MICOM-CSU-MIB

File: MICOM-CSU-MIB.mib (49023 bytes)

Imported modules

RFC-1212 MICOM-SYS-MIB RFC-1215
SNMPv2-TC MICOM-OSCAR-MIB

Imported symbols

OBJECT-TYPE mcmSysAsciiTimeOfDay TRAP-TYPE
DisplayString micom-oscar

Defined Objects

micom-csu 1.3.6.1.4.1.335.1.4.29
OBJECT IDENTIFIER    

csu-configuration 1.3.6.1.4.1.335.1.4.29.1
OBJECT IDENTIFIER    

mcmT1CsuRedAlarmSet 1.3.6.1.4.1.335.1.4.29.1
NAME = ; DESC = When a downstream node detects a loss of \ synchronization in its receive pair of a \ T1 line, it is in red alarm condition. \ Severity Level: CRITICAL.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmT1E1CsuCfgTable 1.3.6.1.4.1.335.1.4.29.1.1
NAME = ; DESC = The T1/E1 CSU Configuration table.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  SEQUENCE OF  
    McmT1E1CsuCfgEntry

mcmT1E1CsuCfgEntry 1.3.6.1.4.1.335.1.4.29.1.1.1
NAME = ; DESC = An entry in the T1/E1 CSU Configuration \ table.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  McmT1E1CsuCfgEntry  

mcmT1E1CsuCfgifIndex 1.3.6.1.4.1.335.1.4.29.1.1.1.1
NAME = ; DESC = The T1E1 Csu Cfg interface index \ value of the specifc entry.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 1..255  

mcmT1E1CsuCfgLineType 1.3.6.1.4.1.335.1.4.29.1.1.1.2
NAME = ; DESC = The value of this object determines \ whether the line is a T1 CSU or E1 CSU.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER t1Csu(1), e1Csu(2)  

mcmT1E1CsuCfgLineSpeed 1.3.6.1.4.1.335.1.4.29.1.1.1.3
NAME = ; DESC = The value of this object indicates the T1/E1 CSU \ total configured DS0 line speed.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER ls-1ds0Times64K-64K(1), ls-2ds0Times64K-128K(2), ls-3ds0Times64K-192K(3), ls-4ds0Times64K-256K(4), ls-5ds0Times64K-320K(5), ls-6ds0Times64K-384K(6), ls-7ds0Times64K-448K(7), ls-8ds0Times64K-512K(8), ls-9ds0Times64K-576K(9), ls-10ds0Times64K-640K(10), ls-11ds0Times64K-704K(11), ls-12ds0Times64K-768K(12), ls-13ds0Times64K-832K(13), ls-14ds0Times64K-896K(14), ls-15ds0Times64K-960K(15), ls-16ds0Times64K-1024K(16), ls-17ds0Times64K-1088K(17), ls-18ds0Times64K-1152K(18), ls-19ds0Times64K-1216K(19), ls-20ds0Times64K-1280K(20), ls-21ds0Times64K-1344K(21), ls-22ds0Times64K-1408K(22), ls-23ds0Times64K-1472K(23), ls-24ds0Times64K-1536K(24), ls-25ds0Times64K-1600K(25), ls-26ds0Times64K-1664K(26), ls-27ds0Times64K-1728K(27), ls-28ds0Times64K-1792K(28), ls-29ds0Times64K-1856K(29), ls-30ds0Times64K-1920K(30), ls-1ds0Times56K-56K(31), ls-2ds0Times56K-112K(32), ls-3ds0Times56K-168K(33), ls-4ds0Times56K-224K(34), ls-5ds0Times56K-280K(35), ls-6ds0Times56K-336K(36), ls-7ds0Times56K-392K(37), ls-8ds0Times56K-448K(38), ls-9ds0Times56K-504K(39), ls-10ds0Times56K-560K(40), ls-11ds0Times56K-616K(41), ls-12ds0Times56K-672K(42), ls-13ds0Times56K-728K(43), ls-14ds0Times56K-784K(44), ls-15ds0Times56K-840K(45), ls-16ds0Times56K-896K(46), ls-17ds0Times56K-952K(47), ls-18ds0Times56K-1008K(48), ls-19ds0Times56K-1064K(49), ls-20ds0Times56K-1120K(50), ls-21ds0Times56K-1176K(51), ls-22ds0Times56K-1232K(52), ls-23ds0Times56K-1288K(53), ls-24ds0Times56K-1344K(54), ls-25ds0Times56K-1400K(55), ls-26ds0Times56K-1456K(56), ls-27ds0Times56K-1512K(57), ls-28ds0Times56K-1568K(58), ls-29ds0Times56K-1624K(59), ls-30ds0Times56K-1680K(60), idle(61)  

