LANPLEX-MIB-1-2-9

File: LANPLEX-MIB-1-2-9.mib (103938 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212
RFC-1215

Imported symbols

enterprises Counter NetworkAddress
DisplayString OBJECT-TYPE TRAP-TYPE

Defined Objects

synernetics 1.3.6.1.4.1.114
OBJECT IDENTIFIER    

lanplex 1.3.6.1.4.1.114.1
OBJECT IDENTIFIER    

lanplexMib 1.3.6.1.4.1.114.1.1
OBJECT IDENTIFIER    

chassis 1.3.6.1.4.1.114.1.1.1
OBJECT IDENTIFIER    

lpSlotInsertEvent 1.3.6.1.4.1.114.1.1.1
The SNMP trap that is generated when a board is inserted into a particular slot in the chassis.
TRAP-TYPE    
  lpSlotIndex  
  lpSlotBoardType  
  lpSlotBoardRevision  

chassisId 1.3.6.1.4.1.114.1.1.1.1
The unique identifier assigned to this station during manufacturing.
OBJECT-TYPE    
  INTEGER  

chassisType 1.3.6.1.4.1.114.1.1.1.2
The type of the LANplex chassis.
OBJECT-TYPE    
  INTEGER other(1), tweleveSlot(2), fourSlot(3)  

chassisRevision 1.3.6.1.4.1.114.1.1.1.3
The revision number of the LANplex chassis.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

chassisName 1.3.6.1.4.1.114.1.1.1.4
The text string describing this chassis.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

chassisNameAbbrev 1.3.6.1.4.1.114.1.1.1.5
The text string describing the generic name for this chassis.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

chassisManufacturer 1.3.6.1.4.1.114.1.1.1.6
The text string describing the manufacturer of this chassis.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

chassisSlotCount 1.3.6.1.4.1.114.1.1.1.7
The number of slots in the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

chassisBuildTime 1.3.6.1.4.1.114.1.1.1.8
The build time of the LANplex system software.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

chassisSoftwareRevision 1.3.6.1.4.1.114.1.1.1.9
The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental idenrtifier.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

chassisControlPanelColumns 1.3.6.1.4.1.114.1.1.1.10
The number of columns in the control panel display.
OBJECT-TYPE    
  INTEGER  

chassisControlPanelLines 1.3.6.1.4.1.114.1.1.1.11
The number of lines in the control panel display.
OBJECT-TYPE    
  INTEGER  

chassisControlPanelText 1.3.6.1.4.1.114.1.1.1.12
The currently displayed text in the control panel display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..128)  

chassisAction 1.3.6.1.4.1.114.1.1.1.13
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LANplex system.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

slot 1.3.6.1.4.1.114.1.1.2
OBJECT IDENTIFIER    

lpSlotExtractEvent 1.3.6.1.4.1.114.1.1.2
The SNMP trap that is generated when a board is extracted from a particular slot in the chassis.
TRAP-TYPE    
  lpSlotIndex  

slotTable 1.3.6.1.4.1.114.1.1.2.1
A list of slot entries. A single instance of this object exists for each slot in the LANplex chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotEntry

slotEntry 1.3.6.1.4.1.114.1.1.2.1.1
A slot entry contains information common to a given slot within a LANplex system Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table.
OBJECT-TYPE    
  SlotEntry  

slotIndex 1.3.6.1.4.1.114.1.1.2.1.1.1
The physical slot number of this slot within the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

slotBoardType 1.3.6.1.4.1.114.1.1.2.1.1.2
The type of board residing in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), emptySlot(2), spm(3), feam(4), fcm(5), eem(6), esm(7), fcm2(8)  

slotBoardRevision 1.3.6.1.4.1.114.1.1.2.1.1.3
The revision number of the board in this slot.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

slotBoardStatus 1.3.6.1.4.1.114.1.1.2.1.1.4
The status of the board in this slot.
OBJECT-TYPE    
  INTEGER notPresent(1), testing(2), offline(3), online(4)  

slotBoardName 1.3.6.1.4.1.114.1.1.2.1.1.5
The text string describing this board type.
OBJECT-TYPE    
  DisplayString SIZE(0..256)  

slotBoardNameAbbrev 1.3.6.1.4.1.114.1.1.2.1.1.6
The abbreviation used to describe this board type.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

slotBoardAction 1.3.6.1.4.1.114.1.1.2.1.1.7
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics.
OBJECT-TYPE    
  INTEGER other(1), runDiagnostics(2)  

spm 1.3.6.1.4.1.114.1.1.3
OBJECT IDENTIFIER    

lpBridgeAddressThresholdEvent 1.3.6.1.4.1.114.1.1.3
The SNMP trap that is generated when the number of addresses stored in the bridge reaches lpBridgeAddressThreshold.
TRAP-TYPE    
  lpBridgeIndex  
  lpBridgeBaseSlotIndex  

spmTable 1.3.6.1.4.1.114.1.1.3.1
A list of System Processor Module (SPM) entries. An entry exists for each Slot Table Entry whose board type is SPM. This table is indexed by the physical slot number of this SPM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table.
OBJECT-TYPE    
  SEQUENCE OF  
    SPMEntry

spmEntry 1.3.6.1.4.1.114.1.1.3.1.1
A SPM entry contains information common to a single System Processor Module (SPM) within a LANplex system.
OBJECT-TYPE    
  SPMEntry  

spmSlotIndex 1.3.6.1.4.1.114.1.1.3.1.1.1
The physical slot number of this slot within the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

spmEthernetPortCount 1.3.6.1.4.1.114.1.1.3.1.1.2
The number of ethernet ports on this board.
OBJECT-TYPE    
  INTEGER  

spmBaseEthernetPortIndex 1.3.6.1.4.1.114.1.1.3.1.1.3
The system-wide index for the first ethernet port on this board.
OBJECT-TYPE    
  INTEGER  

feam 1.3.6.1.4.1.114.1.1.4
OBJECT IDENTIFIER    

feamTable 1.3.6.1.4.1.114.1.1.4.1
A list of FDDI Enterprise Access Module (FEAM) entries. An entry exists for each Slot Table Entry whose board type is FEAM. This table is indexed by the physical slot number of this FEAM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table.
OBJECT-TYPE    
  SEQUENCE OF  
    FEAMEntry

feamEntry 1.3.6.1.4.1.114.1.1.4.1.1
A FEAM entry contains information common to a single FDDI Enterprise Access Module (FEAM) within a LANplex system.
OBJECT-TYPE    
  FEAMEntry  

feamSlotIndex 1.3.6.1.4.1.114.1.1.4.1.1.1
The physical slot number of this slot within the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

feamMACCount 1.3.6.1.4.1.114.1.1.4.1.1.2
The number of FDDI MAC's present on this board.
OBJECT-TYPE    
  INTEGER  

feamBaseMACIndex 1.3.6.1.4.1.114.1.1.4.1.1.3
The system-wide index of the first FDDI MAC on this board. Additional MAC's on this board will have consecutively increasing MAC indices following this index.
OBJECT-TYPE    
  INTEGER  

feamPortCount 1.3.6.1.4.1.114.1.1.4.1.1.4
The number of FDDI ports present on this board.
OBJECT-TYPE    
  INTEGER  

feamBasePortIndex 1.3.6.1.4.1.114.1.1.4.1.1.5
The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing Port indices following this index.
OBJECT-TYPE    
  INTEGER  

fcm 1.3.6.1.4.1.114.1.1.5
OBJECT IDENTIFIER    

fcmTable 1.3.6.1.4.1.114.1.1.5.1
A list of FDDI Concentration Module (FCM) entries. An entry exists for each Slot Table Entry whose board type is FCM. This table is indexed by the physical slot number of this FCM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table.
OBJECT-TYPE    
  SEQUENCE OF  
    FCMEntry

fcmEntry 1.3.6.1.4.1.114.1.1.5.1.1
An FCM entry contains information common to a single FDDI Concentration Module (FCM) within a LANplex system.
OBJECT-TYPE    
  FCMEntry  

fcmSlotIndex 1.3.6.1.4.1.114.1.1.5.1.1.1
The physical slot number of this slot within the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

fcmPortCount 1.3.6.1.4.1.114.1.1.5.1.1.2
The number of FDDI ports present on this board.
OBJECT-TYPE    
  INTEGER  

fcmBasePortIndex 1.3.6.1.4.1.114.1.1.5.1.1.3
The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing Port indices following this index.
OBJECT-TYPE    
  INTEGER  

