JUNIPER-VPN-MIB

File: JUNIPER-VPN-MIB.mib (33766 bytes)

Imported modules

SNMPv2-SMI INET-ADDRESS-MIB IF-MIB
SNMPv2-TC SNMP-FRAMEWORK-MIB JUNIPER-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Counter32 Counter64 Gauge32
Integer32 TimeTicks Unsigned32
InetAddress InetAddressType InterfaceIndexOrZero
TEXTUAL-CONVENTION RowStatus StorageType
SnmpAdminString jnxMibs

Defined Objects

jnxVpnMIB 1.3.6.1.4.1.2636.3.26
Extended VPN MIB module to support VPN Identifier for locally switched L2 circuits.
MODULE-IDENTITY    

jnxVpnMIBNotifications 1.3.6.1.4.1.2636.3.26.0
OBJECT IDENTIFIER    

jnxVpnIfUp 1.3.6.1.4.1.2636.3.26.0.1
A jnxVpnIfUp notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions out of the 'down' state.
NOTIFICATION-TYPE    
  jnxVpnIfVpnType  
  jnxVpnIfVpnName  
  jnxVpnIfIndex  

jnxVpnIfDown 1.3.6.1.4.1.2636.3.26.0.2
A jnxVpnIfDown notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions to the 'down' state.
NOTIFICATION-TYPE    
  jnxVpnIfVpnType  
  jnxVpnIfVpnName  
  jnxVpnIfIndex  

jnxVpnPwUp 1.3.6.1.4.1.2636.3.26.0.3
A jnxVpnPwUp notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions out of the 'down' state.
NOTIFICATION-TYPE    
  jnxVpnPwVpnType  
  jnxVpnPwVpnName  
  jnxVpnPwIndex  

jnxVpnPwDown 1.3.6.1.4.1.2636.3.26.0.4
A jnxVpnPwDown notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions to the 'down' state.
NOTIFICATION-TYPE    
  jnxVpnPwVpnType  
  jnxVpnPwVpnName  
  jnxVpnPwIndex  

jnxVpnMibObjects 1.3.6.1.4.1.2636.3.26.1
OBJECT IDENTIFIER    

jnxVpnInfo 1.3.6.1.4.1.2636.3.26.1.1
OBJECT IDENTIFIER    

jnxVpnConfiguredVpns 1.3.6.1.4.1.2636.3.26.1.1.1
Number of configured VPNs.
OBJECT-TYPE    
  Gauge32  

jnxVpnActiveVpns 1.3.6.1.4.1.2636.3.26.1.1.2
Number of active VPNs.
OBJECT-TYPE    
  Gauge32  

jnxVpnNextIfIndex 1.3.6.1.4.1.2636.3.26.1.1.3
Next free VPN interface index.
OBJECT-TYPE    
  Unsigned32  

jnxVpnNextPwIndex 1.3.6.1.4.1.2636.3.26.1.1.4
Next free Pseudo-Wire index.
OBJECT-TYPE    
  Unsigned32  

jnxVpnNextRTIndex 1.3.6.1.4.1.2636.3.26.1.1.5
Next free Route Target index.
OBJECT-TYPE    
  Unsigned32  

jnxVpnTable 1.3.6.1.4.1.2636.3.26.1.2
Table of Configured VPNs.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxVpnEntry

jnxVpnEntry 1.3.6.1.4.1.2636.3.26.1.2.1
Entry containing information about a particular VPN.
OBJECT-TYPE    
  JnxVpnEntry  

jnxVpnType 1.3.6.1.4.1.2636.3.26.1.2.1.1
Type of the VPN.
OBJECT-TYPE    
  JnxVpnType  

jnxVpnName 1.3.6.1.4.1.2636.3.26.1.2.1.2
Name of the VPN. This should ideally be unique in the Service Provider's domain; at a minimum, it MUST be unique per Provider Edge router.
OBJECT-TYPE    
  JnxVpnName  

jnxVpnRowStatus 1.3.6.1.4.1.2636.3.26.1.2.1.3
This variable is used to create, modify, and/or delete a row in this table.
OBJECT-TYPE    
  RowStatus  

jnxVpnStorageType 1.3.6.1.4.1.2636.3.26.1.2.1.4
This variable indicates the storage type for this object.
OBJECT-TYPE    
  StorageType  

jnxVpnDescription 1.3.6.1.4.1.2636.3.26.1.2.1.5
String describing the VPN.
OBJECT-TYPE    
  SnmpAdminString  

