ITOUCH-DECNET-MIB

File: ITOUCH-DECNET-MIB.mib (31743 bytes)

Imported modules

RFC1155-SMI RFC1289-phivMIB ITOUCH-MIB
RFC-1212

Imported symbols

Counter PhivAddr iTouch
DateTime OBJECT-TYPE

Defined Objects

xDecnet 1.3.6.1.4.1.33.14
OBJECT IDENTIFIER    

xRcp 1.3.6.1.4.1.33.14.1
OBJECT IDENTIFIER    

rcpRemoteAddress 1.3.6.1.4.1.33.14.1.1
If a remote console session exists, the Ethernet address of the remote partner, otherwise zero length.
OBJECT-TYPE    
  OCTET STRING SIZE(0..6)  

xPhiv 1.3.6.1.4.1.33.14.2
OBJECT IDENTIFIER    

xPhivRoute 1.3.6.1.4.1.33.14.2.1
OBJECT IDENTIFIER    

phivPathSelection 1.3.6.1.4.1.33.14.2.1.1
The algorithm used to balance traffic between equal next hop paths. 'roundRobin' selects the next hop using a round robin algorithm for each hop. 'samePath' selects the next hop guaranteeing that all packets with the same source/destination pair will always use the same next hop.
OBJECT-TYPE    
  INTEGER roundRobin(1), samePath(2)  

phivMaxPaths 1.3.6.1.4.1.33.14.2.1.2
The maximum number of equal cost next hops that the router can remember and successfully load balance between.
OBJECT-TYPE    
  INTEGER 1..255  

phivStatus 1.3.6.1.4.1.33.14.2.1.3
The status of the DECnet routing software.
OBJECT-TYPE    
  INTEGER active(1), disabled(2), noAddressSpecified(3), noInterfacesEnabled(4), badCost(5)  

xPhivCircuit 1.3.6.1.4.1.33.14.2.2
OBJECT IDENTIFIER    

phivCircuitTable 1.3.6.1.4.1.33.14.2.2.1
A list of DECnet circuit entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitEntry

phivCircuitEntry 1.3.6.1.4.1.33.14.2.2.1.1
Parameter values for a DECnet circuit.
OBJECT-TYPE    
  PhivCircuitEntry  

xPhivCircuitIndex 1.3.6.1.4.1.33.14.2.2.1.1.1
Identification of a circuit entry. Same as an interface index (ifIndex).
OBJECT-TYPE    
  INTEGER  

phivCircuitRoutingTimer 1.3.6.1.4.1.33.14.2.2.1.1.2
The maximum time in seconds allowed between Routing updates on the circuit. Different values for LANs vs. WANs.
OBJECT-TYPE    
  INTEGER 1..65535  

phivCircuitOperCost 1.3.6.1.4.1.33.14.2.2.1.1.3
The actual cost associated with the circuit.
OBJECT-TYPE    
  INTEGER  

phivCircuitErrors 1.3.6.1.4.1.33.14.2.2.1.1.4
The number of routed DECnet packets received in error on this circuit.
OBJECT-TYPE    
  Counter  

phivCircuitLastError 1.3.6.1.4.1.33.14.2.2.1.1.5
The error of the last routed DECnet packet received in error on this circuit.
OBJECT-TYPE    
  INTEGER noError(1), addressOutOfRange(2), ageExceeded(3), destinationUnreachable(4), packetFormatError(5), packetOversized(6), partialRoutingUpdate(7), verificationReject(8)  

phivCircuitLastErrorTime 1.3.6.1.4.1.33.14.2.2.1.1.6
The date and time that the last routed DECnet packet was received in error on this circuit.
OBJECT-TYPE    
  DateTime  

phivCircuitLastErrorData 1.3.6.1.4.1.33.14.2.2.1.1.7
The first 22 bytes of the last routed DECnet packet received in error on this circuit.
OBJECT-TYPE    
  OCTET STRING SIZE(22)  

