
| SNMPv2-SMI | SNMPv2-TC | SNMPv2-CONF |
| RFC1213-MIB |
| MODULE-IDENTITY | OBJECT-TYPE | NOTIFICATION-TYPE |
| Integer32 | Counter32 | Unsigned32 |
| DisplayString | MacAddress | RowStatus |
| TruthValue | MODULE-COMPLIANCE | OBJECT-GROUP |
| NOTIFICATION-GROUP | ifIndex |
| member-body | 1.2 | ||
| OBJECT IDENTIFIER | |||
| us | 1.2.840 | ||
| OBJECT IDENTIFIER | |||
| ieee802dot11 | 1.2.840.10036 | ||
| The MIB module for IEEE 802.11 entities. iso(1).member-body(2).us(840).ieee802dot11(10036) | |||
| MODULE-IDENTITY | |||
| dot11smt | 1.2.840.10036.1 | ||
| OBJECT IDENTIFIER | |||
| dot11StationConfigTable | 1.2.840.10036.1.1 | ||
| Station Configuration attributes. In tablular form to allow for multiple instances on an agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11StationConfigEntry | |||
| dot11StationConfigEntry | 1.2.840.10036.1.1.1 | ||
| An entry in the dot11StationConfigTable. It is possible for there to be multiple IEEE 802.11 interfaces on one agent, each with its unique MAC address. The relationship between an IEEE 802.11 interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11StationConfigEntry | |||
| dot11StationID | 1.2.840.10036.1.1.1.1 | ||
| The purpose of dot11StationID is to allow a manager to identify a station for its own purposes. This attribute provides for that eventuality while keeping the true MAC address independent. Its syntax is MAC address, and the default value is the station's assigned, unique MAC address. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| dot11MediumOccupancyLimit | 1.2.840.10036.1.1.1.2 | ||
| This attribute shall indicate the maximum amount of time, in TU, that a point coordinator (PC) may control the usage of the wireless medium (WM) without relinquishing control for long enough to allow at least one instance of DCF access to the medium. The default value of this attribute shall be 100, and the maximum value shall be 1000. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..1000 | ||
| dot11CFPollable | 1.2.840.10036.1.1.1.3 | ||
| When this attribute is true, it shall indicate that the STA is able to respond to a CF-Poll with a data frame within a SIFS time. This attribute shall be false if the STA is not able to respond to a CF-Poll with a data frame within a SIFS time. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11CFPPeriod | 1.2.840.10036.1.1.1.4 | ||
| The attribute shall describe the number of DTIM intervals between the start of CFPs. It is modified by MLME-START.request primitive. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| dot11CFPMaxDuration | 1.2.840.10036.1.1.1.5 | ||
| The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START.request primitive. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| dot11AuthenticationResponseTimeOut | 1.2.840.10036.1.1.1.6 | ||
| This attribute shall specify the number of time units (TUs) that a responding STA should wait for the next frame in the authentication sequence. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4294967295 | ||
| dot11PrivacyOptionImplemented | 1.2.840.10036.1.1.1.7 | ||
| This attribute, when true, shall indicate that the IEEE 802.11 WEP option is implemented. The default value of this attribute shall be false. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11PowerManagementMode | 1.2.840.10036.1.1.1.8 | ||
| This attribute shall specify the power management mode of the STA. When set to active, it shall indicate that the station is not in power-save (PS) mode. When set to powersave, it shall indicate that the station is in power-save mode. The power management mode is transmitted in all frames according to the rules in 7.1.3.1.7. | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), powersave(2) | ||
| dot11DesiredSSID | 1.2.840.10036.1.1.1.9 | ||
| This attribute reflects the Service Set ID (SSID) used in the DesiredSSID parameter of the most recent MLME_Scan.request. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(0..32) | ||
| dot11DesiredBSSType | 1.2.840.10036.1.1.1.10 | ||
| This attribute shall specify the type of BSS the station shall use when scanning for a BSS with which to synchronize. This value is used to filter Probe Response frames and Beacons. When set to infrastructure, the station shall only synchronize with a BSS whose Capability Information field has the ESS subfield set to 1. When set to independent, the station shall only synchronize with a BSS whose Capability Information field has the IBSS subfield set to 1. When set to any, the station may synchronize to either type of BSS. | |||
| OBJECT-TYPE | |||
| INTEGER | infrastructure(1), independent(2), any(3) | ||
| dot11OperationalRateSet | 1.2.840.10036.1.1.1.11 | ||
| This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..126) | ||
| dot11BeaconPeriod | 1.2.840.10036.1.1.1.12 | ||
| This attribute shall specify the number of TUs that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| dot11DTIMPeriod | 1.2.840.10036.1.1.1.13 | ||
| This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| dot11AssociationResponseTimeOut | 1.2.840.10036.1.1.1.14 | ||
| This attribute shall specify the number of TU that a requesting STA should wait for a response to a transmitted association-request MMPDU. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4294967295 | ||
| dot11DisassociateReason | 1.2.840.10036.1.1.1.15 | ||
| This attribute holds the most recently transmitted Reason Code in a Disassociation frame. If no Disassociation frame has been transmitted, the value of this attribute shall be 0. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| dot11DisassociateStation | 1.2.840.10036.1.1.1.16 | ||
| This attribute holds the MAC address from the Address 1 field of the most recently transmitted Disassociation frame. If no Disassociation frame has been transmitted, the value of this attribute shall be 0. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| dot11DeauthenticateReason | 1.2.840.10036.1.1.1.17 | ||
| This attribute holds the most recently transmitted Reason Code in a Deauthentication frame. If no Deauthentication frame has been transmitted, the value of this attribute shall be 0. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| dot11DeauthenticateStation | 1.2.840.10036.1.1.1.18 | ||
| This attribute holds the MAC address from the Address 1 field of the most recently transmitted Deauthentication frame. If no Deauthentication frame has been transmitted, the value of this attribute shall be 0. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| dot11AuthenticateFailStatus | 1.2.840.10036.1.1.1.19 | ||
| This attribute holds the most recently transmitted Status Code in a failed Authentication frame. If no failed Authentication frame has been transmitted, the value of this attribute shall be 0. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| dot11AuthenticateFailStation | 1.2.840.10036.1.1.1.20 | ||
| This attribute holds the MAC address from the Address 1 field of the most recently transmitted failed Authentication frame. If no failed Authentication frame has been transmitted, the value of this attribute shall be 0. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| dot11MultiDomainCapabilityImplemented | 1.2.840.10036.1.1.1.21 | ||
| This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple regulatory domains. The capability is disabled, otherwise. The default value of this attribute is FALSE. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11MultiDomainCapabilityEnabled | 1.2.840.10036.1.1.1.22 | ||
