ITOUCH-CHASSIS-MIB

File: ITOUCH-CHASSIS-MIB.mib (67151 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB BRIDGE-MIB
RFC-1212 ITOUCH-MIB

Imported symbols

Counter Gauge IpAddress
DisplayString MacAddress OBJECT-TYPE
iTouch AddressType HardwareType
IOType

Defined Objects

xChassis 1.3.6.1.4.1.33.16
OBJECT IDENTIFIER    

xChassisBasic 1.3.6.1.4.1.33.16.1
OBJECT IDENTIFIER    

basicBase802Address 1.3.6.1.4.1.33.16.1.1
Base IEEE 802 global address for the chassis.
OBJECT-TYPE    
  MacAddress  

basicSlot 1.3.6.1.4.1.33.16.1.2
Chassis slot number (slotIndex) of the system whose agent is supplying this MIB.
OBJECT-TYPE    
  INTEGER  

basicSlotNumber 1.3.6.1.4.1.33.16.1.3
Number of slots in the chassis.
OBJECT-TYPE    
  INTEGER  

basicNewBase802Address 1.3.6.1.4.1.33.16.1.4
New base IEEE 802 global address for the chassis. Must be set in conjunction with featType 'changeEthernetAddress' and featKey from the ITouch System MIB.
OBJECT-TYPE    
  MacAddress  

xSegment 1.3.6.1.4.1.33.16.2
OBJECT IDENTIFIER    

segmentTable 1.3.6.1.4.1.33.16.2.1
A list of segment entries, one for each segment of each type on the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    SegmentEntry

segmentEntry 1.3.6.1.4.1.33.16.2.1.1
Values for a chassis segment.
OBJECT-TYPE    
  SegmentEntry  

segmentType 1.3.6.1.4.1.33.16.2.1.1.1
The segment type.
OBJECT-TYPE    
  NetworkType  

segmentIndex 1.3.6.1.4.1.33.16.2.1.1.2
An index value that uniquely identifies a segment.
OBJECT-TYPE    
  Letter  

xPort 1.3.6.1.4.1.33.16.3
OBJECT IDENTIFIER    

portIOCardType 1.3.6.1.4.1.33.16.3.1
The hardware type of the I/O card in this slot.
OBJECT-TYPE    
  IOType  

portIOCardSerialNumber 1.3.6.1.4.1.33.16.3.2
The ITouch serial number of the I/O card in this slot.
OBJECT-TYPE    
  SerialNumber  

portIOCardOperStatus 1.3.6.1.4.1.33.16.3.3
Status of the I/O card relative to the function card in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), mismatch(2), good(3)  

portTable 1.3.6.1.4.1.33.16.3.4
A list of port entries, one for each port of each type on the slots I/O card.
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.33.16.3.4.1
Values for an I/O card port.
OBJECT-TYPE    
  PortEntry  

portType 1.3.6.1.4.1.33.16.3.4.1.1
The port type.
OBJECT-TYPE    
  NetworkType  

portIndex 1.3.6.1.4.1.33.16.3.4.1.2
An index value that uniquely identifies a port.
OBJECT-TYPE    
  INTEGER  

xController 1.3.6.1.4.1.33.16.4
OBJECT IDENTIFIER    

controllerTable 1.3.6.1.4.1.33.16.4.1
A list of controller entries, one for each controller of each type on the local system.
OBJECT-TYPE    
  SEQUENCE OF  
    ControllerEntry

controllerEntry 1.3.6.1.4.1.33.16.4.1.1
Values for a controller.
OBJECT-TYPE    
  ControllerEntry  

controllerType 1.3.6.1.4.1.33.16.4.1.1.1
The controller type.
OBJECT-TYPE    
  NetworkType  

controllerIndex 1.3.6.1.4.1.33.16.4.1.1.2
An index value that uniquely identifies a controller.
OBJECT-TYPE    
  INTEGER  

controllerNetwork 1.3.6.1.4.1.33.16.4.1.1.3
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, portType or controllerType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xInterface 1.3.6.1.4.1.33.16.5
OBJECT IDENTIFIER    

interfaceTable 1.3.6.1.4.1.33.16.5.1
A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest numbered interfaces on the system.
OBJECT-TYPE    
  SEQUENCE OF  
    InterfaceEntry

interfaceEntry 1.3.6.1.4.1.33.16.5.1.1
Values for an interface.
OBJECT-TYPE    
  InterfaceEntry  

