MADGEBOX-MIB

File: MADGEBOX-MIB.mib (65037 bytes)

Imported modules

RFC1155-SMI

Imported symbols

OBJECT-TYPE enterprises IpAddress

Defined Objects

madge 1.3.6.1.4.1.494
OBJECT IDENTIFIER    

madgeBox 1.3.6.1.4.1.494.10
OBJECT IDENTIFIER    

madgeConfig 1.3.6.1.4.1.494.10.1
OBJECT IDENTIFIER    

madgeConfigIPAddress 1.3.6.1.4.1.494.10.1.1
The IP address of the device.
OBJECT-TYPE    
  IpAddress  

madgeConfigIPGateway 1.3.6.1.4.1.494.10.1.2
The default IP gateway for the device.
OBJECT-TYPE    
  IpAddress  

madgeConfigIPSubnetMask 1.3.6.1.4.1.494.10.1.3
The IP subnet mask of the device.
OBJECT-TYPE    
  IpAddress  

madgeConfigSerialNumber 1.3.6.1.4.1.494.10.1.4
The burnt-in identifier of the device. This is a unique number and in most cases maps directly to the base MAC address of the device
OBJECT-TYPE    
  MacAddress  

madgeConfigMCodeVersion 1.3.6.1.4.1.494.10.1.5
Microcode version of the device. Stored in the format :- first Byte - not used - microcode major version number - microcode minor version number last Byte - microcode debug version number.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

madgeConfigBCodeVersion 1.3.6.1.4.1.494.10.1.6
Bootcode version of the device and the hardware version. Stored in the format :- High Byte - hardware version number - bootcode major version number - bootcode minor version number Low Byte - bootcode debug version number.
OBJECT-TYPE    
  OCTET STRING SIZE(4)  

madgeConfigMCodeFilename 1.3.6.1.4.1.494.10.1.7
Original filename for the microcode that has been downloaded to the device.
OBJECT-TYPE    
  DisplayString  

madgeConfigDeviceHealth 1.3.6.1.4.1.494.10.1.8
Current health of the device Normal - everything is fine warning - something the user should be aware of degraded - the box is operating at reduced functionality critical - a major problem exists with the device.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), degraded(3), critical(4)  

madgeConfigAdminStatus 1.3.6.1.4.1.494.10.1.9
The desired operating mode of the device. The mode can be changed by setting this object. If the device does not support the action it will return a bad value error. The behaviour of these states is device specific and some of the states may latch until the state is returned to normal. normal - standard operating mode / can be used to cancel a download or return the device from any latching state. reboot - force the device to reboot. The device will reboot into the version of flash identified by madgeConfigDefaultFlashVersion. identify - force the device to identify itself by flashing lights. This state may latch. test - force the device to do a self test. This state may latch. erase-config - erase all configuration info erase-flash - erase the version of microcode stored in the flash bank identifed by madgeConfigEraseFlashVersion. tftp-ip - force the device to start a TFTP download over IP tftp-ipx - force the device to start a TFTP download over IPX rpl-ipx - force the device to start a RPL download over IPX rpl-llc - force the device to start a RPL download over LLC halt - force the defice to shutdown ready for power off up-tftp-ip - force the device to start a TFTP upload over IP up-tftp-ipx - force the device to start a TFTP upload over IPX snapshot - force the device to take a snapshot of its current configuration
OBJECT-TYPE    
  INTEGER normal(1), reboot(2), identify(3), test(4), erase-config(5), erase-flash(6), tftp-ip(7), tftp-ipx(8), rpl-ipx(9), rpl-llc(10), halt(11), up-tftp-ip(12), up-tftp-ipx(13), snapshot(14)  

madgeConfigPassword 1.3.6.1.4.1.494.10.1.10
The case insensitive password for the device. This password is used to authenticate all SNMP SET operations. Any GET operation on this object will return PUBLIC. If an attempt is made to set the password to a string greater than the maximum a BAD VALUE error will be returned
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

madgeConfigLinkTest 1.3.6.1.4.1.494.10.1.11
An object that can be written with any value to test whether a management station knows the correct device password
OBJECT-TYPE    
  INTEGER  