| This attribute, when TRUE, indicates that the capability of the station to operate in multiple regulatory domains is enabled. The capability is disabled, otherwise. The default value of this attribute is FALSE. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11CountryString | 1.2.840.10036.1.1.1.23 | ||
| This attribute identifies the country in which the station is operating. The first two octets of this string is the two character country code as described in document ISO/IEC 3166-1. The third octet shall be one of the following: 1. an ASCII space character, if the regulations under which the station is operating encompass all environments in the country, 2. an ASCII 'O' character, if the regulations under which the station is operating are for an Outdoor environment only, or 3. an ASCII 'I' character, if the regulations under which the station is operating are for an Indoor environment only. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(3) | ||
| dot11AuthenticationAlgorithmsTable | 1.2.840.10036.1.2 | ||
| This (conceptual) table of attributes shall be a set of all the authentication algorithms supported by the stations. The following are the default values and the associated algorithm: Value = 1: Open System Value = 2: Shared Key | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11AuthenticationAlgorithmsEntry | |||
| dot11AuthenticationAlgorithmsEntry | 1.2.840.10036.1.2.1 | ||
| An Entry (conceptual row) in the Authentication Algorithms Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11AuthenticationAlgorithmsEntry | |||
| dot11AuthenticationAlgorithmsIndex | 1.2.840.10036.1.2.1.1 | ||
| The auxiliary variable used to identify instances of the columnar objects in the Authentication Algorithms Table. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11AuthenticationAlgorithm | 1.2.840.10036.1.2.1.2 | ||
| This attribute shall be a set of all the authentication algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = 1: Open System Value = 2: Shared Key | |||
| OBJECT-TYPE | |||
| INTEGER | openSystem(1), sharedKey(2) | ||
| dot11AuthenticationAlgorithmsEnable | 1.2.840.10036.1.2.1.3 | ||
| This attribute, when true at a station, shall enable the acceptance of the authentication algorithm described in the corresponding table entry in authentication frames received by the station that have odd authentication sequence numbers. The default value of this attribute shall be 1 for the Open System table entry and 2 for all other table entries. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11WEPDefaultKeysTable | 1.2.840.10036.1.3 | ||
| Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and values of null or zero. The default value of each WEP default key shall be null. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11WEPDefaultKeysEntry | |||
| dot11WEPDefaultKeysEntry | 1.2.840.10036.1.3.1 | ||
| An Entry (conceptual row) in the WEP Default Keys Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11WEPDefaultKeysEntry | |||
| dot11WEPDefaultKeyIndex | 1.2.840.10036.1.3.1.1 | ||
| The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1 | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4 | ||
| dot11WEPDefaultKeyValue | 1.2.840.10036.1.3.1.2 | ||
| A WEP default secret key value. | |||
| OBJECT-TYPE | |||
| WEPKeytype | |||
| dot11WEPKeyMappingsTable | 1.2.840.10036.1.4 | ||
| Conceptual table for WEP Key Mappings. The MIB supports the ability to share a separate WEP key for each RA/TA pair. The Key Mappings Table contains zero or one entry for each MAC address and contains two fields for each entry: WEPOn and the corresponding WEP key. The WEP key mappings are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and values of null or zero. The default value for all WEPOn fields is false. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11WEPKeyMappingsEntry | |||
| dot11WEPKeyMappingsEntry | 1.2.840.10036.1.4.1 | ||
| An Entry (conceptual row) in the WEP Key Mappings Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11WEPKeyMappingsEntry | |||
| dot11WEPKeyMappingIndex | 1.2.840.10036.1.4.1.1 | ||
| The auxiliary variable used to identify instances of the columnar objects in the WEP Key Mappings Table. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11WEPKeyMappingAddress | 1.2.840.10036.1.4.1.2 | ||
| The MAC address of the STA for which the values from this key mapping entry are to be used. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| dot11WEPKeyMappingWEPOn | 1.2.840.10036.1.4.1.3 | ||
| Boolean as to whether WEP is to be used when communicating with the dot11WEPKeyMappingAddress STA. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11WEPKeyMappingValue | 1.2.840.10036.1.4.1.4 | ||
| A WEP secret key value. | |||
| OBJECT-TYPE | |||
| WEPKeytype | |||
| dot11WEPKeyMappingStatus | 1.2.840.10036.1.4.1.5 | ||
| The status column used for creating, modifying, and deleting instances of the columnar objects in the WEP key mapping Table. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| dot11PrivacyTable | 1.2.840.10036.1.5 | ||
| Group containing attributes concerned with IEEE 802.11 Privacy. Created as a table to allow multiple instantiations on an agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PrivacyEntry | |||
| dot11PrivacyEntry | 1.2.840.10036.1.5.1 | ||
| An entry in the dot11PrivacyTable Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PrivacyEntry | |||
| dot11PrivacyInvoked | 1.2.840.10036.1.5.1.1 | ||
| When this attribute is true, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be false. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11WEPDefaultKeyID | 1.2.840.10036.1.5.1.2 | ||
| This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of zero, one, two, or three. The default value of this attribute shall be 0. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..3 | ||
| dot11WEPKeyMappingLength | 1.2.840.10036.1.5.1.3 | ||
| The maximum number of tuples that dot11WEPKeyMappings can hold. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 10..4294967295 | ||
| dot11ExcludeUnencrypted | 1.2.840.10036.1.5.1.4 | ||
| When this attribute is true, the STA shall not indicate at the MAC service interface received MSDUs that have the WEP subfield of the Frame Control field equal to zero. When this attribute is false, the STA may accept MSDUs that have the WEP subfield of the Frame Control field equal to zero. The default value of this attribute shall be false. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11WEPICVErrorCount | 1.2.840.10036.1.5.1.5 | ||
| This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to one and the value of the ICV as received in the frame does not match the ICV value that is calculated for the contents of the received frame. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11WEPExcludedCount | 1.2.840.10036.1.5.1.6 | ||
| This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to zero and the value of dot11ExcludeUnencrypted causes that frame to be discarded. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11SMTnotification | 1.2.840.10036.1.6 | ||
| OBJECT IDENTIFIER | |||
| dot11Disassociate | 1.2.840.10036.1.6.0.1 | ||
