ISO3201-OPT-MIB

File: ISO3201-OPT-MIB.mib (61720 bytes)

Imported modules

RFC1155-SMI RFC-1212

Imported symbols

Counter Gauge enterprises
OBJECT-TYPE

Defined Objects

codex 1.3.6.1.4.1.449
OBJECT IDENTIFIER    

cdxProductSpecific 1.3.6.1.4.1.449.2
OBJECT IDENTIFIER    

cdx6500 1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER    

cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER    

cdx6500CfgProtocolGroup 1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER    

cdx6500PCTPortProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER    

cdx6500PPCT3201PortTable 1.3.6.1.4.1.449.2.1.2.1.1.28
This table contains the 3201 Port configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPCT3201PortEntry

cdx6500PPCT3201PortEntry 1.3.6.1.4.1.449.2.1.2.1.1.28.1
Entries in the 3201 Port Configuration Table.
OBJECT-TYPE    
  Cdx6500PPCT3201PortEntry  

iso3201PCfgPortNum 1.3.6.1.4.1.449.2.1.2.1.1.28.1.1
Port number of the 3201 port.
OBJECT-TYPE    
  INTEGER 1..54  

iso3201PCfgPortType 1.3.6.1.4.1.449.2.1.2.1.1.28.1.2
The Port Type of the port.
OBJECT-TYPE    
  INTEGER iso3201(50)  

iso3201PCfgPortSpeed 1.3.6.1.4.1.449.2.1.2.1.1.28.1.3
This specifies port speed in bits per second speed300 : 300 bits per second speed600 : 600 bits per second speed1200 : 1200 bits per second speed1800 : 1800 bits per second speed2400 : 2400 bits per second speed4800 : 4800 bits per second speed7200 : 7200 bits per second speed9600 : 9600 bits per second speed19200 : 19200 bits per second .
OBJECT-TYPE    
  INTEGER speed300(3), speed1200(4), speed600(5), speed1800(8), speed2400(13), speed4800(14), speed9600(15), speed19200(16), speed7200(99)  

iso3201PCfgNoOfControllers 1.3.6.1.4.1.449.2.1.2.1.1.28.1.4
This specifies the number of controllers on this line.
OBJECT-TYPE    
  INTEGER 1..16  

iso3201PCfgResponseTimeout 1.3.6.1.4.1.449.2.1.2.1.1.28.1.5
This specifies the amount of time in 1/20th of a second that the PAD waits for a response from a controller. A value of 5 gives a response timeout of 250ms.
OBJECT-TYPE    
  INTEGER 5..255  

iso3201PCfgInterChrTimeout 1.3.6.1.4.1.449.2.1.2.1.1.28.1.6
This specifies the maximum amount of time in 1/20 of a second that the PAD waits between two characters when receiving data from the attatched devices before detecting a line problem. A value of 2 gives an intercharacter timeout of 100ms.
OBJECT-TYPE    
  INTEGER 1..255  

iso3201PCfgNoOfRetries 1.3.6.1.4.1.449.2.1.2.1.1.28.1.7
This specifies the retry limit for polls/selects sent, NAKs sent/received and ENQs sent/received. In case of polls and selects, the controller is placed in slow poll mode on reaching this limit.
OBJECT-TYPE    
  INTEGER 1..255  

iso3201PCfgNoOfConsecRetries 1.3.6.1.4.1.449.2.1.2.1.1.28.1.8
This specifies the number of retries that will be made immediately in case of response timeout on Poll, response timeout on Select or NAK response to select. The next controller in the list will be polled/selected only after these many retries are made for the non-responding controller. All consecutive retries will be counted as one retry attempt.
OBJECT-TYPE    
  INTEGER 0..5  

iso3201PCfgSlowPollWaitCycle 1.3.6.1.4.1.449.2.1.2.1.1.28.1.9
This specifies the number of poll cycles to active controllers before a poll is sent to one controller in the slow poll list.
OBJECT-TYPE    
  INTEGER 1..255  

