
| RFC-1215 | RFC1155-SMI | RFC-1212 |
| MICOM-OSCAR-MIB | MICOM-SYS-MIB | SNMPv2-TC |
| TRAP-TYPE | Counter | OBJECT-TYPE |
| TimeTicks | micom-oscar | mcmSysAsciiTimeOfDay |
| mcmSysIfExtModule | mcmSysIfExtPPA | DisplayString |
| micom-frame-relay | 1.3.6.1.4.1.335.1.4.7 | ||
| OBJECT IDENTIFIER | |||
| fr-configuration | 1.3.6.1.4.1.335.1.4.7.1 | ||
| OBJECT IDENTIFIER | |||
| mcmFrWanLinkUp | 1.3.6.1.4.1.335.1.4.7.1 | ||
| NAME = ; DESC = FR TRAP message: indication of WAN link \ up.\ Severity Level: INFORMATIVE.; HELP = The Frame Relay WAN LINK is up. \ Normal status Indicator.; | |||
| TRAP-TYPE | |||
| mcmSysAsciiTimeOfDay | |||
| mcmSysIfExtModule | |||
| mcmSysIfExtPPA | |||
| mcmFrGlobalGroup | 1.3.6.1.4.1.335.1.4.7.1.1 | ||
| OBJECT IDENTIFIER | |||
| mcmFrMaxDLCI | 1.3.6.1.4.1.335.1.4.7.1.1.1 | ||
| NAME = ; DESC = The maximum number of DLCIs that \ may be configured for the entire \ box; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrMaxVirtualPorts | 1.3.6.1.4.1.335.1.4.7.1.1.2 | ||
| NAME = ; DESC = The maximum number of Virtual Ports that \ may be configured for the entire \ box; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32 | ||
| mcmFrMaxDlciPerLine | 1.3.6.1.4.1.335.1.4.7.1.1.3 | ||
| NAME = ; DESC = The maximum number of DLCIs that may \ be configured for a Frame Relay line; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrConnectTime | 1.3.6.1.4.1.335.1.4.7.1.1.4 | ||
| NAME = ; DESC = The sysUpTime when the FR Driver was \ initialized; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mcmFrOctetsSent | 1.3.6.1.4.1.335.1.4.7.1.1.5 | ||
| NAME = ; DESC = Total number of Frame Relay Information \ field octets that were sent out all FR \ ports; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrOctetsReceived | 1.3.6.1.4.1.335.1.4.7.1.1.6 | ||
| NAME = ; DESC = Total number of Frame Relay Information \ Field octets that were received across all \ FR ports; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrFramesSent | 1.3.6.1.4.1.335.1.4.7.1.1.7 | ||
| NAME = ; DESC = Total number of Frame Relay Frames \ sent out all FR ports; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrFramesReceived | 1.3.6.1.4.1.335.1.4.7.1.1.8 | ||
| NAME = ; DESC = Total number of Frame Relay Frames \ received in on all FR ports; HELP = CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrGlobalGroupCntrAction | 1.3.6.1.4.1.335.1.4.7.1.1.9 | ||
| NAME = ; DESC = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ Setting this object to reset will reset \ counters in this group; HELP = All objects will be reset in this group \ except mcmFrMaxDLCI, mcmFrMaxVirtualPorts, \ mcmFrMaxDlciPerLine and mcmFrConnectTime \ which are not counters; CAPABILITIES = NET_CFG, VPN_CFG; | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1), other(2) | ||
| mcmFrDNANumberingPlan | 1.3.6.1.4.1.335.1.4.7.1.1.10 | ||
| NAME = ; DESC = The value of this object designates the \ numbering plan of the DNA; HELP = The number plan is used in conjunction \ with a DNA. This object identifies the \ type of call as E.164 or X.121 ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | e164(1), x121(3) | ||
| mcmFrActivePanlDlciSVCs | 1.3.6.1.4.1.335.1.4.7.1.1.11 | ||
| NAME = ; DESC = The number of active PANL DLCI SVCs \ for all FR ports.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTotalTunnelingPVCs | 1.3.6.1.4.1.335.1.4.7.1.1.12 | ||
| NAME = ; DESC = The total number of tunneling PVCs configured.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrActiveTunnelingPVCs | 1.3.6.1.4.1.335.1.4.7.1.1.13 | ||
| NAME = ; DESC = The number of active tunneling PVCs configured.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPanlLmiTrapEnable | 1.3.6.1.4.1.335.1.4.7.1.1.14 | ||
| NAME = ; DESC = This object indicates whether the generation of \ Trap messages are enabled/disabled for the FR \ PANL LMI module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| mcmFrMsmTrapEnable | 1.3.6.1.4.1.335.1.4.7.1.1.15 | ||