port 1.3.6.1.4.1.114.1.1.6
OBJECT IDENTIFIER    

lpSystemOverTemperatureEvent 1.3.6.1.4.1.114.1.1.6
The SNMP trap that is generated when the system temperature exceeds a certain threshold.
TRAP-TYPE    

portTable 1.3.6.1.4.1.114.1.1.6.1
A list of port entries. A single instance of this object exists for each port (excluding ethernet ports) in the LANplex system. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available either via the fddiPort group or the enetPort group.
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.114.1.1.6.1.1
A Port entry contains information common to a particular port located on a particular board within the LANplex system.
OBJECT-TYPE    
  PortEntry  

portSlotIndex 1.3.6.1.4.1.114.1.1.6.1.1.1
The physical slot number of this slot within the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

portIndex 1.3.6.1.4.1.114.1.1.6.1.1.2
The index of the port on a particular slot.
OBJECT-TYPE    
  INTEGER  

portLabel 1.3.6.1.4.1.114.1.1.6.1.1.3
An ASCII text string describing this port.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

eem 1.3.6.1.4.1.114.1.1.7
OBJECT IDENTIFIER    

lpSlotOverTemperatureEvent 1.3.6.1.4.1.114.1.1.7
The SNMP trap that is generated when the temperature of a board in a particular slot exceeds a certain threshold.
TRAP-TYPE    
  lpSlotIndex  
  lpSlotBoardType  
  lpSlotBoardRevision  
  lpSlotBoardStatus  

eemTable 1.3.6.1.4.1.114.1.1.7.1
A list of Ethernet Express Module (EEM) entries. An entry exists for each Slot Table Entry whose board type is EEM. This table is indexed by the physical slot number of this EEM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available either via the slot group or the express group.
OBJECT-TYPE    
  SEQUENCE OF  
    EEMEntry

eemEntry 1.3.6.1.4.1.114.1.1.7.1.1
An EEM entry contains information common to a single Ethernet Express Module (EEM) within a LANplex system.
OBJECT-TYPE    
  EEMEntry  

eemSlotIndex 1.3.6.1.4.1.114.1.1.7.1.1.1
The physical slot number of this slot within the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

eemFddiMACCount 1.3.6.1.4.1.114.1.1.7.1.1.2
The number of FDDI MAC's present on this board.
OBJECT-TYPE    
  INTEGER  

eemBaseFddiMACIndex 1.3.6.1.4.1.114.1.1.7.1.1.3
The system-wide index of the first FDDI MAC on this board. Additional FDDI MAC's on this board will have consecutively increasing MAC indices following this index.
OBJECT-TYPE    
  INTEGER  

eemEthernetPortCount 1.3.6.1.4.1.114.1.1.7.1.1.4
The number of Ethernet ports present on this board.
OBJECT-TYPE    
  INTEGER  

eemBaseEthernetPortIndex 1.3.6.1.4.1.114.1.1.7.1.1.5
The system-wide index of the first ethernet port on this board. Additional ports on this board will have consecutively increasing Port indices following this index.
OBJECT-TYPE    
  INTEGER  

eemAddressThreshold 1.3.6.1.4.1.114.1.1.7.1.1.6
A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached the event eemAddressThresholdEvent is generated.
OBJECT-TYPE    
  INTEGER  

eemFddiMAC 1.3.6.1.4.1.114.1.1.8
OBJECT IDENTIFIER    

lpPowerSupplyFailureEvent 1.3.6.1.4.1.114.1.1.8
The SNMP trap that is generated when a power supply unit fails in the system.
TRAP-TYPE    
  lpPowerSupplyIndex  
  lpPowerSupplyLocation  
  lpPowerSupplyLastFailure  
  lpSystemPowerSupplyCount  

eemFddiMACTable 1.3.6.1.4.1.114.1.1.8.1
A list of EEM FDDI MAC entries. The entries may not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressFddiPort group.
OBJECT-TYPE    
  SEQUENCE OF  
    EEMFddiMACEntry

eemFddiMACEntry 1.3.6.1.4.1.114.1.1.8.1.1
An EEM FDDI MAC entry contains information common to an FDDI MAC located on an EEM within a LANplex system.
OBJECT-TYPE    
  EEMFddiMACEntry  

eemFddiSlotIndex 1.3.6.1.4.1.114.1.1.8.1.1.1
The physical slot number of this board.
OBJECT-TYPE    
  INTEGER  

eemFddiMACIndex 1.3.6.1.4.1.114.1.1.8.1.1.2
A unique value for each FDDI MAC on this board.
OBJECT-TYPE    
  INTEGER  

eemFddiMACForwardedCts 1.3.6.1.4.1.114.1.1.8.1.1.3
A counter indicating the number of frames forwarded by a MAC from an ethernet port to the FDDI network.
OBJECT-TYPE    
  Counter  

eemFddiMACDroppedCts 1.3.6.1.4.1.114.1.1.8.1.1.4
A counter indicating the number of frames that were dropped by a MAC due to local resource limitation or unknown destination MAC address.
OBJECT-TYPE    
  Counter  

eemEthernetPort 1.3.6.1.4.1.114.1.1.9
OBJECT IDENTIFIER    

eemEthernetPortTable 1.3.6.1.4.1.114.1.1.9.1
A list of EEM Ethernet Express Port entries. The slot indices may not be consecutive. The MAC indices will be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressEthernetPort group.
OBJECT-TYPE    
  SEQUENCE OF  
    EEMEthernetPortEntry

eemEthernetPortEntry 1.3.6.1.4.1.114.1.1.9.1.1
An EEM Ethernet Express Port entry contains information common to an Ethenet Port located on an Ethernet Express Module (EEM) within a LANplex system.
OBJECT-TYPE    
  EEMEthernetPortEntry  

eemEthernetPortSlotIndex 1.3.6.1.4.1.114.1.1.9.1.1.1
The physical slot number of the slot containing this port within the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

eemEthernetPortIndex 1.3.6.1.4.1.114.1.1.9.1.1.2
The index of the port on a particular EEM board. This index ranges from 1 to eemEthernetPortCount.
OBJECT-TYPE    
  INTEGER  

eemEthernetPortLabel 1.3.6.1.4.1.114.1.1.9.1.1.3
An ASCII text string describing this ethernet port.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

eemEthernetPortForwardedCts 1.3.6.1.4.1.114.1.1.9.1.1.4
A counter indicating the number of frames forwarded from this ethernet port on to the FDDI network.
OBJECT-TYPE    
  Counter  

eemEthernetPortDroppedCts 1.3.6.1.4.1.114.1.1.9.1.1.5
A counter indicating the numer of frames received on this port that were dropped due to the fact that the destination MAC address was determined to be on the same ethernet segment as the source MAC address. .
OBJECT-TYPE    
  Counter  

eemEthernetPortUTurnCts 1.3.6.1.4.1.114.1.1.9.1.1.6
A counter indicating the number of frames received on this ethernet port and directed to another ethernet port.
OBJECT-TYPE    
  Counter  

eemEthernetPortState 1.3.6.1.4.1.114.1.1.9.1.1.7
The state of the Ethernet Express port.
OBJECT-TYPE    
  INTEGER onlineActive(1), onlineInactive(2), offline(3)  

eemEthernetPortAction 1.3.6.1.4.1.114.1.1.9.1.1.8
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list.
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

eemMACAddress 1.3.6.1.4.1.114.1.1.10
OBJECT IDENTIFIER    

eemEthernetMACAddressTable 1.3.6.1.4.1.114.1.1.10.1
A list of EEM Ethernet Express Remote MAC Address entries. The slot indices may not be consecutive. The port indices will be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressEthernetPort group.
OBJECT-TYPE    
  SEQUENCE OF  
    EEMEthernetMACAddressEntry

eemEthernetMACAddressEntry 1.3.6.1.4.1.114.1.1.10.1.1
A collection of information describing a remote Ethernet MAC detected to be attached to an Ethernet Express port.
OBJECT-TYPE    
  EEMEthernetMACAddressEntry  

eemEthernetMACAddressSlotIndex 1.3.6.1.4.1.114.1.1.10.1.1.1
The physical slot number of the slot containing this EEM within the LANplex chassis.
OBJECT-TYPE    
  INTEGER  

eemEthernetMACAddressPortIndex 1.3.6.1.4.1.114.1.1.10.1.1.2
The port index of this address entry within the table. This index ranges from 1 to eemEthernetPortCount.
OBJECT-TYPE    
  INTEGER  

eemEthernetMACAddressIndex 1.3.6.1.4.1.114.1.1.10.1.1.3
The index of this address entry within the table.
OBJECT-TYPE    
  INTEGER  