| The disassociate notification shall be sent when the STA sends a Disassociation frame. The value of the notification shall include the MAC address of the MAC to which the Disassociation frame was sent and the reason for the disassociation. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| NOTIFICATION-TYPE | |||
| ifIndex | |||
| dot11DisassociateReason | |||
| dot11DisassociateStation | |||
| dot11Deauthenticate | 1.2.840.10036.1.6.0.2 | ||
| The deauthenticate notification shall be sent when the STA sends a Deauthentication frame. The value of the notification shall include the MAC address of the MAC to which the Deauthentication frame was sent and the reason for the deauthentication. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| NOTIFICATION-TYPE | |||
| ifIndex | |||
| dot11DeauthenticateReason | |||
| dot11DeauthenticateStation | |||
| dot11AuthenticateFail | 1.2.840.10036.1.6.0.3 | ||
| The authenticate failure notification shall be sent when the STA sends an Authentication frame with a status code other than 'successful'. The value of the notification shall include the MAC address of the MAC to which the Authentication frame was sent and the reason for the authentication failure. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| NOTIFICATION-TYPE | |||
| ifIndex | |||
| dot11AuthenticateFailStatus | |||
| dot11AuthenticateFailStation | |||
| dot11MultiDomainCapabilityTable | 1.2.840.10036.1.7 | ||
| This (conceptual) table of attributes for cross-domain mobility. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11MultiDomainCapabilityEntry | |||
| dot11MultiDomainCapabilityEntry | 1.2.840.10036.1.7.1 | ||
| An entry (conceptual row) in the Multiple Domain Capability Table. IfIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11MultiDomainCapabilityEntry | |||
| dot11MultiDomainCapabilityIndex | 1.2.840.10036.1.7.1.1 | ||
| The auxiliary variable used to identify instances of the columnar objects in the Multi Domain Capability Table. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11FirstChannelNumber | 1.2.840.10036.1.7.1.2 | ||
| This attribute shall indicate the value of the lowest channel number in the subband for the associated domain country string. The default value of this attribute shall be zero. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11NumberofChannels | 1.2.840.10036.1.7.1.3 | ||
| This attribute shall indicate the value of the total number of channels allowed in the subband for the associated domain country string. The default value of this attribute shall be zero. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11MaximumTransmitPowerLevel | 1.2.840.10036.1.7.1.4 | ||
| This attribute shall indicate the maximum transmit power, in dBm, allowed in the subband for the associated domain country string. The default value of this attribute shall be zero. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11mac | 1.2.840.10036.2 | ||
| OBJECT IDENTIFIER | |||
| dot11OperationTable | 1.2.840.10036.2.1 | ||
| Group contains MAC attributes pertaining to the operation of the MAC. This has been implemented as a table in order to allow for multiple instantiations on an agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11OperationEntry | |||
| dot11OperationEntry | 1.2.840.10036.2.1.1 | ||
| An entry in the dot11OperationEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11OperationEntry | |||
| dot11MACAddress | 1.2.840.10036.2.1.1.1 | ||
| Unique MAC Address assigned to the STA. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| dot11RTSThreshold | 1.2.840.10036.2.1.1.2 | ||
| This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2347 | ||
| dot11ShortRetryLimit | 1.2.840.10036.2.1.1.3 | ||
| This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| dot11LongRetryLimit | 1.2.840.10036.2.1.1.4 | ||
| This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is greater than dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 4. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| dot11FragmentationThreshold | 1.2.840.10036.2.1.1.5 | ||
| This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256. | |||
| OBJECT-TYPE | |||
| INTEGER | 256..2346 | ||
| dot11MaxTransmitMSDULifetime | 1.2.840.10036.2.1.1.6 | ||
| The MaxTransmitMSDULifetime shall be the elapsed time in TU, after the initial transmission of an MSDU, after which further attempts to transmit the MSDU shall be terminated. The default value of this attribute shall be 512. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4294967295 | ||
| dot11MaxReceiveLifetime | 1.2.840.10036.2.1.1.7 | ||
| The MaxReceiveLifetime shall be the elapsed time in TU, after the initial reception of a fragmented MMPDU or MSDU, after which further attempts to reassemble the MMPDU or MSDU shall be terminated. The default value shall be 512. | |||
| OBJECT-TYPE | |||
| Unsigned32 | 1..4294967295 | ||
| dot11ManufacturerID | 1.2.840.10036.2.1.1.8 | ||
| The ManufacturerID shall include, at a minimum, the name of the manufacturer. It may include additional information at the manufacturer's discretion. The default value of this attribute shall be null. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..128) | ||
| dot11ProductID | 1.2.840.10036.2.1.1.9 | ||
| The ProductID shall include, at a minimum, an identifier that is unique to the manufacturer. It may include additional information at the manufacturer's discretion. The default value of this attribute shall be null. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..128) | ||
| dot11CountersTable | 1.2.840.10036.2.2 | ||
| Group containing attributes that are MAC counters. Implemented as a table to allow for multiple instantiations on an agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11CountersEntry | |||
| dot11CountersEntry | 1.2.840.10036.2.2.1 | ||
| An entry in the dot11CountersEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11CountersEntry | |||
| dot11TransmittedFragmentCount | 1.2.840.10036.2.2.1.1 | ||
| This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11MulticastTransmittedFrameCount | 1.2.840.10036.2.2.1.2 | ||
| This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11FailedCount | 1.2.840.10036.2.2.1.3 | ||
| This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or dot11LongRetryLimit. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11RetryCount | 1.2.840.10036.2.2.1.4 | ||
| This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11MultipleRetryCount | 1.2.840.10036.2.2.1.5 | ||
| This counter shall increment when an MSDU is successfully transmitted after more than one retransmission. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11FrameDuplicateCount | 1.2.840.10036.2.2.1.6 | ||
| This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11RTSSuccessCount | 1.2.840.10036.2.2.1.7 | ||
| This counter shall increment when a CTS is received in response to an RTS. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11RTSFailureCount | 1.2.840.10036.2.2.1.8 | ||
| This counter shall increment when a CTS is not received in response to an RTS. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11ACKFailureCount | 1.2.840.10036.2.2.1.9 | ||
| This counter shall increment when an ACK is not received when expected. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11ReceivedFragmentCount | 1.2.840.10036.2.2.1.10 | ||
| This counter shall be incremented for each successfully received MPDU of type Data or Management. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11MulticastReceivedFrameCount | 1.2.840.10036.2.2.1.11 | ||