phivCircuitProtocolPriority 1.3.6.1.4.1.33.14.2.2.1.1.8
The priority at which all DECnet routed packets will be placed on the WAN output queue.
OBJECT-TYPE    
  INTEGER low(1), medium(3), high(5)  

phivCircuitRoutingPriority 1.3.6.1.4.1.33.14.2.2.1.1.9
Router's priority to be designated router on this circuit.
OBJECT-TYPE    
  INTEGER 0..127  

xPhivImport 1.3.6.1.4.1.33.14.2.3
OBJECT IDENTIFIER    

phivCircuitImportTable 1.3.6.1.4.1.33.14.2.3.1
A list of circuit import filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitImportEntry

phivCircuitImportEntry 1.3.6.1.4.1.33.14.2.3.1.1
Parameter values for an import filter.
OBJECT-TYPE    
  PhivCircuitImportEntry  

phivCircuitImportIf 1.3.6.1.4.1.33.14.2.3.1.1.1
The interface associated with the import routing filter.
OBJECT-TYPE    
  INTEGER  

phivCircuitImportAddr 1.3.6.1.4.1.33.14.2.3.1.1.2
The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.
OBJECT-TYPE    
  PhivAddr  

phivCircuitImportMask 1.3.6.1.4.1.33.14.2.3.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
OBJECT-TYPE    
  PhivAddr  

phivCircuitImportAction 1.3.6.1.4.1.33.14.2.3.1.1.4
The action to take if the address field along with the mask field matches the route entry.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

phivCircuitImportStatus 1.3.6.1.4.1.33.14.2.3.1.1.5
Setting to 'invalid' removes this import filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivImportArea 1.3.6.1.4.1.33.14.2.4
OBJECT IDENTIFIER    

phivCircuitImportAreaTable 1.3.6.1.4.1.33.14.2.4.1
A list of circuit import area filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitImportAreaEntry

phivCircuitImportAreaEntry 1.3.6.1.4.1.33.14.2.4.1.1
Parameter values for an import area filter.
OBJECT-TYPE    
  PhivCircuitImportAreaEntry  

phivCircuitImportAreaIf 1.3.6.1.4.1.33.14.2.4.1.1.1
The interface associated with the import area routing filter.
OBJECT-TYPE    
  INTEGER  

phivCircuitImportAreaAddr 1.3.6.1.4.1.33.14.2.4.1.1.2
The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.
OBJECT-TYPE    
  PhivAddr  

phivCircuitImportAreaMask 1.3.6.1.4.1.33.14.2.4.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
OBJECT-TYPE    
  PhivAddr  

phivCircuitImportAreaAction 1.3.6.1.4.1.33.14.2.4.1.1.4
The action to take if the address field along with the mask field matches the route entry.
OBJECT-TYPE    
  INTEGER discard(1), accept(2)  

phivCircuitImportAreaStatus 1.3.6.1.4.1.33.14.2.4.1.1.5
Setting to 'invalid' removes this import area filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivExport 1.3.6.1.4.1.33.14.2.5
OBJECT IDENTIFIER    

phivCircuitExportTable 1.3.6.1.4.1.33.14.2.5.1
A list of circuit export filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitExportEntry

phivCircuitExportEntry 1.3.6.1.4.1.33.14.2.5.1.1
Parameter values for an export filter.
OBJECT-TYPE    
  PhivCircuitExportEntry  

phivCircuitExportIf 1.3.6.1.4.1.33.14.2.5.1.1.1
The interface associated with the export routing filter.
OBJECT-TYPE    
  INTEGER  

phivCircuitExportAddr 1.3.6.1.4.1.33.14.2.5.1.1.2
The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.
OBJECT-TYPE    
  PhivAddr  

phivCircuitExportMask 1.3.6.1.4.1.33.14.2.5.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
OBJECT-TYPE    
  PhivAddr  