jnxVpnIdentifierType 1.3.6.1.4.1.2636.3.26.1.2.1.6
Type of the following JnxVpnIdentifier.
OBJECT-TYPE    
  JnxVpnIdentifierType  

jnxVpnIdentifier 1.3.6.1.4.1.2636.3.26.1.2.1.7
In the case of BGP VPNs, this is the Route Distinguisher for the VPN. In the case of LDP VPNs, this is the VC ID for the circuit. A value of all zeros indicates that the neither a Route Distinguisher nor a VC ID is configured for the VPN.
OBJECT-TYPE    
  JnxVpnIdentifier  

jnxVpnConfiguredSites 1.3.6.1.4.1.2636.3.26.1.2.1.8
The number of sites configured in the VPN. Must be set to zero if not applicable.
OBJECT-TYPE    
  Gauge32  

jnxVpnActiveSites 1.3.6.1.4.1.2636.3.26.1.2.1.9
The number of active sites (i.e., sites whose state is active) in the VPN.
OBJECT-TYPE    
  Gauge32  

jnxVpnLocalAddresses 1.3.6.1.4.1.2636.3.26.1.2.1.10
The number of addresses learned from the CE device.
OBJECT-TYPE    
  Gauge32  

jnxVpnTotalAddresses 1.3.6.1.4.1.2636.3.26.1.2.1.11
The total number of addresses in the VPN RIB.
OBJECT-TYPE    
  Gauge32  

jnxVpnAge 1.3.6.1.4.1.2636.3.26.1.2.1.12
The age (i.e., time from creation till now) of this VPN in hundredths of a second.
OBJECT-TYPE    
  TimeTicks  

jnxVpnIfTable 1.3.6.1.4.1.2636.3.26.1.3
Table of VPN Interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxVpnIfEntry

jnxVpnIfEntry 1.3.6.1.4.1.2636.3.26.1.3.1
Entry containing information about a particular VPN interface.
OBJECT-TYPE    
  JnxVpnIfEntry  

jnxVpnIfVpnType 1.3.6.1.4.1.2636.3.26.1.3.1.1
Type of the VPN to which this interface belongs.
OBJECT-TYPE    
  JnxVpnType  

jnxVpnIfVpnName 1.3.6.1.4.1.2636.3.26.1.3.1.2
Name of the VPN to which this interface belongs.
OBJECT-TYPE    
  JnxVpnName  

jnxVpnIfIndex 1.3.6.1.4.1.2636.3.26.1.3.1.3
The index of this interface in the VPN. Each interface in the VPN is given a unique index. The RowStatus says whether a given interface (i.e., a row in this table) is valid or not. Note: this index MUST NOT be zero.
OBJECT-TYPE    
  Unsigned32  

jnxVpnIfRowStatus 1.3.6.1.4.1.2636.3.26.1.3.1.4
This variable is used to create, modify, and/or delete a row in this table.
OBJECT-TYPE    
  RowStatus  

jnxVpnIfStorageType 1.3.6.1.4.1.2636.3.26.1.3.1.5
This variable indicates the storage type for this object.
OBJECT-TYPE    
  StorageType  

jnxVpnIfAssociatedPw 1.3.6.1.4.1.2636.3.26.1.3.1.6
Index of associated Pseudo-wire, if any, in which case the index MUST be non-zero. If none, then this index MUST be zero.
OBJECT-TYPE    
  Unsigned32  

jnxVpnIfProtocol 1.3.6.1.4.1.2636.3.26.1.3.1.7
Protocol running over this VPN interface. The values up to 10 are taken from draft-martini-l2circuit-trans-mpls-08.txt; the value for vpls is taken from draft-lasserre-vkompella-ppvpn-vpls-01.txt. The values from 20-23 are used when the VPN is a Layer 3 VPN.
OBJECT-TYPE    
  INTEGER other(0), frameRelay(1), atmAal5(2), atmCell(3), ethernetVlan(4), ethernet(5), ciscoHdlc(6), ppp(7), cem(8), atmVcc(9), atmVpc(10), vpls(11), ipInterworking(12), snapInterworking(13), frameRelayPort(15), satope1(17), satopt1(18), static(20), rip(21), ospf(22), bgp(23), satope3(24), satopt3(25), cesop(26), atmTrunkNNI(129), atmTrunkUNI(130)  

jnxVpnIfInBandwidth 1.3.6.1.4.1.2636.3.26.1.3.1.8
Maximum bandwidth that the CE connected over this VPN i/f can send to the PE, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum.
OBJECT-TYPE    
  Unsigned32  