eemEthernetMACAddressType 1.3.6.1.4.1.114.1.1.10.1.1.4
This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table.
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

eemEthernetMACAddressRemoteAddress 1.3.6.1.4.1.114.1.1.10.1.1.5
The remote MAC address detected on this Ethernet Express port.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

eemEthernetMACAddressIsStatic 1.3.6.1.4.1.114.1.1.10.1.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned on this port.
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

eemEthernetMACAddressStaticPort 1.3.6.1.4.1.114.1.1.10.1.1.7
If the object eemEthernetMACAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured.
OBJECT-TYPE    
  INTEGER  

eemEthernetMACAddressAge 1.3.6.1.4.1.114.1.1.10.1.1.8
This object indicates the time elapsed since this MAC address was added to this port's address table.
OBJECT-TYPE    
  INTEGER  

lpSystem 1.3.6.1.4.1.114.1.1.11
OBJECT IDENTIFIER    

lpSystemId 1.3.6.1.4.1.114.1.1.11.1
The unique identifier assigned to this system during manufacturing.
OBJECT-TYPE    
  INTEGER  

lpSystemType 1.3.6.1.4.1.114.1.1.11.2
The type of the LANplex system.
OBJECT-TYPE    
  INTEGER other(1), tweleveSlot(2), fourSlot(3)  

lpSystemName 1.3.6.1.4.1.114.1.1.11.3
The text string describing this system.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

lpSystemManufacturer 1.3.6.1.4.1.114.1.1.11.4
The text string describing the manufacturer of this system.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

lpSystemBackplaneRevision 1.3.6.1.4.1.114.1.1.11.5
The revision level of the system backplane. Bits 6 and 7 indicate the artwork revision. Bits 0 through 5 indicate the rework level.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSystemSlotCount 1.3.6.1.4.1.114.1.1.11.6
The number of slots in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemMemorySize 1.3.6.1.4.1.114.1.1.11.7
The amount of memory (RAM), in bytes, present on the system processor board.
OBJECT-TYPE    
  INTEGER  

lpSystemFlashMemorySize 1.3.6.1.4.1.114.1.1.11.8
The amount of flash memory, in bytes, present on the system processor board.
OBJECT-TYPE    
  INTEGER  

lpSystemNvMemorySize 1.3.6.1.4.1.114.1.1.11.9
The amount of non-volatile memory, in bytes, present on the system processor board.
OBJECT-TYPE    
  INTEGER  

lpSystemSoftwareRevision 1.3.6.1.4.1.114.1.1.11.10
The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental identifier.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

lpSystemBuildTime 1.3.6.1.4.1.114.1.1.11.11
The build time of the system software.
OBJECT-TYPE    
  DisplayString SIZE(0..128)  

lpSystemControlPanelHardwareRevision 1.3.6.1.4.1.114.1.1.11.12
An 8-bit value specifying the revision level of the control panel hardware.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSystemControlPanelSoftwareRevision 1.3.6.1.4.1.114.1.1.11.13
An 8-bit value specifying the revision level of the control panel software.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSystemControlPanelLines 1.3.6.1.4.1.114.1.1.11.14
The number of lines in the control panel display.
OBJECT-TYPE    
  INTEGER  

lpSystemControlPanelColumns 1.3.6.1.4.1.114.1.1.11.15
The number of columns in the control panel display.
OBJECT-TYPE    
  INTEGER  

lpSystemControlPanelText 1.3.6.1.4.1.114.1.1.11.16
The currently displayed text in the control panel display.
OBJECT-TYPE    
  OCTET STRING SIZE(0..128)  

lpSystemFddiMacCount 1.3.6.1.4.1.114.1.1.11.17
The number of FDDI MAC's present in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemFddiPortCount 1.3.6.1.4.1.114.1.1.11.18
The number of FDDI ports present in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemEthernetPortCount 1.3.6.1.4.1.114.1.1.11.19
The number of ethernet ports present in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemExpressFunctionCount 1.3.6.1.4.1.114.1.1.11.20
The number of Ethernet Express functions present in the system. Curently this value is equal to the number of Express boards present in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemExpressFddiPortCount 1.3.6.1.4.1.114.1.1.11.21
The number of Ethernet Express FDDI ports present in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemExpressEthernetPortCount 1.3.6.1.4.1.114.1.1.11.22
The number of Ethernet Express ethernet ports present in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemPowerSupplyCount 1.3.6.1.4.1.114.1.1.11.23
The number of power supply units present in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemAction 1.3.6.1.4.1.114.1.1.11.24
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LANplex system.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

lpSystemBridgeFunctionCount 1.3.6.1.4.1.114.1.1.11.25
The number of bridge functions present in the system. Curently this value is equal to the sum of the number of Express and Switching modules in the system.
OBJECT-TYPE    
  INTEGER  

lpSystemSmtProxyTimeoutBase 1.3.6.1.4.1.114.1.1.11.26
The initial timeout value, in seconds, before the SMT proxy attempts to backoff and retry. Since the SMT proxy will attempt three retries before determining that the proxied station is not answering, with the timeout doubling for each retry, the total time for a request to time out is equal to seven times the base timeout value.
OBJECT-TYPE    
  INTEGER 1..10  

lpSystemSmtProxyEvents 1.3.6.1.4.1.114.1.1.11.27
This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy will generate traps for all SMT events, those that occur locally, and those that occur at other stations. If disabled, the SMT proxy will only generate traps for events which occur locally. The default value for this object is enabled(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

lpSlot 1.3.6.1.4.1.114.1.1.12
OBJECT IDENTIFIER    

lpSlotTable 1.3.6.1.4.1.114.1.1.12.1
A list of slot entries. A single instance of this object exists for each slot in the LANplex system.
OBJECT-TYPE    
  SEQUENCE OF  
    LpSlotEntry

lpSlotEntry 1.3.6.1.4.1.114.1.1.12.1.1
A slot entry contains information common to a given slot within a LANplex system.
OBJECT-TYPE    
  LpSlotEntry  

lpSlotIndex 1.3.6.1.4.1.114.1.1.12.1.1.1
The physical slot number of this slot within the system.
OBJECT-TYPE    
  INTEGER  

lpSlotBoardType 1.3.6.1.4.1.114.1.1.12.1.1.2
The type of board residing in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), emptySlot(2), spm(3), feam(4), fcm(5), eem(6), esm(7), fcm2(8)  

lpSlotBoardRevision 1.3.6.1.4.1.114.1.1.12.1.1.3
The revision number of the board in this slot.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

lpSlotBoardStatus 1.3.6.1.4.1.114.1.1.12.1.1.4
The status of the board in this slot.
OBJECT-TYPE    
  INTEGER notPresent(1), testing(2), offline(3), online(4)  

lpSlotBoardName 1.3.6.1.4.1.114.1.1.12.1.1.5
The text string describing this board.
OBJECT-TYPE    
  DisplayString SIZE(0..256)  

lpSlotBoardNameAbbrev 1.3.6.1.4.1.114.1.1.12.1.1.6
The abbreviation used to describe this board.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

lpSlotFddiMacCount 1.3.6.1.4.1.114.1.1.12.1.1.7
The number of FDDI MAC's present in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotFddiMacBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.8
The index of the first FDDI MAC in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotFddiPortCount 1.3.6.1.4.1.114.1.1.12.1.1.9
The number of FDDI ports present in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotFddiPortBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.10
The index of the first FDDI port in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotEthernetPortCount 1.3.6.1.4.1.114.1.1.12.1.1.11
The number of ethernet ports present in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotEthernetPortBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.12
The index of the first ethernet port in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotExpressFunctionCount 1.3.6.1.4.1.114.1.1.12.1.1.13
The number of Express functions present in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotExpressFunctionBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.14
The index of the first Express function in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotExpressFddiPortCount 1.3.6.1.4.1.114.1.1.12.1.1.15
The number of Express FDDI ports present in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotExpressFddiPortBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.16
The index of the first Express FDDI port in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotExpressEthernetPortCount 1.3.6.1.4.1.114.1.1.12.1.1.17
The number of Express ethernet ports present in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotExpressEthernetPortBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.18
The index of the first Express ethernet port in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotBoardAction 1.3.6.1.4.1.114.1.1.12.1.1.19
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics.
OBJECT-TYPE    
  INTEGER other(1), runDiagnostics(2)  

lpSlotBridgeFunctionCount 1.3.6.1.4.1.114.1.1.12.1.1.20
The number of bridge functions present in this slot.
OBJECT-TYPE    
  INTEGER  