| NAME = ; DESC = This object indicates whether the generation of \ Trap messages are enabled/disabled for the FR \ MSM module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| mcmFrCoreTrapEnable | 1.3.6.1.4.1.335.1.4.7.1.1.16 | ||
| NAME = ; DESC = This object indicates whether the generation of \ Trap messages are enabled/disabled for the FR \ Core module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| mcmFrPlmTrapEnable | 1.3.6.1.4.1.335.1.4.7.1.1.17 | ||
| NAME = ; DESC = This object indicates whether the generation of \ Trap messages are enabled/disabled for the FR \ Plm module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| mcmFrPhyPortTable | 1.3.6.1.4.1.335.1.4.7.1.2 | ||
| NAME = ; DESC = Table of physical port entries \ containing flow control info \ and statistics; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrPhyPortEntry | |||
| mcmFrPhyPortEntry | 1.3.6.1.4.1.335.1.4.7.1.2.1 | ||
| NAME = ; DESC = Entry for a Frame Relay physical \ port; HELP = Entry for a Frame Relay physical \ port, containing flow control \ information and statistics NOT \ included in the RFC 1315 mib; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrPhyPortEntry | |||
| mcmFrPhyPortExtIfIndex | 1.3.6.1.4.1.335.1.4.7.1.2.1.1 | ||
| NAME = ; DESC = The ifIndex of the physical port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortFlowControl | 1.3.6.1.4.1.335.1.4.7.1.2.1.2 | ||
| NAME = ; DESC = Determines whether or not rate enforcement \ based on congestion should be enforced; HELP = Enabling this feature will allow packets \ exceeding the current allowable rate \ to be dropped if congestion has been \ detected on the network.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| mcmFrPhyPortThroughput | 1.3.6.1.4.1.335.1.4.7.1.2.1.3 | ||
| NAME = Frame Relay DLCI Throughput; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced with \ new objects TxThroughput, RxThroughput. \ Default throughput for a PVC; HELP = Defalut throughput used for all \ PVCs on the same frame relay \ physical interface. Will be \ assigned to a PVC when the PVC \ is created. valid if flow cntl \ is enabled. ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortDelta | 1.3.6.1.4.1.335.1.4.7.1.2.1.4 | ||
| NAME = Frame Relay Delta; DESC = Delta time interval to increase or \ decrease the transmit rate by monitoring \ the number of frames rcvd or txd with the \ FECN bit cleared or set; HELP = Default used for adding PVCs. The \ delta time interval to increase or \ decrease the current transmit rate \ based on then number of frames \ received with the FECN bit cleared \ or set. Typically 4 types end-to-end \ transit delay. Used only if flow \ control is enabled. (In 1 second \ units.). Valid if flow cntl is enabled; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortConsectiveFrames | 1.3.6.1.4.1.335.1.4.7.1.2.1.5 | ||
| NAME = ; DESC = Number of consecutive frames received \ with the BECN bit set before reducing \ the transmit rate; HELP = Number of consecutive frames that must \ have BECN bit set before reducing \ transmit rate. Transmit rate is \ increased when S/2 consecutive frames \ are received with teh BECN bit cleared. \ Valid only when flow control is enabled.\ See CCITT Q.922 Appendix I, for the \ method to compute parameter S.\ Valid if flow cntl is enabled; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortMtuSize | 1.3.6.1.4.1.335.1.4.7.1.2.1.6 | ||
| NAME = ; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced with \ new objects TxMaxFrameSize, RxMaxFrameSize. \ Maximum Transmission Unit Size; HELP = Maximum Packet size that can be \ passed to Frame Relay and will \ be sent across the Frame Relay \ network.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortConnectTime | 1.3.6.1.4.1.335.1.4.7.1.2.1.7 | ||
| NAME = ; DESC = sysUpTime when the port was created; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mcmFrPhyPortLMISent | 1.3.6.1.4.1.335.1.4.7.1.2.1.8 | ||
| NAME = ; DESC = Number of PVC LMI frames sent on \ physical port (DLCI 0); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortLMIReceived | 1.3.6.1.4.1.335.1.4.7.1.2.1.9 | ||
