IKE-MON-MIB

File: IKE-MON-MIB.mib (84139 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IPSEC-SA-MON-MIB
ISAKMP-DOI-IND-MON-MIB IPSEC-ISAKMP-IKE-DOI-TC SPRING-TIDE-NETWORKS-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Counter64 Integer32 Unsigned32
Gauge32 OBJECT-IDENTITY experimental
NOTIFICATION-TYPE TruthValue IpsecIpv6Address
IpsecRawId saLocalIpAddress saRemoteIpAddress
saInitiatorCookie saResponderCookie saLocalUdpPort
saRemoteUdpPort IpsecDoiIdentType IkeAuthMethod
IkeEncryptionAlgorithm IkeGroupDescription IkePrf
IkeNotifyMessageType IkeHashAlgorithm IpsecDoiTransformIdent
IkeExchangeType IpsecDoiSecProtocolId stnTmpProtocols

Defined Objects

ikeMonModule 1.3.6.1.4.1.3551.4.1.16
The MIB module to describe IKE phase 1 SAs, security association suites, and entity level objects and events for those types.
MODULE-IDENTITY    

ikeMonMIBObjects 1.3.6.1.4.1.3551.4.1.16.1
This is the base object identifier for all IKE monitoring MIB branches.
OBJECT-IDENTITY    

ikePhase1Objects 1.3.6.1.4.1.3551.4.1.16.1.1
This is the base object identifier for IKE phase 1 objects.
OBJECT-IDENTITY    

ikeTables 1.3.6.1.4.1.3551.4.1.16.1.1.1
This is the base object identifier for the IKE phase 1 security associations table.
OBJECT-IDENTITY    

ikeSaTable 1.3.6.1.4.1.3551.4.1.16.1.1.1.1
The (conceptual) table containing the IKE SAs. The number of rows is the same as the number of IKE phase 2 SAs that are in the process of being negotiated or are negotiated in the entity. Phrased another way, there is a row in this table for each row in 'saTable' for which 'saDoi' is 'ipsecDOI(1)'. The maximum number of rows is implementation dependent.
OBJECT-TYPE    
  SEQUENCE OF  
    IkeSaEntry

ikeSaEntry 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1
An entry (conceptual row) containing the information on a particular IKE SA. There is an entry in this table for each 'saEntry' in which which 'saDoi' is 'ipsecDOI(1)'. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  IkeSaEntry  

saAuthMethod 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.1
The authentication method used to authenticate the peers. Note that this does not include the specific method of extended authentication if extended authentication is used.
OBJECT-TYPE    
  IkeAuthMethod  

saPeerIdType 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.2
The type of ID used by the peer that negotiated this SA.
OBJECT-TYPE    
  IpsecDoiIdentType  

saPeerId 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.3
The ID of the used by the peer that negotiated this SA.
OBJECT-TYPE    
  IpsecRawId  

saPeerCertSerialNum 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.4
The serial number of the certificate of the peer this SA was negotiated with. This object has no meaning if a certificate was not used in authenticating the peer.
OBJECT-TYPE    
  OCTET STRING SIZE(0..63)  

saPeerCertIssuer 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.5
The issuer name of the certificate of the peer this control channel was negotiated with. This object has no meaning if a certificate was not used in authenticating the peer.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

saLocalIdType 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.6
The type of ID used by the local entity that negotiated this SA.
OBJECT-TYPE    
  IpsecDoiIdentType  

saLocalId 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.7
The ID of the used by the local entity that negotiated this SA.
OBJECT-TYPE    
  IpsecRawId  

saEncAlg 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.8
The encryption algorithm used to protect this SA.
OBJECT-TYPE    
  IkeEncryptionAlgorithm  

saEncKeyLength 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.9
The length of the encryption key in bits used for the algorithm specified in the 'saEncAlg' object. It may be 0 if the key length is implicit in the specified algorithm.
OBJECT-TYPE    
  Unsigned32 0..65531  

saHashAlg 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.10
The hash algorithm used to protect this SA.
OBJECT-TYPE    
  IkeHashAlgorithm  

saHashKeyLength 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.11
The length of the encryption key in bits used for the algorithm specified in the 'saHashAlg' object. It may be 0 if the key length is implicit in the specified algorithm.
OBJECT-TYPE    
  Unsigned32 0..65531  

saPRF 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.12
The pseudo-random function used by this SA, or 0 if the HMAC version of the negotiated hash algorithm is used as a pseudo-random function.
OBJECT-TYPE    
  IkePrf  

saOakleyGroupDesc 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.13
The group number used to generate the Diffie-Hellman key pair when setting up the SA, or 0 if none of the defined groups was used. If this value is 0, the 'saOakleyGroup' must not also be OBJECT IDENTIFIER { 0 0 }.
OBJECT-TYPE    
  IkeGroupDescription  

saOakleyGroup 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.14
The object identifier of the Oakley group row that was used if a well-known group was not used to generate the Diffie- Hellman key pair for this SA. If a well-known group was used, the value should be set to the OBJECT IDENTIFIER { 0 0 }. For example, if the group is a MODP group, the value of this object is the object identifier of 'modpGroupIndex' of the appropriate row ('modpGroupEntry') in 'modpGroupTable'.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

saLimitSeconds 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.15
The maximum number of seconds the SA is allowed to exist, or 0 if there is no time-based limit on the existence of the SA. The display value is limited to 4,294,967,295 seconds (more than 136 years); values greater than that value will be truncated.
OBJECT-TYPE    
  Unsigned32  

saLimitKbytes 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.16
The maximum number of kilobytes the SA is allowed to encrypt before it expires, or 0 if there is no traffic-by- byte-based limit on the existence of the SA. The display value is limited to 4,294,967,295 kilobytes (more than 4,194,304 Mbyte ); values greater than that value will be truncated.
OBJECT-TYPE    
  Unsigned32  

saLimitKeyUses 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.17
The maximum number of times the SA is allowed to provide keying material from its own Diffie-Hellman exchange before it expires, or 0 if there is no keying material-based limit on the existence of the SA.
OBJECT-TYPE    
  Unsigned32  