iso3201PCfgElectricalInterfaceType 1.3.6.1.4.1.449.2.1.2.1.1.28.1.10
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
OBJECT-TYPE    
  INTEGER v24(1), v35(2), v36(3), x21(4), none(5)  

iso3201PCfgV24ElectricalInterfaceOption 1.3.6.1.4.1.449.2.1.2.1.1.28.1.11
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
OBJECT-TYPE    
  INTEGER ri(1), tm(2)  

iso3201PCfgHighSpeedElectricalInterfaceOption 1.3.6.1.4.1.449.2.1.2.1.1.28.1.12
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
OBJECT-TYPE    
  INTEGER none(1), xover(2)  

cdx6500PCTStationProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.3
OBJECT IDENTIFIER    

cdx6500SPCT3201StnTable 1.3.6.1.4.1.449.2.1.2.1.3.7
This table contains the 3201 Station Configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500SPCT3201StnEntry

cdx6500SPCT3201StnEntry 1.3.6.1.4.1.449.2.1.2.1.3.7.1
Entries in the 3201 Station Configuration Table.
OBJECT-TYPE    
  Cdx6500SPCT3201StnEntry  

iso3201SCfgPortNum 1.3.6.1.4.1.449.2.1.2.1.3.7.1.1
Port number of the 3201 port.
OBJECT-TYPE    
  INTEGER 1..54  

iso3201SCfgStnNum 1.3.6.1.4.1.449.2.1.2.1.3.7.1.2
Station number of the 3201 station.
OBJECT-TYPE    
  INTEGER 1..16  

iso3201SCfgControllerAddress 1.3.6.1.4.1.449.2.1.2.1.3.7.1.3
This specifies the address of this controller The valid addresses are : 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F.
OBJECT-TYPE    
  DisplayString  

iso3201SCfgAutocallMnemonic 1.3.6.1.4.1.449.2.1.2.1.3.7.1.4
This specifies the mnemonic used by the PAD to place calls to the Host for this controller. Host initiated calls will be accepted only if this field is blank.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

iso3201SCfgAutocallTimeout 1.3.6.1.4.1.449.2.1.2.1.3.7.1.5
This specifies the time interval in seconds between call attempts.
OBJECT-TYPE    
  INTEGER 5..255  

iso3201SCfgMaxNoAutocallAttempts 1.3.6.1.4.1.449.2.1.2.1.3.7.1.6
This specifies the number of times autocall attempts will be made. A value of 0 will allow unlimited attempts.
OBJECT-TYPE    
  INTEGER 0..255  

iso3201SCfgX25Address 1.3.6.1.4.1.449.2.1.2.1.3.7.1.7
This specifies the X.25 address inserted in the calling address field of the call packet sent by the PAD to the Host. This address identifies the controller to the Host.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

iso3201SCfgBillingRecords 1.3.6.1.4.1.449.2.1.2.1.3.7.1.8
This controls whether billing(accounting) records will be created for calls on this station billingDisabled : billing is disabled billingEnabled : billing is enabled .
OBJECT-TYPE    
  INTEGER billingDisabled(1), billingEnabled(2)  

cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER    

cdx6500StatProtocolGroup 1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER    

cdx6500PSTPortProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER    

cdx6500PPST3201PStatsTable 1.3.6.1.4.1.449.2.1.3.1.1.29
This table contains 3201 Port Statistics parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500PPST3201PStatsEntry

cdx6500PPST3201PStatsEntry 1.3.6.1.4.1.449.2.1.3.1.1.29.1
Entries in the 3201 Port Statistics Table.
OBJECT-TYPE    
  Cdx6500PPST3201PStatsEntry  

iso3201PStatsPortNum 1.3.6.1.4.1.449.2.1.3.1.1.29.1.1
Port Number of the 3201 Port.
OBJECT-TYPE    
  INTEGER 1..54  

iso3201PStatsPortStatus 1.3.6.1.4.1.449.2.1.3.1.1.29.1.2
This indicates the operational status of the port up : port is enabled disabled : port is disabled .
OBJECT-TYPE    
  INTEGER disabled(1), up(2)  

