JNX-IPSEC-MONITOR-MIB

File: JNX-IPSEC-MONITOR-MIB.mib (37306 bytes)

Imported modules

SNMPv2-SMI INET-ADDRESS-MIB SNMPv2-TC
JUNIPER-SMI JUNIPER-SP-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Counter64 Integer32 Unsigned32
InetAddress InetAddressType TEXTUAL-CONVENTION
DisplayString TimeInterval jnxMibs
jnxSpSvcSetName

Defined Objects

jnxIpSecMonitorMIB 1.3.6.1.4.1.2636.3.22
MODULE-IDENTITY    

jnxIpSecMIBObjects 1.3.6.1.4.1.2636.3.22.1
OBJECT IDENTIFIER    

jnxIpSecLevels 1.3.6.1.4.1.2636.3.22.1.1
OBJECT IDENTIFIER    

jnxIpSecMibLevel 1.3.6.1.4.1.2636.3.22.1.1.1
The version of the IPsec MIB.
OBJECT-TYPE    
  Integer32 1..4096  

jnxIpSecPhaseOne 1.3.6.1.4.1.2636.3.22.1.2
OBJECT IDENTIFIER    

jnxIkeTunnelTable 1.3.6.1.4.1.2636.3.22.1.2.1
The IPsec Phase-1 Internet Key Exchange Tunnel Table. There is one entry in this table for each active IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxIkeTunnelEntry

jnxIkeTunnelEntry 1.3.6.1.4.1.2636.3.22.1.2.1.1
Each entry contains the attributes associated with an active IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  JnxIkeTunnelEntry  

jnxIkeTunIndex 1.3.6.1.4.1.2636.3.22.1.2.1.1.1
The index of the IPsec Phase-1 IKE Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

jnxIkeTunLocalRole 1.3.6.1.4.1.2636.3.22.1.2.1.1.2
The role of local peer identity. The Role of the local peer can be: 1. initiator. 2. or responder.
OBJECT-TYPE    
  JnxIkePeerRole  

jnxIkeTunNegState 1.3.6.1.4.1.2636.3.22.1.2.1.1.3
The state of the current negotiation , It can be 1. matured 2. not matured
OBJECT-TYPE    
  JnxIkeNegState  

jnxIkeTunInitiatorCookie 1.3.6.1.4.1.2636.3.22.1.2.1.1.4
Cookie as generated by the peer that initiated the IKE Phase-1 negotiation. This cookie is carried in the ISAKMP header.
OBJECT-TYPE    
  DisplayString  

jnxIkeTunResponderCookie 1.3.6.1.4.1.2636.3.22.1.2.1.1.5
Cookie as generated by the peer responding to the IKE Phase-1 negotiation initiated by the remote peer. This cookie is carried in the ISAKMP header.
OBJECT-TYPE    
  DisplayString  

jnxIkeTunLocalIdType 1.3.6.1.4.1.2636.3.22.1.2.1.1.6
The type of local peer identity. The local peer may be identified by: 1. an IP address, or 2. or a fully qualified domain name string. 3. or a distinguished name string.
OBJECT-TYPE    
  JnxIkePeerType  

jnxIkeTunLocalIdValue 1.3.6.1.4.1.2636.3.22.1.2.1.1.7
The value of the local peer identity. If the local peer type is an IP Address, then this is the IP Address used to identify the local peer. If the local peer type is id_fqdn, then this is the FQDN of the remote peer. If the local peer type is a id_dn, then this is the distinguished name string of the local peer.
OBJECT-TYPE    
  DisplayString  

jnxIkeTunLocalGwAddrType 1.3.6.1.4.1.2636.3.22.1.2.1.1.8
The IP address type of the local endpoint (gateway) for the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  InetAddressType  

jnxIkeTunLocalGwAddr 1.3.6.1.4.1.2636.3.22.1.2.1.1.9
The IP address of the local endpoint (gateway) for the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  InetAddress  

jnxIkeTunLocalCertName 1.3.6.1.4.1.2636.3.22.1.2.1.1.10
Name of the certificate used for authentication of the local tunnel endpoint. This object will have some valid value only if negotiated IKE authentication method is other than pre-saherd key. If the IKE negotiation do not use certificate based authentication method, then the value of this object will be a NULL string.
OBJECT-TYPE    
  DisplayString  