interfaceIndex 1.3.6.1.4.1.33.16.5.1.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

interfaceNetwork 1.3.6.1.4.1.33.16.5.1.1.2
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, portType, or controllerType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xSlotBootControl 1.3.6.1.4.1.33.16.6
OBJECT IDENTIFIER    

slotBootControlTable 1.3.6.1.4.1.33.16.6.1
A list of slot boot control entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlEntry

slotBootControlEntry 1.3.6.1.4.1.33.16.6.1.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotBootControlEntry  

slotBootControlSlot 1.3.6.1.4.1.33.16.6.1.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlIndex 1.3.6.1.4.1.33.16.6.1.1.2
An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot.
OBJECT-TYPE    
  INTEGER  

slotBootControlStatus 1.3.6.1.4.1.33.16.6.1.1.3
The status of the entry. Set to 'disabled' to disable the entry.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlController 1.3.6.1.4.1.33.16.6.1.1.4
The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType. This entry must be compatible with slotBootControlNetwork, including being of the same network type. The value 0.0 indicates default action.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootControlNetwork 1.3.6.1.4.1.33.16.6.1.1.5
The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentType or portType. This entry must be compatible with slotBootControlController, including being of the same network type. The value 0.0 indicates default action.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootControlMopFile 1.3.6.1.4.1.33.16.6.1.1.6
The software file name to request for down-line load of the server via MOP or XMOP.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

slotBootControlInternetFile 1.3.6.1.4.1.33.16.6.1.1.7
The filename to request when loading an image via TFTP.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

slotBootControlInternetAddress 1.3.6.1.4.1.33.16.6.1.1.8
The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetServer 1.3.6.1.4.1.33.16.6.1.1.9
The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetGateway 1.3.6.1.4.1.33.16.6.1.1.10
The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetDelimiter 1.3.6.1.4.1.33.16.6.1.1.11
The character separating the load file directory name from the file name.
OBJECT-TYPE    
  DisplayString SIZE(0..1)  

slotBootControlFlagTable 1.3.6.1.4.1.33.16.6.2
A list of slot boot control source flag entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlFlagEntry

slotBootControlFlagEntry 1.3.6.1.4.1.33.16.6.2.1
Values for a boot control flag.
OBJECT-TYPE    
  SlotBootControlFlagEntry  

slotBootControlFlagLoadBootpTftp 1.3.6.1.4.1.33.16.6.2.1.1
Control for performing load over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamBootpTftp 1.3.6.1.4.1.33.16.6.2.1.2
Control for performing parameter load over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpBootpTftp 1.3.6.1.4.1.33.16.6.2.1.3
Control for performing dump over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadTftpDirect 1.3.6.1.4.1.33.16.6.2.1.4
Control for performing load over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamTftpDirect 1.3.6.1.4.1.33.16.6.2.1.5
Control for performing parameter load over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpTftpDirect 1.3.6.1.4.1.33.16.6.2.1.6
Control for performing dump over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadLocal 1.3.6.1.4.1.33.16.6.2.1.7
Control for performing load from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamLocal 1.3.6.1.4.1.33.16.6.2.1.8
Control for performing parameter load from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpLocal 1.3.6.1.4.1.33.16.6.2.1.9
Control for performing dump from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadMop 1.3.6.1.4.1.33.16.6.2.1.10
Control for performing load over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamMop 1.3.6.1.4.1.33.16.6.2.1.11
Control for performing parameter load over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpMop 1.3.6.1.4.1.33.16.6.2.1.12
Control for performing dump over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadXmop 1.3.6.1.4.1.33.16.6.2.1.13
Control for performing load over ITouch extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamXmop 1.3.6.1.4.1.33.16.6.2.1.14
Control for performing parameter load over ITouch extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpXmop 1.3.6.1.4.1.33.16.6.2.1.15
Control for performing dump over ITouch extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadRarpTftp 1.3.6.1.4.1.33.16.6.2.1.16
Control for performing load over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamRarpTftp 1.3.6.1.4.1.33.16.6.2.1.17
Control for performing parameter load over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpRarpTftp 1.3.6.1.4.1.33.16.6.2.1.18
Control for performing dump over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlStorageTable 1.3.6.1.4.1.33.16.6.3
A list of slot boot control Storage entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlStorageEntry

slotBootControlStorageEntry 1.3.6.1.4.1.33.16.6.3.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotBootControlStorageEntry  

