MDM-MIB

File: MDM-MIB.mib (170132 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises experimental IpAddress
TimeTicks Gauge Counter
DisplayString OBJECT-TYPE

Defined Objects

usr 1.3.6.1.4.1.429
OBJECT IDENTIFIER    

nas 1.3.6.1.4.1.429.1
OBJECT IDENTIFIER    

mdm 1.3.6.1.4.1.429.1.6
OBJECT IDENTIFIER    

mdmID 1.3.6.1.4.1.429.1.6.1
OBJECT IDENTIFIER    

mdmIDTable 1.3.6.1.4.1.429.1.6.1.1
A list of modem ID entries.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmIDEntry

mdmIDEntry 1.3.6.1.4.1.429.1.6.1.1.1
An Identification table entry, containing objects which define the identity and capabilities of a modem.
OBJECT-TYPE    
  MdmIDEntry  

mdmIDIndex 1.3.6.1.4.1.429.1.6.1.1.1.1
A unique value for each modem configured in the system based on the values in the entity table in the USR extensions to the chassis mib.
OBJECT-TYPE    
  INTEGER  

mdmIDModel 1.3.6.1.4.1.429.1.6.1.1.1.2
Defines the model (ie. V.23, HST, etc.) of the modem represented by this row in the table.
OBJECT-TYPE    
  INTEGER unknown(1), v32bisDualStandard(2), hst(3), v32bis(4), v32terboDualStandard(11), v32terbo(12), v32terboFax(13), v34DualStandard(14), v34(15), v34Fax(16), v34FaxISDN(30), x2(31), hdm24Channel(32), hdm30Channel(33), cdma(39)  

mdmIDCountry 1.3.6.1.4.1.429.1.6.1.1.1.3
This object identifies the country or countries that this modem is designed for use in.
OBJECT-TYPE    
  INTEGER unknown(1), northamerica(2), japan(3), finland(4), sweden(5), uk(6), norway(7), switzerland(8), netherlands(9), southAfrica(10), italy(11), newZealand(12), czech(13), belgium(14), denmark(15), australia(16), france(17), germany(18), ccitt(19), austria(20), ireland(21), spain(22), portugal(23), malaysia(24)  

mdmIDHardwareSerNum 1.3.6.1.4.1.429.1.6.1.1.1.4
The modem's hardware serial number as stored in EEPROM.
OBJECT-TYPE    
  DisplayString SIZE(0..16)  

mdmIDHardwareRev 1.3.6.1.4.1.429.1.6.1.1.1.5
The hardware revision of the modem as stored in the modem's EEPROM.
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

mdmIDSupervisorSwRev 1.3.6.1.4.1.429.1.6.1.1.1.6
The revision of the software being executed by the modem's supervisor processor.
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

mdmIDDataPumpSwRev 1.3.6.1.4.1.429.1.6.1.1.1.7
The revision of software being executed by the modem's data pump processor.
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

mdmIDIoProcessorSwRev 1.3.6.1.4.1.429.1.6.1.1.1.8
The revison of software being executed by the modem's IO Control Processor.
OBJECT-TYPE    
  DisplayString SIZE(0..11)  

mdmIDSupervisorDate 1.3.6.1.4.1.429.1.6.1.1.1.9
The supervisor build date.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

mdmLi 1.3.6.1.4.1.429.1.6.2
OBJECT IDENTIFIER    

mdmLiTable 1.3.6.1.4.1.429.1.6.2.1
A list of configurable Line Interface objects for a modem. The number of table entries is given by modemNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmLiEntry

mdmLiEntry 1.3.6.1.4.1.429.1.6.2.1.1
Objects which define the line interface characteristics for a particualar modem.
OBJECT-TYPE    
  MdmLiEntry  

mdmLiIndex 1.3.6.1.4.1.429.1.6.2.1.1.1
Index into the Line Interface table. This index is the value from the chassis mib entity relation table that is applicable for a particular modem.
OBJECT-TYPE    
  INTEGER  

mdmLiDialPause 1.3.6.1.4.1.429.1.6.2.1.1.2
Duration in seconds for the pause(') option in the dial command and the pause between command re-executions(> and A>) Default = 2. Equates to the modem's S8 register.
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiCarrierRecDelay 1.3.6.1.4.1.429.1.6.2.1.1.3
Duration in 10ths of a second that the remote modem's carrier signal must be present before recognition. Ignored at speeds above 2400. Equates to the modem's S9 register. Default=6.
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiCarrierLoss 1.3.6.1.4.1.429.1.6.2.1.1.4
Duration in 10ths of a second the modem waits after loss of carrier before hanging up. This allows the modem to distinguish between a momentary lapse in line quality and a true disconnect. When equal to 255 the modem will remain off hook until DTR drops or an ATH command is recieved. Equates to the modem's S10 register. Default=7.
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiToneDialTiming 1.3.6.1.4.1.429.1.6.2.1.1.5
Duration and spacing in milliseconds of dialed Touch Tones. Equates to the modem's S10 register. Default=70.
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiDteRxDataDelay 1.3.6.1.4.1.429.1.6.2.1.1.6
Duration in 10ths of a second that the modem inserts a RX transmission delay between CD and the first recieved character. Intended for custom applications and not recomended for general usage. Equates to the modem's S35 register. Default=0.
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiTransmiter 1.3.6.1.4.1.429.1.6.2.1.1.7
Enables the modem to transmit data. Corresponds to the modem 'C' register. Default=2.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmLiDialMode 1.3.6.1.4.1.429.1.6.2.1.1.8
Determines whether the modem uses pulse or tone for dialing when initiating outgoing calls. Equates to the P and T registers in the modem. Default=0.
OBJECT-TYPE    
  INTEGER pulse(1), tone(2)  

mdmLiGuardTone 1.3.6.1.4.1.429.1.6.2.1.1.9
This object is required for modems answering calls that originate from sites outside of North America. The modem's must be operating in either 1200 or 2400 bps and be using the V.32 answer sequence. This object defines what guard tone is used for answering calls. This object equates to the &G register in US Robotics modems. Default=none.
OBJECT-TYPE    
  INTEGER none(1), european550(2), uk1800(3)  

mdmLiLeasedLine 1.3.6.1.4.1.429.1.6.2.1.1.10
Enables modem to operate in leased line mode. When enabled the local an remote modems make a continuous connection without dialing. Should the connection be broken the modem's will attempt to automaticly reestablish it(see mdmCcLeasedLineRest). Equates to the modem's &L register Default = disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2), cellularHSTMode(3)  

mdmLiLeasedLineRestDelay 1.3.6.1.4.1.429.1.6.2.1.1.11
Sets the duration, in seconds, of the delay between when the modem senses loss of carrier and when it attempts to reestablish a leased line connection. The default setting of 15 should be appropriate for most installations.
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiPulseMakeBreak 1.3.6.1.4.1.429.1.6.2.1.1.12
Determines the ratio of off hook to on hook interval for Pulse dialing. Equates to the modem's &P register. Default=North America.
OBJECT-TYPE    
  INTEGER northAmerica(1), britishCommonwealth(2)  

mdmLiAnswerTone 1.3.6.1.4.1.429.1.6.2.1.1.13
Disables the 2100 Hz Answer tone allowing V.42 modems to connect more quickly and/or eliminating problems with older 2400-bps modems that do not recognise this tone. Equates to the modem's S27.3 register. Default=Enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmLiRemoteEscGuardTime 1.3.6.1.4.1.429.1.6.2.1.1.14
Sets the duration in 20 millisecond increments of the guard time that the modem requires preceding and following the remote escape sequence. The default is 200 or 4 seconds.
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiRemoteEscChar 1.3.6.1.4.1.429.1.6.2.1.1.15
Specifies the decimal value of the character used in the remote access escape code for entering online command mode on this modem from the remote site. Default = 126(~).
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiRemAccessLimit 1.3.6.1.4.1.429.1.6.2.1.1.16
Determines the number of attempts to enter remote online command mode that are allowed for any one connection. The default is 0 which disables the remote access functon.
OBJECT-TYPE    
  INTEGER 0..255  

mdmLiRemPassword0 1.3.6.1.4.1.429.1.6.2.1.1.17
The password that allows a dial-in user to gain view only access to this modems parameters. A maximum of 8 characters is allowed.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

mdmLiRemPassword1 1.3.6.1.4.1.429.1.6.2.1.1.18
The password used by a dial-in user to gain read-write access to this modems configuration. Maximum length is 8 characters.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

mdmLiTransmitLevel 1.3.6.1.4.1.429.1.6.2.1.1.19
Specifies the signal level of the modem transmitter in negative db.
OBJECT-TYPE    
  INTEGER 0..20  

mdmLiSrc 1.3.6.1.4.1.429.1.6.2.1.1.20
Specifies either NIC or TDM as the source for the line interface.
OBJECT-TYPE    
  INTEGER nic(1), t1Tdm(2), priTdm(3)  

mdmDc 1.3.6.1.4.1.429.1.6.3
OBJECT IDENTIFIER    

mdmDcTable 1.3.6.1.4.1.429.1.6.3.1
A table of configurable objects that define the operation of Data Compression in the modem.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmDcEntry

mdmDcEntry 1.3.6.1.4.1.429.1.6.3.1.1
Objects which define Data Compression operation for a modem.
OBJECT-TYPE    
  MdmDcEntry  

mdmDcIndex 1.3.6.1.4.1.429.1.6.3.1.1.1
The index into the Data Compression table. This object contains the unique value for this modem as defined in the chassis mib entity relation table.
OBJECT-TYPE    
  INTEGER  

mdmDcDataCompression 1.3.6.1.4.1.429.1.6.3.1.1.2
Determines when and how data compression is enabled. Corresponds to the &K register in USR modems.
OBJECT-TYPE    
  INTEGER none(1), autoEnable(2), enable(3), mnpWoCompression(4)  

mdmTf 1.3.6.1.4.1.429.1.6.4
OBJECT IDENTIFIER    

mdmTfTable 1.3.6.1.4.1.429.1.6.4.1
Table of test functions for modems. There is a table entry for each modem the quantity of which is specified by modemNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmTfEntry

mdmTfEntry 1.3.6.1.4.1.429.1.6.4.1.1
Objects used to request thet the modem perform certain diagnostic tests.
OBJECT-TYPE    
  MdmTfEntry  

mdmTfIndex 1.3.6.1.4.1.429.1.6.4.1.1.1
A unique value used to identify this modem the value of which is determined by the entity table in the chassis mib and used as a method to index into the test function table.
OBJECT-TYPE    
  INTEGER  

mdmTfTest 1.3.6.1.4.1.429.1.6.4.1.1.2
Equates to modem's S16 register.
OBJECT-TYPE    
  INTEGER 0..255  

mdmTfTestTime 1.3.6.1.4.1.429.1.6.4.1.1.3
Duration in seconds that the tests specified by mdmTfTestControl are to execute. Default=0(indefinate).
OBJECT-TYPE    
  INTEGER 0..255  

mdmTfV54 1.3.6.1.4.1.429.1.6.4.1.1.4
Corresponds to modem's &T register and provides tests specified by V.54. Default=normal.
OBJECT-TYPE    
  INTEGER 0..255  

mdmTfV54Errors 1.3.6.1.4.1.429.1.6.4.1.1.5
The number of errors occurring during the last V54 loopback test.
OBJECT-TYPE    
  INTEGER  

mdmTfATG 1.3.6.1.4.1.429.1.6.4.1.1.6
ATG data from the modem
OBJECT-TYPE    
  OCTET STRING SIZE(0..32)  

mdmTfDialInToneTest 1.3.6.1.4.1.429.1.6.4.1.1.7
This object is used to enable Dial in Tone Tests.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmTfToneTestCallRef 1.3.6.1.4.1.429.1.6.4.1.1.8
This object is used to send the call reference info with the tone test.
OBJECT-TYPE    
  OCTET STRING SIZE(0..53)  

mdmTfToneTable 1.3.6.1.4.1.429.1.6.4.2
Table for modem tone tests
OBJECT-TYPE    
  SEQUENCE OF  
    MdmTfToneEntry

mdmTfToneEntry 1.3.6.1.4.1.429.1.6.4.2.1
Objects for modem tone tests
OBJECT-TYPE    
  MdmTfToneEntry  

mdmTfToneIndex 1.3.6.1.4.1.429.1.6.4.2.1.1
A value used to ID this modem
OBJECT-TYPE    
  INTEGER  

mdmTfTxFreq 1.3.6.1.4.1.429.1.6.4.2.1.2
Modem tone test TX frequency
OBJECT-TYPE    
  INTEGER 300..4000  

mdmTfTxAmpl 1.3.6.1.4.1.429.1.6.4.2.1.3
Modem tone test TX amplitude
OBJECT-TYPE    
  INTEGER -40..0  

mdmTfRxFreq 1.3.6.1.4.1.429.1.6.4.2.1.4
Modem tone test RX frequency
OBJECT-TYPE    
  INTEGER 0..5000  

mdmTfRxAmpl 1.3.6.1.4.1.429.1.6.4.2.1.5
Modem tone test RX amplitude
OBJECT-TYPE    
  INTEGER  

mdmTfRspndrTable 1.3.6.1.4.1.429.1.6.4.3
Table for 105/102 responder test results.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmTfRspndrEntry

mdmTfRspndrEntry 1.3.6.1.4.1.429.1.6.4.3.1
Objects containing the 105/102 responder test result dB levels and test status values.
OBJECT-TYPE    
  MdmTfRspndrEntry  

mdmTfRspndrIndex 1.3.6.1.4.1.429.1.6.4.3.1.1
A value used to ID this modem.
OBJECT-TYPE    
  INTEGER  

mdmTf404FarNearLvl 1.3.6.1.4.1.429.1.6.4.3.1.2
404 Hz tone at -16 dB loss test level. Far to near. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTf404NearFarLvl 1.3.6.1.4.1.429.1.6.4.3.1.3
404 Hz tone at -16 dB loss test level. Near to far. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTf1004FarNearLvl 1.3.6.1.4.1.429.1.6.4.3.1.4
1004 Hz tone at -16 dB loss test level. Far to near. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTf1004NearFarLvl 1.3.6.1.4.1.429.1.6.4.3.1.5
1004 Hz tone at -16 dB loss test level. Near to far. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTf2804FarNearLvl 1.3.6.1.4.1.429.1.6.4.3.1.6
2804 Hz tone at -16 dB loss test level. Far to near. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTf2804NearFarLvl 1.3.6.1.4.1.429.1.6.4.3.1.7
2804 Hz tone at -16 dB loss test level. Near to far. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTfCmsgFarNearLvl 1.3.6.1.4.1.429.1.6.4.3.1.8
C-message test level. Far to near. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTfCmsgNearFarLvl 1.3.6.1.4.1.429.1.6.4.3.1.9
C-message test level. Near to far. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTfCnotchFarNearLvl 1.3.6.1.4.1.429.1.6.4.3.1.10
C-notch test level. Far to near. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTfCnotchNearFarLvl 1.3.6.1.4.1.429.1.6.4.3.1.11
C-notch test level. Near to far. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmtTfSigNoiseFarNearLvl 1.3.6.1.4.1.429.1.6.4.3.1.12
Signal to noise ratio level. Far to near. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmtTfSigNoiseNearFarLvl 1.3.6.1.4.1.429.1.6.4.3.1.13
Signal to noise ratio level. Near to far. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTf404FarNearSts 1.3.6.1.4.1.429.1.6.4.3.1.14
404 Hz tone at -16 dB loss test status. Far to near. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTf404NearFarSts 1.3.6.1.4.1.429.1.6.4.3.1.15
404 Hz tone at -16 db loss test status. Near to far. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTf1004FarNearSts 1.3.6.1.4.1.429.1.6.4.3.1.16
1004 Hz tone at -16 dB loss test status. Far to near. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTf1004NearFarSts 1.3.6.1.4.1.429.1.6.4.3.1.17
1004 Hz tone at -16 dB loss test status. Near to far. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTf2804FarNearSts 1.3.6.1.4.1.429.1.6.4.3.1.18
2804 Hz tone at -16 dB loss test status. Far to near. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTf2804NearFarSts 1.3.6.1.4.1.429.1.6.4.3.1.19
2804 Hz tone at -16 dB loss test status. Near to far. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTfCmsgFarNearSts 1.3.6.1.4.1.429.1.6.4.3.1.20
C-message test status. Far to near. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTfCmsgNearFarSts 1.3.6.1.4.1.429.1.6.4.3.1.21
C-message test status. Near to far. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTfCnotchFarNearSts 1.3.6.1.4.1.429.1.6.4.3.1.22
C-notch test status. Far to near. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTfCnotchNearFarSts 1.3.6.1.4.1.429.1.6.4.3.1.23
C-notch test status. Near to far. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTfSigNoiseFarNearSts 1.3.6.1.4.1.429.1.6.4.3.1.24
Signal to noise ratio status. Far to near. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTfSigNoiseNearFarSts 1.3.6.1.4.1.429.1.6.4.3.1.25
Signal to noise ratio status. Near to far. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTf0dB1004FarNearLvl 1.3.6.1.4.1.429.1.6.4.3.1.26
1004 Hz tone at 0 db loss test level. Far to near. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTf0dB1004NearFarLvl 1.3.6.1.4.1.429.1.6.4.3.1.27
1004 Hz tone at 0 db loss test level. Near to far. Level in 0.1 dB resolution.
OBJECT-TYPE    
  INTEGER  

mdmTf0dB1004FarNearSts 1.3.6.1.4.1.429.1.6.4.3.1.28
1004 Hz tone at 0 db loss test status. Far to near. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmTf0dB1004NearFarSts 1.3.6.1.4.1.429.1.6.4.3.1.29
1004 Hz tone at 0 db loss test status. Near to Far. Default=noTest(1).
OBJECT-TYPE    
  INTEGER noTest(1), success(2), noResponder(3), unsupported(4), timeOut(5), noToneDetected(6)  

mdmDi 1.3.6.1.4.1.429.1.6.5
OBJECT IDENTIFIER    

mdmDiTable 1.3.6.1.4.1.429.1.6.5.1
Table of DTE interface objects. The number of table entries is specified by modemNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmDiEntry

mdmDiEntry 1.3.6.1.4.1.429.1.6.5.1.1
Objects that define the DTE interface for a modem.
OBJECT-TYPE    
  MdmDiEntry  

mdmDiIndex 1.3.6.1.4.1.429.1.6.5.1.1.1
The index for the DTE interface table contains the unique value associated with this modem as defined in the chassis mib entity table.
OBJECT-TYPE    
  INTEGER  