saAccKbytes 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.18
The number of kilobytes the SA has encrypted that count against any lifetime restriction based on traffic. This value may be 0 if there is no such restriction.
OBJECT-TYPE    
  Counter32  

saKeyUses 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.19
The number of times the SA is has provided keying material derived from its own original Diffie-Hellman exchange.
OBJECT-TYPE    
  Counter32  

saCreatedSuites 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.20
The total number of SA suites that this SA has successfully created. In other words, the total number of successful quick mode exchanges multiplied by the number of SA payloads in each of those exchanges.
OBJECT-TYPE    
  Counter32  

saDeletedSuites 1.3.6.1.4.1.3551.4.1.16.1.1.1.1.1.21
The total number of SA suites that this SA has sent or received SA suite delete notifications for. When delete notifications are sent or received for more than one SA in an SA suite, this number shall be decremented by one, and not by the number SAs in the suite that were deleted.
OBJECT-TYPE    
  Counter32  

saByCreatorsTable 1.3.6.1.4.1.3551.4.1.16.1.1.1.2
The (conceptual) table that sorts the IKE phase 1 SAs by the endpoint identifiers. The number of rows in this table is the same as the number of IKE phase 1 SAs in the entity.
OBJECT-TYPE    
  SEQUENCE OF  
    SaByCreatorsEntry

saByCreatorsEntry 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1
An entry (conceptual row) referencing a particular IKE phase 1 SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  SaByCreatorsEntry  

saByCreatorsLocalIdType 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.1
The type of ID used by the local entity that negotiated this SA.
OBJECT-TYPE    
  IpsecDoiIdentType  

saByCreatorsLocalId 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.2
The ID of the used by the local entity that negotiated this SA.
OBJECT-TYPE    
  IpsecRawId  

saByCreatorsPeerIdType 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.3
The type of ID used by the remote entity that negotiated this SA.
OBJECT-TYPE    
  IpsecDoiIdentType  

saByCreatorsPeerId 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.4
The ID of the used by the remote entity that negotiated this SA.
OBJECT-TYPE    
  IpsecRawId  

saByCreatorsIndex 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.5
A unique value, greater than zero, for each IKE phase 1 SA that exists between the two endpoints. It is recommended that values are assigned contiguously starting from 1.
OBJECT-TYPE    
  Unsigned32 1..16777215  

saIkeLocalIpAddress 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.6
The 'saLocalIpAddress' of the phase 1 SA for this row.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

saIkeRemoteIpAddress 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.7
The 'saRemoteIpAddress' of the phase 1 SA for this row.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

saIkeInitiatorCookie 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.8
The 'saInitiatorCookie' of the phase 1 SA for this row.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

saIkeResponderCookie 1.3.6.1.4.1.3551.4.1.16.1.1.1.2.1.9
The 'saResponderCookie' of the phase 1 SA for this row.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

exchangeTable 1.3.6.1.4.1.3551.4.1.16.1.1.1.3
The (conceptual) table containing the exchanges used. There should be one row for every exchange attempt that has occurred using a phase 1 security association that exists in the entity. The maximum number of rows is implementation dependent.
OBJECT-TYPE    
  SEQUENCE OF  
    ExchangeEntry

exchangeEntry 1.3.6.1.4.1.3551.4.1.16.1.1.1.3.1
An entry (conceptual row) containing the information on a particular exchange used in an SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  ExchangeEntry  

exchangeType 1.3.6.1.4.1.3551.4.1.16.1.1.1.3.1.1
The type of the exchange for which the statistics of this row apply.
OBJECT-TYPE    
  IkeExchangeType  

exchangeTotalCount 1.3.6.1.4.1.3551.4.1.16.1.1.1.3.1.2
The total number of complete exchanges of the type performed using the SA, as either initiator or as responder. If there were failed attempts to initiate exchanges, this value is not equal to the sum of 'exchangeInitiatedCount' and 'exchangeRespondedCount'.
OBJECT-TYPE    
  Counter32  

exchangeInitiatedCount 1.3.6.1.4.1.3551.4.1.16.1.1.1.3.1.3
The total number of exchanges of the type attempted using the SA as initiator. This includes exchange that failed or were incomplete
OBJECT-TYPE    
  Counter32  

exchangeRespondedCount 1.3.6.1.4.1.3551.4.1.16.1.1.1.3.1.4
The total number of complete exchanges of the type performed using the SA as responder.
OBJECT-TYPE    
  Counter32  

ikeGlobals 1.3.6.1.4.1.3551.4.1.16.1.1.2
This is the base object identifier for all objects which are global values for IKE.
OBJECT-IDENTITY    

ikeCurrentSAs 1.3.6.1.4.1.3551.4.1.16.1.1.2.1
The current number of IKE SAs in the entity.
OBJECT-TYPE    
  Gauge32  

ikeCurrentInitiatedSAs 1.3.6.1.4.1.3551.4.1.16.1.1.2.2
The current number of IKE SAs successfully negotiated in the entity that were initiated by the entity.
OBJECT-TYPE    
  Gauge32  

ikeCurrentRespondedSAs 1.3.6.1.4.1.3551.4.1.16.1.1.2.3
The current number of IKE SAs successfully negotiated in the entity that were initiated by the peer entity.
OBJECT-TYPE    
  Gauge32  

ikeTotalSAs 1.3.6.1.4.1.3551.4.1.16.1.1.2.4
The total number of IKE SAs successfully negotiated in the entity since boot time.
OBJECT-TYPE    
  Counter32  

ikeTotalInitiatedSAs 1.3.6.1.4.1.3551.4.1.16.1.1.2.5
The total number of IKE SAs successfully negotiated in the entity since boot time that were initiated by the entity.
OBJECT-TYPE    
  Counter32  

ikeTotalRespondedSAs 1.3.6.1.4.1.3551.4.1.16.1.1.2.6
The total number of IKE SAs successfully negotiated in the entity since boot time that were initiated by the peer entity.
OBJECT-TYPE    
  Counter32  