jnxIkeTunRemoteIdType 1.3.6.1.4.1.2636.3.22.1.2.1.1.11
The type of remote peer identity. The remote peer may be identified by: 1. an IP address, or 2. or a fully qualified domain name string. 3. or a distinguished name string.
OBJECT-TYPE    
  JnxIkePeerType  

jnxIkeTunRemoteIdValue 1.3.6.1.4.1.2636.3.22.1.2.1.1.12
The value of the remote peer identity. If the remote peer type is an IP Address, then this is the IP Address used to identify the remote peer. If the remote peer type is id_fqdn, then this is the FQDN of the remote peer. If the remote peer type is a id_dn, then this is the distinguished named string of the remote peer.
OBJECT-TYPE    
  DisplayString  

jnxIkeTunRemoteGwAddrType 1.3.6.1.4.1.2636.3.22.1.2.1.1.13
The IP address type of the remote gateway (endpoint) for the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  InetAddressType  

jnxIkeTunRemoteGwAddr 1.3.6.1.4.1.2636.3.22.1.2.1.1.14
The IP address of the remote gateway (endpoint) for the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  InetAddress  

jnxIkeTunNegoMode 1.3.6.1.4.1.2636.3.22.1.2.1.1.15
The negotiation mode of the IPsec Phase-1 IKE Tunnel.
OBJECT-TYPE    
  JnxIkeNegoMode  

jnxIkeTunDiffHellmanGrp 1.3.6.1.4.1.2636.3.22.1.2.1.1.16
The Diffie Hellman Group used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  JnxDiffHellmanGrp  

jnxIkeTunEncryptAlgo 1.3.6.1.4.1.2636.3.22.1.2.1.1.17
The encryption algorithm used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  JnxEncryptAlgo  

jnxIkeTunHashAlgo 1.3.6.1.4.1.2636.3.22.1.2.1.1.18
The hash algorithm used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  JnxIkeHashAlgo  

jnxIkeTunAuthMethod 1.3.6.1.4.1.2636.3.22.1.2.1.1.19
The authentication method used in IPsec Phase-1 IKE negotiations.
OBJECT-TYPE    
  JnxIkeAuthMethod  

jnxIkeTunLifeTime 1.3.6.1.4.1.2636.3.22.1.2.1.1.20
The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds.
OBJECT-TYPE    
  Integer32 1..2147483647  

jnxIkeTunActiveTime 1.3.6.1.4.1.2636.3.22.1.2.1.1.21
The length of time the IPsec Phase-1 IKE tunnel has been active in hundredths of seconds.
OBJECT-TYPE    
  TimeInterval  

jnxIkeTunInOctets 1.3.6.1.4.1.2636.3.22.1.2.1.1.22
The total number of octets received by this IPsec Phase-1 IKE security association.
OBJECT-TYPE    
  Counter64  

jnxIkeTunInPkts 1.3.6.1.4.1.2636.3.22.1.2.1.1.23
The total number of packets received by this IPsec Phase-1 IKE security association.
OBJECT-TYPE    
  Counter32  

jnxIkeTunOutOctets 1.3.6.1.4.1.2636.3.22.1.2.1.1.24
The total number of octets sent by this IPsec Phase-1 IKE security association.
OBJECT-TYPE    
  Counter64  

jnxIkeTunOutPkts 1.3.6.1.4.1.2636.3.22.1.2.1.1.25
The total number of packets sent by this IPsec Phase-1 IKE security association.
OBJECT-TYPE    
  Counter32  

jnxIpSecPhaseTwo 1.3.6.1.4.1.2636.3.22.1.3
OBJECT IDENTIFIER    

jnxIpSecTunnelTable 1.3.6.1.4.1.2636.3.22.1.3.1
The IPsec Phase-2 Tunnel Table. There is one entry in this table for each active IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxIpSecTunnelEntry

jnxIpSecTunnelEntry 1.3.6.1.4.1.2636.3.22.1.3.1.1
Each entry contains the attributes associated with an active IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  JnxIpSecTunnelEntry  

