IPV4-OSPF-MIB

File: IPV4-OSPF-MIB.mib (13272 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC APENT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
IpAddress RowStatus apIpv4Ospf

Defined Objects

apIpv4OspfMib 1.3.6.1.4.1.2467.1.9.3.2.1
This MIB module describes the ArrowPoint enterprise MIB support for the Routing Information Protocol
MODULE-IDENTITY    

apIpv4OspfRedistributeLocal 1.3.6.1.4.1.2467.1.9.3.2.2
If enabled, local (direct) routes will be advertised by OSPF.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

apIpv4OspfLocalType 1.3.6.1.4.1.2467.1.9.3.2.3
If local routes are advertised by OSPF, this is the ASE type to use when advertising the routes.
OBJECT-TYPE    
  INTEGER aseType1(1), aseType2(2)  

apIpv4OspfLocalMetric 1.3.6.1.4.1.2467.1.9.3.2.4
If local routes are advertised by OSPF, this is the metric to use when advertising the routes.
OBJECT-TYPE    
  INTEGER 1..16777215  

apIpv4OspfLocalTag 1.3.6.1.4.1.2467.1.9.3.2.5
If local routes are advertised by OSPF, this is the tag value to use when advertising the routes.
OBJECT-TYPE    
  Integer32  

apIpv4OspfRedistributeStatic 1.3.6.1.4.1.2467.1.9.3.2.6
If enabled, static routes will be advertised by OSPF.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

apIpv4OspfStaticType 1.3.6.1.4.1.2467.1.9.3.2.7
If static routes are advertised by OSPF, this is the ASE type to use when advertising the routes.
OBJECT-TYPE    
  INTEGER aseType1(1), aseType2(2)  

apIpv4OspfStaticMetric 1.3.6.1.4.1.2467.1.9.3.2.8
If static routes are advertised by OSPF, this is the metric to use when advertising the routes.
OBJECT-TYPE    
  INTEGER 1..16777215  

apIpv4OspfStaticTag 1.3.6.1.4.1.2467.1.9.3.2.9
If static routes are advertised by OSPF, this is the tag value to use when advertising the routes.
OBJECT-TYPE    
  Integer32  

apIpv4OspfRedistributeRip 1.3.6.1.4.1.2467.1.9.3.2.10
If enabled, RIP routes will be advertised by OSPF.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

apIpv4OspfRipType 1.3.6.1.4.1.2467.1.9.3.2.11
If RIP routes are advertised by OSPF, this is the ASE type to use when advertising the routes.
OBJECT-TYPE    
  INTEGER aseType1(1), aseType2(2)  

apIpv4OspfRipMetric 1.3.6.1.4.1.2467.1.9.3.2.12
If RIP routes are advertised by OSPF, this is the metric to use when advertising the routes. If zero is specified, the RIP metric will be used.
OBJECT-TYPE    
  INTEGER 0..16777215  

apIpv4OspfRipTag 1.3.6.1.4.1.2467.1.9.3.2.13
If RIP routes are advertised by OSPF, this is the tag value to use when advertising the routes.
OBJECT-TYPE    
  Integer32  

apIpv4OspfOriginateDefault 1.3.6.1.4.1.2467.1.9.3.2.14
If enabled, an ASE will be generated for the default route.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

apIpv4OspfDefaultType 1.3.6.1.4.1.2467.1.9.3.2.15
If a default ASE is originated by OSPF, this is the ASE type to use when advertising the route.
OBJECT-TYPE    
  INTEGER aseType1(1), aseType2(2)  

apIpv4OspfDefaultMetric 1.3.6.1.4.1.2467.1.9.3.2.16
If a default ASE is originated by OSPF, this is the metric to use when advertising the route.
OBJECT-TYPE    
  INTEGER 1..16777215  

apIpv4OspfDefaultTag 1.3.6.1.4.1.2467.1.9.3.2.17
If a default ASE is originated by OSPF, this is the tag value to use when advertising the route.
OBJECT-TYPE    
  Integer32  

apIpv4OspfRedistributeFirewall 1.3.6.1.4.1.2467.1.9.3.2.18
If enabled, firewall routes will be advertised by OSPF.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

apIpv4OspfFirewallType 1.3.6.1.4.1.2467.1.9.3.2.19
If firewall routes are advertised by OSPF, this is the ASE type to use when advertising the routes.
OBJECT-TYPE    
  INTEGER aseType1(1), aseType2(2)  

apIpv4OspfFirewallMetric 1.3.6.1.4.1.2467.1.9.3.2.20
If firewall routes are advertised by OSPF, this is the metric to use when advertising the routes.
OBJECT-TYPE    
  INTEGER 1..16777215  

apIpv4OspfFirewallTag 1.3.6.1.4.1.2467.1.9.3.2.21
If firewall routes are advertised by OSPF, this is the tag value to use when advertising the routes.
OBJECT-TYPE    
  Integer32  