lpSlotBridgeFunctionBaseIndex 1.3.6.1.4.1.114.1.1.12.1.1.21
The index of the first bridge function in this slot.
OBJECT-TYPE    
  INTEGER  

lpFddiMac 1.3.6.1.4.1.114.1.1.13
OBJECT IDENTIFIER    

lpFddiMacTable 1.3.6.1.4.1.114.1.1.13.1
A list of FDDI MAC entries. A single instance of this object exists for each FDDI MAC present in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFddiMacEntry

lpFddiMacEntry 1.3.6.1.4.1.114.1.1.13.1.1
An FDDI MAC entry contains information common to a particular FDDI MAC within the system.
OBJECT-TYPE    
  LpFddiMacEntry  

lpFddiMacIndex 1.3.6.1.4.1.114.1.1.13.1.1.1
A unique value for each FDDI MAC in the system. The MAC identified by a particular value of this index is the same MAC as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

lpFddiMacSlotIndex 1.3.6.1.4.1.114.1.1.13.1.1.2
The slot number corresponding to the physical location of this MAC.
OBJECT-TYPE    
  INTEGER  

lpFddiMacLocalIndex 1.3.6.1.4.1.114.1.1.13.1.1.3
The index of this MAC relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lpFddiMacByteReceiveRate 1.3.6.1.4.1.114.1.1.13.1.1.4
The average number of bytes received per second by this MAC during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lpFddiMacPeakByteReceiveRate 1.3.6.1.4.1.114.1.1.13.1.1.5
The peak value of lpFddiMacByteReceiveRate for this MAC since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lpFddiMacFrameReceiveRate 1.3.6.1.4.1.114.1.1.13.1.1.6
The average number of frames received per second by this MAC during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lpFddiMacPeakFrameReceiveRate 1.3.6.1.4.1.114.1.1.13.1.1.7
The peak value of lpFddiMacFrameReceiveRate for this MAC since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lpFddiMacByteTransmitRate 1.3.6.1.4.1.114.1.1.13.1.1.8
The average number of bytes transmitted per second by this MAC during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lpFddiMacPeakByteTransmitRate 1.3.6.1.4.1.114.1.1.13.1.1.9
The peak value of lpFddiMacByteTransmitRate for this MAC since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lpFddiMacFrameTransmitRate 1.3.6.1.4.1.114.1.1.13.1.1.10
The average number of frames transmitted per second by this MAC during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lpFddiMacPeakFrameTransmitRate 1.3.6.1.4.1.114.1.1.13.1.1.11
The peak value of lpFddiMacFrameTransmitRate for this MAC since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lpFddiMacReceiveMulticastThreshold 1.3.6.1.4.1.114.1.1.13.1.1.12
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate.
OBJECT-TYPE    
  INTEGER  

lpFddiMacBeaconHistory 1.3.6.1.4.1.114.1.1.13.1.1.13
This object gives a history of the most recent beacon information received on this MAC. It can contain up to a maximum of eight records. Each record is of the form: source MAC: 6 bytes beacon data length: 2 bytes. beacon data: 0-16 bytes.
OBJECT-TYPE    
  OCTET STRING SIZE(0..256)  

lpEthernetPort 1.3.6.1.4.1.114.1.1.14
OBJECT IDENTIFIER    

lpEthernetPortTable 1.3.6.1.4.1.114.1.1.14.1
A list of ethernet port entries. A single instance of this object exists for each ethernet port present in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    LpEthernetPortEntry

lpEthernetPortEntry 1.3.6.1.4.1.114.1.1.14.1.1
An ethernet port entry contains information common to a particular ethernet port within the system.
OBJECT-TYPE    
  LpEthernetPortEntry  

lpEthernetPortIndex 1.3.6.1.4.1.114.1.1.14.1.1.1
A unique value for each ethernet port in the system. The port identified by a particular value of this index is the same port as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortSlotIndex 1.3.6.1.4.1.114.1.1.14.1.1.2
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortLocalIndex 1.3.6.1.4.1.114.1.1.14.1.1.3
The index of this port relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortLabel 1.3.6.1.4.1.114.1.1.14.1.1.4
An ASCII text string describing this port.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

lpEthernetPortChipsetType 1.3.6.1.4.1.114.1.1.14.1.1.5
The type of chipset used to implement this port.
OBJECT-TYPE    
  INTEGER other(1), chipsetAMD79900(2), chipsetIntel82586(3), chipsetIntel82596(4), chipsetSEEQ8003(5), chipsetNational8390(6), chipsetNationalSonic(7), chipsetFujitsu86950(8)  

lpEthernetPortLinkStatus 1.3.6.1.4.1.114.1.1.14.1.1.6
The current value of the link status for this port.
OBJECT-TYPE    
  INTEGER active(1), inActive(2)  

lpEthernetPortByteReceiveRate 1.3.6.1.4.1.114.1.1.14.1.1.7
The average number of bytes received per second by this port during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortPeakByteReceiveRate 1.3.6.1.4.1.114.1.1.14.1.1.8
The peak value of lpEthernetPortByteReceiveRate for this port since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortFrameReceiveRate 1.3.6.1.4.1.114.1.1.14.1.1.9
The average number of frames received per second by this port during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortPeakFrameReceiveRate 1.3.6.1.4.1.114.1.1.14.1.1.10
The peak value of lpEthernetPortFrameReceiveRate for this port since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortByteTransmitRate 1.3.6.1.4.1.114.1.1.14.1.1.11
The average number of bytes transmitted per second by this port during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortPeakByteTransmitRate 1.3.6.1.4.1.114.1.1.14.1.1.12
The peak value of lpEthernetPortByteTransmitRate for this port since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortFrameTransmitRate 1.3.6.1.4.1.114.1.1.14.1.1.13
The average number of frames transmitted per second by this port during the most recent sampling period.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortPeakFrameTransmitRate 1.3.6.1.4.1.114.1.1.14.1.1.14
The peak value of lpEthernetPortFrameTransmitRate for this port since the system was last initialized.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortReceiveMulticastThreshold 1.3.6.1.4.1.114.1.1.14.1.1.15
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is four seconds. The default value for this object is zero which implies an infinite rate.
OBJECT-TYPE    
  INTEGER  

lpEthernetPortType 1.3.6.1.4.1.114.1.1.14.1.1.16
Specific description of this port's type.
OBJECT-TYPE    
  INTEGER telco10BaseT(1), rj4510BaseT(2), foirl(3), aui(4), other(5)  

lpFddiPort 1.3.6.1.4.1.114.1.1.15
OBJECT IDENTIFIER    

lpFddiPortTable 1.3.6.1.4.1.114.1.1.15.1
A list of FDDI port entries. A single instance of this object exists for each FDDI port in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    LpFddiPortEntry

lpFddiPortEntry 1.3.6.1.4.1.114.1.1.15.1.1
A Port entry contains information common to a particular FDDI port in the system.
OBJECT-TYPE    
  LpFddiPortEntry  

lpFddiPortIndex 1.3.6.1.4.1.114.1.1.15.1.1.1
A unique value for each FDDI port in the system. It's value ranges between 1 and the value of lpSystemFddiPortCount.
OBJECT-TYPE    
  INTEGER  

lpFddiPortSlotIndex 1.3.6.1.4.1.114.1.1.15.1.1.2
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lpFddiPortLocalIndex 1.3.6.1.4.1.114.1.1.15.1.1.3
The index of this port relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lpFddiPortLabel 1.3.6.1.4.1.114.1.1.15.1.1.4
An ASCII text string describing this port.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

lpExpress 1.3.6.1.4.1.114.1.1.16
OBJECT IDENTIFIER    

lpExpressTable 1.3.6.1.4.1.114.1.1.16.1
A list of Express function entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpExpressEntry

lpExpressEntry 1.3.6.1.4.1.114.1.1.16.1.1
An Express entry contains information common to a particular Express function in a given system.
OBJECT-TYPE    
  LpExpressEntry  

lpExpressIndex 1.3.6.1.4.1.114.1.1.16.1.1.1
A unique value for each Express function in the system. It's value ranges between 1 and the value of lpSystemExpressFunctionCount.
OBJECT-TYPE    
  INTEGER  

lpExpressSlotIndex 1.3.6.1.4.1.114.1.1.16.1.1.2
The slot number corresponding to the physical location of this function.
OBJECT-TYPE    
  INTEGER  

lpExpressLocalIndex 1.3.6.1.4.1.114.1.1.16.1.1.3
The index of this function relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lpExpressAddressThreshold 1.3.6.1.4.1.114.1.1.16.1.1.4
A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached, the event lpEemAddressThresholdEvent is generated.
OBJECT-TYPE    
  INTEGER  