jnxIpSecTunIndex 1.3.6.1.4.1.2636.3.22.1.3.1.1.1
The index of the IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

jnxIpSecRuleName 1.3.6.1.4.1.2636.3.22.1.3.1.1.2
Name of the rule configured in IPSec configuration.
OBJECT-TYPE    
  DisplayString  

jnxIpSecTermName 1.3.6.1.4.1.2636.3.22.1.3.1.1.3
Name of the term configured under IPSec rule.
OBJECT-TYPE    
  DisplayString  

jnxIpSecTunLocalGwAddrType 1.3.6.1.4.1.2636.3.22.1.3.1.1.4
The IP address type of the local gateway (endpoint) for the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  InetAddressType  

jnxIpSecTunLocalGwAddr 1.3.6.1.4.1.2636.3.22.1.3.1.1.5
The IP address of the local gateway (endpoint) for the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  InetAddress  

jnxIpSecTunRemoteGwAddrType 1.3.6.1.4.1.2636.3.22.1.3.1.1.6
The IP address type of the remote gateway (endpoint) for the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  InetAddressType  

jnxIpSecTunRemoteGwAddr 1.3.6.1.4.1.2636.3.22.1.3.1.1.7
The IP address of the remote gateway (endpoint) for the IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  InetAddress  

jnxIpSecTunLocalProxyId 1.3.6.1.4.1.2636.3.22.1.3.1.1.8
Identifier for the local end.
OBJECT-TYPE    
  DisplayString  

jnxIpSecTunRemoteProxyId 1.3.6.1.4.1.2636.3.22.1.3.1.1.9
Identifier for the remote end.
OBJECT-TYPE    
  DisplayString  

jnxIpSecTunKeyType 1.3.6.1.4.1.2636.3.22.1.3.1.1.10
The type of key used by the IPsec Phase-2 Tunnel. It can be one of the following two types: - IKE negotiated - Manually installed
OBJECT-TYPE    
  JnxKeyType  

jnxIpSecRemotePeerType 1.3.6.1.4.1.2636.3.22.1.3.1.1.11
The type of the remote peer gateway (endpoint). It can be one of the following two types: - static (Remote peer whose IP address is known beforehand) - dynamic (Remote peer whose IP address is not known beforehand)
OBJECT-TYPE    
  JnxRemotePeerType  

jnxIpSecTunMtu 1.3.6.1.4.1.2636.3.22.1.3.1.1.12
MTU value of this Phase-2 tunnel.
OBJECT-TYPE    
  Integer32  

jnxIpSecTunOutEncryptedBytes 1.3.6.1.4.1.2636.3.22.1.3.1.1.13
Number of bytes encrypted by this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunOutEncryptedPkts 1.3.6.1.4.1.2636.3.22.1.3.1.1.14
Number of packets encrypted by this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunInDecryptedBytes 1.3.6.1.4.1.2636.3.22.1.3.1.1.15
Number of bytes decrypted by this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunInDecryptedPkts 1.3.6.1.4.1.2636.3.22.1.3.1.1.16
Number of packets decrypted by this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpsSecTunAHInBytes 1.3.6.1.4.1.2636.3.22.1.3.1.1.17
Number of incoming bytes authenticated using AH by this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpsSecTunAHInPkts 1.3.6.1.4.1.2636.3.22.1.3.1.1.18
Number of incoming packets authenticated using AH by this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpsSecTunAHOutBytes 1.3.6.1.4.1.2636.3.22.1.3.1.1.19
Number of outgoing bytes applied AH by this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpsSecTunAHOutPkts 1.3.6.1.4.1.2636.3.22.1.3.1.1.20
Number of outgoing packets applied AH by this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunReplayDropPkts 1.3.6.1.4.1.2636.3.22.1.3.1.1.21
Number of packets dropped by this Phase-2 tunnel due to anti replay check failure.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunAhAuthFails 1.3.6.1.4.1.2636.3.22.1.3.1.1.22
Number of packets received by this Phase-2 tunnel that failed AH authentication.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunEspAuthFails 1.3.6.1.4.1.2636.3.22.1.3.1.1.23
Number of packets received by this Phase-2 tunnel that failed ESP authentication.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunDecryptFails 1.3.6.1.4.1.2636.3.22.1.3.1.1.24
Number of packets received by this Phase-2 tunnel that failed decryption.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunBadHeaders 1.3.6.1.4.1.2636.3.22.1.3.1.1.25
Number of packets received by this Phase-2 tunnel that failed due to bad headers.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunBadTrailers 1.3.6.1.4.1.2636.3.22.1.3.1.1.26
Number of packets received by this Phase-2 tunnel that failed due to bad ESP trailers.
OBJECT-TYPE    
  Counter64  

