LANOPTICS-SYSTEM-MIB

File: LANOPTICS-SYSTEM-MIB.mib (14706 bytes)

Imported modules

RFC-1212 RFC1155-SMI RFC1213-MIB

Imported symbols

OBJECT-TYPE enterprises IpAddress
DisplayString

Defined Objects

lanOptics 1.3.6.1.4.1.224
OBJECT IDENTIFIER    

lanOpticsSystem 1.3.6.1.4.1.224.2
OBJECT IDENTIFIER    

snSysDirectory 1.3.6.1.4.1.224.2.1
Gives the agent directory content (make DOS DIR command on agent directory).
OBJECT-TYPE    
  DisplayString  

snAgentVersion 1.3.6.1.4.1.224.2.2
Gives the agent major version in the high order word and the minor version in low order word.
OBJECT-TYPE    
  INTEGER  

lanOpticsSystemCMOS 1.3.6.1.4.1.224.2.3
OBJECT IDENTIFIER    

lanOpticsSystemCMOSIp 1.3.6.1.4.1.224.2.3.1
OBJECT IDENTIFIER    

snSysCMOSIpInterfaceTable 1.3.6.1.4.1.224.2.3.1.1
A list of network interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    SnSysCMOSIpInterfaceEntry

snSysCMOSIpInterfaceEntry 1.3.6.1.4.1.224.2.3.1.1.1
An interface entry containing the Ipaddress and net-mask.
OBJECT-TYPE    
  SnSysCMOSIpInterfaceEntry  

snSysCMOSIpIpAddr 1.3.6.1.4.1.224.2.3.1.1.1.1
Gives the interface's IpAddress
OBJECT-TYPE    
  IpAddress  

snSysCMOSIpNetMask 1.3.6.1.4.1.224.2.3.1.1.1.2
Gives the interfaces's netmask
OBJECT-TYPE    
  IpAddress  

snSysCMOSIpDefGw 1.3.6.1.4.1.224.2.3.1.2
Gives the agent's default gateway.
OBJECT-TYPE    
  IpAddress  

snSysCMOSIpTFTPOp 1.3.6.1.4.1.224.2.3.1.3
Gives the TFTP policy: 1 - No TFTP, 2 - Optional, 3 - Always
OBJECT-TYPE    
  INTEGER noTFTP(1), limited(2), continuous(3)  

snSysCMOSIpTFTPAddr 1.3.6.1.4.1.224.2.3.1.4
Gives the TFTP server Ip address.
OBJECT-TYPE    
  IpAddress  

snSysCMOSIpTFTPFileName 1.3.6.1.4.1.224.2.3.1.5
Gives the boot file name at the server (full path).
OBJECT-TYPE    
  DisplayString  

snSysCMOSIpTFTPDrive 1.3.6.1.4.1.224.2.3.1.6
Gives the TFTP operation destination drive (value of ASCII character).
OBJECT-TYPE    
  INTEGER driveA(41), driveB(42), driveC(43), driveD(44)  

lanOpticsSystemCMOSHub 1.3.6.1.4.1.224.2.3.2
OBJECT IDENTIFIER    

snSysCMOSHubSlotConfigTable 1.3.6.1.4.1.224.2.3.2.1
A list of slots entries. Each entry in this table, contains the last 20 operations performed on the slot.
OBJECT-TYPE    
  SEQUENCE OF  
    SnSysCMOSHubSlotConfigEntry

snSysCMOSHubSlotConfigEntry 1.3.6.1.4.1.224.2.3.2.1.1
OBJECT-TYPE    
  SnSysCMOSHubSlotConfigEntry  

snSysSlotLastOperations 1.3.6.1.4.1.224.2.3.2.1.1.1
A description of last 20 operations performed, on the slot
OBJECT-TYPE    
  OCTET STRING  

snSysResetSlotQueue 1.3.6.1.4.1.224.2.3.2.1.1.2
Resets the last 20 operations queue.
OBJECT-TYPE    
  INTEGER  

snSysCMOSHubSaveHubFunctions 1.3.6.1.4.1.224.2.3.2.2
Save (2) /Do not Save (1) Hub managment functions in non-volatile memory.
OBJECT-TYPE    
  INTEGER not-saved(1), saved(2)  

lanOpticsSystemCMOSRPL 1.3.6.1.4.1.224.2.3.3
OBJECT IDENTIFIER    

snSysCMOSRPLMode 1.3.6.1.4.1.224.2.3.3.1
Determine if the image will be loaded through RPL at next boot: RPL off - 1, RPL on - 2.
OBJECT-TYPE    
  INTEGER rpl-off(1), rpl-on(2)  

snSysCMOSFlashMode 1.3.6.1.4.1.224.2.3.3.2
Determine if the image will be loaded from flash memory at next boot : flash on - 2, flash off - 1.
OBJECT-TYPE    
  INTEGER flash-off(1), flash-on(2)  

lanOpticsSystemCMOSSerial 1.3.6.1.4.1.224.2.3.4
OBJECT IDENTIFIER    

snSysCMOSSerialMode 1.3.6.1.4.1.224.2.3.4.1
Determine the serial port usage mode : Proprietary - 1, SLIP - 2, None - 3.
OBJECT-TYPE    
  INTEGER proprietary(1), slip(2), none(3)  

snSysCMOSSerialComSelect 1.3.6.1.4.1.224.2.3.4.2
Determine which COM port is used.
OBJECT-TYPE    
  INTEGER sr-COM1(1), sr-COM2(2)  

snSysCMOSSerialBaudRate 1.3.6.1.4.1.224.2.3.4.3
Determine the serial port baud rate : 1200 - 1, 2400 - 2, 4800 - 3, 9600 - 4, 19200 - 5, 38300 - 6, 57600 - 7
OBJECT-TYPE    
  INTEGER baud1200(1), baud2400(2), baud4800(3), baud9600(4), baud19200(5), baud38300(6), baud57600(7)  