apIpv4OspfAdvRouteTable 1.3.6.1.4.1.2467.1.9.3.2.22
A list of routes that are advertised via all OSPF interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    ApIpv4OspfAdvRouteEntry

apIpv4OspfAdvRouteEntry 1.3.6.1.4.1.2467.1.9.3.2.22.1
A single route to advertise via all OSPF interfaces.
OBJECT-TYPE    
  ApIpv4OspfAdvRouteEntry  

apIpv4OspfAdvRoutePrefix 1.3.6.1.4.1.2467.1.9.3.2.22.1.1
The route prefix to be advertised.
OBJECT-TYPE    
  IpAddress  

apIpv4OspfAdvRoutePrefixLen 1.3.6.1.4.1.2467.1.9.3.2.22.1.2
The network prefix length associated with this route.
OBJECT-TYPE    
  INTEGER 1..32  

apIpv4OspfAdvRouteType 1.3.6.1.4.1.2467.1.9.3.2.22.1.3
this is the ASE type to use when advertising this route.
OBJECT-TYPE    
  INTEGER aseType1(1), aseType2(2)  

apIpv4OspfAdvRouteMetric 1.3.6.1.4.1.2467.1.9.3.2.22.1.4
The metric to use when advertising this route.
OBJECT-TYPE    
  INTEGER 1..16777215  

apIpv4OspfAdvRouteTag 1.3.6.1.4.1.2467.1.9.3.2.22.1.5
this is the tag value to use when advertising this route.
OBJECT-TYPE    
  Integer32  

apIpv4OspfAdvRouteStatus 1.3.6.1.4.1.2467.1.9.3.2.22.1.6
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

apIpv4OspfIfAdvRouteTable 1.3.6.1.4.1.2467.1.9.3.2.23
A list of routes that are advertised via a specific OSPF interface.
OBJECT-TYPE    
  SEQUENCE OF  
    ApIpv4OspfIfAdvRouteEntry

apIpv4OspfIfAdvRouteEntry 1.3.6.1.4.1.2467.1.9.3.2.23.1
A single route to advertise via a specific OSPF interface.
OBJECT-TYPE    
  ApIpv4OspfIfAdvRouteEntry  

apIpv4OspfIfAdvRouteAddress 1.3.6.1.4.1.2467.1.9.3.2.23.1.1
The address of the OSPF interface. If this is a valid unicast IP address, the interface is numbered. Otherwise, it indicates the ifIndex of an unnumbered interface.
OBJECT-TYPE    
  IpAddress  

apIpv4OspfIfAdvRoutePrefix 1.3.6.1.4.1.2467.1.9.3.2.23.1.2
The route prefix to be advertised.
OBJECT-TYPE    
  IpAddress  

apIpv4OspfIfAdvRoutePrefixLen 1.3.6.1.4.1.2467.1.9.3.2.23.1.3
The network prefix length associated with this route.
OBJECT-TYPE    
  INTEGER 1..32  

apIpv4OspfIfAdvRouteType 1.3.6.1.4.1.2467.1.9.3.2.23.1.4
this is the ASE type to use when advertising this route.
OBJECT-TYPE    
  INTEGER aseType1(1), aseType2(2)  

apIpv4OspfIfAdvRouteMetric 1.3.6.1.4.1.2467.1.9.3.2.23.1.5
The metric to use when advertising this route.
OBJECT-TYPE    
  INTEGER 1..16777215  

apIpv4OspfIfAdvRouteTag 1.3.6.1.4.1.2467.1.9.3.2.23.1.6
this is the tag value to use when advertising this route.
OBJECT-TYPE    
  Integer32  

apIpv4OspfIfAdvRouteStatus 1.3.6.1.4.1.2467.1.9.3.2.23.1.7
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
OBJECT-TYPE    
  RowStatus  

apIpv4OspfEqualCostRoutes 1.3.6.1.4.1.2467.1.9.3.2.24
The maximum number of equal-cost routes OSPF can use.
OBJECT-TYPE    
  INTEGER 1..15  

Defined Objects

ApIpv4OspfAdvRouteEntry  
SEQUENCE    
  IpAddress as apIpv4OspfAdvRoutePrefix  
  INTEGER as apIpv4OspfAdvRoutePrefixLen  
  INTEGER as apIpv4OspfAdvRouteType  
  INTEGER as apIpv4OspfAdvRouteMetric  
  Integer32 as apIpv4OspfAdvRouteTag  
  RowStatus as apIpv4OspfAdvRouteStatus  

ApIpv4OspfIfAdvRouteEntry  
SEQUENCE    
  IpAddress as apIpv4OspfIfAdvRouteAddress  
  IpAddress as apIpv4OspfIfAdvRoutePrefix  
  INTEGER as apIpv4OspfIfAdvRoutePrefixLen  
  INTEGER as apIpv4OspfIfAdvRouteType  
  INTEGER as apIpv4OspfIfAdvRouteMetric  
  Integer32 as apIpv4OspfIfAdvRouteTag  
  RowStatus as apIpv4OspfIfAdvRouteStatus