jnxIpSecTunDroppedPkts 1.3.6.1.4.1.2636.3.22.1.3.1.1.27
Total number of dropped packets for this Phase-2 tunnel.
OBJECT-TYPE    
  Counter64  

jnxIpSecSaTable 1.3.6.1.4.1.2636.3.22.1.3.2
The IPsec Phase-2 Security Association Table. This table identifies the structure (in terms of component SAs) of each active Phase-2 IPsec tunnel. This table contains an entry for each active and expiring security association and maps each entry in the active Phase-2 tunnel table (ipSecTunTable) into a number of entries in this table. The index of this table reflects the rule for identifying Security Associations.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxIpSecSaEntry

jnxIpSecSaEntry 1.3.6.1.4.1.2636.3.22.1.3.2.1
Each entry contains the attributes associated with active and expiring IPsec Phase-2 security associations.
OBJECT-TYPE    
  JnxIpSecSaEntry  

jnxIpSecSaProtocol 1.3.6.1.4.1.2636.3.22.1.3.2.1.1
The index, represents the security protocol (AH, ESP or IPComp) for which this security association was setup.
OBJECT-TYPE    
  INTEGER ah(1), esp(2)  

jnxIpSecSaIndex 1.3.6.1.4.1.2636.3.22.1.3.2.1.2
The index, in the context of the IPsec tunnel ipSecTunIndex, of the security association represented by this table entry. The value of this index is a number which begins at one and is incremented with each SPI associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647.
OBJECT-TYPE    
  Integer32 1..2147483647  

jnxIpSecSaInSpi 1.3.6.1.4.1.2636.3.22.1.3.2.1.3
The value of the incoming SPI.
OBJECT-TYPE    
  JnxSpi  

jnxIpSecSaOutSpi 1.3.6.1.4.1.2636.3.22.1.3.2.1.4
The value of the outgoing SPI.
OBJECT-TYPE    
  JnxSpi  

jnxIpSecSaInAuxSpi 1.3.6.1.4.1.2636.3.22.1.3.2.1.5
The value of the incoming auxiliary SPI. This is valid for AH and ESP bundles.
OBJECT-TYPE    
  JnxSpi  

jnxIpSecSaOutAuxSpi 1.3.6.1.4.1.2636.3.22.1.3.2.1.6
The value of the outgoing auxiliary SPI. This is valid for AH and ESP bundles.
OBJECT-TYPE    
  JnxSpi  

jnxIpSecSaType 1.3.6.1.4.1.2636.3.22.1.3.2.1.7
This field represents the type of security associations which can be either manual or dynamic
OBJECT-TYPE    
  JnxSAType  

jnxIpSecSaEncapMode 1.3.6.1.4.1.2636.3.22.1.3.2.1.8
The encapsulation mode used by an IPsec Phase-2 Tunnel.
OBJECT-TYPE    
  JnxEncapMode  

jnxIpSecSaLifeSize 1.3.6.1.4.1.2636.3.22.1.3.2.1.9
The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
OBJECT-TYPE    
  Integer32  

jnxIpSecSaLifeTime 1.3.6.1.4.1.2636.3.22.1.3.2.1.10
The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
OBJECT-TYPE    
  Integer32  

jnxIpSecSaActiveTime 1.3.6.1.4.1.2636.3.22.1.3.2.1.11
The length of time the IPsec Phase-2 Tunnel has been active in seconds.
OBJECT-TYPE    
  TimeInterval  

jnxIpSecSaLifeSizeThreshold 1.3.6.1.4.1.2636.3.22.1.3.2.1.12
The security association LifeSize refresh threshold in kilobytes.
OBJECT-TYPE    
  Integer32  

