IPSECV1-MIB

File: IPSECV1-MIB.mib (59023 bytes)

Imported modules

RFC1155-SMI RFC-1215 RFC-1212
RFC1213-MIB

Imported symbols

TimeTicks Counter Gauge
enterprises TRAP-TYPE OBJECT-TYPE
DisplayString

Defined Objects

ibmIROCroutingIpSec 1.3.6.1.4.1.2.6.119.4.9
OBJECT IDENTIFIER    

ipSecLevels 1.3.6.1.4.1.2.6.119.4.9.1
OBJECT IDENTIFIER    

ikeTunnelStart 1.3.6.1.4.1.2.6.119.4.9.1
This TRAP is generated when an IPsec IKE Phase-1 Tunnel is created.
TRAP-TYPE    
  ikeTunnelIndex  
  ikeTunnelId  

ipSecMibLevel 1.3.6.1.4.1.2.6.119.4.9.1.1
The level of the IBM IPSec MIB.
OBJECT-TYPE    
  INTEGER  

ipSecPhaseOne 1.3.6.1.4.1.2.6.119.4.9.2
OBJECT IDENTIFIER    

ikeTunnelStop 1.3.6.1.4.1.2.6.119.4.9.2
This TRAP is generated when an IPsec IKE Phase-1 Tunnel is stopped.
TRAP-TYPE    
  ikeTunnelIndex  
  ikeTunnelId  
  ikeTunnelActiveTime  

ikeTunnelTable 1.3.6.1.4.1.2.6.119.4.9.2.1
The objects defined in this table are used to for the management of IKE (Phase-1) Tunnel. There is one entry in this table for each Phase-1 Tunnel.
OBJECT-TYPE    
  SEQUENCE OF  
    IkeTunnelEntry

ikeTunnelEntry 1.3.6.1.4.1.2.6.119.4.9.2.1.1
Each entry contains attributes associated with a Phase-1 IKE tunnel.
OBJECT-TYPE    
  IkeTunnelEntry  

ikeTunnelIndex 1.3.6.1.4.1.2.6.119.4.9.2.1.1.1
The index of the Phase-1 Tunnel table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ikeTunnelId 1.3.6.1.4.1.2.6.119.4.9.2.1.1.2
The internal ID of the Phase-1 Tunnel.
OBJECT-TYPE    
  OCTET STRING  

ikeTunnelLocalAddr 1.3.6.1.4.1.2.6.119.4.9.2.1.1.3
The local IP Address the Phase-1 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

ikeTunnelLocalName 1.3.6.1.4.1.2.6.119.4.9.2.1.1.4
The local name of the Phase-1 Tunnel.
OBJECT-TYPE    
  DisplayString  

ikeTunnelRemoteAddr 1.3.6.1.4.1.2.6.119.4.9.2.1.1.5
The local IP Address the Phase-1 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

ikeTunnelRemoteName 1.3.6.1.4.1.2.6.119.4.9.2.1.1.6
The remote name of the Phase-1 Tunnel.
OBJECT-TYPE    
  DisplayString  

ikeTunnelNegoMode 1.3.6.1.4.1.2.6.119.4.9.2.1.1.7
The negotiation mode of the Phase-1 Tunnel.
OBJECT-TYPE    
  INTEGER main(1), aggressive(2)  

ikeTunnelLifetime 1.3.6.1.4.1.2.6.119.4.9.2.1.1.8
The lifetime of the Phase-1 Tunnel in seconds.
OBJECT-TYPE    
  INTEGER 0..65535  

ikeTunnelActiveTime 1.3.6.1.4.1.2.6.119.4.9.2.1.1.9
The length of time the tunnel has been active in hundredths of seconds.
OBJECT-TYPE    
  TimeTicks  

ikeTunnelSaRefreshThreshold 1.3.6.1.4.1.2.6.119.4.9.2.1.1.10
The security association refresh threshold percentage of the Phase-1 Tunnel.
OBJECT-TYPE    
  INTEGER 0..100  

ikeTunnelTotalRefreshes 1.3.6.1.4.1.2.6.119.4.9.2.1.1.11
The total number of security associations refreshes completed.
OBJECT-TYPE    
  Counter  

ikeTunnelInOctets 1.3.6.1.4.1.2.6.119.4.9.2.1.1.12
The total number of octets received by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelInPkts 1.3.6.1.4.1.2.6.119.4.9.2.1.1.13
The total number of packets received by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelInDropPkts 1.3.6.1.4.1.2.6.119.4.9.2.1.1.14
The total number of packets dropped by this Phase-1 Tunnel during receive processing.
OBJECT-TYPE    
  Counter  

ikeTunnelInNotifys 1.3.6.1.4.1.2.6.119.4.9.2.1.1.15
The total number of notifications received by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelInP2Proposals 1.3.6.1.4.1.2.6.119.4.9.2.1.1.16
The total number of proposals received by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelInP2ProposalInvalids 1.3.6.1.4.1.2.6.119.4.9.2.1.1.17
The total number of proposals received by this Phase-1 Tunnel which were invalid.
OBJECT-TYPE    
  Counter  