mcmT1E1CsuCfgLineBuildOut 1.3.6.1.4.1.335.1.4.29.1.1.1.4
NAME = ; DESC = The value of this object selects the T1/E1 CSU \ line build out. For a T1 CSU, the default value \ is neg-7pt5-db (6). For an E1 CSU, the default \ value is either ohm-75-normal (9) (an E1 CSU interface \ with 2 BNC connectors) or ohm-120-normal (10) \ (an E1 CSU interface with an RJ48 connector). \ Note that the ranges of enumeration values 1-8 and \ 9-15 apply uniquely to T1 and E1 interfaces; respectively.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER dist-0-133-feet(1), dist-133-266-feet(2), dist-266-399-feet(3), dist-399-533-feet(4), dist-533-655-feet(5), neg-7pt5-db(6), neg-15-db(7), neg-22pt5-db(8), ohm-75-normal(9), ohm-120-normal(10), ohm-75-protection-resistors(11), ohm-120-protection-resistors(12), ohm-75-high-return-loss-1-1pt15-step-up(13), ohm-75-high-return-loss-1-1pt36-step-up(14), ohm-120-high-return-loss-1-1pt36-step-up(15)  

mcmT1E1CsuCfgTxIdleCode 1.3.6.1.4.1.335.1.4.29.1.1.1.5
NAME = ; DESC = The value of this object selects the T1/E1 CSU \ transmit idle code. For a T1 CSU, the default value is \ hex 0x7F. For an E1 CSU, the default value is hex 0x55.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 0..'ff'h  

mcmT1E1CsuCfgTxRxClkSource 1.3.6.1.4.1.335.1.4.29.1.1.1.6
NAME = ; DESC = The value of this object selects the T1/E1 CSU \ line clocking source.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER internalClockingSource(1), externalClockingSource(2)  

mcmT1E1CsuCfgDS0BasicRate 1.3.6.1.4.1.335.1.4.29.1.1.1.7
NAME = ; DESC = The value of this object selects the T1/E1 CSU \ line speed to be a multiple of the specified \ basic rate. E.g., Line Speed 256K = 4 x 64K.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER br64K-basicRate(1), br56K-basicRate(2)  

mcmT1E1CsuCfgLocalLoopback 1.3.6.1.4.1.335.1.4.29.1.1.1.8
NAME = ; DESC = The value of this object selects the T1/E1 CSU \ local loopback.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgRemoteLoopback 1.3.6.1.4.1.335.1.4.29.1.1.1.9
NAME = ; DESC = The value of this object selects the T1/E1 CSU \ remote loopback.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgFramerLoopback 1.3.6.1.4.1.335.1.4.29.1.1.1.10
NAME = ; DESC = The value of this object selects the T1/E1 CSU \ framer loopback.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgTrapEnable 1.3.6.1.4.1.335.1.4.29.1.1.1.11
NAME = ; DESC = The value of this object selects whether the T1/E1 \ CSU traps should be generated for this interface.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgFrameFmt 1.3.6.1.4.1.335.1.4.29.1.1.1.12
NAME = ; DESC = The value of this object selects the T1 CSU \ frame format. \ Note that for an E1 CSU interface, this object is not used.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER d4FramingMode(1), esfFramingMode(2)  

mcmT1E1CsuCfgTxRx0CodeSuppress 1.3.6.1.4.1.335.1.4.29.1.1.1.13
NAME = ; DESC = The value of this object selects zero \ code suppression for a T1 CSU interface. \ Note that for an E1 CSU interface, this object is not used.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable-b8zs(1), enable-b8zs(2)  

mcmT1E1CsuCfgTxB7ZeroSuppress 1.3.6.1.4.1.335.1.4.29.1.1.1.14
NAME = ; DESC = The value of this object selects bit 7 zero\ suppression for a T1 CSU interface. Selects stuffing \ bit 7 to 1 if 8 consecutive zeros occurred. \ Note that for an E1 CSU interface, this object is not used.; HELP = b7zsDisable (1): no stuffing occurred. \ b7zsEnable (2): bit 7 forced to a one in \ channels with all zeros.; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable-b7zs(1), enable-b7zs(2)  

mcmT1E1CsuCfgPayloadLoopback 1.3.6.1.4.1.335.1.4.29.1.1.1.15
NAME = ; DESC = The value of this object selects the T1 CSU \ payload loopback. \ Note that for an E1 CSU interface, this object is not used.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgTransmitLoopUp 1.3.6.1.4.1.335.1.4.29.1.1.1.16
NAME = ; DESC = The value of this object selects the T1 CSU \ transmit loop up. \ Note that for an E1 CSU interface, this object is not used.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgTransmitLoopDown 1.3.6.1.4.1.335.1.4.29.1.1.1.17
NAME = ; DESC = The value of this object selects the T1 CSU \ transmit loop down. \ Note that for an E1 CSU interface, this object is not used.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgTxRxHDB3 1.3.6.1.4.1.335.1.4.29.1.1.1.18
NAME = ; DESC = The value of this object selects the E1 CSU HDB3. \ Note that for a T1 CSU interface, this object is not used.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgTxRxCRC4 1.3.6.1.4.1.335.1.4.29.1.1.1.19
NAME = ; DESC = The value of this object selects the E1 CSU CRC4. \ Note that for a T1 CSU interface, this object is not used.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