madgeConfigOperStatus 1.3.6.1.4.1.494.10.1.12
The current operating mode of the device. normal - standard operating mode reboot - the device is rebooting identify - the device is identifying itself test - the device is performing a self-test downloading - the device is performing a download uploading - the device is performing an upload NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB
OBJECT-TYPE    
  INTEGER normal(1), reboot(2), identify(3), test(4), downloading(5), uploading(6)  

madgeConfigEraseFlashVersion 1.3.6.1.4.1.494.10.1.13
A valid version index for the bank of flash or a software component to erase when AdminStatus is set to erase-flash. NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB
OBJECT-TYPE    
  INTEGER  

madgeConfigDefaultFlashVersion 1.3.6.1.4.1.494.10.1.14
The version index of the default flash bank that a device will reboot into when a standard reboot is performed. NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB
OBJECT-TYPE    
  INTEGER  

madgeConfigReadPassword 1.3.6.1.4.1.494.10.1.15
The case insensitive read password for the device. This password is used to authenticate all SNMP GET and GET-NEXT operations. Any GET operation on this object will return PUBLIC. If an attempt is made to set the password to a string greater than the maximum a BAD VALUE error will be returned
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

madgeConfigSnapshotName 1.3.6.1.4.1.494.10.1.16
This specifies the name under which to store a snapshot of the current configuration.
OBJECT-TYPE    
  DisplayString  

madgeConfigDefaultSnapshot 1.3.6.1.4.1.494.10.1.17
This contains the version index of the snapshot that the device should take its configuration from on the next reboot.
OBJECT-TYPE    
  INTEGER  

madgeConfigPasswordTableSize 1.3.6.1.4.1.494.10.1.20
The size of the password table in the device. This should be a static value. A value of zero indicates no table, and that only madgeConfigPassword can be used. This object must be supported if the password table is supported.
OBJECT-TYPE    
  INTEGER  

madgeConfigPasswordTable 1.3.6.1.4.1.494.10.1.21
A static table containing a list of passwords that can be used to manage the device. Reading this table is only sensible to see a description of each password and whether it's implemented. The first entry to this table mirrors the original madgeConfigPassword and madgeConfigReadPassword. This means that it will default to Public, and that it should never be a string of zero length. Trying to set as such will result in BAD VALUE.
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeConfigPasswordEntry

madgeConfigPasswordEntry 1.3.6.1.4.1.494.10.1.21.1
An entry containing a password for the device, or not, plus a comment to remind the user which entries are what.
OBJECT-TYPE    
  MadgeConfigPasswordEntry  

madgeConfigPasswordIndex 1.3.6.1.4.1.494.10.1.21.1.1
Index into the password table
OBJECT-TYPE    
  INTEGER  

madgeConfigPasswordRead 1.3.6.1.4.1.494.10.1.21.1.2
A case insensitive Read password for the device. Any GET operation on this object will return PUBLIC if this entry is used to store a password, and return a zero length string if no password is stored. If an attempt is made to set the password to a string greater than the maximum, a BAD VALUE error will be returned. If a SET is made with a zero length string, the Password is cleared. Note: for the special case of entry 1, the value is mirrored with madgeConfigReadPassword.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

madgeConfigPasswordWrite 1.3.6.1.4.1.494.10.1.21.1.3
A case insensitive Write password for the device. Any GET operation on this object will return PUBLIC if this entry is used to store a password, and return a zero length string if no password is stored. If an attempt is made to set the password to a string greater than the maximum, a BAD VALUE error will be returned. If a SET is made with a zero length string, the Password is cleared. Note: for the special case of entry 1, the value is mirrored with madgeConfigPassword.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

madgeConfigPasswordComment 1.3.6.1.4.1.494.10.1.21.1.4
A comment that can be used by the user to remember which passwords are which.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

madgeSecure 1.3.6.1.4.1.494.10.2
OBJECT IDENTIFIER    

madgeSecureCurrentTableSize 1.3.6.1.4.1.494.10.2.1
The size of the current users table in the device. A size of zero indicates that the table is not supported.
OBJECT-TYPE    
  INTEGER  

