MADGERSW-MIB

File: MADGERSW-MIB.mib (203156 bytes)

Imported modules

RFC1155-SMI RFC-1215

Imported symbols

IpAddress OBJECT-TYPE enterprises
TRAP-TYPE

Defined Objects

madge 1.3.6.1.4.1.494
OBJECT IDENTIFIER    

ringswitch 1.3.6.1.4.1.494.4
OBJECT IDENTIFIER    

ringswitchBase 1.3.6.1.4.1.494.4.1
OBJECT IDENTIFIER    

fanPSSpeedFailed 1.3.6.1.4.1.494.4.1
This trap is sent when the Power Supply fan has failed.
TRAP-TYPE    
  ringswitchBasePSFanSpeed  

ringswitchBasePSFanSpeed 1.3.6.1.4.1.494.4.1.1
The number of revolutions per minute being reported by the fan internal to the system power supply. If this value is read as zero, the fan is no longer operating
OBJECT-TYPE    
  INTEGER  

ringswitchBaseExtFanSpeed 1.3.6.1.4.1.494.4.1.2
The number of revolutions per minute being reported by the external system fan. If this value is read as zero, the fan is no longer operating
OBJECT-TYPE    
  INTEGER  

ringswitchBaseRipSapSuppression 1.3.6.1.4.1.494.4.1.3
If this variable is set to enable the system will only forward broadcast-addressed IPX RIP and SAP Response frames to those ports that have recently sourced such a frame. This reduces the number of gratuitous frames sent out on LANs that only have IPX workstations attached. A value of disable causes no special action to be taken for such frames.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchBaseAREConversion 1.3.6.1.4.1.494.4.1.4
This variable controls the action taken when forwarding All Routes Explorer frames. enable-first: convert all ARE frames with a RIF length of 2 to STE frames. enable-all: convert all ARE frames to STE frames. enable-bcast-first: convert all ARE frames with the broadcast destination address, with a RIF length of 2 to STE frames. enable-bcast-all: convert all ARE frames with the broadcast destination address to STE frames. disable: follow normal forwarding rules for ARE frames.
OBJECT-TYPE    
  INTEGER enable-first(1), enable-all(2), enable-bcast-first(3), enable-bcast-all(4), disable(5)  

ringswitchBaseStpMode 1.3.6.1.4.1.494.4.1.5
This selects the mode of operation of the spanning tree protocol. When set to ibm-sr, spanning tree protocol BPDUs are sent to the 802.5 LBS functional address on all interface types, and TCN BPDUs are not generated. When set to ieee8021d, TCN BPDUs are generated, and the IEEE 802.1D group address (01 80 C2 00 00 00 in canonical form) is used as the destination address for BPDUs on interfaces of types other than 802.5
OBJECT-TYPE    
  INTEGER ibm-sr(1), ieee8021d(2)  

ringswitchBaseRMONState 1.3.6.1.4.1.494.4.1.6
Setting this to 'enable' activates the RMON probe function in the Ringswitch. When RMON has been enabled it is configured according to ringswitchBaseRMONMirrorPort, ringswitchPortRMONMode and ringswitchPortRMONSnoop mib entries. Setting it to 'disable' de-activates the RMON probe function. When RMON is disabled, all other RMON related mib entries defined by the Madge Ringwitch MIB will be ignored (but their values will still be settable). ringswitchBaseRMONState defaults to 'disable'.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchBaseBackPlaneType 1.3.6.1.4.1.494.4.1.7
This variable reports the type of chassis that the Ringswitch is mounted in.
OBJECT-TYPE    
  INTEGER original(1), dual-psu(2), express(3)  

ringswitchBaseRMONMirrorPort 1.3.6.1.4.1.494.4.1.8
This variable controls the RMON mirroring facility. A value of 0 means mirroring is disabled. Mirroring is enabled by setting this variable to the ifNumber of the port to which mirroring will apply and by setting ringswitchBaseRMONState to 'enable'. When mirroring is enabled, the Ringswitch sends all RMON related traffic to the mirror port (except for MAC frames).
OBJECT-TYPE    
  INTEGER  

ringswitchBaseTotalResetCounters 1.3.6.1.4.1.494.4.1.9
Use this variable to reset all the counters on the Ringswitch, including those in the ringswitchGenPort, dot1dSRPort, ifEntry and fddimib groups.
OBJECT-TYPE    
  INTEGER reset(1)  

ringswitchBaseDownloadMode 1.3.6.1.4.1.494.4.1.10
Use this variable to select the mode for all subsequent download operations. normal - device will enter the loader prior to downloading. active - device will NOT enter the loader and perform the download online.
OBJECT-TYPE    
  INTEGER normal(1), active(2)  

ringswitchPort 1.3.6.1.4.1.494.4.2
OBJECT IDENTIFIER    

fanExtSpeedFailed 1.3.6.1.4.1.494.4.2
This trap is sent when the external fan has failed.
TRAP-TYPE    
  ringswitchBaseExtFanSpeed  

ringswitchPortTable 1.3.6.1.4.1.494.4.2.1
A table that contains general port information.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchPortEntry

ringswitchPortEntry 1.3.6.1.4.1.494.4.2.1.1
OBJECT-TYPE    
  RingswitchPortEntry  

ringswitchPortNum 1.3.6.1.4.1.494.4.2.1.1.1
The port number of the port for which this entry contains Ringswitch management information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchPortRingStatus 1.3.6.1.4.1.494.4.2.1.1.2
The status of the ring to which this port is connected. normal: Inserted into Classic ring single: Single Station beaconing: Beaconing Detected normal-fdx: DTR link in full duplex (TXI) mode dtr-wait: DTR Concentrator port waiting for attached station to insert
OBJECT-TYPE    
  INTEGER normal(1), single(2), beaconing(3), normal-fdx(4), dtr-wait(5)  

ringswitchPortAdapterStatus 1.3.6.1.4.1.494.4.2.1.1.3
The status of the adapter used by this port.
OBJECT-TYPE    
  INTEGER open(1), closed(2), opening(3)  

ringswitchPortMediaType 1.3.6.1.4.1.494.4.2.1.1.4
Media type of the port.
OBJECT-TYPE    
  INTEGER tr-copper(1), tr-fiber(2), fddi-fiber(3), absent(4)  

ringswitchPortIfMode 1.3.6.1.4.1.494.4.2.1.1.5
Node or concentrator status of the port.
OBJECT-TYPE    
  INTEGER node(1), concentrator(2), node-fdx(3), conc-fdx(4), node-classic(5), conc-classic(6), node-cau-rio(7)  

ringswitchPortRingSpeed 1.3.6.1.4.1.494.4.2.1.1.6
Speed of the ring to which this port is connected.
OBJECT-TYPE    
  INTEGER four(1), sixteen(2), hundred(3)  

ringswitchPortTestState 1.3.6.1.4.1.494.4.2.1.1.7
Current state of the bridge test.
OBJECT-TYPE    
  INTEGER disabled(1), running(2), failed(3), ok(4), unknown(5)  

ringswitchPortTestError 1.3.6.1.4.1.494.4.2.1.1.8
Result of the bridge test.
OBJECT-TYPE    
  INTEGER no-error(1), same-ring(2), duplicate-ring(3), fail-nb(4), bad-rnum(5), fail-b(6)  

ringswitchPortTestPhase 1.3.6.1.4.1.494.4.2.1.1.9
Current phase of the bridge test.
OBJECT-TYPE    
  INTEGER not-running(1), same-ring(2), routed(3), broadcast(4), success(5)  

ringswitchPortSummary 1.3.6.1.4.1.494.4.2.1.1.10
This is a four octet field which packs some of the port attributes into a single mib entry. Each nibble represents a different attribute of the port: ifAdminStatus (most significant), ringswitchPortRingStatus, ringswitchPortAdapterStatus, ringswitchPortMediaType, ringswitchPortIfMode, ringswitchPortRingSpeed, ringswitchPortTestState, ringswitchPortTestError (least significant)
OBJECT-TYPE    
  INTEGER  

ringswitchPortAddress 1.3.6.1.4.1.494.4.2.1.1.11
The hard wired address of the port.
OBJECT-TYPE    
  TRNMacAddress  

ringswitchPortLAA 1.3.6.1.4.1.494.4.2.1.1.12
The locally administered address of the port.
OBJECT-TYPE    
  TRNMacAddress  

ringswitchPortStationType 1.3.6.1.4.1.494.4.2.1.1.13
Workstations-only status of the port; if this is limited, the port only has workstations on it, and broadcast frames received on this port will not be transmitted on other limited ports.
OBJECT-TYPE    
  INTEGER anything(1), workstations(2)  

ringswitchPortRPSEnable 1.3.6.1.4.1.494.4.2.1.1.14
Enables or disables the Ring Parameter Server function on the port. If this variable is set to enabled, the port will enable the RPS functional address, and respond to Request Parameters MAC frames, supplying the port's segment number in the response.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchPortCutThruEnable 1.3.6.1.4.1.494.4.2.1.1.15
Enables or disables cut-through switching on the port. In some circumstances (e.g., 4 to 16 MB switching), cut-through will always be disabled, irrespective of the state of this variable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchPortInOctets 1.3.6.1.4.1.494.4.2.1.1.16
48 bit version of the interface MIB counter ifInOctets.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortOutOctets 1.3.6.1.4.1.494.4.2.1.1.17
48 bit version of the interface MIB counter ifOutOctets.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortSpecInFrames 1.3.6.1.4.1.494.4.2.1.1.18
48 bit version of the Bridge MIB counter srPortSpecInFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortSpecOutFrames 1.3.6.1.4.1.494.4.2.1.1.19
48 bit version of the Bridge MIB counter srPortSpecOutFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortApeInFrames 1.3.6.1.4.1.494.4.2.1.1.20
48 bit version of the Bridge MIB counter srPortApeInFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortApeOutFrames 1.3.6.1.4.1.494.4.2.1.1.21
48 bit version of the Bridge MIB counter srPortApeOutFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortSteInFrames 1.3.6.1.4.1.494.4.2.1.1.22
48 bit version of the Bridge MIB counter srPortSteInFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortSteOutFrames 1.3.6.1.4.1.494.4.2.1.1.23
48 bit version of the Bridge MIB counter srPortSteOutFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortResetCounters 1.3.6.1.4.1.494.4.2.1.1.24
Use this variable to reset all the counters on this port, including those in the ringswitchPort, dot1dSRPort, ifEntry and fddimib groups.
OBJECT-TYPE    
  INTEGER reset(1)  

ringswitchPortFixupMode 1.3.6.1.4.1.494.4.2.1.1.25
This MIB variable controls operation of protocol fixups on an FDDI linecard. When set to fddi-all, embedded MAC addresses in frames are bit-reversed to convert the frames into native FDDI format
OBJECT-TYPE    
  INTEGER disabled(1), fddi-all(2)  

ringswitchPortForwardMode 1.3.6.1.4.1.494.4.2.1.1.26
This MIB variable controls the bridging modes that are enabled on this port. Any combination of the two types of bridging - transparent and source routing can be enabled/disabled.
OBJECT-TYPE    
  INTEGER sr-only(1), tb-only(2), sr-tb(3)  

ringswitchPortRMONCapabilities 1.3.6.1.4.1.494.4.2.1.1.27
A value that indicates the RMON capabilities of the port. The value represents the highest level RMON mode which the port can support. 'disabled' is the lowest level and indicates no RMON capabilities 'snooping' is the highest level and indicates that the port is capable of running in all RMON modes
OBJECT-TYPE    
  INTEGER disabled(1), economy(2), standard(3), snooping(4)  

ringswitchPortRMONMode 1.3.6.1.4.1.494.4.2.1.1.28
Controls the types of frames passed to the RMON probe function for processing as follows: disabled - no frames passed to the RMON probe economy - MAC frames required for token ring specific groups as follows: MLStats table Token Ring Ring station table standard - all frames snooping - all frames provided by the 'economy' mode plus any frames originating from or destined for the 'snoop address' controlled by ringswitchPortRMONSnoop
OBJECT-TYPE    
  INTEGER disabled(1), economy(2), standard(3), snooping(4)  

ringswitchPortRMONSnoop 1.3.6.1.4.1.494.4.2.1.1.29
This controls the RMON snoop address used when ringswitchPortRMONMode is set to 'snooping'. A value of all zeroes results in no snooping taking place.
OBJECT-TYPE    
  TRNMacAddress  

ringswitchPortTransparentInFrames 1.3.6.1.4.1.494.4.2.1.1.30
48 bit version of the Bridge MIB counter TpPortInFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortTransparentOutFrames 1.3.6.1.4.1.494.4.2.1.1.31
48 bit version of the Bridge MIB counter TpPortOutFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortTransparentDiscFrames 1.3.6.1.4.1.494.4.2.1.1.32
48 bit version of the Bridge MIB counter TpPortInDiscards.
OBJECT-TYPE    
  INTEGER48  

ringswitchPortLEDs 1.3.6.1.4.1.494.4.2.1.1.33
An octet string containing the colour of every LED on the port, one per octet: off (1), on-red (2), on-green (3), on-yellow (4), flash-red (5), flash-green (6), flash-yellow (7), flash-blue (8), flash-green-anti-phase (9), flash-yellow-anti-phase (10)
OBJECT-TYPE    
  OCTET STRING  

ringswitchFwd 1.3.6.1.4.1.494.4.3
OBJECT IDENTIFIER    

portFailed 1.3.6.1.4.1.494.4.3
This trap is sent when a port has auto-closed or failed to open.
TRAP-TYPE    
  ringswitchPortAdapterStatus  

ringswitchFwdAdminState 1.3.6.1.4.1.494.4.3.1
The desired state of the switches forwarding modes. This allows source routing and/or transparent bridging to be enabled/disabled for the whole Ringswitch
OBJECT-TYPE    
  INTEGER sr-only(1), disable(2), tb-only(3), srt(4), srt-plus(5)  

ringswitchFwdOperState 1.3.6.1.4.1.494.4.3.2
The actual state of switches forwarding modes. If for some reason the switch is unable operate in the mode requested then the operating state may differ from the AdminState.
OBJECT-TYPE    
  INTEGER sr-only(1), inactive(2), tb-only(3), srt(4), srt-plus(5)  

ringswitchFwdPortTable 1.3.6.1.4.1.494.4.3.3
A table that contains forwarding information about every port that is associated with this Ringswitch. Transparent, source-route, srt and srt plus ports are included.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchFwdPortEntry

ringswitchFwdPortEntry 1.3.6.1.4.1.494.4.3.3.1
A list of forwarding information for each port of the Ringswitch.
OBJECT-TYPE    
  RingswitchFwdPortEntry  

ringswitchFwdPort 1.3.6.1.4.1.494.4.3.3.1.1
The port number of the port for which this entry contains forwarding information. This value is the same as the value of dot1dBasePort for the equivalent port.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchFwdPortMode 1.3.6.1.4.1.494.4.3.3.1.2
This MIB variable controls the bridging modes that are enabled on this port. Any combination of the two types of bridging - transparent and source routing can be enabled/disabled.
OBJECT-TYPE    
  INTEGER sr-only(1), tb-only(2), sr-tb(3)  

ringswitchFwdPortStationType 1.3.6.1.4.1.494.4.3.3.1.3
Workstations-only status of the port; if this is limited, the port only has workstations on it, and broadcast frames received on this port will not be transmitted on other limited ports.
OBJECT-TYPE    
  INTEGER anything(1), workstations(2)  

ringswitchFwdPortCutThruEnable 1.3.6.1.4.1.494.4.3.3.1.4
Enables or disables cut-through switching on the port. In some circumstances (e.g., 4 to 16 MB switching), cut-through will always be disabled, irrespective of the state of this variable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchFwdPortSpecInFrames 1.3.6.1.4.1.494.4.3.3.1.5
48 bit version of the Bridge MIB counter srPortSpecInFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortSpecOutFrames 1.3.6.1.4.1.494.4.3.3.1.6
48 bit version of the Bridge MIB counter srPortSpecOutFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortApeInFrames 1.3.6.1.4.1.494.4.3.3.1.7
48 bit version of the Bridge MIB counter srPortApeInFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortApeOutFrames 1.3.6.1.4.1.494.4.3.3.1.8
48 bit version of the Bridge MIB counter srPortApeOutFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortSteInFrames 1.3.6.1.4.1.494.4.3.3.1.9
48 bit version of the Bridge MIB counter srPortSteInFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortSteOutFrames 1.3.6.1.4.1.494.4.3.3.1.10
48 bit version of the Bridge MIB counter srPortSteOutFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTransparentInFrames 1.3.6.1.4.1.494.4.3.3.1.11
48 bit version of the Bridge MIB counter TpPortInFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTransparentOutFrames 1.3.6.1.4.1.494.4.3.3.1.12
48 bit version of the Bridge MIB counter TpPortOutFrames.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTransparentDiscFrames 1.3.6.1.4.1.494.4.3.3.1.13
48 bit version of the Bridge MIB counter TpPortInDiscards.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTestState 1.3.6.1.4.1.494.4.3.3.1.14
Current state of the bridge test.
OBJECT-TYPE    
  INTEGER disabled(1), running(2), failed(3), ok(4), unknown(5), ok-use-spt(6)  

ringswitchFwdPortTestError 1.3.6.1.4.1.494.4.3.3.1.15
Result of the bridge test.
OBJECT-TYPE    
  INTEGER no-error(1), same-ring(2), duplicate-ring(3), fail-nb(4), bad-rnum(5), fail-b(6)  