lpExpressFddiPort 1.3.6.1.4.1.114.1.1.17
OBJECT IDENTIFIER    

lpExpressFddiPortTable 1.3.6.1.4.1.114.1.1.17.1
A list of Express FDDI port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpExpressFddiPortEntry

lpExpressFddiPortEntry 1.3.6.1.4.1.114.1.1.17.1.1
A Port entry contains information for a particular Express FDDI port in a given system.
OBJECT-TYPE    
  LpExpressFddiPortEntry  

lpExpressFddiPortIndex 1.3.6.1.4.1.114.1.1.17.1.1.1
A unique value for each Express port in the system. It's value ranges between 1 and the value of lpSystemExpressFddiPortCount.
OBJECT-TYPE    
  INTEGER  

lpExpressFddiPortSlotIndex 1.3.6.1.4.1.114.1.1.17.1.1.2
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lpExpressFddiPortLocalIndex 1.3.6.1.4.1.114.1.1.17.1.1.3
The index of this port relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lpExpressFddiPortForwardedCts 1.3.6.1.4.1.114.1.1.17.1.1.4
The number of frames forwarded by this MAC from an ethernet port to the FDDI network.
OBJECT-TYPE    
  Counter  

lpExpressFddiPortDroppedCts 1.3.6.1.4.1.114.1.1.17.1.1.5
The number of frames received by this MAC that were not forwarded.
OBJECT-TYPE    
  Counter  

lpExpressEthernetPort 1.3.6.1.4.1.114.1.1.18
OBJECT IDENTIFIER    

lpExpressEthernetPortTable 1.3.6.1.4.1.114.1.1.18.1
A list of Express ethernet port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpExpressEthernetPortEntry

lpExpressEthernetPortEntry 1.3.6.1.4.1.114.1.1.18.1.1
An Expres ethernet port entry contains information common to a particular Express ethernet port located in the system.
OBJECT-TYPE    
  LpExpressEthernetPortEntry  

lpExpressEthernetPortIndex 1.3.6.1.4.1.114.1.1.18.1.1.1
A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lpSystemExpressEthernetPortCount.
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortSlotIndex 1.3.6.1.4.1.114.1.1.18.1.1.2
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortLocalIndex 1.3.6.1.4.1.114.1.1.18.1.1.3
The index of this port relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortForwardedCts 1.3.6.1.4.1.114.1.1.18.1.1.4
The number of frames forwarded from this ethernet port to the FDDI network.
OBJECT-TYPE    
  Counter  

lpExpressEthernetPortDroppedCts 1.3.6.1.4.1.114.1.1.18.1.1.5
The number of frames received by this ethernet port that were not forwarded or u-turned.
OBJECT-TYPE    
  Counter  

lpExpressEthernetPortUTurnCts 1.3.6.1.4.1.114.1.1.18.1.1.6
The number of frames received by this ethernet port that were directed to another ethernet port.
OBJECT-TYPE    
  Counter  

lpExpressEthernetPortAction 1.3.6.1.4.1.114.1.1.18.1.1.7
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list.
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

lpExpressEthernetPortAddress 1.3.6.1.4.1.114.1.1.19
OBJECT IDENTIFIER    

lpExpressEthernetPortAddressTable 1.3.6.1.4.1.114.1.1.19.1
A list of Express Remote MAC Address entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpExpressEthernetPortAddressEntry

lpExpressEthernetPortAddressEntry 1.3.6.1.4.1.114.1.1.19.1.1
An entry contains information describing a remote Ethernet MAC detected to be attached to an Express port.
OBJECT-TYPE    
  LpExpressEthernetPortAddressEntry  

lpExpressEthernetPortAddressPortIndex 1.3.6.1.4.1.114.1.1.19.1.1.1
A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lpSystemExpressEthernetPortCount.
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortAddressIndex 1.3.6.1.4.1.114.1.1.19.1.1.2
The index of this address entry within the address table.
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortAddressSlotIndex 1.3.6.1.4.1.114.1.1.19.1.1.3
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortAddressType 1.3.6.1.4.1.114.1.1.19.1.1.4
This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table.
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

lpExpressEthernetPortAddressRemoteAddress 1.3.6.1.4.1.114.1.1.19.1.1.5
The remote MAC address detected on this port.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

lpExpressEthernetPortAddressIsStatic 1.3.6.1.4.1.114.1.1.19.1.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned on this port.
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

lpExpressEthernetPortAddressStaticPort 1.3.6.1.4.1.114.1.1.19.1.1.7
If the object lpExpressEthernetPortAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured.
OBJECT-TYPE    
  INTEGER  

lpExpressEthernetPortAddressAge 1.3.6.1.4.1.114.1.1.19.1.1.8
This object indicates the time, in seconds, elapsed since this MAC address was added to this port's address table.
OBJECT-TYPE    
  INTEGER  

lpPowerSupply 1.3.6.1.4.1.114.1.1.20
OBJECT IDENTIFIER    

lpPowerSupplyTable 1.3.6.1.4.1.114.1.1.20.1
A list of power supply entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpPowerSupplyEntry

lpPowerSupplyEntry 1.3.6.1.4.1.114.1.1.20.1.1
A power supply entry contains information common for a particular power supply unit in the system.
OBJECT-TYPE    
  LpPowerSupplyEntry  

lpPowerSupplyIndex 1.3.6.1.4.1.114.1.1.20.1.1.1
A unique value for each power supply in the system. It's value ranges between 1 and the value of lpSystemPowerSupplyCount.
OBJECT-TYPE    
  INTEGER  

lpPowerSupplyLocation 1.3.6.1.4.1.114.1.1.20.1.1.2
The physical slot in which this power supply unit resides in the system.
OBJECT-TYPE    
  INTEGER  

lpPowerSupplyStatus 1.3.6.1.4.1.114.1.1.20.1.1.3
The status of the power supply. A value of 0 indicates a working unit. A non-zero value represents a bit mask of the possible failure types. Each set bit indicates the following failure type: bit0: systemAcFailure bit1: systemPlus5Failure bit2: systemPlus12Failure bit3: systemOverTemperatureFailure.
OBJECT-TYPE    
  INTEGER  

lpPowerSupplyFailureType 1.3.6.1.4.1.114.1.1.20.1.1.4
This object is sent in the varlist when the lpPowerSupplyFailureEvent trap is generated. It indicates the particular failure type that caused this trap to be generated.
OBJECT-TYPE    
  INTEGER systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4)  

lpPowerSupplyLastFailure 1.3.6.1.4.1.114.1.1.20.1.1.5
This object represents the most recent power supply failure type. If no failure has occured, the value of this object is none. This object is included in the varlist when the lpPowerSupplyFailureEvent trap is generated. It indicates the failure type that caused the trap to be generated.
OBJECT-TYPE    
  INTEGER systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4), none(5)  

lpBridge 1.3.6.1.4.1.114.1.1.21
OBJECT IDENTIFIER    

lpBridgeTable 1.3.6.1.4.1.114.1.1.21.1
A list of bridge function entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgeEntry

lpBridgeEntry 1.3.6.1.4.1.114.1.1.21.1.1
A bridge entry contains information common to a particular bridge function in a given system.
OBJECT-TYPE    
  LpBridgeEntry  

lpBridgeIndex 1.3.6.1.4.1.114.1.1.21.1.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lpBridgeBaseSlotIndex 1.3.6.1.4.1.114.1.1.21.1.1.2
The slot number of the lowest numbered slot which contains a physical port that this bridge function controls.
OBJECT-TYPE    
  INTEGER  

lpBridgePortCount 1.3.6.1.4.1.114.1.1.21.1.1.3
The number of ports that this bridge function controls.
OBJECT-TYPE    
  INTEGER  

lpBridgeAddressTableSize 1.3.6.1.4.1.114.1.1.21.1.1.4
The size of the address table for this bridge function.
OBJECT-TYPE    
  INTEGER  

lpBridgeAddressThreshold 1.3.6.1.4.1.114.1.1.21.1.1.5
A reporting threshold for the total number of addresses known for this board. When this threshold is reached, the event lpBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the value reported by lpBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the value of lpBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of lpBridgeAddressThresholdEvents since the limit will never be reached.
OBJECT-TYPE    
  INTEGER  

lpBridgeMode 1.3.6.1.4.1.114.1.1.21.1.1.6
The operational mode of this bridge function. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
OBJECT-TYPE    
  INTEGER expressMode(1), ieee8021dBridgeMode(2), notSupported(3)  

