51.11.2.1.1.9
Group Auto partition Fault status. If the value is one - at least one of the ports is in auto-partition.
OBJECT-TYPE    
  INTEGER fault-exist(1), no-fault-exist(2)  

rptrGroupDetachStatus 1.3.6.1.4.1.22.51.11.2.1.1.10
Global Detach status. If the value is one - at least one of the ports is detached.
OBJECT-TYPE    
  INTEGER detach-exist(1), no-detach-exist(2)  

rptrGroupGlobalCommandCode 1.3.6.1.4.1.22.51.11.2.1.1.11
Enable the user to attach/detach all repeater ports. Note: in case off detach command - all port will detach except the port on which the last NMS message was received. when reading this object the value returned is always attach-all-ports(1)
OBJECT-TYPE    
  INTEGER attach-all-ports(1), detach-all-ports(2)  

rptrGroupTrapMask 1.3.6.1.4.1.22.51.11.2.1.1.12
When setting this variable to mask-info(4) then only all traps will be sent. When setting this variable to mask-warn(3) then only traps with severity of warn or fatal will be sent.When setting this variable to mask-fatal(2) then only traps with severity of fatal will be sent. When setting this variable to mask-all(1) then no traps will be sent.
OBJECT-TYPE    
  INTEGER mask-all(1), mask-fatal(2), mask-warn(3), mask-info(4)  

rptrGroupLinkSelectHead1 1.3.6.1.4.1.22.51.11.2.1.1.13
Enable the user to switch between MAIN and SECOND link only in Head module in the 303 type cards.
OBJECT-TYPE    
  INTEGER toggle-link-select(1)  

rptrGroupBackupHead1State 1.3.6.1.4.1.22.51.11.2.1.1.14
Enable the user to enable or disable the backup port for Head module only in 303 cards. when set to enabled(1) the active port will be the primary port, when set to disabled(2) the active port will be the secondary port and when set to normal(3) the active port will be set by the backup algorithm
OBJECT-TYPE    
  INTEGER enable(1), disable(2), normal(3)  

rptrGroupTailState 1.3.6.1.4.1.22.51.11.2.1.1.15
Enable the user to enable or disable Tail in 303 card
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rptrGroupMaxModuleNumber 1.3.6.1.4.1.22.51.11.2.1.1.16
Maximum Number of modules in a group.
OBJECT-TYPE    
  INTEGER  

rptrgroupport 1.3.6.1.4.1.22.51.11.3
OBJECT IDENTIFIER    

rptrGroupCPUFaultStatus 1.3.6.1.4.1.22.51.11.3
Issued when a CPU fault is detected
TRAP-TYPE    
  rptrGroupIndex  
  rptrGroupCpuError  

rptrGroupPortTable 1.3.6.1.4.1.22.51.11.3.1
OBJECT-TYPE    
  SEQUENCE OF  
    RptrGroupPortEntry

rptrGroupPortEntry 1.3.6.1.4.1.22.51.11.3.1.1
OBJECT-TYPE    
  RptrGroupPortEntry  

rptrGroupPIndex 1.3.6.1.4.1.22.51.11.3.1.1.1
Group Number
OBJECT-TYPE    
  INTEGER  

rptrGroupPortIndex 1.3.6.1.4.1.22.51.11.3.1.1.2
Port Number
OBJECT-TYPE    
  INTEGER  

rptrGroupPortLinkStatus 1.3.6.1.4.1.22.51.11.3.1.1.3
When the value is 1, link status is O.K.
OBJECT-TYPE    
  INTEGER link-ok(1), link-not-ok(2), link-not-applicable(3)  

rptrGroupPortRcvStatus 1.3.6.1.4.1.22.51.11.3.1.1.4
This object describes the receive status of the port, When a port is receiveing data the object gets the value receive(1), when the port does not receive any data the object gets the value no-receive(2)
OBJECT-TYPE    
  INTEGER receive(1), no-receive(2)  

rptrGroupPortLinkFaultCounter 1.3.6.1.4.1.22.51.11.3.1.1.5
This counter is incremented evry time a link change is detected in the port. A link change is encountered on the port whenever the link is disappearing or apearing on the port
OBJECT-TYPE    
  Counter  

rptrGroupPortAutoPartitionCount 1.3.6.1.4.1.22.51.11.3.1.1.6
This counter is incremented evry time there is a Auto Partition state in the port.
OBJECT-TYPE    
  Counter  

rptrGroupPortAutoPartitionType 1.3.6.1.4.1.22.51.11.3.1.1.7
Auto Partition type.
OBJECT-TYPE    
  INTEGER collision-limit(1), collision-length-limit(2), loopback-failure(3), cpu-forced-reconnection(4), none(5)  

rptrgroupmodule 1.3.6.1.4.1.22.51.11.4
OBJECT IDENTIFIER    

rptrGroupSQEStatus 1.3.6.1.4.1.22.51.11.4
Issued when a SQE error is detected
TRAP-TYPE    
  rptrGroupIndex  
  rptrGroupPortIndex  
  rptrGroupSQE  