slotBootControlStorageClientSlot 1.3.6.1.4.1.33.16.6.3.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlStorageServerSlot 1.3.6.1.4.1.33.16.6.3.1.2
An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlStorageStatus 1.3.6.1.4.1.33.16.6.3.1.3
The status of the entry.
OBJECT-TYPE    
  INTEGER present(1), failed(2), ok(3), notpresent(4)  

slotBootControlStorageFailures 1.3.6.1.4.1.33.16.6.3.1.4
The number of times a read from or write to a given Storage location failed
OBJECT-TYPE    
  Counter  

xSlot 1.3.6.1.4.1.33.16.7
OBJECT IDENTIFIER    

slotTable 1.3.6.1.4.1.33.16.7.1
A list of slot entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotEntry

slotEntry 1.3.6.1.4.1.33.16.7.1.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotEntry  

slotIndex 1.3.6.1.4.1.33.16.7.1.1.1
An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found at instance zero are duplicates, that instance does not appear in responses a get-next, that is, the lowest numbered slotIndex returned by get-next is 1.
OBJECT-TYPE    
  INTEGER  

slotAdminAction 1.3.6.1.4.1.33.16.7.1.1.2
Control to cause reset of the system in a slot. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of slotOperStatus.
OBJECT-TYPE    
  INTEGER ready(1), reset(2), resetHold(3)  

slotOperStatus 1.3.6.1.4.1.33.16.7.1.1.3
Relative to the chassis, the current operating status of the system in the slot.
OBJECT-TYPE    
  INTEGER loadRequested(1), loading(2), dumpRequested(3), dumping(4), paramRequested(5), paramLoading(6), running(7), initializing(8), attended(9), internal10(10), internal11(11), inhibited(12), maxserverCard(13), invalidConfigStorage(14), securityLockdown(15), resetHold(64), selfTest(65), notResponding(66), broken(67), unknown(68), notApplicable(69)  

slotSecondsSinceReset 1.3.6.1.4.1.33.16.7.1.1.4
The number of seconds since the system in the slot was last reset by hardware or software.
OBJECT-TYPE    
  Gauge  

slotHardwareType 1.3.6.1.4.1.33.16.7.1.1.5
The type of hardware in the slot.
OBJECT-TYPE    
  HardwareType  

slotHardwareSerialNumber 1.3.6.1.4.1.33.16.7.1.1.6
The ITouch serial number of the function card hardware in this slot.
OBJECT-TYPE    
  SerialNumber  

slotHardwareRevision 1.3.6.1.4.1.33.16.7.1.1.7
This revision level of the function card hardware in the slot.
OBJECT-TYPE    
  INTEGER  

slotIOCardType 1.3.6.1.4.1.33.16.7.1.1.8
The hardware type of the I/O card in this slot.
OBJECT-TYPE    
  IOType  

slotIOCardSerialNumber 1.3.6.1.4.1.33.16.7.1.1.9
The ITouch serial number of the I/O card in this slot.
OBJECT-TYPE    
  SerialNumber  

slotIOCardOperStatus 1.3.6.1.4.1.33.16.7.1.1.10
Status of the I/O card relative to the function card in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), mismatch(2), good(3), notApplicable(4)  

slotBootstrapFirmwareRevision 1.3.6.1.4.1.33.16.7.1.1.11
The firmware revision level of the bootstrap ROM installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotElementalFirmwareRevision 1.3.6.1.4.1.33.16.7.1.1.12
The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotMemorySize 1.3.6.1.4.1.33.16.7.1.1.13
The number of bytes of memory installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotLedNumber 1.3.6.1.4.1.33.16.7.1.1.14
The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable.
OBJECT-TYPE    
  Gauge  

slotLedStatus 1.3.6.1.4.1.33.16.7.1.1.15
The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceeding to the low-order bit, then to then next byte. On the system hardware, the first LED is at the top, left, front, proceeding left to right, top to bottom, and front to back.
OBJECT-TYPE    
  OCTET STRING SIZE(0..9)  

slotBase802Address 1.3.6.1.4.1.33.16.7.1.1.16
Base IEEE 802 global address for the slot.
OBJECT-TYPE    
  MacAddress  

slotIpAddress 1.3.6.1.4.1.33.16.7.1.1.17
An internet address to which the system in this slot might respond. May be one of many.
OBJECT-TYPE    
  IpAddress  