lpBridgeLocalIndex 1.3.6.1.4.1.114.1.1.21.1.1.7
The index of this bridge function relative to the slot on which it is physically present.
OBJECT-TYPE    
  INTEGER  

lpBridgePortTable 1.3.6.1.4.1.114.1.1.21.2
A list of bridge port entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgePortEntry

lpBridgePortEntry 1.3.6.1.4.1.114.1.1.21.2.1
A Port entry contains information for a particular bridge port in a given system.
OBJECT-TYPE    
  LpBridgePortEntry  

lpBridgePortBridgeIndex 1.3.6.1.4.1.114.1.1.21.2.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lpBridgePortIndex 1.3.6.1.4.1.114.1.1.21.2.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references.
OBJECT-TYPE    
  INTEGER  

lpBridgePortSlotIndex 1.3.6.1.4.1.114.1.1.21.2.1.3
The slot number corresponding to the physical location of this port.
OBJECT-TYPE    
  INTEGER  

lpBridgePortLocalIndex 1.3.6.1.4.1.114.1.1.21.2.1.4
The index of this port relative to the slot on which it is physically present and its port type. For example FDDI ports in a slot are identified with local indices from 1 to the number of FDDI ports in that slot, and the Ethernet ports in the same slot are identified with local indices from 1 to the number of Ethernet ports in that slot.
OBJECT-TYPE    
  INTEGER  

lpBridgePortType 1.3.6.1.4.1.114.1.1.21.2.1.5
The type of this port.
OBJECT-TYPE    
  INTEGER ethernet(1), fddi(2), other(3)  

lpBridgePortIpFragmentationEnabled 1.3.6.1.4.1.114.1.1.21.2.1.6
A flag indicating whether or not IP fragmentation is enabled on this bridge port. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
OBJECT-TYPE    
  INTEGER true(1), false(2), notSupported(3)  

lpBridgePortReceiveMulticastLimit 1.3.6.1.4.1.114.1.1.21.2.1.7
The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate.
OBJECT-TYPE    
  INTEGER 0..65535  

lpBridgePortAddressAction 1.3.6.1.4.1.114.1.1.21.2.1.8
This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the port's address list. flushDynamicAddress: causes all dynamic addresses to be flushed from the port's address list.
OBJECT-TYPE    
  INTEGER other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4)  

lpBridgePortTotalForwardedCts 1.3.6.1.4.1.114.1.1.21.2.1.9
The total number of frames forwarded from this port to all other ports of this bridge. Note that the total forwarded count is NOT equal to the receive count minus the discard count, as a single received multicast/broadcast frame can be forwarded to multiple bridge ports. Also frames which are 'flooded' because of unknown destination addresses account for multiple forwarding as well. The total forwarding count is the instantaneous sumation of the 'forwarded to' counts to all other ports of the bridge.
OBJECT-TYPE    
  Counter  

lpBridgePortManagementFramesReceived 1.3.6.1.4.1.114.1.1.21.2.1.10
The number of bridge management frames received by this port.
OBJECT-TYPE    
  Counter  

lpBridgePortTotalDiscards 1.3.6.1.4.1.114.1.1.21.2.1.11
The total number of frames discarded by this port.
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveBlockedDiscards 1.3.6.1.4.1.114.1.1.21.2.1.12
The number of frames discarded by this port because the the receiving bridge port was not in the 'forwarding' state.
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveMulticastLimitExceededs 1.3.6.1.4.1.114.1.1.21.2.1.13
The number of multicast/broadcast frames discarded by this port because the lpBridgePortReceiveMulticastLimit was exceeded.
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveSecurityDiscards 1.3.6.1.4.1.114.1.1.21.2.1.14
The number of frames discarded by this port because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), which is not allowed to move, appears to have moved.
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveUnknownDiscards 1.3.6.1.4.1.114.1.1.21.2.1.15
The number of frames discarded by this port because the destination address was unknown. Note that this counter is only valid for FDDI ports, and only when the bridge is an EEM, or an ESM operating in express mode.
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveOtherDiscards 1.3.6.1.4.1.114.1.1.21.2.1.16
The number of frames discarded by this port because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops).
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveErrorDiscards 1.3.6.1.4.1.114.1.1.21.2.1.17
The number of frames discarded by this port because of internal bridge system errors (e.g., hardware and software address table discrepencies).
OBJECT-TYPE    
  Counter  

lpBridgePortSameSegmentDiscards 1.3.6.1.4.1.114.1.1.21.2.1.18
The number of frames discarded by this port because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged.
OBJECT-TYPE    
  Counter  

lpBridgePortTransmitBlockedDiscards 1.3.6.1.4.1.114.1.1.21.2.1.19
The number of frames discarded by this port because the the transmitting bridge port was not in the 'forwarding' state.
OBJECT-TYPE    
  Counter  

lpBridgePortTotalFiltered 1.3.6.1.4.1.114.1.1.21.2.1.20
The total number of frames discarded by this port due to user defined filters.
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveUnicastFiltered 1.3.6.1.4.1.114.1.1.21.2.1.21
The number of frames discarded by this port due to user defined receive path filters.
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveMulticastFiltered 1.3.6.1.4.1.114.1.1.21.2.1.22
The number of frames discarded by this port due to user defined receive multicast path filters.
OBJECT-TYPE    
  Counter  

lpBridgePortTransmitUnicastFiltered 1.3.6.1.4.1.114.1.1.21.2.1.23
The number of frames discarded by this port due to user defined transmit path filters.
OBJECT-TYPE    
  Counter  

lpBridgePortTransmitMulticastFiltered 1.3.6.1.4.1.114.1.1.21.2.1.24
The number of frames discarded by this port due to user defined transmit multicast path filters.
OBJECT-TYPE    
  Counter  

lpBridgePortReceiveMulticastLimitExceededCount 1.3.6.1.4.1.114.1.1.21.2.1.25
The number of times the lpBridgePortReceiveMulticastLimit was exceeded.
OBJECT-TYPE    
  Counter  

lpBridgePortForwardedToTable 1.3.6.1.4.1.114.1.1.21.3
A list of port forwarding count information.
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgePortForwardedToEntry

lpBridgePortForwardedToEntry 1.3.6.1.4.1.114.1.1.21.3.1
A bridge port forwarded-to entry contains information on the count of frames forwarded from the receiving port indicated by the corresponding lpBridgePortForwardedToReceivePortIndex, to the destination port indicated by the corresponding lpBridgePortForwardedToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lpBridgePortForwardedToReceivePortIndex and the lpBridgePortForwardedToDstPortIndex objects.
OBJECT-TYPE    
  LpBridgePortForwardedToEntry  

lpBridgePortForwardedToBridgeIndex 1.3.6.1.4.1.114.1.1.21.3.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lpBridgePortForwardedToReceivePortIndex 1.3.6.1.4.1.114.1.1.21.3.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is forwarding frames.
OBJECT-TYPE    
  INTEGER  

lpBridgePortForwardedToDstPortIndex 1.3.6.1.4.1.114.1.1.21.3.1.3
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being forwarded.
OBJECT-TYPE    
  INTEGER  

lpBridgePortForwardedToCount 1.3.6.1.4.1.114.1.1.21.3.1.4
The count of frames forwarded from the receiving port to the destination port.
OBJECT-TYPE    
  Counter  

lpBridgePortFilteredToTable 1.3.6.1.4.1.114.1.1.21.4
A list of port filtering count information.
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgePortFilteredToEntry

lpBridgePortFilteredToEntry 1.3.6.1.4.1.114.1.1.21.4.1
A bridge port filtered-to entry contains information on the count of frames filtered from the receiving port indicated by the corresponding lpBridgePortFilteredToReceivePortIndex, to the destination port indicated by the corresponding lpBridgePortFilteredToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lpBridgePortFilteredToReceivePortIndex and the lpBridgePortFilteredToDstPortIndex objects.
OBJECT-TYPE    
  LpBridgePortFilteredToEntry  

lpBridgePortFilteredToBridgeIndex 1.3.6.1.4.1.114.1.1.21.4.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lpBridgePortFilteredToReceivePortIndex 1.3.6.1.4.1.114.1.1.21.4.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is filtering frames.
OBJECT-TYPE    
  INTEGER  

lpBridgePortFilteredToDstPortIndex 1.3.6.1.4.1.114.1.1.21.4.1.3
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being filtered.
OBJECT-TYPE    
  INTEGER  

lpBridgePortFilteredToCount 1.3.6.1.4.1.114.1.1.21.4.1.4
The count of frames filtered from the receiving port to the destination port.
OBJECT-TYPE    
  Counter  