iso3201PStatsPortType 1.3.6.1.4.1.449.2.1.3.1.1.29.1.3
This indicates the type of access protocol for this port.
OBJECT-TYPE    
  INTEGER iso3201(50)  

iso3201PStatsPortSpeed 1.3.6.1.4.1.449.2.1.3.1.1.29.1.4
This specifies port speed in bits per second speed300 : 300 bits per second speed600 : 600 bits per second speed1200 : 1200 bits per second speed1800 : 1800 bits per second speed2400 : 2400 bits per second speed4800 : 4800 bits per second speed7200 : 7200 bits per second speed9600 : 9600 bits per second speed19200 : 19200 bits per second .
OBJECT-TYPE    
  INTEGER speed300(3), speed1200(4), speed600(5), speed1800(8), speed2400(13), speed4800(14), speed9600(15), speed19200(16), speed7200(99)  

iso3201PStatsPortUtilIn 1.3.6.1.4.1.449.2.1.3.1.1.29.1.5
This indicates the port utilization for the line to port direction.
OBJECT-TYPE    
  INTEGER  

iso3201PStatsPortUtilOut 1.3.6.1.4.1.449.2.1.3.1.1.29.1.6
This indicates the port utilization for the port to line direction.
OBJECT-TYPE    
  INTEGER  

iso3201PStatsLineStatus 1.3.6.1.4.1.449.2.1.3.1.1.29.1.7
This indicates the line status : up : if one or more controllers are responding to polls down : if no controllers are responding or garbage is being received.
OBJECT-TYPE    
  INTEGER down(1), up(2)  

iso3201PStatsTxChrs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.8
This specifies the number of characters transmitted.
OBJECT-TYPE    
  Counter  

iso3201PStatsTxMsgs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.9
This specifies the number of data messages transmitted.
OBJECT-TYPE    
  Counter  

iso3201PStatsTxPolls 1.3.6.1.4.1.449.2.1.3.1.1.29.1.10
This specifies the number of polls transmitted.
OBJECT-TYPE    
  Counter  

iso3201PStatsTxSelects 1.3.6.1.4.1.449.2.1.3.1.1.29.1.11
This specifies the number of selects transmitted.
OBJECT-TYPE    
  Counter  

iso3201PStatsTxACKs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.12
This specifies the number of data messages for which ACKs were transmitted.
OBJECT-TYPE    
  Counter  

iso3201PStatsTxNAKs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.13
This specifies the number of messages for which NAKs were transmitted.
OBJECT-TYPE    
  Counter  

iso3201PStatsTxENQs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.14
This specifies the number of ENQs transmitted.
OBJECT-TYPE    
  Counter  

iso3201PStatsRxChrs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.15
This specifies the number of characters received.
OBJECT-TYPE    
  Counter  

iso3201PStatsRxMsgs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.16
This specifies the number of data messages received.
OBJECT-TYPE    
  Counter  

iso3201PStatsRxACKs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.17
This specifies the number of data messages for which ACKs were received.
OBJECT-TYPE    
  Counter  

iso3201PStatsRxNAKs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.18
This specifies the number of messages for which NAKs were received.
OBJECT-TYPE    
  Counter  

iso3201PStatsRxENQs 1.3.6.1.4.1.449.2.1.3.1.1.29.1.19
This specifies the number of ENQs received.
OBJECT-TYPE    
  Counter  

cdx6500PSTStationProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.3
OBJECT IDENTIFIER    

cdx6500SPST3201StnTable 1.3.6.1.4.1.449.2.1.3.1.3.6
OBJECT IDENTIFIER    

cdx6500SPST3201SStatsTable 1.3.6.1.4.1.449.2.1.3.1.3.6.1
This table contains 3201 Station statistics parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500SPST3201StnEntry

cdx6500SPST3201StnEntry 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1
Entries in the 3201 Station statistics table.
OBJECT-TYPE    
  Cdx6500SPST3201StnEntry  