ikeTunnelInP2ProposalRejects 1.3.6.1.4.1.2.6.119.4.9.2.1.1.18
The total number of proposals received by this Phase-1 Tunnel which were rejected.
OBJECT-TYPE    
  Counter  

ikeTunnelInSaDeleteRequests 1.3.6.1.4.1.2.6.119.4.9.2.1.1.19
The total number of security association deleted requests received by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelOutOctets 1.3.6.1.4.1.2.6.119.4.9.2.1.1.20
The total number of octets sent by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelOutPkts 1.3.6.1.4.1.2.6.119.4.9.2.1.1.21
The total number of packets sent by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelOutDropPkts 1.3.6.1.4.1.2.6.119.4.9.2.1.1.22
The total number of packets dropped by this Phase-1 Tunnel during send processing.
OBJECT-TYPE    
  Counter  

ikeTunnelOutNotifys 1.3.6.1.4.1.2.6.119.4.9.2.1.1.23
The total number of notifications sent by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelOutP2Proposals 1.3.6.1.4.1.2.6.119.4.9.2.1.1.24
The total number of Phase-2 Proposals sent by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelOutP2ProposalRejects 1.3.6.1.4.1.2.6.119.4.9.2.1.1.25
The total number of Phase-2 Proposals sent by this Phase-1 Tunnel which were rejected.
OBJECT-TYPE    
  Counter  

ikeTunnelOutSaDeleteRequests 1.3.6.1.4.1.2.6.119.4.9.2.1.1.26
The total number of security association deleted requests sent by this Phase-1 Tunnel.
OBJECT-TYPE    
  Counter  

ikeTunnelStatus 1.3.6.1.4.1.2.6.119.4.9.2.1.1.27
The status of the MIB table row. This object can be used to bring the tunnel down by setting value of this object to destroy(2). This object cannot be used to create a MIB table row.
OBJECT-TYPE    
  INTEGER active(1), destroy(2)  

ipSecPhaseTwo 1.3.6.1.4.1.2.6.119.4.9.3
OBJECT IDENTIFIER    

ipSecTunnelStart 1.3.6.1.4.1.2.6.119.4.9.3
This TRAP is generated when an IPsec Phase-2 Tunnel is created.
TRAP-TYPE    
  ipSecTunnelIndex  
  ipSecTunnelId  

ipSecGlobal 1.3.6.1.4.1.2.6.119.4.9.3.1
OBJECT IDENTIFIER    

ipSecGlobalActiveTunnels 1.3.6.1.4.1.2.6.119.4.9.3.1.1
The total number of currently active IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalPreviousTunnels 1.3.6.1.4.1.2.6.119.4.9.3.1.2
The total number of previously active IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalInOctets 1.3.6.1.4.1.2.6.119.4.9.3.1.3
The total number of octets received by all current and previous IPSec Phase-2 Tunnels. See also ipSecGlobalInOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecGlobalInPkts 1.3.6.1.4.1.2.6.119.4.9.3.1.4
The total number of packets received by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalInDrops 1.3.6.1.4.1.2.6.119.4.9.3.1.5
The total number of packets dropped during receive processing by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalInAuths 1.3.6.1.4.1.2.6.119.4.9.3.1.6
The total number of inbound authentication's performed by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalInAuthFails 1.3.6.1.4.1.2.6.119.4.9.3.1.7
The total number of inbound authentication's which ended in failure by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalInDecrypts 1.3.6.1.4.1.2.6.119.4.9.3.1.8
The total number of inbound decryption's performed by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalInDecryptFails 1.3.6.1.4.1.2.6.119.4.9.3.1.9
The total number of inbound decryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalOutOctets 1.3.6.1.4.1.2.6.119.4.9.3.1.10
The total number of octets sent by all current and previous IPSec Phase-2 Tunnels. See also ipSecGlobalOutOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecGlobalOutPkts 1.3.6.1.4.1.2.6.119.4.9.3.1.11
The total number of packets sent by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalOutDrops 1.3.6.1.4.1.2.6.119.4.9.3.1.12
The total number of packets dropped during send processing by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalOutAuths 1.3.6.1.4.1.2.6.119.4.9.3.1.13
The total number of outbound authentication's performed by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalOutAuthFails 1.3.6.1.4.1.2.6.119.4.9.3.1.14
The total number of outbound authentication's which ended in failure by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalOutEncrypts 1.3.6.1.4.1.2.6.119.4.9.3.1.15
The total number of outbound encryption's performed by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalOutEncryptFails 1.3.6.1.4.1.2.6.119.4.9.3.1.16
The total number of outbound encryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels.
OBJECT-TYPE    
  Counter  

ipSecGlobalInOctWraps 1.3.6.1.4.1.2.6.119.4.9.3.1.17
The number of times the total number of octets received counter (ipSecGlobalInOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecGlobalOutOctWraps 1.3.6.1.4.1.2.6.119.4.9.3.1.18
The number of times the total number of octets sent counter (ipSecGlobalOutOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelTable 1.3.6.1.4.1.2.6.119.4.9.3.2
The IPSec Phase-2 Tunnel table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpSecTunnelEntry

ipSecTunnelEntry 1.3.6.1.4.1.2.6.119.4.9.3.2.1
An IPSec Phase-2 Tunnel entry.
OBJECT-TYPE    
  IpSecTunnelEntry  

ipSecTunnelIndex 1.3.6.1.4.1.2.6.119.4.9.3.2.1.1
The index of the Phase-2 Tunnel table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ipSecTunnelId 1.3.6.1.4.1.2.6.119.4.9.3.2.1.2
The internal ID of the Phase-2 Tunnel.
OBJECT-TYPE    
  INTEGER 0..65535  

ipSecTunnelIkeTunnelIndex 1.3.6.1.4.1.2.6.119.4.9.3.2.1.3
The index of the related IKE Phase-1 Tunnel. (ikeTunnelIndex)
OBJECT-TYPE    
  INTEGER  

ipSecTunnelLocalAddr 1.3.6.1.4.1.2.6.119.4.9.3.2.1.4
The local IP address of the Phase-2 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

ipSecTunnelRemoteAddr 1.3.6.1.4.1.2.6.119.4.9.3.2.1.5
The remote IP address of the Phase-2 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

ipSecTunnelKeyType 1.3.6.1.4.1.2.6.119.4.9.3.2.1.6
The type of key used by the Phase-2 Tunnel.
OBJECT-TYPE    
  INTEGER ike(1), manual(2)  

ipSecTunnelEncapMode 1.3.6.1.4.1.2.6.119.4.9.3.2.1.7
The encapsulation mode used by the Phase-2 Tunnel.
OBJECT-TYPE    
  INTEGER tunnel(1), transport(2)  

ipSecTunnelLifetime 1.3.6.1.4.1.2.6.119.4.9.3.2.1.8
The defined lifetime of the tunnel in hundredths of seconds.
OBJECT-TYPE    
  TimeTicks  

ipSecTunnelActiveTime 1.3.6.1.4.1.2.6.119.4.9.3.2.1.9
The length of time the tunnel has been active in hundredths of seconds.
OBJECT-TYPE    
  TimeTicks  

ipSecTunnelSaRefreshThreshold 1.3.6.1.4.1.2.6.119.4.9.3.2.1.10
The security association refresh threshold percentage of the tunnel.
OBJECT-TYPE    
  INTEGER 0..100  

ipSecTunnelTotalRefreshes 1.3.6.1.4.1.2.6.119.4.9.3.2.1.11
The number of security association refreshes performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelExpiredSaInstances 1.3.6.1.4.1.2.6.119.4.9.3.2.1.12
The number of security association which have expired.
OBJECT-TYPE    
  Counter  

ipSecTunnelCurrentSaInstances 1.3.6.1.4.1.2.6.119.4.9.3.2.1.13
The number of security associations which are currently active or expiring.
OBJECT-TYPE    
  Gauge  

ipSecTunnelInSaEncrypt 1.3.6.1.4.1.2.6.119.4.9.3.2.1.14
The encryption used by the inbound security association.
OBJECT-TYPE    
  INTEGER espNone(1), espDesIv64(2), espDes(3), esp3Des(4), espRc5(5), espIdea(6), espCast(7), espBlowfish(8), esp3iDes(9), espDesIv32(10), espRc4(11), espCdmf(12)  

ipSecTunnelInSaAuthAlgo 1.3.6.1.4.1.2.6.119.4.9.3.2.1.15
The authentication algorithm used by the inbound security association.
OBJECT-TYPE    
  INTEGER none(1), hmacMd5(2), hmacSha(3), desMac(4), kpdk(5)  

ipSecTunnelOutSaEncrypt 1.3.6.1.4.1.2.6.119.4.9.3.2.1.16
The encryption used by the outbound security association.
OBJECT-TYPE    
  INTEGER espNone(1), espDesIv64(2), espDes(3), esp3Des(4), espRc5(5), espIdea(6), espCast(7), espBlowfish(8), esp3iDes(9), espDesIv32(10), espRc4(11), espCdmf(12)  

ipSecTunnelOutSaAuthAlgo 1.3.6.1.4.1.2.6.119.4.9.3.2.1.17
The authentication algorithm used by the outbound security association.
OBJECT-TYPE    
  INTEGER none(1), hmacMd5(2), hmacSha(3), desMac(4), kpdk(5)  

ipSecTunnelInOctets 1.3.6.1.4.1.2.6.119.4.9.3.2.1.18
The number of octets received. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also ipSecTunnelInOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelInDecompOctets 1.3.6.1.4.1.2.6.119.4.9.3.2.1.19
The number of decompressed octets received. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of ipSecTunnelInOctets. See also ipSecTunnelInDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelInPkts 1.3.6.1.4.1.2.6.119.4.9.3.2.1.20
The number of packets received.
OBJECT-TYPE    
  Counter  

ipSecTunnelInDropPkts 1.3.6.1.4.1.2.6.119.4.9.3.2.1.21
The number of packets dropped during received processing.
OBJECT-TYPE    
  Counter  