madgeSecureCurrentTimeout 1.3.6.1.4.1.494.10.2.2
A time in seconds used to specify how long a management station will remain registered in the Current Users table if no requests are received from that management station. After this time the management station will be automatically removed from the table. Devices are not required to support the writable functionality for this variable.
OBJECT-TYPE    
  INTEGER  

madgeSecureCurrentTable 1.3.6.1.4.1.494.10.2.3
A table containing an address for all managers that are currently communicating with this device over SNMP.
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeSecureCurrentEntry

madgeSecureCurrentEntry 1.3.6.1.4.1.494.10.2.3.1
A entry containing an address for a manager that is currently communicating with this device over SNMP.
OBJECT-TYPE    
  MadgeSecureCurrentEntry  

madgeSecureCurrentIndex 1.3.6.1.4.1.494.10.2.3.1.1
Index into the table
OBJECT-TYPE    
  INTEGER  

madgeSecureCurrentType 1.3.6.1.4.1.494.10.2.3.1.2
Identifies the format of the data stored in madgeSecureCurrentAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address
OBJECT-TYPE    
  INTEGER not-used(1), ip-address(2), ipx-address(3), mac-address(4)  

madgeSecureCurrentAddress 1.3.6.1.4.1.494.10.2.3.1.3
An address of a management station that is currently communicating with this device. The format of the address is determined by the associated entry in the madgeSecureCurrentType. For type ipx-address the format is = 10 bytes.
OBJECT-TYPE    
  OCTET STRING  

madgeSecureCurrentUpdateTime 1.3.6.1.4.1.494.10.2.3.1.4
The time in seconds since the management station identified by this table entry last accessed this device. The table entry will be removed by the device once this UpdateTime reaches the value specified in madgeSecureCurrentTimeout
OBJECT-TYPE    
  INTEGER  

madgeSecureCurrentIPAddress 1.3.6.1.4.1.494.10.2.3.1.5
If madgeSecureCurrentType is set to ip-address, this variable returns the madgeSecureCurrentAddress encoded as an IP Address, rather than an Octet String
OBJECT-TYPE    
  IpAddress  

madgeSecureAllowedEnabled 1.3.6.1.4.1.494.10.2.4
Enable / disable the allowed users feature. enabled - only management stations with an address in the AllowedTable will be allowed to get / set MIB variables in this device disabled - any management station is allowed to get / set MIB variables in this device
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

madgeSecureAllowedTableSize 1.3.6.1.4.1.494.10.2.5
The size of the allowed users table in the device. A size of zero indicates that the table is not supported.
OBJECT-TYPE    
  INTEGER  

madgeSecureAllowedTable 1.3.6.1.4.1.494.10.2.6
A table containing an address for all managers that are allowed to get / set MIB variables in this device
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeSecureAllowedEntry

madgeSecureAllowedEntry 1.3.6.1.4.1.494.10.2.6.1
An entry containing an address for a manager that is allowed to get / set MIB variables in this device
OBJECT-TYPE    
  MadgeSecureAllowedEntry  

madgeSecureAllowedIndex 1.3.6.1.4.1.494.10.2.6.1.1
Index into the table
OBJECT-TYPE    
  INTEGER  

madgeSecureAllowedType 1.3.6.1.4.1.494.10.2.6.1.2
Identifies the format of the data stored in madgeSecureAllowedAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address
OBJECT-TYPE    
  INTEGER not-used(1), ip-address(2), ipx-address(3), mac-address(4)  

madgeSecureAllowedAddress 1.3.6.1.4.1.494.10.2.6.1.3
An address of a management station that is allowed to get / set MIB variables in this device. The format of the address is determined by the associated entry in the madgeSecureAllowedType. For type ipx-address the format is = 10 bytes.
OBJECT-TYPE    
  OCTET STRING  

madgeSecureAllowedIPAddress 1.3.6.1.4.1.494.10.2.6.1.4
If madgeSecureAllowedType is set to ip-address, this variable is equivalent to madgeSecureAllowedAddress encoded as an IP Address, rather than an Octet String
OBJECT-TYPE    
  IpAddress  

madgeSecureTrapDestEnabled 1.3.6.1.4.1.494.10.2.7
Enable / disable the trap destination feature. enabled - any SNMP traps generated by this device will only be sent to management stations with an address in the madgeSecureTrapDestTable disabled - any SNMP traps generated by this device will be sent to all management stations currently known by this device.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