phivCircuitExportAction 1.3.6.1.4.1.33.14.2.5.1.1.4
The action to take if the address field along with the mask field matches the route entry.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

phivCircuitExportStatus 1.3.6.1.4.1.33.14.2.5.1.1.5
Setting to 'invalid' removes this export filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivExportArea 1.3.6.1.4.1.33.14.2.6
OBJECT IDENTIFIER    

phivCircuitExportAreaTable 1.3.6.1.4.1.33.14.2.6.1
A list of circuit export area filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitExportAreaEntry

phivCircuitExportAreaEntry 1.3.6.1.4.1.33.14.2.6.1.1
Parameter values for an export area filter.
OBJECT-TYPE    
  PhivCircuitExportAreaEntry  

phivCircuitExportAreaIf 1.3.6.1.4.1.33.14.2.6.1.1.1
The interface associated with the export area routing filter.
OBJECT-TYPE    
  INTEGER  

phivCircuitExportAreaAddr 1.3.6.1.4.1.33.14.2.6.1.1.2
The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.
OBJECT-TYPE    
  PhivAddr  

phivCircuitExportAreaMask 1.3.6.1.4.1.33.14.2.6.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
OBJECT-TYPE    
  PhivAddr  

phivCircuitExportAreaAction 1.3.6.1.4.1.33.14.2.6.1.1.4
The action to take if the address field along with the mask field matches the route entry.
OBJECT-TYPE    
  INTEGER hide(1), advertise(2)  

phivCircuitExportAreaStatus 1.3.6.1.4.1.33.14.2.6.1.1.5
Setting to 'invalid' removes this export area filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivFilter 1.3.6.1.4.1.33.14.2.7
OBJECT IDENTIFIER    

phivCircuitFilterTable 1.3.6.1.4.1.33.14.2.7.1
A list of circuit filter entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivCircuitFilterEntry

phivCircuitFilterEntry 1.3.6.1.4.1.33.14.2.7.1.1
Parameter values for a filter.
OBJECT-TYPE    
  PhivCircuitFilterEntry  

phivCircuitFilterIf 1.3.6.1.4.1.33.14.2.7.1.1.1
The interface associated with the filter entry.
OBJECT-TYPE    
  INTEGER  

phivCircuitFilterDstAddr 1.3.6.1.4.1.33.14.2.7.1.1.2
The address (node or area) to match against the destination address of the packet to decide whether to forward the packet.
OBJECT-TYPE    
  PhivAddr  

phivCircuitFilterDstMask 1.3.6.1.4.1.33.14.2.7.1.1.3
The mask which is ANDed with the destination address field and the packet's destination address to determine whether the address matches the packet's address.
OBJECT-TYPE    
  PhivAddr  

phivCircuitFilterSrcAddr 1.3.6.1.4.1.33.14.2.7.1.1.4
The address (node or area) to match against the source address of the packet to decide whether to forward the packet.
OBJECT-TYPE    
  PhivAddr  

phivCircuitFilterSrcMask 1.3.6.1.4.1.33.14.2.7.1.1.5
The mask which is ANDed with the source address field and the packet's source address to determine whether the address matches the packet's address.
OBJECT-TYPE    
  PhivAddr  

phivCircuitFilterAction 1.3.6.1.4.1.33.14.2.7.1.1.6
The action to take if the address fields along with the mask fields match the packet.
OBJECT-TYPE    
  INTEGER discard(1), forward(2)  

phivCircuitFilterStatus 1.3.6.1.4.1.33.14.2.7.1.1.7
Setting to 'invalid' removes this Filter filter from the table. Setting to 'valid' has no effect.
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

xPhivTraffic 1.3.6.1.4.1.33.14.2.8
OBJECT IDENTIFIER    

phivTrafficSort 1.3.6.1.4.1.33.14.2.8.1
Setting to 'execute' causes the most recent traffic information to be sorted into the phivTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