ipSecTunnelInAuths 1.3.6.1.4.1.2.6.119.4.9.3.2.1.22
The total number of inbound authentication's performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelInAuthFails 1.3.6.1.4.1.2.6.119.4.9.3.2.1.23
The number of inbound authentication's which failed.
OBJECT-TYPE    
  Counter  

ipSecTunnelInDecrypts 1.3.6.1.4.1.2.6.119.4.9.3.2.1.24
The total number of inbound decryption's performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelInDecryptFails 1.3.6.1.4.1.2.6.119.4.9.3.2.1.25
The number of inbound decryption's which failed.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutOctets 1.3.6.1.4.1.2.6.119.4.9.3.2.1.26
The number of octets sent. This value is accumulated AFTER determining whether or not the packet should be compressed. See also ipSecTunnelOutOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutUncompOctets 1.3.6.1.4.1.2.6.119.4.9.3.2.1.27
The number of uncompressed octets sent. This value is accumulated BEFORE the packet is compress. If compression is not being used, this value will match the value of ipSecTunnelOutOctets. See also ipSecTunnelOutUncompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutPkts 1.3.6.1.4.1.2.6.119.4.9.3.2.1.28
The number of packets sent.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutDropPkts 1.3.6.1.4.1.2.6.119.4.9.3.2.1.29
The number of packets dropped during send processing.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutAuths 1.3.6.1.4.1.2.6.119.4.9.3.2.1.30
The total number of outbound authentication's performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutAuthFails 1.3.6.1.4.1.2.6.119.4.9.3.2.1.31
The number of outbound authentication's which failed.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutEncrypts 1.3.6.1.4.1.2.6.119.4.9.3.2.1.32
The total number of outbound encryption's performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutEncryptFails 1.3.6.1.4.1.2.6.119.4.9.3.2.1.33
The number of outbound encryption's which failed.
OBJECT-TYPE    
  Counter  

ipSecTunnelStatus 1.3.6.1.4.1.2.6.119.4.9.3.2.1.34
The status of the MIB table row. This object can be used to: 1) allow user-data traffic flow through this tunnel by setting this the value of this object to active (1). 2 bring the tunnel down by setting the value of this object to destroy(2). 3) stop all user-data traffic flow through the tunnel by setting the value of this object to disable(3). This object cannot be used to create a MIB table row. Valid Status Changes New Status +---------+---------+---------+ Current Status | active | destroy | disable | +---------------+=========+=========+=========+ | active | Valid | Valid | Valid | +---------------+---------+---------+---------+ | destroy | Invalid | Invalid | Invalid | +---------------+---------+---------+---------+ | disable | Valid | Valid | Valid | +---------------+---------+---------+---------+
OBJECT-TYPE    
  INTEGER active(1), destroy(2), disabled(3)  

ipSecTunnelInOctWraps 1.3.6.1.4.1.2.6.119.4.9.3.2.1.35
The number of times the octets received counter (ipSecTunnelInOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelInDecompOctWraps 1.3.6.1.4.1.2.6.119.4.9.3.2.1.36
The number of times the decompressed octets received counter (ipSecTunnelInDecompOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutOctWraps 1.3.6.1.4.1.2.6.119.4.9.3.2.1.37
The number of times the octets sent counter (ipSecTunnelOutOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelOutUncompOctWraps 1.3.6.1.4.1.2.6.119.4.9.3.2.1.38
The number of times the uncompressed octets sent counter (ipSecTunnelOutUncompOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecClientTable 1.3.6.1.4.1.2.6.119.4.9.3.3
The IPSec Phase-2 Tunnel Client table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpSecClientEntry

ipSecClientEntry 1.3.6.1.4.1.2.6.119.4.9.3.3.1
An IPSec Phase-2 Tunnel Client entry.
OBJECT-TYPE    
  IpSecClientEntry  

ipSecClientIndex 1.3.6.1.4.1.2.6.119.4.9.3.3.1.1
The number of the Client associated with the Phase-2 Tunnel table. The value of this number begins at one and is incremented with each Client associated with a Phase-2 Tunnel. For example, each Phase-2 Tunnel may have Client Indices of 1 through 65,535. The value of this object will wrap at 65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ipSecClientLocalName 1.3.6.1.4.1.2.6.119.4.9.3.3.1.2
The local name of the Client.
OBJECT-TYPE    
  DisplayString  

ipSecClientLocalType 1.3.6.1.4.1.2.6.119.4.9.3.3.1.3
The local entry type. Possible values are: 1) The local IP Address Range is being used, or 2) The local IP Subnet Mask is being used.
OBJECT-TYPE    
  INTEGER ipAddrRangeEntry(1), ipSubnetMaskEntry(2)  

ipSecClientLocalProtocol 1.3.6.1.4.1.2.6.119.4.9.3.3.1.4
The local protocol number for this Client.
OBJECT-TYPE    
  INTEGER 1..255  

ipSecClientLocalSubnetMask 1.3.6.1.4.1.2.6.119.4.9.3.3.1.5
The local subnet mask of the Client.
OBJECT-TYPE    
  IPSIpAddress  