madgeSecureTrapDestTableSize 1.3.6.1.4.1.494.10.2.8
The size of the trap destinations table in the device. A size of zero indicates that this table is not supported.
OBJECT-TYPE    
  INTEGER  

madgeSecureTrapDestTable 1.3.6.1.4.1.494.10.2.9
A table containing the address for all managers that are to receive SNMP traps generated by this device
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeSecureTrapDestEntry

madgeSecureTrapDestEntry 1.3.6.1.4.1.494.10.2.9.1
An entry containing the address for a manager that is to receive SNMP traps generated by this device
OBJECT-TYPE    
  MadgeSecureTrapDestEntry  

madgeSecureTrapDestIndex 1.3.6.1.4.1.494.10.2.9.1.1
Index into the table
OBJECT-TYPE    
  INTEGER  

madgeSecureTrapDestType 1.3.6.1.4.1.494.10.2.9.1.2
Identifies the format of the data stored in madgeSecureTrapDestAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address
OBJECT-TYPE    
  INTEGER not-used(1), ip-address(2), ipx-address(3), mac-address(4)  

madgeSecureTrapDestAddress 1.3.6.1.4.1.494.10.2.9.1.3
An address for a management station that is to receive any SNMP traps generated by this device. The format of the address is determined by the associated entry in the madgeSecureTrapDestType. For type ipx-address the format is = 10 bytes.
OBJECT-TYPE    
  OCTET STRING  

madgeSecureTrapDestIPAddress 1.3.6.1.4.1.494.10.2.9.1.4
If madgeSecureTrapDestType is set to ip-address, this variable is equivalent to madgeSecureTrapDestAddress encoded as an IP Address, rather than an Octet String
OBJECT-TYPE    
  IpAddress  

madgeDownload 1.3.6.1.4.1.494.10.3
OBJECT IDENTIFIER    

madgeDownloadIPAddress 1.3.6.1.4.1.494.10.3.1
The IP address of the server to use for the download when using TFTP-IP
OBJECT-TYPE    
  IpAddress  

madgeDownloadIPGateway 1.3.6.1.4.1.494.10.3.2
The IP gateway to be used to access the server. If this variable is zero then use the default gateway in madgeConfigIPGateway.
OBJECT-TYPE    
  IpAddress  

madgeDownloadIPXAddress 1.3.6.1.4.1.494.10.3.3
The IPX address of the server to use for the download when using TFTP-IPX or RPL-IPX. The format of the address is = 12 bytes.
OBJECT-TYPE    
  OCTET STRING SIZE(12)  

madgeDownloadNodeAddress 1.3.6.1.4.1.494.10.3.4
The Node address of the server to use for the download when using RPL-LLC
OBJECT-TYPE    
  MacAddress  

madgeDownloadFileName 1.3.6.1.4.1.494.10.3.5
The filename of the microcode to download. The maximum length of this string is device specific. If a string that is too long is written to this variable BAD VALUE will be returned.
OBJECT-TYPE    
  DisplayString  

madgeDownloadDestination 1.3.6.1.4.1.494.10.3.6
The destination for the download. This will contain the madgeVersionIndex for the download destination.
OBJECT-TYPE    
  INTEGER  

madgeDownloadState 1.3.6.1.4.1.494.10.3.7
The current state of the download
OBJECT-TYPE    
  INTEGER idle(1), tftp-waiting-ip(2), tftp-running-ip(3), tftp-waiting-ipx(4), tftp-running-ipx(5), waiting-xmodem(6), running-xmodem(7), rpl-waiting-ipx(8), rpl-running-ipx(9), rpl-waiting-llc(10), rpl-running-llc(11)  

madgeDownloadFailureCode 1.3.6.1.4.1.494.10.3.8
While a download is in progress this will always be 'no-error'. After a download is complete this indicates the success or failure of the download. If it is anything other than 'no-error' then 'madgedownloadStatusText' will contain a textual description of the error. Error codes from 100 upwards are errors returned from a TFTP server. Errors below this are locally generated.
OBJECT-TYPE    
  INTEGER no-error(1), config-error(2), busy(3), timeout(4), cancelled(5), incompatible-file(6), file-too-big(7), protocol-error(8), flash-write-error(9), undefined-error(100), file-not-found(101), access-violation(102), out-of-memory(103), illegal-operation(104), unknown-transfer-id(105), file-already-exists(106), no-such-user(107)  