jnxVpnIfOutBandwidth 1.3.6.1.4.1.2636.3.26.1.3.1.9
Maximum bandwidth that the PE can send to the CE over this VPN interface, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum.
OBJECT-TYPE    
  Unsigned32  

jnxVpnIfStatus 1.3.6.1.4.1.2636.3.26.1.3.1.10
Status of this interface.
OBJECT-TYPE    
  INTEGER unknown(0), noLocalInterface(1), disabled(2), encapsulationMismatch(3), down(4), up(5)  

jnxVpnPwTable 1.3.6.1.4.1.2636.3.26.1.4
Table of Pseudo-Wire Connections.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxVpnPwEntry

jnxVpnPwEntry 1.3.6.1.4.1.2636.3.26.1.4.1
Entry containing information about a particular VPN.
OBJECT-TYPE    
  JnxVpnPwEntry  

jnxVpnPwVpnType 1.3.6.1.4.1.2636.3.26.1.4.1.1
The type of the VPN to which this Pseudo-Wire belongs.
OBJECT-TYPE    
  JnxVpnType  

jnxVpnPwVpnName 1.3.6.1.4.1.2636.3.26.1.4.1.2
The name of the VPN to which this Pseudo-Wire belongs.
OBJECT-TYPE    
  JnxVpnName  

jnxVpnPwIndex 1.3.6.1.4.1.2636.3.26.1.4.1.3
The index of this Pseudo-Wire in the VPN. Each Pseudo Wire in the VPN is given a unique index. The RowStatus says whether a given Pseudo Wire (i.e., a row in this table) is valid or not. Note: this index MUST NOT be zero.
OBJECT-TYPE    
  Unsigned32  

jnxVpnPwRowStatus 1.3.6.1.4.1.2636.3.26.1.4.1.4
This variable is used to create, modify, and/or delete a row in this table.
OBJECT-TYPE    
  RowStatus  

jnxVpnPwStorageType 1.3.6.1.4.1.2636.3.26.1.4.1.5
This variable indicates the storage type for this object.
OBJECT-TYPE    
  StorageType  

jnxVpnPwAssociatedInterface 1.3.6.1.4.1.2636.3.26.1.4.1.6
The VPN index of the interface associated with this Pseudo Wire, if any. If there is no interface associated with this Pseudo Wire, a value of zero is to be returned.
OBJECT-TYPE    
  Unsigned32  

jnxVpnPwLocalSiteId 1.3.6.1.4.1.2636.3.26.1.4.1.7
The local site identifier for this Pseudo-Wire. If there is no local site identifier, a value of zero is to be returned.
OBJECT-TYPE    
  Unsigned32  

jnxVpnPwRemoteSiteId 1.3.6.1.4.1.2636.3.26.1.4.1.8
The remote site (i.e., the site at the other end of this Pseudo-Wire) identifier. If there is no remote site identifier, a value of zero is to be returned.
OBJECT-TYPE    
  Unsigned32  

jnxVpnRemotePeIdAddrType 1.3.6.1.4.1.2636.3.26.1.4.1.9
The type of address assigned to the remote PE.
OBJECT-TYPE    
  InetAddressType  

jnxVpnRemotePeIdAddress 1.3.6.1.4.1.2636.3.26.1.4.1.10
The address of the remote PE, i.e., the router at the other end of the Pseudo-Wire.
OBJECT-TYPE    
  InetAddress  

jnxVpnPwTunnelType 1.3.6.1.4.1.2636.3.26.1.4.1.11
The type of the tunnel over which the Pseudo-Wire is carried. If several Pseudo-Wires can be carried in one tunnel, each Pseudo-Wire is identified by the multiplexor/ demultiplexor within this tunnel.
OBJECT-TYPE    
  INTEGER static(1), gre(2), l2tpv3(3), ipSec(4), ldp(5), rsvpTe(6), crLdp(7)  

jnxVpnPwTunnelName 1.3.6.1.4.1.2636.3.26.1.4.1.12
The name of the Tunnel over which this Pseudo-Wire is carried, if any.
OBJECT-TYPE    
  SnmpAdminString  

jnxVpnPwReceiveDemux 1.3.6.1.4.1.2636.3.26.1.4.1.13
The value of the demultiplexor that identifies received packets as belonging to this Pseudo-Wire, if any.
OBJECT-TYPE    
  JnxVpnMultiplexor  