mdmDiEscCodeGuardTime 1.3.6.1.4.1.429.1.6.5.1.1.2
Duration in 50ths of a second of idle time that must precede and follow the modem's command mode escape code. Default=50.
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiLocalEscChar 1.3.6.1.4.1.429.1.6.5.1.1.3
Decimal equivalent of the character that is used to escape to on-line command mode. Values between 128 and 255 disable the escape code. Default=43(+).
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiCarriageRetChar 1.3.6.1.4.1.429.1.6.5.1.1.4
Specifies the decimal equivalent of the carriage return character. Default=13.
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiLineFeedChar 1.3.6.1.4.1.429.1.6.5.1.1.5
Specifies the decimal equivalent of the line feed character. Default=10.
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiBackspaceChar 1.3.6.1.4.1.429.1.6.5.1.1.6
Specifies the decimal equivalent of the backspace character. Default=8.
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiDelAsBackspace 1.3.6.1.4.1.429.1.6.5.1.1.7
Defines functionality of the delete key. Acts either to delete the character the cursor is currently on or acts the same as the backspace key. Default=delete.
OBJECT-TYPE    
  INTEGER delete(1), backspace(2)  

mdmDiResetOnDtrEna 1.3.6.1.4.1.429.1.6.5.1.1.8
When enabled, this option will cause the modem to restart when the DTR control signal drops. Default=disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmDiResultCodePauseDis 1.3.6.1.4.1.429.1.6.5.1.1.9
When enabled, the modem pauses 250ms before transmission of any result code. Default=enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmDiInterbridgeEna 1.3.6.1.4.1.429.1.6.5.1.1.10
When enabled, the modem operates in a mode that is compatible with an 'Appletalk InterBridge Network'. Default=disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmDiBreakLen 1.3.6.1.4.1.429.1.6.5.1.1.11
Defines the duration of break characters that are sent to the DTE in ARQ mode. Defined in 10ms increments. Default=10(100ms).
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiXonChar 1.3.6.1.4.1.429.1.6.5.1.1.12
Defines the decimal equivalent of the Xon character. This character will be used when software flow control is enabled. Default=17.
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiXoffChar 1.3.6.1.4.1.429.1.6.5.1.1.13
Defines the decimal equivalent of the xoff character. This character will be used when software flow control is enabled. Default=19.
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiDsrPulseTime 1.3.6.1.4.1.429.1.6.5.1.1.14
Duration in 20 millisecond increments that the DSR signal is pulsed when the modem is configured for pulsed DSR mode. Default=150.
OBJECT-TYPE    
  INTEGER 0..150  

mdmDiRtsCtsDelay 1.3.6.1.4.1.429.1.6.5.1.1.15
Duration in 10 millisecond increments that the modem delays setting CTS after detecting the presence of RTS. Default=1.
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiHiSpeedResCodeEna 1.3.6.1.4.1.429.1.6.5.1.1.16
Determines if connection establishment result codes above 9600 are sent to the DTE. Default=enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmDiCmdLocalEchoEna 1.3.6.1.4.1.429.1.6.5.1.1.17
Defines whether or not the characters transmitted by the DTE are echoed back when in command mode. Default=disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmDiDataModeEchoEna 1.3.6.1.4.1.429.1.6.5.1.1.18
Defines whether or not the DTE's transmitted data is echoed back durring a connection(half duplex). Default=disabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmDiDteDataRateMode 1.3.6.1.4.1.429.1.6.5.1.1.19
Defines how the modem determines the DTE data rate. When set to the default, follows link rate, the modem switches the DTE speed to match the link rate. When set to fixed, the DTE speed remains at the default DTE data rate or the rate of the last AT command. When set to ARQ fixed-Non ARQ follows the dte speed remains fixed for ARQ calls and follows the link rate for non ARQ calls.
OBJECT-TYPE    
  INTEGER followsLinkRate(1), fixed(2), arqFixedNonArqFollows(3)  

mdmDiCdOverride 1.3.6.1.4.1.429.1.6.5.1.1.20
Defines the operation of the CD(Carrier Detect) signal. When overridden the CD signal is always asserted. Default=normal.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmDiDtrOverride 1.3.6.1.4.1.429.1.6.5.1.1.21
Defines operation with regard to DTR. When overridden the DTR signal is always assumed to be present. Default=normal.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmDiDsrOverride 1.3.6.1.4.1.429.1.6.5.1.1.22
Determines the functionality of the modem's DSR signal. Default=Override.
OBJECT-TYPE    
  INTEGER dsrOveridden(1), modemControled(2), pulsedCtsFollowsCd(3), pulsed(4), dsrEqualsCd(5), normalCtsFollowsCd(6)  

mdmDiEiaLineStatus 1.3.6.1.4.1.429.1.6.5.1.1.23
Provides a mechanism for the console to determine the current state of the DTE's EIA signals.
OBJECT-TYPE    
  INTEGER 0..255  

mdmDiTransmitFlowCntl 1.3.6.1.4.1.429.1.6.5.1.1.24
Determines if transmit flow control is enabled and if so whether it is hardware or software. Default=none.
OBJECT-TYPE    
  INTEGER none(1), hardware(2), software(3), hardwareAndSoftware(4)  

mdmDiSoftwareRxFlowCntl 1.3.6.1.4.1.429.1.6.5.1.1.25
Determines if receive software flow control is enabled as well as what type. Default=none.
OBJECT-TYPE    
  INTEGER none(1), xonXoffLocalRemote(2), xonXoffLocal(3), hpHostMode(4), hpTerminalMode(5), localIncommingXonXoff(6)  

mdmDiHardwareRxFlowCntl 1.3.6.1.4.1.429.1.6.5.1.1.26
Determines if receive hardware flow control is enabled as well as how it is implemented. Default=RTS ignored.
OBJECT-TYPE    
  INTEGER rtsCtsDelayed(1), rtsIgnored(2), dataOnRtsHigh(3)  

mdmDiBreakHandling 1.3.6.1.4.1.429.1.6.5.1.1.27
Defines the method used to handle received breaks. When defined as destructive the modem's transmit data buffer is flushed. When defined as expidited, the break preceeds any pending data in the transmit buffer. Default=Destructive,Expidited.
OBJECT-TYPE    
  INTEGER destructiveNotSent(1), destructiveExpedited(2), nondestructiveExpedited(3), nondestructiveNotSent(4)  

mdmDiDteNvramLock 1.3.6.1.4.1.429.1.6.5.1.1.28
When locked, prohibits the DTE user from changing any of the NVRAM settings in the modem. Default=unlocked.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmDiSerialFormat 1.3.6.1.4.1.429.1.6.5.1.1.29
Defines the data bits and parity of the modem's DTE. Used in situations where the attached DTE is unable to send AT commands to initialize the DTE format. Default=8 bit no parity.
OBJECT-TYPE    
  INTEGER bit8NoParity(1), bit7EvenParity(2), bit7OddParity(3), bit7MarkParity(4)  

mdmDiDefaultDteDataRate 1.3.6.1.4.1.429.1.6.5.1.1.30
Defines the data rate of the DTE. Useful in those cases where the DTE is incapable of sending an AT command to initialize the data rate and a fixed data rate is required. Default=9600.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps9600(8), bps19K(12), bps38K(13), unknown(16), bps57K(17), bps115K(22)  

mdmDiRemAccessMsg 1.3.6.1.4.1.429.1.6.5.1.1.31
Specifies if the modem is to send the 'Modem Unavailable' message to the DTE when the DTE attempts to send data to a modem that is curently in command mode with a remote DTE. Default = enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmDiV25DteDataRate 1.3.6.1.4.1.429.1.6.5.1.1.32
Defines the DTE Data Rates supported for V25 bis.
OBJECT-TYPE    
  INTEGER bps1200(1), bps2400(2), bps4800(3), bps7200(4), bps9600(5), bps12K(6), bps14K(7), bps16K(8), bps19K(9), bps21K(10), bps24K(11), bps26K(12), bps28K(13)  

mdmDiSrc 1.3.6.1.4.1.429.1.6.5.1.1.33
Specifies either NIC or Packet Bus as the source for the DTE interface.
OBJECT-TYPE    
  INTEGER nic(1), packetBus(2)  

mdmDiSlot 1.3.6.1.4.1.429.1.6.5.1.1.34
Specifies the slot address as the DTE interface source when mdmdiSrc is configured for Packet Bus.
OBJECT-TYPE    
  INTEGER 1..16  

mdmDiBusyClock 1.3.6.1.4.1.429.1.6.5.1.1.35
specifies whether the modem will support either the current transmit clock or a new busy out.
OBJECT-TYPE    
  INTEGER extClock1(1), busyOut(2)  

mdmDiAtString 1.3.6.1.4.1.429.1.6.5.1.1.36
Provides an interface for issuing an AT command to the modem. Not implemented as a command so as to allow the object to be saved to NVRAM and subsequently configured during power-up.
OBJECT-TYPE    
  DisplayString SIZE(0..41)  

mdmDiDtrRecognitionTime 1.3.6.1.4.1.429.1.6.5.1.1.37
S25 register tells the modem how quickly to react when DTR transitions from off to on. Default is 20. Increments are in 10 ms.
OBJECT-TYPE    
  INTEGER 0..255  

mdmSc 1.3.6.1.4.1.429.1.6.6
OBJECT IDENTIFIER    

mdmScTable 1.3.6.1.4.1.429.1.6.6.1
Table of configurable objects which determine the operation of the Signal Converter. The quantity of entries in this table is defined by modemNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmScEntry

mdmScEntry 1.3.6.1.4.1.429.1.6.6.1.1
Objects that define the operation of the modem's Signal Converter.
OBJECT-TYPE    
  MdmScEntry  

mdmScIndex 1.3.6.1.4.1.429.1.6.6.1.1.1
The unique value found in the chassis mib entity relation table that references this modem.
OBJECT-TYPE    
  INTEGER  

mdmScLinkRateSelect 1.3.6.1.4.1.429.1.6.6.1.1.2
Determines if the link will run at a fixed or variable data rate. Default=variable.
OBJECT-TYPE    
  INTEGER variable(1), bps300(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), bps33333(18), bps37333(19), bps41333(20), bps42666(21), bps44000(22), bps45333(23), bps46666(24), bps48000(25), bps49333(26), bps50666(27), bps52000(28), bps53333(29), bps54666(30), bps56000(31), bps57333(32), bps64000(33), bps28000(34), bps29333(35), bps30666(36), bps32000(37), bps34666(38), bps36000(39), bps38666(40), bps40000(41), bps58666(42), bps60000(43), bps61333(44), bps62666(45)  

mdmScNonArqBufSize 1.3.6.1.4.1.429.1.6.6.1.1.3
Sets the sizer of the transmit buffer for non-ARQ mode operation to either 128 bytes or 1.5K. The smaller size is for low speed interactive applications, the large size is for file transfer. Default=128.
OBJECT-TYPE    
  INTEGER bytes1500(1), bytes128(2)  

mdmScNonMnpDataCapture 1.3.6.1.4.1.429.1.6.6.1.1.4
Causes received characters to be buffered when the modem is attempting to negotiate an MNP call and the remote modem is not. Default=disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScSyncTimingSource 1.3.6.1.4.1.429.1.6.6.1.1.5
Specifies the clock source when operating in synchronous mode. Default=internal.
OBJECT-TYPE    
  INTEGER internal(1), external(2), rxLinkClock(3)  

mdmScHstMod 1.3.6.1.4.1.429.1.6.6.1.1.6
May be used to disable HST operation on USRobotics Dual Standard modems. Default=enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScHiFreqEq 1.3.6.1.4.1.429.1.6.6.1.1.7
Allows modem's high frequency equalization to be disabled if it causes problems on shorter lines. Default=enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScBackChanRate 1.3.6.1.4.1.429.1.6.6.1.1.8
Specifies the lower speed used in the asymetrical (HST) mode of operation. The 300 bps setting is provided for compatibility with early HST modems. Default=450.
OBJECT-TYPE    
  INTEGER bps450(1), bps300(2)  

mdmScV21Mod 1.3.6.1.4.1.429.1.6.6.1.1.9
When enabled, the modem will answer both bell 103 and V.21 calls but originates only V.21 calls. Default=disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScV32UnencodedMod 1.3.6.1.4.1.429.1.6.6.1.1.10
Allows unencoded modulation in V.32 mode. Although part of the CCITT V.32 recomendation it is rarely used. Default=disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScV32Mod 1.3.6.1.4.1.429.1.6.6.1.1.11
Allows V.32 modulation to be disabled on USRobotics Dual Standard modems. Default=enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScBell208 1.3.6.1.4.1.429.1.6.6.1.1.12
Allows modems that support Bell 208 modulation to include Bell 208 as part of the negotiation sequence. Default=Bell 208 disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScV32Bis 1.3.6.1.4.1.429.1.6.6.1.1.13
Allows V.32 bis modulation to be disabled. On USRobotics Dual Standard modems this may be useful in troublshooting HST operation. Default=V.32 bis enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScV32BisEnhance 1.3.6.1.4.1.429.1.6.6.1.1.14
Allows USRobotics V.32 Enahnced mode to be disabled for purposes of troubleshooting Default=enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScV32QuickRetrain 1.3.6.1.4.1.429.1.6.6.1.1.15
Allows the faster retrains that occur with USR's enhanced V.32 mode to be disabled for troubleshooting purposes. Default=enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScV23 1.3.6.1.4.1.429.1.6.6.1.1.16
Allows the modem to negotiate a V.23 connection(used in U.K.) after failing to negotiate a higher rate. Default=disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScHiSpeedModulation 1.3.6.1.4.1.429.1.6.6.1.1.17
Defines the handshaking options used in negotiation of high speed calls. Default=CCITT V.32
OBJECT-TYPE    
  INTEGER v32(1), hst(2), bell208(3)  

mdmScFallback 1.3.6.1.4.1.429.1.6.6.1.1.18
Defines whether or not the modem will be allowed to change protocols it detects a significant change in the line characteristics. If the modem is unable to maintain transmission with the current modulation technique it would fall back to a lower speed and if the line then improved it would upshift to a higher speed. Default=enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScV32TerboModeEnable 1.3.6.1.4.1.429.1.6.6.1.1.19
Allows the V32 Terbo mode to be disabled/enabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScV34ModeEnable 1.3.6.1.4.1.429.1.6.6.1.1.20
Allows V34 mode to be disabled/enabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScVFCSymRate2400 1.3.6.1.4.1.429.1.6.6.1.1.21
Allows the 2400 symbol rate to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCSymRate2743 1.3.6.1.4.1.429.1.6.6.1.1.22
Allows the 2743 symbol rate to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCSymRate2800 1.3.6.1.4.1.429.1.6.6.1.1.23
Allows the 2800 symbol rate to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCSymRate3000 1.3.6.1.4.1.429.1.6.6.1.1.24
Allows the 3000 symbol rate to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCSymRate3200 1.3.6.1.4.1.429.1.6.6.1.1.25
Allows the 3200 symbol rate to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCSymRate3429 1.3.6.1.4.1.429.1.6.6.1.1.26
Allows the 3429 symbol rate to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFC8S2DMapping 1.3.6.1.4.1.429.1.6.6.1.1.27
Allows the 8S-2D mapping to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFC16S4DMapping 1.3.6.1.4.1.429.1.6.6.1.1.28
Allows the 16S-4D mapping to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFC32S2DMapping 1.3.6.1.4.1.429.1.6.6.1.1.29
Allows the 32S-2D mapping to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFC64S4DMapping 1.3.6.1.4.1.429.1.6.6.1.1.30
Allows the 64S-4D mapping to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCNonLinearCoding 1.3.6.1.4.1.429.1.6.6.1.1.31
Allows the non-linear coding to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCTxLevelDeviation 1.3.6.1.4.1.429.1.6.6.1.1.32
Allows the TX level deviation to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCPreEmphasis 1.3.6.1.4.1.429.1.6.6.1.1.33
Allows the pre-emphasis to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCPreCoding 1.3.6.1.4.1.429.1.6.6.1.1.34
Allows the precoding to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCShaping 1.3.6.1.4.1.429.1.6.6.1.1.35
Allows the shaping to be disabled/enabled on V.FC modems.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScVFCModeEnable 1.3.6.1.4.1.429.1.6.6.1.1.36
Allows to disable/enable V.FC mode in order to troubleshoot a connection.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScV8 1.3.6.1.4.1.429.1.6.6.1.1.37
Allow V8 mode to be disabled/enabled
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmSCV8CallIndicator 1.3.6.1.4.1.429.1.6.6.1.1.38
Allow V.8. call indicater to be disabled/enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScV34pModeEnable 1.3.6.1.4.1.429.1.6.6.1.1.39
Allows V34 plus modulation mode to be disabled. (default=0/enabled)
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmSc300 1.3.6.1.4.1.429.1.6.6.1.1.40
Restrict 300 baud negotiations. Register S48.0 Default is disable (0) restriction.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmSc1200 1.3.6.1.4.1.429.1.6.6.1.1.41
Restrict 1200 baud negotiations. Register S48.1 Default is disable (0) restriction.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmSc2400 1.3.6.1.4.1.429.1.6.6.1.1.42
Restrict 2400 baud negotiations. Register S48.2 Default is disable (0) restriction.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScHighSpeed 1.3.6.1.4.1.429.1.6.6.1.1.43
Restrict highspeed baud negotiations. Register S48.3 Default is disable (0) restriction.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScSelectiveReject 1.3.6.1.4.1.429.1.6.6.1.1.44
Selective Reject register S51.6 is a function of the V.42/LAPM protocol. The default is enable (1)
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScPhExclusionDel 1.3.6.1.4.1.429.1.6.6.1.1.45
Enable/disable phone extension delay S51.7. Default is enable
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScLinkRateAmpU 1.3.6.1.4.1.429.1.6.6.1.1.46
Minimum high-speed direction link speed Default=variable.
OBJECT-TYPE    
  INTEGER variable(1), bps300(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), bps33333(18), bps37333(19), bps41333(20), bps42666(21), bps44000(22), bps45333(23), bps46666(24), bps48000(25), bps49333(26), bps50666(27), bps52000(28), bps53333(29), bps54666(30), bps56000(31), bps57333(32), bps64000(33), bps28000(34), bps29333(35), bps30666(36), bps32000(37), bps34666(38), bps36000(39), bps38666(40), bps40000(41), bps58666(42), bps60000(43), bps61333(44), bps62666(45)  

mdmScLowerSpeedMin 1.3.6.1.4.1.429.1.6.6.1.1.47
Lower speed direction minimum Default=1.
OBJECT-TYPE    
  INTEGER variable(1), bps300(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), bps33333(18), bps37333(19), bps41333(20), bps42666(21), bps44000(22), bps45333(23), bps46666(24), bps48000(25), bps49333(26), bps50666(27), bps52000(28), bps53333(29), bps54666(30), bps56000(31), bps57333(32), bps64000(33), bps28000(34), bps29333(35), bps30666(36), bps32000(37), bps34666(38), bps36000(39), bps38666(40), bps40000(41), bps58666(42), bps60000(43), bps61333(44), bps62666(45)  

