
Juniper-PROFILE-MIB
File:
Juniper-PROFILE-MIB.mib (22632 bytes)
Imported modules
Imported symbols
Defined Objects
| juniProfileNameEntry |
1.3.6.1.4.1.4874.2.2.25.1.1.1.1 |
| A mapping of a profile name to an integer identifier for that name. |
| OBJECT-TYPE |
|
|
|
| |
JuniProfileNameEntry |
|
|
| juniProfileNameId |
1.3.6.1.4.1.4874.2.2.25.1.1.1.1.3 |
| The integer identifier associated with this profile name. This value of this identifier is assigned by the device when an entry in this table is created. |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| juniProfileIdEntry |
1.3.6.1.4.1.4874.2.2.25.1.1.2.1 |
| A mapping of an integer identifier to a profile name. |
| OBJECT-TYPE |
|
|
|
| |
JuniProfileIdEntry |
|
|
| juniProfAssignIfTable |
1.3.6.1.4.1.4874.2.2.25.1.2.1.1 |
| Table providing profile assignment to interface/encapsulation pair. The entries in this table specify which profile to use when creating and configuring a dynamic interface (whose type is identified by the encapsulation) above a specified interface. Each entry in this table is reflected in a juniProfAssignIfTable entry having a zero-valued range identifier. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
JuniProfAssignIfEntry |
|
| juniProfAssignIfEntry |
1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1 |
| An assignment of a profile to an interface/encapsulation pair. |
| OBJECT-TYPE |
|
|
|
| |
JuniProfAssignIfEntry |
|
|
| juniProfAssignIfEncaps |
1.3.6.1.4.1.4874.2.2.25.1.2.1.1.1.2 |
| The encapsulated protocol type to which the assigned profile pertains. An interface may have a different profile assigned for each encapsulation it supports. If an entry for a specific encapsulation is absent, the profile assigned for the 'any' encapsulation will be used (if that assignment is present in this table). |
| OBJECT-TYPE |
|
|
|
| |
JuniProfileIfEncaps |
|
|
| juniProfToIfMapEntry |
1.3.6.1.4.1.4874.2.2.25.1.2.1.2.1 |
| Reports an interface/encapsulation pair assigned to a profile. |
| OBJECT-TYPE |
|
|
|
| |
JuniProfToIfMapEntry |
|
|
| juniProfAssignIfRangeTable |
1.3.6.1.4.1.4874.2.2.25.1.2.2.1 |
| Table providing profile assignment to interface/encapsulation/range 3-tuple. The entries in this table specify which profile to use when creating and configuring a dynamic interface (whose type is identified by the encapsulation) above a specified interface, with profile selection being further discriminated by the range identifier. Each entry in juniProfAssignIfTable is reflected by an entry in this table having a zero-valued range identifier. |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
JuniProfAssignIfRangeEntry |
|
| juniProfAssignIfRangeEntry |
1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1 |
| An assignment of a profile to an interface/encapsulation/range 3-tuple. |
| OBJECT-TYPE |
|
|
|
| |
JuniProfAssignIfRangeEntry |
|
|
| juniProfAssignIfRangeEncaps |
1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.2 |
| The encapsulated protocol type to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports. If an entry for a specific encapsulation is absent, the profile assigned for the 'any' encapsulation will be used (if that assignment is present in this table). |
| OBJECT-TYPE |
|
|
|
| |
JuniProfileIfEncaps |
|
|
| juniProfAssignIfRangeRangeId |
1.3.6.1.4.1.4874.2.2.25.1.2.2.1.1.3 |
| An application-specific range identifier to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports, distinguished by range identifier. A value of zero should be used for an interface that does not support multiple profile assignments per encapsulation. |
| OBJECT-TYPE |
|
|
|
| |
JuniProfileRangeId |
|
|
| juniProfToIfRangeMapEntry |
1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1 |
| Reports an interface/encapsulation/range 3-tuple assigned to a profile. |
| OBJECT-TYPE |
|
|
|
| |
JuniProfToIfRangeMapEntry |
|
|
| juniProfToIfRangeMapRangeId |
1.3.6.1.4.1.4874.2.2.25.1.2.2.2.1.4 |
