INTEL-L3TC-MIB

File: INTEL-L3TC-MIB.mib (8340 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
INTEL-GEN-MIB

Imported symbols

IpAddress DisplayString OBJECT-TYPE
mib2ext

Defined Objects

l3tcache 1.3.6.1.4.1.343.6.37
OBJECT IDENTIFIER    

l3tcFrontPorts 1.3.6.1.4.1.343.6.37.1
OBJECT IDENTIFIER    

l3tcFrontPortsTable 1.3.6.1.4.1.343.6.37.1.1
Numbers and Cache-modes of front ports
OBJECT-TYPE    
  SEQUENCE OF  
    L3tcFrontPortsEntry

l3tcFrontPortsEntry 1.3.6.1.4.1.343.6.37.1.1.1
OBJECT-TYPE    
  L3tcFrontPortsEntry  

l3tcFrontPortsNumber 1.3.6.1.4.1.343.6.37.1.1.1.1
Front Port number 1..24 identifying subject front port
OBJECT-TYPE    
  INTEGER  

l3tcFrontPortsMode 1.3.6.1.4.1.343.6.37.1.1.1.2
Tells the mode (normal/client/server) of the port
OBJECT-TYPE    
  INTEGER normal(1), client(2), server(3)  

l3tcServers 1.3.6.1.4.1.343.6.37.2
OBJECT IDENTIFIER    

l3tcServersTable 1.3.6.1.4.1.343.6.37.2.1
UserGroup membership for prefices of IP-addresses
OBJECT-TYPE    
  SEQUENCE OF  
    L3tcServersEntry

l3tcServersEntry 1.3.6.1.4.1.343.6.37.2.1.1
OBJECT-TYPE    
  L3tcServersEntry  

l3tcServersIndex 1.3.6.1.4.1.343.6.37.2.1.1.1
Box-wide uniquely identifying number of subject cache server
OBJECT-TYPE    
  INTEGER  

l3tcServersIpAddress 1.3.6.1.4.1.343.6.37.2.1.1.2
IpAddress of subject cache server
OBJECT-TYPE    
  IpAddress  

l3tcServersDeleteEntry 1.3.6.1.4.1.343.6.37.2.1.1.3
Write 1 to this attribute to delete entire entry. Write 2 to a non-existing row creates a new row.
OBJECT-TYPE    
  INTEGER  

l3tcServersPortNumber 1.3.6.1.4.1.343.6.37.2.1.1.4
Identifies the Front Port to which this server is attached
OBJECT-TYPE    
  INTEGER  

l3tcServersHeartBeatUrl 1.3.6.1.4.1.343.6.37.2.1.1.5
The URL to request when performing heart-beat checking
OBJECT-TYPE    
  DisplayString SIZE(80)  

l3tcServersName 1.3.6.1.4.1.343.6.37.2.1.1.6
The name for identification of the server presented to the operator
OBJECT-TYPE    
  DisplayString SIZE(20)  

l3tcServersHeartBeatStatus 1.3.6.1.4.1.343.6.37.2.1.1.7
Actual status of heart-beat monitoring of server
OBJECT-TYPE    
  INTEGER ok(1), retrying(2), noResponse(3)  

l3tcTcpPorts 1.3.6.1.4.1.343.6.37.3
OBJECT IDENTIFIER    

l3tcTcpPortsTable 1.3.6.1.4.1.343.6.37.3.1
List of Tcp Port Numbers subject to l3tc-routing
OBJECT-TYPE    
  SEQUENCE OF  
    L3tcTcpPortsEntry

l3tcTcpPortsEntry 1.3.6.1.4.1.343.6.37.3.1.1
OBJECT-TYPE    
  L3tcTcpPortsEntry  

l3tcTcpPortsNumber 1.3.6.1.4.1.343.6.37.3.1.1.1
This TCP Port Number is subject to t-cache-forwarding
OBJECT-TYPE    
  INTEGER  

l3tcTcpPortsDeleteEntry 1.3.6.1.4.1.343.6.37.3.1.1.2
Write 1 to this attribute to delete entire entry. Write 2 to a non-existing row creates a new row.
OBJECT-TYPE    
  INTEGER  

l3tcStaticIPs 1.3.6.1.4.1.343.6.37.4
OBJECT IDENTIFIER    

l3tcStaticIPsTable 1.3.6.1.4.1.343.6.37.4.1
Operator-assigned servers for particular IP sites
OBJECT-TYPE    
  SEQUENCE OF  
    L3tcStaticIPsEntry

l3tcStaticIPsEntry 1.3.6.1.4.1.343.6.37.4.1.1
OBJECT-TYPE    
  L3tcStaticIPsEntry  

l3tcStaticIPsPacketDestIP 1.3.6.1.4.1.343.6.37.4.1.1.1
IP Address of subject IP site
OBJECT-TYPE    
  IpAddress  

l3tcStaticIPsDeleteEntry 1.3.6.1.4.1.343.6.37.4.1.1.2
Write 1 to this attribute to delete entire entry. Write 2 to a non-existing row creates a new row.
OBJECT-TYPE    
  INTEGER  

l3tcStaticIPsServerIndex 1.3.6.1.4.1.343.6.37.4.1.1.3
Index value of cache server assigned to subject IP site
OBJECT-TYPE    
  INTEGER  

l3tcSingleAttrs 1.3.6.1.4.1.343.6.37.5
OBJECT IDENTIFIER    

l3tcPollingInterval 1.3.6.1.4.1.343.6.37.5.1
Interval in seconds between successive heart-beat-polls
OBJECT-TYPE    
  INTEGER  

l3tcEnabled 1.3.6.1.4.1.343.6.37.5.2
Whether or not the TC routing is enabled
OBJECT-TYPE    
  INTEGER on(1), off(2)  

l3tcRevertToDefaults 1.3.6.1.4.1.343.6.37.5.3
This is a bit mask setting selected parts of the configuration to factory defaults. value & 1: causes all front ports to revert to normal mode. All servers referring to a leaving-server-mode frontport are deleted too and all static sites reffering to deleted servers are deleted too. value & 2: removes all servers and all static sites value & 4: removes all TCP-protocols value & 8: removes all static sites value & 16: sets polling interval to 30 seconds and switches off the entire transparent caching facility As an example setting this attribute to the value 31 completely restores factory defaults.
OBJECT-TYPE    
  INTEGER  

Defined Objects

L3tcFrontPortsEntry  
SEQUENCE    
  INTEGER as l3tcFrontPortsNumber  
  INTEGER as l3tcFrontPortsMode  

L3tcServersEntry  
SEQUENCE    
  INTEGER as l3tcServersIndex  
  IpAddress as l3tcServersIpAddress  
  INTEGER as l3tcServersDeleteEntry  
  INTEGER as l3tcServersPortNumber  
  DisplayString as l3tcServersHeartBeatUrl SIZE(80)  
  DisplayString as l3tcServersName SIZE(20)  
  INTEGER as l3tcServersHeartBeatStatus  

L3tcTcpPortsEntry  
SEQUENCE    
  INTEGER as l3tcTcpPortsNumber  
  INTEGER as l3tcTcpPortsDeleteEntry  

L3tcStaticIPsEntry  
SEQUENCE    
  IpAddress as l3tcStaticIPsPacketDestIP  
  INTEGER as l3tcStaticIPsDeleteEntry  
  INTEGER as l3tcStaticIPsServerIndex