ipSecClientLocalHiAddr 1.3.6.1.4.1.2.6.119.4.9.3.3.1.6
The local high IP Address of the Client.
OBJECT-TYPE    
  IPSIpAddress  

ipSecClientLocalLoAddr 1.3.6.1.4.1.2.6.119.4.9.3.3.1.7
The local low IP Address of the Client.
OBJECT-TYPE    
  IPSIpAddress  

ipSecClientLocalPort 1.3.6.1.4.1.2.6.119.4.9.3.3.1.8
The local port of the Client.
OBJECT-TYPE    
  INTEGER  

ipSecClientRemoteName 1.3.6.1.4.1.2.6.119.4.9.3.3.1.9
The remote name of the Client.
OBJECT-TYPE    
  DisplayString  

ipSecClientRemoteType 1.3.6.1.4.1.2.6.119.4.9.3.3.1.10
The remote entry type. Possible values are: 1) The remote IP Address Range is being used, or 2) The remote IP Subnet Mask is being used.
OBJECT-TYPE    
  INTEGER ipAddrRangeEntry(1), ipSubnetMaskEntry(2)  

ipSecClientRemoteProtocol 1.3.6.1.4.1.2.6.119.4.9.3.3.1.11
The remote protocol number for this Client.
OBJECT-TYPE    
  INTEGER 1..255  

ipSecClientRemoteSubnetMask 1.3.6.1.4.1.2.6.119.4.9.3.3.1.12
The remote subnet mask of the Client.
OBJECT-TYPE    
  IPSIpAddress  

ipSecClientRemoteHiAddr 1.3.6.1.4.1.2.6.119.4.9.3.3.1.13
The remote high IP Address of the Client.
OBJECT-TYPE    
  IPSIpAddress  

ipSecClientRemoteLoAddr 1.3.6.1.4.1.2.6.119.4.9.3.3.1.14
The remote low IP Address of the Client.
OBJECT-TYPE    
  IPSIpAddress  

ipSecClientRemotePort 1.3.6.1.4.1.2.6.119.4.9.3.3.1.15
The remote port of the Client.
OBJECT-TYPE    
  INTEGER  

ipSecSpiTable 1.3.6.1.4.1.2.6.119.4.9.3.4
The IPSec Phase-2 Security Protection Index table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpSecSpiEntry

ipSecSpiEntry 1.3.6.1.4.1.2.6.119.4.9.3.4.1
An IPSec Phase-2 Security Protection Index entry.
OBJECT-TYPE    
  IpSecSpiEntry  

ipSecSpiIndex 1.3.6.1.4.1.2.6.119.4.9.3.4.1.1
The number of the SPI associated with the Phase-2 Tunnel table. The value of this number begins at one and is incremented with each SPI associated with a Phase-2 Tunnel. For example, each Phase-2 Tunnel may have Client Indices of 1 through 65,535. The value of this object will wrap at 65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ipSecSpiDirection 1.3.6.1.4.1.2.6.119.4.9.3.4.1.2
The direction of the SPI.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

ipSecSpiValue 1.3.6.1.4.1.2.6.119.4.9.3.4.1.3
The value of the SPI.
OBJECT-TYPE    
  INTEGER  

ipSecSpiProtocol 1.3.6.1.4.1.2.6.119.4.9.3.4.1.4
The protocol of the SPI.
OBJECT-TYPE    
  INTEGER ah(1), esp(2), ipcomp(3)  

ipSecSpiStatus 1.3.6.1.4.1.2.6.119.4.9.3.4.1.5
The status of the SPI.
OBJECT-TYPE    
  INTEGER active(1), expiring(2)  

ipSecHistory 1.3.6.1.4.1.2.6.119.4.9.4
OBJECT IDENTIFIER    

ipSecTunnelStop 1.3.6.1.4.1.2.6.119.4.9.4
This TRAP is generated when an IPsec Phase-2 Tunnel is stopped.
TRAP-TYPE    
  ipSecTunnelIndex  
  ipSecTunnelId  
  ipSecTunnelActiveTime  

ipSecTunnelHistTable 1.3.6.1.4.1.2.6.119.4.9.4.2
The IPSec Phase-2 Tunnel History table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpSecTunnelHistEntry

ipSecTunnelHistEntry 1.3.6.1.4.1.2.6.119.4.9.4.2.1
An IPSec Phase-2 Tunnel History entry.
OBJECT-TYPE    
  IpSecTunnelHistEntry  

ipSecTunnelHistIndex 1.3.6.1.4.1.2.6.119.4.9.4.2.1.1
The index of the IPSec Phase-2 Tunnel History table. The value of the index is a number which begins at one and is incremented with each tunnel that ends. The value of this object will wrap at 65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ipSecTunnelHistId 1.3.6.1.4.1.2.6.119.4.9.4.2.1.2
The internal ID of the Phase-2 Tunnel.
OBJECT-TYPE    
  INTEGER 0..65535  

ipSecTunnelHistLocalAddr 1.3.6.1.4.1.2.6.119.4.9.4.2.1.3
The local IP address of the Phase-2 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