| This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11FCSErrorCount | 1.2.840.10036.2.2.1.12 | ||
| This counter shall increment when an FCS error is detected in a received MPDU. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11TransmittedFrameCount | 1.2.840.10036.2.2.1.13 | ||
| This counter shall increment for each successfully transmitted MSDU. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11WEPUndecryptableCount | 1.2.840.10036.2.2.1.14 | ||
| This counter shall increment when a frame is received with the WEP subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option. | |||
| OBJECT-TYPE | |||
| Counter32 | |||
| dot11GroupAddressesTable | 1.2.840.10036.2.3 | ||
| A conceptual table containing a set of MAC addresses identifying the multicast addresses for which this STA will receive frames. The default value of this attribute shall be null. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11GroupAddressesEntry | |||
| dot11GroupAddressesEntry | 1.2.840.10036.2.3.1 | ||
| An Entry (conceptual row) in the Group Addresses Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11GroupAddressesEntry | |||
| dot11GroupAddressesIndex | 1.2.840.10036.2.3.1.1 | ||
| The auxiliary variable used to identify instances of the columnar objects in the Group Addresses Table. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11Address | 1.2.840.10036.2.3.1.2 | ||
| MAC address identifying a multicast addresses from which this STA will receive frames. | |||
| OBJECT-TYPE | |||
| MacAddress | |||
| dot11GroupAddressesStatus | 1.2.840.10036.2.3.1.3 | ||
| The status column used for creating, modifying, and deleting instances of the columnar objects in the Group Addresses Table. | |||
| OBJECT-TYPE | |||
| RowStatus | |||
| dot11res | 1.2.840.10036.3 | ||
| OBJECT IDENTIFIER | |||
| dot11resAttribute | 1.2.840.10036.3.1 | ||
| OBJECT IDENTIFIER | |||
| dot11ResourceTypeIDName | 1.2.840.10036.3.1.1 | ||
| Contains the name of the Resource Type ID managed object. The attribute is read-only and always contains the value RTID. This attribute value shall not be used as a naming attribute for any other managed object class. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(4) | ||
| dot11ResourceInfoTable | 1.2.840.10036.3.1.2 | ||
| Provides a means of indicating, in data readable from a managed object, information that identifies the source of the implementation. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11ResourceInfoEntry | |||
| dot11ResourceInfoEntry | 1.2.840.10036.3.1.2.1 | ||
| An entry in the dot11ResourceInfo Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11ResourceInfoEntry | |||
| dot11manufacturerOUI | 1.2.840.10036.3.1.2.1.1 | ||
| Takes the value of an organizationally unique identifier. | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(3) | ||
| dot11manufacturerName | 1.2.840.10036.3.1.2.1.2 | ||
| A printable string used to identify the manufacturer of the resource. Maximum string length is 128 octets. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..128) | ||
| dot11manufacturerProductName | 1.2.840.10036.3.1.2.1.3 | ||
| A printable string used to identify the manufacturer's product name of the resource. Maximum string length is 128 octets. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..128) | ||
| dot11manufacturerProductVersion | 1.2.840.10036.3.1.2.1.4 | ||
| Printable string used to identify the manufacturer's product version of the resource. Maximum string length is 128 octets. | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(0..128) | ||
| dot11phy | 1.2.840.10036.4 | ||
| OBJECT IDENTIFIER | |||
| dot11PhyOperationTable | 1.2.840.10036.4.1 | ||
| PHY level attributes concerned with operation. Implemented as a table indexed on ifIndex to allow for multiple instantiations on an Agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PhyOperationEntry | |||
| dot11PhyOperationEntry | 1.2.840.10036.4.1.1 | ||
| An entry in the dot11PhyOperation Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PhyOperationEntry | |||
| dot11PHYType | 1.2.840.10036.4.1.1.1 | ||
| This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, OFDM 5GHz = 04, HRDSSS = 05 | |||
| OBJECT-TYPE | |||
| INTEGER | fhss(1), dsss(2), irbaseband(3), ofdm(4), hrdsss(5) | ||
| dot11CurrentRegDomain | 1.2.840.10036.4.1.1.2 | ||
| The current regulatory domain this instance of the PMD is supporting. This object corresponds to one of the RegDomains listed in dot11RegDomainsSupported. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11TempType | 1.2.840.10036.4.1.1.3 | ||
| There are different operating temperature requirements dependent on the anticipated environmental conditions. This attribute describes the current PHY's operating temperature range capability. Currently defined values and their corresponding temperature ranges are: Type 1 = X'01'-Commercial range of 0 to 40 degrees C, Type 2 = X'02'-Industrial range of -30 to 70 degrees C. | |||
| OBJECT-TYPE | |||
| INTEGER | tempType1(1), tempType2(2) | ||
| dot11PhyAntennaTable | 1.2.840.10036.4.2 | ||
| Group of attributes for PhyAntenna. Implemented as a table indexed on ifIndex to allow for multiple instances on an agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PhyAntennaEntry | |||
| dot11PhyAntennaEntry | 1.2.840.10036.4.2.1 | ||
| An entry in the dot11PhyAntenna Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PhyAntennaEntry | |||
| dot11CurrentTxAntenna | 1.2.840.10036.4.2.1.1 | ||
| The current antenna being used to transmit. This value is one of the values appearing in dot11SupportedTxAntenna. This may be used by a management agent to control which antenna is used for transmission. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..255 | ||
| dot11DiversitySupport | 1.2.840.10036.4.2.1.2 | ||
| This implementation's support for diversity, encoded as: X'01'-diversity is available and is performed over the fixed list of antennas defined in dot11DiversitySelectionRx. X'02'-diversity is not supported. X'03'-diversity is supported and control of diversity is also available, in which case the attribute dot11DiversitySelectionRx can be dynamically modified by the LME. | |||
| OBJECT-TYPE | |||
| INTEGER | fixedlist(1), notsupported(2), dynamic(3) | ||
| dot11CurrentRxAntenna | 1.2.840.10036.4.2.1.3 | ||
| The current antenna being used to receive, if the dot11 DiversitySupport indicates that diversity is not supported. The selected antenna shall be one of the antennae marked for receive in the dot11AntennasListTable. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..255 | ||
| dot11PhyTxPowerTable | 1.2.840.10036.4.3 | ||
| Group of attributes for dot11PhyTxPowerTable. Implemented as a table indexed on STA ID to allow for multiple instances on an Agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PhyTxPowerEntry | |||
| dot11PhyTxPowerEntry | 1.2.840.10036.4.3.1 | ||
| An entry in the dot11PhyTxPower Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PhyTxPowerEntry | |||
| dot11NumberSupportedPowerLevels | 1.2.840.10036.4.3.1.1 | ||
| The number of power levels supported by the PMD. This attribute can have a value of 1 to 8. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| dot11TxPowerLevel1 | 1.2.840.10036.4.3.1.2 | ||