ikeTotalAttempts 1.3.6.1.4.1.3551.4.1.16.1.1.2.7
The total number of IKE SAs negotiation attempts made since boot time. This includes successful negotiations.
OBJECT-TYPE    
  Counter32  

ikeTotalSaInitAttempts 1.3.6.1.4.1.3551.4.1.16.1.1.2.8
The total number of IKE SAs negotiation attempts made where the entity was the initiator since boot time. This includes successful negotiations.
OBJECT-TYPE    
  Counter32  

ikeTotalSaRespAttempts 1.3.6.1.4.1.3551.4.1.16.1.1.2.9
The total number of IKE SAs negotiation attempts made where the entity was the responder since boot time. This includes successful negotiations.
OBJECT-TYPE    
  Counter32  

ikeTrafStats 1.3.6.1.4.1.3551.4.1.16.1.1.3
This is the base object identifier for all objects which are global values for IKE.
OBJECT-IDENTITY    

ikeTotalInPackets 1.3.6.1.4.1.3551.4.1.16.1.1.3.1
The total number of IKE packets received by the entity since boot time, including re-transmissions and un-encrypted packets.
OBJECT-TYPE    
  Counter32  

ikeTotalOutPackets 1.3.6.1.4.1.3551.4.1.16.1.1.3.2
The total number of IKE packets sent by the entity since boot time, including re-transmissions and un-encrypted packets.
OBJECT-TYPE    
  Counter32  

ikeTotalInOctets 1.3.6.1.4.1.3551.4.1.16.1.1.3.3
The total amount of IKE traffic received by the entity since boot time, measured in bytes, including any re- transmitted packets received, and including encrypted and un-encrypted packets.
OBJECT-TYPE    
  Counter64  

ikeTotalOutOctets 1.3.6.1.4.1.3551.4.1.16.1.1.3.4
The total amount of IKE traffic sent by the entity since boot time, measured in bytes, including any re-transmissions and including encrypted and un-encrypted packets.
OBJECT-TYPE    
  Counter64  

ikeErrors 1.3.6.1.4.1.3551.4.1.16.1.1.4
This is the base object identifier for all objects which are global values for IKE.
OBJECT-IDENTITY    

ikeTotalInitFailures 1.3.6.1.4.1.3551.4.1.16.1.1.4.1
The total number of attempts to initiate an IKE phase 1 SA that failed since boot time, when there was a response from the peer entity. This value may be used to detect clogging or denial-of- service attacks.
OBJECT-TYPE    
  Counter32  

ikeTotalInitNoResponses 1.3.6.1.4.1.3551.4.1.16.1.1.4.2
The total number of attempts to initiate an IKE phase 1 SA that failed since boot time, when there was no response from the peer entity. This should only be incremented if the peer does not repond to the first packet of attempted negotiations.
OBJECT-TYPE    
  Counter32  

ikeTotalRespFailures 1.3.6.1.4.1.3551.4.1.16.1.1.4.3
The total number of attempts to initiate an IKE phase 1 SA that failed since boot time, when the initiation attempt came for the peer entity.
OBJECT-TYPE    
  Counter32  

ikeTrapControl 1.3.6.1.4.1.3551.4.1.16.1.1.5
This is the base object identifier for all trap controls for the IKE phase 1 SA portion of this MIB.
OBJECT-IDENTITY    

ikeNegFailureTrapEnable 1.3.6.1.4.1.3551.4.1.16.1.1.5.1
Indicates whether ikeNegFailure traps should be generated.
OBJECT-TYPE    
  TruthValue  

ikeTraps 1.3.6.1.4.1.3551.4.1.16.1.1.6
This is the base object identifier for all traps for the IKE phase 1 SA portion of this MIB.
OBJECT-IDENTITY    

ikeNegFailure 1.3.6.1.4.1.3551.4.1.16.1.1.6.1
An attempt to negotiate a phase 1 IKE SA failed. The notification type sent or received is also sent as part of the trap, along with the current value of the total negotiation error counters for ISAKMP.
NOTIFICATION-TYPE    
  saLocalIdType  
  saLocalId  
  saPeerIdType  
  saPeerId  
  saLocalIpAddress  
  saLocalUdpPort  
  saRemoteIpAddress  
  saRemoteUdpPort  
  saAuthMethod  
  saPeerCertSerialNum  
  saPeerCertIssuer  
  ikeTotalInitFailures  
  ikeTotalInitNoResponses  
  ikeTotalRespFailures  
  notifyType  

ikeNotifications 1.3.6.1.4.1.3551.4.1.16.1.1.7
This is the base object identifier for all notification objects of this MIB.
OBJECT-IDENTITY    

notifyCountTable 1.3.6.1.4.1.3551.4.1.16.1.1.7.1
The (conceptual) table containing information on IPSec notify message counts. Rows are created in this table for every notification type that has been sent or received by the entity. This table MAY be sparsely populated; that is, rows for which the count is 0 may be absent.
OBJECT-TYPE    
  SEQUENCE OF  
    NotifyCountEntry

notifyCountEntry 1.3.6.1.4.1.3551.4.1.16.1.1.7.1.1
An entry (conceptual row) containing the total number of occurrences of a notify message. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  NotifyCountEntry  

notifyProtocol 1.3.6.1.4.1.3551.4.1.16.1.1.7.1.1.1
The value representing a protocol for which the notify was used.
OBJECT-TYPE    
  IpsecDoiSecProtocolId  

notifyType 1.3.6.1.4.1.3551.4.1.16.1.1.7.1.1.2
The value representing a specific ISAKMP notify message, or 0 if unknown. Values are assigned from the set of notify message types as defined in Section 3.14.1 of [ISAKMP], and enhanced by the IPsec DOI. In addition, the value 0 may be used for this object when the object is used as a trap cause, and the cause is unknown.
OBJECT-TYPE    
  IkeNotifyMessageType  

notifySentCount 1.3.6.1.4.1.3551.4.1.16.1.1.7.1.1.3
The total number of times the specific notify message has been sent by the entity since system boot.
OBJECT-TYPE    
  Counter32  