madgeDownloadStatusText 1.3.6.1.4.1.494.10.3.9
A display string describing the status of the download in progress, or the reason for failure of the last download. If FailureCode = no-error then StatusText may be empty.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

madgeDownloadSize 1.3.6.1.4.1.494.10.3.10
While a download is in progress this indicates the number of bytes transferred so far. After the download is completed this remains at the final size downloaded.
OBJECT-TYPE    
  INTEGER  

madgeIP 1.3.6.1.4.1.494.10.4
OBJECT IDENTIFIER    

madgeIPCurrentAddress 1.3.6.1.4.1.494.10.4.1
The IP address that is currently being used by this device. The IP address could have been obtained from madgeConfigIPAddress or by some other means indicated by madgeIPDiscoveryMethod
OBJECT-TYPE    
  IpAddress  

madgeIPCurrentGateway 1.3.6.1.4.1.494.10.4.2
The IP gateway that is currently being used by this device. The IP gateway could have been obtained from madgeConfigIPGateway or by some other means indicated by madgeIPDiscoveryMethod
OBJECT-TYPE    
  IpAddress  

madgeIPCurrentSubnetMask 1.3.6.1.4.1.494.10.4.3
The IP Subnet Mask that is currently being used by this device. The IP Subnet Mask could have been obtained from madgeConfigIPSubnetMask or by some other means indicated by madgeIPDiscoveryMethod
OBJECT-TYPE    
  IpAddress  

madgeIPDiscoveryMethod 1.3.6.1.4.1.494.10.4.4
The source of the currently used IP address, gateway and subnet mask.
OBJECT-TYPE    
  INTEGER not-discovered(1), via-config(2), via-bootp(3), via-rarp(4), via-dhcp(5)  

madgeIPBootpEnabled 1.3.6.1.4.1.494.10.4.5
Enable / Disable the use of BootP for IP address discovery
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-supported(3)  

madgeIPRarpEnabled 1.3.6.1.4.1.494.10.4.6
Enable / Disable the use of RARP for IP address discovery
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-supported(3)  

madgeIPDHCPEnabled 1.3.6.1.4.1.494.10.4.7
Enable / Disable the use of DHCP for IP address discovery
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-supported(3)  

madgeVersion 1.3.6.1.4.1.494.10.5
OBJECT IDENTIFIER    

madgeVersionTable 1.3.6.1.4.1.494.10.5.1
A table containing version information for all hardware / software components in a device.
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeVersionEntry

madgeVersionEntry 1.3.6.1.4.1.494.10.5.1.1
An entry containing version information for a hardware / software component in a device.
OBJECT-TYPE    
  MadgeVersionEntry  

madgeVersionIndex 1.3.6.1.4.1.494.10.5.1.1.1
Index into the table
OBJECT-TYPE    
  INTEGER  

madgeVersionDescription 1.3.6.1.4.1.494.10.5.1.1.2
A string containing a textual description for the component identified by this entry.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

madgeVersionLocation 1.3.6.1.4.1.494.10.5.1.1.3
A string containing a textual description of the location of the component identified by this entry. eg Flash Bank A Flash ROM Boot ROM Boot Bank A Base Hardware Hardware Module
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

madgeVersionNumber 1.3.6.1.4.1.494.10.5.1.1.4
Version number for the component. Stored in the format :- first Byte - major version number - minor version number last Byte - debug version number.
OBJECT-TYPE    
  OCTET STRING SIZE(3)  

madgeVersionType 1.3.6.1.4.1.494.10.5.1.1.5
The type of object that this table entry contains version information for. flash : code image resident in flash OR the flash bank itself boot-fixed : the version of the fixed boot ROM. boot-updateable : the current version of boot ROM code where the code can be updated. hardware-fixed : Hardware that cannot be upgraded. hardware-upgradeable : a plug in card that can be changed. sw-running : code image that is currently running in RAM. sw-config : a configuration file. This item may be uploaded or downloaded, to configure the device. sw-image : a subcomponent of the entire software. Can be resident in flash or ram. These items should be placed in the version table following the version of which they are a subcomponent.
OBJECT-TYPE    
  INTEGER flash(1), boot-fixed(2), boot-updateable(3), hardware-fixed(4), hardware-upgradeable(5), other(6), sw-running(7), sw-config(8), sw-image(9), unknown(20)  