jnxVpnPwTransmitDemux 1.3.6.1.4.1.2636.3.26.1.4.1.14
The value of the demultiplexor that identifies transmitted packets as belonging to this Pseudo-Wire, if any.
OBJECT-TYPE    
  JnxVpnMultiplexor  

jnxVpnPwStatus 1.3.6.1.4.1.2636.3.26.1.4.1.15
Status of the Pseudo-Wire.
OBJECT-TYPE    
  INTEGER unknown(0), down(1), up(2)  

jnxVpnPwTunnelStatus 1.3.6.1.4.1.2636.3.26.1.4.1.16
Status of the PE-to-PE tunnel over which the Pseudo- Wire is carried.
OBJECT-TYPE    
  INTEGER unknown(0), down(1), testing(2), up(3)  

jnxVpnPwRemoteSiteStatus 1.3.6.1.4.1.2636.3.26.1.4.1.17
Status of the interface at the remote end of the Pseudo-Wire.
OBJECT-TYPE    
  INTEGER unknown(0), outOfRange(1), down(2), up(3)  

jnxVpnPwTimeUp 1.3.6.1.4.1.2636.3.26.1.4.1.18
The total time in hundredths of a second that this Pseudo-Wire has been operational.
OBJECT-TYPE    
  TimeTicks  

jnxVpnPwTransitions 1.3.6.1.4.1.2636.3.26.1.4.1.19
The number of state transitions (up -> down and down -> up) this Tunnel has undergone.
OBJECT-TYPE    
  Gauge32  

jnxVpnPwLastTransition 1.3.6.1.4.1.2636.3.26.1.4.1.20
The time in hundredths of a second since the last transition occurred on this Tunnel.
OBJECT-TYPE    
  TimeTicks  

jnxVpnPwPacketsSent 1.3.6.1.4.1.2636.3.26.1.4.1.21
The number of packets that have been sent over this Pseudo-Wire.
OBJECT-TYPE    
  Counter64  

jnxVpnPwOctetsSent 1.3.6.1.4.1.2636.3.26.1.4.1.22
The number of octets that have been sent over this Pseudo-Wire.
OBJECT-TYPE    
  Counter64  

jnxVpnPwPacketsReceived 1.3.6.1.4.1.2636.3.26.1.4.1.23
The number of packets that have been received over this Pseudo-Wire.
OBJECT-TYPE    
  Counter64  

jnxVpnPwOctetsReceived 1.3.6.1.4.1.2636.3.26.1.4.1.24
The number of octets that have been received over this Pseudo-Wire.
OBJECT-TYPE    
  Counter64  

jnxVpnPwLRPacketsSent 1.3.6.1.4.1.2636.3.26.1.4.1.25
The number of packets that have been sent over this Pseudo-Wire.
OBJECT-TYPE    
  Counter32  

jnxVpnPwLROctetsSent 1.3.6.1.4.1.2636.3.26.1.4.1.26
The number of octets that have been sent over this Pseudo-Wire.
OBJECT-TYPE    
  Counter32  

jnxVpnPwLRPacketsReceived 1.3.6.1.4.1.2636.3.26.1.4.1.27
The number of packets that have been received over this Pseudo-Wire.
OBJECT-TYPE    
  Counter32  

jnxVpnPwLROctetsReceived 1.3.6.1.4.1.2636.3.26.1.4.1.28
The number of octets that have been received over this Pseudo-Wire.
OBJECT-TYPE    
  Counter32  

jnxVpnRTTable 1.3.6.1.4.1.2636.3.26.1.5
Table of Route Targets for a VPN.
OBJECT-TYPE    
  SEQUENCE OF  
    JnxVpnRTEntry

jnxVpnRTEntry 1.3.6.1.4.1.2636.3.26.1.5.1
Entry containing information about a particular VPN.
OBJECT-TYPE    
  JnxVpnRTEntry  

jnxVpnRTVpnType 1.3.6.1.4.1.2636.3.26.1.5.1.1
The type of the VPN for which this list of Route Targets are defined.
OBJECT-TYPE    
  JnxVpnType  

jnxVpnRTVpnName 1.3.6.1.4.1.2636.3.26.1.5.1.2
The name of the VPN for which this list of Route Targets are defined.
OBJECT-TYPE    
  JnxVpnName  

jnxVpnRTIndex 1.3.6.1.4.1.2636.3.26.1.5.1.3
The index within the list of Route Targets that specifies individual Route Targets that define the VPN. Note: this index MUST NOT be zero.
OBJECT-TYPE    
  Unsigned32  