ringswitchFwdPortTestPhase 1.3.6.1.4.1.494.4.3.3.1.16
Current phase of the bridge test.
OBJECT-TYPE    
  INTEGER not-running(1), same-ring(2), routed(3), broadcast(4), success(5)  

ringswitchFwdPortTbForce 1.3.6.1.4.1.494.4.3.3.1.17
If this variable is set to enable, transparent forwarding will be enabled, regardless of the spanning tree state machine.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchFwdPortStpMaster 1.3.6.1.4.1.494.4.3.3.1.18
If this variable is non-zero, it is the interface number of another port, and the spanning tree state machine will be slaved to that port. A port may not be slaved to itself, to any other slaved port, or to a port where transparent bridging is forced (see description of ringswitchFwdPortTbForce).
OBJECT-TYPE    
  INTEGER  

ringswitchFwdPortTbState 1.3.6.1.4.1.494.4.3.3.1.19
The current transparent bridging state.
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

ringswitchFwdPortSteState 1.3.6.1.4.1.494.4.3.3.1.20
The current spanning tree explorer propagation state.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchFwdPortTbUnicastInFrames 1.3.6.1.4.1.494.4.3.3.1.21
The number of unicast frames received by this port and transparently forwarded to another port.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTbUnicastOutFrames 1.3.6.1.4.1.494.4.3.3.1.22
The number of unicast frames transmitted by this port having been transparently forwarded from another port.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTbBroadcastInFrames 1.3.6.1.4.1.494.4.3.3.1.23
The number of broadcast frames received by this port and transparently forwarded to other ports.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTbBroadcastOutFrames 1.3.6.1.4.1.494.4.3.3.1.24
The number of broadcast frames transmitted by this port having been transparently forwarded from another port.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTbMulticastInFrames 1.3.6.1.4.1.494.4.3.3.1.25
The number of multicast frames received by this port and transparently forwarded to other ports.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTbMulticastOutFrames 1.3.6.1.4.1.494.4.3.3.1.26
The number of multicast frames transmitted by this port having been transparently forwarded from another port.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTbMiscInFrames 1.3.6.1.4.1.494.4.3.3.1.27
The number of unicast frames received by this port and transparently forwarded (flooded) to other ports.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortTbMiscOutFrames 1.3.6.1.4.1.494.4.3.3.1.28
The number of unicast frames transmitted by this port having been transparently forwarded (flooded) from another port.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdPortMatrixSrSpecFrames 1.3.6.1.4.1.494.4.3.3.1.29
This string contains a count of the specifically routed frames that have been switched from port ringswitchFwdPortNum to each of the possible ports on the ringswitch. The string contains one four byte entry (MSB first) per port.
OBJECT-TYPE    
  OCTET STRING  

ringswitchFwdPortMatrixTbUniFrames 1.3.6.1.4.1.494.4.3.3.1.30
This string contains a count of the transparent unicast frames that have been switched from port ringswitchFwdPortNum to each of the possible ports on the ringswitch. The string contains one four byte entry (MSB first) per port.
OBJECT-TYPE    
  OCTET STRING  

ringswitchFwdPortEthernetSRBlk 1.3.6.1.4.1.494.4.3.3.1.31
If this variable is enabled, on an Ethernet LEC port, then the switch will treat any SR frame (STE, ARE or SRF) going to or from this port as an STE for the purposes of deciding whether to forward it or block it. If it is disabled then the normal SR rules apply. It is ignored for non Ethernet-LEC ports.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchFwdPortAutoPathCost 1.3.6.1.4.1.494.4.3.3.1.32
If this variable is enabled on a switch running microcode >= R3.3 then the spanning tree cost for this port will be selected automatically.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchFwdPortBroadcastReflect 1.3.6.1.4.1.494.4.3.3.1.33
If this variable is enabled on a switch running microcode >= v4.08.01 then, on a DTR link, broadcast frames will be reflected back to the node.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchFwdTotalRxFrames 1.3.6.1.4.1.494.4.3.4
The total number of received frames switched.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTxFrames 1.3.6.1.4.1.494.4.3.5
The total number of transmitted frames switched.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdBridgeNum 1.3.6.1.4.1.494.4.3.6
The global bridge number of the Ringswitch.
OBJECT-TYPE    
  INTEGER 0..15  

ringswitchFwdTbForced 1.3.6.1.4.1.494.4.3.7
An octet string containing the transparent force state of every port on the Ringswitch. See the description of ringswitchFwdPortTbForce for details.
OBJECT-TYPE    
  OCTET STRING  

ringswitchFwdStpMasters 1.3.6.1.4.1.494.4.3.8
An octet string containing one octet for each port on the Ringswitch. If an octet is non-zero, it is the interface number of another port, and the spanning tree state machine is slaved to that port. See description of ringswitchFwdPortStpMaster for details.
OBJECT-TYPE    
  OCTET STRING  

ringswitchFwdGlobalHopLimit 1.3.6.1.4.1.494.4.3.9
The maximum number of source routing hops that the Ringswitch will forward on any port. This limit is applied to all types of source route frame including all routes explorer frames where it modifies the port hop count limits defined by dot1dSrPortHopCount.
OBJECT-TYPE    
  INTEGER 1..13  

ringswitchFwdTotalBadFrames 1.3.6.1.4.1.494.4.3.10
The total number of incoming frames discarded because of some error. This is the sum of the SR bridge error counters and CRC errors.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalSpecInFrames 1.3.6.1.4.1.494.4.3.11
This is the sum of the dot1dSrPortSpecInFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalSpecOutFrames 1.3.6.1.4.1.494.4.3.12
This is the sum of the dot1dSrPortSpecOutFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalApeInFrames 1.3.6.1.4.1.494.4.3.13
This is the sum of the dot1dSrPortApeInFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalApeOutFrames 1.3.6.1.4.1.494.4.3.14
This is the sum of the dot1dSrPortApeOutFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalSteInFrames 1.3.6.1.4.1.494.4.3.15
This is the sum of the dot1dSrPortSteInFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalSteOutFrames 1.3.6.1.4.1.494.4.3.16
This is the sum of the dot1dSrPortSteOutFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTransparentInFrames 1.3.6.1.4.1.494.4.3.17
This is the sum of the TpPortInFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTransparentOutFrames 1.3.6.1.4.1.494.4.3.18
This is the sum of the TpPortOutFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTpUnicastInFrames 1.3.6.1.4.1.494.4.3.19
This is the sum of the ringswitchFwdPortTbUnicastInFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTpUnicastOutFrames 1.3.6.1.4.1.494.4.3.20
This is the sum of the ringswitchFwdPortTbUnicastOutFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTpBroadcastInFrames 1.3.6.1.4.1.494.4.3.21
This is the sum of the ringswitchFwdPortTbBroadcastInFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTpBroadcastOutFrames 1.3.6.1.4.1.494.4.3.22
This is the sum of the ringswitchFwdPortTbBroadcastOutFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTpMulticastInFrames 1.3.6.1.4.1.494.4.3.23
This is the sum of the ringswitchFwdPortTbMulticastInFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTpMulticastOutFrames 1.3.6.1.4.1.494.4.3.24
This is the sum of the ringswitchFwdPortTbMulticastOutFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTpMiscInFrames 1.3.6.1.4.1.494.4.3.25
This is the sum of the ringswitchFwdPortTbMiscInFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdTotalTpMiscOutFrames 1.3.6.1.4.1.494.4.3.26
This is the sum of the ringswitchFwdPortTbMiscOutFrames counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchFwdMaxFrameSize 1.3.6.1.4.1.494.4.3.27
Maximum frame size the switch will forward.
OBJECT-TYPE    
  INTEGER use18K-frames(1), use4500-frames(2)  

ringswitchLCD 1.3.6.1.4.1.494.4.4
OBJECT IDENTIFIER    

brTestFailed 1.3.6.1.4.1.494.4.4
This trap is sent when the bridge test on a port fails.
TRAP-TYPE    
  ringswitchPortTestError  

ringswitchLCDTotalDisplays 1.3.6.1.4.1.494.4.4.1
The total number of displays on the Ringswitch.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchLCDCurrentDisplay 1.3.6.1.4.1.494.4.4.2
The number of the display that the Ringswitch is currently showing.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchLCDCurrentMsgText 1.3.6.1.4.1.494.4.4.3
The actual lcd message text, including a carriage return after the first line, and a null character after the second line.
OBJECT-TYPE    
  LCDText  

ringswitchLCDTable 1.3.6.1.4.1.494.4.4.4
A table that contains all of the lcd messages that could be displayed by the Ringswitch if the user were to flick the paddle switch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchLCDTableEntry

ringswitchLCDTableEntry 1.3.6.1.4.1.494.4.4.4.1
Arguments and message number details for each LCD entry.
OBJECT-TYPE    
  RingswitchLCDTableEntry  

ringswitchLCDNum 1.3.6.1.4.1.494.4.4.4.1.1
The lcd number of the lcd for which this entry contains display details.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchLCDMsgText 1.3.6.1.4.1.494.4.4.4.1.2
The actual lcd message text, including a carriage return after the first line, and a null character after the second line.
OBJECT-TYPE    
  LCDText  

ringswitchLCDUp 1.3.6.1.4.1.494.4.4.4.1.3
The lcd number of the lcd which would be displayed if the user clicked the paddle up.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchLCDDown 1.3.6.1.4.1.494.4.4.4.1.4
The lcd number of the lcd which would be displayed if the user clicked the paddle down.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchLAN 1.3.6.1.4.1.494.4.5
OBJECT IDENTIFIER    

elanRingnumFailed 1.3.6.1.4.1.494.4.5
This trap is sent when the ELAN ring number for an ATM LEC is already configured on another port.
TRAP-TYPE    
  ringswitchGenPortNum  

ringswitchLANTable 1.3.6.1.4.1.494.4.5.1
A table that contains virtual LAN information configured into the Ringswitch by the network administrator.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchLANEntry

ringswitchLANEntry 1.3.6.1.4.1.494.4.5.1.1
Name and status information associated with each virtual LAN entry.
OBJECT-TYPE    
  RingswitchLANEntry  

ringswitchLANIndex 1.3.6.1.4.1.494.4.5.1.1.1
The virtual LAN number for which this entry contains virtual LAN details.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchLANName 1.3.6.1.4.1.494.4.5.1.1.2
The name that the administrator has given this virtual LAN.
OBJECT-TYPE    
  DisplayString  

ringswitchLANPermeable 1.3.6.1.4.1.494.4.5.1.1.3
In an 'impermeable' group, broadcast frames which were received on a port in the group, but were not originated in the group, are discarded. In a 'permeable' group, such frames are transmitted on the other ports in the group.
OBJECT-TYPE    
  INTEGER impermeable(1), permeable(2)  

ringswitchLANStatus 1.3.6.1.4.1.494.4.5.1.1.4
The current status of this virtual LAN, a status of 'invalid' indicates that the virtual LAN's associated name and ring list are meaningless until the group is validated.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

ringswitchLANRingTable 1.3.6.1.4.1.494.4.5.2
A table that contains the rings associated with a virtual LAN that has been configured into the Ringswitch by the network administrator.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchLANRingEntry

ringswitchLANRingEntry 1.3.6.1.4.1.494.4.5.2.1
Name and status information associated with each virtual LAN ring table entry.
OBJECT-TYPE    
  RingswitchLANRingEntry  

ringswitchLANRingGroup 1.3.6.1.4.1.494.4.5.2.1.1
The virtual LAN index for which this entry contains virtual LAN ring details.
OBJECT-TYPE    
  INTEGER  

ringswitchLANRingIndex 1.3.6.1.4.1.494.4.5.2.1.2
The ring index for which this entry contains virtual LAN ring details.
OBJECT-TYPE    
  INTEGER  

ringswitchLANRingNum 1.3.6.1.4.1.494.4.5.2.1.3
The ring number contained in the virtual LAN.
OBJECT-TYPE    
  INTEGER  

ringswitchLANRingStatus 1.3.6.1.4.1.494.4.5.2.1.4
The current status of this virtual LAN ring entry, a status of 'invalid' indicates that the ring entry is not in use and the associated ring number is meaningless.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

ringswitchVirt 1.3.6.1.4.1.494.4.6
OBJECT IDENTIFIER    

routeDescriptorFailed 1.3.6.1.4.1.494.4.6
This trap is sent when an ATM LEC has failed to register a route descriptor.
TRAP-TYPE    
  ringswitchGenPortNum  
  ringswitchRouteDescrSegmentID  
  ringswitchRouteDescrBridgeNumber  

ringswitchVirtTB 1.3.6.1.4.1.494.4.6.1
OBJECT IDENTIFIER    

ringswitchVirtTBTable 1.3.6.1.4.1.494.4.6.1.1
A table that contains virtual LAN information configured into the Ringswitch by the network administrator.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchVirtTBEntry

ringswitchVirtTBEntry 1.3.6.1.4.1.494.4.6.1.1.1
Name and status information associated with each virtual LAN entry.
OBJECT-TYPE    
  RingswitchVirtTBEntry  

ringswitchVirtTBIndex 1.3.6.1.4.1.494.4.6.1.1.1.1
The virtual LAN number for which this entry contains virtual LAN details.
OBJECT-TYPE    
  INTEGER 1..31  

ringswitchVirtTBStatus 1.3.6.1.4.1.494.4.6.1.1.1.2
The current status of this virtual LAN, a status of 'invalid' indicates that the virtual LAN's associated name and ring list are meaningless until the group is validated; see RingswitchRowStatus comments above.
OBJECT-TYPE    
  RingswitchRowStatus  

ringswitchVirtTBName 1.3.6.1.4.1.494.4.6.1.1.1.3
The name that the administrator has given this virtual LAN.
OBJECT-TYPE    
  DisplayString  

ringswitchVirtTBType 1.3.6.1.4.1.494.4.6.1.1.1.4
The type of this virtual LAN.
OBJECT-TYPE    
  INTEGER port-only(1)  

ringswitchVirtTBNumArray 1.3.6.1.4.1.494.4.6.1.1.1.5
An octet string containing every port number in this virtual LAN, one per octet.
OBJECT-TYPE    
  OCTET STRING  

ringswitchVirtTBNumSize 1.3.6.1.4.1.494.4.6.1.1.1.6
The number of ports in this virtual LAN.
OBJECT-TYPE    
  INTEGER  

ringswitchSlot 1.3.6.1.4.1.494.4.7
OBJECT IDENTIFIER    

fanSpeedFailed 1.3.6.1.4.1.494.4.7
This trap is sent when a fan has failed.
TRAP-TYPE    
  ringswitchFanSpeed  

ringswitchSlotNumSlots 1.3.6.1.4.1.494.4.7.1
The number of slots available in this Ringswitch.
OBJECT-TYPE    
  INTEGER  

ringswitchSlotTable 1.3.6.1.4.1.494.4.7.2
A table that contains information about each slot in the Ringswitch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchSlotEntry

ringswitchSlotEntry 1.3.6.1.4.1.494.4.7.2.1
OBJECT-TYPE    
  RingswitchSlotEntry  

ringswitchSlotIndex 1.3.6.1.4.1.494.4.7.2.1.1
The value of this object identifies the slot for which this entry contains management information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchSlotStatus 1.3.6.1.4.1.494.4.7.2.1.2
The value of this variable indicates whether or not this slot supports the card that is currently placed in it: invalid - card not supported full-support - card fully supported no-port-open - cannot open ports on card no-port-fwd - cannot forward frames.
OBJECT-TYPE    
  INTEGER invalid(1), full-support(2), no-port-open(3), no-port-fwd(4)  

ringswitchSlotBasePort 1.3.6.1.4.1.494.4.7.2.1.3
The port number of the first port available in this slot.
OBJECT-TYPE    
  INTEGER  

ringswitchSlotCardType 1.3.6.1.4.1.494.4.7.2.1.4
The type of card in this slot.
OBJECT-TYPE    
  INTEGER tr-copper-4(1), tr-fiber-4(2), fddi-fiber(3), absent(4), unknown(5), tr-copper-8(6), atm-fiber(7), tr-fiber-8(8), group-switch(9), tr-copper-al-4(10), tr-copper-hstr-2(11), tr-copper-hstr-4(12), tr-fiber-hstr-2(13), tr-fiber-hstr-4(14), three-layer-switch(15), tr-copper-hstr-8(16), tr-fiber-hstr-8(17), ethernet(18), gigabit-ethernet(19)  

ringswitchSlotCardId 1.3.6.1.4.1.494.4.7.2.1.5
The hardware ID number for the card in this slot.
OBJECT-TYPE    
  INTEGER 0..255  

ringswitchSlotCardRevision 1.3.6.1.4.1.494.4.7.2.1.6
The hardware revision number for the card in this slot.
OBJECT-TYPE    
  INTEGER 0..255  

ringswitchSlotCardDescription 1.3.6.1.4.1.494.4.7.2.1.7
A string containing a textual description for the card.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

ringswitchSlotCardNumPorts 1.3.6.1.4.1.494.4.7.2.1.8
The actual number of ports provided by this card when fully configured in this slot.
OBJECT-TYPE    
  INTEGER  

ringswitchSlotCardLAN 1.3.6.1.4.1.494.4.7.2.1.9
The type of LAN supported by the card in this slot.
OBJECT-TYPE    
  INTEGER none(1), token-ring(2), fddi(3), atm(4), tls(5), ethernet(6), gigabit(7)  