notifyReceivedCount 1.3.6.1.4.1.3551.4.1.16.1.1.7.1.1.4
The total number of times the specific notify message has been received by the entity since system boot.
OBJECT-TYPE    
  Counter32  

phase2Objects 1.3.6.1.4.1.3551.4.1.16.1.2
This is the base object identifier for IKE phase 2 objects, including the suite and phase 2 SA tables.
OBJECT-IDENTITY    

suiteTables 1.3.6.1.4.1.3551.4.1.16.1.2.1
This is the base object identifier for the suite table.
OBJECT-IDENTITY    

suiteTable 1.3.6.1.4.1.3551.4.1.16.1.2.1.1
The (conceptual) table containing the phase 2 suites. The number of rows in this table is the same as the number of suites in the entity. The maximum number of rows is implementation dependent.
OBJECT-TYPE    
  SEQUENCE OF  
    SuiteEntry

suiteEntry 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1
An entry (conceptual row) containing the information on a particular phase 2 SA suite. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  SuiteEntry  

suiteIndex 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.1
A unique value, greater than zero, for each SA suite. It is recommended that values are assigned contiguously starting from 1.
OBJECT-TYPE    
  Unsigned32 1..16777215  

suiteLocalAddress 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.2
The address used by the local entity that negotiated the SA suite. IPv4 entities will prefix the IP address with '0000:0000:0000:0000:0000:FFFF::'.
OBJECT-TYPE    
  IpsecIpv6Address  

suiteRemoteAddress 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.3
The address used by the remote entity that negotiated the SA suite. IPv4 entities will prefix the IP address with '0000:0000:0000:0000:0000:FFFF::'.
OBJECT-TYPE    
  IpsecIpv6Address  

suitePhase1RemoteIdType 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.4
The type of ID used by the remote entity that negotiated this suite.
OBJECT-TYPE    
  IpsecDoiIdentType  

suitePhase1RemoteId 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.5
The ID of the remote entity that negotiated this suite.
OBJECT-TYPE    
  IpsecRawId  

suitePhase1LocalIdType 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.6
The type of ID used by the local entity that negotiated this suite.
OBJECT-TYPE    
  IpsecDoiIdentType  

suitePhase1LocalId 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.7
The ID of the local entity that negotiated this suite.
OBJECT-TYPE    
  IpsecRawId  

suiteRemoteId 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.8
The remote identifier of the SAs in the suite. It may be 0 if unknown or if the suite uses transport mode encapsulation. This corresponds to the destination identifier of outbound SAs in the suite, and to the source identifier of inbound SAs in the suite. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  IpsecRawId  

suiteRemoteIdType 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.9
The type of ID used for 'suiteRemoteId'. It may be 0 if unknown or if the suite uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  IpsecDoiIdentType  

suiteLocalId 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.10
The local identifier of the SAs in the suite. It may be 0 if unknown or if the suite uses transport mode encapsulation. This corresponds to the source identifier of outbound SAs in the suite, and to the destination identifier of inbound SAs in the suite. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  IpsecRawId  

suiteLocalIdType 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.11
The type of ID used for 'suiteLocalId'. It may be 0 if unknown or if the suite uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  IpsecDoiIdentType  

suiteProtocol 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.12
The transport-layer protocol number that this suite carries, or 0 if it carries any protocol. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  Integer32 0..255  

suiteRemotePort 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.13
The remote port number of the protocol that this suite carries, or 0 if it carries any port number. This corresponds to the destination port number of outbound SAs in the suite, and to the source port number of inbound SAs in the suite. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  Integer32 0..65535  

suiteLocalPort 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.14
The local port number of the protocol that this SA carries, or 0 if it carries any port number. This corresponds to the source port number of outbound SAs in the suite, and to the destination port number of inbound SAs in the suite. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations
OBJECT-TYPE    
  Integer32 0..65535  

suiteOakleyGroupDesc 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.15
The group number used to generate the Diffie-Hellman key pair when setting up the SA, or 0 if none of the well known groups was used, or if perfect forward secrecy was not used.
OBJECT-TYPE    
  IkeGroupDescription  

suiteOakleyGroup 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.16
The table index value of the Oakley group row that was used if a well-known group was not used to generate the Diffie- Hellman key pair for this SA. If a well-known group was used, or if perfect forward secrecy was not used, the value should be set to the OBJECT IDENTIFIER { 0 0 }.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

suiteLifeSeconds 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.17
The number of seconds that the SA has existed.
OBJECT-TYPE    
  Counter32  

suiteInUserOctets 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.18
The amount of user level traffic measured in bytes handled by the suite in the inbound direction. This is the same as the user level traffic of the inner most inbound SA in the suite. Note that if the inner-most SA is a shared IPcomp SA, then this value may be difficult to calculate.
OBJECT-TYPE    
  Counter64  

suiteInPackets 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.19
The number of inbound packets handled by the suite. This is the same as the number of packets handled by any one of the inbound SAs in the suite.
OBJECT-TYPE    
  Counter64  

suiteOutUserOctets 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.20
The amount of user level traffic measured in bytes handled by the suite in the outbound direction. This is the same as the user level traffic of the inner most outbound SA in the suite. Note that if the inner most SA is a shared IPcomp SA, then this value may be difficult to calculate.
OBJECT-TYPE    
  Counter64  

suiteOutPackets 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.21
The number of outbound packets handled by the suite. This is the same as the number of packets handled by any one of the outbound SAs in the suite.
OBJECT-TYPE    
  Counter64  

suiteSendErrors 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.22
The number of outbound packets discarded by the suite due to any error. This is the same as the sum of all errors of all outbound SAs in the suite.
OBJECT-TYPE    
  Counter32  

suiteReceiveErrors 1.3.6.1.4.1.3551.4.1.16.1.2.1.1.1.23
The number of inbound packets discarded by the suite due to any error. This is the same as the sum of all errors of all inbound SAs in the suite.
OBJECT-TYPE    
  Counter32  

