| genOpEntry |
1.3.6.1.4.1.1751.2.53.1.2.1 |
| An entry in the table, containing data about a single modules operations. |
| OBJECT-TYPE |
|
|
|
| |
GenOpEntry |
|
|
| genOpIndex |
1.3.6.1.4.1.1751.2.53.1.2.1.2 |
| Index to identify the operation supported by this row entry. Each operation type that is supported by this module should be represented by a unique row in this MIB Table. A walk of this MIB table should reveal all the operations that are supported by the device. The operations supported are: uploadConfig -- The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are uploading. The 'genOpFileName' should be set to the name and path of the config file on the TFTP server. downloadConfig -- The 'genOpDestIndex' should be set to the 'genAppFileId' of the config file you are downloading to (if one does not exist, you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpServerIP' should be set to the server from which the config will be copied. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to 0 (to indicate source of server). The 'genOpFileName' should be set to the name and path of the config file on the TFTP server. report -- uploadSoftware -- The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpServerIP' should be set to the server to which the config file will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the software file you are uploading. The 'genOpFileName' should be set to the name and path of the image file on the TFTP server. downloadSoftware -- The 'genOpDestIndex' should be set to the 'genAppFileId' of the software file you are downloading to (if one does not exist, you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpServerIP' should be set to the server from which the config file will be copied. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpSourceIndex' should be set to 0 (to indicate source of server). The 'genOpFileName' should be set to the name and path of the image file on the TFTP server. localConfigFileCopy -- (using a 'genOpType' of 'localPeerTransport') The 'genOpDestIndex' should be set to the 'genAppFileId' of the config file you are copying to (if one does not exist you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are copying from. The 'genOpServerIP' should be set to NULL. The 'genOpProtocolType' should be set to 'localPeerTransport'. The 'genOpFileName' should be set to NULL. localSWFileCopy -- (using a 'genOpType' of 'localPeerTransport') The 'genOpDestIndex' should be set to the 'genAppFileId' of the software file you are copying to (if one does not exist you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpSourceIndex' should be set to the 'genAppFileId' of the software file you are copying from. The 'genOpServerIP' should be set to NULL. The 'genOpProtocolType' should be set to 'localPeerTransport'. The 'genOpFileName' should be set to NULL. localConfigFileCopy -- (using a 'genOpType' of 'localServerTransport') The 'genOpDestIndex' should be set to the 'genAppFileId' of the config file you are copying to (if one does not exist you'll need to RowCreate it in the 'genAppFileTable') or ZERO (0) if copying to a localServer. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the config file you are copying from or ZERO (0) if copying from a localServer. The 'genOpServerIP' should be set to the address of the local server. The 'genOpProtocolType' should be set to 'localServerTransport'. localSWFileCopy -- (using a 'genOpType' of 'localServerTransport') The 'genOpDestIndex' should be set to the 'genAppFileId' of the software file you are copying to (if one does not exist you'll need to RowCreate it in the 'genAppFileTable'). The 'genOpSourceIndex' should be set to the 'genAppFileId' of the software file you are copying from. The 'genOpServerIP' should be set to the address of the local server. The 'genOpProtocolType' should be set to 'localServerTransport'. uploadLogfile -- The 'genOpDestIndex' should be set to 0 (to indicate destination of server). The 'genOpSourceIndex' should be set to the 'genAppFileId' of the log file you are copying from. The 'genOpServerIP' should be set to the server to which the config will be saved. The 'genOpProtocolType' should be set to the IP protocol used to transport the file. The 'genOpFileName' should be set to the name and path of the log file on the TFTP server. eraseFile -- The 'genOpDestIndex' Is not applicable for this command. The 'genOpSourceIndex' should be set to the 'genAppFileId' of the file you wish to erase. The 'genOpServerIP' should be set to 0. The 'genOpProtocolType' should be set to 0. The 'genOpFileName' should be set to NULL. show -- Reporting information to the CLI. syncStandbyAgent(11) -- copy configuration AND software image files to the (non-active) standby agent in a P550/P880. The 'genOpDestIndex' should be set to 1 The 'genOpSourceIndex' should be set to 1 The 'genOpServerIP' should be set to NULL. The 'genOpProtocolType' should be set to 'localPeerTransport'. The 'genOpFileName' should be set to NULL. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
uploadConfig(1), downloadConfig(2), report(3), uploadSoftware(4), downloadSoftware(5), localConfigFileCopy(6), localSWFileCopy(7), uploadLogfile(8), eraseFile(9), show(10), syncStandbyAgent(11) |
|
| genOpRunningState |
1.3.6.1.4.1.1751.2.53.1.2.1.3 |
| Identifies the operation to perform and the state of that operation. This field acts as both the trigger to initiate the operation (via the beginOperation) and the status field of the operation itself (i.e. waiting-ip, running-ip, etc.). It is expected that all dependent MIB objects will be set before the trigger is set to beginOperation. The operations completion is triggered by the return to the idle state. idle(1), - Operation not in progress beginOperation(2), - Trigger by NMS to start the operation waitingIp(3), - Communication phase; waiting for response runningIp(4), - Communication phase; transferring data copyingLocal(5), - Local operation readingConfiguration(6), - Parsing / Executing configuration file executing(7) - Executing Command (such as erasing a file or reporting) |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