ringswitchSlotCardLEDs 1.3.6.1.4.1.494.4.7.2.1.10
An octet string containing the colour of every LED on the card, one per octet: off (1), on-red (2), on-green (3), on-yellow (4), flash-red (5), flash-green (6), flash-yellow (7), flash-blue (8), flash-green-anti-phase (9), flash-yellow-anti-phase (10)
OBJECT-TYPE    
  OCTET STRING  

ringswitchSlotIfAdminStatus 1.3.6.1.4.1.494.4.7.2.1.11
An octet string containing the ifAdminStatus of every interface on the card, one per octet: up (1), down (2), testing (3)
OBJECT-TYPE    
  OCTET STRING  

ringswitchSlotAdapterStatus 1.3.6.1.4.1.494.4.7.2.1.12
An octet string containing the ringswitchGenPortAdapterStatus of every port on the card, one per octet: open (1), closed (2), opening (3)
OBJECT-TYPE    
  OCTET STRING  

ringswitchSlotTestError 1.3.6.1.4.1.494.4.7.2.1.13
An octet string containing the ringswitchFwdPortTestError of every port on the card, one per octet: no-error (1), same-ring (2), duplicate-ring (3), fail-nb (4), bad-rnum (5), fail-b (6)
OBJECT-TYPE    
  OCTET STRING  

ringswitchSlotPortHealth 1.3.6.1.4.1.494.4.7.2.1.14
An octet string containing the health of every port on the card, one per octet: normal (1), warning (2), degraded (3), critical (4)
OBJECT-TYPE    
  OCTET STRING  

ringswitchSlotLastStatus 1.3.6.1.4.1.494.4.7.2.1.15
An enumerated value that records the last important event that occurred during the card's operation. This is used in sending traps when such events occur.
OBJECT-TYPE    
  INTEGER atm-if-down(1), atm-porta-down(2), atm-portb-down(3), fddi-if-down(4), fddi-porta-iso(5), fddi-portb-iso(6)  

ringswitchSlotPortCreated 1.3.6.1.4.1.494.4.7.2.1.16
An octet string containing the ringswitchGenPortCreate of every possible port on the card, one per octet: active (1), inactive (2)
OBJECT-TYPE    
  OCTET STRING  

ringswitchSlotHealth 1.3.6.1.4.1.494.4.7.2.1.17
Current health of the card in the slot.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), degraded(3), critical(4)  

ringswitchSlotVersion 1.3.6.1.4.1.494.4.7.2.1.18
The version of code / hardware associated with the slot.
OBJECT-TYPE    
  INTEGER  

ringswitchGenPort 1.3.6.1.4.1.494.4.8
OBJECT IDENTIFIER    

psuFailed 1.3.6.1.4.1.494.4.8
This trap is sent when a PSU has broken.
TRAP-TYPE    
  ringswitchPSUStatus  

ringswitchGenPortTable 1.3.6.1.4.1.494.4.8.1
A table that contains information applicable to all ports.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchGenPortEntry

ringswitchGenPortEntry 1.3.6.1.4.1.494.4.8.1.1
OBJECT-TYPE    
  RingswitchGenPortEntry  

ringswitchGenPortNum 1.3.6.1.4.1.494.4.8.1.1.1
The port number of the port for which this entry contains Ringswitch management information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchGenPortAdapterStatus 1.3.6.1.4.1.494.4.8.1.1.2
The status of the adapter used by this port.
OBJECT-TYPE    
  INTEGER open(1), closed(2), opening(3), ready(4)  

ringswitchGenPortAddress 1.3.6.1.4.1.494.4.8.1.1.3
The hard wired address of the port.
OBJECT-TYPE    
  TRNMacAddress  

ringswitchGenPortLAA 1.3.6.1.4.1.494.4.8.1.1.4
The locally administered address of the port.
OBJECT-TYPE    
  TRNMacAddress  

ringswitchGenPortInOctets 1.3.6.1.4.1.494.4.8.1.1.5
48 bit version of the interface MIB counter ifInOctets.
OBJECT-TYPE    
  INTEGER48  

ringswitchGenPortOutOctets 1.3.6.1.4.1.494.4.8.1.1.6
48 bit version of the interface MIB counter ifOutOctets.
OBJECT-TYPE    
  INTEGER48  

ringswitchGenPortResetCounters 1.3.6.1.4.1.494.4.8.1.1.7
Use this variable to reset all the counters on this port, including those in the ringswitchGenPort, dot1dSRPort, ifEntry and fddimib groups.
OBJECT-TYPE    
  INTEGER reset(1)  

ringswitchGenPortRMONCapabilities 1.3.6.1.4.1.494.4.8.1.1.8
A value that indicates the RMON capabilities of the port. The value represents the highest level RMON mode which the port can support. 'disabled' is the lowest level and indicates no RMON capabilities 'snooping' is the highest level and indicates that the port is capable of running in all RMON modes.
OBJECT-TYPE    
  INTEGER disabled(1), economy(2), standard(3), snooping(4)  

ringswitchGenPortRMONMode 1.3.6.1.4.1.494.4.8.1.1.9
Controls the types of frames passed to the RMON probe function for processing as follows: disabled - no frames passed to the RMON probe economy - MAC frames required for token ring specific groups as follows: MLStats table Token Ring Ring station table standard - all frames snooping - all frames provided by the 'economy' mode plus any frames originating from or destined for the 'snoop address' controlled by ringswitchGenPortRMONSnoop
OBJECT-TYPE    
  INTEGER disabled(1), economy(2), standard(3), snooping(4)  

ringswitchGenPortRMONSnoop 1.3.6.1.4.1.494.4.8.1.1.10
This controls the RMON snoop address used when ringswitchGenPortRMONMode is set to 'snooping'. A value of all zeroes results in no snooping taking place.
OBJECT-TYPE    
  TRNMacAddress  

ringswitchGenPortIPXNet 1.3.6.1.4.1.494.4.8.1.1.11
The IPX network number of the port.
OBJECT-TYPE    
  INTEGER  

ringswitchGenPortLastStatus 1.3.6.1.4.1.494.4.8.1.1.12
An enumerated value that records the last important event that occurred during the port's operation. This is used in sending traps when such events occur.
OBJECT-TYPE    
  INTEGER fddi-remove(1), fddi-twisted(2), fddi-bypass(3)  

ringswitchGenPortCreate 1.3.6.1.4.1.494.4.8.1.1.13
This variable is used to dynamically create and destroy Ringswitch ports. When a port is active, all the mib table entries relevant to the type of port will be in existence. When a port is inactive no entry will exist for that port in the ringswitchGenPort table and no other port based mib table entries will exist for that port. To create a port the manager should issue a set request with a value of active which will result in an entry being created in the ringswitchGenPort table and all other port based tables relevant to the port. To destroy a port the manager should issue a set request with a value of inactive which will result in the deletion of the ringswitchGenPort table entry for the port and also the deletion of all other port based table entries associated with the port. Not all types of port can be created and destroyed dynamically.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

ringswitchGenPortHealth 1.3.6.1.4.1.494.4.8.1.1.14
Current health of this port.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), degraded(3), critical(4)  

ringswitchTR 1.3.6.1.4.1.494.4.9
OBJECT IDENTIFIER    

versionMismatch 1.3.6.1.4.1.494.4.9
This trap is sent when there is a version mismatch between some installed software components.
TRAP-TYPE    
  ringswitchVersionMismatch  

ringswitchTRIfTable 1.3.6.1.4.1.494.4.9.1
This table contains Token Ring interface parameters and state variables not available in dot5Table. There is one entry per 802.5 interface.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTRIfEntry

ringswitchTRIfEntry 1.3.6.1.4.1.494.4.9.1.1
A list of Token Ring status and parameter values for an 802.5 interface.
OBJECT-TYPE    
  RingswitchTRIfEntry  

ringswitchTRIfIndex 1.3.6.1.4.1.494.4.9.1.1.1
The value of this object identifies the 802.5 interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
OBJECT-TYPE    
  INTEGER  

ringswitchTRIfRingSpeed 1.3.6.1.4.1.494.4.9.1.1.2
Speed of the ring to which this interface is connected.
OBJECT-TYPE    
  INTEGER four(1), sixteen(2), hundred(3)  

ringswitchTRIfMode 1.3.6.1.4.1.494.4.9.1.1.3
OBJECT-TYPE    
  INTEGER node(1), concentrator(2), node-fdx(3), conc-fdx(4), node-classic(5), conc-classic(6), node-cau-rio(7)  

ringswitchTRIfRPSEnable 1.3.6.1.4.1.494.4.9.1.1.4
Enables or disables the Ring Parameter Server function on the interface. If this variable is set to enabled, the interface will enable the RPS functional address, and respond to Request Parameters MAC frames, supplying the interface's segment number and soft error report timer value in the response.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchTRIfRingStatus 1.3.6.1.4.1.494.4.9.1.1.5
The status of the ring to which this interface is connected. normal: Inserted into Classic ring single: Single Station beaconing: Beaconing Detected normal-fdx: DTR link in full duplex (TXI) mode dtr-wait: DTR Concentrator port waiting for attached station to insert
OBJECT-TYPE    
  INTEGER normal(1), single(2), beaconing(3), normal-fdx(4), dtr-wait(5)  

ringswitchTRIfSoftErrTimer 1.3.6.1.4.1.494.4.9.1.1.6
Sets the value of the Soft Error Timer Value used by the Ring Parameter Server function on this interface. When this function is enabled it will respond to Request Parameters MAC frames, supplying this value in the response as well as the segment number. Note that this value is in centiseconds.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchTRIfFrameStatusControl 1.3.6.1.4.1.494.4.9.1.1.7
Frame Status control is available on Aleutian based hardware. enabled (1); disabled(2).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchTRIfTokenPriorityControl 1.3.6.1.4.1.494.4.9.1.1.8
Frame Status control is available on Aleutian based hardware. enabled (1); disabled(2).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchTRIfFastFailoverEnable 1.3.6.1.4.1.494.4.9.1.1.9
Whether the port is a fast failover port. Only ports with odd port number on HSTR cards can be fast failover cards. On other ports this value is ignored. enabled (1); disabled(2).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchTRIfFastFailoverStandbyStatus 1.3.6.1.4.1.494.4.9.1.1.10
The status of the standby port in a fast failover pair. open (1); closed (2); opening (3); ready (4); open-fail(5).
OBJECT-TYPE    
  INTEGER open(1), closed(2), opening(3), ready(4), open-fail(5)  

ringswitchTRIfFastFailoverPrimaryPort 1.3.6.1.4.1.494.4.9.1.1.11
The primary port in a fast failover pair. unknown (0); left (1); right (2).
OBJECT-TYPE    
  INTEGER unknown(0), left(1), right(2)  

ringswitchTRIfFastFailoverTrapInfoReason 1.3.6.1.4.1.494.4.9.1.1.12
The reason why a fast failover trap was sent. primary-open-fail (1); standby-open-fail (2); links-swapped (3)
OBJECT-TYPE    
  INTEGER primary-open-fail(1), standby-open-fail(2), links-swapped(3)  

ringswitchTRGrpSwtchTable 1.3.6.1.4.1.494.4.9.2
This table contains information relating to group switch rings (each containing five individual ports).
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTRGrpSwtchEntry

ringswitchTRGrpSwtchEntry 1.3.6.1.4.1.494.4.9.2.1
A list containing Group Switch ring information.
OBJECT-TYPE    
  RingswitchTRGrpSwtchEntry  

ringswitchTRGrpSwtchIfIndex 1.3.6.1.4.1.494.4.9.2.1.1
The value of this object identifies the 802.5 interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
OBJECT-TYPE    
  INTEGER  

ringswitchTRGrpSwtchRemoveThreshold 1.3.6.1.4.1.494.4.9.2.1.2
The removal threshold, this controls how many times a faulty but persistent node is allowed to attempt to insert into the ring before its port is permanently disabled.
OBJECT-TYPE    
  INTEGER 1..255  

ringswitchTRGrpSwtchRingPollAction 1.3.6.1.4.1.494.4.9.2.1.3
Defines what happens when the group switch detects a ring poll failure.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

ringswitchTRGrpSwtchBeaconThreshold 1.3.6.1.4.1.494.4.9.2.1.4
Number of successive beacon frames from one node before a problem is noticed.
OBJECT-TYPE    
  INTEGER 1..255  

ringswitchTRGrpSwtchBeaconAction 1.3.6.1.4.1.494.4.9.2.1.5
Defines what happens when the group switch detects a succession of beacon frames from the same node.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

ringswitchTRGrpSwtchPurgeThreshold 1.3.6.1.4.1.494.4.9.2.1.6
Number of successive ring purge frames from one node before a problem is noticed.
OBJECT-TYPE    
  INTEGER 1..255  

ringswitchTRGrpSwtchPurgeAction 1.3.6.1.4.1.494.4.9.2.1.7
Defines what happens when the group switch detects a succession of ring purge frames from the same node.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

ringswitchTRGrpSwtchIsoErrThreshold 1.3.6.1.4.1.494.4.9.2.1.8
Number of isolating errors before a problem is noticed.
OBJECT-TYPE    
  INTEGER 1..255  

ringswitchTRGrpSwtchIsoErrAction 1.3.6.1.4.1.494.4.9.2.1.9
Defines what happens when the group switch detects too many isolating errors.
OBJECT-TYPE    
  INTEGER ignore(1), inform(2), remove(3)  

ringswitchTRGrpSwtchRingPollThreshold 1.3.6.1.4.1.494.4.9.2.1.10
Number of successive ring poll failures caused by one node before a problem is noticed.
OBJECT-TYPE    
  INTEGER 1..255  

ringswitchTRGrpSwtchPortTable 1.3.6.1.4.1.494.4.9.3
This table contains information relating to individual Group Switch ports.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTRGrpSwtchPortEntry

ringswitchTRGrpSwtchPortEntry 1.3.6.1.4.1.494.4.9.3.1
A list containing Group Switch port information.
OBJECT-TYPE    
  RingswitchTRGrpSwtchPortEntry  

ringswitchTRGrpSwtchPortIfIndex 1.3.6.1.4.1.494.4.9.3.1.1
The value of this object identifies the 802.5 interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
OBJECT-TYPE    
  INTEGER  

ringswitchTRGrpSwtchPortIndex 1.3.6.1.4.1.494.4.9.3.1.2
Individual Group Switch port number
OBJECT-TYPE    
  INTEGER 1..5  

ringswitchTRGrpSwtchPortAddress 1.3.6.1.4.1.494.4.9.3.1.3
Node address of device last inserted in the Group Switch port.
OBJECT-TYPE    
  TRNMacAddress  

ringswitchTRGrpSwtchTrapInfo 1.3.6.1.4.1.494.4.9.4
OBJECT IDENTIFIER    

ringswitchTRGrpSwtchTrapInfoReason 1.3.6.1.4.1.494.4.9.4.1
Crime committed.
OBJECT-TYPE    
  INTEGER reason-unknown(1), ring-poll-failure(2), beaconing(3), ring-purges(4), isolating-errors(5), removal-exceeded(6), beaconing-fault(7)  

ringswitchTRGrpSwtchSlotTable 1.3.6.1.4.1.494.4.9.5
This table contains information relating to Group Switch cards.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTRGrpSwtchSlotEntry

ringswitchTRGrpSwtchSlotEntry 1.3.6.1.4.1.494.4.9.5.1
A list containing Group Switch card information.
OBJECT-TYPE    
  RingswitchTRGrpSwtchSlotEntry  

ringswitchTRGrpSwtchSlotIndex 1.3.6.1.4.1.494.4.9.5.1.1
Group Switch slot number
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchTRGrpSwtchSlotAdminStatii 1.3.6.1.4.1.494.4.9.5.1.2
An octet string containing the rptrPortAdminStatus of every Group Switch port on the card, one per octet: enabled(1), disabled(2)
OBJECT-TYPE    
  OCTET STRING  

ringswitchTRGrpSwtchSlotAutoPartitions 1.3.6.1.4.1.494.4.9.5.1.3
An octet string with the rptrPortAutoPartitionState of every Group Switch port on the card, one per octet: notAutoPartitioned(1), autoPartitioned(2)
OBJECT-TYPE    
  OCTET STRING  

ringswitchTRGrpSwtchSlotOperStatii 1.3.6.1.4.1.494.4.9.5.1.4
An octet string containing the rptrPortOperStatus of every Group Switch port on the card, one per octet: operational(1), notOperational(2), notPresent(3)
OBJECT-TYPE    
  OCTET STRING  

ringswitchFDDI 1.3.6.1.4.1.494.4.10
OBJECT IDENTIFIER    

genPortStatus 1.3.6.1.4.1.494.4.10
This trap is sent when an interesting status change occurs on a port.
TRAP-TYPE    
  ringswitchGenPortLastStatus  

ringswitchFDDICardTable 1.3.6.1.4.1.494.4.10.1
A table that contains information about each FDDI card in the Ringswitch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchFDDICardEntry

ringswitchFDDICardEntry 1.3.6.1.4.1.494.4.10.1.1
A list of FDDI status and parameter values for a FDDI card.
OBJECT-TYPE    
  RingswitchFDDICardEntry  