| NAME = ; DESC = Number of PVC LMI frames received \ on this port (DLCI 0); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortXIDSent | 1.3.6.1.4.1.335.1.4.7.1.2.1.10 | ||
| NAME = ; DESC = Number of XID frames sent on \ this interface; HELP = Valid only if packet negotiation is enabled. \ Network must support XID frames; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortXIDReceived | 1.3.6.1.4.1.335.1.4.7.1.2.1.11 | ||
| NAME = ; DESC = Number of XID frames received on \ this interface; HELP = Valid only if packet negotiation is enabled. \ Network must support XID frames; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortCLLMSent | 1.3.6.1.4.1.335.1.4.7.1.2.1.12 | ||
| NAME = ; DESC = Number of CLLM frames sent on \ this interface; HELP = Network must support CLLM before \ this feature is enabled; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortCLLMReceived | 1.3.6.1.4.1.335.1.4.7.1.2.1.13 | ||
| NAME = ; DESC = Number of CLLM frames received on \ this interface; HELP = Network must support CLLM before \ this feature is enabled; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortHeaderErrors | 1.3.6.1.4.1.335.1.4.7.1.2.1.14 | ||
| NAME = ; DESC = Number of frames received with \ incomplete or missing address \ field; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortInvalidDLCI | 1.3.6.1.4.1.335.1.4.7.1.2.1.15 | ||
| NAME = ; DESC = Number of frames on an unassigned \ or invalid number; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortShortFrames | 1.3.6.1.4.1.335.1.4.7.1.2.1.16 | ||
| NAME = ; DESC = Number of short frames received; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortLongFrames | 1.3.6.1.4.1.335.1.4.7.1.2.1.17 | ||
| NAME = ; DESC = Number of long frames received that \ were too long (larger than MTU); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortIgnoredFrames | 1.3.6.1.4.1.335.1.4.7.1.2.1.18 | ||
| NAME = ; DESC = Number of frames received that were \ ignored (no errors); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortXIDExpirations | 1.3.6.1.4.1.335.1.4.7.1.2.1.19 | ||
| NAME = ; DESC = Number of XID TM21 timer expirations; HELP = Valid only if MTU negotiation is \ enabled; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortTxExpirations | 1.3.6.1.4.1.335.1.4.7.1.2.1.20 | ||
| NAME = ; DESC = Number of flow control (CLLM) timer \ expirations; HELP = Valid only if flow control negotiation is configured; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortPVCLMIStatus | 1.3.6.1.4.1.335.1.4.7.1.2.1.21 | ||
| NAME = ; DESC = The status of the PVC LMI (up or down). ; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2) | ||
| mcmFrPhyPortSVCLMIStatus | 1.3.6.1.4.1.335.1.4.7.1.2.1.22 | ||
| NAME = ; DESC = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ The status of the SVC LMI (up or down). ; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2) | ||
| mcmFrPhyPortActivePanlDlciSVCs | 1.3.6.1.4.1.335.1.4.7.1.2.1.23 | ||
| NAME = ; DESC = Number of active PANL DLCI SVCs on \ this interface.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortRxDataFrames | 1.3.6.1.4.1.335.1.4.7.1.2.1.24 | ||
| NAME = ; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced \ with the new object mcmFrPhyPortDataFrames. \ Number of data frames received on all assigned \ DLCIs.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortTxDataFrames | 1.3.6.1.4.1.335.1.4.7.1.2.1.25 | ||
| NAME = ; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced \ with the new object mcmFrPhyPortDataFrames. \ Number of data frames sent on all assigned \ DLCIs.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortRxActivations | 1.3.6.1.4.1.335.1.4.7.1.2.1.26 | ||
| NAME = ; DESC = Number of activations received on this interface.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortRxDeactivations | 1.3.6.1.4.1.335.1.4.7.1.2.1.27 | ||
| NAME = ; DESC = Number of deactivations received on this interface.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortRxOkAcks | 1.3.6.1.4.1.335.1.4.7.1.2.1.28 | ||
| NAME = ; DESC = Number of OK ACK messages received on this \ interface.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortRxErrAcks | 1.3.6.1.4.1.335.1.4.7.1.2.1.29 | ||