slotPlus5Status 1.3.6.1.4.1.33.16.7.1.1.18
Status of the +5 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotPlus12Status 1.3.6.1.4.1.33.16.7.1.1.19
Status of the +12 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotMinus12Status 1.3.6.1.4.1.33.16.7.1.1.20
Status of the -12 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotPlus5Watts 1.3.6.1.4.1.33.16.7.1.1.21
Tenths of watts of +5 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotPlus12Watts 1.3.6.1.4.1.33.16.7.1.1.22
Tenths of watts of +12 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotMinus12Watts 1.3.6.1.4.1.33.16.7.1.1.23
Tenths of watts of -12 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotIOCardHardwareVersion 1.3.6.1.4.1.33.16.7.1.1.24
Version number of I/O card in the slot.
OBJECT-TYPE    
  INTEGER  

slotRestoreNVS 1.3.6.1.4.1.33.16.7.1.1.25
Setting to 'execute' causes the non-volatile parameter storage to be restored from an installed memory card. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

slotDefaultNVS 1.3.6.1.4.1.33.16.7.1.1.26
Setting to 'execute' causes non-volatile stored parameters to be reset to factory defaults. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

slotBootTable 1.3.6.1.4.1.33.16.7.2
A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dumping, paramRequested, paramLoading
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootEntry

slotBootEntry 1.3.6.1.4.1.33.16.7.2.1
Bootstrap status values for a chassis slot.
OBJECT-TYPE    
  SlotBootEntry  

slotBootIndex 1.3.6.1.4.1.33.16.7.2.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootIfIndex 1.3.6.1.4.1.33.16.7.2.1.2
An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

slotBootNetwork 1.3.6.1.4.1.33.16.7.2.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootProtocol 1.3.6.1.4.1.33.16.7.2.1.4
The protocol in use for bootstrap operation.
OBJECT-TYPE    
  INTEGER other(1), unknown(2), mop(3), xmop(4), rarpTftp(5), bootpTftp(6), tftp(7), local(8), managementBus(9)  

slotBoot802Address 1.3.6.1.4.1.33.16.7.2.1.5
IEEE 802 global address in use for bootstrap operation.
OBJECT-TYPE    
  MacAddress  

slotBootAddressType 1.3.6.1.4.1.33.16.7.2.1.6
The type of network address contained in slotBootAddress.
OBJECT-TYPE    
  AddressType  

slotBootAddress 1.3.6.1.4.1.33.16.7.2.1.7
The network address the system in the slot is using to identify itself for bootstrap operation.
OBJECT-TYPE    
  OCTET STRING SIZE(0..6)  

slotBootServerAddressType 1.3.6.1.4.1.33.16.7.2.1.8
The type of network address contained in slotBootServerAddress.
OBJECT-TYPE    
  AddressType  

slotBootServerAddress 1.3.6.1.4.1.33.16.7.2.1.9
The network address of the system supplying bootstrap services to the system in the slot.
OBJECT-TYPE    
  OCTET STRING SIZE(0..6)  

slotBootGatewayAddress 1.3.6.1.4.1.33.16.7.2.1.10
The internet address of the router in use for bootstrap operation.
OBJECT-TYPE    
  IpAddress  

slotBootFileName 1.3.6.1.4.1.33.16.7.2.1.11
The full name of the file in use for bootstrap operation.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

slotBootBlockNumber 1.3.6.1.4.1.33.16.7.2.1.12
The current block number being transferred for bootstrap operation, zero if unknown or not applicable.
OBJECT-TYPE    
  Gauge  

slotBootCrashCode 1.3.6.1.4.1.33.16.7.2.1.13
If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length.
OBJECT-TYPE    
  OCTET STRING SIZE(0..4)  

slotControllerTable 1.3.6.1.4.1.33.16.7.3
A list of controller entries, one for each controller of each type in each slot.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotControllerEntry

slotControllerEntry 1.3.6.1.4.1.33.16.7.3.1
Values for a controller.
OBJECT-TYPE    
  SlotControllerEntry  

slotControllerType 1.3.6.1.4.1.33.16.7.3.1.1
The controller type.
OBJECT-TYPE    
  NetworkType  

slotControllerIndex 1.3.6.1.4.1.33.16.7.3.1.2
An index value that uniquely identifies a controller.
OBJECT-TYPE    
  INTEGER  