ringswitchFDDICardNum 1.3.6.1.4.1.494.4.10.1.1.1
The slot number of the card for which this entry contains Ringswitch management information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchFDDICardSMTIndex 1.3.6.1.4.1.494.4.10.1.1.2
This variable takes the same value as the fddimibSMTIndex variable associated with this FDDI card.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchFDDICardFixupMode 1.3.6.1.4.1.494.4.10.1.1.3
This MIB variable controls operation of protocol fixups on the FDDI linecard. When set to fddi-all, embedded MAC addresses in frames are bit-reversed to convert the frames into native FDDI format
OBJECT-TYPE    
  INTEGER disabled(1), fddi-all(2)  

ringswitchFDDICardVRStatus 1.3.6.1.4.1.494.4.10.1.1.4
This variable is used to enable / disable the FDDI virtual ring.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchFDDICardVRRingNum 1.3.6.1.4.1.494.4.10.1.1.5
The ring number of the virtual ring.
OBJECT-TYPE    
  INTEGER  

ringswitchFDDICardVRBridgeNum 1.3.6.1.4.1.494.4.10.1.1.6
The bridge number of the virtual ring.
OBJECT-TYPE    
  INTEGER  

ringswitchFDDICardStatus 1.3.6.1.4.1.494.4.10.1.1.7
This variable gives the status of the SMT. Each bit (when set) carries the following information: bit 0 (lsb) : ring-inop, bit 1 : mac-unavailable, bit 2 : twisted, bit 3 : i-am-duplicate, bit 4 : he-is-duplicate, bit 5 : bypass-stuck, bit 6 : trace, bit 7 : long-ring-inop Multiple status values can occur simultaneously. If the port is not open then all bits are set to 0.
OBJECT-TYPE    
  INTEGER  

ringswitchATM 1.3.6.1.4.1.494.4.11
OBJECT IDENTIFIER    

slotStatus 1.3.6.1.4.1.494.4.11
This trap is sent when an interesting status change occurs on a slot.
TRAP-TYPE    
  ringswitchSlotLastStatus  

ringswitchATMCardTable 1.3.6.1.4.1.494.4.11.1
A table that contains information about each ATM card in the Ringswitch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchATMCardEntry

ringswitchATMCardEntry 1.3.6.1.4.1.494.4.11.1.1
A list that contains information about each ATM card in the Ringswitch.
OBJECT-TYPE    
  RingswitchATMCardEntry  

ringswitchATMCardNum 1.3.6.1.4.1.494.4.11.1.1.1
The slot number of the card for which this entry contains Ringswitch management information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchATMCardAdminStatus 1.3.6.1.4.1.494.4.11.1.1.2
This variable is a duplicate of the ifAdminStatus of the SONET interface associated with this ATM card. It is used to enable / disable the ATM card.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

ringswitchATMCardRemoteUNIVer 1.3.6.1.4.1.494.4.11.1.1.3
The type of signalling supported by the ATM switch at the remote end of this interface.
OBJECT-TYPE    
  INTEGER unknown(1), uni-30(2), uni-31(3), uni-40(4)  

ringswitchATMCardLECSAddress 1.3.6.1.4.1.494.4.11.1.1.4
The LECS address that a LEC associated with this card will use. If the configured address fails or is set to 0 then the LEC must find the location of the LECS by either: using a defined ILMI procedure to determine the LECS address; using the well-known LECS address; or using the well-known PVC to the LECS. The LEC will try each of these three methods in turn (if configured to use them) until the LECS is located.
OBJECT-TYPE    
  NSAP  

ringswitchATMCardLECSIlmi 1.3.6.1.4.1.494.4.11.1.1.5
This variable indicates whether or not a LEC can try to determine the LECS address using ILMI.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchATMCardLECSWka 1.3.6.1.4.1.494.4.11.1.1.6
This variable indicates whether or not a LEC can use the well-known LECS address to locate the LECS.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchATMCardLECSPvc 1.3.6.1.4.1.494.4.11.1.1.7
This variable indicates whether or not a LEC can use the well-known PVC to locate the LECS.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchATMCardActivePort 1.3.6.1.4.1.494.4.11.1.1.8
The port that the ATM card is currently using.
OBJECT-TYPE    
  INTEGER port-a(1), port-b(2)  

ringswitchATMCardILMIStatus 1.3.6.1.4.1.494.4.11.1.1.9
The current state of the ILMI signalling for this card.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

ringswitchATMCardSignalStatus 1.3.6.1.4.1.494.4.11.1.1.10
The current state of the ATM signalling for this card.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

ringswitchATMCardHardWiredESI 1.3.6.1.4.1.494.4.11.1.1.11
The Hard wired ESI (End Station Identifier) for the card.
OBJECT-TYPE    
  ETHMacAddress  

ringswitchATMCardLocalESI 1.3.6.1.4.1.494.4.11.1.1.12
The locally administered ESI (End Station Identifier) for the card. When a set request for this variable is accepted the new value will not take effect until the next time the ATM card is rebooted.
OBJECT-TYPE    
  ETHMacAddress  

ringswitchATMCardPortB 1.3.6.1.4.1.494.4.11.1.1.13
The state of Port B - whether or not an attempt will be made to use Port B in the event of Port A failing.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchATMCardMode 1.3.6.1.4.1.494.4.11.1.1.14
The framing mode used by the front-end.
OBJECT-TYPE    
  INTEGER sonet(1), sdh(2)  

ringswitchATMCardSONETIfIndex 1.3.6.1.4.1.494.4.11.1.1.15
Each ATM card provides one SONET interface. This variable takes the same value as the ifIndex associated with this SONET interface.
OBJECT-TYPE    
  INTEGER  

ringswitchATMCardATMIfIndex 1.3.6.1.4.1.494.4.11.1.1.16
Each ATM card provides one ATM interface. This variable takes the same value as the ifIndex associated with this ATM interface.
OBJECT-TYPE    
  INTEGER  

ringswitchATMCardAAL5IfIndex 1.3.6.1.4.1.494.4.11.1.1.17
Each ATM card provides one AAL5 interface. This variable takes the same value as the ifIndex associated with this AAL5 interface.
OBJECT-TYPE    
  INTEGER  

ringswitchATMCardRowStatuses 1.3.6.1.4.1.494.4.11.1.1.18
An octet string containing the lecRowStatus for each LEC on this ATM card.
OBJECT-TYPE    
  OCTET STRING  

ringswitchATMCardMediaType 1.3.6.1.4.1.494.4.11.1.1.19
The media type of this ATM card.
OBJECT-TYPE    
  INTEGER multi-mode-fiber(1), single-mode-fiber(2)  

ringswitchATMCardConfigUNIVer 1.3.6.1.4.1.494.4.11.1.1.20
The type of signalling that is configured for the interface.
OBJECT-TYPE    
  INTEGER autoConfig(1), uni-30(2), uni-31(3), uni-40(4)  

ringswitchATMCardActualUNIVer 1.3.6.1.4.1.494.4.11.1.1.21
The type of signalling that is currently being used on the interface. This may reflect a manually configured value for the signalling type, or may be determined by other means such as auto- configuration.
OBJECT-TYPE    
  INTEGER unknown(1), uni-30(2), uni-31(3), uni-40(4)  

ringswitchATMCardEthLecSupport 1.3.6.1.4.1.494.4.11.1.1.22
Does this ATM card support Ethernet LEC.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ringswitchATMPortTable 1.3.6.1.4.1.494.4.11.2
A table that contains information about each LEC in the Ringswitch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchATMPortEntry

ringswitchATMPortEntry 1.3.6.1.4.1.494.4.11.2.1
A list that contains information about each LEC in the Ringswitch.
OBJECT-TYPE    
  RingswitchATMPortEntry  

ringswitchATMPortNum 1.3.6.1.4.1.494.4.11.2.1.1
The port number of the port for which this entry contains LEC information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchATMPortFailReason 1.3.6.1.4.1.494.4.11.2.1.2
The reason why this LEC failed to open.
OBJECT-TYPE    
  INTEGER success(1), sig-ilmi-fail(2), lecs-not-found(3), config-failed(4), les-connect-fail(5), join-failed(6), bus-not-found(7), bus-connect-fail(8), bus-didnt-connect(9), duplicate-elan(10), les-vc-dropped(11), bus-vc-dropped(12), rejoin-wrong-elan(13), insufficient-memory(14), already-open(15), invalid-port(16), unknown(17)  

ringswitchATMPortFailSecondary 1.3.6.1.4.1.494.4.11.2.1.3
More information on why this LEC failed to open. Only valid if ringswitchATMFailReason is either config-failed(4) or join-failed(6).
OBJECT-TYPE    
  INTEGER none(1), timeout(2), undefined-error(3), version-not-supported(4), invalid-request-params(5), dup-lan-destination(6), dup-atm-address(7), insuff-resources(8), access-denied(9), invalid-requester-id(10), invalid-lan-destination(11), invalid-atm-address(12), no-configuration(13), le-configure-error(14), insuff-information(15)  

ringswitchATMPortRxDiscards 1.3.6.1.4.1.494.4.11.2.1.4
OBJECT-TYPE    
  INTEGER  

ringswitchATMPortTxDiscards 1.3.6.1.4.1.494.4.11.2.1.5
OBJECT-TYPE    
  INTEGER  

ringswitchATMPortTxQuotaDiscards 1.3.6.1.4.1.494.4.11.2.1.6
OBJECT-TYPE    
  INTEGER  

ringswitchATMPortTxBUSBroadcasts 1.3.6.1.4.1.494.4.11.2.1.7
OBJECT-TYPE    
  INTEGER  

ringswitchATMPortTxBUSUnknowns 1.3.6.1.4.1.494.4.11.2.1.8
OBJECT-TYPE    
  INTEGER  

ringswitchATMPortRxBUSFiltered 1.3.6.1.4.1.494.4.11.2.1.9
OBJECT-TYPE    
  INTEGER  

ringswitchATMPortIPXTypeETH 1.3.6.1.4.1.494.4.11.2.1.10
This variable specifies the encapsulation type on Ethernet for all IPX frames forwarded from onto an Ethernet LEC
OBJECT-TYPE    
  INTEGER auto(1), ieee8022(2), snap(3), ieee8023(4), dix(5)  

ringswitchATMPortIPXTypeTRN 1.3.6.1.4.1.494.4.11.2.1.11
This variable specifies the encapsulation type on TRN for all IPX frames forwarded from an Ethernet LEC
OBJECT-TYPE    
  INTEGER auto(1), ieee8022(2), snap(3)  

ringswitchATMPortIPXEvenize 1.3.6.1.4.1.494.4.11.2.1.12
If this variable is set to enable then all IPX packets forwarded in either direction to be even length by adding a zero padding byte if required
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchATMPortIPXBufLimit 1.3.6.1.4.1.494.4.11.2.1.13
If this variable is enabled then any NCP buffer size negotiation requests are intercepted and the requested frame size is limit to something less than the ELAN's maximum size
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchATMPortIPXEnable 1.3.6.1.4.1.494.4.11.2.1.14
If this variable is enabled on an Ethernet LEC port then the LEC will do translational bridging of IPX frames, otherwise it will discard them. It is ignored for Token Ring LECs
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchATMPortIPEnable 1.3.6.1.4.1.494.4.11.2.1.15
If this variable is enabled on an Ethernet LEC port then the LEC will do translational bridging of IP, ARP and RARP frames, otherwise it will discard them. It is ignored for Token Ring LECs
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchATMPortIPMulticastType 1.3.6.1.4.1.494.4.11.2.1.16
This variable specifies the type of MAC address to use as the destination for IP multicast frames on Token Ring. It is ignored for Token Ring LECs
OBJECT-TYPE    
  INTEGER broadcast(1), functional(2), group(3)  

ringswitchPSU 1.3.6.1.4.1.494.4.12
OBJECT IDENTIFIER    

oneNodePerPortViolation 1.3.6.1.4.1.494.4.12
Sent when two or more nodes are inserted in a Group Switch port.
TRAP-TYPE    
  ringswitchTRGrpSwtchIfIndex  

ringswitchPSUNumUnits 1.3.6.1.4.1.494.4.12.1
The number of power supply units in this Ring- switch.
OBJECT-TYPE    
  INTEGER  

ringswitchPSUTable 1.3.6.1.4.1.494.4.12.2
A table that contains information about each power supply unit in this Ringswitch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchPSUEntry

ringswitchPSUEntry 1.3.6.1.4.1.494.4.12.2.1
OBJECT-TYPE    
  RingswitchPSUEntry  

ringswitchPSUIndex 1.3.6.1.4.1.494.4.12.2.1.1
The value of this object identifies the PSU for which this entry contains management information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchPSUDescription 1.3.6.1.4.1.494.4.12.2.1.2
A string containing a textual description for this power supply unit
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

ringswitchPSUStatus 1.3.6.1.4.1.494.4.12.2.1.3
This variable gives the status of PSU1.
OBJECT-TYPE    
  INTEGER unit-absent(1), unit-broken(2), unit-normal(3)  

ringswitchFan 1.3.6.1.4.1.494.4.13
OBJECT IDENTIFIER    

grpSwitchPortDisabled 1.3.6.1.4.1.494.4.13
Sent when a group switch port is disabled.
TRAP-TYPE    
  ringswitchTRGrpSwtchIfIndex  
  ringswitchTRGrpSwtchPortIndex  
  ringswitchTRGrpSwtchTrapInfoReason  

ringswitchFanNumUnits 1.3.6.1.4.1.494.4.13.1
The number of fans in this Ringswitch.
OBJECT-TYPE    
  INTEGER  

ringswitchFanTable 1.3.6.1.4.1.494.4.13.2
A table that contains information about each fan in this Ringswitch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchFanEntry

ringswitchFanEntry 1.3.6.1.4.1.494.4.13.2.1
OBJECT-TYPE    
  RingswitchFanEntry  

ringswitchFanIndex 1.3.6.1.4.1.494.4.13.2.1.1
The value of this object identifies the Fan for which this entry contains management information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchFanDescription 1.3.6.1.4.1.494.4.13.2.1.2
A string containing a textual description for this Fan.
OBJECT-TYPE    
  DisplayString SIZE(0..64)  

ringswitchFanSpeed 1.3.6.1.4.1.494.4.13.2.1.3
The number of revolutions per minute being reported by this fan. If this value is read as zero, then the fan is no longer operating.
OBJECT-TYPE    
  INTEGER 0..65535  

ringswitchTrap 1.3.6.1.4.1.494.4.14
OBJECT IDENTIFIER    

grpSwitchPortKilled 1.3.6.1.4.1.494.4.14
Sent when a group switch port is disabled by fault manager
TRAP-TYPE    
  ringswitchTRGrpSwtchIfIndex  
  ringswitchTRGrpSwtchPortIndex  
  ringswitchTRGrpSwtchTrapInfoReason  

ringswitchRouteDescrSegmentID 1.3.6.1.4.1.494.4.14.1
The LAN ID portion of the IEEE 802.5 route descriptor that failed to register.
OBJECT-TYPE    
  INTEGER 0..4095  

ringswitchRouteDescrBridgeNumber 1.3.6.1.4.1.494.4.14.2
The Bridge Number portion of the IEEE 802.5 route descriptor that failed to register.
OBJECT-TYPE    
  INTEGER 0..15  

ringswitchVersionMismatch 1.3.6.1.4.1.494.4.14.3
An enumerated value that describes which software components have a version mismatch.
OBJECT-TYPE    
  INTEGER boot-eprom-and-boot-flash(1)  

ringswitchDownloadFailed 1.3.6.1.4.1.494.4.14.4
An enumerated value that describes which software component has had a failed download that may compromise system operation at the next reboot.
OBJECT-TYPE    
  INTEGER microcode(1), boot-code(2), fddi-code(3), atm-code(4)  

ringswitchFilter 1.3.6.1.4.1.494.4.15
OBJECT IDENTIFIER    

downloadFailed 1.3.6.1.4.1.494.4.15
This trap is sent when a download operation has failed, and system operation may be compromised as the next reboot.
TRAP-TYPE    
  ringswitchDownloadFailed  

ringswitchFilterTable 1.3.6.1.4.1.494.4.15.1
This table contains Ringswitch protocol filter information. There is one entry per filter.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchFilterEntry

ringswitchFilterEntry 1.3.6.1.4.1.494.4.15.1.1
A list of Ringswitch protocol filters.
OBJECT-TYPE    
  RingswitchFilterEntry  

ringswitchFilterIndex 1.3.6.1.4.1.494.4.15.1.1.1
The index of this filter.
OBJECT-TYPE    
  INTEGER  

ringswitchFilterStatus 1.3.6.1.4.1.494.4.15.1.1.2
The filter status; see RingswitchRowStatus comments above for more details.
OBJECT-TYPE    
  RingswitchRowStatus  

ringswitchFilterName 1.3.6.1.4.1.494.4.15.1.1.3
The filter name.
OBJECT-TYPE    
  DisplayString  

ringswitchFilterData 1.3.6.1.4.1.494.4.15.1.1.4
An octet string containing the filter definition. It consists of one or more sections in the format ... where the first byte is the length of this section in bytes (including the length and offset), and the second byte is the offset from the end of the routing information field. The subsequent data bytes are compared with the data at the offset into broadcast frames received on each port on the Ringswitch.
OBJECT-TYPE    
  OCTET STRING SIZE(0..64)  