iso3201SStatsPortNum 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.1
Port number of the 3201 port.
OBJECT-TYPE    
  INTEGER 1..54  

iso3201SStatsStnNum 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.2
Station number of the 3201 station.
OBJECT-TYPE    
  INTEGER 1..16  

iso3201SStatsControllerAddress 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.3
This specifies the address of this controller The valid addresses are : 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F.
OBJECT-TYPE    
  DisplayString  

iso3201SStatsStnState 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.4
This indicates the current state of the station up : when responding to polls down : when tries have expired and controller is in slow poll suspended : when polling has been stopped by host blocked : when polling has been stopped because the X.25 channel is blocked disabled : when station is disabled.
OBJECT-TYPE    
  INTEGER disabled(1), down(2), up(3), suspended(4), blocked(5)  

iso3201SStatsCurrentStatus 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.5
This gives information regarding the calls placed by this station on its host. calling : when it is waiting call accept from the host connected : when the connection to the host has been accepted idle : when connection attempts are not in progress (no data to send to the Host), or autocall attempts have been exhausted or when it is waiting for autocall timeout (to send call request again).
OBJECT-TYPE    
  INTEGER idle(1), calling(2), connected(3)  

iso3201SStatsNoOfAutocallAttmpts 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.6
This indicates the number of attempts made to establish connection to the host. This is reset to 0 when a connection is established.
OBJECT-TYPE    
  Gauge  

iso3201SStatsNxtAutocallAttmpt 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.7
This indicates the time (in seconds ) after which the station will place autocall to the host.
OBJECT-TYPE    
  INTEGER  

iso3201SStatsLastClearCauseCode 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.8
Last autocall clear cause code.
OBJECT-TYPE    
  DisplayString  

iso3201SStatsLastClearDiagCode 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.9
Last clear diagnostic code.
OBJECT-TYPE    
  DisplayString  

iso3201SStatsLastInCalledAddress 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.10
This indicates the called address in the last inbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last incoming call packet is not present.
OBJECT-TYPE    
  DisplayString  

iso3201SStatsLastInCallingAddress 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.11
This indicates the calling address in the last inbound request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last incoming call packet is not present.
OBJECT-TYPE    
  DisplayString  

iso3201SStatsLastInCallFacilities 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.12
This indicates the facilities in the last inbound request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last incoming call packet is not present.
OBJECT-TYPE    
  DisplayString  

iso3201SStatsLastInCallCUD 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.13
This indicates the data in the Call User Data field in the last inbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the incoming call packet is not present.
OBJECT-TYPE    
  DisplayString  

iso3201SStatsLastOutCalledAddress 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.14
This indicates the called address in the last outbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last outgoing call packet is not present.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

iso3201SStatsLastOutCallingAddress 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.15
This indicates the calling address in the last outbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last outgoing call packet is not present.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

iso3201SStatsLastOutCallFacilities 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.16
This indicates the facilities in the last outbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last outgoing call packet is not present.
OBJECT-TYPE    
  DisplayString  

iso3201SStatsLastOutCallCUD 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.17
This indicates the data in the Call User Data field in the last outbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last call outgoing packet is not present.
OBJECT-TYPE    
  DisplayString  

cdx6500SPST3201PktSummTable 1.3.6.1.4.1.449.2.1.3.1.3.6.2
This table contains the Packet Summary statistics parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500SPST3201PktSummEntry

cdx6500SPST3201PktSummEntry 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1
Entries in the Packet Summary statistics table.
OBJECT-TYPE    
  Cdx6500SPST3201PktSummEntry  

iso3201SStatsPktSummPortNum 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.1
This specifies the physical port number .
OBJECT-TYPE    
  INTEGER 1..54  

iso3201SStatsPktSummStnNum 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.2
This specifies the entry number of this station.
OBJECT-TYPE    
  INTEGER 1..16  