mdmScLowerSpeedMax 1.3.6.1.4.1.429.1.6.6.1.1.48
Lower speed direction maximum Default=1.
OBJECT-TYPE    
  INTEGER variable(1), bps300(2), bps1200(3), bps2400(4), bps4800(5), bps7200(6), bps9600(7), bps12000(8), bps14400(9), bps16800(10), bps19200(11), bps21600(12), bps24000(13), bps26400(14), bps28800(15), bps31200(16), bps33600(17), bps33333(18), bps37333(19), bps41333(20), bps42666(21), bps44000(22), bps45333(23), bps46666(24), bps48000(25), bps49333(26), bps50666(27), bps52000(28), bps53333(29), bps54666(30), bps56000(31), bps57333(32), bps64000(33), bps28000(34), bps29333(35), bps30666(36), bps32000(37), bps34666(38), bps36000(39), bps38666(40), bps40000(41), bps58666(42), bps60000(43), bps61333(44), bps62666(45)  

mdmScX2Client 1.3.6.1.4.1.429.1.6.6.1.1.49
X2 Client Mode Disable Default=enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mdmScX2Server 1.3.6.1.4.1.429.1.6.6.1.1.50
X2 Server Mode Disable Default=enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mdmScX2Symmetric 1.3.6.1.4.1.429.1.6.6.1.1.51
X2 Symmetric Mode Disable Default=enable.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mdmScX2HighPowerConst 1.3.6.1.4.1.429.1.6.6.1.1.52
This object is used to enable/disable the X2 high-power constellation. This object is only valid in countries, where it is legal. It corresponds to S Register 76.7 Default = Disable(1).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmScPiafs 1.3.6.1.4.1.429.1.6.6.1.1.53
This object is used to enable/disable PIAFS protocol. It corresponds to S Register 72.4 Default = enable(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScPiafsV42bis 1.3.6.1.4.1.429.1.6.6.1.1.54
This object is used to enable/disable PIAFS V42bis compression protocol. It corresponds to S Register 72.5. Default = enable(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmScTxPwrLvl 1.3.6.1.4.1.429.1.6.6.1.1.55
This object configures the power level. It applies to S-register S82.
OBJECT-TYPE    
  INTEGER 0..31  

mdmScTxPwrLvlApplied 1.3.6.1.4.1.429.1.6.6.1.1.56
This object configures where the power level is applied. It applies to S-register S81.0.
OBJECT-TYPE    
  INTEGER inputToFarEndOfCodec(1), outputOfTheServerModem(2)  

mdmScX2Version2 1.3.6.1.4.1.429.1.6.6.1.1.57
This object is the x2 Version 2 Modulation. It applies to S-register S81.1
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mdmScV34Fallback 1.3.6.1.4.1.429.1.6.6.1.1.58
This object is the x2 fallback to v34. It applies to S-register S76.3
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mdmScV90Analogue 1.3.6.1.4.1.429.1.6.6.1.1.59
This object controls the enable/disable of the V.90 client modulation.Default=Enable(1).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mdmScV90Digital 1.3.6.1.4.1.429.1.6.6.1.1.60
This object controls the enable/disable of the V.90 server modulation.Default=Enable(1).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mdmScV90AllDigital 1.3.6.1.4.1.429.1.6.6.1.1.61
This object controls the enable/disable of the V.90 symmetric modulation. Default=Enable(1).
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mdmCc 1.3.6.1.4.1.429.1.6.7
OBJECT IDENTIFIER    

mdmCcTable 1.3.6.1.4.1.429.1.6.7.1
A table containing the call control parameters for each modem in the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmCcEntry

mdmCcEntry 1.3.6.1.4.1.429.1.6.7.1.1
Call control parameters for a modem. These define the sequence of operation related to how a call is negotiated.
OBJECT-TYPE    
  MdmCcEntry  

mdmCcIndex 1.3.6.1.4.1.429.1.6.7.1.1.1
The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index to the entity table in the chassis MIB that corresponds to the same modem.
OBJECT-TYPE    
  INTEGER  

mdmCcDialDelay 1.3.6.1.4.1.429.1.6.7.1.1.2
Defines the number of seconds the modem waits between going off hook and begining to dial. Ignored when result code options 2,4,6,or 7 are active. Default=2.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcWaitForCarrier 1.3.6.1.4.1.429.1.6.7.1.1.3
Defines the number of seconds the modem will wait for a carrier signal after dialing. Default=60.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcInactivityTimer 1.3.6.1.4.1.429.1.6.7.1.1.4
Sets the duration (in seconds) that the modem will maintain a connection when there is no activity on the phone line. The feature is disabled when set to 0. Default=0.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcAutoDialOnDtrEna 1.3.6.1.4.1.429.1.6.7.1.1.5
When enabled the modem will dial the number present in mdmCCPhoneString0 when the DTR signal transitions from low to high. Default=disable(1).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcAutoDialOnPwrUpEna 1.3.6.1.4.1.429.1.6.7.1.1.6
When enabled, the modem will dial the number present in mdmCcPhoneString0 on power up or after a reset. Default=disable(1).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcGhostPortLockEna 1.3.6.1.4.1.429.1.6.7.1.1.7
When enabled, the modem requires that DTR go low before it will accept another call. The modem also implements a Fast Connect mode where CD is asserted before the link negotiation is complete. Default=disable(1).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcQuietResultCodes 1.3.6.1.4.1.429.1.6.7.1.1.8
Determines whether or not the modem transmits result codes to the DTE. Default=noResult(2).
OBJECT-TYPE    
  INTEGER displayResult(1), noResult(2), originateOnly(3)  

mdmCcResponseMode 1.3.6.1.4.1.429.1.6.7.1.1.9
Determines whether the modem transmits result codes in the verbal or numeric mode. Default=verbal(2).
OBJECT-TYPE    
  INTEGER numeric(1), verbal(2)  

mdmCcResultCodeOptions 1.3.6.1.4.1.429.1.6.7.1.1.10
Defines one of eight result code subsets and also defines indirectly how the modem reacts to dial tone etc. Equates to the modem's X register Default=1.
OBJECT-TYPE    
  INTEGER 0..7  

mdmCcArqResultCodeMode 1.3.6.1.4.1.429.1.6.7.1.1.11
Defines whether or not the ARQ result codes are sent to the DTE on connection(if result codes are enabled). Default=arqResultsEnabled(2).
OBJECT-TYPE    
  INTEGER arqResultsDisabled(1), arqResultsEnabled(2), includeHstV32(3), includeProtocol(4)  

mdmCcEscCodeRsp 1.3.6.1.4.1.429.1.6.7.1.1.12
Defines the action of the modem in response to the escape code(+++). The default value is determined by the state of Dip switch 2-3 on power up.
OBJECT-TYPE    
  INTEGER goOnHook(1), enterCommandMode(2), ignoreEscCode(3)  

mdmCcAtRecognition 1.3.6.1.4.1.429.1.6.7.1.1.13
Determines which, if any, AT commands the modem will recognize or accept from the DTE. Default=ignore(1).
OBJECT-TYPE    
  INTEGER ignore(1), queryOnly(2), enableAll(3)  

mdmCcMgmtSysMsgDis 1.3.6.1.4.1.429.1.6.7.1.1.14
Determines if the modem is to send special result codes, triggered by user conflicts with the management system, to the DTE. Default=enable(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmCcV32ToneDuration 1.3.6.1.4.1.429.1.6.7.1.1.15
Specifies the duration (in 10ths of a second) that the modem transmits the 3000/600 Hz answer tones for V.32 handshaking. A setting of 0 eliminates these tones and will result in faster connect times for V.21 and V.23 calls. Default=8.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcAutoAnswer 1.3.6.1.4.1.429.1.6.7.1.1.17
Determines the number of rings that the modem will answer calls on. When set to 0 the modem can only originate calls. Default=1.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcAnswerInOrigMode 1.3.6.1.4.1.429.1.6.7.1.1.18
When enabled the modem will answer calls using the sequence normaly used by the originating modem. Default=disable(1).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcArqBufWait 1.3.6.1.4.1.429.1.6.7.1.1.19
Sets the duration (in seconds) that the modem waits on an ARQ call before clearing the transmit buffer and dropping carrier after DTR drops. This is to allow time for the remote modem to acknowledge receipt of all transmitted data. Default=0.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcPhoneString0 1.3.6.1.4.1.429.1.6.7.1.1.20
Phone number stored in modem's non volitile memory. Useful in providing quick access to frequently called numbers. In addition mdmCcPhoneString0 is used for the dial on power up and dial on DTR options.
OBJECT-TYPE    
  DisplayString SIZE(0..36)  

mdmCcPhoneString1 1.3.6.1.4.1.429.1.6.7.1.1.21
Phone number stored in the modem's non volitile memory, useful for providing quick access to frequently called numbers.
OBJECT-TYPE    
  DisplayString SIZE(0..36)  

mdmCcPhoneString2 1.3.6.1.4.1.429.1.6.7.1.1.22
Phone number stored in the modem's non volitile memory, useful in providing quick access to frequently called numbers.
OBJECT-TYPE    
  DisplayString SIZE(0..36)  

mdmCcPhoneString3 1.3.6.1.4.1.429.1.6.7.1.1.23
Phone number stored in the modem's non volitile memory, useful in providing quick access to frequently called numbers.
OBJECT-TYPE    
  DisplayString SIZE(0..36)  

mdmCcErrorCntlMode 1.3.6.1.4.1.429.1.6.7.1.1.24
Defines if the modem is operating in synchronous or asynchronous mode and how it responds relative to negotiation of error control on asynchronous connections. When set to the default, normalArq(3), the modem attempts to connect with error control but if unable to negotiate it connects anyway. When set to none(1), async connections do not attempt to use error control. When set to arqOnly(4), the modem will hang up if unable to negotiate error contol. When set to syncMode(2), the modem will not connect asynchronously.
OBJECT-TYPE    
  INTEGER none(1), syncMode(2), normalArq(3), arqOnly(4), v25bisChar(5), v25bisBit(6)  

mdmCcMiMic 1.3.6.1.4.1.429.1.6.7.1.1.25
Specifies whether the modem will recognize MI/MIC closure as the mechanism for detecting incomming calls. Default=disable(1).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcMnpWith1200 1.3.6.1.4.1.429.1.6.7.1.1.26
Determines if the modem will include MNP/V42 negotiation on 1200 bps connections. Default=enable(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmCcMnpWith2400 1.3.6.1.4.1.429.1.6.7.1.1.27
Determines if the modem will include MNP/V43 negotiation on 2400 bps calls. default=enable(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmCcMnpWithV32 1.3.6.1.4.1.429.1.6.7.1.1.28
Determines if the modem will include MNP/V42 negotiation on V.32 connections. Default=enable(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmCcMnpTimeout 1.3.6.1.4.1.429.1.6.7.1.1.29
Specifies the MNP/V42 link request timeout for negotiation of 1200 and 2400 bps calls. Default=5.
OBJECT-TYPE    
  INTEGER 0..14  

mdmCcV21V23FallBackTimer 1.3.6.1.4.1.429.1.6.7.1.1.30
V21/V23 fallback timer, 1/10 sec. NVRAM S Register S29. Default=20
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcAddnlAnswToneDur 1.3.6.1.4.1.429.1.6.7.1.1.31
Additional answer tone duration, 1/10 sec. NVRAM S Register S49. Default=16.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcBillingDelayPeriod 1.3.6.1.4.1.429.1.6.7.1.1.32
Billing Delay Period. 1/50 sec. NVRAM S Register S50. Default=100.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcCarrierAccessCode1 1.3.6.1.4.1.429.1.6.7.1.1.33
The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits (e.g. 9501755). This is the 1st of 3 CACs.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

mdmCcCarrierAccessCode2 1.3.6.1.4.1.429.1.6.7.1.1.34
The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits. This is the 2nd of 3 CACs.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

mdmCcCarrierAccessCode3 1.3.6.1.4.1.429.1.6.7.1.1.35
The DNIS Carrier Access Code (CAC) Number. This is a string which contains a number from 1 to 10 digits. This is the 3rd of 3 CACs.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

mdmCcCallingInitStr1 1.3.6.1.4.1.429.1.6.7.1.1.36
This is the Carrier Access Code (CAC) initialization string. This string is a configuration string of 1 to 30 characters (e.g. &F, &F&B1&R1, etc.) This string does NOT include the AT attention prefix. This is the 1st of 4 CAC init strings.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mdmCcCallingInitStr2 1.3.6.1.4.1.429.1.6.7.1.1.37
This is the Carrier Access Code (CAC) initialization string. This string is 1 to 30 characters. It does NOT include the AT attention prefix. It is the 2nd of 4 CAC init strings.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mdmCcCallingInitStr3 1.3.6.1.4.1.429.1.6.7.1.1.38
This is the Carrier Access Code (CAC) initialization string. This is a string of 1 to 30 characters. It does NOT include the AT attention prefix. This is the 3rd of 4 CAC init strings.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mdmCcCallingInitStr4 1.3.6.1.4.1.429.1.6.7.1.1.39
This is the Carrier Access Code (CAC) initialization string. This is a string of 1 to 30 characters. It does NOT include the AT attention prefix. This is the 4th of 4 CAC init strings.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mdmCcDataFaxMode 1.3.6.1.4.1.429.1.6.7.1.1.40
Gives the current Data/FAX mode of the modem.
OBJECT-TYPE    
  INTEGER dataMode(1), faxClass1Mode(2), dataFaxClass1Mode(3), faxClass2Mode(4), dataFaxClass2Mode(5)  

mdmCcT1CallSetupProc 1.3.6.1.4.1.429.1.6.7.1.1.41
Determines T1 call setup procedures used. Choices are 'normal' or 'none'. None assumes a dedicated (leased) DS0 assigned to the modem. Default=normalSetup(1).
OBJECT-TYPE    
  INTEGER normalSetup(1), noSetup(2)  

mdmCcT1DialToneType 1.3.6.1.4.1.429.1.6.7.1.1.42
Determines if MF or DTMF tones are used for T1 signaling. Default = mfTones(1).
OBJECT-TYPE    
  INTEGER mfTones(1), dtmfTones(2)  

mdmCcT1KpStMfTones 1.3.6.1.4.1.429.1.6.7.1.1.43
Determines the usage of KP and ST MF tone encapsulation of the dial sequence. Default=enable(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmCcT1CallInitStrUse 1.3.6.1.4.1.429.1.6.7.1.1.44
Determines if calling init strings are used or not. Default=enable(1).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmCcT1CallInitStrBase 1.3.6.1.4.1.429.1.6.7.1.1.45
Determines if the calling init strings are based upon DNIS or ANI. Default=dnisBase(1).
OBJECT-TYPE    
  INTEGER dnisBase(1), aniBase(2)  

mdmCcIntBlackListDis 1.3.6.1.4.1.429.1.6.7.1.1.46
Disable BlackList restriction in the international modems. Default=0 (enable) s40.1 reg
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmCcOffHookRestrict 1.3.6.1.4.1.429.1.6.7.1.1.47
Disable off-hook restriction in the international modems. Default=0 (enable) S40.2 reg
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmCcT1DialInAniDig 1.3.6.1.4.1.429.1.6.7.1.1.48
Sets the number of ANI digits allowed in incoming calls. Default = 0.
OBJECT-TYPE    
  INTEGER 0..12  

mdmCcT1DialInDnisDig 1.3.6.1.4.1.429.1.6.7.1.1.49
Sets the number of DNIS/DID digits allowed in incoming calls. Default = 0.
OBJECT-TYPE    
  INTEGER 0..12  

mdmCcNoPbNoConnEna 1.3.6.1.4.1.429.1.6.7.1.1.50
Sets if to answer a call when there is no Packet Bus link. Normal is the Default =0
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcIdleDiscPatt 1.3.6.1.4.1.429.1.6.7.1.1.51
Idle disconnect pattern sent to the T1 NAC. Normal values: USA = 1, international = 84. Default = 1. Configure the T1 identically. Consult the help screen, user manual or US Robotics before changing. Modem register S71.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCcMnp10 1.3.6.1.4.1.429.1.6.7.1.1.52
S61.4 register disable/enable MNP10 originate mode.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcMnp10Ec 1.3.6.1.4.1.429.1.6.7.1.1.53
S61.5 register disable/enable MNP10EC originate mode.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcAtzPbHandling 1.3.6.1.4.1.429.1.6.7.1.1.54
ATZ handling over Packet Bus. S72 REG
OBJECT-TYPE    
  INTEGER normalAtz(1), atzPbIgnored(2), atzPbNvram(3)  

mdmCcDefltPRISlot 1.3.6.1.4.1.429.1.6.7.1.1.55
Default dialout PRI slot. Default = 1
OBJECT-TYPE    
  INTEGER 1..5  

mdmCcExtDTMFToneSupport 1.3.6.1.4.1.429.1.6.7.1.1.56
Enable/Disable DTMF extended support. Default = disable
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcDataOverVoice 1.3.6.1.4.1.429.1.6.7.1.1.57
Data Over Voice support originate S68.1.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCc2100AnswerTone 1.3.6.1.4.1.429.1.6.7.1.1.58
Data Over Voice support answer S68.2.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcEnableV120v42Bis 1.3.6.1.4.1.429.1.6.7.1.1.59
V.42bis Compression over V.120. S67.4
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcHdlcLicIe 1.3.6.1.4.1.429.1.6.7.1.1.60
This object is to Enable\Disable LIC IE message for HDLC protocols. S Register S68.3
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCcDtmfTerminationTone 1.3.6.1.4.1.429.1.6.7.1.1.61
This object is to set the DTMF Termination Tone.
OBJECT-TYPE    
  INTEGER 0..16  

mdmCcAfaxMaxRateSrvOpt20 1.3.6.1.4.1.429.1.6.7.1.1.62
This object is used to limit the maximum rate for an Analog Fax Connection. Service option 20. Upper nibble of the S94 register.
OBJECT-TYPE    
  INTEGER bps2400(1), bps4800(2), bps7200(3), bps9600(4), bps12000(5), bps14400(6)  

mdmCcAfaxMaxRateSrvOpt21 1.3.6.1.4.1.429.1.6.7.1.1.63
This object is used to limit the maximum rate for an Analog Fax Connection. Service option 21. Lower nibble of S94 register.
OBJECT-TYPE    
  INTEGER bps2400(1), bps4800(2), bps7200(3), bps9600(4), bps12000(5), bps14400(6)  

mdmEc 1.3.6.1.4.1.429.1.6.8
OBJECT IDENTIFIER    

mdmEcTable 1.3.6.1.4.1.429.1.6.8.1
A table of Error Control Parameters for each modem in this system, the quantity of entries is given by modemNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmEcEntry

mdmEcEntry 1.3.6.1.4.1.429.1.6.8.1.1
Configurable objects which define the modems error control operation.
OBJECT-TYPE    
  MdmEcEntry  

mdmEcIndex 1.3.6.1.4.1.429.1.6.8.1.1.1
This object contains the unique value assigned to this modem in the chassis mib entity relation table and is used as the mechanism for correctly indexing into this table.
OBJECT-TYPE    
  INTEGER  