lpBridgePortAddressTable 1.3.6.1.4.1.114.1.1.21.5
A list of bridge port address entries.
OBJECT-TYPE    
  SEQUENCE OF  
    LpBridgePortAddressEntry

lpBridgePortAddressEntry 1.3.6.1.4.1.114.1.1.21.5.1
An bridge port address entry contains information about particular bridge port address in a given system.
OBJECT-TYPE    
  LpBridgePortAddressEntry  

lpBridgePortAddressBridgeIndex 1.3.6.1.4.1.114.1.1.21.5.1.1
A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount.
OBJECT-TYPE    
  INTEGER  

lpBridgePortAddressPortIndex 1.3.6.1.4.1.114.1.1.21.5.1.2
A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references.
OBJECT-TYPE    
  INTEGER  

lpBridgePortAddressIndex 1.3.6.1.4.1.114.1.1.21.5.1.3
The index of this address entry within the bridge address table.
OBJECT-TYPE    
  INTEGER  

lpBridgePortAddressRemoteAddress 1.3.6.1.4.1.114.1.1.21.5.1.4
The remote MAC address detected on the port corresponding to this entry. Setting this object attempts to create a new entry in the table. Since the value of lpBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for lpBridgePortAddressIndex is zero. A get-next using the values of lpBridgePortAddressBridgeIndex and lpBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry.
OBJECT-TYPE    
  OCTET STRING SIZE(6)  

lpBridgePortAddressType 1.3.6.1.4.1.114.1.1.21.5.1.5
This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table.
OBJECT-TYPE    
  INTEGER other(1), invalid(2)  

lpBridgePortAddressIsStatic 1.3.6.1.4.1.114.1.1.21.5.1.6
A value indicating whether this MAC address was statically configured or was dynamically learned.
OBJECT-TYPE    
  INTEGER isStatic(1), isDynamic(2)  

lpBridgePortAddressStaticPort 1.3.6.1.4.1.114.1.1.21.5.1.7
If the object lpBridgePortAddressIsStatic has value isStatic(1), this object indicates the local port index (as reported by lpBridgePortLocalIndex) for which this MAC address was statically configured. If the object lpBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0.
OBJECT-TYPE    
  INTEGER  

lpBridgePortAddressAge 1.3.6.1.4.1.114.1.1.21.5.1.8
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the port corresponding to this entry.
OBJECT-TYPE    
  INTEGER  

lpTrapEnterprise 1.3.6.1.4.1.114.1.1.22
OBJECT IDENTIFIER    

lpTrapEnterpriseTable 1.3.6.1.4.1.114.1.1.22.1
This table contains a listing of enterprises under which various traps are defined. In all cases except for the MIB-II generic traps, the enterprise under which a trap is defined is the same as that appearing in the ENTERPRISE portion of the trap. Associated with each trap enterprise is a trap enterprise index.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrapEnterpriseTableEntry

lpTrapEnterpriseTableEntry 1.3.6.1.4.1.114.1.1.22.1.1
Information relating a specific trap enterprise OID with a trap enterprise index.
OBJECT-TYPE    
  LpTrapEnterpriseTableEntry  

lpTrapEnterpriseIndex 1.3.6.1.4.1.114.1.1.22.1.1.1
A unique index corresponding to a particular enterprise OID under which traps are defined. This value of this object corresponding to a particular enterprise OID will remain constant accross system resets.
OBJECT-TYPE    
  INTEGER  

lpTrapEnterpriseOID 1.3.6.1.4.1.114.1.1.22.1.1.2
An enterpise OID under which traps are defined.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

lpTrapDest 1.3.6.1.4.1.114.1.1.23
OBJECT IDENTIFIER    

lpTrapDestTable 1.3.6.1.4.1.114.1.1.23.1
This table contains information specifying which traps will be transmitted by the LANplex to a given destination address. The table is indexed by the destination address, the index of the enterprise which generates the trap, and the trap number. Each entry in the table with a status of valid identifies a trap which, when generated, will be transmitted to the corresponding destination address listed in that entry.
OBJECT-TYPE    
  SEQUENCE OF  
    LpTrapDestTableEntry

lpTrapDestTableEntry 1.3.6.1.4.1.114.1.1.23.1.1
Information relating a trap with a destination address to which the trap will be sent when it is generated.
OBJECT-TYPE    
  LpTrapDestTableEntry  

lpTrapDestAddr 1.3.6.1.4.1.114.1.1.23.1.1.1
The network address to which the trap identified by this entry is to be transmitted.
OBJECT-TYPE    
  NetworkAddress  

lpTrapDestEnterpriseIndex 1.3.6.1.4.1.114.1.1.23.1.1.2
The enterprise index of the enterprise identified in this entry. The value of this object is the same as the lpTrapEnterpriseIndex value for a given enterprise.
OBJECT-TYPE    
  INTEGER  

lpTrapNumber 1.3.6.1.4.1.114.1.1.23.1.1.3
The number of the trap within the corresponding enterprise for this entry.
OBJECT-TYPE    
  INTEGER  

lpTrapEntryStatus 1.3.6.1.4.1.114.1.1.23.1.1.4
The status of the trap destination table entry. Setting this object to valid has the effect of attempting to add the row corresponding to the instance specified. If the instance already exists, the set is successful (with no new entry added). If the instance specified is invalid, the set fails, otherwise the set succeeds and results in a new entry being added to the table. Setting this object to invalid has the effect of removing the corresponding entry from the table.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

Defined Objects

SlotEntry  
SEQUENCE    
  INTEGER as slotIndex  
  INTEGER as slotBoardType  
  OCTET STRING as slotBoardRevision  
  INTEGER as slotBoardStatus  
  DisplayString as slotBoardName  
  DisplayString as slotBoardNameAbbrev  
  INTEGER as slotBoardAction  

SPMEntry  
SEQUENCE    
  INTEGER as spmSlotIndex  
  INTEGER as spmEthernetPortCount  
  INTEGER as spmBaseEthernetPortIndex  

FEAMEntry  
SEQUENCE    
  INTEGER as feamSlotIndex  
  INTEGER as feamMACCount  
  INTEGER as feamBaseMACIndex  
  INTEGER as feamPortCount  
  INTEGER as feamBasePortIndex  

FCMEntry  
SEQUENCE    
  INTEGER as fcmSlotIndex  
  INTEGER as fcmPortCount  
  INTEGER as fcmBasePortIndex  

PortEntry  
SEQUENCE    
  INTEGER as portSlotIndex  
  INTEGER as portIndex  
  DisplayString as portLabel  

EEMEntry  
SEQUENCE    
  INTEGER as eemSlotIndex  
  INTEGER as eemFddiMACCount  
  INTEGER as eemBaseFddiMACIndex  
  INTEGER as eemEthernetPortCount  
  INTEGER as eemBaseEthernetPortIndex  
  INTEGER as eemAddressThreshold  

EEMFddiMACEntry  
SEQUENCE    
  INTEGER as eemFddiSlotIndex  
  INTEGER as eemFddiMACIndex  
  Counter as eemFddiMACForwardedCts  
  Counter as eemFddiMACDroppedCts  

EEMEthernetPortEntry  
SEQUENCE    
  INTEGER as eemEthernetPortSlotIndex  
  INTEGER as eemEthernetPortIndex  
  DisplayString as eemEthernetPortLabel  
  Counter as eemEthernetPortForwardedCts  
  Counter as eemEthernetPortDroppedCts  
  Counter as eemEthernetPortUTurnCts  
  INTEGER as eemEthernetPortState  
  INTEGER as eemEthernetPortAction  

EEMEthernetMACAddressEntry  
SEQUENCE    
  INTEGER as eemEthernetMACAddressSlotIndex  
  INTEGER as eemEthernetMACAddressPortIndex  
  INTEGER as eemEthernetMACAddressIndex  
  INTEGER as eemEthernetMACAddressType  
  OCTET STRING as eemEthernetMACAddressRemoteAddress  
  INTEGER as eemEthernetMACAddressIsStatic  
  INTEGER as eemEthernetMACAddressStaticPort  
  INTEGER as eemEthernetMACAddressAge  