| The transmit output power for LEVEL1 in mW. This is also the default power level. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..10000 | ||
| dot11TxPowerLevel2 | 1.2.840.10036.4.3.1.3 | ||
| The transmit output power for LEVEL2 in mW. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..10000 | ||
| dot11TxPowerLevel3 | 1.2.840.10036.4.3.1.4 | ||
| The transmit output power for LEVEL3 in mW. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..10000 | ||
| dot11TxPowerLevel4 | 1.2.840.10036.4.3.1.5 | ||
| The transmit output power for LEVEL4 in mW. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..10000 | ||
| dot11TxPowerLevel5 | 1.2.840.10036.4.3.1.6 | ||
| The transmit output power for LEVEL5 in mW. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..10000 | ||
| dot11TxPowerLevel6 | 1.2.840.10036.4.3.1.7 | ||
| The transmit output power for LEVEL6 in mW. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..10000 | ||
| dot11TxPowerLevel7 | 1.2.840.10036.4.3.1.8 | ||
| The transmit output power for LEVEL7 in mW. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..10000 | ||
| dot11TxPowerLevel8 | 1.2.840.10036.4.3.1.9 | ||
| The transmit output power for LEVEL8 in mW. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..10000 | ||
| dot11CurrentTxPowerLevel | 1.2.840.10036.4.3.1.10 | ||
| The TxPowerLevel N currently being used to transmit data. Some PHYs also use this value to determine the receiver sensitivity requirements for CCA. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| dot11PhyFHSSTable | 1.2.840.10036.4.4 | ||
| Group of attributes for dot11PhyFHSSTable. Implemented as a table indexed on STA ID to allow for multiple instances on an Agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PhyFHSSEntry | |||
| dot11PhyFHSSEntry | 1.2.840.10036.4.4.1 | ||
| An entry in the dot11PhyFHSS Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PhyFHSSEntry | |||
| dot11HopTime | 1.2.840.10036.4.4.1.1 | ||
| The time in microseconds for the PMD to change from channel 2 to channel 80. | |||
| OBJECT-TYPE | |||
| INTEGER | 224 | ||
| dot11CurrentChannelNumber | 1.2.840.10036.4.4.1.2 | ||
| The current channel number of the frequency output by the RF synthesizer. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..200 | ||
| dot11MaxDwellTime | 1.2.840.10036.4.4.1.3 | ||
| The maximum time in TU that the transmitter is permitted to operate on a single channel. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| dot11CurrentDwellTime | 1.2.840.10036.4.4.1.4 | ||
| The current time in TU that the transmitter shall operate on a single channel, as set by the MAC. Default is 19 TU. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| dot11CurrentSet | 1.2.840.10036.4.4.1.5 | ||
| The current set of patterns the PLME is using to determine the hopping sequence. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| dot11CurrentPattern | 1.2.840.10036.4.4.1.6 | ||
| The current pattern the PLME is using to determine the hop sequence. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..255 | ||
| dot11CurrentIndex | 1.2.840.10036.4.4.1.7 | ||
| The current index value the PLME is using to determine the CurrentChannelNumber. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| dot11EHCCPrimeRadix | 1.2.840.10036.4.4.1.8 | ||
| This attribute indicates the value to be used as the prime radix (N) in the HCC and EHCC algorithms. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11EHCCNumberofChannelsFamilyIndex | 1.2.840.10036.4.4.1.9 | ||
| This attribute indicates the value to be used as the maximum for the family index (a) in the HCC and EHCC algorithms. The value of this field shall not be less than the prime radix minus 3 (N - 3). The valid range of allowed values is (N - 1), (N - 2), and (N - 3). | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11EHCCCapabilityImplemented | 1.2.840.10036.4.4.1.10 | ||
| This attribute, when TRUE, indicates that the station implementation is capable of generating the HCC or EHCC algorithms for determining Hopping patterns. The capability is disabled, otherwise. The default value of this attribute is FALSE. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11EHCCCapabilityEnabled | 1.2.840.10036.4.4.1.11 | ||
| This attribute, when TRUE, indicates that the capability of the station to operate using the HCC or EHCC algorithms for determining Hopping Patterns is enabled. The capability is disabled, otherwise. The default value of this attribute is FALSE. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11HopAlgorithmAdopted | 1.2.840.10036.4.4.1.12 | ||
| This attribute, indicates which of the algorithms will be used to generate the Hopping Patterns. Valid values are: 1 - hopping patterns as defined in clause 14 2 - hop index method (with or without table) 3 - HCC/EHCC method | |||
| OBJECT-TYPE | |||
| INTEGER | crnt(1), hopindex(2), hcc(3) | ||
| dot11RandomTableFlag | 1.2.840.10036.4.4.1.13 | ||
| This attribute, indicates that a Random Table is present when the value is True. When the value is False it indicates that a Random Table is not present and that the hop index method is to be used to determine the hopping sequence. The default value of this attribute is True. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11NumberofHoppingSets | 1.2.840.10036.4.4.1.14 | ||
| The Number of Sets field indicates the total number of sets within the hopping patterns. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11HopModulus | 1.2.840.10036.4.4.1.15 | ||
| The number of allowed channels for the hopping set. This is defined by the governing regulatory agency for the country code of the country in which this device is operating. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11HopOffset | 1.2.840.10036.4.4.1.16 | ||
| The next position in the hopping set. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11PhyDSSSTable | 1.2.840.10036.4.5 | ||
| Entry of attributes for dot11PhyDSSSEntry. Implemented as a table indexed on ifIndex allow for multiple instances on an Agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PhyDSSSEntry | |||
| dot11PhyDSSSEntry | 1.2.840.10036.4.5.1 | ||
| An entry in the dot11PhyDSSSEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PhyDSSSEntry | |||
| dot11CurrentChannel | 1.2.840.10036.4.5.1.1 | ||
| The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in 15.4.6.2 | |||
| OBJECT-TYPE | |||
| INTEGER | 1..14 | ||
| dot11CCAModeSupported | 1.2.840.10036.4.5.1.2 | ||
| dot11CCAModeSupported is a bit-significant value, representing all of the CCA modes supported by the PHY. Valid values are: energy detect only (ED_ONLY) = 01, carrier sense only (CS_ONLY) = 02, carrier sense and energy detect (ED_and_CS)= 04 or the logical sum of any of these values. This attribute shall not be used to indicate the CCA modes supported by a higher rate extension PHY. Rather, the dot11HRCCAModeSupported attribute shall be used to indicate the CCA modes of the higher rate extension PHY. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..7 | ||
| dot11CurrentCCAMode | 1.2.840.10036.4.5.1.3 | ||
| The current CCA method in operation. Valid values are: energy detect only (edonly) = 01, carrier sense only (csonly) = 02, carrier sense and energy detect (edandcs)= 04 carrier sense with timer (cswithtimer)= 08 high rate carrier sense and energy detect (hrcsanded)=16. | |||
| OBJECT-TYPE | |||