phivTrafficTable 1.3.6.1.4.1.33.14.2.8.2
A list of traffic entries, sorted in the order specified by phivTrafficSort.
OBJECT-TYPE    
  SEQUENCE OF  
    PhivTrafficEntry

phivTrafficEntry 1.3.6.1.4.1.33.14.2.8.2.1
A traffic entry.
OBJECT-TYPE    
  PhivTrafficEntry  

phivTrafficIndex 1.3.6.1.4.1.33.14.2.8.2.1.1
Identification of this traffic entry.
OBJECT-TYPE    
  INTEGER  

phivTrafficPercent 1.3.6.1.4.1.33.14.2.8.2.1.2
The percentage of total traffic that this traffic entry represents, in tenths of a percent.
OBJECT-TYPE    
  INTEGER 0..1000  

phivTrafficDst 1.3.6.1.4.1.33.14.2.8.2.1.3
The destination to which the traffic entry applies.
OBJECT-TYPE    
  PhivAddr  

phivTrafficSrc 1.3.6.1.4.1.33.14.2.8.2.1.4
The source to which the traffic entry applies.
OBJECT-TYPE    
  PhivAddr  

phivTrafficIf 1.3.6.1.4.1.33.14.2.8.2.1.5
The inbound interface to which the traffic entry applies. This value is the same as IfIndex.
OBJECT-TYPE    
  INTEGER  

Defined Objects

PhivCircuitEntry  
SEQUENCE    
  INTEGER as xPhivCircuitIndex  
  INTEGER as phivCircuitRoutingTimer  
  INTEGER as phivCircuitOperCost  
  Counter as phivCircuitErrors  
  INTEGER as phivCircuitLastError  
  DateTime as phivCircuitLastErrorTime  
  OCTET STRING as phivCircuitLastErrorData  
  INTEGER as phivCircuitProtocolPriority  
  INTEGER as phivCircuitRoutingPriority  

PhivCircuitImportEntry  
SEQUENCE    
  INTEGER as phivCircuitImportIf  
  PhivAddr as phivCircuitImportAddr  
  PhivAddr as phivCircuitImportMask  
  INTEGER as phivCircuitImportAction  
  INTEGER as phivCircuitImportStatus  

PhivCircuitImportAreaEntry  
SEQUENCE    
  INTEGER as phivCircuitImportAreaIf  
  PhivAddr as phivCircuitImportAreaAddr  
  PhivAddr as phivCircuitImportAreaMask  
  INTEGER as phivCircuitImportAreaAction  
  INTEGER as phivCircuitImportAreaStatus  

PhivCircuitExportEntry  
SEQUENCE    
  INTEGER as phivCircuitExportIf  
  PhivAddr as phivCircuitExportAddr  
  PhivAddr as phivCircuitExportMask  
  INTEGER as phivCircuitExportAction  
  INTEGER as phivCircuitExportStatus  

PhivCircuitExportAreaEntry  
SEQUENCE    
  INTEGER as phivCircuitExportAreaIf  
  PhivAddr as phivCircuitExportAreaAddr  
  PhivAddr as phivCircuitExportAreaMask  
  INTEGER as phivCircuitExportAreaAction  
  INTEGER as phivCircuitExportAreaStatus  

PhivCircuitFilterEntry  
SEQUENCE    
  INTEGER as phivCircuitFilterIf  
  PhivAddr as phivCircuitFilterDstAddr  
  PhivAddr as phivCircuitFilterDstMask  
  PhivAddr as phivCircuitFilterSrcAddr  
  PhivAddr as phivCircuitFilterSrcMask  
  INTEGER as phivCircuitFilterAction  
  INTEGER as phivCircuitFilterStatus  

PhivTrafficEntry  
SEQUENCE    
  INTEGER as phivTrafficIndex  
  INTEGER as phivTrafficPercent  
  PhivAddr as phivTrafficDst  
  PhivAddr as phivTrafficSrc  
  INTEGER as phivTrafficIf