LpSlotEntry  
SEQUENCE    
  INTEGER as lpSlotIndex  
  INTEGER as lpSlotBoardType  
  OCTET STRING as lpSlotBoardRevision  
  INTEGER as lpSlotBoardStatus  
  DisplayString as lpSlotBoardName  
  DisplayString as lpSlotBoardNameAbbrev  
  INTEGER as lpSlotFddiMacCount  
  INTEGER as lpSlotFddiMacBaseIndex  
  INTEGER as lpSlotFddiPortCount  
  INTEGER as lpSlotFddiPortBaseIndex  
  INTEGER as lpSlotEthernetPortCount  
  INTEGER as lpSlotEthernetPortBaseIndex  
  INTEGER as lpSlotExpressFunctionCount  
  INTEGER as lpSlotExpressFunctionBaseIndex  
  INTEGER as lpSlotExpressFddiPortCount  
  INTEGER as lpSlotExpressFddiPortBaseIndex  
  INTEGER as lpSlotExpressEthernetPortCount  
  INTEGER as lpSlotExpressEthernetPortBaseIndex  
  INTEGER as lpSlotBoardAction  
  INTEGER as lpSlotBridgeFunctionCount  
  INTEGER as lpSlotBridgeFunctionBaseIndex  

LpFddiMacEntry  
SEQUENCE    
  INTEGER as lpFddiMacIndex  
  INTEGER as lpFddiMacSlotIndex  
  INTEGER as lpFddiMacLocalIndex  
  INTEGER as lpFddiMacByteReceiveRate  
  INTEGER as lpFddiMacPeakByteReceiveRate  
  INTEGER as lpFddiMacFrameReceiveRate  
  INTEGER as lpFddiMacPeakFrameReceiveRate  
  INTEGER as lpFddiMacByteTransmitRate  
  INTEGER as lpFddiMacPeakByteTransmitRate  
  INTEGER as lpFddiMacFrameTransmitRate  
  INTEGER as lpFddiMacPeakFrameTransmitRate  
  INTEGER as lpFddiMacReceiveMulticastThreshold  
  OCTET STRING as lpFddiMacBeaconHistory  

LpEthernetPortEntry  
SEQUENCE    
  INTEGER as lpEthernetPortIndex  
  INTEGER as lpEthernetPortSlotIndex  
  INTEGER as lpEthernetPortLocalIndex  
  DisplayString as lpEthernetPortLabel  
  INTEGER as lpEthernetPortChipsetType  
  INTEGER as lpEthernetPortLinkStatus  
  INTEGER as lpEthernetPortByteReceiveRate  
  INTEGER as lpEthernetPortPeakByteReceiveRate  
  INTEGER as lpEthernetPortFrameReceiveRate  
  INTEGER as lpEthernetPortPeakFrameReceiveRate  
  INTEGER as lpEthernetPortByteTransmitRate  
  INTEGER as lpEthernetPortPeakByteTransmitRate  
  INTEGER as lpEthernetPortFrameTransmitRate  
  INTEGER as lpEthernetPortPeakFrameTransmitRate  
  INTEGER as lpEthernetPortReceiveMulticastThreshold  
  INTEGER as lpEthernetPortType  

LpFddiPortEntry  
SEQUENCE    
  INTEGER as lpFddiPortIndex  
  INTEGER as lpFddiPortSlotIndex  
  INTEGER as lpFddiPortLocalIndex  
  DisplayString as lpFddiPortLabel  

LpExpressEntry  
SEQUENCE    
  INTEGER as lpExpressIndex  
  INTEGER as lpExpressSlotIndex  
  INTEGER as lpExpressLocalIndex  
  INTEGER as lpExpressAddressThreshold  

LpExpressFddiPortEntry  
SEQUENCE    
  INTEGER as lpExpressFddiPortIndex  
  INTEGER as lpExpressFddiPortSlotIndex  
  INTEGER as lpExpressFddiPortLocalIndex  
  Counter as lpExpressFddiPortForwardedCts  
  Counter as lpExpressFddiPortDroppedCts  

LpExpressEthernetPortEntry  
SEQUENCE    
  INTEGER as lpExpressEthernetPortIndex  
  INTEGER as lpExpressEthernetPortSlotIndex  
  INTEGER as lpExpressEthernetPortLocalIndex  
  Counter as lpExpressEthernetPortForwardedCts  
  Counter as lpExpressEthernetPortDroppedCts  
  Counter as lpExpressEthernetPortUTurnCts  
  INTEGER as lpExpressEthernetPortAction  

LpExpressEthernetPortAddressEntry  
SEQUENCE    
  INTEGER as lpExpressEthernetPortAddressPortIndex  
  INTEGER as lpExpressEthernetPortAddressIndex  
  INTEGER as lpExpressEthernetPortAddressSlotIndex  
  INTEGER as lpExpressEthernetPortAddressType  
  OCTET STRING as lpExpressEthernetPortAddressRemoteAddress  
  INTEGER as lpExpressEthernetPortAddressIsStatic  
  INTEGER as lpExpressEthernetPortAddressStaticPort  
  INTEGER as lpExpressEthernetPortAddressAge  

LpPowerSupplyEntry  
SEQUENCE    
  INTEGER as lpPowerSupplyIndex  
  INTEGER as lpPowerSupplyLocation  
  INTEGER as lpPowerSupplyStatus  
  INTEGER as lpPowerSupplyFailureType  
  INTEGER as lpPowerSupplyLastFailure  

LpBridgeEntry  
SEQUENCE    
  INTEGER as lpBridgeIndex  
  INTEGER as lpBridgeBaseSlotIndex  
  INTEGER as lpBridgePortCount  
  INTEGER as lpBridgeAddressTableSize  
  INTEGER as lpBridgeAddressThreshold  
  INTEGER as lpBridgeMode  
  INTEGER as lpBridgeLocalIndex  

LpBridgePortEntry  
SEQUENCE    
  INTEGER as lpBridgePortBridgeIndex  
  INTEGER as lpBridgePortIndex  
  INTEGER as lpBridgePortSlotIndex  
  INTEGER as lpBridgePortLocalIndex  
  INTEGER as lpBridgePortType  
  INTEGER as lpBridgePortIpFragmentationEnabled  
  INTEGER as lpBridgePortReceiveMulticastLimit  
  INTEGER as lpBridgePortAddressAction  
  Counter as lpBridgePortTotalForwardedCts  
  Counter as lpBridgePortManagementFramesReceived  
  Counter as lpBridgePortTotalDiscards  
  Counter as lpBridgePortReceiveBlockedDiscards  
  Counter as lpBridgePortReceiveMulticastLimitExceededs  
  Counter as lpBridgePortReceiveSecurityDiscards  
  Counter as lpBridgePortReceiveUnknownDiscards  
  Counter as lpBridgePortReceiveOtherDiscards  
  Counter as lpBridgePortReceiveErrorDiscards  
  Counter as lpBridgePortSameSegmentDiscards  
  Counter as lpBridgePortTransmitBlockedDiscards  
  Counter as lpBridgePortTotalFiltered  
  Counter as lpBridgePortReceiveUnicastFiltered  
  Counter as lpBridgePortReceiveMulticastFiltered  
  Counter as lpBridgePortTransmitUnicastFiltered  
  Counter as lpBridgePortTransmitMulticastFiltered  
  Counter as lpBridgePortReceiveMulticastLimitExceededCount  

LpBridgePortForwardedToEntry  
SEQUENCE    
  INTEGER as lpBridgePortForwardedToBridgeIndex  
  INTEGER as lpBridgePortForwardedToReceivePortIndex  
  INTEGER as lpBridgePortForwardedToDstPortIndex  
  Counter as lpBridgePortForwardedToCount  

LpBridgePortFilteredToEntry  
SEQUENCE    
  INTEGER as lpBridgePortFilteredToBridgeIndex  
  INTEGER as lpBridgePortFilteredToReceivePortIndex  
  INTEGER as lpBridgePortFilteredToDstPortIndex  
  Counter as lpBridgePortFilteredToCount  

LpBridgePortAddressEntry  
SEQUENCE    
  INTEGER as lpBridgePortAddressBridgeIndex  
  INTEGER as lpBridgePortAddressPortIndex  
  INTEGER as lpBridgePortAddressIndex  
  OCTET STRING as lpBridgePortAddressRemoteAddress  
  INTEGER as lpBridgePortAddressType  
  INTEGER as lpBridgePortAddressIsStatic  
  INTEGER as lpBridgePortAddressStaticPort  
  INTEGER as lpBridgePortAddressAge  

LpTrapEnterpriseTableEntry  
SEQUENCE    
  INTEGER as lpTrapEnterpriseIndex  
  OBJECT IDENTIFIER as lpTrapEnterpriseOID  

LpTrapDestTableEntry  
SEQUENCE    
  NetworkAddress as lpTrapDestAddr  
  INTEGER as lpTrapDestEnterpriseIndex  
  INTEGER as lpTrapNumber  
  INTEGER as lpTrapEntryStatus