phase2SaTable 1.3.6.1.4.1.3551.4.1.16.1.2.1.2
The (conceptual) table containing ID information for the phase 2 SAs that are part of suites. The number of rows in this table is the same as the number of unidirectional phase 2 IPsec SA pairs that are created as part of suites. The maximum number of rows is implementation dependent.
OBJECT-TYPE    
  SEQUENCE OF  
    Phase2SaEntry

phase2SaEntry 1.3.6.1.4.1.3551.4.1.16.1.2.1.2.1
An entry (conceptual row) containing the information on a particular phase 2 SA within a suite. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  Phase2SaEntry  

saOrder 1.3.6.1.4.1.3551.4.1.16.1.2.1.2.1.1
The position within the suite of the pair of SAs indicated by this row. A value of 1 is used to represent the outer-most SA pair. The outer-most SA of any given packet has its header next to the outer IP header of the processed packet, while the inner-most SA has its header nearest the data of the unprocessed packet. (Note that the IPcomp header may be missing in actual usage if a particular packet was not compressed.) This value should be monotonically increasing for every SA pair in a suite. The maximum value is implementation dependent, but will generally not exceed three.
OBJECT-TYPE    
  Unsigned32 1..15  

saProtocol 1.3.6.1.4.1.3551.4.1.16.1.2.1.2.1.2
The protocol of the inbound/outbound SA pair indicated by this row of the table.
OBJECT-TYPE    
  IpsecDoiTransformIdent  

saInSpi 1.3.6.1.4.1.3551.4.1.16.1.2.1.2.1.3
The security parameters index of the inbound SA of the inbound/outbound SA pair. If the protocol of the SA pair is IPcomp, this value is the CPI. This value is used with the value of 'suiteLocalAddress' from the row indexed by 'suiteIndex' to create a SPI/address pair that uniquely identifies the inbound SA used in this SA suite. This can then be used to look up the SA in the appropriate inbound SA table, based on 'saProtocol'.
OBJECT-TYPE    
  Unsigned32  

saOutSpi 1.3.6.1.4.1.3551.4.1.16.1.2.1.2.1.4
The security parameters index of the outbound SA of the inbound/outbound SA pair. If the protocol of the SA pair is IPcomp, this value is the CPI. This value is used with the value of 'suiteLocalAddress' from the row indexed by 'suiteIndex' to create a SPI/address pair that uniquely identifies the outbound SA used in this SA suite. This can then be used to look up the SA in the appropriate outbound SA table, based on 'saProtocol'.
OBJECT-TYPE    
  Unsigned32  

suiteByCreatorsTable 1.3.6.1.4.1.3551.4.1.16.1.2.1.3
The (conceptual) table that sorts the SA suites by the endpoint identifiers. The number of rows in this table is the same as the number of suites in the entity.
OBJECT-TYPE    
  SEQUENCE OF  
    SuiteByCreatorsEntry

suiteByCreatorsEntry 1.3.6.1.4.1.3551.4.1.16.1.2.1.3.1
An entry (conceptual row) referencing a particular suite. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  SuiteByCreatorsEntry  

suiteByCreatorsP1LocalIdType 1.3.6.1.4.1.3551.4.1.16.1.2.1.3.1.1
The type of ID used by the local entity that negotiated this suite.
OBJECT-TYPE    
  IpsecDoiIdentType  

suiteByCreatorsP1LocalId 1.3.6.1.4.1.3551.4.1.16.1.2.1.3.1.2
The ID of the local entity that negotiated this suite.
OBJECT-TYPE    
  IpsecRawId  

suiteByCreatorsP1RemoteIdType 1.3.6.1.4.1.3551.4.1.16.1.2.1.3.1.3
The type of ID used by the remote entity that negotiated this suite.
OBJECT-TYPE    
  IpsecDoiIdentType  

suiteByCreatorsP1RemoteId 1.3.6.1.4.1.3551.4.1.16.1.2.1.3.1.4
The ID of the remote entity that negotiated this suite.
OBJECT-TYPE    
  IpsecRawId  

suiteByCreatorsIndex 1.3.6.1.4.1.3551.4.1.16.1.2.1.3.1.5
A unique value, greater than zero, for each SA suite that is between the two endpoints. It is recommended that values are assigned contiguously starting from 1 for each SA suite between the two endpoints.
OBJECT-TYPE    
  Unsigned32 1..16777215  

suiteByCreatorsRef 1.3.6.1.4.1.3551.4.1.16.1.2.1.3.1.6
The value of 'suiteIndex' in the row ('suiteEntry') of the 'suiteTable' to which this row refers.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

suiteBySelectorsTable 1.3.6.1.4.1.3551.4.1.16.1.2.1.4
The (conceptual) table that sorts the suites by the selectors. The number of rows in this table is the same as the number of suites in the entity.
OBJECT-TYPE    
  SEQUENCE OF  
    SuiteBySelectorsEntry

suiteBySelectorsEntry 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1
An entry (conceptual row) referencing a particular suite. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  SuiteBySelectorsEntry  

suiteBySelectorsLocalId 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.1
The local identifier of the selector of the suite. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  IpsecRawId  

suiteBySelectorsLocalIdType 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.2
The type of ID used for 'suiteBySelectorsLocalId'. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  IpsecDoiIdentType  

suiteBySelectorsRemoteId 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.3
The remote identifier of the selector of the suite. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  IpsecRawId  

suiteBySelectorsRemoteIdType 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.4
The type of ID used for 'suiteBySelectorsRemoteId'. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  IpsecDoiIdentType  

suiteBySelectorsProtocol 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.5
The transport-layer protocol number that this suite carries, or 0 if it carries any protocol. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  Integer32 0..255  

suiteBySelectorsLocalPort 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.6
The local port number of the protocol that this suite carries, or 0 if it carries any port number. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations.
OBJECT-TYPE    
  Integer32 0..65535  

suiteBySelectorsRemotePort 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.7
The remote port number of the protocol that this SA carries, or 0 if it carries any port number. This value is taken directly from the optional ID payloads that are exchanged during phase 2 negotiations
OBJECT-TYPE    
  Integer32 0..65535  

suiteBySelectorsIndex 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.8
A unique value, greater than zero, for each SA suite that the same selectors. It is recommended that values are assigned contiguously starting from 1.
OBJECT-TYPE    
  Unsigned32 1..16777215  