| An application-specific range identifier to which the assigned profile pertains. An interface may have zero, one or more profiles assigned for each encapsulation it supports, distinguished by range identifier. |
| OBJECT-TYPE |
|
|
|
| |
JuniProfileRangeId |
|
|
| juniProfileCompliance |
1.3.6.1.4.1.4874.2.2.25.4.1.1 |
| Obsolete compliance statement for systems supporting naming of configuration profiles. This statement became obsolete when the interface profile assignment group was added. |
| MODULE-COMPLIANCE |
|
|
|
| juniProfileCompliance2 |
1.3.6.1.4.1.4874.2.2.25.4.1.2 |
| Obsolete compliance statement for systems supporting naming of configuration profiles and profile assignment to interfaces. This statement became obsolete when support for range indexing of profile assignments was added. |
| MODULE-COMPLIANCE |
|
|
|
| juniProfileGroup |
1.3.6.1.4.1.4874.2.2.25.4.2.1 |
| The basic collection of objects providing management of Profile naming functionality in a Juniper product. |
| OBJECT-GROUP |
|
|
|
| juniProfileIfGroup |
1.3.6.1.4.1.4874.2.2.25.4.2.2 |
| Obsolete collection of objects providing management of Profile assignment to interfaces in a Juniper product. This group became obsolete when support for range indexing of profile assignments was added. |
| OBJECT-GROUP |
|
|
|
| juniProfileIfGroup2 |
1.3.6.1.4.1.4874.2.2.25.4.2.3 |
| The basic collection of objects providing management of Profile assignment to interfaces in a Juniper product. |
| OBJECT-GROUP |
|
|
|
Defined Objects
| JuniProfileIfEncaps |
|
| Encapsulated protocol type. The 'any' value is a wildcard value. The DESCRIPTION clause for an object having this syntax must describe how the 'any' value applies, if at all. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
ip(0), ppp(1), atm1483(11), pppoe(17), bridgedEthernet(19), any(127) |
|
| JuniProfileRangeId |
|
| An application-specific identifier used to distinguish multiple profile assignments on a given interface/encapsulation pair. Not all interface applications support this capability. The semantics of the identifier are governed by the interface application on which a profile is assigned. For example, the ATM AAL5 application defines the semantics for range identifiers used in profile assignments on ATM AAL5 interfaces; and might choose to associate range identifiers with distinct VPI/VCI ranges. The value zero is reserved for use as the range identifier value for profile assignments on interfaces that do not support more than one assignment per encapsulation. |
| TEXTUAL-CONVENTION |
|
|
|
| |
Unsigned32 |
|
|
| JuniProfileNameEntry |
|
| SEQUENCE |
|
|
|
| |
DisplayString as juniProfileNameName |
|
|
| |
RowStatus as juniProfileNameRowStatus |
|
|
| |
Unsigned32 as juniProfileNameId |
|
|
| JuniProfileIdEntry |
|
| SEQUENCE |
|
|
|
| |
Unsigned32 as juniProfileIdId |
|
|
| |
DisplayString as juniProfileIdName |
|
|
| JuniProfAssignIfEntry |
|
| SEQUENCE |
|
|
|
| |
InterfaceIndex as juniProfAssignIfIndex |
|
|
| |
JuniProfileIfEncaps as juniProfAssignIfEncaps |
|
|
| |
RowStatus as juniProfAssignIfRowStatus |
|
|
| |
Unsigned32 as juniProfAssignIfProfileId |
|
|
| JuniProfToIfMapEntry |
|
| SEQUENCE |
|
|
|
| |
Unsigned32 as juniProfToIfMapProfileId |
|
|
| |
InterfaceIndex as juniProfToIfMapIndex |
|
|
| |
JuniProfileIfEncaps as juniProfToIfMapEncaps |
|
|
| JuniProfAssignIfRangeEntry |
|
| SEQUENCE |
|
|
|
| |
InterfaceIndex as juniProfAssignIfRangeIndex |
|
|
| |
JuniProfileIfEncaps as juniProfAssignIfRangeEncaps |
|
|
| |
JuniProfileRangeId as juniProfAssignIfRangeRangeId |
|
|
| |
RowStatus as juniProfAssignIfRangeRowStatus |
|
|
| |
Unsigned32 as juniProfAssignIfRangeProfileId |
|
|
| JuniProfToIfRangeMapEntry |
|
| SEQUENCE |
|
|
|
| |
Unsigned32 as juniProfToIfRangeMapProfileId |
|
|
| |
InterfaceIndex as juniProfToIfRangeMapIndex |
|
|
| |
JuniProfileIfEncaps as juniProfToIfRangeMapEncaps |
|
|
| |
JuniProfileRangeId as juniProfToIfRangeMapRangeId |
|
|