ringswitchFilterExceptionType 1.3.6.1.4.1.494.4.15.1.1.5
What this filter does when matching a frame: a value of 'normal' sends the frame to the ports on the row of the matrix corresponding to the input port; a value of 'exception' stops it going to those ports.
OBJECT-TYPE    
  INTEGER normal(1), exception(2)  

ringswitchFilterType 1.3.6.1.4.1.494.4.15.1.1.6
The filter type; for future expansion.
OBJECT-TYPE    
  INTEGER normal(1), match-all(2)  

ringswitchFilterForwardType 1.3.6.1.4.1.494.4.15.1.1.7
The type of forwarding affected by the filter.
OBJECT-TYPE    
  INTEGER sr-only(1), tb-only(2), sr-tb(3)  

ringswitchFilterMatrixTable 1.3.6.1.4.1.494.4.15.2
This table contains Ringswitch protocol filter switching matrix information. There is one entry for each row of each switching matrix.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchFilterMatrixEntry

ringswitchFilterMatrixEntry 1.3.6.1.4.1.494.4.15.2.1
A list of Ringswitch protocol filter switching matrix rows.
OBJECT-TYPE    
  RingswitchFilterMatrixEntry  

ringswitchFilterMatrixIndex 1.3.6.1.4.1.494.4.15.2.1.1
The index of this filter.
OBJECT-TYPE    
  INTEGER  

ringswitchFilterMatrixRowIndex 1.3.6.1.4.1.494.4.15.2.1.2
The index of this row in this matrix.
OBJECT-TYPE    
  INTEGER  

ringswitchFilterMatrixData 1.3.6.1.4.1.494.4.15.2.1.3
A single row of the matrix, with ports 1 to 8 represented by the first octet (starting with the least significant bit), ports 9 to 16 by the next octet, and so on.
OBJECT-TYPE    
  OCTET STRING  

ringswitchTLS 1.3.6.1.4.1.494.4.16
OBJECT IDENTIFIER    

grpSwitchPortFaultDetected 1.3.6.1.4.1.494.4.16
Sent when a group switch port causes a fault.
TRAP-TYPE    
  ringswitchTRGrpSwtchIfIndex  
  ringswitchTRGrpSwtchPortIndex  
  ringswitchTRGrpSwtchTrapInfoReason  

ringswitchTLSCardTable 1.3.6.1.4.1.494.4.16.1
A table that contains information about each TLS card in the Ringswitch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSCardEntry

ringswitchTLSCardEntry 1.3.6.1.4.1.494.4.16.1.1
A list that contains information about each TLS card in the Ringswitch.
OBJECT-TYPE    
  RingswitchTLSCardEntry  

ringswitchTLSCardNum 1.3.6.1.4.1.494.4.16.1.1.1
The slot number of the card for which this entry contains Ringswitch management information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchTLSCardRowStatuses 1.3.6.1.4.1.494.4.16.1.1.2
An octet string containing the legRowStatus for each LEG on this TLS card.
OBJECT-TYPE    
  OCTET STRING  

ringswitchTLSCardRIPTTL 1.3.6.1.4.1.494.4.16.1.1.3
An integer giving the value to use for the TTL (Time to Live) field in RIP frames.
OBJECT-TYPE    
  INTEGER 1..255  

ringswitchTLSCardRIPInterval 1.3.6.1.4.1.494.4.16.1.1.4
An integer giving the interval in seconds between RIP anouncements.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchTLSCardRIPAging 1.3.6.1.4.1.494.4.16.1.1.5
Time in seconds to age out routes learnt through RIP.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchTLSCardDefRoute 1.3.6.1.4.1.494.4.16.1.1.6
The IP address of a gateway to use as the default route.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSCardDefRouteMetric 1.3.6.1.4.1.494.4.16.1.1.7
The metric to use for the default route.
OBJECT-TYPE    
  INTEGER 0..16  

ringswitchTLSCardRIPFlags 1.3.6.1.4.1.494.4.16.1.1.8
RIP flags for the TLS card. Bit 0 is set to indicate Ignore the Neighbours List. Bit 1 is set to indicate that routes learnt through OSPF should be redistributed through RIP.
OBJECT-TYPE    
  INTEGER 0..65535  

ringswitchTLSCardOSPFRouterId 1.3.6.1.4.1.494.4.16.1.1.9
The OSPF router Identifier.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSCardOSPFFlags 1.3.6.1.4.1.494.4.16.1.1.10
OSPF flags for the TLS card. Bit 0 must be set in an autonomous system border router and cleared otherwise. Bit 1 is not currently used. Bit 2 indicates that RIP routes should be exported to OSPF. Bit 3 indicates that static routes should be exported to OSPF. Bit 15 is the master OSPF enable for the card.
OBJECT-TYPE    
  INTEGER 0..65535  

ringswitchTLSCardStatsCpuUsage 1.3.6.1.4.1.494.4.16.1.1.11
The estimated CPU usage on the TLS card in a second measured in hundredths of a percent.
OBJECT-TYPE    
  INTEGER 0..10000  

ringswitchTLSCardStatsFreeMem 1.3.6.1.4.1.494.4.16.1.1.12
The amount of free memory in the heap on the TLS card measured in kilobytes.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSCardStatsFramesFwd 1.3.6.1.4.1.494.4.16.1.1.13
The number of frames forwarded per second by the fast forwarding engine on the TLS card.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSCardStatsMaxCpuUsage 1.3.6.1.4.1.494.4.16.1.1.14
The maximum value recorded for the CPU usage parameter.
OBJECT-TYPE    
  INTEGER 0..10000  

ringswitchTLSCardStatsMinFreeMem 1.3.6.1.4.1.494.4.16.1.1.15
The minimum value recorded for the CPU usage parameter.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSCardStatsMaxFramesFwd 1.3.6.1.4.1.494.4.16.1.1.16
The maximum value recorded for the forwarding parameter.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSCardStatsResetState 1.3.6.1.4.1.494.4.16.1.1.17
Write any value to this to reset the three maximum and minimum values above. Always reads as 1.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSCardARPFlush 1.3.6.1.4.1.494.4.16.1.1.18
Write any value to this to flush the TLS's ARP cache.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSCardBootPRASecondsThreshold 1.3.6.1.4.1.494.4.16.1.1.19
Length of time, in seconds, since the moment a BootP/DHCP client was booted after which the a clients BootP/DHCP requests will no longer be forwarded. Default value is 86,400.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSCardBootPRAHopsThreshold 1.3.6.1.4.1.494.4.16.1.1.20
A maximum value for the hops field in received BootP/DHCP requests. Default value is 4.
OBJECT-TYPE    
  INTEGER 1..16  

ringswitchTLSPortTable 1.3.6.1.4.1.494.4.16.2
A table that contains information about each LEG in the Ringswitch.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSPortEntry

ringswitchTLSPortEntry 1.3.6.1.4.1.494.4.16.2.1
A list that contains information about each LEG in the Ringswitch.
OBJECT-TYPE    
  RingswitchTLSPortEntry  

ringswitchTLSPortNum 1.3.6.1.4.1.494.4.16.2.1.1
The port number of the port for which this entry contains LEG information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchTLSPortName 1.3.6.1.4.1.494.4.16.2.1.2
The name that the administrator has given this subnet.
OBJECT-TYPE    
  DisplayString  

ringswitchTLSPortMTU 1.3.6.1.4.1.494.4.16.2.1.3
The maximum frame size allowed on this subnet. The value must not exceed the maximum frame size of the switch.
OBJECT-TYPE    
  INTEGER 64..18432  

ringswitchTLSPortEnable 1.3.6.1.4.1.494.4.16.2.1.4
Enable a port to use it. Disable a port to configure it. A newly created port will be disabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchTLSPortIpAddress 1.3.6.1.4.1.494.4.16.2.1.5
IP Address of the port. Used in conjunction with the IP subnet mask to define the subnet for the port.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSPortIpSubnetMask 1.3.6.1.4.1.494.4.16.2.1.6
IP subnet mask for the port. Used in conjunction with the port IP address to define the subnet for the port.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSPortRIPRxType 1.3.6.1.4.1.494.4.16.2.1.7
This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
OBJECT-TYPE    
  INTEGER rip1(1), rip2(2), rip1OrRip2(3), doNotReceive(4)  

ringswitchTLSPortRIPTxType 1.3.6.1.4.1.494.4.16.2.1.8
What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates.
OBJECT-TYPE    
  INTEGER doNotSend(1), ripVersion1(2), rip1Compatible(3), ripVersion2(4)  

ringswitchTLSPortRIPFlags 1.3.6.1.4.1.494.4.16.2.1.9
A bit mask of flags to control RIP operation. By default, all defined bits are set to 1. Bit 0 (LSB) says announce default routes, bit 1 says announce host routes, bit 2 says announce static routes, bit 4 says learn default routes, bit 5 says learn host routes, bit 8 enables route hold-down, bit 9 enables split horizon, bit 10 enables poison reverse, and bit 11 enable route summarising.
OBJECT-TYPE    
  INTEGER 0..65535  

ringswitchTLSPortIfArray 1.3.6.1.4.1.494.4.16.2.1.10
An octet string containing every interface port number in this subnet, one port (1-64) per octet.
OBJECT-TYPE    
  OCTET STRING  

ringswitchTLSPortRIP2AuthType 1.3.6.1.4.1.494.4.16.2.1.11
The RIP-v2 authentification type. Valid values are noAuthentication, simplePassword or md5.
OBJECT-TYPE    
  INTEGER noAuthentication(1), simplePassword(2), md5(3)  

ringswitchTLSPortRIP2AuthKey 1.3.6.1.4.1.494.4.16.2.1.12
The value to be used as the Authentication Key whenever the corresponding instance of ringswitchTLSPortRIP2AuthTypee has a value other than noAuthentication. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero.
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

ringswitchTLSPortOSPFEnable 1.3.6.1.4.1.494.4.16.2.1.13
Enable a port to use OSPF.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchTLSPortOSPFAreaId 1.3.6.1.4.1.494.4.16.2.1.14
OSPF area identifier for the port.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSPortLegFlags 1.3.6.1.4.1.494.4.16.2.1.15
Bits 1 and 0 Configure how to send IP multicast frames over Token Ring. 00 means use broadcast. 01 means use the functional address C000-0004-0000. 02 means use the Group address as on Ethernet.
OBJECT-TYPE    
  INTEGER 0..65535  

ringswitchTLSPortOSPFAuthType 1.3.6.1.4.1.494.4.16.2.1.16
The OSPF authentification type. Valid values are noAuthentication, simplePassword or md5.
OBJECT-TYPE    
  INTEGER noAuthentication(1), simplePassword(2), md5(3)  

ringswitchTLSPortOSPFAuthMD5KeyId 1.3.6.1.4.1.494.4.16.2.1.17
The OSPF MD5 key id. This is a byte value of the MD5 key id. It is ignored if ringswitchTLSPortOSPFAuthType is not md5.
OBJECT-TYPE    
  INTEGER 0..255  

ringswitchTLSPortOSPFAuthKey 1.3.6.1.4.1.494.4.16.2.1.18
The value to be used as the Authentication Key whenever the corresponding instance of ringswitchTLSPortOSPFAuthType has a value other than noAuthentication. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Simple passwords use 8 characters. MD5 passwords use 16 characters. Reading this object always results in an OCTET STRING of length zero.
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

ringswitchTLSPortOSPFCost 1.3.6.1.4.1.494.4.16.2.1.19
The OSPF cost of sending a packet from this interface. Default value is 1. A value of 0 is not allowed.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchTLSPortOSPFPriority 1.3.6.1.4.1.494.4.16.2.1.20
The priority of this interface when deciding which interface on the attached network should become the designated router. A value of 0 will prevent the interface from ever becoming the designated router. Default value is 1.
OBJECT-TYPE    
  INTEGER 0..65535  

ringswitchTLSPortOSPFHelloInterval 1.3.6.1.4.1.494.4.16.2.1.21
The length of time in seconds between sending OSPF hello packets from this interface. Default value is 10. A value of 0 is not allowed.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSPortOSPFDeadInterval 1.3.6.1.4.1.494.4.16.2.1.22
The length of time in seconds before neighbors declare the router down after ceasing to hear a hello packet. It is recommended that this be set to 4 times the hello interval. Default value is 40. The dead interval must be longer than the hello interval.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSPortBootPFlags 1.3.6.1.4.1.494.4.16.2.1.23
Whether the interface forwards BootP and DHCP requests or not. Default is disabled.
OBJECT-TYPE    
  INTEGER relay-agent-enable(1), relay-agent-disable(0)  

ringswitchTLSStaticRouteTable 1.3.6.1.4.1.494.4.16.3
A table that contains a list of static routes.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSStaticRouteEntry

ringswitchTLSStaticRouteEntry 1.3.6.1.4.1.494.4.16.3.1
An that contains information about one static route.
OBJECT-TYPE    
  RingswitchTLSStaticRouteEntry  

ringswitchTLSStaticRouteCardNum 1.3.6.1.4.1.494.4.16.3.1.1
The TLS card number using a static route.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSStaticRouteIpAddress 1.3.6.1.4.1.494.4.16.3.1.2
The IP address of a static route.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSStaticRouteMask 1.3.6.1.4.1.494.4.16.3.1.3
The IP subnet mask to use in a static route.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSStaticRouteGateway 1.3.6.1.4.1.494.4.16.3.1.4
The IP address of a gateway to use in a static route. This table is indexed by the TLS card and the IP address of the route.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSStaticRouteMetric 1.3.6.1.4.1.494.4.16.3.1.5
The metric to use for a static route. Setting the value to zero will delete the entry. Setting it to a non-zero value will cause the route to be registered, so set this field after the gateway and mask.
OBJECT-TYPE    
  INTEGER 0..16  

ringswitchTLSRIPNeighbourTable 1.3.6.1.4.1.494.4.16.4
A table that contains a list of static routes.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSRIPNeighbourEntry

ringswitchTLSRIPNeighbourEntry 1.3.6.1.4.1.494.4.16.4.1
An that contains information about one static route.
OBJECT-TYPE    
  RingswitchTLSRIPNeighbourEntry  

ringswitchTLSRIPNeighbourCardNum 1.3.6.1.4.1.494.4.16.4.1.1
The TLS card number using a RIP Neighbour.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSRIPNeighbourIpAddress 1.3.6.1.4.1.494.4.16.4.1.2
The IP address of a RIP Neighbour.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSRIPNeighbourEnable 1.3.6.1.4.1.494.4.16.4.1.3
Setting to 1 marks the given IP address as a RIP neighbour. Setting to 2 removes the IP address from the list.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchTLSRIPAdvertTable 1.3.6.1.4.1.494.4.16.5
A table that contains a list of addresses to be advertised.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSRIPAdvertEntry

ringswitchTLSRIPAdvertEntry 1.3.6.1.4.1.494.4.16.5.1
One entry in the RIP advertisement table.
OBJECT-TYPE    
  RingswitchTLSRIPAdvertEntry  

ringswitchTLSRIPAdvertPortNum 1.3.6.1.4.1.494.4.16.5.1.1
TLS leg port number for rejection.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSRIPAdvertIpAddress 1.3.6.1.4.1.494.4.16.5.1.2
IP address for advertising.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSRIPAdvertEnable 1.3.6.1.4.1.494.4.16.5.1.3
Setting to 1 marks the given IP address for RIP advertisement. Setting to 2 removes the IP address from the list.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchTLSRIPRejectTable 1.3.6.1.4.1.494.4.16.6
A table that contains a list of addresses to be rejected.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSRIPRejectEntry

ringswitchTLSRIPRejectEntry 1.3.6.1.4.1.494.4.16.6.1
One entry in the RIP rejection table.
OBJECT-TYPE    
  RingswitchTLSRIPRejectEntry  

ringswitchTLSRIPRejectPortNum 1.3.6.1.4.1.494.4.16.6.1.1
TLE leg port number IP address for rejection.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSRIPRejectIpAddress 1.3.6.1.4.1.494.4.16.6.1.2
IP address for rejection.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSRIPRejectEnable 1.3.6.1.4.1.494.4.16.6.1.3
Setting to 1 marks the given IP address for RIP advertisement. Setting to 2 removes the IP address from the list.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchTLSOSPFAreaTable 1.3.6.1.4.1.494.4.16.7
A table that contains information about each OSPF area for a TLS.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSOSPFAreaEntry

ringswitchTLSOSPFAreaEntry 1.3.6.1.4.1.494.4.16.7.1
An entry containing information about one OSPF area.
OBJECT-TYPE    
  RingswitchTLSOSPFAreaEntry  

ringswitchTLSOSPFAreaCardNum 1.3.6.1.4.1.494.4.16.7.1.1
TLS card for OSPF area.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSOSPFAreaId 1.3.6.1.4.1.494.4.16.7.1.2
OSPF area identifier.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSOSPFAreaAddress 1.3.6.1.4.1.494.4.16.7.1.3
OSPF area address.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSOSPFAreaAddressMask 1.3.6.1.4.1.494.4.16.7.1.4
OSPF area address mask.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSOSPFAreaFlags 1.3.6.1.4.1.494.4.16.7.1.5
OSPF area flags. Bit 0 indicates address range active, Bit 1 indicates advertise address range, and bit 2 indicates external routing capability. Bit 15 is a destroy area flag. Setting this bit will cause the area to be deleted.
OBJECT-TYPE    
  INTEGER 0..32767  