| NAME = ; DESC = Number of Error ACK messages received on this \ interface.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortRxUnknowns | 1.3.6.1.4.1.335.1.4.7.1.2.1.30 | ||
| NAME = ; DESC = Number of Unknown messages received on this \ interface.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortRxErrors | 1.3.6.1.4.1.335.1.4.7.1.2.1.31 | ||
| NAME = ; DESC = Number of Error messages received on this \ interface.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortRxOctets | 1.3.6.1.4.1.335.1.4.7.1.2.1.32 | ||
| NAME = ; DESC = Number of data bytes received.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortTxOctets | 1.3.6.1.4.1.335.1.4.7.1.2.1.33 | ||
| NAME = ; DESC = Number of data bytes sent.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPhyPortTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.2.1.34 | ||
| NAME = Frame Relay DLCI Tx Throughput; DESC = The transmission CIR expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.2.1.35 | ||
| NAME = Frame Relay DLCI Rx Throughput; DESC = The receive CIR expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortTxMaxFrameSize | 1.3.6.1.4.1.335.1.4.7.1.2.1.36 | ||
| NAME = ; DESC = The maximum transmission FR packet size \ expressed in bytes.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortRxMaxFrameSize | 1.3.6.1.4.1.335.1.4.7.1.2.1.37 | ||
| NAME = ; DESC = The maximum receive FR packet size \ expressed in bytes.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortRateEnf | 1.3.6.1.4.1.335.1.4.7.1.2.1.38 | ||
| NAME = ; DESC = The rate enforcement enabled or disabled \ parameter for FR congestion management \ processing.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| mcmFrPhyPortTxBc | 1.3.6.1.4.1.335.1.4.7.1.2.1.39 | ||
| NAME = ; DESC = The transmission committed burst size \ expressed in bits.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortRxBc | 1.3.6.1.4.1.335.1.4.7.1.2.1.40 | ||
| NAME = ; DESC = The receive committed burst size \ expressed in bits.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortTxBe | 1.3.6.1.4.1.335.1.4.7.1.2.1.41 | ||
| NAME = ; DESC = The transmission excess burst size \ expressed in bits.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortRxBe | 1.3.6.1.4.1.335.1.4.7.1.2.1.42 | ||
| NAME = ; DESC = The receive excess burst size \ expressed in bits.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortDataFrames | 1.3.6.1.4.1.335.1.4.7.1.2.1.43 | ||
| NAME = ; DESC = Total number of data frames on all assigned \ DLCIs.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrPVCPhyTable | 1.3.6.1.4.1.335.1.4.7.1.3 | ||
| NAME = ; DESC = Table that extends the RFC 1315 \ DLCMI table contianing info \ about the PVC LMI; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrPVCPhyEntry | |||
| mcmFrPVCPhyEntry | 1.3.6.1.4.1.335.1.4.7.1.3.1 | ||
| NAME = ; DESC = Entry into the micom PVC LMI \ configuration extensions; HELP = Entry in the PVC Phys Table. \ Additional information required \ (not in RFC 1315 DLCI table); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrPVCPhyEntry | |||
| mcmFrPVCPhyIfIndex | 1.3.6.1.4.1.335.1.4.7.1.3.1.1 | ||
| NAME = ; DESC = IfIndex of the physical port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPVCLMIMode | 1.3.6.1.4.1.335.1.4.7.1.3.1.2 | ||
| NAME = ; DESC = Indicates whether the local PVC \ LMI is operating in the DTE or \ DCE mode; HELP = In DTE mode the Status Enquiry messages \ will be sent. In DCE mode, Status \ Reports will be sent in response \ to Status Enquiry mesages.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | dte(1), dce(2) | ||
| mcmFrPVCBiDir | 1.3.6.1.4.1.335.1.4.7.1.3.1.3 | ||
| NAME = ; DESC = Indicates whether the PVC LMI \ should perform both the sending \ of status enquiries and sending \ of status reports; HELP = Must be with bilateral agreement \ with the switch enabled. Switch \ may send status enquiry messages \ as defined for the DTEs and allows\ the DTE to respond with a status \ messages in the same way as switch \ does (in this mode Status Enquiries \ will still be transmitted normally; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | true(1), false(2) | ||