slotControllerNetwork 1.3.6.1.4.1.33.16.7.3.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xPowerSupply 1.3.6.1.4.1.33.16.8
OBJECT IDENTIFIER    

powerSupplyTable 1.3.6.1.4.1.33.16.8.1
A list of power supply entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PowerSupplyEntry

powerSupplyEntry 1.3.6.1.4.1.33.16.8.1.1
Values for a chassis power supply.
OBJECT-TYPE    
  PowerSupplyEntry  

powerSupplyIndex 1.3.6.1.4.1.33.16.8.1.1.1
An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis.
OBJECT-TYPE    
  INTEGER  

powerSupplyAdminAction 1.3.6.1.4.1.33.16.8.1.1.2
Control to cause reset of the power supply. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of powerSupplyRedundancyStatus.
OBJECT-TYPE    
  INTEGER ready(1), reset(2), resetHold(3)  

powerSupplyFirmwareVersion 1.3.6.1.4.1.33.16.8.1.1.3
Version number of power supply firmware.
OBJECT-TYPE    
  INTEGER  

powerSupplyRedundancyStatus 1.3.6.1.4.1.33.16.8.1.1.4
The current redundancy status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), redundant(3), engaged(4)  

powerSupplyPlus5Status 1.3.6.1.4.1.33.16.8.1.1.5
Status of the +5 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus12Status 1.3.6.1.4.1.33.16.8.1.1.6
Status of the +12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyMinus12Status 1.3.6.1.4.1.33.16.8.1.1.7
Status of the -12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalWarningStatus 1.3.6.1.4.1.33.16.8.1.1.8
The current thermal warning status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalShutdownStatus 1.3.6.1.4.1.33.16.8.1.1.9
The current thermal shutdown status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyFanStatus 1.3.6.1.4.1.33.16.8.1.1.10
The current status of the power supply's fan.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyHardwareInhibitStatus 1.3.6.1.4.1.33.16.8.1.1.11
The current status of the power supply's hardware inhibit.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus5History 1.3.6.1.4.1.33.16.8.1.1.12
History of the +5 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus12History 1.3.6.1.4.1.33.16.8.1.1.13
History of the +12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyMinus12History 1.3.6.1.4.1.33.16.8.1.1.14
History of the -12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalWarningHistory 1.3.6.1.4.1.33.16.8.1.1.15
The thermal warning history of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalShutdownHistory 1.3.6.1.4.1.33.16.8.1.1.16
The thermal shutdown history of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyFanHistory 1.3.6.1.4.1.33.16.8.1.1.17
The status history of the power supply's fan.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyHardwareInhibitHistory 1.3.6.1.4.1.33.16.8.1.1.18
The status history of the power supply's hardware inhibit.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus5Volts 1.3.6.1.4.1.33.16.8.1.1.19
In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyPlus12Volts 1.3.6.1.4.1.33.16.8.1.1.20
In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyMinus12Volts 1.3.6.1.4.1.33.16.8.1.1.21
In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyWatts 1.3.6.1.4.1.33.16.8.1.1.22
Watts of power currently drawn from this power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyWattsMax 1.3.6.1.4.1.33.16.8.1.1.23
Maximum watts of power available from this power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyChassisWatts 1.3.6.1.4.1.33.16.8.1.1.24
Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyChassisWattsMax 1.3.6.1.4.1.33.16.8.1.1.25
Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyHardwareType 1.3.6.1.4.1.33.16.8.1.1.26
The type of power supply.
OBJECT-TYPE    
  INTEGER other(1), ps130(2), bb190(3)  

xFirmwareUpdate 1.3.6.1.4.1.33.16.9
OBJECT IDENTIFIER    

firmwareUpdateTable 1.3.6.1.4.1.33.16.9.1
Table of descriptive and status information concerning the writing of firmware to a target I/O card.
OBJECT-TYPE    
  SEQUENCE OF  
    FirmwareUpdateEntry

firmwareUpdateEntry 1.3.6.1.4.1.33.16.9.1.1
An entry in the table concerning the writing of firmware to a target I/O card.
OBJECT-TYPE    
  FirmwareUpdateEntry  

firmwareUpdateSlotIndex 1.3.6.1.4.1.33.16.9.1.1.1
This variable identifies the slot to which is to be the target of the firmware update.
OBJECT-TYPE    
  INTEGER  

firmwareUpdateDefaultFileName 1.3.6.1.4.1.33.16.9.1.1.2
This variable when read will obtain the default file name from the target.
OBJECT-TYPE    
  DisplayString  