| INTEGER | edonly(1), csonly(2), edandcs(4), cswithtimer(8), hrcsanded(16) | ||
| dot11EDThreshold | 1.2.840.10036.4.5.1.4 | ||
| The current Energy Detect Threshold being used by the DSSS PHY. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11PhyIRTable | 1.2.840.10036.4.6 | ||
| Group of attributes for dot11PhyIRTable. Implemented as a table indexed on ifIndex to allow for multiple instances on an Agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PhyIREntry | |||
| dot11PhyIREntry | 1.2.840.10036.4.6.1 | ||
| An entry in the dot11PhyIR Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PhyIREntry | |||
| dot11CCAWatchdogTimerMax | 1.2.840.10036.4.6.1.1 | ||
| This parameter, together with CCAWatchdogCountMax, determines when energy detected in the channel can be ignored. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11CCAWatchdogCountMax | 1.2.840.10036.4.6.1.2 | ||
| This parameter, together with CCAWatchdogTimerMax, determines when energy detected in the channel can be ignored. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11CCAWatchdogTimerMin | 1.2.840.10036.4.6.1.3 | ||
| The minimum value to which CCAWatchdogTimerMax can be set. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11CCAWatchdogCountMin | 1.2.840.10036.4.6.1.4 | ||
| The minimum value to which CCAWatchdogCount can be set. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11RegDomainsSupportedTable | 1.2.840.10036.4.7 | ||
| There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are: FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of Europe) = X'30', Spain = X'31', France = X'32', MKK (Japan) = X'40', Others = X'00' | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11RegDomainsSupportedEntry | |||
| dot11RegDomainsSupportedEntry | 1.2.840.10036.4.7.1 | ||
| An entry in the dot11RegDomainsSupportedTable. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11RegDomainsSupportedEntry | |||
| dot11RegDomainsSupportedIndex | 1.2.840.10036.4.7.1.1 | ||
| The auxiliary variable used to identify instances of the columnar objects in the RegDomainsSupport Table. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11RegDomainsSupportedValue | 1.2.840.10036.4.7.1.2 | ||
| There are different operational requirements dependent on the regulatory domain. This attribute list describes the regulatory domains the PLCP and PMD support in this implementation. Currently defined values and their corresponding Regulatory Domains are: FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of Europe) = X'30', Spain = X'31', France = X'32', MKK (Japan) = X'40' | |||
| OBJECT-TYPE | |||
| INTEGER | fcc(16), doc(32), etsi(48), spain(49), france(50), mkk(64) | ||
| dot11AntennasListTable | 1.2.840.10036.4.8 | ||
| This table represents the list of antennae. An antenna can be marked to be capable of transmitting, receiving, and/or for participation in receive diversity. Each entry in this table represents a single antenna with its properties. The maximum number of antennae that can be contained in this table is 255. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11AntennasListEntry | |||
| dot11AntennasListEntry | 1.2.840.10036.4.8.1 | ||
| An entry in the dot11AntennasListTable, representing the properties of a single antenna. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11AntennasListEntry | |||
| dot11AntennaListIndex | 1.2.840.10036.4.8.1.1 | ||
| The unique index of an antenna which is used to identify the columnar objects in the dot11AntennasList Table. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..255 | ||
| dot11SupportedTxAntenna | 1.2.840.10036.4.8.1.2 | ||
| When true, this object indicates that the antenna represented by dot11AntennaIndex can be used as a transmit antenna. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11SupportedRxAntenna | 1.2.840.10036.4.8.1.3 | ||
| When true, this object indicates that the antenna represented by the dot11AntennaIndex xan be used as a receive antenna. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11DiversitySelectionRx | 1.2.840.10036.4.8.1.4 | ||
| When true, this object indicates that the antenna represented by dot11AntennaIndex can be used for receive diversity. This object may only be true if the antenna can be used as a receive antenna, as indicated by dot11SupportedRxAntenna. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11SupportedDataRatesTxTable | 1.2.840.10036.4.9 | ||
| The Transmit bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s subject to limitations of each individual PHY. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11SupportedDataRatesTxEntry | |||
| dot11SupportedDataRatesTxEntry | 1.2.840.10036.4.9.1 | ||
| An Entry (conceptual row) in the dot11SupportedDataRatesTx Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11SupportedDataRatesTxEntry | |||
| dot11SupportedDataRatesTxIndex | 1.2.840.10036.4.9.1.1 | ||
| Index object which identifies which data rate to access. Range is 1..8. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..8 | ||
| dot11SupportedDataRatesTxValue | 1.2.840.10036.4.9.1.2 | ||
| The Transmit bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s subject to limitations of each individual PHY. | |||
| OBJECT-TYPE | |||
| Integer32 | 2..127 | ||
| dot11SupportedDataRatesRxTable | 1.2.840.10036.4.10 | ||
| The receive bit rates supported by the PLCP and PMD, represented by a count from X'002-X'7f, corresponding to data rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11SupportedDataRatesRxEntry | |||
| dot11SupportedDataRatesRxEntry | 1.2.840.10036.4.10.1 | ||
| An Entry (conceptual row) in the dot11SupportedDataRatesRx Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11SupportedDataRatesRxEntry | |||
| dot11SupportedDataRatesRxIndex | 1.2.840.10036.4.10.1.1 | ||
| Index object which identifies which data rate to access. Range is 1..8. | |||
| OBJECT-TYPE | |||
| Integer32 | 1..8 | ||
| dot11SupportedDataRatesRxValue | 1.2.840.10036.4.10.1.2 | ||
| The receive bit rates supported by the PLCP and PMD, represented by a count from X'02-X'7f, corresponding to data rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s. | |||
| OBJECT-TYPE | |||
| Integer32 | 2..127 | ||
| dot11PhyOFDMTable | 1.2.840.10036.4.11 | ||
| Group of attributes for dot11PhyOFDMTable. Implemented as a table indexed on ifindex to allow for multiple instances on an Agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PhyOFDMEntry | |||
| dot11PhyOFDMEntry | 1.2.840.10036.4.11.1 | ||
| An entry in the dot11PhyOFDM Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PhyOFDMEntry | |||
| dot11CurrentFrequency | 1.2.840.10036.4.11.1.1 | ||
| The number of the current operating frequency channel of the OFDM PHY. | |||
| OBJECT-TYPE | |||
| INTEGER | 0..99 | ||
| dot11TIThreshold | 1.2.840.10036.4.11.1.2 | ||
| The Threshold being used to detect a busy medium (frequency). CCA shall report a busy medium upon detecting the RSSI above this threshold. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11FrequencyBandsSupported | 1.2.840.10036.4.11.1.3 | ||
| The capability of the OFDM PHY implementation to operate in the three U-NII bands. Coded as an integer value of a three bit field as follows: bit 0 .. capable of operating in the lower (5.15-5.25 GHz) U-NII band bit 1 .. capable of operating in the middle (5.25-5.35 GHz) U-NII band bit 2 .. capable of operating in the upper (5.725-5.825 GHz) U-NII band For example, for an implementation capable of operating in the lower and mid bands this attribute would take the value 3. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..7 | ||