rptrGroupModuleTable 1.3.6.1.4.1.22.51.11.4.1
OBJECT-TYPE    
  SEQUENCE OF  
    RptrGroupModuleEntry

rptrGroupModuleEntry 1.3.6.1.4.1.22.51.11.4.1.1
OBJECT-TYPE    
  RptrGroupModuleEntry  

rptrGroupMIndex 1.3.6.1.4.1.22.51.11.4.1.1.1
Group Number
OBJECT-TYPE    
  INTEGER  

rptrGroupModuleIndex 1.3.6.1.4.1.22.51.11.4.1.1.2
Module Number
OBJECT-TYPE    
  INTEGER  

rptrGroupModuleStructInfo 1.3.6.1.4.1.22.51.11.4.1.1.3
List of modules numnbers: eM892.330 /* BLANK */ EM892.331 /* FO single port */ EM892.332 /* FO dual port */ EM892.333 /* COAX single port */ EM892.334 /* COAX dual port */ EM892.332B /* FO dual port for Dual Homing */ EM892.335 /* 10BASET single port */ EM892.337 /* DTE */ EM892.336 /* 10BASET dual port */ EM892.339 /* AUI */
OBJECT-TYPE    
  INTEGER em892-330-blank(1), em892-331-fo1(2), em892-332-fo2(3), em892-333-cx1(4), em892-334-cx2(5), em892-332b-fo2b(6), em892-335-tp1(7), em892-337-dte(8), em892-336-tp2(9), em892-339-aui(10)  

rptrGroupModuleBackupState 1.3.6.1.4.1.22.51.11.4.1.1.4
Enable the user to overide the backup switch (enable/disable). or let the state be as the switch is (hardware) This object applies only to the 308 card. setting this object will take effect only after the next reset or power up of the card.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), hardware(3)  

rptrGroupRepeaterBlockFaultStatus 1.3.6.1.4.1.22.51.11.5
Issued when a repeater block error is detected
TRAP-TYPE    
  rptrGroupIndex  
  rptrGroupRepeaterBlockError  

rptrGroupPortAutoPartitionStatus 1.3.6.1.4.1.22.51.11.6
Issued when the port is auto partitioned
TRAP-TYPE    
  rptrGroupPIndex  
  rptrGroupPortIndex  
  rptrGroupPortAutoPartitionType  

rptrGroupTrap 1.3.6.1.4.1.22.51.11.7
Generated when a significant status has changed in a group. By xoring the 2 statuses, the NMS can identify the cause of the trap.
TRAP-TYPE    
  rptrGroupIndex  
  rptrGroupGlobalStatus  
  rptrGroupPrevStatus  

rptrGroupPortLinkStatus2 1.3.6.1.4.1.22.51.11.8
Issued when the link status of the port changed its status
TRAP-TYPE    
  rptrPortGroupIndex  
  rptrPortIndex  
  rptrGroupPortLinkStatus  

rptrGroupDetachNmsPort 1.3.6.1.4.1.22.51.11.9
Issued when the port connected to the NMS Is not dettached by a detach command received from the NMS
TRAP-TYPE    
  rptrNMSConnectionPort  

rptrGroupDetachEdbPort 1.3.6.1.4.1.22.51.11.12
Issued when the port connected to the EDB Is not dettached by a detach command received from the NMS
TRAP-TYPE    
  rptrEDBPort  

Defined Objects

RptrfmGroupEntry  
SEQUENCE    
  INTEGER as rptrGroupIndex  
  OCTET STRING as rptrGroupGlobalStatus  
  OCTET STRING as rptrGroupPrevStatus  
  INTEGER as rptrGroupGlobalError  
  INTEGER as rptrGroupJabberError  
  INTEGER as rptrGroupCpuError  
  INTEGER as rptrGroupSQE  
  INTEGER as rptrGroupRepeaterBlockError  
  INTEGER as rptrGroupAutoPartition  
  INTEGER as rptrGroupDetachStatus  
  INTEGER as rptrGroupGlobalCommandCode  
  INTEGER as rptrGroupTrapMask  
  INTEGER as rptrGroupLinkSelectHead1  
  INTEGER as rptrGroupBackupHead1State  
  INTEGER as rptrGroupTailState  
  INTEGER as rptrGroupMaxModuleNumber  

RptrGroupPortEntry  
SEQUENCE    
  INTEGER as rptrGroupPIndex  
  INTEGER as rptrGroupPortIndex  
  INTEGER as rptrGroupPortLinkStatus  
  INTEGER as rptrGroupPortRcvStatus  
  Counter as rptrGroupPortLinkFaultCounter  
  Counter as rptrGroupPortAutoPartitionCount  
  INTEGER as rptrGroupPortAutoPartitionType  

RptrGroupModuleEntry  
SEQUENCE    
  INTEGER as rptrGroupMIndex  
  INTEGER as rptrGroupModuleIndex  
  INTEGER as rptrGroupModuleStructInfo  
  INTEGER as rptrGroupModuleBackupState