mcmT1E1CsuCfgDS0Connection 1.3.6.1.4.1.335.1.4.29.1.1.1.20
NAME = ; DESC = The value of this object selects the DS0 \ channels for the T1/E1 CSU line connection. \ Valid characters are decimal digits, comma \ (','), and hyphen ('-').; HELP = Comma (',') is used as a delimiter between \ individual channel selections. \ e.g., 13,16 means DS0 channels 13 and 16. \ Hyphen ('-') is used only in Set operations \ to indicate a range of DS0 channels. \ e.g., 2,5-8 means DS0 channels 2,5,6,7, and 8.; CAPABILITIES = ;
OBJECT-TYPE    
  DisplayString SIZE(0..83)  

mcmCsuCfgTable 1.3.6.1.4.1.335.1.4.29.1.2
NAME = ; DESC = The 56K CSU Configuration table.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;
OBJECT-TYPE    
  SEQUENCE OF  
    McmCsuCfgEntry

mcmCsuCfgEntry 1.3.6.1.4.1.335.1.4.29.1.2.1
NAME = ; DESC = An entry in the 56K CSU Configuration \ table.); HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  McmCsuCfgEntry  

mcmCsuCfgifIndex 1.3.6.1.4.1.335.1.4.29.1.2.1.1
NAME = ; DESC = The 56k Csu Cfg interface index \ value of the specifc entry.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 1..255  

mcmCsuCfgOperatingMode 1.3.6.1.4.1.335.1.4.29.1.2.1.2
NAME = ; DESC = The value of this object selects the 56K CSU \ operating mode.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER dds-pri-4Wire-56k(1), dds-sc-WithSecondaryChannel-72k(2), cc-64k-ClearChannel-64k(3), dds-pri-2Wire-56k(4)  

mcmCsuCfgClockingSource 1.3.6.1.4.1.335.1.4.29.1.2.1.3
NAME = ; DESC = The value of this object selects the 56K CSU \ clocking source.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER externalClock(1), internalClock(2)  

mcmCsuCfgTxOutOfFrame 1.3.6.1.4.1.335.1.4.29.1.2.1.4
NAME = ; DESC = This object selects transmission of the 56K CSU \ Out Of Frame sequence for DDS-PRI mode, or \ transmission of Multiplexer Out Of Sync \ sequence for DDS-SC mode.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitOutOfFrame(2)  

mcmCsuCfgTxOutOfService 1.3.6.1.4.1.335.1.4.29.1.2.1.5
NAME = ; DESC = This object selects transmission of the 56K CSU \ Out Of Service sequence for DDS-PRI mode, or \ transmission of Abnormal Station Code \ sequence for DDS-SC mode.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitOutOfService(2)  

mcmCsuCfgTxControlModeIdle 1.3.6.1.4.1.335.1.4.29.1.2.1.6
NAME = ; DESC = This object selects transmission of the 56K CSU \ Control Mode Idle sequence.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitControlModeIdle(2)  

mcmCsuCfgZeroSuppressDisable 1.3.6.1.4.1.335.1.4.29.1.2.1.7
NAME = ; DESC = This object selects the 56K CSU disable \ transmit Zero Suppression for DDS-PRI mode, \ or transmission of all zeros for DDS-SC mode.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), zeroSuppressionDisable(2)  

mcmCsuCfgTxIdle 1.3.6.1.4.1.335.1.4.29.1.2.1.8
NAME = ; DESC = This object selects transmission of the 56K CSU \ All Marks (or 1s) of the Data Mode Idle sequence \ for all the modes.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER normalTransmitCondition(1), transmitIdle(2)  

mcmCsuCfgCSULoopback 1.3.6.1.4.1.335.1.4.29.1.2.1.9
NAME = ; DESC = This object selects the 56K CSU to force the CSU \ to be in a loopback mode.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER normalReceiveCondition(1), forceCSUtoLoopback(2)  

mcmCsuCfgFilterForceEnable 1.3.6.1.4.1.335.1.4.29.1.2.1.10
NAME = ; DESC = This object selects the 56K CSU to have \ filter forcing enabled or not.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER normalReceiveCondition(1), filterForceEnable(2)  

mcmCsuCfgFilterForcingCntl 1.3.6.1.4.1.335.1.4.29.1.2.1.11
NAME = ; DESC = This object selects the 56K CSU filter \ gain if filter force is enabled.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER fg90db-FilterGain(1), fg84db-FilterGain(2), fg78db-FilterGain(3), fg72db-FilterGain(4), fg66db-FilterGain(5), fg60db-FilterGain(6), fg54db-FilterGain(7), fg48db-FilterGain(8), fg42db-FilterGain(9), fg36db-FilterGain(10), fg30db-FilterGain(11), fg24db-FilterGain(12), fg18db-FilterGain(13), fg12db-FilterGain(14), fg6db-FilterGain(15), fg0db-FilterGain(16)  