idle(1), beginOperation(2), waitingIp(3), runningIp(4), copyingLocal(5), readingConfiguration(6), executing(7) |
|
| genOpLastFailureIndex |
1.3.6.1.4.1.1751.2.53.1.2.1.12 |
| While a download is in progress this will always be 'no-error'. After a download is complete this indicates the success or failure of the download. If it is anything other than 'no-error' then 'genOpLastFailureDisplay' will contain a textual description of the error. Error codes from 100 upwards are errors returned from a TFTP server. errors below this are locally generated. Configuration files may return errors after download as a result of reading a config file into the system. confFileGenErr - General (unknown error) confFileParseError - Reading of config file resulted in parsing errors. confFileExecError - Reading of config file resulted in execution errors. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
noError(1), genError(2), configError(3), busy(4), timeout(5), cancelled(6), incompatibleFile(7), fileTooBig(8), protocolError(9), flashWriteError(10), nvramWriteError(11), confFileGenErr(12), confFileParseError(13), confFileExecError(14), undefinedError(100), fileNotFound(101), accessViolation(102), outOfMemory(103), illegalOperation(104), unknownTransferId(105), fileAlreadyExists(106), noSuchUser(107) |
|
| genAppFileEntry |
1.3.6.1.4.1.1751.2.53.2.1.1 |
| An entry in the table, containing data about a single application / config file. |
| OBJECT-TYPE |
|
|
|
| |
GenAppFileEntry |
|
|
| genAppFileType |
1.3.6.1.4.1.1751.2.53.2.1.1.3 |
| The type (class) of the application. This class serves to catagorize the many application files in the system into some fixed types: runningConfiguration -- This entry represents a virtual file in the system. Use of this entry in the genOpTable should serve to cause the system to generate it's configuration or to force the system to read a new config into it's configuration. startupConfiguration -- This entry represents a real file that is used at start-up to configure the device. defaultConfiguration -- This entry represents a file which contains the default configuration of the device. report -- ?? genConfigFile -- This entry represents a file which contains configuration information (similar to the 'startupConfiguration' above but is not automatically read by the device. This entry is used to represent 'alternate', 'backup' or 'experimental' configurations that the user may which to store on the device. nvramFile -- This entry represents a file that is contain in the nvram files system that does not fit any of the other pre-defined types. swRuntimeImage -- This entry represents a software images that contains operational code that is currently being used to run the device. swBootImage -- This entry represents a software image that contain operational code that is used to initally boot the device. swComponent -- This entry represents a file that is stored as an 'alternate', 'backup' or 'experimental' version of operational code. other -- other swWebImage -- The Image file of the embedded Web application (java application, etc). |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
runningConfiguration(1), startupConfiguration(2), defaultConfiguration(3), report(4), genConfigFile(5), logFile(6), nvramFile(7), swRuntimeImage(8), swBootImage(9), swComponent(10), other(11), swWebImage(12) |
|
| genAppFileDateStamp |
1.3.6.1.4.1.1751.2.53.2.1.1.8 |
| The time stamp is the Real Time if supported otherwise sysUpTime. The convention for this field is as follows: Real Time: Entry is prefixed with an 'R' character and time is formatted using the convention for date-and-time (rfc1903) DISPLAY-HINT 'R-2d-1d-1d,1d:1d:1d.1d,1a1d:1d' field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: R-1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SysUpTime: Entry is prefixed with an 'S' character and time is formatted using a portion of that date-and-time convention DISPLAY-HINT 'S-1d-1d,1d:1d:1d.1d' field octets contents range ----- ------ -------- ----- 1 3 month 1..12 2 4 day 1..31 3 5 hour 0..23 4 6 minutes 0..59 5 7 seconds 0..60 6 8 deci-seconds 0..9 For example, S-5-26,13:30:15.0 Represents a file that has existed in the system for 5 months, 26 days, 13 hours, 30 minutes, 15 seconds exactly. This value will be reset after a reboot of the system. |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
SIZE(0..64) |
|
| GenOpEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as genOpModuleId |
|
|
| |
INTEGER as genOpIndex |
|
|
| |
INTEGER as genOpRunningState |
|
|
| |
Integer32 as genOpSourceIndex |
|
|
| |
Integer32 as genOpDestIndex |
|
|
| |
IpAddress as genOpServerIP |
|
|
| |
DisplayString as genOpUserName |
|
|
| |
OCTET STRING as genOpPassword |
|
|
| |
INTEGER as genOpProtocolType |
|
|
| |
DisplayString as genOpFileName |
|
|
| |
DisplayString as genOpRunningStateDisplay |
|
|
| |
INTEGER as genOpLastFailureIndex |
|
|
| |
DisplayString as genOpLastFailureDisplay |
|
|
| |
DisplayString as genOpLastWarningDisplay |
|
|
| |
Integer32 as genOpErrorLogIndex |
|
|
| |
INTEGER as genOpResetSupported |
|
|
| |
INTEGER as genOpEnableReset |
|
|
| |
Integer32 as genOpNextBootImageIndex |
|
|
| |
Integer32 as genOpLastBootImageIndex |
|
|
| |
INTEGER as genOpFileSystemType |
|
|
| |
INTEGER as genOpReportSpecificFlags |
|
|
| |
Integer32 as genOpOctetsReceived |
|
|
| GenAppFileEntry |
|
| SEQUENCE |
|
|
|
| |
INTEGER as genAppFileId |
1..65535 |
|
| |
DisplayString as genAppFileName |
|
|
| |
INTEGER as genAppFileType |
|
|
| |
DisplayString as genAppFileDescription |
|
|
| |
Integer32 as genAppFileSize |
|
|
| |
OCTET STRING as genAppFileVersionNumber |
|
|
| |
INTEGER as genAppFileLocation |
|
|
| |
DisplayString as genAppFileDateStamp |
|
|
| |
RowStatus as genAppFileRowStatus |
|
|