mdmEcMnp3Dis 1.3.6.1.4.1.429.1.6.8.1.1.2
Determines if the modem will negotiate for MNP level 3 error correction. Default=enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmEcMnp4Dis 1.3.6.1.4.1.429.1.6.8.1.1.3
Determines if the modem will negotiate for MNP level 4 error correction. Default=enable.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmEcMnpUnusual 1.3.6.1.4.1.429.1.6.8.1.1.4
Determines if the modem will attempt to negotiate for MNP operation used in some early 2400bps modems. Default=disable.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmEcV42MnpHandshake 1.3.6.1.4.1.429.1.6.8.1.1.5
Determines what types of error correction the modem will attempt to negotiate. When configured for the default, full V.42 and MNP, the modem first tries to connect with V42 error control and then with MNP error control. When set to disable either V42 or MNP the modem will only attempt to negotiate the enabled protocol. When set to disable the V42 detect phase, it is not included in the handshaking process. This allows for faster connections between V42 modems.
OBJECT-TYPE    
  INTEGER enableAll(1), enableV42disableMnp(2), disablev42enablemnp(3), disableDetectionPhase(4)  

mdmCs 1.3.6.1.4.1.429.1.6.9
OBJECT IDENTIFIER    

mdmCsTable 1.3.6.1.4.1.429.1.6.9.1
A table of modem status and call statistic parameters for each modem in the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmCsEntry

mdmCsEntry 1.3.6.1.4.1.429.1.6.9.1.1
Objects that define the modem status and statistics specific to a the current connection when the modem is on line or to the last connection when the modem is idle.
OBJECT-TYPE    
  MdmCsEntry  

mdmCsIndex 1.3.6.1.4.1.429.1.6.9.1.1.1
The index value which uniquely identifies the modem to which this entry is applicable. The value corresponds to the index of the same modem in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

mdmCsStatus 1.3.6.1.4.1.429.1.6.9.1.1.2
Current status of a modem including presence(idle), availability(disabled), and call progress states.
OBJECT-TYPE    
  INTEGER idle(1), offHook(2), dialing(3), ringing(4), ringRcvd(5), linkNegotiation(6), onlineOriginate(7), onlineAnswer(8), localCommandMode(9), remoteCommandMode(10), lineBusiedOut(11), toneTest(12), responderTest105(13), responderTest102(14), failed(33), testingRom(49), testingRam(50), testingNvram(51), analogLoopback(52), localDigitalLoopback(53), remoteDigitalLoopback(54), selfTest(55), phoneTest(56), nonManagedDevice(57), slotEmpty(58), modemDisabled(59), notResponding(60), nonManagableDevice(61), miuFailed(62)  

mdmCsLastNumberDialedOut 1.3.6.1.4.1.429.1.6.9.1.1.3
An ASCII string which represents the last phone number dialed by the modem.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mdmCsLastNumberDialedIn 1.3.6.1.4.1.429.1.6.9.1.1.4
An ASCII string representing the last number dialed in(if known). This is the 950-xxx (DNIS) number.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mdmCsLastCallingPartyNum 1.3.6.1.4.1.429.1.6.9.1.1.5
An ASCII string representing the current or last party that called this modem. Only known in ANI applications.
OBJECT-TYPE    
  DisplayString SIZE(0..40)  

mdmCsOriginateAnswer 1.3.6.1.4.1.429.1.6.9.1.1.6
Defines whether the last or current call was originated or answered.
OBJECT-TYPE    
  INTEGER originateInOriginate(1), originateInAnswer(2), answerInOriginate(3), answerInAnswer(4)  

mdmCsRings 1.3.6.1.4.1.429.1.6.9.1.1.7
Defines the quantity of rings detected before the DTE answered with DTR on the last incomming call.
OBJECT-TYPE    
  INTEGER  

mdmCsDisconnectReason 1.3.6.1.4.1.429.1.6.9.1.1.8
Defines the reason that the last call was terminated.
OBJECT-TYPE    
  INTEGER dtrDrop(1), escapeSequence(2), athCommand(3), carrierLoss(4), inactivityTimout(5), mnpIncompatible(6), undefined(7), remotePassword(8), linkPassword(9), retransmitLimit(10), linkDisconnectMsgReceived(11), noLoopCurrent(12), invalidSpeed(13), unableToRetrain(14), managementCommand(15), noDialTone(16), keyAbort(17), lineBusy(18), noAnswer(19), voice(20), noAnswerTone(21), noCarrier(22), undetermined(23), v42SabmeTimeout(24), v42BreakTimeout(25), v42DisconnectCmd(26), v42IdExchangeFail(27), v42BadSetup(28), v42InvalidCodeWord(29), v42StringToLong(30), v42InvalidCommand(31), none(32), v32Cleardown(33), dialSecurity(34), remoteAccessDenied(35), loopLoss(36), ds0Teardown(37), promptNotEnabled(38), noPromptingInSync(39), nonArqMode(40), modeIncompatible(41), noPromptInNonARQ(42), dialBackLink(43), linkAbort(44), autopassFailed(45), pbGenericError(46), pbLinkErrTxPreAck(47), pbLinkErrTxTardyACK(48), pbTransmitBusTimeout(49), pbReceiveBusTimeout(50), pbLinkErrTxTAL(51), pbLinkErrRxTAL(52), pbTransmitMasterTimeout(53), pbClockMissing(54), pbReceivedLsWhileLinkUp(55), pbOutOfSequenceFrame(56), pbBadFrame(57), pbAckWaitTimeout(58), pbReceivedAckSequenceErr(59), pbReceiveOvrflwRNRFailed(60), pbReceiveMsgBufOvrflw(61), rcvdGatewayDiscCmd(62), tokenPassingTimeout(63), dspInterruptTimeout(64), mnpProtocolViolation(65), class2FaxHangupCmd(66), hstSpeedSwitchTimeout(67), tooManyUnacked(68), timerExpired(69), t1Glare(70), priDialoutRqTimeout(71), abortAnlgDstOvrIsdn(72), normalUserCallClear(73), normalUnspecified(74), bearerIncompatibility(75), protocolErrorEvent(76), abnormalDisconnect(77), invalidCauseValue(78), resourceUnavailable(79), remotHungUpDuringTraining(80), trainingTimeout(81), incomingModemNotAvailable(82), incomingInvalidBearerCap(83), incomingInvalidChannelID(84), incomingInvalidProgInd(85), incomingInvalidCallingPty(86), incomingInvalidCalledPty(87), incomingCallBlock(88), incomingLoopStNoRingOff(89), outgoingTelcoDisconnect(90), outgoingEMWinkTimeout(91), outgoingEMWinkTooShort(92), outgoingNoChannelAvail(93), dspReboot(94), noDSPRespToKA(95), noDSPRespToDisc(96), dspTailPtrInvalid(97), dspHeadPtrInvalid(98), dataProcessingGenericErr(99), timeslotUnavailable(100), gmtTimeNotSet(101), chasAwarenessNotAvailable(102), r2InvalidChannelDirection(103), r2ChannelBlockedByNetwork(104), r2Glare(105), r2OutgoingCallBlocked(106), r2DNISNotFound(107), r2SigCauseCongestion(108), r2SigCauseUnallocNumber(109), r2DSPFatalError(110), callBlacklisted(111)  

mdmCsConnectFailReason 1.3.6.1.4.1.429.1.6.9.1.1.9
Defines the reason for failure if indeed the last call attempt failed.
OBJECT-TYPE    
  INTEGER dtrDrop(1), escapeSequence(2), athCommand(3), carrierLoss(4), inactivityTimout(5), mnpIncompatible(6), undefined(7), remotePassword(8), linkPassword(9), retransmitLimit(10), linkDisconnectMsgReceived(11), noLoopCurrent(12), invalidSpeed(13), unableToRetrain(14), managementCommand(15), noDialTone(16), keyAbort(17), lineBusy(18), noAnswer(19), voice(20), noAnswerTone(21), noCarrier(22), undetermined(23), v42SabmeTimeout(24), v42BreakTimeout(25), v42DisconnectCmd(26), v42IdExchangeFail(27), v42BadSetup(28), v42InvalidCodeWord(29), v42StringToLong(30), v42InvalidCommand(31), none(32), v32Cleardown(33), dialSecurity(34), remoteAccessDenied(35), loopLoss(36), ds0Teardown(37), promptNotEnabled(38), noPromptingInSync(39), nonArqMode(40), modeIncompatible(41), noPromptInNonARQ(42), dialBackLink(43), linkAbort(44), autopassFailed(45), pbGenericError(46), pbLinkErrTxPreAck(47), pbLinkErrTxTardyACK(48), pbTransmitBusTimeout(49), pbReceiveBusTimeout(50), pbLinkErrTxTAL(51), pbLinkErrRxTAL(52), pbTransmitMasterTimeout(53), pbClockMissing(54), pbReceivedLsWhileLinkUp(55), pbOutOfSequenceFrame(56), pbBadFrame(57), pbAckWaitTimeout(58), pbReceivedAckSequenceErr(59), pbReceiveOvrflwRNRFailed(60), pbReceiveMsgBufOvrflw(61), rcvdGatewayDiscCmd(62), tokenPassingTimeout(63), dspInterruptTimeout(64), mnpProtocolViolation(65), class2FaxHangupCmd(66), hstSpeedSwitchTimeout(67), tooManyUnacked(68), timerExpired(69), t1Glare(70), priDialoutRqTimeout(71), abortAnlgDstOvrIsdn(72), normalUserCallClear(73), normalUnspecified(74), bearerIncompatibility(75), protocolErrorEvent(76), abnormalDisconnect(77), invalidCauseValue(78), resourceUnavailable(79), remotHungUpDuringTraining(80), trainingTimeout(81), incomingModemNotAvailable(82), incomingInvalidBearerCap(83), incomingInvalidChannelID(84), incomingInvalidProgInd(85), incomingInvalidCallingPty(86), incomingInvalidCalledPty(87), incomingCallBlock(88), incomingLoopStNoRingOff(89), outgoingTelcoDisconnect(90), outgoingEMWinkTimeout(91), outgoingEMWinkTooShort(92), outgoingNoChannelAvail(93), dspReboot(94), noDSPRespToKA(95), noDSPRespToDisc(96), dspTailPtrInvalid(97), dspHeadPtrInvalid(98), dataProcessingGenericErr(99), timeslotUnavailable(100), gmtTimeNotSet(101), chasAwarenessNotAvailable(102), r2InvalidChannelDirection(103), r2ChannelBlockedByNetwork(104), r2Glare(105), r2OutgoingCallBlocked(106), r2DNISNotFound(107), r2SigCauseCongestion(108), r2SigCauseUnallocNumber(109), r2DSPFatalError(110), callBlacklisted(111)  

mdmCsInitialTxLinkRate 1.3.6.1.4.1.429.1.6.9.1.1.10
The transmit speed at which the modem initialy connected on it's last or current call.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps7200(7), bps9600(8), bps12K(9), bps14K(10), bps16K(11), bps19K(12), bps38K(13), bps75(14), bps450(15), unknown(16), bps57K(17), bps21K(18), bps24K(19), bps26K(20), bps28K(21), bps31K(23), bps33K(24), bps25333(25), bps26666(26), bps28000(27), bps29333(28), bps30666(29), bps32000(30), bps33333(31), bps34666(32), bps36000(33), bps37333(34), bps38666(35), bps40000(36), bps41333(37), bps42666(38), bps44000(39), bps45333(40), bps46666(41), bps48000(42), bps49333(43), bps50666(44), bps52000(45), bps53333(46), bps54666(47), bps56000(48), bps57333(49), bps58666(50), bps60000(51), bps61333(52), bps62666(53), bps64000(54)  

mdmCsInitialRxLinkRate 1.3.6.1.4.1.429.1.6.9.1.1.11
The receive speed at which the modem initialy connected on it's previous or current call.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps7200(7), bps9600(8), bps12K(9), bps14K(10), bps16K(11), bps19K(12), bps38K(13), bps75(14), bps450(15), unknown(16), bps57K(17), bps21K(18), bps24K(19), bps26K(20), bps28K(21), bps31K(23), bps33K(24), bps25333(25), bps26666(26), bps28000(27), bps29333(28), bps30666(29), bps32000(30), bps33333(31), bps34666(32), bps36000(33), bps37333(34), bps38666(35), bps40000(36), bps41333(37), bps42666(38), bps44000(39), bps45333(40), bps46666(41), bps48000(42), bps49333(43), bps50666(44), bps52000(45), bps53333(46), bps54666(47), bps56000(48), bps57333(49), bps58666(50), bps60000(51), bps61333(52), bps62666(53), bps64000(54)  

mdmCsFinalTxLinkRate 1.3.6.1.4.1.429.1.6.9.1.1.12
The current transmit link rate of a connection, or the last link rate of the last connection.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps7200(7), bps9600(8), bps12K(9), bps14K(10), bps16K(11), bps19K(12), bps38K(13), bps75(14), bps450(15), unknown(16), bps57K(17), bps21K(18), bps24K(19), bps26K(20), bps28K(21), bps31K(23), bps33K(24), bps25333(25), bps26666(26), bps28000(27), bps29333(28), bps30666(29), bps32000(30), bps33333(31), bps34666(32), bps36000(33), bps37333(34), bps38666(35), bps40000(36), bps41333(37), bps42666(38), bps44000(39), bps45333(40), bps46666(41), bps48000(42), bps49333(43), bps50666(44), bps52000(45), bps53333(46), bps54666(47), bps56000(48), bps57333(49), bps58666(50), bps60000(51), bps61333(52), bps62666(53), bps64000(54)  

mdmCsFinalRxLinkRate 1.3.6.1.4.1.429.1.6.9.1.1.13
The current receive link rate of a connection, or the last link rate of the last connection.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps7200(7), bps9600(8), bps12K(9), bps14K(10), bps16K(11), bps19K(12), bps38K(13), bps75(14), bps450(15), unknown(16), bps57K(17), bps21K(18), bps24K(19), bps26K(20), bps28K(21), bps31K(23), bps33K(24), bps25333(25), bps26666(26), bps28000(27), bps29333(28), bps30666(29), bps32000(30), bps33333(31), bps34666(32), bps36000(33), bps37333(34), bps38666(35), bps40000(36), bps41333(37), bps42666(38), bps44000(39), bps45333(40), bps46666(41), bps48000(42), bps49333(43), bps50666(44), bps52000(45), bps53333(46), bps54666(47), bps56000(48), bps57333(49), bps58666(50), bps60000(51), bps61333(52), bps62666(53), bps64000(54)  

mdmCsModulationType 1.3.6.1.4.1.429.1.6.9.1.1.14
Specifies the current/final modulation type of the current or last call. The value can be different from the object mdmCsInitModulationType only for X2/V.90 calls.
OBJECT-TYPE    
  INTEGER usRoboticsHST(1), ccittV32(2), ccittV22bis(3), bell103(4), ccittV21(5), bell212(6), ccittV32bis(7), ccittV23(8), noConnection(9), bell208b(10), v21FaxClass1(11), v27FaxClass1(12), v29FaxClass1(13), v17FaxClass1(14), v21FaxClass2(15), v27FaxClass2(16), v29FaxClass2(17), v17FaxClass2(18), v32Terbo(19), v34(20), vFC(21), v34plus(22), x2server(23), v110(24), v120(25), x75(26), asyncSyncPPP(27), clearChannel(28), x2client(29), x2symmetric(30), piafs(31), x2version2(32), v90Analogue(33), v90Digital(34), v90AllDigital(35)  

mdmCsSyncAsyncModeUsed 1.3.6.1.4.1.429.1.6.9.1.1.15
Defines whether the current or last call was synchronous or asynchronous.
OBJECT-TYPE    
  INTEGER asynchronous(1), synchronous(2)  

mdmCsErrorControlType 1.3.6.1.4.1.429.1.6.9.1.1.16
Specifies the Error control settings in the current or last call. (short form)
OBJECT-TYPE    
  INTEGER none(1), mnpLevel3(2), mnpLevel4(3), ccittV42(4), usRoboticsHST(5), synchronousNone(6), mnpLevel2(7), mnp10(8), v42Etc(9), mnp10Ec(10), lapmEc(11), v42Etc2(12), ccittV42SREJ(13), piafs(14), v120(15), x75(16)  

mdmCsCompressionType 1.3.6.1.4.1.429.1.6.9.1.1.17
Specifies the data compression used in the current or last call. (short format)
OBJECT-TYPE    
  INTEGER none(1), ccittV42bis(2), mnpLevel5(3)  

mdmCsEqualizationType 1.3.6.1.4.1.429.1.6.9.1.1.18
Specifies the equalization used in the current or last call.
OBJECT-TYPE    
  INTEGER long(1), short(2)  

mdmCsFallbackEnabled 1.3.6.1.4.1.429.1.6.9.1.1.19
Specifies whether line speed fallbacks were negotiated on the current or previous call.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCsCharsSent 1.3.6.1.4.1.429.1.6.9.1.1.20
Specifies the number of characters sent on the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsCharsReceived 1.3.6.1.4.1.429.1.6.9.1.1.21
Specifies the number of characters received in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsOctetsSent 1.3.6.1.4.1.429.1.6.9.1.1.22
Specifies the number of octets sent in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsOctetsReceived 1.3.6.1.4.1.429.1.6.9.1.1.23
Specifies the number of octets received in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsBlocksSent 1.3.6.1.4.1.429.1.6.9.1.1.24
Specifies the number of blocks sent in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsBlocksReceived 1.3.6.1.4.1.429.1.6.9.1.1.25
Specifies the number of blocks received in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsBlocksResent 1.3.6.1.4.1.429.1.6.9.1.1.26
Specifies the number of blocks the modem has had to retransmit due to block errors or timeouts in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsRetrainsRequested 1.3.6.1.4.1.429.1.6.9.1.1.27
Specifies the number of retrains requested in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsRetrainsGranted 1.3.6.1.4.1.429.1.6.9.1.1.28
Specifies the number of retrains granted in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsLineReversalQty 1.3.6.1.4.1.429.1.6.9.1.1.29
Specifies the number of times the HST high and low speeds directions have been reversed in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsCharsLost 1.3.6.1.4.1.429.1.6.9.1.1.30
Specifies the number of characters lost on the current or previous call. Not meaningful on synchronous calls.
OBJECT-TYPE    
  INTEGER  

mdmCsBackChannelRate 1.3.6.1.4.1.429.1.6.9.1.1.31
Specifies the negotiated HST back channel speed on the current or previous call.
OBJECT-TYPE    
  INTEGER bps450(1), bps300(2), none(3)  

mdmCsBlerQty 1.3.6.1.4.1.429.1.6.9.1.1.32
Specifies the number of block errors received on the link in the current or last call.
OBJECT-TYPE    
  INTEGER  