firmwareUpdateFileName 1.3.6.1.4.1.33.16.9.1.1.3
This variable contains the name of the file to be read from the flash memory card and written to the target.
OBJECT-TYPE    
  DisplayString  

firmwareUpdateStatus 1.3.6.1.4.1.33.16.9.1.1.4
This variable is used to start the update process. The agent always 'ready' for this value. Setting this value to 'execute' causes the agent to write the file specified by firmwareUpdateFileName to be written to the taget. Setting this value to 'execute' when firmwareUpdateFileName has not been written or when firmwareUpdateState is 'writing' causes bad value to be returned.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

firmwareUpdateState 1.3.6.1.4.1.33.16.9.1.1.5
This variable indicates the current state of firmware update, 'idle' indicates that firmware update may be initiated, and 'writing' indicates that an update is in process.
OBJECT-TYPE    
  INTEGER idle(1), writing(2)  

firmwareUpdateCompletionStatus 1.3.6.1.4.1.33.16.9.1.1.6
This variable indicates the completion status of the the last firmware update attempt. 'none' indicates that no firmware update has yet been attempted.
OBJECT-TYPE    
  INTEGER none(1), success(2), noTarget(3), busError(4), badFileName(5), targetError(6), timeout(7)  

firmwareUpdateMethod 1.3.6.1.4.1.33.16.9.1.1.7
This variable indicates the method of update of the firmware update attempt.
OBJECT-TYPE    
  INTEGER card(1), local(2)  

Defined Objects

NetworkType  
INTEGER unknown(1), other(2), ethernet(3), tokenRing(4), fddi(5), wan(6), ethernetRepeater(7), tokenRingConcentrator(8), fddiConcentrator(9), atm(10), isdn(11), switchplane(12), switchedEthernet(13)    

SerialNumber  
OCTET STRING SIZE(0..6)    

Letter  
INTEGER a(1), b(2), c(3), d(4), e(5), f(6), g(7), h(8), i(9), j(10), k(11), l(12), m(13), n(14), o(15), p(16), q(17), r(18), s(19), t(20), u(21), v(22), w(23), x(24), y(25), z(26)    

SegmentEntry  
SEQUENCE    
  NetworkType as segmentType  
  Letter as segmentIndex  

PortEntry  
SEQUENCE    
  NetworkType as portType  
  INTEGER as portIndex  

ControllerEntry  
SEQUENCE    
  NetworkType as controllerType  
  INTEGER as controllerIndex  
  OBJECT IDENTIFIER as controllerNetwork  

InterfaceEntry  
SEQUENCE    
  INTEGER as interfaceIndex  
  OBJECT IDENTIFIER as interfaceNetwork  

SlotBootControlEntry  
SEQUENCE    
  INTEGER as slotBootControlSlot  
  INTEGER as slotBootControlIndex  
  INTEGER as slotBootControlStatus  
  OBJECT IDENTIFIER as slotBootControlController  
  OBJECT IDENTIFIER as slotBootControlNetwork  
  DisplayString as slotBootControlMopFile  
  DisplayString as slotBootControlInternetFile  
  IpAddress as slotBootControlInternetAddress  
  IpAddress as slotBootControlInternetServer  
  IpAddress as slotBootControlInternetGateway  
  DisplayString as slotBootControlInternetDelimiter  

SlotBootControlFlagEntry  
SEQUENCE    
  INTEGER as slotBootControlFlagLoadBootpTftp  
  INTEGER as slotBootControlFlagParamBootpTftp  
  INTEGER as slotBootControlFlagDumpBootpTftp  
  INTEGER as slotBootControlFlagLoadTftpDirect  
  INTEGER as slotBootControlFlagParamTftpDirect  
  INTEGER as slotBootControlFlagDumpTftpDirect  
  INTEGER as slotBootControlFlagLoadLocal  
  INTEGER as slotBootControlFlagParamLocal  
  INTEGER as slotBootControlFlagDumpLocal  
  INTEGER as slotBootControlFlagLoadMop  
  INTEGER as slotBootControlFlagParamMop  
  INTEGER as slotBootControlFlagDumpMop  
  INTEGER as slotBootControlFlagLoadXmop  
  INTEGER as slotBootControlFlagParamXmop  
  INTEGER as slotBootControlFlagDumpXmop  
  INTEGER as slotBootControlFlagLoadRarpTftp  
  INTEGER as slotBootControlFlagParamRarpTftp  
  INTEGER as slotBootControlFlagDumpRarpTftp  