| mcmFrSVCPhyTable | 1.3.6.1.4.1.335.1.4.7.1.4 | ||
| NAME = ; DESC = Table containing the SVC default \ parameters ; HELP = Table containing default SVC \ parameters to be used if none \ are specified when configuring \ an SVC; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrSVCPhyEntry | |||
| mcmFrSVCPhyEntry | 1.3.6.1.4.1.335.1.4.7.1.4.1 | ||
| NAME = ; DESC = Entry into the SVC Default\ parameter table; HELP = Each entry contains the default \ SVC parameters for the specified \ interface; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrSVCPhyEntry | |||
| mcmFrSVCPhyIfIndex | 1.3.6.1.4.1.335.1.4.7.1.4.1.1 | ||
| NAME = ; DESC = IfIndex of the physical port \ the SVC information is \ associated with; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCState | 1.3.6.1.4.1.335.1.4.7.1.4.1.2 | ||
| NAME = ; DESC = SVC LMI Protocol to be used; HELP = All SVC connection setup must \ use the same LMI protocol; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | q933svc(1) | ||
| mcmFrSVCT303 | 1.3.6.1.4.1.335.1.4.7.1.4.1.3 | ||
| NAME = ; DESC = The duration, in seconds, \ of the setup timer for SVCs.; HELP = Causes at most one Setup retransmission.\ How long the SVC LMI will wait \ for a response from the network \ (e.g. call proceeding, connect) \ before the setup message will be \ retransmitted. In 1 second unit. \ Q.931 recommends 4 seconds; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCT305 | 1.3.6.1.4.1.335.1.4.7.1.4.1.4 | ||
| NAME = ; DESC = The duration of the Disconnect \ timer (in seconds) for SVCs.; HELP = Causes at most one release \ transmission. How long the SVC LMI will wait \ for a release message from the \ network before it will transmit \ a release message. (The SVC LMI \ will then wait for a release \ message from the network.) In 1 second \ unit. Q.931 recommends 30 seconds; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCT308 | 1.3.6.1.4.1.335.1.4.7.1.4.1.5 | ||
| NAME = ; DESC = The duration of Release timer (in \ seconds) for SVCs.; HELP = Causes at most one release transmission. \ How long the SVC LMI will wait \ for a response from the network \ before the release message will \ be retransmitted. (When the \ second release is transmitted, \ the local SVC LMI considers \ the corresponding SVC to have \ been released by the network \ as well - even if no response \ is received.) In 1 second units. \ Q.931 recommends 4 seconds; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCT310 | 1.3.6.1.4.1.335.1.4.7.1.4.1.6 | ||
| NAME = ; DESC = The duration of Connect Timer (in seconds) \ for SVCs.; HELP = Causes connection disconnection. \ How long the SVC LMI will wait \ (in seconds) for a Connect message \ (after receiving the Call Proceeding \ message) before sending a Release \ message. In 1 second units. Q.931 \ recommends a duration between 30\ to 120 seconds on the DTE side and \ 10 seconds on the DC#E side; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMaxCalls | 1.3.6.1.4.1.335.1.4.7.1.4.1.7 | ||
| NAME = ; DESC = Maximum number of SVC Connections; HELP = The sum of both the incoming and outgoing SVCs; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrSVCMaxTxSize | 1.3.6.1.4.1.335.1.4.7.1.4.1.8 | ||
| NAME = ; DESC = Default Maximum transmit frame size, \ in bytes, to negotiate with the remote; HELP = This value will be used only if a \ specific value is not included in the \ Connect Request primitive. A value of \ 0 indicates the network default values \ are to be used (unless it is passed down \ at connect time). Expressed in bytes. CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMaxRxSize | 1.3.6.1.4.1.335.1.4.7.1.4.1.9 | ||
| NAME = ; DESC = Maximum receive frame size in bytes; HELP = Default value for the maximum receive \ frame size to negotiate with the remote. \ This value will be used only if a \ specific value is not included in the \ Connect Request primitive. A value of \ 0 indicates the network default values \ are to be used (unless it is passed down \ at connect time). Expressed in bytes. CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMinDLCI | 1.3.6.1.4.1.335.1.4.7.1.4.1.10 | ||