mdmCsLinkTimeoutQty 1.3.6.1.4.1.429.1.6.9.1.1.33
Specifies the number of link protocol timeouts on the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsFallbackQty 1.3.6.1.4.1.429.1.6.9.1.1.34
Specifies the quantity of link speed fallbacks that occured on the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsUpshiftQty 1.3.6.1.4.1.429.1.6.9.1.1.35
Specifies the number of link speed upshifts have occured in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsLinkNakQty 1.3.6.1.4.1.429.1.6.9.1.1.36
Specifies the quantity of negative acknowledgements sent in response to errored blocks received on the link in the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsGainHitCount 1.3.6.1.4.1.429.1.6.9.1.1.37
The modem calculates the gain that is required to adjust the received signal to the ideal level. This defines the number of times that the gain was recalculated durring the current or previous call.
OBJECT-TYPE    
  INTEGER  

mdmCsSecurityUserName 1.3.6.1.4.1.429.1.6.9.1.1.38
The last dial security user that initiated the Call. This object is not saved to NVRAM.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

mdmCsCallDuration 1.3.6.1.4.1.429.1.6.9.1.1.39
This is the length of the call in hh:mm:ss format. The maximum value reported will be 9999:59:59.
OBJECT-TYPE    
  DisplayString SIZE(0..10)  

mdmCsCallRefNum 1.3.6.1.4.1.429.1.6.9.1.1.40
Call Reference Number
OBJECT-TYPE    
  INTEGER  

mdmCsPriCardSlot 1.3.6.1.4.1.429.1.6.9.1.1.41
Primary Card Slot
OBJECT-TYPE    
  INTEGER  

mdmCsTDMTimeSlot 1.3.6.1.4.1.429.1.6.9.1.1.42
Time Division Multipexing Time Slot
OBJECT-TYPE    
  INTEGER  

mdmCsPriCardSpanLine 1.3.6.1.4.1.429.1.6.9.1.1.43
Primary Card Span Line
OBJECT-TYPE    
  INTEGER  

mdmCsBChannelUsed 1.3.6.1.4.1.429.1.6.9.1.1.44
B Channel Used
OBJECT-TYPE    
  INTEGER  

mdmCsQCarrFreqTx 1.3.6.1.4.1.429.1.6.9.1.1.45
Transmit carrier value (Hz).
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQCarrFreqRx 1.3.6.1.4.1.429.1.6.9.1.1.46
Receive carrier value (Hz).
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQSymRateTx 1.3.6.1.4.1.429.1.6.9.1.1.47
Transmit symbol rate.
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQSymRateRx 1.3.6.1.4.1.429.1.6.9.1.1.48
Receive symbol rate.
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQTrellisTx 1.3.6.1.4.1.429.1.6.9.1.1.49
Transmit Trellis coding.
OBJECT-TYPE    
  INTEGER trellis8S-2D(1), trellis16S-4D(2), trellis32S-2D(3), trellis64S-4D(4)  

mdmCsQTrellisRx 1.3.6.1.4.1.429.1.6.9.1.1.50
Receive Trellis coding.
OBJECT-TYPE    
  INTEGER trellis8S-2D(1), trellis16S-4D(2), trellis32S-2D(3), trellis64S-4D(4)  

mdmCsQNonLinCdTx 1.3.6.1.4.1.429.1.6.9.1.1.51
Status of transmit non-linear coding.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mdmCsQNonLinCdRx 1.3.6.1.4.1.429.1.6.9.1.1.52
Status of receive non-linear coding.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mdmCsQPrecodingTx 1.3.6.1.4.1.429.1.6.9.1.1.53
Status of transmit precoding.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mdmCsQPrecodingRx 1.3.6.1.4.1.429.1.6.9.1.1.54
Status of receive precoding.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mdmCsQShapingTx 1.3.6.1.4.1.429.1.6.9.1.1.55
Status of transmit shaping.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mdmCsQShapingRx 1.3.6.1.4.1.429.1.6.9.1.1.56
Status of receive shaping.
OBJECT-TYPE    
  INTEGER off(1), on(2)  

mdmCsQPreemphTx 1.3.6.1.4.1.429.1.6.9.1.1.57
Transmit pre-emphasis (-dBm).
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQPreemphRx 1.3.6.1.4.1.429.1.6.9.1.1.58
Receive pre-emphasis (-dBm).
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQRxLevel 1.3.6.1.4.1.429.1.6.9.1.1.59
Receive level (X 10) (-dBm).
OBJECT-TYPE    
  INTEGER  

mdmCsQTxLevel 1.3.6.1.4.1.429.1.6.9.1.1.60
Transmit level (X 10) (-dBm).
OBJECT-TYPE    
  INTEGER  

mdmCsQSNR 1.3.6.1.4.1.429.1.6.9.1.1.61
Signal to noise (x 10) (dB).
OBJECT-TYPE    
  INTEGER  

mdmCsQNearEcho 1.3.6.1.4.1.429.1.6.9.1.1.62
Near echo (x 10) (dB).
OBJECT-TYPE    
  INTEGER  

mdmCsQFarEcho 1.3.6.1.4.1.429.1.6.9.1.1.63
Far echo (x 10) (dB).
OBJECT-TYPE    
  INTEGER  

mdmCsQRndTripDly 1.3.6.1.4.1.429.1.6.9.1.1.64
Round trip delay (msec).
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQPacketSizeCurr 1.3.6.1.4.1.429.1.6.9.1.1.65
Current packet size (bytes).
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQPacketSizeLow 1.3.6.1.4.1.429.1.6.9.1.1.66
Min. packet size (bytes).
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQPacketSizeHigh 1.3.6.1.4.1.429.1.6.9.1.1.67
Max. packet size (bytes).
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQCellTxLevelCurr 1.3.6.1.4.1.429.1.6.9.1.1.68
Current Tx level cellular (x 10)(-dBm).
OBJECT-TYPE    
  INTEGER  

mdmCsQCellTxLevelLow 1.3.6.1.4.1.429.1.6.9.1.1.69
Min. Tx level cellular (x 10)(-dBm).
OBJECT-TYPE    
  INTEGER  

mdmCsQCellTxLevelHigh 1.3.6.1.4.1.429.1.6.9.1.1.70
Max. Tx level cellular (x 10)(-dBm).
OBJECT-TYPE    
  INTEGER  

mdmCsQSNRLevelCurr 1.3.6.1.4.1.429.1.6.9.1.1.71
Current SNR level cellular (x 10) (-dBm).
OBJECT-TYPE    
  INTEGER  

mdmCsQSNRLevelLow 1.3.6.1.4.1.429.1.6.9.1.1.72
Min. SNR level cellular (x 10) (-dBm).
OBJECT-TYPE    
  INTEGER  

mdmCsQSNRLevelHigh 1.3.6.1.4.1.429.1.6.9.1.1.73
Max. SNR level cellular (x 10) (-dBm).
OBJECT-TYPE    
  INTEGER  

mdmCsQCellularProt 1.3.6.1.4.1.429.1.6.9.1.1.74
Current cellular protocol.
OBJECT-TYPE    
  INTEGER none(1), mnp10(2), mnp10ec(3), v42etc(4)  

mdmCsFreqProbeData 1.3.6.1.4.1.429.1.6.9.1.1.75
Probe frequency.
OBJECT-TYPE    
  OCTET STRING SIZE(0..60)  

mdmCsLevelProbeData 1.3.6.1.4.1.429.1.6.9.1.1.76
Probe level.
OBJECT-TYPE    
  OCTET STRING SIZE(0..30)  

mdmCsQTimingOffset 1.3.6.1.4.1.429.1.6.9.1.1.77
Timing Offset in parts per million.
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQCarrierOffset 1.3.6.1.4.1.429.1.6.9.1.1.78
Carrier Offset in Hertz.
OBJECT-TYPE    
  INTEGER 0..65535  

mdmCsQCoding 1.3.6.1.4.1.429.1.6.9.1.1.80
PCM Coding mu/A law Default=mulaw.
OBJECT-TYPE    
  INTEGER mulaw(1), alaw(2)  

mdmCsTrainingInfo 1.3.6.1.4.1.429.1.6.9.1.1.81
Training Information
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

mdmCsX2signature 1.3.6.1.4.1.429.1.6.9.1.1.82
X2 diagnostics information from modem in hex.
OBJECT-TYPE    
  OCTET STRING SIZE(0..255)  

mdmCsX2Status 1.3.6.1.4.1.429.1.6.9.1.1.83
x2 status of modem.
OBJECT-TYPE    
  INTEGER x2v90NotOperational(1), x2Operational(2), v8DisabledLocal(3), x2DisabledLocal(4), baud3200DisabledLocal(5), speedLimitedLocal(6), v8notDetectedFromRemote(7), x2notDetectedFromRemote(8), incompatibleX2Versions(9), incompatibleX2Modes(10), baud3200DisabledRemote(11), excessiveHFAttenuation(12), channelNoSymbolRate(13), exitBeforeX2Connect(14), v90Operational(15), x2v90Operational(16), v90DisabledLocal(17), x2v90DisabledLocal(18), v90SymRatesDisabledLcl(19), v90NotDetectedFrmRemote(20), x2v90NotDetectedFrmRmt(21), incompatibleV90Versions(22), incompatibleV90Modes(23), v90IncompactibleSymRate(24)  

mdmCsCallType 1.3.6.1.4.1.429.1.6.9.1.1.84
Call type information.
OBJECT-TYPE    
  INTEGER analogCall(1), chT1WinkStart(2), chT1ImmediateStart(3), chT1LoopStart(4), chT1GroundStart(5), chT1PRICall(6)  

mdmCsCallStartTime 1.3.6.1.4.1.429.1.6.9.1.1.85
Call started time in GMT format.
OBJECT-TYPE    
  INTEGER  

mdmCsCallEndTime 1.3.6.1.4.1.429.1.6.9.1.1.86
Call Ended time in GMT format.
OBJECT-TYPE    
  INTEGER  

mdmCsDigitalPadAttenuated 1.3.6.1.4.1.429.1.6.9.1.1.87
Attenuation of the digital pad in tenths of DB.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCsInitModulationType 1.3.6.1.4.1.429.1.6.9.1.1.88
Specifies the modulation type of the current or last call. The value can be different from the object mdmCsModulationType only for X2/V.90 calls.
OBJECT-TYPE    
  INTEGER usRoboticsHST(1), ccittV32(2), ccittV22bis(3), bell103(4), ccittV21(5), bell212(6), ccittV32bis(7), ccittV23(8), noConnection(9), bell208b(10), v21FaxClass1(11), v27FaxClass1(12), v29FaxClass1(13), v17FaxClass1(14), v21FaxClass2(15), v27FaxClass2(16), v29FaxClass2(17), v17FaxClass2(18), v32Terbo(19), v34(20), vFC(21), v34plus(22), x2server(23), v110(24), v120(25), x75(26), asyncSyncPPP(27), clearChannel(28), x2client(29), x2symmetric(30), piafs(31), x2version2(32), v90Analogue(33), v90Digital(34), v90AllDigital(35)  

mdmCsRxMinSpeed 1.3.6.1.4.1.429.1.6.9.1.1.89
Current/Last Session MIN Rx Speed.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps7200(7), bps9600(8), bps12K(9), bps14K(10), bps16K(11), bps19K(12), bps38K(13), bps75(14), bps450(15), unknown(16), bps57K(17), bps21K(18), bps24K(19), bps26K(20), bps28K(21), bps31K(23), bps33K(24), bps25333(25), bps26666(26), bps28000(27), bps29333(28), bps30666(29), bps32000(30), bps33333(31), bps34666(32), bps36000(33), bps37333(34), bps38666(35), bps40000(36), bps41333(37), bps42666(38), bps44000(39), bps45333(40), bps46666(41), bps48000(42), bps49333(43), bps50666(44), bps52000(45), bps53333(46), bps54666(47), bps56000(48), bps57333(49), bps58666(50), bps60000(51), bps61333(52), bps62666(53), bps64000(54)  

mdmCsRxMaxSpeed 1.3.6.1.4.1.429.1.6.9.1.1.90
Current/Last Session MAX Rx Speed.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps7200(7), bps9600(8), bps12K(9), bps14K(10), bps16K(11), bps19K(12), bps38K(13), bps75(14), bps450(15), unknown(16), bps57K(17), bps21K(18), bps24K(19), bps26K(20), bps28K(21), bps31K(23), bps33K(24), bps25333(25), bps26666(26), bps28000(27), bps29333(28), bps30666(29), bps32000(30), bps33333(31), bps34666(32), bps36000(33), bps37333(34), bps38666(35), bps40000(36), bps41333(37), bps42666(38), bps44000(39), bps45333(40), bps46666(41), bps48000(42), bps49333(43), bps50666(44), bps52000(45), bps53333(46), bps54666(47), bps56000(48), bps57333(49), bps58666(50), bps60000(51), bps61333(52), bps62666(53), bps64000(54)  

mdmCsTxMinSpeed 1.3.6.1.4.1.429.1.6.9.1.1.91
Current/Last Session MIN Tx Speed.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps7200(7), bps9600(8), bps12K(9), bps14K(10), bps16K(11), bps19K(12), bps38K(13), bps75(14), bps450(15), unknown(16), bps57K(17), bps21K(18), bps24K(19), bps26K(20), bps28K(21), bps31K(23), bps33K(24), bps25333(25), bps26666(26), bps28000(27), bps29333(28), bps30666(29), bps32000(30), bps33333(31), bps34666(32), bps36000(33), bps37333(34), bps38666(35), bps40000(36), bps41333(37), bps42666(38), bps44000(39), bps45333(40), bps46666(41), bps48000(42), bps49333(43), bps50666(44), bps52000(45), bps53333(46), bps54666(47), bps56000(48), bps57333(49), bps58666(50), bps60000(51), bps61333(52), bps62666(53), bps64000(54)  

mdmCsTxMaxSpeed 1.3.6.1.4.1.429.1.6.9.1.1.92
Current/Last Session MAX Tx Speed.
OBJECT-TYPE    
  INTEGER bps110(1), bps300(2), bps600(3), bps1200(4), bps2400(5), bps4800(6), bps7200(7), bps9600(8), bps12K(9), bps14K(10), bps16K(11), bps19K(12), bps38K(13), bps75(14), bps450(15), unknown(16), bps57K(17), bps21K(18), bps24K(19), bps26K(20), bps28K(21), bps31K(23), bps33K(24), bps25333(25), bps26666(26), bps28000(27), bps29333(28), bps30666(29), bps32000(30), bps33333(31), bps34666(32), bps36000(33), bps37333(34), bps38666(35), bps40000(36), bps41333(37), bps42666(38), bps44000(39), bps45333(40), bps46666(41), bps48000(42), bps49333(43), bps50666(44), bps52000(45), bps53333(46), bps54666(47), bps56000(48), bps57333(49), bps58666(50), bps60000(51), bps61333(52), bps62666(53), bps64000(54)  

mdmCsCollectedDTMFDigits 1.3.6.1.4.1.429.1.6.9.1.1.93
This object is an ASCII array of the DTMF digits collected from the client.
OBJECT-TYPE    
  OCTET STRING SIZE(0..64)  

mdmEv 1.3.6.1.4.1.429.1.6.10
OBJECT IDENTIFIER    

mdmEvTable 1.3.6.1.4.1.429.1.6.10.1
A list of modem events.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmEvEntry

mdmEvEntry 1.3.6.1.4.1.429.1.6.10.1.1
Modem events that can be managed.
OBJECT-TYPE    
  MdmEvEntry  

mdmEvIndex 1.3.6.1.4.1.429.1.6.10.1.1.1
Index into event table.
OBJECT-TYPE    
  INTEGER  

mdmEvWatchdogTimouts 1.3.6.1.4.1.429.1.6.10.1.1.2
Quantity of times that a watchdog timeout has been detected for this modem.
OBJECT-TYPE    
  Counter  

mdmEvDteIdleTimouts 1.3.6.1.4.1.429.1.6.10.1.1.3
The number of times that the modem has had no DTE activity for the time specified by mdmEtDteIdleThresh.
OBJECT-TYPE    
  Counter  

mdmEvInConnectEstabs 1.3.6.1.4.1.429.1.6.10.1.1.4
The number of times that the modem has reported a incomming connection established event.
OBJECT-TYPE    
  Counter  

mdmEvOutConnectEstabs 1.3.6.1.4.1.429.1.6.10.1.1.5
The number of times that the modem has reported an outgoing connection established event.
OBJECT-TYPE    
  Counter  

mdmEvInConnectTerms 1.3.6.1.4.1.429.1.6.10.1.1.6
The number of times the modem has reported an incomming connection terminated event.
OBJECT-TYPE    
  Counter  

mdmEvOutConnectTerms 1.3.6.1.4.1.429.1.6.10.1.1.7
The number of times the modem has reported an outgoing connection termination event.
OBJECT-TYPE    
  Counter  

mdmEvConnectAttemptFails 1.3.6.1.4.1.429.1.6.10.1.1.8
The number of times the modem has reported a connect attempt failure event. This does not include those connect attempt failures that are reported due to no dial tone and no loop current.
OBJECT-TYPE    
  Counter  

mdmEvConnectTimouts 1.3.6.1.4.1.429.1.6.10.1.1.9
The number of times that the NMC has detected a call that has has a duration in excess of the threshold defined in mdmEtConnectThresh.
OBJECT-TYPE    
  Counter  

mdmEvMgmtBusFailures 1.3.6.1.4.1.429.1.6.10.1.1.10
The number of times the NMC has been unable to get a response from the modem to requests on the management bus.
OBJECT-TYPE    
  Counter  

mdmEvResetByDtes 1.3.6.1.4.1.429.1.6.10.1.1.11
The number of times that the modem has been reset by the DTE via the ATZ command or by DTR drop.
OBJECT-TYPE    
  Counter  

mdmEvDtrFalses 1.3.6.1.4.1.429.1.6.10.1.1.12
The number of times the modem has reported DTR False events. The DTR false event timeout is based on mdmEtDtrFalseThresh.
OBJECT-TYPE    
  Counter  

mdmEvDtrTrues 1.3.6.1.4.1.429.1.6.10.1.1.13
The number of times the modem has reported DTR True events. The modem reports these events to the NMC based on the value of mdmEtDtrTrueTresh.
OBJECT-TYPE    
  Counter  

mdmEvNoTones 1.3.6.1.4.1.429.1.6.10.1.1.14
The number of times the modem reported no tones.
OBJECT-TYPE    
  Counter  

mdmEvNoLoops 1.3.6.1.4.1.429.1.6.10.1.1.15
The number of times the modem reported no loop current events.
OBJECT-TYPE    
  Counter  

mdmEvBlers 1.3.6.1.4.1.429.1.6.10.1.1.16
The number of times the modem reported BLERs.
OBJECT-TYPE    
  Counter  

mdmEvFallBacks 1.3.6.1.4.1.429.1.6.10.1.1.17
The number of times the modem reported fall backs.
OBJECT-TYPE    
  Counter  