jnxVpnRTRowStatus 1.3.6.1.4.1.2636.3.26.1.5.1.4
This variable is used to create, modify, and/or delete a row in this table.
OBJECT-TYPE    
  RowStatus  

jnxVpnRTStorageType 1.3.6.1.4.1.2636.3.26.1.5.1.5
This variable indicates the storage type for this object.
OBJECT-TYPE    
  StorageType  

jnxVpnRTType 1.3.6.1.4.1.2636.3.26.1.5.1.6
Type of the following Route Target. This can one of 'routeTarget[012]' or 'none'.
OBJECT-TYPE    
  JnxVpnIdentifierType  

jnxVpnRT 1.3.6.1.4.1.2636.3.26.1.5.1.7
Route Target for the VPN. If the jnxVpnRTType is 'none', this value should be all zeros.
OBJECT-TYPE    
  JnxVpnIdentifier  

jnxVpnRTFunction 1.3.6.1.4.1.2636.3.26.1.5.1.8
The route target export distribution type.
OBJECT-TYPE    
  INTEGER import(1), export(2), both(3)  

jnxVpnMIBConformance 1.3.6.1.4.1.2636.3.26.2
OBJECT IDENTIFIER    

Defined Objects

JnxVpnName  
Name of the VPN.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(1..128)  

JnxVpnType  
Type of the VPN. The following types have been defined: bgpIpVpn: RFC 2547 VPNs (see draft-ietf-ppvpn-rfc2547bis); bgpL2Vpn: BGP-based Layer 2 VPNs (see draft-kompella-ppvpn-l2vpn); bgpVpls: BGP-based VPLS (see draft-kompella-ppvnp-vpls); l2Circuit: LDP-based point-to-point Layer 2 circuits (see draft-martini-l2circuit-trans-mpls); ldpVpls: LDP-based VPLS (see draft-lasserre-vkompella-ppvpn-vpls); opticalVpn: BGP-based Optical (port based) VPNs (see draft-ouldbrahim-bgpgmpls-ovpn); vpOxc: Virtual Private Optical Cross-Connect (see draft-ouldbrahim-ppvpn-vpoxc); ccc: proprietary Layer 2 circuit; bgpAtmVpn: ATM over MPLS (draft to be published).
TEXTUAL-CONVENTION    
  INTEGER other(1), bgpIpVpn(2), bgpL2Vpn(3), bgpVpls(4), l2Circuit(5), ldpVpls(6), opticalVpn(7), vpOxc(8), ccc(9), bgpAtmVpn(10)  

JnxVpnIdentifierType  
Type of the VPN Identifier. This includes Route Distinguishers, Route Targets, and VC IDs.
TEXTUAL-CONVENTION    
  INTEGER none(0), other(1), routeDistinguisher(2), routeDistinguisher0(3), routeDistinguisher1(4), routeDistinguisher2(5), routeTarget(6), routeTarget0(7), routeTarget1(8), routeTarget2(9), vcId(10), localSwitch(11)  

JnxVpnIdentifier  
Syntax for a VPN identifier. A VPN Identifier is always interpreted within the context of an jnxVpnIdentifierType value. The jnxVpnIdentifierType object which defines the context must be registered immediately before the object which uses the VpnIdentifier textual convention. In other words, the object identifiers for the jnxVpnIdentifierType object and the jnxVpnIdentifier object MUST have the same length and the last sub-identifier of the jnxVpnIdentifierType object MUST be 1 less than the last sub-identifier of the jnxVpnIdentifier object.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnRouteDistinguisher  
Represents a Generic Route Distinguisher. Reference: BGP/MPLS VPNs, draft-ietf-ppvpn-rfc2547bis.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnRouteDistinguisher0  
Represents a Type 0 Route Distinguisher. Reference: BGP/MPLS VPNs, draft-ietf-ppvpn-rfc2547bis.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnRouteDistinguisher1  
Represents a Type 1 Route Distinguisher. Reference: BGP/MPLS VPNs, draft-ietf-ppvpn-rfc2547bis.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnRouteDistinguisher2  
Represents a Type 2 Route Distinguisher. Reference: BGP/MPLS VPNs, draft-ietf-ppvpn-rfc2547bis.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnRouteTarget  
Represents a Generic Route Target. Reference: BGP Extended Communities Attribute, draft-ietf-idr-bgp-ext-communities.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnRouteTarget0  
Represents a Type 00 Route Target. Reference: BGP Extended Communities Attribute, draft-ietf-idr-bgp-ext-communities.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnRouteTarget1  
Represents a Type 01 Route Target. Reference: BGP Extended Communities Attribute, draft-ietf-idr-bgp-ext-communities.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnRouteTarget2  
Represents a Type 02 Route Target. Reference: BGP Extended Communities Attribute, draft-ietf-idr-bgp-ext-communities.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnVCIdentifier  
Represents a PE ID, VC ID pair. The PE ID is the Router ID of the remote PE. The VC ID follows the description given in draft-martini-l2circuit-trans.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnMultiplexor  
Syntax for a VPN multiplexor/demultiplexor within a Pseudo-Wire Tunnel.
TEXTUAL-CONVENTION    
  Unsigned32  