snSysCMOSSerialWordLength 1.3.6.1.4.1.224.2.3.4.4
Determine the data bits length : 7 Bits - 1, 8 Bits -2
OBJECT-TYPE    
  INTEGER bits-7(1), bits-8(2)  

snSysCMOSSerialStopBits 1.3.6.1.4.1.224.2.3.4.5
Determine the number of stop bits; values allowed : 1 Bit - 1, 1.5 Bits - 2, 2 Bits - 3.
OBJECT-TYPE    
  INTEGER bits-1(1), bits-15(2), bits-2(3)  

snSysCMOSSerialParityCheck 1.3.6.1.4.1.224.2.3.4.6
Determine the parity check policy : Even - 1, Odd - 2, None - 3.
OBJECT-TYPE    
  INTEGER even(1), odd(2), none(3)  

lanOpticsSystemCMOSSRAM 1.3.6.1.4.1.224.2.3.5
OBJECT IDENTIFIER    

snSysCMOSSRAMKeepAliveSecInterval 1.3.6.1.4.1.224.2.3.5.1
Determine the interval of the keep alive frame in seconds
OBJECT-TYPE    
  INTEGER  

lanOpticsSystemCMOSSNMP 1.3.6.1.4.1.224.2.3.6
OBJECT IDENTIFIER    

snSysCMOSSNMPCommunitiesNum 1.3.6.1.4.1.224.2.3.6.1
Keeps the number of communities.
OBJECT-TYPE    
  INTEGER  

snSysCMOSSNMPTrapManagersNum 1.3.6.1.4.1.224.2.3.6.2
Keeps the number of managers that traps are send to.
OBJECT-TYPE    
  INTEGER  

snSysCMOSSNMPCommunitiesTable 1.3.6.1.4.1.224.2.3.6.3
A table containing the SNMP communities
OBJECT-TYPE    
  SEQUENCE OF  
    SnSysCMOSSNMPCommunitiesEntry

snSysCMOSSNMPCommunitiesEntry 1.3.6.1.4.1.224.2.3.6.3.1
An entry community info
OBJECT-TYPE    
  SnSysCMOSSNMPCommunitiesEntry  

snSysCMOSSNMPCommunityName 1.3.6.1.4.1.224.2.3.6.3.1.1
This variable will give the community name.
OBJECT-TYPE    
  DisplayString  

snSysCMOSSNMPCommunityPrivs 1.3.6.1.4.1.224.2.3.6.3.1.2
This variable will give the community privilages: Read Only - 1, Read/Write - 2.
OBJECT-TYPE    
  INTEGER read-Only(1), read-Write(2)  

snSysCMOSSNMPTrapCommunitiesTable 1.3.6.1.4.1.224.2.3.6.4
A table containing the SNMP communities
OBJECT-TYPE    
  SEQUENCE OF  
    SnSysCMOSSNMPTrapCommunitiesEntry

snSysCMOSSNMPTrapCommunitiesEntry 1.3.6.1.4.1.224.2.3.6.4.1
An entry of trap IP destinations.
OBJECT-TYPE    
  SnSysCMOSSNMPTrapCommunitiesEntry  

snSysCMOSSNMPTrapCommunityIpAddr 1.3.6.1.4.1.224.2.3.6.4.1.1
This variable gives a manager IP address for traps destination.
OBJECT-TYPE    
  IpAddress  

lanOpticsSystemCMOSACCESS 1.3.6.1.4.1.224.2.3.7
OBJECT IDENTIFIER    

snSysCMOSACCESSOffset 1.3.6.1.4.1.224.2.3.7.1
Gives the offset in the CMOS array. For internal use only
OBJECT-TYPE    
  INTEGER  

snSysCMOSACCESSLength 1.3.6.1.4.1.224.2.3.7.2
Gives the length (max 512) in the CMOS array. For internal use only,
OBJECT-TYPE    
  INTEGER  

snSysCMOSACCESSSequence 1.3.6.1.4.1.224.2.3.7.3
Gives a sequnce of bytes from CMOS array. For internal use only
OBJECT-TYPE    
  INTEGER  

lanOpticsSystemCMOSBRDG 1.3.6.1.4.1.224.2.3.8
OBJECT IDENTIFIER    

snSysCMOSBRDGradius 1.3.6.1.4.1.224.2.3.8.1
Sets the discovery radius. Value = 0-7. 0=disable bridge.
OBJECT-TYPE    
  INTEGER  

snSysCMOSBRDGlinkNumber 1.3.6.1.4.1.224.2.3.8.2
Sets the Link number. Value = 0-3.
OBJECT-TYPE    
  INTEGER 0..3  

snSysCMOSBRDGpassword 1.3.6.1.4.1.224.2.3.8.3
Sets the bridge password. 8 characters .
OBJECT-TYPE    
  DisplayString  

Defined Objects

SnSysCMOSIpInterfaceEntry  
SEQUENCE    
  IpAddress as snSysCMOSIpIpAddr  
  IpAddress as snSysCMOSIpNetMask  

SnSysCMOSHubSlotConfigEntry  
SEQUENCE    
  OCTET STRING as snSysSlotLastOperations  
  INTEGER as snSysResetSlotQueue  

SnSysCMOSSNMPCommunitiesEntry  
SEQUENCE    
  DisplayString as snSysCMOSSNMPCommunityName  
  INTEGER as snSysCMOSSNMPCommunityPrivs  

SnSysCMOSSNMPTrapCommunitiesEntry  
SEQUENCE    
  IpAddress as snSysCMOSSNMPTrapCommunityIpAddr