csu-status 1.3.6.1.4.1.335.1.4.29.2
OBJECT IDENTIFIER    

mcmT1CsuRedAlarmClear 1.3.6.1.4.1.335.1.4.29.2
NAME = ; DESC = When a downstream node is back in \ synchronization with its receive pair \ of a T1 line. This trap clears the node \ that has the Red Alarm condition. \ Severity Level : INFORMATIVE.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmT1E1CsuCntlRegStatusTable 1.3.6.1.4.1.335.1.4.29.2.1
NAME = ; DESC = The T1/E1 CSU Control Register Status \ table.; HELP = ; CAPABILITIES = NET_DISP, VPN_DISP;
OBJECT-TYPE    
  SEQUENCE OF  
    McmT1E1CsuCntlRegStatusEntry

mcmT1E1CsuCntlRegStatusEntry 1.3.6.1.4.1.335.1.4.29.2.1.1
NAME = ; DESC = An entry in the T1/E1 CSU Control Register \ Status table.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  McmT1E1CsuCntlRegStatusEntry  

mcmT1E1CSUStatusifIndex 1.3.6.1.4.1.335.1.4.29.2.1.1.1
NAME = ; DESC = The T1E1 CSU Status interface index \ value of the specifc entry.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 1..255  

mcmT1E1CSUStatusCntlReg1 1.3.6.1.4.1.335.1.4.29.2.1.1.2
NAME = ; DESC = The value of this object indicates RCR1, the \ value of Receive Control Register 1 for a T1/E1 \ CSU line type.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg2 1.3.6.1.4.1.335.1.4.29.2.1.1.3
NAME = ; DESC = The value of this object indicates RCR2, the \ value of Receive Control Register 2 for a T1/E1 \ CSU line type.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg3 1.3.6.1.4.1.335.1.4.29.2.1.1.4
NAME = ; DESC = The value of this object indicates TCR1, the \ value of Transmit Control Register 1 for a T1/E1 \ CSU line type.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg4 1.3.6.1.4.1.335.1.4.29.2.1.1.5
NAME = ; DESC = The value of this object indicates TCR2, the \ value of Transmit Control Register 2 for a T1/E1 \ CSU line type.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg5 1.3.6.1.4.1.335.1.4.29.2.1.1.6
NAME = ; DESC = The value of this object indicates CCR1, the \ value of Common Control Register 1 for a T1/E1 \ CSU line type.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg6 1.3.6.1.4.1.335.1.4.29.2.1.1.7
NAME = ; DESC = The value of this object indicates CCR2, the \ value of Common Control Register 2 for a T1/E1 \ CSU line type.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg7 1.3.6.1.4.1.335.1.4.29.2.1.1.8
NAME = ; DESC = The value of this object indicates CCR3, the \ value of Common Control Register 3 for a T1/E1 \ CSU line type.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg8 1.3.6.1.4.1.335.1.4.29.2.1.1.9
NAME = ; DESC = The value of this object indicates LICR, the value of \ the Line Interface Control Register for a T1 CSU line type.\ The value of this object indicates CCR4, the value of \ Common Control Register 4 for an E1 line type.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg9 1.3.6.1.4.1.335.1.4.29.2.1.1.10
NAME = ; DESC = The value of this object indicates CCR5, the \ value of Common Control Register 5 for an E1 CSU \ line type. \ Note that for a T1 CSU interface, this object is not used.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1E1CSUStatusCntlReg10 1.3.6.1.4.1.335.1.4.29.2.1.1.11
NAME = ; DESC = The value of this object indicates LICR, the \ value of the Line Interface Control Register for \ an E1 CSU line type. \ Note that for a T1 CSU interface, this object is not used.; HELP = ; CAPABILITIES =;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1CsuGenStatusTable 1.3.6.1.4.1.335.1.4.29.2.2
NAME = ; DESC = The T1 CSU General Status and \ Statistics table.; HELP = ; CAPABILITIES = NET_DISP, VPN_DISP;
OBJECT-TYPE    
  SEQUENCE OF  
    McmT1CsuGenStatusEntry

mcmT1CsuGenStatusEntry 1.3.6.1.4.1.335.1.4.29.2.2.1
NAME = ; DESC = An entry in the T1 CSU General \ Status and Statistics table.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  McmT1CsuGenStatusEntry  

mcmT1CsuGenStatusifIndex 1.3.6.1.4.1.335.1.4.29.2.2.1.1
NAME = ; DESC = The T1 CSU General Status interface \ index value of the specifc entry.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 1..255  

mcmT1CsuGenStatusLineStatus 1.3.6.1.4.1.335.1.4.29.2.2.1.2
NAME = ; DESC = The value of this object indicates the \ T1 CSU line status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER operational(1), alarmMode(2), testMode(3)  

mcmT1CsuGenStatusRedAlarm 1.3.6.1.4.1.335.1.4.29.2.2.1.3
NAME = ; DESC = The value of this object indicates the \ T1 CSU red alarm status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER redAlarm(1), noRedAlarm(2)  

mcmT1CsuGenStatusYellowAlarm 1.3.6.1.4.1.335.1.4.29.2.2.1.4
NAME = ; DESC = The value of this object indicates the \ T1 CSU yellow alarm status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yellowAlarm(1), noYellowAlarm(2)  

