JUNIPER-BFD-MIB

File: JUNIPER-BFD-MIB.mib (5552 bytes)

Imported modules

SNMPv2-SMI BFD-STD-MIB JUNIPER-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
NOTIFICATION-TYPE bfdSessIndex jnxBfdMibRoot

Defined Objects

jnxBfdMib 1.3.6.1.4.1.2636.3.45.1
Provides BFD specific data.
MODULE-IDENTITY    

jnxBfdNotification 1.3.6.1.4.1.2636.3.45.1.0
OBJECT IDENTIFIER    

jnxBfdSessTxIntervalHigh 1.3.6.1.4.1.2636.3.45.1.0.1
This notification is generated when the threshold value for transmit interval (jnxBfdSessThreshTxInterval) is set and the bfd session transmit interval (jnxBfdSessCurrTxInterval) adapts to a value greater than the threshold value. This trap is sent only once, when we first exceed the threshold. The transmit interval can continue to adapt beyond the threshold value. Adaptation of transmit interval happens due to network issues causing the BFD session to go down on either the local system or the remote neighbor.
NOTIFICATION-TYPE    
  jnxBfdSessThreshTxInterval  
  jnxBfdSessCurrTxInterval  

jnxBfdSessDetectionTimeHigh 1.3.6.1.4.1.2636.3.45.1.0.2
This notification is generated when the threshold value for detection time (jnxBfdSessThreshDectTime) is set and the bfd session detection-time (jnxBfdSessCurrDectTime) adapts to a value greater than the threshold value. This trap is sent only once, when we first exceed the threshold. The detection-time can continue to adapt beyond the threshold value. Adaptation of detection-time happens due to network issues causing the BFD session to go down on either the local system or the remote neighbor.
NOTIFICATION-TYPE    
  jnxBfdSessThreshDectTime  
  jnxBfdSessCurrDectTime  

jnxBfdObjects 1.3.6.1.4.1.2636.3.45.1.1
OBJECT IDENTIFIER    

jnxBfdSessTable 1.3.6.1.4.1.2636.3.45.1.1.1
Defines the jnxBfd Session Table for providing enterprise specific options to the corresponding bfdSessTable entry.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxBfdSessEntry

jnxBfdSessEntry 1.3.6.1.4.1.2636.3.45.1.1.1.1
Defines an entry in the jnxBfdSessTable. This essentially augments the bfdSessTable with additional objects.
OBJECT-TYPE    
  JnxBfdSessEntry  

jnxBfdSessThreshTxInterval 1.3.6.1.4.1.2636.3.45.1.1.1.1.1
The threshold value for transmit interval in microseconds. If the current transmit interval value adapts to a value greater than the threshold value, jnxBfdSessTxIntervalHigh trap is raised.
OBJECT-TYPE    
  Unsigned32  

jnxBfdSessCurrTxInterval 1.3.6.1.4.1.2636.3.45.1.1.1.1.2
The current transmit interval in microseconds.
OBJECT-TYPE    
  Unsigned32  

jnxBfdSessThreshDectTime 1.3.6.1.4.1.2636.3.45.1.1.1.1.3
The threshold value for detection time in microseconds. If the current detection time value is greater than the threshold value at the time when session state changes to up(1), jnxBfdSessDetectionTimeHigh trap is raised.
OBJECT-TYPE    
  Unsigned32  

jnxBfdSessCurrDectTime 1.3.6.1.4.1.2636.3.45.1.1.1.1.4
The actual value of detection time for the session.
OBJECT-TYPE    
  Unsigned32  

Defined Objects

JnxBfdSessEntry  
SEQUENCE    
  Unsigned32 as jnxBfdSessThreshTxInterval  
  Unsigned32 as jnxBfdSessCurrTxInterval  
  Unsigned32 as jnxBfdSessThreshDectTime  
  Unsigned32 as jnxBfdSessCurrDectTime