ipSecTunnelHistRemoteAddr 1.3.6.1.4.1.2.6.119.4.9.4.2.1.4
The remote IP address of the Phase-2 Tunnel.
OBJECT-TYPE    
  IPSIpAddress  

ipSecTunnelHistActiveTime 1.3.6.1.4.1.2.6.119.4.9.4.2.1.5
The length of time the tunnel was active in hundredths of seconds.
OBJECT-TYPE    
  TimeTicks  

ipSecTunnelHistTotalRefreshes 1.3.6.1.4.1.2.6.119.4.9.4.2.1.6
The number of security association refreshes performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistTotalSas 1.3.6.1.4.1.2.6.119.4.9.4.2.1.7
The number of security associations which were active or or had expired during the life of the tunnel.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInOctets 1.3.6.1.4.1.2.6.119.4.9.4.2.1.8
The number of octets received. This value is accumulated BEFORE determining whether or not the packet should be decompressed. See also ipSecTunnelHistInOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInDecompOctets 1.3.6.1.4.1.2.6.119.4.9.4.2.1.9
The number of decompressed octets received. This value is accumulated AFTER the packet is decompressed. If compression is not being used, this value will match the value of ipSecTunnelHistInOctets. See also ipSecTunnelHistInDecompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInPkts 1.3.6.1.4.1.2.6.119.4.9.4.2.1.10
The number of packets received.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInDropPkts 1.3.6.1.4.1.2.6.119.4.9.4.2.1.11
The number of packets dropped during received processing.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInAuths 1.3.6.1.4.1.2.6.119.4.9.4.2.1.12
The total number of inbound authentication's performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInAuthFails 1.3.6.1.4.1.2.6.119.4.9.4.2.1.13
The number of inbound authentication's which failed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInDecrypts 1.3.6.1.4.1.2.6.119.4.9.4.2.1.14
The total number of inbound decryption's performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInDecryptFails 1.3.6.1.4.1.2.6.119.4.9.4.2.1.15
The number of inbound decryption's which failed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutOctets 1.3.6.1.4.1.2.6.119.4.9.4.2.1.16
The number of octets sent. This value is accumulated AFTER determining whether or not the packet should be compressed. See also ipSecTunnelHistOutOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutUncompOctets 1.3.6.1.4.1.2.6.119.4.9.4.2.1.17
The number of uncompressed octets sent. This value is accumulated BEFORE the packet is compress. If compression is not being used, this value will match the value of ipSecTunnelHistOutOctets. See also ipSecTunnelHistOutUncompOctWraps for the number of times this counter has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutPkts 1.3.6.1.4.1.2.6.119.4.9.4.2.1.18
The number of packets sent.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutDropPkts 1.3.6.1.4.1.2.6.119.4.9.4.2.1.19
The number of packets dropped during send processing.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutAuths 1.3.6.1.4.1.2.6.119.4.9.4.2.1.20
The total number of outbound authentication's performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutAuthFails 1.3.6.1.4.1.2.6.119.4.9.4.2.1.21
The number of outbound authentication's which failed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutEncrypts 1.3.6.1.4.1.2.6.119.4.9.4.2.1.22
The total number of outbound encryption's performed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutEncryptFails 1.3.6.1.4.1.2.6.119.4.9.4.2.1.23
The number of outbound encryption's which failed.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInOctWraps 1.3.6.1.4.1.2.6.119.4.9.4.2.1.24
The number of times the octets received counter (ipSecTunnelHistInOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistInDecompOctWraps 1.3.6.1.4.1.2.6.119.4.9.4.2.1.25
The number of times the decompressed octets received counter (ipSecTunnelHistInDecompOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutOctWraps 1.3.6.1.4.1.2.6.119.4.9.4.2.1.26
The number times the octets sent counter (ipSecTunnelHistOutOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecTunnelHistOutUncompOctWraps 1.3.6.1.4.1.2.6.119.4.9.4.2.1.27
The number times the uncompressed octets sent counter (ipSecTunnelHistOutUncompOctets) has wrapped.
OBJECT-TYPE    
  Counter  

ipSecFailTable 1.3.6.1.4.1.2.6.119.4.9.4.3
The IPSec Phase-2 Failure table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpSecFailEntry

ipSecFailEntry 1.3.6.1.4.1.2.6.119.4.9.4.3.1
An IPSec Phase-2 Failure entry.
OBJECT-TYPE    
  IpSecFailEntry  

ipSecFailIndex 1.3.6.1.4.1.2.6.119.4.9.4.3.1.1
The index of the IPSec Phase-2 Failure table. The value of the index is a number which begins at one and is incremented with each failure that occurs. The value of this object will wrap at 65535.
OBJECT-TYPE    
  INTEGER 1..65535  

ipSecFailReason 1.3.6.1.4.1.2.6.119.4.9.4.3.1.2
The reason for the failure.
OBJECT-TYPE    
  INTEGER other(1), sendAuthentication(2), recvAuthentication(3), decryption(4), encryption(5), compression(6), decompression(7)  

ipSecFailTime 1.3.6.1.4.1.2.6.119.4.9.4.3.1.3
The time of the failure in hundredths of seconds.
OBJECT-TYPE    
  TimeTicks  