mcmT1CsuGenStatusBlueAlarm 1.3.6.1.4.1.335.1.4.29.2.2.1.5
NAME = ; DESC = The value of this object indicates the \ T1 CSU blue alarm status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER blueAlarm(1), noBlueAlarm(2)  

mcmT1CsuGenStatusRxLevel 1.3.6.1.4.1.335.1.4.29.2.2.1.6
NAME = ; DESC = The value of this object indicates the T1 \ CSU line receive level status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER plus2db-to-neg7pt5db(1), neg7pt5db-to-neg15db(2), neg15db-to-neg22pt5db(3), lessThan-neg22pt5db(4)  

mcmT1CsuGenStatusRxElasStrFull 1.3.6.1.4.1.335.1.4.29.2.2.1.7
NAME = ; DESC = The value of this object indicates the T1 \ CSU receive elastic store full status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmT1CsuGenStatusRxElasStrEmpty 1.3.6.1.4.1.335.1.4.29.2.2.1.8
NAME = ; DESC = The value of this object indicates the T1 \ CSU receive elastic store empty status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmT1CsuGenStatusRxPlsDensViolate 1.3.6.1.4.1.335.1.4.29.2.2.1.9
NAME = ; DESC = The value of this object indicates the T1 \ CSU receive pulse density violation status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmT1CsuGenStatusTxPlsDensViolate 1.3.6.1.4.1.335.1.4.29.2.2.1.10
NAME = ; DESC = The value of this object indicates the T1 \ CSU transmit pulse density violation status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmT1CsuGenStatusRxCarrierLoss 1.3.6.1.4.1.335.1.4.29.2.2.1.11
NAME = ; DESC = The value of this object indicates the T1 \ CSU receive carrier loss status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmT1CsuGenStatusRxSyncLoss 1.3.6.1.4.1.335.1.4.29.2.2.1.12
NAME = ; DESC = The value of this object indicates the T1 \ CSU receive loss of sync status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmT1CsuGenStatusLnCdViolations 1.3.6.1.4.1.335.1.4.29.2.2.1.13
NAME = ; DESC = The value of this object indicates the number \ of T1 CSU line code violations. \ Note that this is a 16-bit counter.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 0..65535  

mcmT1CsuGenStatusRxLoopUpCdDetect 1.3.6.1.4.1.335.1.4.29.2.2.1.14
NAME = ; DESC = The value of this object indicates the T1 \ CSU receive loop up code status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmT1CsuGenStatusRxLoopDnCdDetect 1.3.6.1.4.1.335.1.4.29.2.2.1.15
NAME = ; DESC = The value of this object indicates the T1 \ CSU receive loop down code status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmE1CsuGenStatusTable 1.3.6.1.4.1.335.1.4.29.2.3
NAME = ; DESC = The E1 CSU General Status and \ Statistics table.; HELP = ; CAPABILITIES = NET_DISP, VPN_DISP;
OBJECT-TYPE    
  SEQUENCE OF  
    McmE1CsuGenStatusEntry

mcmE1CsuGenStatusEntry 1.3.6.1.4.1.335.1.4.29.2.3.1
NAME = ; DESC = An entry in the E1 CSU General \ Status and Statistics table.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  McmE1CsuGenStatusEntry  

mcmE1CsuGenStatusifIndex 1.3.6.1.4.1.335.1.4.29.2.3.1.1
NAME = ; DESC = The E1 CSU General Status interface \ index value of the specifc entry.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 1..255  

mcmE1CsuGenStatusLineStatus 1.3.6.1.4.1.335.1.4.29.2.3.1.2
NAME = ; DESC = The value of this object indicates the \ E1 CSU line status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER operational(1), alarmMode(2), testMode(3)  

mcmE1CsuGenStatusRedAlarm 1.3.6.1.4.1.335.1.4.29.2.3.1.3
NAME = ; DESC = The value of this object indicates the \ E1 CSU red alarm status. It includes both \ receive carrier loss and receive loss of sync.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER redAlarm(1), noRedAlarm(2)  

mcmE1CsuGenStatusRemoteAlarm 1.3.6.1.4.1.335.1.4.29.2.3.1.4
NAME = ; DESC = The value of this object indicates the \ E1 CSU remote alarm status. It includes both \ receive remote alarm and receive distant MF \ alarm.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER remoteAlarm(1), noRemoteAlarm(2)  

mcmE1CsuGenStatusAISAlarm 1.3.6.1.4.1.335.1.4.29.2.3.1.5
NAME = ; DESC = The value of this object indicates the \ E1 CSU AIS Alarm status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER aisAlarm(1), noAISAlarm(2)  