iso3201SStatsTxData 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.3
This specifies the count of data packets transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxCallRequest 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.4
This specifies the count of call request packets transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxCallAccept 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.5
This specifies the count of call accept packets transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxClearRequest 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.6
This specifies the count of clear request packets transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxClearConfirm 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.7
This specifies the count of clear confirm packets transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxResetRequest 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.8
This specifies the count of reset request packets transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxResetConfirm 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.9
This specifies the count of reset confirm packets transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxWindowClosed 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.10
The 'Transmit Window Closed' counts the number of times the 3201 station could not send data to the adjacent channel because of flow control.
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxData 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.11
This specifies the count of data packets received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxCallRequest 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.12
This specifies the count of call request packets received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxCallAccept 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.13
This specifies the count of call accept packets received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxClearRequest 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.14
This specifies the count of clear request packets received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxClearConfirm 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.15
This specifies the count of clear confirm packets received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxResetRequest 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.16
This specifies the count of reset request packets received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxResetConfirm 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.17
This specifies the count of reset confirm packets received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxWindowClosed 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.18
The 'Receive Window Closed' is incremented every time the 3201 station removes data out of its queue towards the terminal and the number of messages queued is greater than 15.
OBJECT-TYPE    
  Gauge  

cdx6500SPST3201SummTable 1.3.6.1.4.1.449.2.1.3.1.3.6.3
This table contains the 3201 summary statistics parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500SPST3201SummEntry

cdx6500SPST3201SummEntry 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1
Entries in the 3201 Summary statistics table.
OBJECT-TYPE    
  Cdx6500SPST3201SummEntry  

iso3201SStatsSummPortNum 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.1
This specifies the physical port number.
OBJECT-TYPE    
  INTEGER 1..54  

iso3201SStatsSummStnNum 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.2
This specifies the entry number of this station.
OBJECT-TYPE    
  INTEGER 1..16  

iso3201SStatsTxPolls 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.3
This indicates the number of polls transmitted to this controller.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxSelects 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.4
This indicates the number of selects transmitted to this controller.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxDataBytes 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.5
This indicates the number of data bytes transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxDataMsgs 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.6
This specifies the number of data messages transmitted.
OBJECT-TYPE    
  Gauge  

iso3201SStatsTxDataMsgsPerHour 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.7
This specifies the number of data messages transmitted per hour.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxAvgMsgLength 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.8
This indicates the average length of data messages transmitted.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxMsgsNAKed 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.9
This specifies the number of data messages for which NAKs were transmitted.
OBJECT-TYPE    
  Gauge  

iso3201SStatsTxSelectRetryExhausted 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.10
This indicates the number of selects to this controller for which all attempts failed.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxNAKRetryExhausted 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.11
This indicates the number of times the NAK sent retry limit was crossed.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxENQs 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.12
This specifies the number of ENQs transmitted.
OBJECT-TYPE    
  Gauge  

iso3201SStatsTxENQRetryExhausted 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.13
This specifies the number of times the ENQ sent retry limit was crossed.
OBJECT-TYPE    
  Counter  

iso3201SStatsTxPollingSuspendedByHost 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.14
This specifies the number of times polling was suspended on account of receiving an interrupt packet from the host.
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxDataBytes 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.15
This indicates the number of data bytes received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxDataMsgs 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.16
This specifies the number of data messages received.
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxDataMsgsPerHour 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.17
This specifies the number of data messages received per hour.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxAvgMsgLength 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.18
This indicates the average length of data messages received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxMsgsNAKed 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.19
This specifies the number of data messages for which NAKs were received.
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxMsgsAborted 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.20
This specifies the number of data messages to the controller for which were aborted by the controller (by sending EOT).
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxSelectsNAKed 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.21
This specifies the number of selects for which NAKs were received by the controller.
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxInvRespToSelect 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.22
This indicates the number of selects for which an invalid response was received.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxNAKRetryExhausted 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.23
This indicates the number of times the NAK received retry limit was crossed.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxENQs 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.24
This indicates the number of ENQs received.
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxENQRetryExhausted 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.25
This indicates the number of times the ENQ received retry limit was crossed.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxInterChrTimeout 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.26
This indicates the number of times intercharacter timeout occurred while receiving data from the controller .
OBJECT-TYPE    
  Counter  

