IPV4-STATIC-ROUTES-MIB

File: IPV4-STATIC-ROUTES-MIB.mib (7944 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC APENT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
IpAddress RowStatus TruthValue
apIpv4StaticRoutes

Defined Objects

apIpv4StaticRoutesMib 1.3.6.1.4.1.2467.1.9.5.1
This MIB module describes the ArrowPoint enterprise MIB support for IPv4 Static Routes.
MODULE-IDENTITY    

apIpv4StaticRouteTable 1.3.6.1.4.1.2467.1.9.5.2
A table of IP static routes.
OBJECT-TYPE    
  SEQUENCE OF  
    ApIpv4StaticRouteEntry

apIpv4StaticRouteEntry 1.3.6.1.4.1.2467.1.9.5.2.1
ArrowPoint static route table extensions
OBJECT-TYPE    
  ApIpv4StaticRouteEntry  

apIpv4SrAddress 1.3.6.1.4.1.2467.1.9.5.2.1.1
The route address
OBJECT-TYPE    
  IpAddress  

apIpv4SrPrefixLen 1.3.6.1.4.1.2467.1.9.5.2.1.2
The prefix length of the route.
OBJECT-TYPE    
  Integer32  

apIpv4SrNextHop 1.3.6.1.4.1.2467.1.9.5.2.1.3
The address of the next hop. If this is not a legitimate IP address, it is the ifIndex of an unnumbered interface.
OBJECT-TYPE    
  IpAddress  

apIpv4SrDistance 1.3.6.1.4.1.2467.1.9.5.2.1.4
The administrative distance to assign to the route.
OBJECT-TYPE    
  Integer32 1..254  

apIpv4SrRepeat 1.3.6.1.4.1.2467.1.9.5.2.1.5
DEBUG FEATURE ONLY: The number of consecutive routes to create, starting at this address. Not available in shipping code.
OBJECT-TYPE    
  Integer32  

apIpv4SrInUse 1.3.6.1.4.1.2467.1.9.5.2.1.6
The current state of the route in relation to the forwarding table.
OBJECT-TYPE    
  INTEGER inUse(1), notInUse(2)  

apIpv4SrStatus 1.3.6.1.4.1.2467.1.9.5.2.1.7
(fill in later)
OBJECT-TYPE    
  RowStatus  

apIpv4SrScmOnly 1.3.6.1.4.1.2467.1.9.5.2.1.8
This route is only used for packets originating from the box and is not propagated to SFMs.
OBJECT-TYPE    
  TruthValue  

apIpv4SrFirewall 1.3.6.1.4.1.2467.1.9.5.2.1.9
Indicates whether the switch should use firewall load-balancing for this route.
OBJECT-TYPE    
  TruthValue  

apIpv4SrRouteIndex 1.3.6.1.4.1.2467.1.9.5.2.1.10
Identifies the route index.
OBJECT-TYPE    
  Integer32 1..15  

apIpv4StaticFirewallTable 1.3.6.1.4.1.2467.1.9.5.3
A table of IP static firewalls.
OBJECT-TYPE    
  SEQUENCE OF  
    ApIpv4StaticFirewallEntry

apIpv4StaticFirewallEntry 1.3.6.1.4.1.2467.1.9.5.3.1
ArrowPoint static firewall table extensions
OBJECT-TYPE    
  ApIpv4StaticFirewallEntry  

apIpv4FirewallIndex 1.3.6.1.4.1.2467.1.9.5.3.1.1
The firewall index
OBJECT-TYPE    
  Integer32 1..15  

apIpv4FirewallNextHop 1.3.6.1.4.1.2467.1.9.5.3.1.2
The address of the next hop.
OBJECT-TYPE    
  IpAddress  

apIpv4FirewallRemoteAddress 1.3.6.1.4.1.2467.1.9.5.3.1.3
The assigned firewall IP address that connects to the remote subnet.
OBJECT-TYPE    
  IpAddress  

apIpv4FirewallRemoteSwitch 1.3.6.1.4.1.2467.1.9.5.3.1.4
The switch IP address that is connected to firewall remote subnet.
OBJECT-TYPE    
  IpAddress  

apIpv4FirewallStatus 1.3.6.1.4.1.2467.1.9.5.3.1.5
(fill in later)
OBJECT-TYPE    
  RowStatus  

Defined Objects

ApIpv4StaticRouteEntry  
SEQUENCE    
  IpAddress as apIpv4SrAddress  
  Integer32 as apIpv4SrPrefixLen  
  IpAddress as apIpv4SrNextHop  
  Integer32 as apIpv4SrDistance  
  Integer32 as apIpv4SrRepeat  
  INTEGER as apIpv4SrInUse  
  RowStatus as apIpv4SrStatus  
  TruthValue as apIpv4SrScmOnly  
  TruthValue as apIpv4SrFirewall  
  Integer32 as apIpv4SrRouteIndex  

ApIpv4StaticFirewallEntry  
SEQUENCE    
  Integer32 as apIpv4FirewallIndex  
  IpAddress as apIpv4FirewallNextHop  
  IpAddress as apIpv4FirewallRemoteAddress  
  IpAddress as apIpv4FirewallRemoteSwitch  
  RowStatus as apIpv4FirewallStatus