ipSecFailTunnelIndex 1.3.6.1.4.1.2.6.119.4.9.4.3.1.4
The Phase-2 Tunnel index (ipSecTunnelIndex).
OBJECT-TYPE    
  INTEGER 0..65535  

ipSecFailTunnelId 1.3.6.1.4.1.2.6.119.4.9.4.3.1.5
The internal ID of the Phase-2 Tunnel.
OBJECT-TYPE    
  INTEGER 0..65535  

ipSecFailSaSpi 1.3.6.1.4.1.2.6.119.4.9.4.3.1.6
The security association SPI value.
OBJECT-TYPE    
  INTEGER  

ipSecFailPktSrcAddr 1.3.6.1.4.1.2.6.119.4.9.4.3.1.7
The packet's source IP address.
OBJECT-TYPE    
  IPSIpAddress  

ipSecFailPktDstAddr 1.3.6.1.4.1.2.6.119.4.9.4.3.1.8
The packet's destination IP address.
OBJECT-TYPE    
  IPSIpAddress  

ipSecTrapCntl 1.3.6.1.4.1.2.6.119.4.9.5
OBJECT IDENTIFIER    

ipSecAuthFail 1.3.6.1.4.1.2.6.119.4.9.5
This TRAP is generated when a IPsec Phase-2 authenication failure is detected.
TRAP-TYPE    
  ipSecTunnelIndex  
  ipSecTunnelId  
  ipSecFailTime  
  ipSecFailPktSrcAddr  
  ipSecFailPktDstAddr  

ipSecTrapCntlIkeTunnelStart 1.3.6.1.4.1.2.6.119.4.9.5.1
This object defines the administrative state of sending the IPSec IKE Phase-1 Tunnel Start TRAP
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecTrapCntlIkeTunnelStop 1.3.6.1.4.1.2.6.119.4.9.5.2
This object defines the administrative state of sending the IPSec IKE Phase-1 Tunnel Stop TRAP
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecTrapCntlP2TunnelStart 1.3.6.1.4.1.2.6.119.4.9.5.3
This object defines the administrative state of sending the IPSec Phase-2 Tunnel Start TRAP
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecTrapCntlP2TunnelStop 1.3.6.1.4.1.2.6.119.4.9.5.4
This object defines the administrative state of sending the IPSec Phase-2 Tunnel Stop TRAP
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecTrapCntlAuthFail 1.3.6.1.4.1.2.6.119.4.9.5.5
This object defines the administrative state of sending the IPSec Authentication Failure TRAP
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecTrapCntlDecryptFail 1.3.6.1.4.1.2.6.119.4.9.5.6
This object defines the administrative state of sending the IPSec Decryption Failure TRAP
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ipSecDecryptFail 1.3.6.1.4.1.2.6.119.4.9.6
This TRAP is generated when a IPsec Phase-2 decryption failure is detected.
TRAP-TYPE    
  ipSecTunnelIndex  
  ipSecTunnelId  
  ipSecFailTime  
  ipSecFailPktSrcAddr  
  ipSecFailPktDstAddr  

Defined Objects

IPSIpAddress  
OCTET STRING SIZE(4 | 16)    

IkeTunnelEntry  
SEQUENCE    
  INTEGER as ikeTunnelIndex  
  OCTET STRING as ikeTunnelId  
  IPSIpAddress as ikeTunnelLocalAddr  
  DisplayString as ikeTunnelLocalName  
  IPSIpAddress as ikeTunnelRemoteAddr  
  DisplayString as ikeTunnelRemoteName  
  INTEGER as ikeTunnelNegoMode  
  INTEGER as ikeTunnelLifetime  
  TimeTicks as ikeTunnelActiveTime  
  INTEGER as ikeTunnelSaRefreshThreshold  
  Counter as ikeTunnelTotalRefreshes  
  Counter as ikeTunnelInOctets  
  Counter as ikeTunnelInPkts  
  Counter as ikeTunnelInDropPkts  
  Counter as ikeTunnelInNotifys  
  Counter as ikeTunnelInP2Proposals  
  Counter as ikeTunnelInP2ProposalInvalids  
  Counter as ikeTunnelInP2ProposalRejects  
  Counter as ikeTunnelInSaDeleteRequests  
  Counter as ikeTunnelOutOctets  
  Counter as ikeTunnelOutPkts  
  Counter as ikeTunnelOutDropPkts  
  Counter as ikeTunnelOutNotifys  
  Counter as ikeTunnelOutP2Proposals  
  Counter as ikeTunnelOutP2ProposalRejects  
  Counter as ikeTunnelOutSaDeleteRequests  
  INTEGER as ikeTunnelStatus  