iso3201SStatsRxPollTimeout 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.27
This specifies the number of times the controller did not respond to poll before response timeout .
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxSelectTimeout 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.28
This indicates the number of times the controller did not respond to select before response timeout.
OBJECT-TYPE    
  Gauge  

iso3201SStatsRxReceiveTimeout 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.29
This indicates the number of times the controller did not respond to a ACK before response timeout and the number of times the inter-character timer expired when receiving response to a NAK.
OBJECT-TYPE    
  Counter  

iso3201SStatsRxParityErrorsOnCntrl 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.30
This specifies the number of times the PAD detected a parity error on the control characters ACK, DLE, NAK, ENQ, EOT, ETX, SOH, STX.
OBJECT-TYPE    
  Gauge  

cdx6500Controls 1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER    

cdx6500Cont3201Table 1.3.6.1.4.1.449.2.1.4.11
OBJECT IDENTIFIER    

cdx6500Cont3201PortTable 1.3.6.1.4.1.449.2.1.4.11.1
This table contains the 3201 Port Control parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500Cont3201PortEntry

cdx6500Cont3201PortEntry 1.3.6.1.4.1.449.2.1.4.11.1.1
Entries in the 3201 Port control Table.
OBJECT-TYPE    
  Cdx6500Cont3201PortEntry  

iso3201PContPortNum 1.3.6.1.4.1.449.2.1.4.11.1.1.1
3201 port number .
OBJECT-TYPE    
  INTEGER 1..54  

iso3201ContPortBoot 1.3.6.1.4.1.449.2.1.4.11.1.1.2
Boots the specified 3201 port. boot : Boot the port noBoot : Do not boot the port.
OBJECT-TYPE    
  INTEGER boot(1), noBoot(2)  

iso3201ContPortEnable 1.3.6.1.4.1.449.2.1.4.11.1.1.3
Enables the specified 3201 Port. enable : Enable the Port noEnable : Do not enable the port.
OBJECT-TYPE    
  INTEGER enable(1), noEnable(2)  

iso3201ContPortDisable 1.3.6.1.4.1.449.2.1.4.11.1.1.4
Disables the specified 3201 Port. disable : Disable Port noDisable : Do not disable Port.
OBJECT-TYPE    
  INTEGER disable(1), noDisable(2)  

iso3201ContPortResetStats 1.3.6.1.4.1.449.2.1.4.11.1.1.5
Reset statistics for the specified 3201 Port reset : Reset port statistics noReset : Do not reset port statistics.
OBJECT-TYPE    
  INTEGER reset(1), noreset(2)  

cdx6500Cont3201StnTable 1.3.6.1.4.1.449.2.1.4.11.2
This table contains the 3201 Station Control parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdx6500Cont3201StnEntry

cdx6500Cont3201StnEntry 1.3.6.1.4.1.449.2.1.4.11.2.1
Entries in the 3201 Station Control Table.
OBJECT-TYPE    
  Cdx6500Cont3201StnEntry  

iso3201SContPortNum 1.3.6.1.4.1.449.2.1.4.11.2.1.1
3201 port number.
OBJECT-TYPE    
  INTEGER 1..54  

iso3201ContStnNum 1.3.6.1.4.1.449.2.1.4.11.2.1.2
3201 station number.
OBJECT-TYPE    
  INTEGER 1..16  

iso3201ContStnBoot 1.3.6.1.4.1.449.2.1.4.11.2.1.3
Boots the secified 3201 station. boot : Boot the station noBoot : Do not boot Station.
OBJECT-TYPE    
  INTEGER boot(1), noBoot(2)  

iso3201ContStnEnable 1.3.6.1.4.1.449.2.1.4.11.2.1.4
Enables the specified 3201 station enable : Enable station noEnable : Do not enable station.
OBJECT-TYPE    
  INTEGER enable(1), noEnable(2)  