jnxIpSecSaLifeTimeThreshold 1.3.6.1.4.1.2636.3.22.1.3.2.1.13
The security association LifeTime refresh threshold in seconds.
OBJECT-TYPE    
  Integer32  

jnxIpSecSaEncryptAlgo 1.3.6.1.4.1.2636.3.22.1.3.2.1.14
The Encryption algorithm used to encrypt the packets which can be either es-cbc or 3des-cbc.
OBJECT-TYPE    
  JnxEncryptAlgo  

jnxIpSecSaAuthAlgo 1.3.6.1.4.1.2636.3.22.1.3.2.1.15
The algorithm used for authentication of packets which can be hmac-md5-96 or hmac-sha1-96
OBJECT-TYPE    
  JnxAuthAlgo  

jnxIpSecSaState 1.3.6.1.4.1.2636.3.22.1.3.2.1.16
This column represents the status of the security association represented by this table entry. If the status of the SA is 'active', the SA is ready for active use. The status 'expiring' represents any of the various states that the security association transitions through before being purged.
OBJECT-TYPE    
  INTEGER unknown(0), active(1), expiring(2)  

Defined Objects

JnxIkePeerType  
The type of IPsec Phase-1 IKE peer identity. The IKE peer may be identified by one of the ID types defined in IPSEC DOI.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), idIpv4Addr(1), idFqdn(2), idDn(3)  

JnxIkeNegoMode  
The IPsec Phase-1 IKE negotiation mode.
TEXTUAL-CONVENTION    
  INTEGER main(1), aggressive(2)  

JnxIkeHashAlgo  
The hash algorithm used in IPsec Phase-1 IKE negotiations.
TEXTUAL-CONVENTION    
  INTEGER md5(1), sha(2)  

JnxIkeAuthMethod  
The authentication method used in IPsec Phase-1 IKE negotiations.
TEXTUAL-CONVENTION    
  INTEGER preSharedKey(1), dssSignature(2), rsaSignature(3), rsaEncryption(4), revRsaEncryption(5)  

JnxIkePeerRole  
Role of the local endpoint in negotiating the IPsec Phase-1 IKE security association. It can be either Initiator or Responder.
TEXTUAL-CONVENTION    
  INTEGER initiator(1), responder(2)  

JnxIkeNegState  
State of the Phase-1 IKE negotiation.
TEXTUAL-CONVENTION    
  INTEGER matured(1), notmatured(2)  

JnxDiffHellmanGrp  
The Diffie Hellman Group used in negotiations. modp768 -- 768-bit MODP modp1024 -- 1024-bit MODP
TEXTUAL-CONVENTION    
  INTEGER unknown(0), modp768(1), modp1024(2)  

JnxKeyType  
The type of key used by an IPsec Phase-2 Tunnel.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), keyIke(1), keyManual(2)  

JnxEncapMode  
The encapsulation mode used by an IPsec Phase-2 Tunnel.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), tunnel(1), transport(2)  

JnxEncryptAlgo  
The encryption algorithm used in negotiations.
TEXTUAL-CONVENTION    
  INTEGER espDes(1), esp3des(2), espNull(3)  

JnxSpi  
The type of the SPI associated with IPsec Phase-2 security associations.
TEXTUAL-CONVENTION    
  Unsigned32 256..4294967295  

JnxAuthAlgo  
The authentication algorithm used by a security association of an IPsec Phase-2 Tunnel.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), hmacMd5(2), hmacSha(3)  

JnxRemotePeerType  
The type of the remote peer gateway (endpoint). It can be one of the following two types: - static (Remote peer whose IP address is known beforehand) - dynamic (Remote peer whose IP address is not known beforehand)
TEXTUAL-CONVENTION    
  INTEGER unknown(0), static(1), dynamic(2)  

JnxSAType  
SA Type manual or dynamic
TEXTUAL-CONVENTION    
  INTEGER unknown(0), manual(1), dynamic(2)  