| dot11PhyHRDSSSTable | 1.2.840.10036.4.12 | ||
| Entry of attributes for dot11PhyHRDSSSEntry. Implemented as a table indexed on ifIndex to allow for multiple instances on an Agent. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11PhyHRDSSSEntry | |||
| dot11PhyHRDSSSEntry | 1.2.840.10036.4.12.1 | ||
| An entry in the dot11PhyHRDSSSEntry Table. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11PhyHRDSSSEntry | |||
| dot11ShortPreambleOptionImplemented | 1.2.840.10036.4.12.1.1 | ||
| This attribute, when true, shall indicate that the short preamble option as defined in subclause 18.2.2.2 is implemented. The default value of this attribute shall be false. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11PBCCOptionImplemented | 1.2.840.10036.4.12.1.2 | ||
| This attribute, when true, shall indicate that the PBCC modulation option as defined in subclause 18.4.6.6 is implemented. The default value of this attribute shall be false. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11ChannelAgilityPresent | 1.2.840.10036.4.12.1.3 | ||
| This attribute indicates that the PHY is capable of channel agility. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11ChannelAgilityEnabled | 1.2.840.10036.4.12.1.4 | ||
| This attribute indicates that the PHY channel agility functionality is enabled. | |||
| OBJECT-TYPE | |||
| TruthValue | |||
| dot11HRCCAModeSupported | 1.2.840.10036.4.12.1.5 | ||
| dot11HRCCAModeSupported is a bit-significant value, representing all of the CCA modes supported by the PHY. Valid values are: energy detect only (ED_ONLY) = 01, carrier sense only (CS_ONLY) = 02, carrier sense and energy detect (ED_and_CS)= 04, carrier sense with timer (CS_and_Timer)= 08, high rate carrier sense and energy detect (HRCS_and_ED)= 16 or the logical sum of any of these values. In the high rate extension PHY, this attribute shall be used in preference to the dot11CCAModeSupported attribute. | |||
| OBJECT-TYPE | |||
| INTEGER | 1..31 | ||
| dot11HoppingPatternTable | 1.2.840.10036.4.13 | ||
| The (conceptual) table of attributes necessary for a frequency hopping implementation to be able to create the hopping sequences necessary to operate in the subband for the associated domain country string. | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| Dot11HoppingPatternEntry | |||
| dot11HoppingPatternEntry | 1.2.840.10036.4.13.1 | ||
| An entry (conceptual row) in the Hopping Pattern Table that indicates the random hopping sequence to be followed. IfIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB are indexed by ifIndex. | |||
| OBJECT-TYPE | |||
| Dot11HoppingPatternEntry | |||
| dot11HoppingPatternIndex | 1.2.840.10036.4.13.1.1 | ||
| The auxiliary variable used to identify instances of the columnar objects in the Hopping Pattern Table. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11RandomTableFieldNumber | 1.2.840.10036.4.13.1.2 | ||
| This attribute shall indicate the value of the starting channel number in the hopping sequence of the subband for the associated domain country string. The default value of this attribute shall be zero. | |||
| OBJECT-TYPE | |||
| Integer32 | |||
| dot11Conformance | 1.2.840.10036.5 | ||
| OBJECT IDENTIFIER | |||
| dot11Groups | 1.2.840.10036.5.1 | ||
| OBJECT IDENTIFIER | |||
| dot11SMTbase | 1.2.840.10036.5.1.1 | ||
| The SMT object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network. | |||
| OBJECT-GROUP | |||
| dot11SMTprivacy | 1.2.840.10036.5.1.2 | ||
| The SMTPrivacy package is a set of attributes that shall be present if WEP is implemented in the STA. | |||
| OBJECT-GROUP | |||
| dot11MACbase | 1.2.840.10036.5.1.3 | ||
| The MAC object class provides the necessary support for the access control, generation, and verification of frame check sequences (FCSs), and proper delivery of valid data to upper layers. | |||
| OBJECT-GROUP | |||
| dot11MACStatistics | 1.2.840.10036.5.1.4 | ||
| The MACStatistics package provides extended statistical information on the operation of the MAC. This package is completely optional. | |||
| OBJECT-GROUP | |||
| dot11ResourceTypeID | 1.2.840.10036.5.1.5 | ||
| Attributes used to identify a STA, its manufacturer, and various product names and versions. | |||
| OBJECT-GROUP | |||
| dot11SmtAuthenticationAlgorithms | 1.2.840.10036.5.1.6 | ||
| Authentication Algorithm Table. | |||
| OBJECT-GROUP | |||
| dot11PhyOperationComplianceGroup | 1.2.840.10036.5.1.7 | ||
| PHY layer operations attributes. | |||
| OBJECT-GROUP | |||
| dot11PhyAntennaComplianceGroup | 1.2.840.10036.5.1.8 | ||
| Attributes for Data Rates for IEEE 802.11. | |||
| OBJECT-GROUP | |||
| dot11PhyTxPowerComplianceGroup | 1.2.840.10036.5.1.9 | ||
| Attributes for Control and Management of transmit power. | |||
| OBJECT-GROUP | |||
| dot11PhyFHSSComplianceGroup | 1.2.840.10036.5.1.10 | ||
| Attributes that configure the Frequency Hopping for IEEE 802.11. | |||
| OBJECT-GROUP | |||
| dot11PhyDSSSComplianceGroup | 1.2.840.10036.5.1.11 | ||
| Attributes that configure the DSSS for IEEE 802.11. | |||
| OBJECT-GROUP | |||
| dot11PhyIRComplianceGroup | 1.2.840.10036.5.1.12 | ||
| Attributes that configure the baseband IR for IEEE 802.11. | |||
| OBJECT-GROUP | |||
| dot11PhyRegDomainsSupportGroup | 1.2.840.10036.5.1.13 | ||
| Attributes that specify the supported Regulation Domains. | |||
| OBJECT-GROUP | |||
| dot11PhyAntennasListGroup | 1.2.840.10036.5.1.14 | ||
| Attributes that specify the supported Regulation Domains. | |||
| OBJECT-GROUP | |||
| dot11PhyRateGroup | 1.2.840.10036.5.1.15 | ||
| Attributes for Data Rates for IEEE 802.11. | |||
| OBJECT-GROUP | |||
| dot11CountersGroup | 1.2.840.10036.5.1.16 | ||
| Attributes from the dot11CountersGroup that are not described in the dot11MACStatistics group. These objects are mandatory. | |||
| OBJECT-GROUP | |||
| dot11NotificationGroup | 1.2.840.10036.5.1.17 | ||
| IEEE 802.11 notifications | |||
| NOTIFICATION-GROUP | |||
| dot11SMTbase2 | 1.2.840.10036.5.1.18 | ||
| The SMTbase2 object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network. | |||
| OBJECT-GROUP | |||
| dot11PhyOFDMComplianceGroup | 1.2.840.10036.5.1.19 | ||
| Attributes that configure the OFDM for IEEE 802.11. | |||
| OBJECT-GROUP | |||
| dot11SMTbase3 | 1.2.840.10036.5.1.20 | ||
| The SMTbase3 object class provides the necessary support at the STA to manage the processes in the STA such that the STA may work cooperatively as a part of an IEEE 802.11 network, when the STA is capable of multi-domain operation. This object group should be implemented when the multi-domain capability option is implemented. | |||
| OBJECT-GROUP | |||
| dot11MultiDomainCapabilityGroup | 1.2.840.10036.5.1.21 | ||
| The dot11MultiDomainCapabilityGroup object class provides the objects necessary to manage the channels usable by a STA, when the multi-domain capability option is implemented. | |||
| OBJECT-GROUP | |||
| dot11PhyFHSSComplianceGroup2 | 1.2.840.10036.5.1.22 | ||
| Attributes that configure the Frequency Hopping for IEEE 802.11 when multi-domain capability option is implemented. | |||
| OBJECT-GROUP | |||
| dot11PhyHRDSSSComplianceGroup | 1.2.840.10036.5.1.23 | ||
