
MADGE-ABC-MIB
File:
MADGE-ABC-MIB.mib (26336 bytes)
Imported modules
Imported symbols
Defined Objects
| madge |
1.3.6.1.4.1.494 |
| OBJECT IDENTIFIER |
|
|
|
| madgeAbc |
1.3.6.1.4.1.494.15 |
| OBJECT IDENTIFIER |
|
|
|
| madgeAbcVersion |
1.3.6.1.4.1.494.15.1 |
| The version number of the Active Broadcast Control MIB. The most recent version is 1. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| madgeAbcTokenRingAreFilterState |
1.3.6.1.4.1.494.15.2.1.1 |
| The current state of the ARE (All Route Explorer) filter. disable: Perform no action. enable: Only optimal ARE frames will be forwared onto other ports - optimal frames are those which are quicker or have shorter routing information than other frames. monitor: No filtering will be performed but the potential performance of the filter will be measured, i.e. the count and timeout keys will be incremented as if the filter was on. |
| OBJECT-TYPE |
|
|
|
| |
AbcState |
|
|
| madgeAbcTokenRingAreConversionState |
1.3.6.1.4.1.494.15.2.2.1 |
| The current state of the ARE (All Route Explorer) conversion filter. disable: Perform no action. enable: Turn on ARE conversion. The frames specified by the mode key will be converted into Spanning Tree Explorers (ARE). monitor: No filtering will be performed but the potential performance of the filter will be measured, i.e. the count and timeout keys will be incremented as if the filter was on. |
| OBJECT-TYPE |
|
|
|
| |
AbcState |
|
|
| madgeAbcTokenRingAreConversionMode |
1.3.6.1.4.1.494.15.2.2.5 |
| This variable controls the action taken when forwarding All Routes Explorer frames. first: convert all ARE frames with a RIF length of 2 to STE frames. all: convert all ARE frames to STE frames. bcast-first: convert all ARE frames with the broadcast destination address, with a RIF length of 2 to STE frames. bcast-all: convert all ARE frames with the broadcast destination address to STE frames. |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
first(1), all(2), bcast-first(3), bcast-all(4) |
|
| madgeAbcNetbiosNameState |
1.3.6.1.4.1.494.15.3.1.1 |
| The current state of the NetBIOS name filter. disable: Perform no action. enable: Frames sent to recognised NetBIOS names will be forwarded on the port(s) on which the names are known to exist. monitor: No filtering will be performed but the potential performance of the filter will be measured, i.e. the count and timeout keys will be incremented as if the filter was on. |
| OBJECT-TYPE |
|
|
|
| |
AbcState |
|
|
| madgeAbcNetbiosNameTimeout |
1.3.6.1.4.1.494.15.3.1.5 |
| The time for which a name will remain in the NetBIOS name cache. Default value : 78000 (centiseconds) (=13 minutes) Minimum value : 100 Maximum value : 60480000 (=1 day) |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| madgeAbcNetbiosNameForwardTimeout |
1.3.6.1.4.1.494.15.3.1.6 |
| The time for which NAME_QUERY frames for a name will be forwarded without receiving a reply. If no reply is received within this time the entry will be removed from the cache Default value : 40 (centiseconds) (=.4 seconds) Minimum value : 10 Maximum value : 6000 (=1 minute) |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| madgeAbcNetbiosAddNameState |
1.3.6.1.4.1.494.15.3.2.1 |
| The current state of the NetBIOS ADD_NAME_QUERY filter. disable: Perform no action. enable: The frequency of retries by NetBIOS stations will be limited to a certain number over a particular period of time. The number and time are configureable. monitor: No filtering will be performed but the potential performance of the filter will be measured, i.e. the count and timeout keys will be incremented as if the filter was on. |
| OBJECT-TYPE |
|
|
|
| |
AbcState |
|
|
| madgeAbcNetbiosAddNameRetryCount |
1.3.6.1.4.1.494.15.3.2.6 |
| The maximum number of times a ADD_NAME_QUERY frame will be forwarded within a given period of time. Default value : 2 Minimum value : 1 Maximum value : 10 |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| madgeAbcIpArpState |
1.3.6.1.4.1.494.15.4.1.1 |
| The current state of the ARP filter. disable: Perform no action. enable: ARP frames for recognised IP addresses will be forwarded only on the port(s) on which the IP address is known to be. monitor: No filtering will be performed but the potential performance of the filter will be measured, i.e. the count and timeout keys will be incremented as if the filter was on. |
| OBJECT-TYPE |
|
|
|
| |
AbcState |
|
|
| madgeAbcIpArpTimeout |
1.3.6.1.4.1.494.15.4.1.5 |
| The time for which an IP address will remain in the ARP cache. Default value : 60000 (centiseconds) (=10 minutes) Minimum value : 100 Maximum value : 60480000 (=1 day) |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| madgeAbcIpxRipSapSuppressState |
1.3.6.1.4.1.494.15.5.1.1 |
| The current state of the RIP/SAP suppression filter. disable: Perform no action. enable: IPX RIP and SAP Response frames will be forwarded only to those ports that have recently sourced such a frame. This reduces the number of gratuitous frames sent out on LANs that only have IPX workstations attached. monitor: No filtering will be performed but the potential performance of the filter will be measured, i.e. the count and timeout keys will be incremented as if the filter was on. |
| OBJECT-TYPE |
|
|
|
| |
AbcState |
|
|
| madgeAbcIpxRipSapSuppressTimeout |
1.3.6.1.4.1.494.15.5.1.5 |
| The time for which a port will receive RIP and SAP response frames after sourcing such a frame. Default value : 60000 (centiseconds) (=10 minutes) Minimum value : 36000 (=6 minutes) Maximum value : 720000 (=2 hours) |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| madgeAbcIpxType20FilterState |
1.3.6.1.4.1.494.15.5.2.1 |
| The current state of the IPX Type 20 filter. disable: Perform no action. enable: Only optimal Type 20 frames will be forwared onto other ports - optimal frames are those which are quicker or have shorter routing information than other frames. monitor: No filtering will be performed but the potential performance of the filter will be measured, i.e. the count and timeout keys will be incremented as if the filter was on. |
| OBJECT-TYPE |
|
|
|
| |
AbcState |
|
|
Defined Objects
| AbcState |
|
| INTEGER |
disable(1), enable(2), monitor(3) |
|
|