JnxVpnLocalSwitchIdentifier  
The string representing the name of two interfaces that are being locally switched separated by a colon.
TEXTUAL-CONVENTION    
  OCTET STRING SIZE(0..256)  

JnxVpnEntry  
SEQUENCE    
  JnxVpnType as jnxVpnType  
  JnxVpnName as jnxVpnName  
  RowStatus as jnxVpnRowStatus  
  StorageType as jnxVpnStorageType  
  SnmpAdminString as jnxVpnDescription  
  JnxVpnIdentifierType as jnxVpnIdentifierType  
  JnxVpnIdentifier as jnxVpnIdentifier  
  Gauge32 as jnxVpnConfiguredSites  
  Gauge32 as jnxVpnActiveSites  
  Gauge32 as jnxVpnLocalAddresses  
  Gauge32 as jnxVpnTotalAddresses  
  TimeTicks as jnxVpnAge  

JnxVpnIfEntry  
SEQUENCE    
  JnxVpnType as jnxVpnIfVpnType  
  JnxVpnName as jnxVpnIfVpnName  
  Unsigned32 as jnxVpnIfIndex  
  RowStatus as jnxVpnIfRowStatus  
  StorageType as jnxVpnIfStorageType  
  Unsigned32 as jnxVpnIfAssociatedPw  
  INTEGER as jnxVpnIfProtocol  
  Unsigned32 as jnxVpnIfInBandwidth  
  Unsigned32 as jnxVpnIfOutBandwidth  
  INTEGER as jnxVpnIfStatus  

JnxVpnPwEntry  
SEQUENCE    
  JnxVpnType as jnxVpnPwVpnType  
  JnxVpnName as jnxVpnPwVpnName  
  Unsigned32 as jnxVpnPwIndex  
  RowStatus as jnxVpnPwRowStatus  
  StorageType as jnxVpnPwStorageType  
  Unsigned32 as jnxVpnPwAssociatedInterface  
  Unsigned32 as jnxVpnPwLocalSiteId  
  Unsigned32 as jnxVpnPwRemoteSiteId  
  InetAddressType as jnxVpnRemotePeIdAddrType  
  InetAddress as jnxVpnRemotePeIdAddress  
  INTEGER as jnxVpnPwTunnelType  
  SnmpAdminString as jnxVpnPwTunnelName  
  JnxVpnMultiplexor as jnxVpnPwReceiveDemux  
  JnxVpnMultiplexor as jnxVpnPwTransmitDemux  
  INTEGER as jnxVpnPwStatus  
  INTEGER as jnxVpnPwTunnelStatus  
  INTEGER as jnxVpnPwRemoteSiteStatus  
  TimeTicks as jnxVpnPwTimeUp  
  Gauge32 as jnxVpnPwTransitions  
  TimeTicks as jnxVpnPwLastTransition  
  Counter64 as jnxVpnPwPacketsSent  
  Counter64 as jnxVpnPwOctetsSent  
  Counter64 as jnxVpnPwPacketsReceived  
  Counter64 as jnxVpnPwOctetsReceived  
  Counter32 as jnxVpnPwLRPacketsSent  
  Counter32 as jnxVpnPwLROctetsSent  
  Counter32 as jnxVpnPwLRPacketsReceived  
  Counter32 as jnxVpnPwLROctetsReceived  

JnxVpnRTEntry  
SEQUENCE    
  JnxVpnType as jnxVpnRTVpnType  
  JnxVpnName as jnxVpnRTVpnName  
  Unsigned32 as jnxVpnRTIndex  
  RowStatus as jnxVpnRTRowStatus  
  StorageType as jnxVpnRTStorageType  
  JnxVpnIdentifierType as jnxVpnRTType  
  JnxVpnIdentifier as jnxVpnRT  
  INTEGER as jnxVpnRTFunction