| Attributes that configure the HRDSSS for IEEE 802.11. | |||
| OBJECT-GROUP | |||
| dot11Compliances | 1.2.840.10036.5.2 | ||
| OBJECT IDENTIFIER | |||
| dot11Compliance | 1.2.840.10036.5.2.1 | ||
| The compliance statement for SNMPv2 entities that implement the IEEE 802.11 MIB. | |||
| MODULE-COMPLIANCE | |||
| WEPKeytype | |||
| OCTET STRING | SIZE(5) | ||
| Dot11StationConfigEntry | |||
| SEQUENCE | |||
| MacAddress as dot11StationID | |||
| INTEGER as dot11MediumOccupancyLimit | |||
| TruthValue as dot11CFPollable | |||
| INTEGER as dot11CFPPeriod | |||
| INTEGER as dot11CFPMaxDuration | |||
| Unsigned32 as dot11AuthenticationResponseTimeOut | |||
| TruthValue as dot11PrivacyOptionImplemented | |||
| INTEGER as dot11PowerManagementMode | |||
| OCTET STRING as dot11DesiredSSID | |||
| INTEGER as dot11DesiredBSSType | |||
| OCTET STRING as dot11OperationalRateSet | |||
| INTEGER as dot11BeaconPeriod | |||
| INTEGER as dot11DTIMPeriod | |||
| Unsigned32 as dot11AssociationResponseTimeOut | |||
| INTEGER as dot11DisassociateReason | |||
| MacAddress as dot11DisassociateStation | |||
| INTEGER as dot11DeauthenticateReason | |||
| MacAddress as dot11DeauthenticateStation | |||
| INTEGER as dot11AuthenticateFailStatus | |||
| MacAddress as dot11AuthenticateFailStation | |||
| TruthValue as dot11MultiDomainCapabilityImplemented | |||
| TruthValue as dot11MultiDomainCapabilityEnabled | |||
| OCTET STRING as dot11CountryString | |||
| Dot11AuthenticationAlgorithmsEntry | |||
| SEQUENCE | |||
| Integer32 as dot11AuthenticationAlgorithmsIndex | |||
| INTEGER as dot11AuthenticationAlgorithm | |||
| TruthValue as dot11AuthenticationAlgorithmsEnable | |||
| Dot11WEPDefaultKeysEntry | |||
| SEQUENCE | |||
| INTEGER as dot11WEPDefaultKeyIndex | |||
| WEPKeytype as dot11WEPDefaultKeyValue | |||
| Dot11WEPKeyMappingsEntry | |||
| SEQUENCE | |||
| Integer32 as dot11WEPKeyMappingIndex | |||
| MacAddress as dot11WEPKeyMappingAddress | |||
| TruthValue as dot11WEPKeyMappingWEPOn | |||
| WEPKeytype as dot11WEPKeyMappingValue | |||
| RowStatus as dot11WEPKeyMappingStatus | |||
| Dot11PrivacyEntry | |||
| SEQUENCE | |||
| TruthValue as dot11PrivacyInvoked | |||
| INTEGER as dot11WEPDefaultKeyID | |||
| Unsigned32 as dot11WEPKeyMappingLength | |||
| TruthValue as dot11ExcludeUnencrypted | |||
| Counter32 as dot11WEPICVErrorCount | |||
| Counter32 as dot11WEPExcludedCount | |||
| Dot11MultiDomainCapabilityEntry | |||
| SEQUENCE | |||
| Integer32 as dot11MultiDomainCapabilityIndex | |||
| Integer32 as dot11FirstChannelNumber | |||
| Integer32 as dot11NumberofChannels | |||
| Integer32 as dot11MaximumTransmitPowerLevel | |||
| Dot11OperationEntry | |||
| SEQUENCE | |||
| MacAddress as dot11MACAddress | |||
| INTEGER as dot11RTSThreshold | |||
| INTEGER as dot11ShortRetryLimit | |||
| INTEGER as dot11LongRetryLimit | |||
| INTEGER as dot11FragmentationThreshold | |||
| Unsigned32 as dot11MaxTransmitMSDULifetime | |||
| Unsigned32 as dot11MaxReceiveLifetime | |||
| DisplayString as dot11ManufacturerID | |||
| DisplayString as dot11ProductID | |||
| Dot11CountersEntry | |||
| SEQUENCE | |||
| Counter32 as dot11TransmittedFragmentCount | |||
| Counter32 as dot11MulticastTransmittedFrameCount | |||
| Counter32 as dot11FailedCount | |||
| Counter32 as dot11RetryCount | |||
| Counter32 as dot11MultipleRetryCount | |||
| Counter32 as dot11FrameDuplicateCount | |||
| Counter32 as dot11RTSSuccessCount | |||
| Counter32 as dot11RTSFailureCount | |||
| Counter32 as dot11ACKFailureCount | |||
| Counter32 as dot11ReceivedFragmentCount | |||
| Counter32 as dot11MulticastReceivedFrameCount | |||
| Counter32 as dot11FCSErrorCount | |||
| Counter32 as dot11TransmittedFrameCount | |||
| Counter32 as dot11WEPUndecryptableCount | |||
| Dot11GroupAddressesEntry | |||
| SEQUENCE | |||
| Integer32 as dot11GroupAddressesIndex | |||
| MacAddress as dot11Address | |||
| RowStatus as dot11GroupAddressesStatus | |||
| Dot11ResourceInfoEntry | |||
| SEQUENCE | |||
| OCTET STRING as dot11manufacturerOUI | |||
| DisplayString as dot11manufacturerName | |||
| DisplayString as dot11manufacturerProductName | |||
| DisplayString as dot11manufacturerProductVersion | |||
| Dot11PhyOperationEntry | |||
| SEQUENCE | |||
| INTEGER as dot11PHYType | |||
| Integer32 as dot11CurrentRegDomain | |||
| INTEGER as dot11TempType | |||
| Dot11PhyAntennaEntry | |||
| SEQUENCE | |||
| Integer32 as dot11CurrentTxAntenna | |||
| INTEGER as dot11DiversitySupport | |||
| Integer32 as dot11CurrentRxAntenna | |||
| Dot11PhyTxPowerEntry | |||
| SEQUENCE | |||
| INTEGER as dot11NumberSupportedPowerLevels | |||
| INTEGER as dot11TxPowerLevel1 | |||
| INTEGER as dot11TxPowerLevel2 | |||
| INTEGER as dot11TxPowerLevel3 | |||
| INTEGER as dot11TxPowerLevel4 | |||
| INTEGER as dot11TxPowerLevel5 | |||
| INTEGER as dot11TxPowerLevel6 | |||
| INTEGER as dot11TxPowerLevel7 | |||
| INTEGER as dot11TxPowerLevel8 | |||
| INTEGER as dot11CurrentTxPowerLevel | |||
| Dot11PhyFHSSEntry | |||
| SEQUENCE | |||
| INTEGER as dot11HopTime | |||
| INTEGER as dot11CurrentChannelNumber | |||
| INTEGER as dot11MaxDwellTime | |||
| INTEGER as dot11CurrentDwellTime | |||
| INTEGER as dot11CurrentSet | |||
| INTEGER as dot11CurrentPattern | |||
| INTEGER as dot11CurrentIndex | |||
| Integer32 as dot11EHCCPrimeRadix | |||
| Integer32 as dot11EHCCNumberofChannelsFamilyIndex | |||
| TruthValue as dot11EHCCCapabilityImplemented | |||
| TruthValue as dot11EHCCCapabilityEnabled | |||
| INTEGER as dot11HopAlgorithmAdopted | |||
| TruthValue as dot11RandomTableFlag | |||
| Integer32 as dot11NumberofHoppingSets | |||
| Integer32 as dot11HopModulus | |||
| Integer32 as dot11HopOffset | |||
| Dot11PhyDSSSEntry | |||
| SEQUENCE | |||
| INTEGER as dot11CurrentChannel | |||
| INTEGER as dot11CCAModeSupported | |||
| INTEGER as dot11CurrentCCAMode | |||
| Integer32 as dot11EDThreshold | |||
| Dot11PhyIREntry | |||
| SEQUENCE | |||
| Integer32 as dot11CCAWatchdogTimerMax | |||
| Integer32 as dot11CCAWatchdogCountMax | |||
| Integer32 as dot11CCAWatchdogTimerMin | |||
| Integer32 as dot11CCAWatchdogCountMin | |||
| Dot11RegDomainsSupportedEntry | |||
| SEQUENCE | |||
| Integer32 as dot11RegDomainsSupportedIndex | |||
| INTEGER as dot11RegDomainsSupportedValue | |||
| Dot11AntennasListEntry | |||
| SEQUENCE | |||
| Integer32 as dot11AntennaListIndex | |||
| TruthValue as dot11SupportedTxAntenna | |||
| TruthValue as dot11SupportedRxAntenna | |||
| TruthValue as dot11DiversitySelectionRx | |||
| Dot11SupportedDataRatesTxEntry | |||
| SEQUENCE | |||
| Integer32 as dot11SupportedDataRatesTxIndex | |||
| Integer32 as dot11SupportedDataRatesTxValue | |||
| Dot11SupportedDataRatesRxEntry | |||
| SEQUENCE | |||
| Integer32 as dot11SupportedDataRatesRxIndex | |||
| Integer32 as dot11SupportedDataRatesRxValue | |||
| Dot11PhyOFDMEntry | |||
| SEQUENCE | |||
| INTEGER as dot11CurrentFrequency | |||
| Integer32 as dot11TIThreshold | |||
| INTEGER as dot11FrequencyBandsSupported | |||
| Dot11PhyHRDSSSEntry | |||
| SEQUENCE | |||
| TruthValue as dot11ShortPreambleOptionImplemented | |||
| TruthValue as dot11PBCCOptionImplemented | |||
| TruthValue as dot11ChannelAgilityPresent | |||
| TruthValue as dot11ChannelAgilityEnabled | |||
| INTEGER as dot11HRCCAModeSupported | |||
| Dot11HoppingPatternEntry | |||
| SEQUENCE | |||
| Integer32 as dot11HoppingPatternIndex | |||
| Integer32 as dot11RandomTableFieldNumber | |||