mcmE1CsuGenStatusRxCarrierLoss 1.3.6.1.4.1.335.1.4.29.2.3.1.6
NAME = ; DESC = The value of this object indicates the \ E1 CSU receive carrier loss status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmE1CsuGenStatusRxSyncLoss 1.3.6.1.4.1.335.1.4.29.2.3.1.7
NAME = ; DESC = The value of this object indicates the E1 \ CSU receive loss of sync status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmE1CsuGenStatusTxElasStrFull 1.3.6.1.4.1.335.1.4.29.2.3.1.8
NAME = ; DESC = The value of this object indicates the E1 \ CSU transmit elastic store full status. This \ indicates that the E1 CSU transmit side \ elastic store buffer fills and a frame is deleted.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmE1CsuGenStatusTxElasStrEmpty 1.3.6.1.4.1.335.1.4.29.2.3.1.9
NAME = ; DESC = The value of this object indicates the E1 \ CSU transmit elastic store empty status. This \ indicates that the E1 CSU transmit side elastic \ store buffer empties and a frame is repeated.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmE1CsuGenStatusRxElasStrFull 1.3.6.1.4.1.335.1.4.29.2.3.1.10
NAME = ; DESC = The value of this object indicates the E1 \ CSU receive elastic store full status. This \ indicates that the E1 CSU receive side elastic \ store buffer fills and a frame is deleted.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmE1CsuGenStatusRxElasStrEmpty 1.3.6.1.4.1.335.1.4.29.2.3.1.11
NAME = ; DESC = The value of this object indicates the E1 \ CSU receive elastic store empty status. This \ indicates that the E1 CSU receive side elastic \ store buffer empties and a frame is repeated.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmE1CsuGenStatusBpvOrLnCdViolations 1.3.6.1.4.1.335.1.4.29.2.3.1.12
NAME = ; DESC = The value of this object indicates the number \ of E1 CSU line code violations. \ Bipolar violation counts if HDB3 disabled, code \ violation counts if HDB3 enabled. \ Note that this is a 16-bit counter.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 0..65535  

mcmE1CsuGenStatusFASErrors 1.3.6.1.4.1.335.1.4.29.2.3.1.13
NAME = ; DESC = The value of this object indicates the number \ of E1 CSU FAS error counts. FAS error counts \ record word errors in the frame alignment \ signal in timeslot 0. \ Note that this is a 12-bit counter.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 0..4095  

mcmE1CsuGenStatusCRC4Errors 1.3.6.1.4.1.335.1.4.29.2.3.1.14
NAME = ; DESC = The value of this object indicates the number \ of E1 CSU CRC4 error counts. This object \ is only applicable when CRC4 is enabled. \ Note that this is a 10-bit counter.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 0..1023  

mcmCsuStatusTable 1.3.6.1.4.1.335.1.4.29.2.4
NAME = ; DESC = The 56K CSU Status and Statistics table.; HELP = ; CAPABILITIES = NET_DISP, VPN_DISP;
OBJECT-TYPE    
  SEQUENCE OF  
    McmCsuStatusEntry

mcmCsuStatusEntry 1.3.6.1.4.1.335.1.4.29.2.4.1
NAME = ; DESC = An entry in the 56K CSU Status \ and Statistics table.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  McmCsuStatusEntry  

mcmCsuStatusifIndex 1.3.6.1.4.1.335.1.4.29.2.4.1.1
NAME = ; DESC = The 56k CSU Status interface index \ value of the specifc entry.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 1..255  

mcmCsuStatusLineStatus 1.3.6.1.4.1.335.1.4.29.2.4.1.2
NAME = ; DESC = The value of this object indicates the 56K \ CSU line status.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER operational(1), linkDown(2), testMode(3)  

mcmCsuStatusRxLossOfSignal 1.3.6.1.4.1.335.1.4.29.2.4.1.3
NAME = ; DESC = The value of this object indicates if the 56K \ CSU receiver has lost signal.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmCsuStatusFAWSync 1.3.6.1.4.1.335.1.4.29.2.4.1.4
NAME = ; DESC = The value of this object indicates the 56K \ CSU DDS FAW Sync in DDS-SC or CC-64K.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmCsuStatusLoopPresent 1.3.6.1.4.1.335.1.4.29.2.4.1.5
NAME = ; DESC = The value of this object indicates if the 56K \ CSU loop is currently present.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mcmCsuStatusInsertLossLineLength 1.3.6.1.4.1.335.1.4.29.2.4.1.6
NAME = ; DESC = The value of this object indicates the 56K \ CSU receiver Insertion loss (iL) in db, and \ Line Length (LL) in kilometers.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER iL50pt5db-LL8pt5km(7), iL44pt4db-LL7pt5km(8), iL38pt4db-LL6pt4km(9), iL32pt3db-LL5pt3km(10), iL26pt0db-LL4pt2km(11), iL19pt7db-LL3pt2km(12), iL13pt6db-LL2pt1km(13), iL7pt3db-LL1pt1km(14), iL0db-LL0km(15)  

mcmCsuStatusRxSignalMag 1.3.6.1.4.1.335.1.4.29.2.4.1.7
NAME = ; DESC = The value of this object indicates the 56K \ CSU receive signal magnitude expressed as \ the 'receiver slicer level'. This value \ is used in conjunction with the db Insertion \ Loss ('iL' from InsertLossLineLength object) \ to compute the signal magnitude as follows: \ Nyquist frequency loop attn (in db) = \ [(iL)**2 + 20log10(51/RxSignalMag)].; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 0..255  