mdmEvInConnectTime 1.3.6.1.4.1.429.1.6.10.1.1.18
Cumulative counter for inbound call connect time.
OBJECT-TYPE    
  Counter  

mdmEvInTotalBytesRx 1.3.6.1.4.1.429.1.6.10.1.1.19
Cumulative counter for number of bytes received on inbound calls.
OBJECT-TYPE    
  Counter  

mdmEvInTotalBytesTx 1.3.6.1.4.1.429.1.6.10.1.1.20
Cumulative counter for number of bytes transmitted on inbound calls.
OBJECT-TYPE    
  Counter  

mdmEvOutConnectTime 1.3.6.1.4.1.429.1.6.10.1.1.21
Cumulative counter for outbound call connect time.
OBJECT-TYPE    
  Counter  

mdmEvOutTotalBytesRx 1.3.6.1.4.1.429.1.6.10.1.1.22
Cumulative counter for number of bytes received on outbound calls.
OBJECT-TYPE    
  Counter  

mdmEvOutTotalBytesTx 1.3.6.1.4.1.429.1.6.10.1.1.23
Cumulative counter for number of bytes transmitted on outbound calls.
OBJECT-TYPE    
  Counter  

mdmEvInConnAttemptFails 1.3.6.1.4.1.429.1.6.10.1.1.24
The number of times the modem has reported a inbound connect attempt failure event. This does not include those connect attempt failues that are reported due to no dial time and no loop current.
OBJECT-TYPE    
  Counter  

mdmEvOutConnAttemptFails 1.3.6.1.4.1.429.1.6.10.1.1.25
The number of times the modem has reported a outbound connect attempt failure event. This does not include those connect attempt failures that are reported due to no dial tone and no loop current.
OBJECT-TYPE    
  Counter  

mdmEt 1.3.6.1.4.1.429.1.6.11
OBJECT IDENTIFIER    

mdmEtTable 1.3.6.1.4.1.429.1.6.11.1
Table of event thresholds used for setting up the modem to report events that can in turn be monitored by RMON.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmEtEntry

mdmEtEntry 1.3.6.1.4.1.429.1.6.11.1.1
Event Thresholds that are used by the modem and the NMC to qualify certain events.
OBJECT-TYPE    
  MdmEtEntry  

mdmEtIndex 1.3.6.1.4.1.429.1.6.11.1.1.1
Index into table used to identify the the specific modem, contians the unique value from the chassis mib entity table.
OBJECT-TYPE    
  INTEGER  

mdmEtDteIdleThresh 1.3.6.1.4.1.429.1.6.11.1.1.2
Defines the length of time for the modem to wait before reporting a 'DTE transmit data idle' event. (There must be no activity on the DTE transmit line for the specified quantity of minutes.
OBJECT-TYPE    
  INTEGER 0..255  

mdmEtDtrFalseThresh 1.3.6.1.4.1.429.1.6.11.1.1.3
Defines the quantity of seconds that will be used by the modem to qualify a 'DTR False' event.
OBJECT-TYPE    
  INTEGER 0..255  

mdmEtDtrTrueThresh 1.3.6.1.4.1.429.1.6.11.1.1.4
Defines the quantity of seconds that the modem will use to qualify a 'DTR True' event.
OBJECT-TYPE    
  INTEGER 0..255  

mdmEtConnTimeLimit 1.3.6.1.4.1.429.1.6.11.1.1.5
Defines the number of minutes that a call may be connected before triggering the 'connect timer limit' event. A value of zero for this limit means that no event is to be detected (ie. no time limit).
OBJECT-TYPE    
  INTEGER 0..255  

mdmEtBlerThresh 1.3.6.1.4.1.429.1.6.11.1.1.6
Defines the number of BLERs that will be used to qualify the 'BLER count at threshold' event for a given call.
OBJECT-TYPE    
  INTEGER 0..255  

mdmEtFallbackThresh 1.3.6.1.4.1.429.1.6.11.1.1.7
Defines the number of fallbacks at which the 'fallback count at threshold' event will be generated for a given call.
OBJECT-TYPE    
  INTEGER 0..255  

mdmCd 1.3.6.1.4.1.429.1.6.12
OBJECT IDENTIFIER    

mdmCdTable 1.3.6.1.4.1.429.1.6.12.1
The command table contains an entry for each modem installed in a chassis. It provides a means for processing actions requested by the management console. The mechanism used is to set the command and get the result which will indicate the success of the request.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmCdEntry

mdmCdEntry 1.3.6.1.4.1.429.1.6.12.1.1
Objects that are used to request that certain actions be taken by the modem itself or that the NMC take certain actions for the modem.
OBJECT-TYPE    
  MdmCdEntry  

mdmCdIndex 1.3.6.1.4.1.429.1.6.12.1.1.1
The index value which uniquely identifies the modem to which this entry is applicable. The value corresponds to the index of the corresponding modem in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

mdmCdMgtStationId 1.3.6.1.4.1.429.1.6.12.1.1.2
This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with uchasCmdReqId and uchasCmdResult to detect interference from other MSs.
OBJECT-TYPE    
  OCTET STRING SIZE(0..8)  

mdmCdReqId 1.3.6.1.4.1.429.1.6.12.1.1.3
This object contains the value of the request-id field in the SNMP PDU which invoked the most recent command or test on this modem. If the request-id is unknown or undefined, this object contains the value zero.
OBJECT-TYPE    
  INTEGER  

mdmCdFunction 1.3.6.1.4.1.429.1.6.12.1.1.4
This object contains a value that describes the command that is being invoked.
OBJECT-TYPE    
  INTEGER noCommand(1), softwareReset(2), storeToNvram(3), restoreFromDflt(4), restoreFromNvram(5), offHook(6), onHook(7), sndTone(8), rcvTone(9), endTest(10), rspndrTest105(11), rspndrTest102(12), lclAnlgLpbk(13), lclDgtlLpbk(14), rmtDgtlLpbk(15), selfTest(16), testRam(17), testRom(18), testNVRAM(19), v54LclAnlgLpbk(20), v54RmtDgtlLpbk(21), idlePhoneLine(22), loadHwFlowDflt(23), loadSwFlowDflt(24), loadMnp10CllulrDflt(25), loadV42CllulrMblDflt(26), loadV42CllulrFxdDflt(27), hardBusyAtDisable(33), softBusyAtDisable(34), restoreLineAt(35)  

mdmCdForce 1.3.6.1.4.1.429.1.6.12.1.1.5
In certain cases the modem may be in a state where certain commands could adversely affect connectiuons. In such cases, a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings, this object can be set to force in a subsequent request to cause the command to be carried out regardless of the potetialy hazzerdous effect.
OBJECT-TYPE    
  INTEGER force(1), noForce(2)  

mdmCdParam 1.3.6.1.4.1.429.1.6.12.1.1.6
This object can contain parameters that are specific to the particualar command being issued.
OBJECT-TYPE    
  OCTET STRING SIZE(0..24)  

mdmCdResult 1.3.6.1.4.1.429.1.6.12.1.1.7
This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since last reset.
OBJECT-TYPE    
  INTEGER none(1), success(2), inProgress(3), notSupported(4), unAbleToRun(5), aborted(6), failed(7)  

mdmCdCode 1.3.6.1.4.1.429.1.6.12.1.1.8
The value of this object indicates a further description of what went wrong when a command fails.
OBJECT-TYPE    
  INTEGER noError(1), unable(2), unrecognizedCommand(6), slotEmpty(8), noResponse(12), notConnected(13), connected(14), onLine(17), unsupportedCommand(20), deviceDisabled(22), deviceInTestMode(24), testFailed(25), deviceInSecurityMode(31), noRTS(51), noDTR(52), wrongLoopbackSpeed(53), noLoopbackInARQ(54), pendingSoftwareDownload(73), invalidFrequency(89), noLoopCurrent(90), noDialTone(91), noLineDetected(92)  

mdmTe 1.3.6.1.4.1.429.1.6.13
OBJECT IDENTIFIER    

mdmTeTable 1.3.6.1.4.1.429.1.6.13.1
A table containing an enable for each trap that a modem entity is capable of generating. Some of these events occur often and traps may flood the network if care is not taken to avoid such conditions. These traps should be enabled sparingly. (usually only when debugging a problem on a particular modem)
OBJECT-TYPE    
  SEQUENCE OF  
    MdmTeEntry

mdmTeEntry 1.3.6.1.4.1.429.1.6.13.1.1
There is one modem trap enable row for each modem entity in the NAS chassis.
OBJECT-TYPE    
  MdmTeEntry  

mdmTeIndex 1.3.6.1.4.1.429.1.6.13.1.1.1
A unique index which identifies the modem for which these trap enables pertain. The index to the trap enable table matches the index of the corresponding modem in the entity table in the chassis MIB.
OBJECT-TYPE    
  INTEGER  

mdmTeInConnEstablished 1.3.6.1.4.1.429.1.6.13.1.1.2
Enables generation of an SNMP trap upon detection of an incoming connection establishment on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeOutConnEstablished 1.3.6.1.4.1.429.1.6.13.1.1.3
Enables generation of an SNMP trap upon detection of an outgoing connection establishment on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeInConnTerminated 1.3.6.1.4.1.429.1.6.13.1.1.4
Enables generation of an SNMP trap upon detection of an incoming connection termination on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeOutConnTerminated 1.3.6.1.4.1.429.1.6.13.1.1.5
Enables generation of an SNMP trap upon detection of an outgoing connection terminated on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeConnAttemptFailure 1.3.6.1.4.1.429.1.6.13.1.1.6
Enables generation of an SNMP trap upon detection of a connection attemp failure on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeConnLimitExpired 1.3.6.1.4.1.429.1.6.13.1.1.7
Enables generation of an SNMP trap upon detection of the expiration of the connection time limit on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeDteXmitDataIdle 1.3.6.1.4.1.429.1.6.13.1.1.8
Enables generation of an SNMP trap upon detection of DTE transmit data idle on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeDtrTrue 1.3.6.1.4.1.429.1.6.13.1.1.9
Enables generation of an SNMP trap upon detection of DTR going true on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeDtrFalse 1.3.6.1.4.1.429.1.6.13.1.1.10
Enables generation of an SNMP trap upon detection of DTR going false on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeBlerCountAtThresh 1.3.6.1.4.1.429.1.6.13.1.1.11
Enables generation of an SNMP trap upon detection of the BLER count at the specified threshold on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeFallbkCountAtThresh 1.3.6.1.4.1.429.1.6.13.1.1.12
Enables generation of an SNMP trap upon detection of the fallback count at the specified threshold on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeNoDialTone 1.3.6.1.4.1.429.1.6.13.1.1.13
Enables generation of an SNMP trap upon detection of no dial tone on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeNoLoopCurrent 1.3.6.1.4.1.429.1.6.13.1.1.14
Enables generation of an SNMP trap upon detection of no loop current on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeResetByDTE 1.3.6.1.4.1.429.1.6.13.1.1.15
Enables generation of an SNMP trap upon detection of reset by DTE on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeDialOutCallDur 1.3.6.1.4.1.429.1.6.13.1.1.16
Enables the dial out (from the NMC) call duration trap. Default = disable(2).
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeDialInCallDur 1.3.6.1.4.1.429.1.6.13.1.1.17
Enables the dial in (to the NMC) call duration trap. Default = disable(2).
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTePbActive 1.3.6.1.4.1.429.1.6.13.1.1.18
Enables the Packet Bus Active. Default = disable(2).
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTePbLost 1.3.6.1.4.1.429.1.6.13.1.1.19
Enables the Packet Bus Lost trap. Default = disable(2).
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeDteRingNoAns 1.3.6.1.4.1.429.1.6.13.1.1.20
Enables the Dte Ring No Answer trap. Default = disable(2).
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTePbClockLossEvent 1.3.6.1.4.1.429.1.6.13.1.1.21
This object is used to disable the ability for a NAC to report when the packet bus clock has been lost. Default = disableAll(2).
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTePbClockRestoreEvent 1.3.6.1.4.1.429.1.6.13.1.1.22
This object is used to disable the ability for a NAC to report when the packet bus clock has been restored. Default = disableAll(2).
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeInConnAttemptFail 1.3.6.1.4.1.429.1.6.13.1.1.23
Enables generation of a SNMP trap upon detection of an inbound connection attempt failure on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTeOutConnAttemptFail 1.3.6.1.4.1.429.1.6.13.1.1.24
Enables generation of a SNMP trap upon detection of an outbound connection attempt failure on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmTe105ResponderTest 1.3.6.1.4.1.429.1.6.13.1.1.25
Enables generation of a SNMP trap upon detection of a 105 responder test on the specified modem.
OBJECT-TYPE    
  INTEGER enableTrap(1), disableAll(2), enableLog(3), enableAll(4)  

mdmLs 1.3.6.1.4.1.429.1.6.14
OBJECT IDENTIFIER    

mdmLsTable 1.3.6.1.4.1.429.1.6.14.1
A table defining all the Link Security parameters for each modem in the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmLsTableEntry

mdmLsTableEntry 1.3.6.1.4.1.429.1.6.14.1.1
Link Security parameters for a modem. These define the link level security operations which take place when a call is negotiated.
OBJECT-TYPE    
  MdmLsTableEntry  

mdmLsIndex 1.3.6.1.4.1.429.1.6.14.1.1.1
The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index to the entity table in the chassis MIB that corresponds to the same modem.
OBJECT-TYPE    
  INTEGER  

mdmLsSecurityEnable 1.3.6.1.4.1.429.1.6.14.1.1.2
Allows to disable/enable the dial security feature for the modem.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmLsFallbackPromptEnable 1.3.6.1.4.1.429.1.6.14.1.1.3
Disables/enables the prompting by the called modem when the auto pass password supplied by the caller fails or if no password is supplied at all.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmLsForcePromptEnable 1.3.6.1.4.1.429.1.6.14.1.1.4
If this is enabled, the modem will prompt the remote user for a password regardless of the success of the modem to negotiate the auto pass password.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmLsLocAccPasswdEnable 1.3.6.1.4.1.429.1.6.14.1.1.5
Disables/enables the Local Access Password feature used to establish security check when accessing any security setting.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmLsDialBackEnable 1.3.6.1.4.1.429.1.6.14.1.1.6
If this is set to enable the modem, after successful password validation, will disconnect and dial out to the originating modem.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmLsAutoPassPasswd 1.3.6.1.4.1.429.1.6.14.1.1.7
Contains the Auto Pass Password used for establishing Link security during call negotiation.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

mdmLsLocalAccessPasswd 1.3.6.1.4.1.429.1.6.14.1.1.8
Contains the Local Access password used when accessing any security setting and when Local Access password feature is enabled.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

mdmLsAccountPasswd 1.3.6.1.4.1.429.1.6.14.1.1.9
Contains the fall back password which must be entered if auto pass password is not satisfied.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

mdmHs 1.3.6.1.4.1.429.1.6.15
OBJECT IDENTIFIER    

mdmHsTable 1.3.6.1.4.1.429.1.6.15.1
A table containing the Hub security parameters accessible in the modem.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmHsEntry

mdmHsEntry 1.3.6.1.4.1.429.1.6.15.1.1
There is one entry in this table for each modem entity found in the chassis mib entity table.
OBJECT-TYPE    
  MdmHsEntry  

mdmHsIndex 1.3.6.1.4.1.429.1.6.15.1.1.1
An index that uniquely identifies the modem to which this row in the Hub Security table pertains. The value of this index matches the value of the index for the corresonding entity in the entity table of the Chassis MIB.
OBJECT-TYPE    
  INTEGER  

mdmHsDialInEnable 1.3.6.1.4.1.429.1.6.15.1.1.2
Allows the modem to be configured for dial-in security. Enabling this effectively disables the modem's built-in Link security operation. The default for this object is disabled.
OBJECT-TYPE    
  INTEGER disable(1), allowNoNMC(2), refuseNoNMC(3), busyOutNoNMC(4)  

mdmHsDialOutEnable 1.3.6.1.4.1.429.1.6.15.1.1.3
Allows modems to be configured for dial-out security. Enabling this effectively disables the modem's built-in link security operation. The default value for this object is disabled.
OBJECT-TYPE    
  INTEGER disable(1), refuseNoNMC(2), allowNoNMC(3)  

mdmHsDtrDcdDelay 1.3.6.1.4.1.429.1.6.15.1.1.4
Allows configuration of the time delay (in 100ths of a second) between reciept of DTR and assertion of DCD when the user on an incomming security call has successfully compleated the security dialog. This object only applies to modems using an RS232 like interface.
OBJECT-TYPE    
  INTEGER 0..255  

mdmHsDtrDsrDelay 1.3.6.1.4.1.429.1.6.15.1.1.5
Allows configuration of the delay (in 100ths of a second) between detection of DTR and assertion of DSR when an incomming security call has completed security negotiation successfully.
OBJECT-TYPE    
  INTEGER 0..255  

mdmAutoResponse 1.3.6.1.4.1.429.1.6.16
OBJECT IDENTIFIER    

mdmArTable 1.3.6.1.4.1.429.1.6.16.1
Table of auto response scripts for each modem in the chassis. The number of table entries is specified by modemNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmArEntry

mdmArEntry 1.3.6.1.4.1.429.1.6.16.1.1
List of configurable auto response scripts.
OBJECT-TYPE    
  MdmArEntry  

mdmArIndex 1.3.6.1.4.1.429.1.6.16.1.1.1
Index in to the auto response table. This index contains the unique value associated with the modem as defined in the chassis mib entity table.
OBJECT-TYPE    
  INTEGER  