JnxIkeTunnelEntry  
SEQUENCE    
  Integer32 as jnxIkeTunIndex  
  JnxIkePeerRole as jnxIkeTunLocalRole  
  JnxIkeNegState as jnxIkeTunNegState  
  DisplayString as jnxIkeTunInitiatorCookie  
  DisplayString as jnxIkeTunResponderCookie  
  JnxIkePeerType as jnxIkeTunLocalIdType  
  DisplayString as jnxIkeTunLocalIdValue  
  InetAddressType as jnxIkeTunLocalGwAddrType  
  InetAddress as jnxIkeTunLocalGwAddr  
  DisplayString as jnxIkeTunLocalCertName  
  JnxIkePeerType as jnxIkeTunRemoteIdType  
  DisplayString as jnxIkeTunRemoteIdValue  
  InetAddressType as jnxIkeTunRemoteGwAddrType  
  InetAddress as jnxIkeTunRemoteGwAddr  
  JnxIkeNegoMode as jnxIkeTunNegoMode  
  JnxDiffHellmanGrp as jnxIkeTunDiffHellmanGrp  
  JnxEncryptAlgo as jnxIkeTunEncryptAlgo  
  JnxIkeHashAlgo as jnxIkeTunHashAlgo  
  JnxIkeAuthMethod as jnxIkeTunAuthMethod  
  Integer32 as jnxIkeTunLifeTime  
  TimeInterval as jnxIkeTunActiveTime  
  Counter64 as jnxIkeTunInOctets  
  Counter32 as jnxIkeTunInPkts  
  Counter64 as jnxIkeTunOutOctets  
  Counter32 as jnxIkeTunOutPkts  

JnxIpSecTunnelEntry  
SEQUENCE    
  Integer32 as jnxIpSecTunIndex  
  DisplayString as jnxIpSecRuleName  
  DisplayString as jnxIpSecTermName  
  InetAddressType as jnxIpSecTunLocalGwAddrType  
  InetAddress as jnxIpSecTunLocalGwAddr  
  InetAddressType as jnxIpSecTunRemoteGwAddrType  
  InetAddress as jnxIpSecTunRemoteGwAddr  
  DisplayString as jnxIpSecTunLocalProxyId  
  DisplayString as jnxIpSecTunRemoteProxyId  
  JnxKeyType as jnxIpSecTunKeyType  
  JnxRemotePeerType as jnxIpSecRemotePeerType  
  Integer32 as jnxIpSecTunMtu  
  Counter64 as jnxIpSecTunOutEncryptedBytes  
  Counter64 as jnxIpSecTunOutEncryptedPkts  
  Counter64 as jnxIpSecTunInDecryptedBytes  
  Counter64 as jnxIpSecTunInDecryptedPkts  
  Counter64 as jnxIpsSecTunAHInBytes  
  Counter64 as jnxIpsSecTunAHInPkts  
  Counter64 as jnxIpsSecTunAHOutBytes  
  Counter64 as jnxIpsSecTunAHOutPkts  
  Counter64 as jnxIpSecTunReplayDropPkts  
  Counter64 as jnxIpSecTunAhAuthFails  
  Counter64 as jnxIpSecTunEspAuthFails  
  Counter64 as jnxIpSecTunDecryptFails  
  Counter64 as jnxIpSecTunBadHeaders  
  Counter64 as jnxIpSecTunBadTrailers  
  Counter64 as jnxIpSecTunDroppedPkts  

JnxIpSecSaEntry  
SEQUENCE    
  INTEGER as jnxIpSecSaProtocol  
  Integer32 as jnxIpSecSaIndex  
  JnxSpi as jnxIpSecSaInSpi  
  JnxSpi as jnxIpSecSaOutSpi  
  JnxSpi as jnxIpSecSaInAuxSpi  
  JnxSpi as jnxIpSecSaOutAuxSpi  
  JnxSAType as jnxIpSecSaType  
  JnxEncapMode as jnxIpSecSaEncapMode  
  Integer32 as jnxIpSecSaLifeSize  
  Integer32 as jnxIpSecSaLifeTime  
  TimeInterval as jnxIpSecSaActiveTime  
  Integer32 as jnxIpSecSaLifeSizeThreshold  
  Integer32 as jnxIpSecSaLifeTimeThreshold  
  JnxEncryptAlgo as jnxIpSecSaEncryptAlgo  
  JnxAuthAlgo as jnxIpSecSaAuthAlgo  
  INTEGER as jnxIpSecSaState