ringswitchTLSBootPRAServerTable 1.3.6.1.4.1.494.4.16.8
A table containing BootP/DHCP servers that the BootP Relay Agent can forward BootP/DHCP packets to. BootP/DHCP requests will be shared amongst the servers in this table unless the requests specify a particular server name.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSBootPRAServerEntry

ringswitchTLSBootPRAServerEntry 1.3.6.1.4.1.494.4.16.8.1
Contains information about the BootP/DHCP server.
OBJECT-TYPE    
  RingswitchTLSBootPRAServerEntry  

ringswitchTLSBootPRAServerCardNum 1.3.6.1.4.1.494.4.16.8.1.1
The TLS card number using this BootP/DHCP server.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSBootPRAServerIpAddress 1.3.6.1.4.1.494.4.16.8.1.2
The IP address of this BootP/DHCP server.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSBootPRAServerName 1.3.6.1.4.1.494.4.16.8.1.3
The name of the BootP/DHCP server. Clients specifying this name in their BootP/DHCP requests have their request frames sent on to this particular server.
OBJECT-TYPE    
  OCTET STRING SIZE(64)  

ringswitchTLSBootPRAServerEnable 1.3.6.1.4.1.494.4.16.8.1.4
Setting to 1 adds a BootP Relay Agent server with this port and IP address to the list of BootP Relay Agent servers. Setting to 2 removes this BootP Relay Agent Server from the list.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchTLSVRRPVRTRTable 1.3.6.1.4.1.494.4.16.9
A table containing a list of VRRP virtual routers.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchTLSVRRPVRTREntry

ringswitchTLSVRRPVRTREntry 1.3.6.1.4.1.494.4.16.9.1
Contains information about the virtual router.
OBJECT-TYPE    
  RingswitchTLSVRRPVRTREntry  

ringswitchTLSVRRPVRTRPortNum 1.3.6.1.4.1.494.4.16.9.1.1
The TLS leg port that this virtual router is configured to use. There can be a maximum of 1 virtual router per leg port.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSVRRPVRTRIpAddress 1.3.6.1.4.1.494.4.16.9.1.2
The IP address of this VRRP virtual router. This must be a unique IP address on the same subnet as the leg port that the virtual router has been configured to use.
OBJECT-TYPE    
  IpAddress  

ringswitchTLSVRRPVRTRVRID 1.3.6.1.4.1.494.4.16.9.1.3
The VRRP virtual router ID. Only 1 virtual router with this ID can be used on any single Ringswitch.
OBJECT-TYPE    
  INTEGER 1..255  

ringswitchTLSVRRPVRTRMacAddress 1.3.6.1.4.1.494.4.16.9.1.4
This is the MAC address that the port will use for this VRRP virtual router. It will normally be derived from the virtual router VRID using the formula 00-00-7A-00-80-.
OBJECT-TYPE    
  TRNMacAddress  

ringswitchTLSVRRPVRTREnable 1.3.6.1.4.1.494.4.16.9.1.5
Setting to 1 adds a VRRP Virtual Router with this port and IP address to the list of VRRP virtual routers. Setting to 2 removes this virtual router from the list.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchTLSVRRPVRTRAdvertInterval 1.3.6.1.4.1.494.4.16.9.1.6
The length of time in seconds between sending VRRP advertisements. Default is 1 second. The value 0 is not allowed.
OBJECT-TYPE    
  INTEGER  

ringswitchTLSVRRPVRTRPriority 1.3.6.1.4.1.494.4.16.9.1.7
Priority value used for electing the master router for a VRRP virtual router. Default value is 100. A value of 255 will force this node to act as the master for this virtual router. A value of 0 will force this node to act as a backup.
OBJECT-TYPE    
  INTEGER 0..255  

ringswitchTLSVRRPVRTRAuthType 1.3.6.1.4.1.494.4.16.9.1.8
The type of authentication used by VRRP on this port.
OBJECT-TYPE    
  INTEGER none(1), simple(2)  

ringswitchTLSVRRPVRTRAuthKey 1.3.6.1.4.1.494.4.16.9.1.9
The authentication key to be used if ringswitchTLSVRRPVRTRAuthType is set to simple.
OBJECT-TYPE    
  OCTET STRING SIZE(8)  

ringswitchTLSVRRPVRTRAdvertDeadInterval 1.3.6.1.4.1.494.4.16.9.1.10
The length of time in seconds after which if no VRRP advert has been received by the master VRRP router then it will change to backup mode. Default is 4 seconds. The value 0 is not allowed. It is recommended that this value be 4 times the value set as the AdvertInterval.
OBJECT-TYPE    
  INTEGER  

fastFailoverWarning 1.3.6.1.4.1.494.4.17
Sent when a fast failover switch port causes a warning
TRAP-TYPE    
  ringswitchTRIfFastFailoverPrimaryPort  
  ringswitchTRIfFastFailoverTrapInfoReason  

ethernetSTPBlockingTrap 1.3.6.1.4.1.494.4.18
Sent when a Ethernet port is forced into blocking mode due to the presence of a 3rd party bridge. Also sent when the port comes out of blocking
TRAP-TYPE    
  ringswitchEthernetIfIndex  
  ringswitchEthernetIfSTPBlockingTrapInfo  

ringswitchEthernet 1.3.6.1.4.1.494.4.21
OBJECT IDENTIFIER    

ringswitchEthernetIfTable 1.3.6.1.4.1.494.4.21.1
This table contains Ethernet interface parameters and state variables applying to each ethernet port, and Ethernet-type interface parameters to configure translational bridging to Token Ring.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchEthernetIfEntry

ringswitchEthernetIfEntry 1.3.6.1.4.1.494.4.21.1.1
A list of Ethernet status and parameter values for a ethernet interface, plus a list of Ethernet-type interface parameters to configure translational bridging to Token-Ring
OBJECT-TYPE    
  RingswitchEthernetIfEntry  

ringswitchEthernetIfIndex 1.3.6.1.4.1.494.4.21.1.1.1
The port number of the Ethernet port for which this entry contains Ethernet information.
OBJECT-TYPE    
  INTEGER 1..65535  

ringswitchEthernetIfIPXEthType 1.3.6.1.4.1.494.4.21.1.1.2
This variable specifies the encapsulation type on the Ethernet card for all forwarded IPX frames from a TRN.
OBJECT-TYPE    
  INTEGER auto(1), ieee8022(2), snap(3), ieee8023(4), dix(5)  

ringswitchEthernetIfOperIPXEthType 1.3.6.1.4.1.494.4.21.1.1.3
This variable specifies the actual encapsulation type for all IPX frames forwarded onto Ethernet
OBJECT-TYPE    
  INTEGER unknown(1), ieee8022(2), snap(3), ieee8023(4), dix(5)  

ringswitchEthernetIfIPXTRType 1.3.6.1.4.1.494.4.21.1.1.4
This variable specifies the encapsulation type on TRN for all IPX frames forwarded from an Ethernet port
OBJECT-TYPE    
  INTEGER auto(1), ieee8022(2), snap(3)  

ringswitchEthernetIfOperIPXTRType 1.3.6.1.4.1.494.4.21.1.1.5
This variable specifies the actual encapsulation type for all IPX frames forwarded onto Token Ring
OBJECT-TYPE    
  INTEGER unknown(1), ieee8022(2), snap(3)  

ringswitchEthernetIfIPXEnable 1.3.6.1.4.1.494.4.21.1.1.6
If this variable is enabled on an Ethernet port then the port will do translational bridging of IPX frames, otherwise it will discard them. It is ignored for Token Ring ports
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchEthernetIfIPEnable 1.3.6.1.4.1.494.4.21.1.1.7
If this variable is enabled on an Ethernet port then the port will do translational bridging of IP, ARP and RARP frames, otherwise it will discard them. It is ignored for Token Ring ports
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ringswitchEthernetIfAdminSpeed 1.3.6.1.4.1.494.4.21.1.1.8
This variable specifies the speed that the Ethernet port will open at.
OBJECT-TYPE    
  INTEGER auto(1), speed10Mbps(2), speed100Mbps(3), speed1000Mbps(4)  

ringswitchEthernetIfOperSpeed 1.3.6.1.4.1.494.4.21.1.1.9
The current operational speed of the network to which this interface is connected.
OBJECT-TYPE    
  INTEGER unknown(1), ten(2), hundred(3), thousand(4)  

ringswitchEthernetIfAdminDuplexMode 1.3.6.1.4.1.494.4.21.1.1.10
This variable specifies the duplex mode of the Ethernet port.
OBJECT-TYPE    
  INTEGER auto(1), half(2), full(3)  

ringswitchEthernetIfOperDuplexMode 1.3.6.1.4.1.494.4.21.1.1.11
The current operational mode of this interface.
OBJECT-TYPE    
  INTEGER unknown(1), half-duplex(2), full-duplex(3)  

ringswitchEthernetIfIPMulticastType 1.3.6.1.4.1.494.4.21.1.1.12
This variable specifies the type of MAC address to use as the destination for IP multicast frames on Token Ring
OBJECT-TYPE    
  INTEGER broadcast(1), functional(2), group(3)  

ringswitchEthernetIfCacheClear 1.3.6.1.4.1.494.4.21.1.1.13
This variable clears the RIF cache
OBJECT-TYPE    
  INTEGER clear(1)  

ringswitchEthernetIfSPTEncaps 1.3.6.1.4.1.494.4.21.1.1.14
This variable specifies whether BPDU's received from Ethernet are encapsulated when forwared onto Token Ring. Encapsulated BPDU's are de-encapsulated when forwarded to Ethernet
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchEthernetIfPriorityTagging 1.3.6.1.4.1.494.4.21.1.1.15
When this variable is enabled, frames onto ethernet ring are priority tagged (using 802.1p) with the token ring priority
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

ringswitchEthernetIfPriorityTaggingVLANId 1.3.6.1.4.1.494.4.21.1.1.16
VLAN ID to be used when ringswitchEthernetIfPriorityTagging is enabled.
OBJECT-TYPE    
  INTEGER 0..4095  

ringswitchEthernetIfAdminIPXNetwork 1.3.6.1.4.1.494.4.21.1.1.17
The IPX network number of the port. If this is zero then the IPX network number is learned automatically.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetIfOperIPXNetwork 1.3.6.1.4.1.494.4.21.1.1.18
The actual IPX network number of the port.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetIfSTPBlockingTrapInfo 1.3.6.1.4.1.494.4.21.1.1.19
Trap set if circulating encapsulated BPDU frames are detected (indicating a 3rd party bridge) which cause the port to go into blocking mode. A trap is also sent if the port becomes unblocked after previously being blocked.
OBJECT-TYPE    
  INTEGER blocked(1), unblocked(2)  

ringswitchEthernetIfAdminFlowCtrl 1.3.6.1.4.1.494.4.21.1.1.20
This variable specifies the flow control abilities that the Gigabit port will use. For 10/100 Ethernet ports this variable will always be not-applicable.
OBJECT-TYPE    
  INTEGER not-applicable(1), no-pause(2), tx-pause(3), rx-pause(4), tx-rx-pause(5)  

ringswitchEthernetIfOperFlowCtrl 1.3.6.1.4.1.494.4.21.1.1.21
The current flow control operational mode for the Gigabit interface. For 10/100 Ethernet ports this variable will always be unknown.
OBJECT-TYPE    
  INTEGER unknown(1), no-pause(2), tx-pause(3), rx-pause(4), tx-rx-pause(5)  

ringswitchEthernetIfAutoNegotiate 1.3.6.1.4.1.494.4.21.1.1.22
This variable specifies whether the Gigabit interface will auto-negotiate the link properties or whether it will force the link up. For 10/100 Ethernet interfaces this variable will always be not applicable. Auto-negotiation for 10/100 Ethernet is done by setting the speed or duplex mode to auto.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), not-applicable(3)  

ringswitchEthernetIfMediaType 1.3.6.1.4.1.494.4.21.1.1.23
This variable specifies the media type of the 10/100 Ethernet or Gigabit port.
OBJECT-TYPE    
  INTEGER copper(1), fibre-sx(2), fibre-lx(3)  

ringswitchEthernetIfAdminMaxFrameSize 1.3.6.1.4.1.494.4.21.1.1.24
The maximum frame size requested for the Ethernet or Gigabit port. For 10/100 Ethernet this value can only be set to 1514. For Gigabit other larger values are supported for jumbo frames. Any changes to this value will not take place until the switch is rebooted. The max size available will be dependent on the switch buffer size - 5K or 18K.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetIfOperMaxFrameSize 1.3.6.1.4.1.494.4.21.1.1.25
The maximum frame size currently used on the Ethernet or Gigabit port. For 10/100 Ethernet this value can only be 1514. For Gigabit other larger values are supported for jumbo frames.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetXBDupAddrTable 1.3.6.1.4.1.494.4.21.2
This table duplicate mac address information
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchEthernetXBDupAddrEntry

ringswitchEthernetXBDupAddrEntry 1.3.6.1.4.1.494.4.21.2.1
A list of duplicate mac addresses for each Ethernet port in the rsw
OBJECT-TYPE    
  RingswitchEthernetXBDupAddrEntry  

ringswitchEthernetXBDupAddrIfIndex 1.3.6.1.4.1.494.4.21.2.1.1
The value of this object identifies the ethernet interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetXBDupAddrIndex 1.3.6.1.4.1.494.4.21.2.1.2
An arbitrary index ...
OBJECT-TYPE    
  INTEGER 1..10  

ringswitchEthernetXBDupAddrMacAddress 1.3.6.1.4.1.494.4.21.2.1.3
OBJECT-TYPE    
  TRNMacAddress  

ringswitchEthernetXBToTRNStatsTable 1.3.6.1.4.1.494.4.21.3
This table contains information relating to the forwarding statistics that are maintained by each ethernet interface acting as a translational bridge to Token-ring.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchEthernetXBToTRNStatsEntry

ringswitchEthernetXBToTRNStatsEntry 1.3.6.1.4.1.494.4.21.3.1
A list of information relating to the forwarding statistics of a single ethernet interface acting as a translational bridge to Token-ring.
OBJECT-TYPE    
  RingswitchEthernetXBToTRNStatsEntry  

ringswitchEthernetXBToTRNStatsIfIndex 1.3.6.1.4.1.494.4.21.3.1.1
The value of this object identifies the ethernet interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetXBToTRNStatsDiscSptEncapsBlock 1.3.6.1.4.1.494.4.21.3.1.2
The number of received frames discarded by this interface because the encasulated spanning tree detected a 3rd party bridge loop and has forced blocking. These frames will be counted in forwarding statistics even though the frame is discarded.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscFilter 1.3.6.1.4.1.494.4.21.3.1.3
The number of received frames discarded by this interface because the DA was known to be on Ethernet.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscBPDU 1.3.6.1.4.1.494.4.21.3.1.4
The number of BPDU's received from Ethernet which have been discarded (i.e. not received) by this interface because they could not be encapsulated (e.g. because they are too big). Only counted when encapsulated SPT is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscBPDUEncaps 1.3.6.1.4.1.494.4.21.3.1.5
The number of received encapsulated BPDU frames discarded by this interface because they are invalid or duplicates. Only counted when encapsulated SPT is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscTag8021qCfi 1.3.6.1.4.1.494.4.21.3.1.6
The number of received frames discarded by this interface because they are 802.1Q encapsulated Token Ring frames.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscTag8021qVlan 1.3.6.1.4.1.494.4.21.3.1.7
The number of received frames discarded by this interface because they have an 802.1Q tag with the wrong VLAN id. Only counted when ethernet tagging is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscBadRif 1.3.6.1.4.1.494.4.21.3.1.8
The number of received frames discarded by this interface because a non-cached RIF is invalid.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscHopLimit 1.3.6.1.4.1.494.4.21.3.1.9
The number of received frames discarded by this interface because a non-cached RIF is longer than the hop-count limit.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscDuplicateRin 1.3.6.1.4.1.494.4.21.3.1.10
The number of received frames discarded by this interface because a non-cached RIF contains the interface's ring number twice.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscIPDisabled 1.3.6.1.4.1.494.4.21.3.1.11
The number of received frames discarded by this interface because IP forwarding is disabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscARPDisabled 1.3.6.1.4.1.494.4.21.3.1.12
The number of received ARP and RARP frames discarded by this interface because IP forwarding is disabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscNCPCache 1.3.6.1.4.1.494.4.21.3.1.13
The number of received NCP requests discarded by this interface because they could not be cached.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscIPXDisabled 1.3.6.1.4.1.494.4.21.3.1.14
The number of received frames discarded by this interface because IPX forwarding is disabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscIPXTypeSnap 1.3.6.1.4.1.494.4.21.3.1.15
The number of received IPX SNAP frames discarded by this interface because SNAP encapsulation is not selected on this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscIPXType8022 1.3.6.1.4.1.494.4.21.3.1.16
The number of received 802.2 IPX frames discarded by this interface because 802.2 encapsulation is not selected on this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscIPXType8023 1.3.6.1.4.1.494.4.21.3.1.17
The number of received 802.3 IPX frames discarded by this interface because 802.3 encapsulation is not selected on this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsDiscIPXTypeDix 1.3.6.1.4.1.494.4.21.3.1.18
The number of received DIX IPX frames discarded by this interface because DIX encapsulation is not selected on this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsNoFakeBuffer 1.3.6.1.4.1.494.4.21.3.1.19
The number of ICMP can't fragment frames which could not be sent due to resource limitations.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsCacheFull 1.3.6.1.4.1.494.4.21.3.1.20
The number of frames received by this interface whose source address could not be cached because the cache is full.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdIPFrames 1.3.6.1.4.1.494.4.21.3.1.21
The number of received IP frames forwarded to Token Ring by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdIPMulticast 1.3.6.1.4.1.494.4.21.3.1.22
The number of received IP multicast frames forwarded to Token Ring by this interface. These are included in the count of IP frames.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdARPFrames 1.3.6.1.4.1.494.4.21.3.1.23
The number of received ARP an RARP frames forwarded to Token Ring by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdIPXFrames 1.3.6.1.4.1.494.4.21.3.1.24
The number of received IPX frames forwarded to Token Ring by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdAARPPh1Frames 1.3.6.1.4.1.494.4.21.3.1.25
The number of received Appletalk phase 1 (Ethertype) frames forwarded to Token Ring by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdAARPPh2Frames 1.3.6.1.4.1.494.4.21.3.1.26
The number of received Appletalk phase 2 (SNAP) frames forwarded to Token Ring by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdOtherEthFrames 1.3.6.1.4.1.494.4.21.3.1.27
The number of received Ethertype frames forwarded to Token Ring by this interface which have not been included in a more specific counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdZeroOUIFrames 1.3.6.1.4.1.494.4.21.3.1.28
The number of received zero OUI SNAP frames that have been converted to 802.1H tunnel frames and forwarded to Token Ring by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdOtherDLCFrames 1.3.6.1.4.1.494.4.21.3.1.29
The number of received non-zero OUI SNAP and other DLC frames that have been forwarded to Token Ring and which have not been included in a more specific counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdBPDUEncaps 1.3.6.1.4.1.494.4.21.3.1.30
The number of received BPDU's which have been encapsulated before being forwarded to Token Ring. Only counted when encapsulated SPT is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBToTRNStatsFwdBPDUDecaps 1.3.6.1.4.1.494.4.21.3.1.31
The number of received BPDU's which have been de-encapsulated before being forwarded to Token Ring. Only counted when encapsulated SPT is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsTable 1.3.6.1.4.1.494.4.21.4
This table contains information relating to the forwarding statistics that are maintained by each ethernet interface acting as a translational bridge from Token-ring.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchEthernetXBFromTRNStatsEntry

ringswitchEthernetXBFromTRNStatsEntry 1.3.6.1.4.1.494.4.21.4.1
A list of information relating to the forwarding statistics of a single ethernet interface acting as a translational bridge from Token-ring.
OBJECT-TYPE    
  RingswitchEthernetXBFromTRNStatsEntry  

ringswitchEthernetXBFromTRNStatsIfIndex 1.3.6.1.4.1.494.4.21.4.1.1
The value of this object identifies the ethernet interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetXBFromTRNStatsDiscTooBig 1.3.6.1.4.1.494.4.21.4.1.2
The number of frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because after translation to Ethernet they were bigger than 1514 bytes. These frames are counted by the forwarding counters even though they are discarded.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscSptEncapsBlock 1.3.6.1.4.1.494.4.21.4.1.3
The number of frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because the encasulated spanning tree detected a 3rd party bridge loop and has forced blocking. These frames are counted by the forwarding counters even though they are discarded.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscFilter 1.3.6.1.4.1.494.4.21.4.1.4
The number of frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because the destination MAC address was known to be on Token Ring.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscBPDU 1.3.6.1.4.1.494.4.21.4.1.5
The number of BPDU's received from Token Ring which have been discarded (i.e. not transmitted) by this interface because they could not be encapsulated (e.g. because they are too big). Only counted when encapsulated SPT is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscBPDUEncaps 1.3.6.1.4.1.494.4.21.4.1.6
The number of encapsulated BPDU's received from Token Ring which have been discarded (i.e. not transmitted) by this interface because they are invalid or are ARE duplicates. Only counted when encapsulated SPT is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscTag8021qCfi 1.3.6.1.4.1.494.4.21.4.1.7
The number of frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because they are 802.1Q encapsulated Ethernet frames.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscTag8021qVlan 1.3.6.1.4.1.494.4.21.4.1.8
The number of frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because they have an 802.1Q tag with the wrong VLAN id. Only counted when Ethernet Tagging is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscBadRIF 1.3.6.1.4.1.494.4.21.4.1.9
The number of frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because the RIF is invalid.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscZeroRingNum 1.3.6.1.4.1.494.4.21.4.1.10
The number of source-routed frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because we do not have a ring number for the interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscNonTermRIF 1.3.6.1.4.1.494.4.21.4.1.11
The number of specifically routed frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface becuase the interface's ring number is not last in the RIF.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscIPDisabled 1.3.6.1.4.1.494.4.21.4.1.12
The number of IP frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because IP forwarding is disabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscARPDisabled 1.3.6.1.4.1.494.4.21.4.1.13
The number of ARP and RARP frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because IP forwarding is disabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscIPCantFrag 1.3.6.1.4.1.494.4.21.4.1.14
The number of IP frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because they need fragmenting but the DONT-FRAG bit is set. An ICMP frame will be sent back to the source.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscNCPCache 1.3.6.1.4.1.494.4.21.4.1.15
The number of NCP request frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because they could not be cached.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscIPXDisabled 1.3.6.1.4.1.494.4.21.4.1.16
The number of IPX frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface because IPX forwarding is disabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscIPXTypeSnap 1.3.6.1.4.1.494.4.21.4.1.17
The number of IPX SNAP frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface becuase SNAP encapsulation has not been selected.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsDiscIPXType8022 1.3.6.1.4.1.494.4.21.4.1.18
The number of IPX 802.2 frames received from Token Ring which have been discarded (i.e. not transmitted) by this interface becuase 802.2 encapsulation has not been selected.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsCacheFull 1.3.6.1.4.1.494.4.21.4.1.19
The number of frames received from Token Ring whose source MAC address could not be cached because the cache is full. The frame is still forwarded.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsRIFCacheFull 1.3.6.1.4.1.494.4.21.4.1.20
The number of source-routed frames received from Token Ring whose whose RIF could not be cached because the RIF cache is full. The frame is still forwarded.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdIPFrames 1.3.6.1.4.1.494.4.21.4.1.21
The number of IP frames received from Token Ring which have been forwarded by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdIPFragmented 1.3.6.1.4.1.494.4.21.4.1.22
The number of IP frames received from Token Ring which have been fragmented before being forwarded by this interface. These are also included in the count of IP frames.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdIPMulticast 1.3.6.1.4.1.494.4.21.4.1.23
The number of IP multicast frames received from Token Ring that have been forwarded by this interface. These are also included in the count of IP frames.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdARPFrames 1.3.6.1.4.1.494.4.21.4.1.24
The number of ARP and RARP frames received from Token Ring which have been forwarded by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdIPXFrames 1.3.6.1.4.1.494.4.21.4.1.25
The number of IPX frames received from Token Ring which have been forwarded by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdAARPPh1Frames 1.3.6.1.4.1.494.4.21.4.1.26
The number of Appletalk phase 1 frames (802.1H tunnel encapsulated) ARP frames received from Token Ring which have been forwarded by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdAARPPh2Frames 1.3.6.1.4.1.494.4.21.4.1.27
The number of Appletalk phase 2 frames (SNAP encapsulated) ARP frames received from Token Ring which have been forwarded by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdTunnel8021hFrames 1.3.6.1.4.1.494.4.21.4.1.28
The number of 802.1H tunnel frames received from Token Ring which have been converted to zero OUI SNAP frames before being forwarded by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdZeroOUISnapFrames 1.3.6.1.4.1.494.4.21.4.1.29
The number of other zero OUI SNAP frames received from Token Ring which have been converted to Ethertype frames before being forwarded by this interface.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdOtherDLCFrames 1.3.6.1.4.1.494.4.21.4.1.30
The number of non-zero OUI SNAP and other DLC frames received from Token Ring which have been forwarded by this interface and which have not been included in a more specific counter.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdBPDUDecaps 1.3.6.1.4.1.494.4.21.4.1.31
The number of encapsulated BPDU's received from Token Ring which have been de-encapsulated before being forwarded on this interface. Only counted when encapsulated SPT is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetXBFromTRNStatsFwdBPDUEncaps 1.3.6.1.4.1.494.4.21.4.1.32
The number of BPDU's received from Token Ring which have been encapsulated before being forwarded on this interface. Only counted when encapsulated SPT is enabled.
OBJECT-TYPE    
  INTEGER48  

ringswitchEthernetExtPhysStatsTable 1.3.6.1.4.1.494.4.21.5
This table contains physical layer statistics associated with the gigabit interface that are not available through the normal Ethernet physical layer statistics.
OBJECT-TYPE    
  SEQUENCE OF  
    RingswitchEthernetExtPhysStatsEntry

ringswitchEthernetExtPhysStatsEntry 1.3.6.1.4.1.494.4.21.5.1
A list of information relating to the physical layer statistics of a single gigabit interface.
OBJECT-TYPE    
  RingswitchEthernetExtPhysStatsEntry  

ringswitchEthernetExtPhysStatsIfIndex 1.3.6.1.4.1.494.4.21.5.1.1
The value of this object identifies the gigabitt interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object for the same interface.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetExtPhysStatsRxDataErrors 1.3.6.1.4.1.494.4.21.5.1.2
The number of frames received with I-RX-ER asserted by the front end.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetExtPhysStatsRxSequenceErrors 1.3.6.1.4.1.494.4.21.5.1.3
The number of sequence errors in the symbol ordering received on the TBI interface.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetExtPhysStatsRxCarrierExtErrors 1.3.6.1.4.1.494.4.21.5.1.4
The number of receive data errors that were detected during the carrier extension time of packet reception.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetExtPhysStatsXonRxFrames 1.3.6.1.4.1.494.4.21.5.1.5
The number of XON flow control frames received.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetExtPhysStatsXonTxFrames 1.3.6.1.4.1.494.4.21.5.1.6
Ther number of XON flow control frames transmitted.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetExtPhysStatsXoffRxFrames 1.3.6.1.4.1.494.4.21.5.1.7
The number of XOFF flow control frames received.
OBJECT-TYPE    
  INTEGER  

ringswitchEthernetExtPhysStatsXoffTxFrames 1.3.6.1.4.1.494.4.21.5.1.8
The number of XOFF flow control frames transmitted.
OBJECT-TYPE    
  INTEGER  

Defined Objects

DisplayString  
OCTET STRING    

INTEGER48  
OCTET STRING SIZE(6)    

NSAP  
OCTET STRING SIZE(20)    

TRNMacAddress  
OCTET STRING SIZE(6)    

ETHMacAddress  
OCTET STRING SIZE(6)    

RingswitchRowStatus  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)    

RingswitchPortEntry  
SEQUENCE    
  INTEGER as ringswitchPortNum  
  INTEGER as ringswitchPortRingStatus  
  INTEGER as ringswitchPortAdapterStatus  
  INTEGER as ringswitchPortMediaType  
  INTEGER as ringswitchPortIfMode  
  INTEGER as ringswitchPortRingSpeed  
  INTEGER as ringswitchPortTestState  
  INTEGER as ringswitchPortTestError  
  INTEGER as ringswitchPortTestPhase  
  INTEGER as ringswitchPortSummary  
  TRNMacAddress as ringswitchPortAddress  
  TRNMacAddress as ringswitchPortLAA  
  INTEGER as ringswitchPortStationType  
  INTEGER as ringswitchPortRPSEnable  
  INTEGER as ringswitchPortCutThruEnable  
  INTEGER48 as ringswitchPortInOctets  
  INTEGER48 as ringswitchPortOutOctets  
  INTEGER48 as ringswitchPortSpecInFrames  
  INTEGER48 as ringswitchPortSpecOutFrames  
  INTEGER48 as ringswitchPortApeInFrames  
  INTEGER48 as ringswitchPortApeOutFrames  
  INTEGER48 as ringswitchPortSteInFrames  
  INTEGER48 as ringswitchPortSteOutFrames  
  INTEGER as ringswitchPortResetCounters  
  INTEGER as ringswitchPortFixupMode  
  INTEGER as ringswitchPortForwardMode  
  INTEGER as ringswitchPortRMONCapabilities  
  INTEGER as ringswitchPortRMONMode  
  TRNMacAddress as ringswitchPortRMONSnoop  
  INTEGER48 as ringswitchPortTransparentInFrames  
  INTEGER48 as ringswitchPortTransparentOutFrames  
  INTEGER48 as ringswitchPortTransparentDiscFrames  
  OCTET STRING as ringswitchPortLEDs  

RingswitchFwdPortEntry  
SEQUENCE    
  INTEGER as ringswitchFwdPort  
  INTEGER as ringswitchFwdPortMode  
  INTEGER as ringswitchFwdPortStationType  
  INTEGER as ringswitchFwdPortCutThruEnable  
  INTEGER48 as ringswitchFwdPortSpecInFrames  
  INTEGER48 as ringswitchFwdPortSpecOutFrames  
  INTEGER48 as ringswitchFwdPortApeInFrames  
  INTEGER48 as ringswitchFwdPortApeOutFrames  
  INTEGER48 as ringswitchFwdPortSteInFrames  
  INTEGER48 as ringswitchFwdPortSteOutFrames  
  INTEGER48 as ringswitchFwdPortTransparentInFrames  
  INTEGER48 as ringswitchFwdPortTransparentOutFrames  
  INTEGER48 as ringswitchFwdPortTransparentDiscFrames  
  INTEGER as ringswitchFwdPortTestState  
  INTEGER as ringswitchFwdPortTestError  
  INTEGER as ringswitchFwdPortTestPhase  
  INTEGER as ringswitchFwdPortTbForce  
  INTEGER as ringswitchFwdPortStpMaster  
  INTEGER as ringswitchFwdPortTbState  
  INTEGER as ringswitchFwdPortSteState  
  INTEGER48 as ringswitchFwdPortTbUnicastInFrames  
  INTEGER48 as ringswitchFwdPortTbUnicastOutFrames  
  INTEGER48 as ringswitchFwdPortTbBroadcastInFrames  
  INTEGER48 as ringswitchFwdPortTbBroadcastOutFrames  
  INTEGER48 as ringswitchFwdPortTbMulticastInFrames  
  INTEGER48 as ringswitchFwdPortTbMulticastOutFrames  
  INTEGER48 as ringswitchFwdPortTbMiscInFrames  
  INTEGER48 as ringswitchFwdPortTbMiscOutFrames  
  OCTET STRING as ringswitchFwdPortMatrixSrSpecFrames  
  OCTET STRING as ringswitchFwdPortMatrixTbUniFrames  
  INTEGER as ringswitchFwdPortEthernetSRBlk  
  INTEGER as ringswitchFwdPortAutoPathCost  
  INTEGER as ringswitchFwdPortBroadcastReflect  

LCDText  
OCTET STRING SIZE(50)    

RingswitchLCDTableEntry  
SEQUENCE    
  INTEGER as ringswitchLCDNum  
  LCDText as ringswitchLCDMsgText  
  INTEGER as ringswitchLCDUp  
  INTEGER as ringswitchLCDDown  

RingswitchLANEntry  
SEQUENCE    
  INTEGER as ringswitchLANIndex  
  DisplayString as ringswitchLANName  
  INTEGER as ringswitchLANPermeable  
  INTEGER as ringswitchLANStatus  

RingswitchLANRingEntry  
SEQUENCE    
  INTEGER as ringswitchLANRingGroup  
  INTEGER as ringswitchLANRingIndex  
  INTEGER as ringswitchLANRingNum  
  INTEGER as ringswitchLANRingStatus  

RingswitchVirtTBEntry  
SEQUENCE    
  INTEGER as ringswitchVirtTBIndex  
  RingswitchRowStatus as ringswitchVirtTBStatus  
  DisplayString as ringswitchVirtTBName  
  INTEGER as ringswitchVirtTBType  
  OCTET STRING as ringswitchVirtTBNumArray  
  INTEGER as ringswitchVirtTBNumSize  

RingswitchSlotEntry  
SEQUENCE    
  INTEGER as ringswitchSlotIndex  
  INTEGER as ringswitchSlotStatus  
  INTEGER as ringswitchSlotBasePort  
  INTEGER as ringswitchSlotCardType  
  INTEGER as ringswitchSlotCardId  
  INTEGER as ringswitchSlotCardRevision  
  DisplayString as ringswitchSlotCardDescription  
  INTEGER as ringswitchSlotCardNumPorts  
  INTEGER as ringswitchSlotCardLAN  
  OCTET STRING as ringswitchSlotCardLEDs  
  OCTET STRING as ringswitchSlotIfAdminStatus  
  OCTET STRING as ringswitchSlotAdapterStatus  
  OCTET STRING as ringswitchSlotTestError  
  OCTET STRING as ringswitchSlotPortHealth  
  INTEGER as ringswitchSlotLastStatus  
  OCTET STRING as ringswitchSlotPortCreated  
  INTEGER as ringswitchSlotHealth  
  INTEGER as ringswitchSlotVersion  