mdmArIncomConnectEstab 1.3.6.1.4.1.429.1.6.16.1.1.2
This script is triggered when a Total Control WAN HUB modem establishes a connection with a remote modem. The remote modem is the caller.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArOutgoConnectEstab 1.3.6.1.4.1.429.1.6.16.1.1.3
This script is triggered when a Total Control WAN HUB modem establishes a connection with a remote modem. The Total Control WAN HUB modem is the caller.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArIncomConnectTerm 1.3.6.1.4.1.429.1.6.16.1.1.4
This script is triggered after a remote modem has called a Total Control WAN HUB modem, but the connection between them terminated for some reason.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArOutgoConnectTerm 1.3.6.1.4.1.429.1.6.16.1.1.5
This script is triggered after a Total Control WAN HUB modem called a remote modem, but the connection between them terminated for some reason.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArConnectAttemptFail 1.3.6.1.4.1.429.1.6.16.1.1.6
This script is triggered when a Total Control WAN HUB modem fails to connect with a remote modem for an incoming or an outgoing call.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArConnectTimeExpire 1.3.6.1.4.1.429.1.6.16.1.1.7
This script is triggered when a connection duration exceeds the user defined connection time limit.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArResetByDte 1.3.6.1.4.1.429.1.6.16.1.1.8
This script is triggered when a modem has been reset by a DTE.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDteXmitIdle 1.3.6.1.4.1.429.1.6.16.1.1.9
This script is triggered when a modem's DTE remains idle for specified amount of minutes that is defined by a user.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArBlersAtThresh 1.3.6.1.4.1.429.1.6.16.1.1.10
This script is triggered when a Total Control WAN HUB modem receives a certain amount of block errors. This amount can be configured by a user.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArFbacksAtThresh 1.3.6.1.4.1.429.1.6.16.1.1.11
This script is triggered when a Total Control WAN HUB modem reaches a certain amount of fall backs within a single session. This amount can be configured by a user.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDialOutLoginFail 1.3.6.1.4.1.429.1.6.16.1.1.12
This script is triggered when a user, who is attempting to dial out from a Total Control WAN HUB modem that supports dial security, enters an invalid response to a prompt.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDialOutRestrNum 1.3.6.1.4.1.429.1.6.16.1.1.13
This script is triggered when a user, who is attempting to dial out from a Total Control WAN HUB modem that supports dial security, uses a restricted number.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDialInLoginFail 1.3.6.1.4.1.429.1.6.16.1.1.14
This script is triggered when a user, who is attempting to dial in from a remote modem in to a Total Control WAN HUB modem that supports dial security, enters an invalid response to a prompt.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDialBackRestrNum 1.3.6.1.4.1.429.1.6.16.1.1.15
This script is triggered when a user, who is attempting to dial in from a remote modem in to a Total Control WAN HUB modem that supports dial security, requests the Total Control WAN HUB modem to dial back to a restricted number.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDialBackRestModem 1.3.6.1.4.1.429.1.6.16.1.1.16
This script is triggered when a user, who is attempting to dial in from a remote modem in to a Total Control WAN HUB modem that supports dial security, requests the Total Control WAN HUB modem to dial back using a restricted Total Control WAN HUB modem.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArLoginAttemptsExceed 1.3.6.1.4.1.429.1.6.16.1.1.17
This script is triggered when a user, who is dialing in to or out of the Total Control WAN HUB modem, exceeds the number of correct user name/password response attempts.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArUserBlacklisted 1.3.6.1.4.1.429.1.6.16.1.1.18
This script is triggered when a user, who is dialing in to or out of the Total Control WAN HUB modem, exceeds the number of password prompt retries. At this point the user becomes black listed.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArAttmpLoginByBlistUsr 1.3.6.1.4.1.429.1.6.16.1.1.19
This script is triggered when a user, who has been black listed, is trying to dial in to or out of a Total Control WAN HUB modem.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArRspAttemptLimExceed 1.3.6.1.4.1.429.1.6.16.1.1.20
This script is triggered when a user, who is dialing in to or out of a Total Control WAN HUB modem, exceeds the number of security prompt retries during a single dial security session.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArWatchdog 1.3.6.1.4.1.429.1.6.16.1.1.21
This script is triggered when a software failure has occurred on a modem.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArMgtBusFailure 1.3.6.1.4.1.429.1.6.16.1.1.22
This script is triggered when a contact with a modem, via the management bus, has been lost.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDtrTrue 1.3.6.1.4.1.429.1.6.16.1.1.23
This script is triggered when a modem's DTE transitions it DTR line from low to high and holds it high for the specified number of seconds. This amount is user configurable.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDtrFalse 1.3.6.1.4.1.429.1.6.16.1.1.24
This script is triggered when a modem's DTE transitions it DTR line from high to low and holds it low for the specified number of seconds. This amount is user configurable.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArMdmRingNoAnswer 1.3.6.1.4.1.429.1.6.16.1.1.25
This script is triggered when a Total Control WAN HUB modem, configured for auto answer, fails to answer an incoming call within a specified number of rings. This amount is user configurable.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArDteRingNoAnswer 1.3.6.1.4.1.429.1.6.16.1.1.26
This script is triggered when a DTE fials to raise DTR in response to an incoming call for a specified amount of rings. This amount is user configurable.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArNoDialTone 1.3.6.1.4.1.429.1.6.16.1.1.27
This script is triggered when a Total Control WAN HUB modem goes off hook, but detects an inadequate dial tone level on an analog phone line.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArNoLoopCurrent 1.3.6.1.4.1.429.1.6.16.1.1.28
This script is triggered when a Total Control WAN HUB modem goes off hook, but it does not detect the presence of loop current on an analog phone line.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArTimer1 1.3.6.1.4.1.429.1.6.16.1.1.29
This script is triggered when the first general purpose timer expires.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArTimer2 1.3.6.1.4.1.429.1.6.16.1.1.30
This script is triggered when the second general purpose timer expires.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArTimer3 1.3.6.1.4.1.429.1.6.16.1.1.31
This script is triggered when the third general purpose timer expires.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArTimer4 1.3.6.1.4.1.429.1.6.16.1.1.32
This script is triggered when the fourth general purpose timer expires.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArPacketBusActive 1.3.6.1.4.1.429.1.6.16.1.1.33
This script is triggered when a packet bus active event is detected by the modem.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmArPacketBusLost 1.3.6.1.4.1.429.1.6.16.1.1.34
This script is triggered when a packet bus lost event is detected by the modem.
OBJECT-TYPE    
  OCTET STRING SIZE(0..40)  

mdmCe 1.3.6.1.4.1.429.1.6.17
OBJECT IDENTIFIER    

mdmCeTable 1.3.6.1.4.1.429.1.6.17.1
A list of configurable Cellular Support object for a modem. The number of table entries is given by modemNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmCeEntry

mdmCeEntry 1.3.6.1.4.1.429.1.6.17.1.1
Objects which define the Cellular characteristics for a particular modem.
OBJECT-TYPE    
  MdmCeEntry  

mdmCeIndex 1.3.6.1.4.1.429.1.6.17.1.1.1
This index value which uniquely identifies the modem to which this entry is applicable. The value corresponds to the index of the corresponding modem in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

mdmCeMnp10Dis 1.3.6.1.4.1.429.1.6.17.1.1.2
This object is bit 0 of S-register 60. It disable/enables MNP10 negotiation mostly used with cellular operations. (defualt=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeMnpxDis 1.3.6.1.4.1.429.1.6.17.1.1.3
This object is bit 1 of S-register 60. It will enable/disable the MNP extended services to be active during negotiation. This will mean that MNP10 will use V.42 to negotiate. (defualt=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeComp 1.3.6.1.4.1.429.1.6.17.1.1.4
This object is bit 2 of S-register 60. It selects which compression type will be negotiated if allowed by other modem settings. (default =0>
OBJECT-TYPE    
  INTEGER mnp5(1), v42bis(2)  

mdmCeOperDis 1.3.6.1.4.1.429.1.6.17.1.1.5
This object is bit 3 of S-register 60. It announces that at least one end of the link will be across a cellular network. Therefore, the Dyncamic Transmit Algorithm will be active. (default=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeLinkSpeed 1.3.6.1.4.1.429.1.6.17.1.1.6
This object is bit 4 of register 60 tells the modem which speed to establish the link at. (default=0)
OBJECT-TYPE    
  INTEGER linkAtHighSpeed(1), linkAt1200BpsV22(2)  

mdmCeShortFormRules 1.3.6.1.4.1.429.1.6.17.1.1.7
This object is the S-register 61. It takes a value from 0 to 3 and regulates the V.42bis Short Form Negotiation rules. The short form assumes that the maximum string length is always 32 octets and that the direction of compression is always bi-directional. (default=0)
OBJECT-TYPE    
  INTEGER disable(1), form1CodeWords512(2), form2CodeWords1024(3), form3CodeWords2048(4)  

mdmCeDceBitraLim 1.3.6.1.4.1.429.1.6.17.1.1.8
This object is the S-register 64. It limits DCE bitrates to values equal to or below the chosen setting. (default=0)
OBJECT-TYPE    
  INTEGER maxDceRate(1), bps4800(2), bps7200(3), bps9600(4), bps12000(5), bps14400(6)  

mdmCeDceTxLev 1.3.6.1.4.1.429.1.6.17.1.1.9
This object is S-register 65. It selects DCE TX level to use during cellular operations. (default=0)
OBJECT-TYPE    
  INTEGER modemContrlTxLev(1), dBm10(2), dBm11(3), dBm12(4), dBm13(5), dBm14(6), dBm15(7), dBm16(8), dBm17(9), dBm18(10), dBm19(11), dBm20(12), dBm21(13), dBm22(14), dBm23(15), dBm24(16), dBm25(17)  

mdmCeV42EtcDis 1.3.6.1.4.1.429.1.6.17.1.1.10
This object is the bit 0 of S-register 66. It enables/disables ETC. (default=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeV42CellSite 1.3.6.1.4.1.429.1.6.17.1.1.11
This object is the bit 1 of S-register 66. It selects fixed or mobile site operations. (default=0)
OBJECT-TYPE    
  INTEGER fixedSite(1), mobileSite(2)  

mdmCeV42EtcCallToneDis 1.3.6.1.4.1.429.1.6.17.1.1.12
This object is the bit 2 of S-register 66. It enables/disables ETC calling tone. (default=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeV42EtcTxLevConDis 1.3.6.1.4.1.429.1.6.17.1.1.13
This object is the bit 3 of S-register 66. It enables/disables forced ETC TX level control. (default=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeDceStartRate 1.3.6.1.4.1.429.1.6.17.1.1.14
This object is the bits 4 and 5 of S-register 66. It sets the DCE startup rate. (default=0)
OBJECT-TYPE    
  INTEGER auto(1), bps4800(2), bps9600(3)  

mdmCeV42DceTxDemDis 1.3.6.1.4.1.429.1.6.17.1.1.15
This object is the bit 6 of S-register 66. It enables/disables DCE TX De-emphasis. (default=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeMnp10FallbackDis 1.3.6.1.4.1.429.1.6.17.1.1.16
This object is the bit 5 of S-register 60. It enables/disables MNP10 fallback. (default=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeMnp10FallforDis 1.3.6.1.4.1.429.1.6.17.1.1.17
This object is the bit 6 of S-register 60. It enables/disables MNP10 fallforward. (default=0)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeDbNoEtcDis 1.3.6.1.4.1.429.1.6.17.1.1.18
This object is the bit 7 of S-register 66. It enables/disables non-ETC originate mode. (default=0/disable)
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mdmCeMnpxDetPhEna 1.3.6.1.4.1.429.1.6.17.1.1.19
This object is the bit 7 of S-register 60. It enables/disables the MNPX detection phase during connection establishment. (default=0/enable).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

mdmSts 1.3.6.1.4.1.429.1.6.18
OBJECT IDENTIFIER    

mdmStsTable 1.3.6.1.4.1.429.1.6.18.1
A table containing configuration information for each NAC in the NAS chassis that supports packet bus datagrams.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmStsEntry

mdmStsEntry 1.3.6.1.4.1.429.1.6.18.1.1
There is one configuration row for each modem entity.
OBJECT-TYPE    
  MdmStsEntry  

mdmStsIndex 1.3.6.1.4.1.429.1.6.18.1.1.1
A unique value for each card in the chassis. The value of this object matches the value of the index of the corresponding card's entry in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

mdmStsPbClock 1.3.6.1.4.1.429.1.6.18.1.1.2
This object defines the current status of the packet bus clock.
OBJECT-TYPE    
  INTEGER notSupported(1), clockMaster(2), clockSlave(3), noClockPresent(4)  

mdmMa 1.3.6.1.4.1.429.1.6.19
OBJECT IDENTIFIER    

mdmMaTable 1.3.6.1.4.1.429.1.6.19.1
A Mapping table entry, containing objects which define the card level configuration each modem is mapped to and the unique change indicator.
OBJECT-TYPE    
  SEQUENCE OF  
    MdmMaEntry

mdmMaEntry 1.3.6.1.4.1.429.1.6.19.1.1
Objects which define the Mapping and Status for a particular modem.
OBJECT-TYPE    
  MdmMaEntry  

mdmMaIndex 1.3.6.1.4.1.429.1.6.19.1.1.1
This index value which uniquely identifies the modem to which this entry is applicable. The value corresponds to the index of the corresponding modem in the entity table of the chassis MIB.
OBJECT-TYPE    
  INTEGER  

mdmMaChangeIndicator 1.3.6.1.4.1.429.1.6.19.1.1.2
A value of changed indicates that the card level configuration for a specific channel on a HDM is not the one in use on that channel.
OBJECT-TYPE    
  INTEGER notSupported(1), cfgChanged(2), cfgUnchanged(3)  

mdmMaChannelConfig 1.3.6.1.4.1.429.1.6.19.1.1.3
Values of group(1), group(2), group(3), group(4) represent the HDM card level configuration of 1..4 used by this channel.
OBJECT-TYPE    
  INTEGER group1(1), group2(2), group3(3), group4(4)  

Defined Objects

MdmIDEntry  
SEQUENCE    
  INTEGER as mdmIDIndex  
  INTEGER as mdmIDModel  
  INTEGER as mdmIDCountry  
  DisplayString as mdmIDHardwareSerNum  
  DisplayString as mdmIDHardwareRev  
  DisplayString as mdmIDSupervisorSwRev  
  DisplayString as mdmIDDataPumpSwRev  
  DisplayString as mdmIDIoProcessorSwRev  
  DisplayString as mdmIDSupervisorDate  

MdmLiEntry  
SEQUENCE    
  INTEGER as mdmLiIndex  
  INTEGER as mdmLiDialPause  
  INTEGER as mdmLiCarrierRecDelay  
  INTEGER as mdmLiCarrierLoss  
  INTEGER as mdmLiToneDialTiming  
  INTEGER as mdmLiDteRxDataDelay  
  INTEGER as mdmLiTransmiter  
  INTEGER as mdmLiDialMode  
  INTEGER as mdmLiGuardTone  
  INTEGER as mdmLiLeasedLine  
  INTEGER as mdmLiLeasedLineRestDelay  
  INTEGER as mdmLiPulseMakeBreak  
  INTEGER as mdmLiAnswerTone  
  INTEGER as mdmLiRemoteEscGuardTime  
  INTEGER as mdmLiRemoteEscChar  
  INTEGER as mdmLiRemAccessLimit  
  DisplayString as mdmLiRemPassword0  
  DisplayString as mdmLiRemPassword1  
  INTEGER as mdmLiTransmitLevel  
  INTEGER as mdmLiSrc  

MdmDcEntry  
SEQUENCE    
  INTEGER as mdmDcIndex  
  INTEGER as mdmDcDataCompression  

MdmTfEntry  
SEQUENCE    
  INTEGER as mdmTfIndex  
  INTEGER as mdmTfTest  
  INTEGER as mdmTfTestTime  
  INTEGER as mdmTfV54  
  INTEGER as mdmTfV54Errors  
  OCTET STRING as mdmTfATG  
  INTEGER as mdmTfDialInToneTest  
  OCTET STRING as mdmTfToneTestCallRef  

MdmTfToneEntry  
SEQUENCE    
  INTEGER as mdmTfToneIndex  
  INTEGER as mdmTfTxFreq  
  INTEGER as mdmTfTxAmpl  
  INTEGER as mdmTfRxFreq  
  INTEGER as mdmTfRxAmpl  

MdmTfRspndrEntry  
SEQUENCE    
  INTEGER as mdmTfRspndrIndex  
  INTEGER as mdmTf404FarNearLvl  
  INTEGER as mdmTf404NearFarLvl  
  INTEGER as mdmTf1004FarNearLvl  
  INTEGER as mdmTf1004NearFarLvl  
  INTEGER as mdmTf2804FarNearLvl  
  INTEGER as mdmTf2804NearFarLvl  
  INTEGER as mdmTfCmsgFarNearLvl  
  INTEGER as mdmTfCmsgNearFarLvl  
  INTEGER as mdmTfCnotchFarNearLvl  
  INTEGER as mdmTfCnotchNearFarLvl  
  INTEGER as mdmtTfSigNoiseFarNearLvl  
  INTEGER as mdmtTfSigNoiseNearFarLvl  
  INTEGER as mdmTf404FarNearSts  
  INTEGER as mdmTf404NearFarSts  
  INTEGER as mdmTf1004FarNearSts  
  INTEGER as mdmTf1004NearFarSts  
  INTEGER as mdmTf2804FarNearSts  
  INTEGER as mdmTf2804NearFarSts  
  INTEGER as mdmTfCmsgFarNearSts  
  INTEGER as mdmTfCmsgNearFarSts  
  INTEGER as mdmTfCnotchFarNearSts  
  INTEGER as mdmTfCnotchNearFarSts  
  INTEGER as mdmTfSigNoiseFarNearSts  
  INTEGER as mdmTfSigNoiseNearFarSts  
  INTEGER as mdmTf0dB1004FarNearLvl  
  INTEGER as mdmTf0dB1004NearFarLvl  
  INTEGER as mdmTf0dB1004FarNearSts  
  INTEGER as mdmTf0dB1004NearFarSts  

MdmDiEntry  
SEQUENCE    
  INTEGER as mdmDiIndex  
  INTEGER as mdmDiEscCodeGuardTime  
  INTEGER as mdmDiLocalEscChar  
  INTEGER as mdmDiCarriageRetChar  
  INTEGER as mdmDiLineFeedChar  
  INTEGER as mdmDiBackspaceChar  
  INTEGER as mdmDiDelAsBackspace  
  INTEGER as mdmDiResetOnDtrEna  
  INTEGER as mdmDiResultCodePauseDis  
  INTEGER as mdmDiInterbridgeEna  
  INTEGER as mdmDiBreakLen  
  INTEGER as mdmDiXonChar  
  INTEGER as mdmDiXoffChar  
  INTEGER as mdmDiDsrPulseTime  
  INTEGER as mdmDiRtsCtsDelay  
  INTEGER as mdmDiHiSpeedResCodeEna  
  INTEGER as mdmDiCmdLocalEchoEna  
  INTEGER as mdmDiDataModeEchoEna  
  INTEGER as mdmDiDteDataRateMode  
  INTEGER as mdmDiCdOverride  
  INTEGER as mdmDiDtrOverride  
  INTEGER as mdmDiDsrOverride  
  INTEGER as mdmDiEiaLineStatus  
  INTEGER as mdmDiTransmitFlowCntl  
  INTEGER as mdmDiSoftwareRxFlowCntl  
  INTEGER as mdmDiHardwareRxFlowCntl  
  INTEGER as mdmDiBreakHandling  
  INTEGER as mdmDiDteNvramLock  
  INTEGER as mdmDiSerialFormat  
  INTEGER as mdmDiDefaultDteDataRate  
  INTEGER as mdmDiRemAccessMsg  
  INTEGER as mdmDiV25DteDataRate  
  INTEGER as mdmDiSrc  
  INTEGER as mdmDiSlot  
  INTEGER as mdmDiBusyClock  
  DisplayString as mdmDiAtString  
  INTEGER as mdmDiDtrRecognitionTime  