SlotBootControlStorageEntry  
SEQUENCE    
  INTEGER as slotBootControlStorageClientSlot  
  INTEGER as slotBootControlStorageServerSlot  
  INTEGER as slotBootControlStorageStatus  
  Counter as slotBootControlStorageFailures  

SlotEntry  
SEQUENCE    
  INTEGER as slotIndex  
  INTEGER as slotAdminAction  
  INTEGER as slotOperStatus  
  Gauge as slotSecondsSinceReset  
  HardwareType as slotHardwareType  
  SerialNumber as slotHardwareSerialNumber  
  INTEGER as slotHardwareRevision  
  IOType as slotIOCardType  
  SerialNumber as slotIOCardSerialNumber  
  INTEGER as slotIOCardOperStatus  
  INTEGER as slotBootstrapFirmwareRevision  
  INTEGER as slotElementalFirmwareRevision  
  INTEGER as slotMemorySize  
  Gauge as slotLedNumber  
  OCTET STRING as slotLedStatus  
  MacAddress as slotBase802Address  
  IpAddress as slotIpAddress  
  INTEGER as slotPlus5Status  
  INTEGER as slotPlus12Status  
  INTEGER as slotMinus12Status  
  Gauge as slotPlus5Watts  
  Gauge as slotPlus12Watts  
  Gauge as slotMinus12Watts  
  INTEGER as slotIOCardHardwareVersion  
  INTEGER as slotRestoreNVS  
  INTEGER as slotDefaultNVS  

SlotBootEntry  
SEQUENCE    
  INTEGER as slotBootIndex  
  INTEGER as slotBootIfIndex  
  OBJECT IDENTIFIER as slotBootNetwork  
  INTEGER as slotBootProtocol  
  MacAddress as slotBoot802Address  
  AddressType as slotBootAddressType  
  OCTET STRING as slotBootAddress  
  AddressType as slotBootServerAddressType  
  OCTET STRING as slotBootServerAddress  
  IpAddress as slotBootGatewayAddress  
  DisplayString as slotBootFileName  
  Gauge as slotBootBlockNumber  
  OCTET STRING as slotBootCrashCode  

SlotControllerEntry  
SEQUENCE    
  NetworkType as slotControllerType  
  INTEGER as slotControllerIndex  
  OBJECT IDENTIFIER as slotControllerNetwork  

PowerSupplyEntry  
SEQUENCE    
  INTEGER as powerSupplyIndex  
  INTEGER as powerSupplyAdminAction  
  INTEGER as powerSupplyFirmwareVersion  
  INTEGER as powerSupplyRedundancyStatus  
  INTEGER as powerSupplyPlus5Status  
  INTEGER as powerSupplyPlus12Status  
  INTEGER as powerSupplyMinus12Status  
  INTEGER as powerSupplyThermalWarningStatus  
  INTEGER as powerSupplyThermalShutdownStatus  
  INTEGER as powerSupplyFanStatus  
  INTEGER as powerSupplyHardwareInhibitStatus  
  INTEGER as powerSupplyPlus5History  
  INTEGER as powerSupplyPlus12History  
  INTEGER as powerSupplyMinus12History  
  INTEGER as powerSupplyThermalWarningHistory  
  INTEGER as powerSupplyThermalShutdownHistory  
  INTEGER as powerSupplyFanHistory  
  INTEGER as powerSupplyHardwareInhibitHistory  
  Gauge as powerSupplyPlus5Volts  
  Gauge as powerSupplyPlus12Volts  
  Gauge as powerSupplyMinus12Volts  
  Gauge as powerSupplyWatts  
  Gauge as powerSupplyWattsMax  
  Gauge as powerSupplyChassisWatts  
  Gauge as powerSupplyChassisWattsMax  
  INTEGER as powerSupplyHardwareType  

FirmwareUpdateEntry  
SEQUENCE    
  INTEGER as firmwareUpdateSlotIndex  
  DisplayString as firmwareUpdateDefaultFileName  
  DisplayString as firmwareUpdateFileName  
  INTEGER as firmwareUpdateStatus  
  INTEGER as firmwareUpdateState  
  INTEGER as firmwareUpdateCompletionStatus  
  INTEGER as firmwareUpdateMethod