RingswitchGenPortEntry  
SEQUENCE    
  INTEGER as ringswitchGenPortNum  
  INTEGER as ringswitchGenPortAdapterStatus  
  TRNMacAddress as ringswitchGenPortAddress  
  TRNMacAddress as ringswitchGenPortLAA  
  INTEGER48 as ringswitchGenPortInOctets  
  INTEGER48 as ringswitchGenPortOutOctets  
  INTEGER as ringswitchGenPortResetCounters  
  INTEGER as ringswitchGenPortRMONCapabilities  
  INTEGER as ringswitchGenPortRMONMode  
  TRNMacAddress as ringswitchGenPortRMONSnoop  
  INTEGER as ringswitchGenPortIPXNet  
  INTEGER as ringswitchGenPortLastStatus  
  INTEGER as ringswitchGenPortCreate  
  INTEGER as ringswitchGenPortHealth  

RingswitchTRIfEntry  
SEQUENCE    
  INTEGER as ringswitchTRIfIndex  
  INTEGER as ringswitchTRIfRingSpeed  
  INTEGER as ringswitchTRIfMode  
  INTEGER as ringswitchTRIfRPSEnable  
  INTEGER as ringswitchTRIfRingStatus  
  INTEGER as ringswitchTRIfSoftErrTimer  
  INTEGER as ringswitchTRIfFrameStatusControl  
  INTEGER as ringswitchTRIfTokenPriorityControl  
  INTEGER as ringswitchTRIfFastFailoverEnable  
  INTEGER as ringswitchTRIfFastFailoverStandbyStatus  
  INTEGER as ringswitchTRIfFastFailoverPrimaryPort  
  INTEGER as ringswitchTRIfFastFailoverTrapInfoReason  

RingswitchTRGrpSwtchEntry  
SEQUENCE    
  INTEGER as ringswitchTRGrpSwtchIfIndex  
  INTEGER as ringswitchTRGrpSwtchRemoveThreshold  
  INTEGER as ringswitchTRGrpSwtchRingPollAction  
  INTEGER as ringswitchTRGrpSwtchBeaconThreshold  
  INTEGER as ringswitchTRGrpSwtchBeaconAction  
  INTEGER as ringswitchTRGrpSwtchPurgeThreshold  
  INTEGER as ringswitchTRGrpSwtchPurgeAction  
  INTEGER as ringswitchTRGrpSwtchIsoErrThreshold  
  INTEGER as ringswitchTRGrpSwtchIsoErrAction  
  INTEGER as ringswitchTRGrpSwtchRingPollThreshold  

RingswitchTRGrpSwtchPortEntry  
SEQUENCE    
  INTEGER as ringswitchTRGrpSwtchPortIfIndex  
  INTEGER as ringswitchTRGrpSwtchPortIndex  
  TRNMacAddress as ringswitchTRGrpSwtchPortAddress  

RingswitchTRGrpSwtchSlotEntry  
SEQUENCE    
  INTEGER as ringswitchTRGrpSwtchSlotIndex  
  OCTET STRING as ringswitchTRGrpSwtchSlotAdminStatii  
  OCTET STRING as ringswitchTRGrpSwtchSlotAutoPartitions  
  OCTET STRING as ringswitchTRGrpSwtchSlotOperStatii  

RingswitchFDDICardEntry  
SEQUENCE    
  INTEGER as ringswitchFDDICardNum  
  INTEGER as ringswitchFDDICardSMTIndex  
  INTEGER as ringswitchFDDICardFixupMode  
  INTEGER as ringswitchFDDICardVRStatus  
  INTEGER as ringswitchFDDICardVRRingNum  
  INTEGER as ringswitchFDDICardVRBridgeNum  
  INTEGER as ringswitchFDDICardStatus  

RingswitchATMCardEntry  
SEQUENCE    
  INTEGER as ringswitchATMCardNum  
  INTEGER as ringswitchATMCardAdminStatus  
  INTEGER as ringswitchATMCardRemoteUNIVer  
  NSAP as ringswitchATMCardLECSAddress  
  INTEGER as ringswitchATMCardLECSIlmi  
  INTEGER as ringswitchATMCardLECSWka  
  INTEGER as ringswitchATMCardLECSPvc  
  INTEGER as ringswitchATMCardActivePort  
  INTEGER as ringswitchATMCardILMIStatus  
  INTEGER as ringswitchATMCardSignalStatus  
  ETHMacAddress as ringswitchATMCardHardWiredESI  
  ETHMacAddress as ringswitchATMCardLocalESI  
  INTEGER as ringswitchATMCardPortB  
  INTEGER as ringswitchATMCardMode  
  INTEGER as ringswitchATMCardSONETIfIndex  
  INTEGER as ringswitchATMCardATMIfIndex  
  INTEGER as ringswitchATMCardAAL5IfIndex  
  OCTET STRING as ringswitchATMCardRowStatuses  
  INTEGER as ringswitchATMCardMediaType  
  INTEGER as ringswitchATMCardConfigUNIVer  
  INTEGER as ringswitchATMCardActualUNIVer  
  INTEGER as ringswitchATMCardEthLecSupport  

RingswitchATMPortEntry  
SEQUENCE    
  INTEGER as ringswitchATMPortNum  
  INTEGER as ringswitchATMPortFailReason  
  INTEGER as ringswitchATMPortFailSecondary  
  INTEGER as ringswitchATMPortRxDiscards  
  INTEGER as ringswitchATMPortTxDiscards  
  INTEGER as ringswitchATMPortTxQuotaDiscards  
  INTEGER as ringswitchATMPortTxBUSBroadcasts  
  INTEGER as ringswitchATMPortTxBUSUnknowns  
  INTEGER as ringswitchATMPortRxBUSFiltered  
  INTEGER as ringswitchATMPortIPXTypeETH  
  INTEGER as ringswitchATMPortIPXTypeTRN  
  INTEGER as ringswitchATMPortIPXEvenize  
  INTEGER as ringswitchATMPortIPXBufLimit  
  INTEGER as ringswitchATMPortIPXEnable  
  INTEGER as ringswitchATMPortIPEnable  
  INTEGER as ringswitchATMPortIPMulticastType  

RingswitchTLSCardEntry  
SEQUENCE    
  INTEGER as ringswitchTLSCardNum  
  OCTET STRING as ringswitchTLSCardRowStatuses  
  INTEGER as ringswitchTLSCardRIPTTL  
  INTEGER as ringswitchTLSCardRIPInterval  
  INTEGER as ringswitchTLSCardRIPAging  
  IpAddress as ringswitchTLSCardDefRoute  
  INTEGER as ringswitchTLSCardDefRouteMetric  
  INTEGER as ringswitchTLSCardRIPFlags  
  IpAddress as ringswitchTLSCardOSPFRouterId  
  INTEGER as ringswitchTLSCardOSPFFlags  
  INTEGER as ringswitchTLSCardStatsCpuUsage  
  INTEGER as ringswitchTLSCardStatsFreeMem  
  INTEGER as ringswitchTLSCardStatsFramesFwd  
  INTEGER as ringswitchTLSCardStatsMaxCpuUsage  
  INTEGER as ringswitchTLSCardStatsMinFreeMem  
  INTEGER as ringswitchTLSCardStatsMaxFramesFwd  
  INTEGER as ringswitchTLSCardStatsResetState  
  INTEGER as ringswitchTLSCardARPFlush  
  INTEGER as ringswitchTLSCardBootPRASecondsThreshold  
  INTEGER as ringswitchTLSCardBootPRAHopsThreshold  

RingswitchTLSPortEntry  
SEQUENCE    
  INTEGER as ringswitchTLSPortNum  
  DisplayString as ringswitchTLSPortName  
  INTEGER as ringswitchTLSPortMTU  
  INTEGER as ringswitchTLSPortEnable  
  IpAddress as ringswitchTLSPortIpAddress  
  IpAddress as ringswitchTLSPortIpSubnetMask  
  INTEGER as ringswitchTLSPortRIPRxType  
  INTEGER as ringswitchTLSPortRIPTxType  
  INTEGER as ringswitchTLSPortRIPFlags  
  OCTET STRING as ringswitchTLSPortIfArray  
  INTEGER as ringswitchTLSPortRIP2AuthType  
  OCTET STRING as ringswitchTLSPortRIP2AuthKey SIZE(0..16)  
  INTEGER as ringswitchTLSPortOSPFEnable  
  IpAddress as ringswitchTLSPortOSPFAreaId  
  INTEGER as ringswitchTLSPortLegFlags  
  INTEGER as ringswitchTLSPortOSPFAuthType  
  INTEGER as ringswitchTLSPortOSPFAuthMD5KeyId  
  OCTET STRING as ringswitchTLSPortOSPFAuthKey SIZE(0..16)  
  INTEGER as ringswitchTLSPortOSPFCost  
  INTEGER as ringswitchTLSPortOSPFPriority  
  INTEGER as ringswitchTLSPortOSPFHelloInterval  
  INTEGER as ringswitchTLSPortOSPFDeadInterval  
  INTEGER as ringswitchTLSPortBootPFlags  

RingswitchTLSStaticRouteEntry  
SEQUENCE    
  INTEGER as ringswitchTLSStaticRouteCardNum  
  IpAddress as ringswitchTLSStaticRouteIpAddress  
  IpAddress as ringswitchTLSStaticRouteMask  
  IpAddress as ringswitchTLSStaticRouteGateway  
  INTEGER as ringswitchTLSStaticRouteMetric  

RingswitchTLSRIPNeighbourEntry  
SEQUENCE    
  INTEGER as ringswitchTLSRIPNeighbourCardNum  
  IpAddress as ringswitchTLSRIPNeighbourIpAddress  
  INTEGER as ringswitchTLSRIPNeighbourEnable  

RingswitchTLSRIPAdvertEntry  
SEQUENCE    
  INTEGER as ringswitchTLSRIPAdvertPortNum  
  IpAddress as ringswitchTLSRIPAdvertIpAddress  
  INTEGER as ringswitchTLSRIPAdvertEnable  

RingswitchTLSRIPRejectEntry  
SEQUENCE    
  INTEGER as ringswitchTLSRIPRejectPortNum  
  IpAddress as ringswitchTLSRIPRejectIpAddress  
  INTEGER as ringswitchTLSRIPRejectEnable  

RingswitchTLSOSPFAreaEntry  
SEQUENCE    
  INTEGER as ringswitchTLSOSPFAreaCardNum  
  IpAddress as ringswitchTLSOSPFAreaId  
  IpAddress as ringswitchTLSOSPFAreaAddress  
  IpAddress as ringswitchTLSOSPFAreaAddressMask  
  INTEGER as ringswitchTLSOSPFAreaFlags  

RingswitchTLSBootPRAServerEntry  
SEQUENCE    
  INTEGER as ringswitchTLSBootPRAServerCardNum  
  IpAddress as ringswitchTLSBootPRAServerIpAddress  
  OCTET STRING as ringswitchTLSBootPRAServerName SIZE(64)  
  INTEGER as ringswitchTLSBootPRAServerEnable  

RingswitchTLSVRRPVRTREntry  
SEQUENCE    
  INTEGER as ringswitchTLSVRRPVRTRPortNum  
  IpAddress as ringswitchTLSVRRPVRTRIpAddress  
  INTEGER as ringswitchTLSVRRPVRTRVRID  
  TRNMacAddress as ringswitchTLSVRRPVRTRMacAddress  
  INTEGER as ringswitchTLSVRRPVRTREnable  
  INTEGER as ringswitchTLSVRRPVRTRAdvertInterval  
  INTEGER as ringswitchTLSVRRPVRTRPriority  
  INTEGER as ringswitchTLSVRRPVRTRAuthType  
  OCTET STRING as ringswitchTLSVRRPVRTRAuthKey SIZE(8)  
  INTEGER as ringswitchTLSVRRPVRTRAdvertDeadInterval  

RingswitchEthernetIfEntry  
SEQUENCE    
  INTEGER as ringswitchEthernetIfIndex  
  INTEGER as ringswitchEthernetIfIPXEthType  
  INTEGER as ringswitchEthernetIfOperIPXEthType  
  INTEGER as ringswitchEthernetIfIPXTRType  
  INTEGER as ringswitchEthernetIfOperIPXTRType  
  INTEGER as ringswitchEthernetIfIPXEnable  
  INTEGER as ringswitchEthernetIfIPEnable  
  INTEGER as ringswitchEthernetIfAdminSpeed  
  INTEGER as ringswitchEthernetIfOperSpeed  
  INTEGER as ringswitchEthernetIfAdminDuplexMode  
  INTEGER as ringswitchEthernetIfOperDuplexMode  
  INTEGER as ringswitchEthernetIfIPMulticastType  
  INTEGER as ringswitchEthernetIfCacheClear  
  INTEGER as ringswitchEthernetIfSPTEncaps  
  INTEGER as ringswitchEthernetIfPriorityTagging  
  INTEGER as ringswitchEthernetIfPriorityTaggingVLANId  
  INTEGER as ringswitchEthernetIfAdminIPXNetwork  
  INTEGER as ringswitchEthernetIfOperIPXNetwork  
  INTEGER as ringswitchEthernetIfSTPBlockingTrapInfo  
  INTEGER as ringswitchEthernetIfAdminFlowCtrl  
  INTEGER as ringswitchEthernetIfOperFlowCtrl  
  INTEGER as ringswitchEthernetIfAutoNegotiate  
  INTEGER as ringswitchEthernetIfMediaType  
  INTEGER as ringswitchEthernetIfAdminMaxFrameSize  
  INTEGER as ringswitchEthernetIfOperMaxFrameSize  

RingswitchEthernetXBDupAddrEntry  
SEQUENCE    
  INTEGER as ringswitchEthernetXBDupAddrIfIndex  
  INTEGER as ringswitchEthernetXBDupAddrIndex  
  TRNMacAddress as ringswitchEthernetXBDupAddrMacAddress  

RingswitchEthernetXBToTRNStatsEntry  
SEQUENCE    
  INTEGER as ringswitchEthernetXBToTRNStatsIfIndex  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscSptEncapsBlock  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscFilter  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscBPDU  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscBPDUEncaps  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscTag8021qCfi  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscTag8021qVlan  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscBadRif  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscHopLimit  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscDuplicateRin  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscIPDisabled  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscARPDisabled  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscNCPCache  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscIPXDisabled  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscIPXTypeSnap  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscIPXType8022  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscIPXType8023  
  INTEGER48 as ringswitchEthernetXBToTRNStatsDiscIPXTypeDix  
  INTEGER48 as ringswitchEthernetXBToTRNStatsNoFakeBuffer  
  INTEGER48 as ringswitchEthernetXBToTRNStatsCacheFull  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdIPFrames  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdIPMulticast  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdARPFrames  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdIPXFrames  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdAARPPh1Frames  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdAARPPh2Frames  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdOtherEthFrames  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdZeroOUIFrames  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdOtherDLCFrames  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdBPDUEncaps  
  INTEGER48 as ringswitchEthernetXBToTRNStatsFwdBPDUDecaps  

RingswitchEthernetXBFromTRNStatsEntry  
SEQUENCE    
  INTEGER as ringswitchEthernetXBFromTRNStatsIfIndex  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscTooBig  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscSptEncapsBlock  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscFilter  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscBPDU  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscBPDUEncaps  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscTag8021qCfi  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscTag8021qVlan  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscBadRIF  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscZeroRingNum  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscNonTermRIF  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscIPDisabled  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscARPDisabled  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscIPCantFrag  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscNCPCache  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscIPXDisabled  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscIPXTypeSnap  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsDiscIPXType8022  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsCacheFull  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsRIFCacheFull  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdIPFrames  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdIPFragmented  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdIPMulticast  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdARPFrames  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdIPXFrames  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdAARPPh1Frames  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdAARPPh2Frames  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdTunnel8021hFrames  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdZeroOUISnapFrames  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdOtherDLCFrames  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdBPDUDecaps  
  INTEGER48 as ringswitchEthernetXBFromTRNStatsFwdBPDUEncaps  

RingswitchEthernetExtPhysStatsEntry  
SEQUENCE    
  INTEGER as ringswitchEthernetExtPhysStatsIfIndex  
  INTEGER as ringswitchEthernetExtPhysStatsRxDataErrors  
  INTEGER as ringswitchEthernetExtPhysStatsRxSequenceErrors  
  INTEGER as ringswitchEthernetExtPhysStatsRxCarrierExtErrors  
  INTEGER as ringswitchEthernetExtPhysStatsXonRxFrames  
  INTEGER as ringswitchEthernetExtPhysStatsXonTxFrames  
  INTEGER as ringswitchEthernetExtPhysStatsXoffRxFrames  
  INTEGER as ringswitchEthernetExtPhysStatsXoffTxFrames  

RingswitchPSUEntry  
SEQUENCE    
  INTEGER as ringswitchPSUIndex  
  DisplayString as ringswitchPSUDescription  
  INTEGER as ringswitchPSUStatus  

RingswitchFanEntry  
SEQUENCE    
  INTEGER as ringswitchFanIndex  
  DisplayString as ringswitchFanDescription  
  INTEGER as ringswitchFanSpeed  

RingswitchFilterEntry  
SEQUENCE    
  INTEGER as ringswitchFilterIndex  
  RingswitchRowStatus as ringswitchFilterStatus  
  DisplayString as ringswitchFilterName  
  OCTET STRING as ringswitchFilterData  
  INTEGER as ringswitchFilterExceptionType  
  INTEGER as ringswitchFilterType  
  INTEGER as ringswitchFilterForwardType  

RingswitchFilterMatrixEntry  
SEQUENCE    
  INTEGER as ringswitchFilterMatrixIndex  
  INTEGER as ringswitchFilterMatrixRowIndex  
  OCTET STRING as ringswitchFilterMatrixData