madgeVersionCount 1.3.6.1.4.1.494.10.5.2
The number of entries in the version table
OBJECT-TYPE    
  INTEGER  

madgeTrap 1.3.6.1.4.1.494.10.6
OBJECT IDENTIFIER    

madgeTrapTable 1.3.6.1.4.1.494.10.6.1
A table containing information about all of the traps that can be generated by a device. Each trap can be enabled / disabled, and a count is kept to indicate the number of traps generated.
OBJECT-TYPE    
  SEQUENCE OF  
    MadgeTrapEntry

madgeTrapEntry 1.3.6.1.4.1.494.10.6.1.1
An entry containing information about a single trap.
OBJECT-TYPE    
  MadgeTrapEntry  

madgeTrapIndex 1.3.6.1.4.1.494.10.6.1.1.1
Index into the table
OBJECT-TYPE    
  INTEGER  

madgeTrapDescription 1.3.6.1.4.1.494.10.6.1.1.2
A string containing a textual description for the trap identified by this entry.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

madgeTrapEnterprise 1.3.6.1.4.1.494.10.6.1.1.3
The enterprise identifier for the type of object generating the trap.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

madgeTrapSpecificTrap 1.3.6.1.4.1.494.10.6.1.1.4
Trap specific code to identify this trap.
OBJECT-TYPE    
  INTEGER  

madgeTrapSeverity 1.3.6.1.4.1.494.10.6.1.1.5
The severity of this particular trap
OBJECT-TYPE    
  INTEGER unknown(1), critical(2), major(3), minor(4), warning(5), informational(6)  

madgeTrapEnable 1.3.6.1.4.1.494.10.6.1.1.6
The enable state of this particular trap.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

madgeTrapEnableDefault 1.3.6.1.4.1.494.10.6.1.1.7
The default enable state for this particular trap When the device is reset or madgeTrapDefaultAll is set to reset.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

madgeTrapCounter 1.3.6.1.4.1.494.10.6.1.1.8
A count of the number of times this trap has been generated since the device was started, or since madgeTrapResetCounters was set to reset.
OBJECT-TYPE    
  INTEGER  

madgeTrapEnableAll 1.3.6.1.4.1.494.10.6.2
Enable / disable the generation of all traps by the device. When set to disabled - no traps are generated. When set to enabled - only traps with madgeTrapEnable = enabled are generated.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

madgeTrapResetCounters 1.3.6.1.4.1.494.10.6.3
To reset all of the counters in the madgeTrap table set this variable to reset. During the reset the device will return 'resetting' in response to a GET request. When the reset is complete the device will return normal in response to a GET request.
OBJECT-TYPE    
  INTEGER normal(1), reset(2), resetting(3)  

madgeTrapDefaultAll 1.3.6.1.4.1.494.10.6.4
To return all of the entries in the madgeTrap table to their default enable state set this variable to reset. During the reset the device will return 'resetting' in response to a GET request. When the reset is complete the device will return normal in response to a GET request.
OBJECT-TYPE    
  INTEGER normal(1), reset(2), resetting(3)  

madgeTrapMessage 1.3.6.1.4.1.494.10.6.5
A textual description for the current trap. This variable can be included in an SNMP TRAP to provide a complete reason for the TRAP.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

madgeUpload 1.3.6.1.4.1.494.10.7
OBJECT IDENTIFIER    

madgeUploadIPAddress 1.3.6.1.4.1.494.10.7.1
The IP address of the server to use for the upload when using TFTP-IP
OBJECT-TYPE    
  IpAddress  

madgeUploadIPGateway 1.3.6.1.4.1.494.10.7.2
The IP gateway to be used to access the server. If this variable is zero then use the default gateway in madgeConfigIPGateway.
OBJECT-TYPE    
  IpAddress  