suiteBySelectorsRef 1.3.6.1.4.1.3551.4.1.16.1.2.1.4.1.9
The value of 'suiteIndex' in the row ('suiteEntry') of the 'suiteTable' to which this row refers.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ipsecSaInSuiteTable 1.3.6.1.4.1.3551.4.1.16.1.2.1.5
The (conceptual) table that allows determination of which suite a particular phase 2 SA is in. The number of rows in this table is the same as the number of phase 2 SAs in the entity.
OBJECT-TYPE    
  SEQUENCE OF  
    IpsecSaInSuiteEntry

ipsecSaInSuiteEntry 1.3.6.1.4.1.3551.4.1.16.1.2.1.5.1
An entry (conceptual row) referencing a particular phase 2 SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  IpsecSaInSuiteEntry  

ipsecSaInSuiteDestAddress 1.3.6.1.4.1.3551.4.1.16.1.2.1.5.1.1
The destination address of the IPsec phase 2 SA to which this row refers.
OBJECT-TYPE    
  IpsecIpv6Address  

ipsecSaInSuiteProtocol 1.3.6.1.4.1.3551.4.1.16.1.2.1.5.1.2
The security protocol of the IPsec phase 2 SA to which this row refers.
OBJECT-TYPE    
  IpsecDoiSecProtocolId  

ipsecSaInSuiteSpi 1.3.6.1.4.1.3551.4.1.16.1.2.1.5.1.3
The SPI value of the IPsec phase 2 SA to which this row refers. If the value of 'ipsecSaInSuiteProtocol' is 'protoIpcomp(4)', then this is the CPI of the SA.
OBJECT-TYPE    
  Unsigned32  

ipsecSaInSuiteRef 1.3.6.1.4.1.3551.4.1.16.1.2.1.5.1.4
The value of 'suiteIndex' in the row ('suiteEntry') of the 'suiteTable' to which this row refers. This is the suite that uses this SA.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

suiteGlobals 1.3.6.1.4.1.3551.4.1.16.1.2.2
This is the base object identifier for all objects which are global values for suites.
OBJECT-IDENTITY    

totalSuites 1.3.6.1.4.1.3551.4.1.16.1.2.2.1
The total number of suites created by the entity since system boot.
OBJECT-TYPE    
  Counter32  

currentSuites 1.3.6.1.4.1.3551.4.1.16.1.2.2.2
The total number of suites currently in existence in the entity.
OBJECT-TYPE    
  Gauge32  

suiteTrafStats 1.3.6.1.4.1.3551.4.1.16.1.2.3
This is the base object identifier for all objects which are global counters for suite traffic statistics.
OBJECT-IDENTITY    

suiteTotalInUserKbytes 1.3.6.1.4.1.3551.4.1.16.1.2.3.1
The total amount of user level traffic carried by all suites in the entity since boot time, measured in kilobytes, in the inbound direction. This is the sum of the 'suiteInUserOctets' column for all suite rows created since boot time.
OBJECT-TYPE    
  Counter64  

suiteTotalInPackets 1.3.6.1.4.1.3551.4.1.16.1.2.3.2
The total number of packets carried by all suites in the entity since boot time in the inbound direction. This is the sum of the 'suiteInPackets' column for all suite rows created since boot time.
OBJECT-TYPE    
  Counter64  

suiteTotalOutUserKbytes 1.3.6.1.4.1.3551.4.1.16.1.2.3.3
The total amount of user level traffic carried by all suites in the entity since boot time, measured in kilobytes, in the outbound direction. This is the sum of the 'suiteOutUserOctets' column for all suite rows created since boot time.
OBJECT-TYPE    
  Counter64  

suiteTotalOutPackets 1.3.6.1.4.1.3551.4.1.16.1.2.3.4
The total number of packets carried by all suites in the entity since boot time, in the outbound direction. This is the sum of the 'suiteOutPackets' column for all suite rows created since boot time.
OBJECT-TYPE    
  Counter64  

suiteErrors 1.3.6.1.4.1.3551.4.1.16.1.2.4
This is the base object identifier for all objects which are global error counters for suites.
OBJECT-IDENTITY    

suiteInitFailures 1.3.6.1.4.1.3551.4.1.16.1.2.4.1
The total number of attempts to initiate an suite that failed since boot time, when the attempt was initiated locally.
OBJECT-TYPE    
  Counter32  

suiteRespondFailures 1.3.6.1.4.1.3551.4.1.16.1.2.4.2
The total number of attempts to initiate an suite that failed since boot time, when the attempt was initiated by the peer entity.
OBJECT-TYPE    
  Counter32  

suiteTrapControl 1.3.6.1.4.1.3551.4.1.16.1.2.5
This is the base object identifier for all trap controls for the suite portion of this MIB.
OBJECT-IDENTITY    

suiteNegFailureTrapEnable 1.3.6.1.4.1.3551.4.1.16.1.2.5.1
Indicates whether 'suiteNegFailure' traps should be generated.
OBJECT-TYPE    
  TruthValue  

suiteTraps 1.3.6.1.4.1.3551.4.1.16.1.2.6
This is the base object identifier for all traps for the suite portion of this MIB.
OBJECT-IDENTITY    

suiteNegFailure 1.3.6.1.4.1.3551.4.1.16.1.2.6.1
An attempt to negotiate a phase 2 SA suite for the specified selectors failed. The current total failure counts are passed as well as the notification type sent or received as part of the failure.
NOTIFICATION-TYPE    
  suiteRemoteId  
  suiteRemoteIdType  
  suiteLocalId  
  suiteLocalIdType  
  suiteProtocol  
  suiteRemotePort  
  suiteLocalPort  
  suiteInitFailures  
  suiteRespondFailures  
  notifyType  

oakleyObjects 1.3.6.1.4.1.3551.4.1.16.1.3
This is the base object identifier for Oakley groups.
OBJECT-IDENTITY    