iso3201ContStnDisable 1.3.6.1.4.1.449.2.1.4.11.2.1.5
Disables the specified 3201 Station disable : Disable Station noDisable : Do not disable Station.
OBJECT-TYPE    
  INTEGER disable(1), noDisable(2)  

iso3201ContStnResetStats 1.3.6.1.4.1.449.2.1.4.11.2.1.6
Reset statistics for the specified 3201 station reset : Reset station statistics noReset : Do not reset station statistics.
OBJECT-TYPE    
  INTEGER reset(1), noReset(2)  

Defined Objects

DisplayString  
OCTET STRING    

Cdx6500PPCT3201PortEntry  
SEQUENCE    
  INTEGER as iso3201PCfgPortNum  
  INTEGER as iso3201PCfgPortType  
  INTEGER as iso3201PCfgPortSpeed  
  INTEGER as iso3201PCfgNoOfControllers  
  INTEGER as iso3201PCfgResponseTimeout  
  INTEGER as iso3201PCfgInterChrTimeout  
  INTEGER as iso3201PCfgNoOfRetries  
  INTEGER as iso3201PCfgNoOfConsecRetries  
  INTEGER as iso3201PCfgSlowPollWaitCycle  
  INTEGER as iso3201PCfgElectricalInterfaceType  
  INTEGER as iso3201PCfgV24ElectricalInterfaceOption  
  INTEGER as iso3201PCfgHighSpeedElectricalInterfaceOption  

Cdx6500SPCT3201StnEntry  
SEQUENCE    
  INTEGER as iso3201SCfgPortNum  
  INTEGER as iso3201SCfgStnNum  
  DisplayString as iso3201SCfgControllerAddress  
  DisplayString as iso3201SCfgAutocallMnemonic  
  INTEGER as iso3201SCfgAutocallTimeout  
  INTEGER as iso3201SCfgMaxNoAutocallAttempts  
  DisplayString as iso3201SCfgX25Address  
  INTEGER as iso3201SCfgBillingRecords  

Cdx6500PPST3201PStatsEntry  
SEQUENCE    
  INTEGER as iso3201PStatsPortNum  
  INTEGER as iso3201PStatsPortStatus  
  INTEGER as iso3201PStatsPortType  
  INTEGER as iso3201PStatsPortSpeed  
  INTEGER as iso3201PStatsPortUtilIn  
  INTEGER as iso3201PStatsPortUtilOut  
  INTEGER as iso3201PStatsLineStatus  
  Counter as iso3201PStatsTxChrs  
  Counter as iso3201PStatsTxMsgs  
  Counter as iso3201PStatsTxPolls  
  Counter as iso3201PStatsTxSelects  
  Counter as iso3201PStatsTxACKs  
  Counter as iso3201PStatsTxNAKs  
  Counter as iso3201PStatsTxENQs  
  Counter as iso3201PStatsRxChrs  
  Counter as iso3201PStatsRxMsgs  
  Counter as iso3201PStatsRxACKs  
  Counter as iso3201PStatsRxNAKs  
  Counter as iso3201PStatsRxENQs  

Cdx6500SPST3201StnEntry  
SEQUENCE    
  INTEGER as iso3201SStatsPortNum  
  INTEGER as iso3201SStatsStnNum  
  DisplayString as iso3201SStatsControllerAddress  
  INTEGER as iso3201SStatsStnState  
  INTEGER as iso3201SStatsCurrentStatus  
  Gauge as iso3201SStatsNoOfAutocallAttmpts  
  INTEGER as iso3201SStatsNxtAutocallAttmpt  
  DisplayString as iso3201SStatsLastClearCauseCode  
  DisplayString as iso3201SStatsLastClearDiagCode  
  DisplayString as iso3201SStatsLastInCalledAddress  
  DisplayString as iso3201SStatsLastInCallingAddress  
  DisplayString as iso3201SStatsLastInCallFacilities  
  DisplayString as iso3201SStatsLastInCallCUD  
  DisplayString as iso3201SStatsLastOutCalledAddress  
  DisplayString as iso3201SStatsLastOutCallingAddress  
  DisplayString as iso3201SStatsLastOutCallFacilities  
  DisplayString as iso3201SStatsLastOutCallCUD  