mcmCsuStatusInvalidBPVcounts 1.3.6.1.4.1.335.1.4.29.2.4.1.8
NAME = ; DESC = The value of this object indicates the 56K \ CSU invalid BPV (Bipolar Violation) count. \ Note that this is an 8-bit counter.; HELP = ; CAPABILITIES = ;
OBJECT-TYPE    
  INTEGER 0..255  

mcmT1CsuYellowAlarmSet 1.3.6.1.4.1.335.1.4.29.3
NAME = ; DESC = When a downstream node detects a loss of \ synchronization in its receive pair of a \ T1 line, it is in red alarm condition. \ In turn, it transmits a yellow alarm \ signal upstream to the previous node. \ Severity Level: MAJOR.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmT1CsuYellowAlarmClear 1.3.6.1.4.1.335.1.4.29.4
NAME = ; DESC = When a downstream node detects a loss of \ synchronization in its receive pair of a \ T1 line, it is in red alarm condition. \ In turn, it transmits a yellow alarm \ signal upstream to the previous node. \ This trap clears the node that has the \ Yellow Alarm condition.; Severity Level: INFORMATIVE.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmT1CsuBlueAlarmSet 1.3.6.1.4.1.335.1.4.29.5
NAME = ; DESC = When a downstream node detects a loss of \ synchronization in its receive pair of a \ T1 line, it is in red alarm condition. \ In turn, it transmits a yellow alarm \ signal upstream to the previous node \ and a blue alarm signal downstream to \ the next node.\ Severity Level: MINOR.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmT1CsuBlueAlarmClear 1.3.6.1.4.1.335.1.4.29.6
NAME = ; DESC = When a downstream node detects a loss of \ synchronization in its receive pair of a \ T1 line, it is in red alarm condition. \ In turn, it transmits a yellow alarm \ signal upstream to the previous node \ and a blue alarm signal downstream to \ the next node. This trap clears the \ node that has the Blue Alarm condition. \ Severity Level: INFORMATIVE.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmE1CsuRedAlarmSet 1.3.6.1.4.1.335.1.4.29.7
NAME = ; DESC = This trap is generated upon the occurrence \ of an E1 CSU Red Alarm. A red alarm indicates that \ an out-of-frame condition existed for the last 100 \ milliseconds or longer. \ Severity Level: CRITICAL.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmE1CsuRedAlarmClear 1.3.6.1.4.1.335.1.4.29.8
NAME = ; DESC = This trap is generated upon the clearance \ of an E1 CSU Red Alarm. A red alarm is cleared \ when the out-of-frame condition has been absent \ for 100 milliseconds. \ Severity Level : INFORMATIVE.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmE1CsuRemoteAlarmSet 1.3.6.1.4.1.335.1.4.29.9
NAME = ; DESC = This trap is generated upon the occurrence \ of an E1 CSU Remote Alarm. \ Severity Level: MAJOR.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmE1CsuRemoteAlarmClear 1.3.6.1.4.1.335.1.4.29.10
NAME = ; DESC = This trap is generated upon the clearance \ of an E1 CSU Remote Alarm. \ Severity Level: INFORMATIVE.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmE1CsuAISAlarmSet 1.3.6.1.4.1.335.1.4.29.11
NAME = ; DESC = This trap is generated upon the occurrence \ of an E1 CSU AIS Alarm. The AIS (alarm indication \ signal) alarm is detected as an all ones condition \ on the E1 line persisting for 100ms or longer. \ This indicates the E1 line is unavailable. \ Severity Level: MINOR.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

mcmE1CsuAISAlarmClear 1.3.6.1.4.1.335.1.4.29.12
NAME = ; DESC = This trap is generated upon the clearance \ of an E1 CSU AIS Alarm. \ Severity Level: INFORMATIVE.; HELP = ;
TRAP-TYPE    
  mcmSysAsciiTimeOfDay  
  mcmT1E1CsuCfgifIndex  

Defined Objects

McmT1E1CsuCfgEntry  
SEQUENCE    
  INTEGER as mcmT1E1CsuCfgifIndex  
  INTEGER as mcmT1E1CsuCfgLineType  
  INTEGER as mcmT1E1CsuCfgLineSpeed  
  INTEGER as mcmT1E1CsuCfgLineBuildOut  
  INTEGER as mcmT1E1CsuCfgTxIdleCode  
  INTEGER as mcmT1E1CsuCfgTxRxClkSource  
  INTEGER as mcmT1E1CsuCfgDS0BasicRate  
  INTEGER as mcmT1E1CsuCfgLocalLoopback  
  INTEGER as mcmT1E1CsuCfgRemoteLoopback  
  INTEGER as mcmT1E1CsuCfgFramerLoopback  
  INTEGER as mcmT1E1CsuCfgTrapEnable  
  INTEGER as mcmT1E1CsuCfgFrameFmt  
  INTEGER as mcmT1E1CsuCfgTxRx0CodeSuppress  
  INTEGER as mcmT1E1CsuCfgTxB7ZeroSuppress  
  INTEGER as mcmT1E1CsuCfgPayloadLoopback  
  INTEGER as mcmT1E1CsuCfgTransmitLoopUp  
  INTEGER as mcmT1E1CsuCfgTransmitLoopDown  
  INTEGER as mcmT1E1CsuCfgTxRxHDB3  
  INTEGER as mcmT1E1CsuCfgTxRxCRC4  
  DisplayString as mcmT1E1CsuCfgDS0Connection  