modpGroupTable 1.3.6.1.4.1.3551.4.1.16.1.3.1
The (conceptual) table containing Oakley MODP groups that are not well known that the entity has negotiated or knows about. There should be one row for every Oakley MODP group negotiated or supported by the entity that is not a well- known group. The maximum number of rows is implementation dependent.
OBJECT-TYPE    
  SEQUENCE OF  
    ModpGroupEntry

modpGroupEntry 1.3.6.1.4.1.3551.4.1.16.1.3.1.1
An entry (conceptual row) containing the information on a particular Oakley MODP group. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  ModpGroupEntry  

modpGroupIndex 1.3.6.1.4.1.3551.4.1.16.1.3.1.1.1
A unique value, greater than zero, for each Oakley MODP group. It is recommended that values are assigned contiguously starting from 1. The value for each MODP group must remain constant at least from one re-initialization of entity's network management system to the next re-initialization.
OBJECT-TYPE    
  Unsigned32 1..16777215  

modpFieldSize 1.3.6.1.4.1.3551.4.1.16.1.3.1.1.2
The size of a field element, in bits.
OBJECT-TYPE    
  Unsigned32  

modpPrime 1.3.6.1.4.1.3551.4.1.16.1.3.1.1.3
The prime of the MODP group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

modpGenerator 1.3.6.1.4.1.3551.4.1.16.1.3.1.1.4
The generator value of the MODP group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

modpLPF 1.3.6.1.4.1.3551.4.1.16.1.3.1.1.5
The largest prime factor of the group size, or 0 if unspecified.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

modpStrength 1.3.6.1.4.1.3551.4.1.16.1.3.1.1.6
The strength of the group, which is approximately the number of key-bits protected, or 0 if unspecified.
OBJECT-TYPE    
  Unsigned32  

ecpGroupTable 1.3.6.1.4.1.3551.4.1.16.1.3.2
The (conceptual) table containing Oakley ECP groups that are not well known that the entity has negotiated or knows about. There should be one row for every Oakley ECP group negotiated or supported by the entity that is not a well- known group. The maximum number of rows is implementation dependent.
OBJECT-TYPE    
  SEQUENCE OF  
    EcpGroupEntry

ecpGroupEntry 1.3.6.1.4.1.3551.4.1.16.1.3.2.1
An entry (conceptual row) containing the information on a particular Oakley ECP group. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  EcpGroupEntry  

ecpGroupIndex 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.1
A unique value, greater than zero, for each Oakley ECP group. It is recommended that values are assigned contiguously starting from 1. The value for each ECP group must remain constant at least from one re-initialization of entity's network management system to the next re-initialization.
OBJECT-TYPE    
  Unsigned32 1..16777215  

ecpFieldSize 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.2
The size of a field element, in bits.
OBJECT-TYPE    
  Unsigned32  

ecpPrime 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.3
The prime of the ECP group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ecpGeneratorOne 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.4
The first generator value of the group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ecpGeneratorTwo 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.5
The second generator value of the group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ecpParameterOne 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.6
The first elliptic curve parameter value of the group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ecpParameterTwo 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.7
The second elliptic curve parameter value of the group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ecpLPF 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.8
The largest prime factor of the group size, or 0 if unspecified.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ecpOrder 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.9
The order of the group, or 0 if it is unspecified.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ecpStrength 1.3.6.1.4.1.3551.4.1.16.1.3.2.1.10
The strength of the group, which is approximately the number of key-bits protected.
OBJECT-TYPE    
  Unsigned32  

ec2nGroupTable 1.3.6.1.4.1.3551.4.1.16.1.3.3
The (conceptual) table containing Oakley EC2N groups that are not well known that the entity has negotiated or knows about. There should be one row for every Oakley group negotiated or supported by the entity that is not a well-known group. The maximum number of rows is implementation dependent.
OBJECT-TYPE    
  SEQUENCE OF  
    Ec2nGroupEntry

ec2nGroupEntry 1.3.6.1.4.1.3551.4.1.16.1.3.3.1
An entry (conceptual row) containing the information on a particular Oakley EC2N group. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
OBJECT-TYPE    
  Ec2nGroupEntry  

ec2nGroupIndex 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.1
A unique value, greater than zero, for each Oakley EC2N group. It is recommended that values are assigned contiguously starting from 1. The value for each EC2N group must remain constant at least from one re-initialization of entity's network management system to the next re-initialization.
OBJECT-TYPE    
  Unsigned32 1..16777215  

ec2nDegree 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.2
The degree of the irreducible polynomial.
OBJECT-TYPE    
  Unsigned32  

ec2nIrrPoly 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.3
The prime or the irreducible field polynomial.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ec2nGeneratorOne 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.4
The first generator value of the group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ec2nGeneratorTwo 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.5
The second generator value of the group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ec2nParameterOne 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.6
The first elliptic curve parameter value of the group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ec2nParameterTwo 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.7
The second elliptic curve parameter value of the group.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ec2nLPF 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.8
The largest prime factor of the group size, or 0 if unspecified.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ec2nOrder 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.9
The order of the group, or 0 if it is unspecified.
OBJECT-TYPE    
  OCTET STRING SIZE(0..511)  

ec2nStrength 1.3.6.1.4.1.3551.4.1.16.1.3.3.1.10
The strength of the group, which is approximately the number of key-bits protected, or 0 if it is unspecified.
OBJECT-TYPE    
  Unsigned32  

ikeGroups 1.3.6.1.4.1.3551.4.1.16.1.4
This is the base object identifier for all objects which describe the groups in this MIB.
OBJECT-IDENTITY    

ikeConformance 1.3.6.1.4.1.3551.4.1.16.1.5
This is the base object identifier for all objects which describe the conformance for this MIB.
OBJECT-IDENTITY    

Defined Objects

ModpGroupEntry  
SEQUENCE    
  Unsigned32 as modpGroupIndex  
  Unsigned32 as modpFieldSize  
  OCTET STRING as modpPrime  
  OCTET STRING as modpGenerator  
  OCTET STRING as modpLPF  
  Unsigned32 as modpStrength  