IpSecTunnelEntry  
SEQUENCE    
  INTEGER as ipSecTunnelIndex  
  INTEGER as ipSecTunnelId  
  INTEGER as ipSecTunnelIkeTunnelIndex  
  IPSIpAddress as ipSecTunnelLocalAddr  
  IPSIpAddress as ipSecTunnelRemoteAddr  
  INTEGER as ipSecTunnelKeyType  
  INTEGER as ipSecTunnelEncapMode  
  TimeTicks as ipSecTunnelLifetime  
  TimeTicks as ipSecTunnelActiveTime  
  INTEGER as ipSecTunnelSaRefreshThreshold  
  Counter as ipSecTunnelTotalRefreshes  
  Counter as ipSecTunnelExpiredSaInstances  
  Gauge as ipSecTunnelCurrentSaInstances  
  INTEGER as ipSecTunnelInSaEncrypt  
  INTEGER as ipSecTunnelInSaAuthAlgo  
  INTEGER as ipSecTunnelOutSaEncrypt  
  INTEGER as ipSecTunnelOutSaAuthAlgo  
  Counter as ipSecTunnelInOctets  
  Counter as ipSecTunnelInDecompOctets  
  Counter as ipSecTunnelInPkts  
  Counter as ipSecTunnelInDropPkts  
  Counter as ipSecTunnelInAuths  
  Counter as ipSecTunnelInAuthFails  
  Counter as ipSecTunnelInDecrypts  
  Counter as ipSecTunnelInDecryptFails  
  Counter as ipSecTunnelOutOctets  
  Counter as ipSecTunnelOutUncompOctets  
  Counter as ipSecTunnelOutPkts  
  Counter as ipSecTunnelOutDropPkts  
  Counter as ipSecTunnelOutAuths  
  Counter as ipSecTunnelOutAuthFails  
  Counter as ipSecTunnelOutEncrypts  
  Counter as ipSecTunnelOutEncryptFails  
  INTEGER as ipSecTunnelStatus  
  Counter as ipSecTunnelInOctWraps  
  Counter as ipSecTunnelInDecompOctWraps  
  Counter as ipSecTunnelOutOctWraps  
  Counter as ipSecTunnelOutUncompOctWraps  

IpSecClientEntry  
SEQUENCE    
  INTEGER as ipSecClientIndex  
  DisplayString as ipSecClientLocalName  
  INTEGER as ipSecClientLocalProtocol  
  INTEGER as ipSecClientLocalType  
  IPSIpAddress as ipSecClientLocalSubnetMask  
  IPSIpAddress as ipSecClientLocalHiAddr  
  IPSIpAddress as ipSecClientLocalLoAddr  
  INTEGER as ipSecClientLocalPort  
  DisplayString as ipSecClientRemoteName  
  INTEGER as ipSecClientRemoteProtocol  
  INTEGER as ipSecClientRemoteType  
  IPSIpAddress as ipSecClientRemoteSubnetMask  
  IPSIpAddress as ipSecClientRemoteHiAddr  
  IPSIpAddress as ipSecClientRemoteLoAddr  
  INTEGER as ipSecClientRemotePort  

IpSecSpiEntry  
SEQUENCE    
  INTEGER as ipSecSpiIndex  
  INTEGER as ipSecSpiDirection  
  INTEGER as ipSecSpiValue  
  INTEGER as ipSecSpiProtocol  
  INTEGER as ipSecSpiStatus  

IpSecTunnelHistEntry  
SEQUENCE    
  INTEGER as ipSecTunnelHistIndex  
  INTEGER as ipSecTunnelHistId  
  IPSIpAddress as ipSecTunnelHistLocalAddr  
  IPSIpAddress as ipSecTunnelHistRemoteAddr  
  TimeTicks as ipSecTunnelHistActiveTime  
  Counter as ipSecTunnelHistTotalRefreshes  
  Counter as ipSecTunnelHistTotalSas  
  Counter as ipSecTunnelHistInOctets  
  Counter as ipSecTunnelHistInDecompOctets  
  Counter as ipSecTunnelHistInPkts  
  Counter as ipSecTunnelHistInDropPkts  
  Counter as ipSecTunnelHistInAuths  
  Counter as ipSecTunnelHistInAuthFails  
  Counter as ipSecTunnelHistInDecrypts  
  Counter as ipSecTunnelHistInDecryptFails  
  Counter as ipSecTunnelHistOutOctets  
  Counter as ipSecTunnelHistOutUncompOctets  
  Counter as ipSecTunnelHistOutPkts  
  Counter as ipSecTunnelHistOutDropPkts  
  Counter as ipSecTunnelHistOutAuths  
  Counter as ipSecTunnelHistOutAuthFails  
  Counter as ipSecTunnelHistOutEncrypts  
  Counter as ipSecTunnelHistOutEncryptFails  
  Counter as ipSecTunnelHistInOctWraps  
  Counter as ipSecTunnelHistInDecompOctWraps  
  Counter as ipSecTunnelHistOutOctWraps  
  Counter as ipSecTunnelHistOutUncompOctWraps  

IpSecFailEntry  
SEQUENCE    
  INTEGER as ipSecFailIndex  
  INTEGER as ipSecFailReason  
  TimeTicks as ipSecFailTime  
  INTEGER as ipSecFailTunnelIndex  
  INTEGER as ipSecFailTunnelId  
  INTEGER as ipSecFailSaSpi  
  IPSIpAddress as ipSecFailPktSrcAddr  
  IPSIpAddress as ipSecFailPktDstAddr