Cdx6500SPST3201PktSummEntry  
SEQUENCE    
  INTEGER as iso3201SStatsPktSummPortNum  
  INTEGER as iso3201SStatsPktSummStnNum  
  Counter as iso3201SStatsTxData  
  Counter as iso3201SStatsTxCallRequest  
  Counter as iso3201SStatsTxCallAccept  
  Counter as iso3201SStatsTxClearRequest  
  Counter as iso3201SStatsTxClearConfirm  
  Counter as iso3201SStatsTxResetRequest  
  Counter as iso3201SStatsTxResetConfirm  
  Gauge as iso3201SStatsTxWindowClosed  
  Counter as iso3201SStatsRxData  
  Counter as iso3201SStatsRxCallRequest  
  Counter as iso3201SStatsRxCallAccept  
  Counter as iso3201SStatsRxClearRequest  
  Counter as iso3201SStatsRxClearConfirm  
  Counter as iso3201SStatsRxResetRequest  
  Counter as iso3201SStatsRxResetConfirm  
  Gauge as iso3201SStatsRxWindowClosed  

Cdx6500SPST3201SummEntry  
SEQUENCE    
  INTEGER as iso3201SStatsSummPortNum  
  INTEGER as iso3201SStatsSummStnNum  
  Counter as iso3201SStatsTxPolls  
  Counter as iso3201SStatsTxSelects  
  Counter as iso3201SStatsTxDataBytes  
  Gauge as iso3201SStatsTxDataMsgs  
  Counter as iso3201SStatsTxDataMsgsPerHour  
  Counter as iso3201SStatsTxAvgMsgLength  
  Gauge as iso3201SStatsTxMsgsNAKed  
  Counter as iso3201SStatsTxSelectRetryExhausted  
  Counter as iso3201SStatsTxNAKRetryExhausted  
  Gauge as iso3201SStatsTxENQs  
  Counter as iso3201SStatsTxENQRetryExhausted  
  Gauge as iso3201SStatsTxPollingSuspendedByHost  
  Counter as iso3201SStatsRxDataBytes  
  Gauge as iso3201SStatsRxDataMsgs  
  Counter as iso3201SStatsRxDataMsgsPerHour  
  Counter as iso3201SStatsRxAvgMsgLength  
  Gauge as iso3201SStatsRxMsgsNAKed  
  Gauge as iso3201SStatsRxMsgsAborted  
  Gauge as iso3201SStatsRxSelectsNAKed  
  Counter as iso3201SStatsRxInvRespToSelect  
  Counter as iso3201SStatsRxNAKRetryExhausted  
  Gauge as iso3201SStatsRxENQs  
  Counter as iso3201SStatsRxENQRetryExhausted  
  Counter as iso3201SStatsRxInterChrTimeout  
  Gauge as iso3201SStatsRxPollTimeout  
  Gauge as iso3201SStatsRxSelectTimeout  
  Counter as iso3201SStatsRxReceiveTimeout  
  Gauge as iso3201SStatsRxParityErrorsOnCntrl  

Cdx6500Cont3201PortEntry  
SEQUENCE    
  INTEGER as iso3201PContPortNum  
  INTEGER as iso3201ContPortBoot  
  INTEGER as iso3201ContPortEnable  
  INTEGER as iso3201ContPortDisable  
  INTEGER as iso3201ContPortResetStats  

Cdx6500Cont3201StnEntry  
SEQUENCE    
  INTEGER as iso3201SContPortNum  
  INTEGER as iso3201ContStnNum  
  INTEGER as iso3201ContStnBoot  
  INTEGER as iso3201ContStnEnable  
  INTEGER as iso3201ContStnDisable  
  INTEGER as iso3201ContStnResetStats