EcpGroupEntry  
SEQUENCE    
  Unsigned32 as ecpGroupIndex  
  Unsigned32 as ecpFieldSize  
  OCTET STRING as ecpPrime  
  OCTET STRING as ecpGeneratorOne  
  OCTET STRING as ecpGeneratorTwo  
  OCTET STRING as ecpParameterOne  
  OCTET STRING as ecpParameterTwo  
  OCTET STRING as ecpLPF  
  OCTET STRING as ecpOrder  
  Unsigned32 as ecpStrength  

Ec2nGroupEntry  
SEQUENCE    
  Unsigned32 as ec2nGroupIndex  
  Unsigned32 as ec2nDegree  
  OCTET STRING as ec2nIrrPoly  
  OCTET STRING as ec2nGeneratorOne  
  OCTET STRING as ec2nGeneratorTwo  
  OCTET STRING as ec2nParameterOne  
  OCTET STRING as ec2nParameterTwo  
  OCTET STRING as ec2nLPF  
  OCTET STRING as ec2nOrder  
  Unsigned32 as ec2nStrength  

IkeSaEntry  
SEQUENCE    
  IkeAuthMethod as saAuthMethod  
  IpsecDoiIdentType as saPeerIdType  
  IpsecRawId as saPeerId  
  OCTET STRING as saPeerCertSerialNum  
  OCTET STRING as saPeerCertIssuer  
  IpsecDoiIdentType as saLocalIdType  
  IpsecRawId as saLocalId  
  IkeEncryptionAlgorithm as saEncAlg  
  Unsigned32 as saEncKeyLength  
  IkeHashAlgorithm as saHashAlg  
  Unsigned32 as saHashKeyLength  
  IkePrf as saPRF  
  IkeGroupDescription as saOakleyGroupDesc  
  OBJECT IDENTIFIER as saOakleyGroup  
  Unsigned32 as saLimitSeconds  
  Unsigned32 as saLimitKbytes  
  Unsigned32 as saLimitKeyUses  
  Counter32 as saAccKbytes  
  Counter32 as saKeyUses  
  Counter32 as saCreatedSuites  
  Counter32 as saDeletedSuites  

SaByCreatorsEntry  
SEQUENCE    
  IpsecDoiIdentType as saByCreatorsLocalIdType  
  IpsecRawId as saByCreatorsLocalId  
  IpsecDoiIdentType as saByCreatorsPeerIdType  
  IpsecRawId as saByCreatorsPeerId  
  Unsigned32 as saByCreatorsIndex  
  OBJECT IDENTIFIER as saIkeLocalIpAddress  
  OBJECT IDENTIFIER as saIkeRemoteIpAddress  
  OBJECT IDENTIFIER as saIkeInitiatorCookie  
  OBJECT IDENTIFIER as saIkeResponderCookie  

ExchangeEntry  
SEQUENCE    
  IkeExchangeType as exchangeType  
  Counter32 as exchangeTotalCount  
  Counter32 as exchangeInitiatedCount  
  Counter32 as exchangeRespondedCount  

SuiteEntry  
SEQUENCE    
  Unsigned32 as suiteIndex  
  IpsecIpv6Address as suiteLocalAddress  
  IpsecIpv6Address as suiteRemoteAddress  
  IpsecDoiIdentType as suitePhase1RemoteIdType  
  IpsecRawId as suitePhase1RemoteId  
  IpsecDoiIdentType as suitePhase1LocalIdType  
  IpsecRawId as suitePhase1LocalId  
  IpsecRawId as suiteRemoteId  
  IpsecDoiIdentType as suiteRemoteIdType  
  IpsecRawId as suiteLocalId  
  IpsecDoiIdentType as suiteLocalIdType  
  Integer32 as suiteProtocol  
  Integer32 as suiteRemotePort  
  Integer32 as suiteLocalPort  
  IkeGroupDescription as suiteOakleyGroupDesc  
  OBJECT IDENTIFIER as suiteOakleyGroup  
  Counter32 as suiteLifeSeconds  
  Counter64 as suiteInUserOctets  
  Counter64 as suiteInPackets  
  Counter64 as suiteOutUserOctets  
  Counter64 as suiteOutPackets  
  Counter32 as suiteSendErrors  
  Counter32 as suiteReceiveErrors  

Phase2SaEntry  
SEQUENCE    
  Unsigned32 as saOrder  
  IpsecDoiTransformIdent as saProtocol  
  Unsigned32 as saInSpi  
  Unsigned32 as saOutSpi  

SuiteByCreatorsEntry  
SEQUENCE    
  IpsecDoiIdentType as suiteByCreatorsP1LocalIdType  
  IpsecRawId as suiteByCreatorsP1LocalId  
  IpsecDoiIdentType as suiteByCreatorsP1RemoteIdType  
  IpsecRawId as suiteByCreatorsP1RemoteId  
  Unsigned32 as suiteByCreatorsIndex  
  OBJECT IDENTIFIER as suiteByCreatorsRef  

SuiteBySelectorsEntry  
SEQUENCE    
  IpsecRawId as suiteBySelectorsLocalId  
  IpsecDoiIdentType as suiteBySelectorsLocalIdType  
  IpsecRawId as suiteBySelectorsRemoteId  
  IpsecDoiIdentType as suiteBySelectorsRemoteIdType  
  Integer32 as suiteBySelectorsProtocol  
  Integer32 as suiteBySelectorsLocalPort  
  Integer32 as suiteBySelectorsRemotePort  
  Unsigned32 as suiteBySelectorsIndex  
  OBJECT IDENTIFIER as suiteBySelectorsRef  

IpsecSaInSuiteEntry  
SEQUENCE    
  IpsecIpv6Address as ipsecSaInSuiteDestAddress  
  IpsecDoiSecProtocolId as ipsecSaInSuiteProtocol  
  Unsigned32 as ipsecSaInSuiteSpi  
  OBJECT IDENTIFIER as ipsecSaInSuiteRef  

NotifyCountEntry  
SEQUENCE    
  IpsecDoiSecProtocolId as notifyProtocol  
  IkeNotifyMessageType as notifyType  
  Counter32 as notifySentCount  
  Counter32 as notifyReceivedCount