JUNIPER-L2CP-FEATURES-MIB

File: JUNIPER-L2CP-FEATURES-MIB.mib (9411 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
BRIDGE-MIB JUNIPER-SMI

Imported symbols

OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
DisplayString TruthValue InterfaceIndex
ifIndex dot1dStpPort dot1dStpPortEntry
jnxL2cpMibRoot

Defined Objects

jnxL2cpFeaturesMIB 1.3.6.1.4.1.2636.3.53.1
This mib module is for Juniper Networks Proprietory Layer 2 control protocol (L2CP) features
MODULE-IDENTITY    

jnxL2cpObjects 1.3.6.1.4.1.2636.3.53.1.1
OBJECT IDENTIFIER    

jnxL2cpStpProtectObjects 1.3.6.1.4.1.2636.3.53.1.1.1
OBJECT IDENTIFIER    

jnxDot1dStpPortProtectTable 1.3.6.1.4.1.2636.3.53.1.1.1.1
Defines the jnxDot1dStp Port Table for providing enterprise specific extensions for Root Protect and Loop Protect to the corresponding dot1dStpPortTable entry.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxDot1dStpPortProtectEntry

jnxDot1dStpPortProtectEntry 1.3.6.1.4.1.2636.3.53.1.1.1.1.1
Defines an entry in the jnxDot1dStpPortProtectTable. This essentially augments the dot1dStpPortTable with additional objects.
OBJECT-TYPE    
  JnxDot1dStpPortProtectEntry  

jnxDot1dStpPortRootProtectEnabled 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.1
A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port, even it has the best spanning tree priority vector. This parameter should be FALSE by default.
OBJECT-TYPE    
  TruthValue  

jnxDot1dStpPortRootProtectState 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.2
Indicates whether the port was prevented from being a root port. This parameter will always return 'no-error (0)' if jnxDot1dStpPortRootProtectEnabled is FALSE.
OBJECT-TYPE    
  INTEGER no-error(0), root-prevented(1)  

jnxDot1dStpPortLoopProtectEnabled 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.3
A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port when the received superior BPDU is aged out. This parameter should be FALSE by default.
OBJECT-TYPE    
  TruthValue  

jnxDot1dStpPortLoopProtectState 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.4
Indicates whether a potential Loop was prevented on the port This parameter will always return 'no-error (0)' if jnxDot1dStpPortLoopProtectEnabled is FALSE.
OBJECT-TYPE    
  INTEGER no-error(0), loop-prevented(1)  

jnxL2cpBpduProtectObjects 1.3.6.1.4.1.2636.3.53.1.1.2
OBJECT IDENTIFIER    

jnxL2cpBpduProtectPortTable 1.3.6.1.4.1.2636.3.53.1.1.2.1
Defines a Port Table for BPDU Protect information. This contains only those ports on which BPDU Protect can be configured.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxL2cpBpduProtectPortEntry

jnxL2cpBpduProtectPortEntry 1.3.6.1.4.1.2636.3.53.1.1.2.1.1
Defines an entry in the jnxL2cpBpduProtectPortTable. A list containing BPDU Protect information for each Port.
OBJECT-TYPE    
  JnxL2cpBpduProtectPortEntry  

jnxL2cpBpduProtectPortEnabled 1.3.6.1.4.1.2636.3.53.1.1.2.1.1.1
A Boolean value set by management indicating whether BPDU protect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a BPDU. This parameter should be FALSE by default.
OBJECT-TYPE    
  TruthValue  

jnxL2cpPortBpduError 1.3.6.1.4.1.2636.3.53.1.1.2.1.1.2
Indicates whether a BPDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpBpduProtectPortEnabled is FALSE.
OBJECT-TYPE    
  INTEGER no-error(0), detected(1)  

jnxL2cpBpduProtectDisableTimeout 1.3.6.1.4.1.2636.3.53.1.1.2.2
Returns the value of time (in seconds) after which a port on which BPDU error was detected will be re-enabled. A returned value of 0 indicates that port will not be re-enabled automatically.
OBJECT-TYPE    
  INTEGER  

jnxLacpNotifyVars 1.3.6.1.4.1.2636.3.53.1.1.3
OBJECT IDENTIFIER    

jnxLacpInterfaceName 1.3.6.1.4.1.2636.3.53.1.1.3.1
Lacp member interface.
OBJECT-TYPE    
  DisplayString  

jnxLacpifIndex 1.3.6.1.4.1.2636.3.53.1.1.3.2
Snmp ifIndex of member interface.
OBJECT-TYPE    
  InterfaceIndex  

jnxLacpAggregateInterfaceName 1.3.6.1.4.1.2636.3.53.1.1.3.3
Lacp Aggregate interface.
OBJECT-TYPE    
  DisplayString  

jnxLacpAggregateifIndex 1.3.6.1.4.1.2636.3.53.1.1.3.4
Snmp ifIndex of Aggregator.
OBJECT-TYPE    
  InterfaceIndex  

jnxLacpAggPortActorOperState 1.3.6.1.4.1.2636.3.53.1.1.3.5
Port actor operational state.
OBJECT-TYPE    
  DisplayString  

jnxL2cpNotifications 1.3.6.1.4.1.2636.3.53.1.2
OBJECT IDENTIFIER    

jnxL2cpProtectTraps 1.3.6.1.4.1.2636.3.53.1.2.0
OBJECT IDENTIFIER    

jnxPortRootProtectStateChangeTrap 1.3.6.1.4.1.2636.3.53.1.2.0.1
Generated when the ports Root-protect state (no-error or root-prevented) changes.
NOTIFICATION-TYPE    
  jnxDot1dStpPortRootProtectState  

jnxPortLoopProtectStateChangeTrap 1.3.6.1.4.1.2636.3.53.1.2.0.2
Generated when the ports Loop-protect state (no-error or loop-prevented) changes.
NOTIFICATION-TYPE    
  jnxDot1dStpPortLoopProtectState  

jnxPortBpduErrorStatusChangeTrap 1.3.6.1.4.1.2636.3.53.1.2.0.3
Generated when the ports BPDU error state (no-error or detected) changes.
NOTIFICATION-TYPE    
  jnxL2cpPortBpduError  

jnxLacpNotificationsPrefix 1.3.6.1.4.1.2636.3.53.1.2.1
OBJECT IDENTIFIER    

jnxLacpTimeOut 1.3.6.1.4.1.2636.3.53.1.2.1.1
Lacp times out
NOTIFICATION-TYPE    
  jnxLacpInterfaceName  
  jnxLacpifIndex  
  jnxLacpAggregateInterfaceName  
  jnxLacpAggregateifIndex  
  jnxLacpAggPortActorOperState  

Defined Objects

JnxDot1dStpPortProtectEntry  
SEQUENCE    
  TruthValue as jnxDot1dStpPortRootProtectEnabled  
  INTEGER as jnxDot1dStpPortRootProtectState  
  TruthValue as jnxDot1dStpPortLoopProtectEnabled  
  INTEGER as jnxDot1dStpPortLoopProtectState  

JnxL2cpBpduProtectPortEntry  
SEQUENCE    
  TruthValue as jnxL2cpBpduProtectPortEnabled  
  INTEGER as jnxL2cpPortBpduError