madgeUploadIPXAddress 1.3.6.1.4.1.494.10.7.3
The IPX address of the server to use for the upload when using TFTP-IPX. The format of the address is = 12 bytes.
OBJECT-TYPE    
  OCTET STRING SIZE(12)  

madgeUploadFileName 1.3.6.1.4.1.494.10.7.4
The filename under which to store the uploaded microcode. The maximum length of this string is device specific. If a string that is too long is written to this variable BAD VALUE will be returned.
OBJECT-TYPE    
  DisplayString  

madgeUploadSource 1.3.6.1.4.1.494.10.7.5
The source for the upload. This will contain the madgeVersionIndex for the upload source.
OBJECT-TYPE    
  INTEGER  

madgeUploadState 1.3.6.1.4.1.494.10.7.6
The current state of the Upload
OBJECT-TYPE    
  INTEGER idle(1), tftp-waiting-ip(2), tftp-running-ip(3), tftp-waiting-ipx(4), tftp-running-ipx(5)  

madgeUploadFailureCode 1.3.6.1.4.1.494.10.7.7
While an upload is in progress this will always be 'no-error'. After an upload is complete this indicates the success or failure of the upload. If it is anything other than 'no-error' then 'madgeUploadStatusText' will contain a textual description of the error. Error codes from 100 upwards are errors returned from a TFTP server. Errors below this are locally generated.
OBJECT-TYPE    
  INTEGER no-error(1), config-error(2), busy(3), timeout(4), cancelled(5), incompatible-file(6), file-too-big(7), protocol-error(8), flash-write-error(9), undefined-error(100), file-not-found(101), access-violation(102), out-of-memory(103), illegal-operation(104), unknown-transfer-id(105), file-already-exists(106), no-such-user(107)  

madgeUploadStatusText 1.3.6.1.4.1.494.10.7.8
A display string describing the status of the upload in progress, or the reason for failure of the last upload. If FailureCode = no-error then StatusText may be empty.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

madgeUploadSize 1.3.6.1.4.1.494.10.7.9
While an upload is in progress this indicates the number of bytes transferred so far. After the upload is completed this remains at the final size uploaded.
OBJECT-TYPE    
  INTEGER  

Defined Objects

DisplayString  
OCTET STRING    

MacAddress  
OCTET STRING SIZE(6)    

MadgeConfigPasswordEntry  
SEQUENCE    
  INTEGER as madgeConfigPasswordIndex  
  DisplayString as madgeConfigPasswordRead  
  DisplayString as madgeConfigPasswordWrite  
  DisplayString as madgeConfigPasswordComment  

MadgeSecureCurrentEntry  
SEQUENCE    
  INTEGER as madgeSecureCurrentIndex  
  INTEGER as madgeSecureCurrentType  
  OCTET STRING as madgeSecureCurrentAddress  
  INTEGER as madgeSecureCurrentUpdateTime  
  IpAddress as madgeSecureCurrentIPAddress  

MadgeSecureAllowedEntry  
SEQUENCE    
  INTEGER as madgeSecureAllowedIndex  
  INTEGER as madgeSecureAllowedType  
  OCTET STRING as madgeSecureAllowedAddress  
  IpAddress as madgeSecureAllowedIPAddress  

MadgeSecureTrapDestEntry  
SEQUENCE    
  INTEGER as madgeSecureTrapDestIndex  
  INTEGER as madgeSecureTrapDestType  
  OCTET STRING as madgeSecureTrapDestAddress  
  IpAddress as madgeSecureTrapDestIPAddress  

MadgeVersionEntry  
SEQUENCE    
  INTEGER as madgeVersionIndex  
  DisplayString as madgeVersionDescription  
  DisplayString as madgeVersionLocation  
  OCTET STRING as madgeVersionNumber  
  INTEGER as madgeVersionType  

MadgeTrapEntry  
SEQUENCE    
  INTEGER as madgeTrapIndex  
  DisplayString as madgeTrapDescription  
  OBJECT IDENTIFIER as madgeTrapEnterprise  
  INTEGER as madgeTrapSpecificTrap  
  INTEGER as madgeTrapSeverity  
  INTEGER as madgeTrapEnable  
  INTEGER as madgeTrapEnableDefault  
  INTEGER as madgeTrapCounter