MdmScEntry  
SEQUENCE    
  INTEGER as mdmScIndex  
  INTEGER as mdmScLinkRateSelect  
  INTEGER as mdmScNonArqBufSize  
  INTEGER as mdmScNonMnpDataCapture  
  INTEGER as mdmScSyncTimingSource  
  INTEGER as mdmScHstMod  
  INTEGER as mdmScHiFreqEq  
  INTEGER as mdmScBackChanRate  
  INTEGER as mdmScV21Mod  
  INTEGER as mdmScV32UnencodedMod  
  INTEGER as mdmScV32Mod  
  INTEGER as mdmScBell208  
  INTEGER as mdmScV32Bis  
  INTEGER as mdmScV32BisEnhance  
  INTEGER as mdmScV32QuickRetrain  
  INTEGER as mdmScV23  
  INTEGER as mdmScHiSpeedModulation  
  INTEGER as mdmScFallback  
  INTEGER as mdmScV32TerboModeEnable  
  INTEGER as mdmScV34ModeEnable  
  INTEGER as mdmScVFCSymRate2400  
  INTEGER as mdmScVFCSymRate2743  
  INTEGER as mdmScVFCSymRate2800  
  INTEGER as mdmScVFCSymRate3000  
  INTEGER as mdmScVFCSymRate3200  
  INTEGER as mdmScVFCSymRate3429  
  INTEGER as mdmScVFC8S2DMapping  
  INTEGER as mdmScVFC16S4DMapping  
  INTEGER as mdmScVFC32S2DMapping  
  INTEGER as mdmScVFC64S4DMapping  
  INTEGER as mdmScVFCNonLinearCoding  
  INTEGER as mdmScVFCTxLevelDeviation  
  INTEGER as mdmScVFCPreEmphasis  
  INTEGER as mdmScVFCPreCoding  
  INTEGER as mdmScVFCShaping  
  INTEGER as mdmScVFCModeEnable  
  INTEGER as mdmScV8  
  INTEGER as mdmSCV8CallIndicator  
  INTEGER as mdmScV34pModeEnable  
  INTEGER as mdmSc300  
  INTEGER as mdmSc1200  
  INTEGER as mdmSc2400  
  INTEGER as mdmScHighSpeed  
  INTEGER as mdmScSelectiveReject  
  INTEGER as mdmScPhExclusionDel  
  INTEGER as mdmScLinkRateAmpU  
  INTEGER as mdmScLowerSpeedMin  
  INTEGER as mdmScLowerSpeedMax  
  INTEGER as mdmScX2Client  
  INTEGER as mdmScX2Server  
  INTEGER as mdmScX2Symmetric  
  INTEGER as mdmScX2HighPowerConst  
  INTEGER as mdmScPiafs  
  INTEGER as mdmScPiafsV42bis  
  INTEGER as mdmScTxPwrLvl  
  INTEGER as mdmScTxPwrLvlApplied  
  INTEGER as mdmScX2Version2  
  INTEGER as mdmScV34Fallback  
  INTEGER as mdmScV90Analogue  
  INTEGER as mdmScV90Digital  
  INTEGER as mdmScV90AllDigital  

MdmCcEntry  
SEQUENCE    
  INTEGER as mdmCcIndex  
  INTEGER as mdmCcDialDelay  
  INTEGER as mdmCcWaitForCarrier  
  INTEGER as mdmCcInactivityTimer  
  INTEGER as mdmCcAutoDialOnDtrEna  
  INTEGER as mdmCcAutoDialOnPwrUpEna  
  INTEGER as mdmCcGhostPortLockEna  
  INTEGER as mdmCcQuietResultCodes  
  INTEGER as mdmCcResponseMode  
  INTEGER as mdmCcResultCodeOptions  
  INTEGER as mdmCcArqResultCodeMode  
  INTEGER as mdmCcEscCodeRsp  
  INTEGER as mdmCcAtRecognition  
  INTEGER as mdmCcMgmtSysMsgDis  
  INTEGER as mdmCcV32ToneDuration  
  INTEGER as mdmCcAutoAnswer  
  INTEGER as mdmCcAnswerInOrigMode  
  INTEGER as mdmCcArqBufWait  
  DisplayString as mdmCcPhoneString0  
  DisplayString as mdmCcPhoneString1  
  DisplayString as mdmCcPhoneString2  
  DisplayString as mdmCcPhoneString3  
  INTEGER as mdmCcErrorCntlMode  
  INTEGER as mdmCcMiMic  
  INTEGER as mdmCcMnpWith1200  
  INTEGER as mdmCcMnpWith2400  
  INTEGER as mdmCcMnpWithV32  
  INTEGER as mdmCcMnpTimeout  
  INTEGER as mdmCcV21V23FallBackTimer  
  INTEGER as mdmCcAddnlAnswToneDur  
  INTEGER as mdmCcBillingDelayPeriod  
  DisplayString as mdmCcCarrierAccessCode1  
  DisplayString as mdmCcCarrierAccessCode2  
  DisplayString as mdmCcCarrierAccessCode3  
  DisplayString as mdmCcCallingInitStr1  
  DisplayString as mdmCcCallingInitStr2  
  DisplayString as mdmCcCallingInitStr3  
  DisplayString as mdmCcCallingInitStr4  
  INTEGER as mdmCcDataFaxMode  
  INTEGER as mdmCcT1CallSetupProc  
  INTEGER as mdmCcT1DialToneType  
  INTEGER as mdmCcT1KpStMfTones  
  INTEGER as mdmCcT1CallInitStrUse  
  INTEGER as mdmCcT1CallInitStrBase  
  INTEGER as mdmCcIntBlackListDis  
  INTEGER as mdmCcOffHookRestrict  
  INTEGER as mdmCcT1DialInAniDig  
  INTEGER as mdmCcT1DialInDnisDig  
  INTEGER as mdmCcNoPbNoConnEna  
  INTEGER as mdmCcIdleDiscPatt  
  INTEGER as mdmCcMnp10  
  INTEGER as mdmCcMnp10Ec  
  INTEGER as mdmCcAtzPbHandling  
  INTEGER as mdmCcDefltPRISlot  
  INTEGER as mdmCcExtDTMFToneSupport  
  INTEGER as mdmCcDataOverVoice  
  INTEGER as mdmCc2100AnswerTone  
  INTEGER as mdmCcEnableV120v42Bis  
  INTEGER as mdmCcHdlcLicIe  
  INTEGER as mdmCcDtmfTerminationTone  
  INTEGER as mdmCcAfaxMaxRateSrvOpt20  
  INTEGER as mdmCcAfaxMaxRateSrvOpt21  

MdmEcEntry  
SEQUENCE    
  INTEGER as mdmEcIndex  
  INTEGER as mdmEcMnp3Dis  
  INTEGER as mdmEcMnp4Dis  
  INTEGER as mdmEcMnpUnusual  
  INTEGER as mdmEcV42MnpHandshake  

MdmCsEntry  
SEQUENCE    
  INTEGER as mdmCsIndex  
  INTEGER as mdmCsStatus  
  DisplayString as mdmCsLastNumberDialedOut  
  DisplayString as mdmCsLastNumberDialedIn  
  DisplayString as mdmCsLastCallingPartyNum  
  INTEGER as mdmCsOriginateAnswer  
  INTEGER as mdmCsRings  
  INTEGER as mdmCsDisconnectReason  
  INTEGER as mdmCsConnectFailReason  
  INTEGER as mdmCsInitialTxLinkRate  
  INTEGER as mdmCsInitialRxLinkRate  
  INTEGER as mdmCsFinalTxLinkRate  
  INTEGER as mdmCsFinalRxLinkRate  
  INTEGER as mdmCsModulationType  
  INTEGER as mdmCsSyncAsyncModeUsed  
  INTEGER as mdmCsErrorControlType  
  INTEGER as mdmCsCompressionType  
  INTEGER as mdmCsEqualizationType  
  INTEGER as mdmCsFallbackEnabled  
  INTEGER as mdmCsCharsSent  
  INTEGER as mdmCsCharsReceived  
  INTEGER as mdmCsOctetsSent  
  INTEGER as mdmCsOctetsReceived  
  INTEGER as mdmCsBlocksSent  
  INTEGER as mdmCsBlocksReceived  
  INTEGER as mdmCsBlocksResent  
  INTEGER as mdmCsRetrainsRequested  
  INTEGER as mdmCsRetrainsGranted  
  INTEGER as mdmCsLineReversalQty  
  INTEGER as mdmCsCharsLost  
  INTEGER as mdmCsBackChannelRate  
  INTEGER as mdmCsBlerQty  
  INTEGER as mdmCsLinkTimeoutQty  
  INTEGER as mdmCsFallbackQty  
  INTEGER as mdmCsUpshiftQty  
  INTEGER as mdmCsLinkNakQty  
  INTEGER as mdmCsGainHitCount  
  DisplayString as mdmCsSecurityUserName  
  DisplayString as mdmCsCallDuration  
  INTEGER as mdmCsCallRefNum  
  INTEGER as mdmCsPriCardSlot  
  INTEGER as mdmCsTDMTimeSlot  
  INTEGER as mdmCsPriCardSpanLine  
  INTEGER as mdmCsBChannelUsed  
  INTEGER as mdmCsQCarrFreqTx  
  INTEGER as mdmCsQCarrFreqRx  
  INTEGER as mdmCsQSymRateTx  
  INTEGER as mdmCsQSymRateRx  
  INTEGER as mdmCsQTrellisTx  
  INTEGER as mdmCsQTrellisRx  
  INTEGER as mdmCsQNonLinCdTx  
  INTEGER as mdmCsQNonLinCdRx  
  INTEGER as mdmCsQPrecodingTx  
  INTEGER as mdmCsQPrecodingRx  
  INTEGER as mdmCsQShapingTx  
  INTEGER as mdmCsQShapingRx  
  INTEGER as mdmCsQPreemphTx  
  INTEGER as mdmCsQPreemphRx  
  INTEGER as mdmCsQRxLevel  
  INTEGER as mdmCsQTxLevel  
  INTEGER as mdmCsQSNR  
  INTEGER as mdmCsQNearEcho  
  INTEGER as mdmCsQFarEcho  
  INTEGER as mdmCsQRndTripDly  
  INTEGER as mdmCsQPacketSizeCurr  
  INTEGER as mdmCsQPacketSizeLow  
  INTEGER as mdmCsQPacketSizeHigh  
  INTEGER as mdmCsQCellTxLevelCurr  
  INTEGER as mdmCsQCellTxLevelLow  
  INTEGER as mdmCsQCellTxLevelHigh  
  INTEGER as mdmCsQSNRLevelCurr  
  INTEGER as mdmCsQSNRLevelLow  
  INTEGER as mdmCsQSNRLevelHigh  
  INTEGER as mdmCsQCellularProt  
  OCTET STRING as mdmCsFreqProbeData  
  OCTET STRING as mdmCsLevelProbeData  
  INTEGER as mdmCsQTimingOffset  
  INTEGER as mdmCsQCarrierOffset  
  INTEGER as mdmCsQCoding  
  OCTET STRING as mdmCsTrainingInfo  
  OCTET STRING as mdmCsX2signature  
  INTEGER as mdmCsX2Status  
  INTEGER as mdmCsCallType  
  INTEGER as mdmCsCallStartTime  
  INTEGER as mdmCsCallEndTime  
  INTEGER as mdmCsDigitalPadAttenuated  
  INTEGER as mdmCsInitModulationType  
  INTEGER as mdmCsRxMinSpeed  
  INTEGER as mdmCsRxMaxSpeed  
  INTEGER as mdmCsTxMinSpeed  
  INTEGER as mdmCsTxMaxSpeed  
  OCTET STRING as mdmCsCollectedDTMFDigits  

MdmEvEntry  
SEQUENCE    
  INTEGER as mdmEvIndex  
  Counter as mdmEvWatchdogTimouts  
  Counter as mdmEvDteIdleTimouts  
  Counter as mdmEvInConnectEstabs  
  Counter as mdmEvOutConnectEstabs  
  Counter as mdmEvInConnectTerms  
  Counter as mdmEvOutConnectTerms  
  Counter as mdmEvConnectAttemptFails  
  Counter as mdmEvConnectTimouts  
  Counter as mdmEvMgmtBusFailures  
  Counter as mdmEvResetByDtes  
  Counter as mdmEvDtrFalses  
  Counter as mdmEvDtrTrues  
  Counter as mdmEvNoTones  
  Counter as mdmEvNoLoops  
  Counter as mdmEvBlers  
  Counter as mdmEvFallBacks  
  Counter as mdmEvInConnectTime  
  Counter as mdmEvInTotalBytesRx  
  Counter as mdmEvInTotalBytesTx  
  Counter as mdmEvOutConnectTime  
  Counter as mdmEvOutTotalBytesRx  
  Counter as mdmEvOutTotalBytesTx  
  Counter as mdmEvInConnAttemptFails  
  Counter as mdmEvOutConnAttemptFails  

MdmEtEntry  
SEQUENCE    
  INTEGER as mdmEtIndex  
  INTEGER as mdmEtDteIdleThresh  
  INTEGER as mdmEtDtrFalseThresh  
  INTEGER as mdmEtDtrTrueThresh  
  INTEGER as mdmEtConnTimeLimit  
  INTEGER as mdmEtBlerThresh  
  INTEGER as mdmEtFallbackThresh  

MdmCdEntry  
SEQUENCE    
  INTEGER as mdmCdIndex  
  OCTET STRING as mdmCdMgtStationId  
  INTEGER as mdmCdReqId  
  INTEGER as mdmCdFunction  
  INTEGER as mdmCdForce  
  OCTET STRING as mdmCdParam  
  INTEGER as mdmCdResult  
  INTEGER as mdmCdCode  

MdmTeEntry  
SEQUENCE    
  INTEGER as mdmTeIndex  
  INTEGER as mdmTeInConnEstablished  
  INTEGER as mdmTeOutConnEstablished  
  INTEGER as mdmTeInConnTerminated  
  INTEGER as mdmTeOutConnTerminated  
  INTEGER as mdmTeConnAttemptFailure  
  INTEGER as mdmTeConnLimitExpired  
  INTEGER as mdmTeDteXmitDataIdle  
  INTEGER as mdmTeDtrTrue  
  INTEGER as mdmTeDtrFalse  
  INTEGER as mdmTeBlerCountAtThresh  
  INTEGER as mdmTeFallbkCountAtThresh  
  INTEGER as mdmTeNoDialTone  
  INTEGER as mdmTeNoLoopCurrent  
  INTEGER as mdmTeResetByDTE  
  INTEGER as mdmTeDialOutCallDur  
  INTEGER as mdmTeDialInCallDur  
  INTEGER as mdmTePbActive  
  INTEGER as mdmTePbLost  
  INTEGER as mdmTeDteRingNoAns  
  INTEGER as mdmTePbClockLossEvent  
  INTEGER as mdmTePbClockRestoreEvent  
  INTEGER as mdmTeInConnAttemptFail  
  INTEGER as mdmTeOutConnAttemptFail  
  INTEGER as mdmTe105ResponderTest  

MdmLsTableEntry  
SEQUENCE    
  INTEGER as mdmLsIndex  
  INTEGER as mdmLsSecurityEnable  
  INTEGER as mdmLsFallbackPromptEnable  
  INTEGER as mdmLsForcePromptEnable  
  INTEGER as mdmLsLocAccPasswdEnable  
  INTEGER as mdmLsDialBackEnable  
  DisplayString as mdmLsAutoPassPasswd  
  DisplayString as mdmLsLocalAccessPasswd  
  DisplayString as mdmLsAccountPasswd  

MdmHsEntry  
SEQUENCE    
  INTEGER as mdmHsIndex  
  INTEGER as mdmHsDialInEnable  
  INTEGER as mdmHsDialOutEnable  
  INTEGER as mdmHsDtrDcdDelay  
  INTEGER as mdmHsDtrDsrDelay  

MdmArEntry  
SEQUENCE    
  INTEGER as mdmArIndex  
  OCTET STRING as mdmArIncomConnectEstab  
  OCTET STRING as mdmArOutgoConnectEstab  
  OCTET STRING as mdmArIncomConnectTerm  
  OCTET STRING as mdmArOutgoConnectTerm  
  OCTET STRING as mdmArConnectAttemptFail  
  OCTET STRING as mdmArConnectTimeExpire  
  OCTET STRING as mdmArResetByDte  
  OCTET STRING as mdmArDteXmitIdle  
  OCTET STRING as mdmArBlersAtThresh  
  OCTET STRING as mdmArFbacksAtThresh  
  OCTET STRING as mdmArDialOutLoginFail  
  OCTET STRING as mdmArDialOutRestrNum  
  OCTET STRING as mdmArDialInLoginFail  
  OCTET STRING as mdmArDialBackRestrNum  
  OCTET STRING as mdmArDialBackRestModem  
  OCTET STRING as mdmArLoginAttemptsExceed  
  OCTET STRING as mdmArUserBlacklisted  
  OCTET STRING as mdmArAttmpLoginByBlistUsr  
  OCTET STRING as mdmArRspAttemptLimExceed  
  OCTET STRING as mdmArWatchdog  
  OCTET STRING as mdmArMgtBusFailure  
  OCTET STRING as mdmArDtrTrue  
  OCTET STRING as mdmArDtrFalse  
  OCTET STRING as mdmArMdmRingNoAnswer  
  OCTET STRING as mdmArDteRingNoAnswer  
  OCTET STRING as mdmArNoDialTone  
  OCTET STRING as mdmArNoLoopCurrent  
  OCTET STRING as mdmArTimer1  
  OCTET STRING as mdmArTimer2  
  OCTET STRING as mdmArTimer3  
  OCTET STRING as mdmArTimer4  
  OCTET STRING as mdmArPacketBusActive  
  OCTET STRING as mdmArPacketBusLost  

MdmCeEntry  
SEQUENCE    
  INTEGER as mdmCeIndex  
  INTEGER as mdmCeMnp10Dis  
  INTEGER as mdmCeMnpxDis  
  INTEGER as mdmCeComp  
  INTEGER as mdmCeOperDis  
  INTEGER as mdmCeLinkSpeed  
  INTEGER as mdmCeShortFormRules  
  INTEGER as mdmCeDceBitraLim  
  INTEGER as mdmCeDceTxLev  
  INTEGER as mdmCeV42EtcDis  
  INTEGER as mdmCeV42CellSite  
  INTEGER as mdmCeV42EtcCallToneDis  
  INTEGER as mdmCeV42EtcTxLevConDis  
  INTEGER as mdmCeDceStartRate  
  INTEGER as mdmCeV42DceTxDemDis  
  INTEGER as mdmCeMnp10FallbackDis  
  INTEGER as mdmCeMnp10FallforDis  
  INTEGER as mdmCeDbNoEtcDis  
  INTEGER as mdmCeMnpxDetPhEna  

MdmStsEntry  
SEQUENCE    
  INTEGER as mdmStsIndex  
  INTEGER as mdmStsPbClock  

MdmMaEntry  
SEQUENCE    
  INTEGER as mdmMaIndex  
  INTEGER as mdmMaChangeIndicator  
  INTEGER as mdmMaChannelConfig