McmCsuCfgEntry  
SEQUENCE    
  INTEGER as mcmCsuCfgifIndex  
  INTEGER as mcmCsuCfgOperatingMode  
  INTEGER as mcmCsuCfgClockingSource  
  INTEGER as mcmCsuCfgTxOutOfFrame  
  INTEGER as mcmCsuCfgTxOutOfService  
  INTEGER as mcmCsuCfgTxControlModeIdle  
  INTEGER as mcmCsuCfgZeroSuppressDisable  
  INTEGER as mcmCsuCfgTxIdle  
  INTEGER as mcmCsuCfgCSULoopback  
  INTEGER as mcmCsuCfgFilterForceEnable  
  INTEGER as mcmCsuCfgFilterForcingCntl  

McmT1E1CsuCntlRegStatusEntry  
SEQUENCE    
  INTEGER as mcmT1E1CSUStatusifIndex  
  INTEGER as mcmT1E1CSUStatusCntlReg1  
  INTEGER as mcmT1E1CSUStatusCntlReg2  
  INTEGER as mcmT1E1CSUStatusCntlReg3  
  INTEGER as mcmT1E1CSUStatusCntlReg4  
  INTEGER as mcmT1E1CSUStatusCntlReg5  
  INTEGER as mcmT1E1CSUStatusCntlReg6  
  INTEGER as mcmT1E1CSUStatusCntlReg7  
  INTEGER as mcmT1E1CSUStatusCntlReg8  
  INTEGER as mcmT1E1CSUStatusCntlReg9  
  INTEGER as mcmT1E1CSUStatusCntlReg10  

McmT1CsuGenStatusEntry  
SEQUENCE    
  INTEGER as mcmT1CsuGenStatusifIndex  
  INTEGER as mcmT1CsuGenStatusLineStatus  
  INTEGER as mcmT1CsuGenStatusRedAlarm  
  INTEGER as mcmT1CsuGenStatusYellowAlarm  
  INTEGER as mcmT1CsuGenStatusBlueAlarm  
  INTEGER as mcmT1CsuGenStatusRxLevel  
  INTEGER as mcmT1CsuGenStatusRxElasStrFull  
  INTEGER as mcmT1CsuGenStatusRxElasStrEmpty  
  INTEGER as mcmT1CsuGenStatusRxPlsDensViolate  
  INTEGER as mcmT1CsuGenStatusTxPlsDensViolate  
  INTEGER as mcmT1CsuGenStatusRxCarrierLoss  
  INTEGER as mcmT1CsuGenStatusRxSyncLoss  
  INTEGER as mcmT1CsuGenStatusLnCdViolations  
  INTEGER as mcmT1CsuGenStatusRxLoopUpCdDetect  
  INTEGER as mcmT1CsuGenStatusRxLoopDnCdDetect  

McmE1CsuGenStatusEntry  
SEQUENCE    
  INTEGER as mcmE1CsuGenStatusifIndex  
  INTEGER as mcmE1CsuGenStatusLineStatus  
  INTEGER as mcmE1CsuGenStatusRedAlarm  
  INTEGER as mcmE1CsuGenStatusRemoteAlarm  
  INTEGER as mcmE1CsuGenStatusAISAlarm  
  INTEGER as mcmE1CsuGenStatusRxCarrierLoss  
  INTEGER as mcmE1CsuGenStatusRxSyncLoss  
  INTEGER as mcmE1CsuGenStatusTxElasStrFull  
  INTEGER as mcmE1CsuGenStatusTxElasStrEmpty  
  INTEGER as mcmE1CsuGenStatusRxElasStrFull  
  INTEGER as mcmE1CsuGenStatusRxElasStrEmpty  
  INTEGER as mcmE1CsuGenStatusBpvOrLnCdViolations  
  INTEGER as mcmE1CsuGenStatusFASErrors  
  INTEGER as mcmE1CsuGenStatusCRC4Errors  

McmCsuStatusEntry  
SEQUENCE    
  INTEGER as mcmCsuStatusifIndex  
  INTEGER as mcmCsuStatusLineStatus  
  INTEGER as mcmCsuStatusRxLossOfSignal  
  INTEGER as mcmCsuStatusFAWSync  
  INTEGER as mcmCsuStatusLoopPresent  
  INTEGER as mcmCsuStatusInsertLossLineLength  
  INTEGER as mcmCsuStatusRxSignalMag  
  INTEGER as mcmCsuStatusInvalidBPVcounts