| NAME = ; DESC = Lowest DLCI value for SVCs on \ this network link; HELP = This value applies only to SVC connections. \ PVC DLCI connections may be established \ above or below this value.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMaxDLCI | 1.3.6.1.4.1.335.1.4.7.1.4.1.11 | ||
| NAME = ; DESC = Highest DLCI value for SVCs on \ the this network; HELP = This value applies only to SVC connections. \ PVC DLCI connections may be established \ above or below this value.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMinTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.4.1.12 | ||
| NAME = ; DESC = Minimum transmit throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ maximum transmit throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMinRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.4.1.13 | ||
| NAME = ; DESC = Minimum receive throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ maximum receive throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMaxTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.4.1.14 | ||
| NAME = ; DESC = Maximum transmit throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ minimum transmit throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMaxRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.4.1.15 | ||
| NAME = ; DESC = Maximum receive throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ minimum receive throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.4.1.16 | ||
| NAME = ; DESC = Transmit burst size in bytes; HELP = Default Committed Transmit burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.4.1.17 | ||
| NAME = ; DESC = Receive burst size in bytes; HELP = Default Committed Receive burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.4.1.18 | ||
| NAME = ; DESC = Excess transmit burst size in bytes; HELP = Default Uncommitted Transmit burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.4.1.19 | ||
| NAME = ; DESC = Excess receive burst size in bytes; HELP = Default Uncommitted Receive burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrVirtualPortTable | 1.3.6.1.4.1.335.1.4.7.1.5 | ||
| NAME = ; DESC = Table to define the virtual port; HELP = Table to provide the mapping between \ virtual ports and physical ports \ and to define the virtual port \ parameters; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrVirtualPortEntry | |||
| mcmFrVirtualPortEntry | 1.3.6.1.4.1.335.1.4.7.1.5.1 | ||
| NAME = ; DESC = Entry into the Virtual port table; HELP = Each entry in this table contains \ information to define a virtual \ port; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrVirtualPortEntry | |||
| mcmFrVirtualPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.5.1.1 | ||
| NAME = Virtual Port Interface Number; DESC = IfIndex associated with this Virtual Port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrVirtualPortPhyPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.5.1.2 | ||
| NAME = ; DESC = *******NOTE: THIS OBJECT IS OBSOLETE******* This information is no longer useful for \ virtual ports. The virtual ports no longer \ have an underlying network. Only SVC DNAs \ and PVC DLCIs are associated with VPs now. \ The underlying MPANL will take care of which \ link the SVC is to be made on and a Physical \ Line IfIndex has been added to the PVCs. VP \ are no longer required to provide the backup \ link support (MPANL now does that).\ IfIndex of the Frame Relay physical \ port for which the virtual port is \ (or will be) linked to; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrVirtualPortPPA | 1.3.6.1.4.1.335.1.4.7.1.5.1.3 | ||
| NAME = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ Virtual Port PPA Number ; DESC = Point of Physical attachment for \ this Virtual Port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..254 | ||
| mcmFrVirtualPortMode | 1.3.6.1.4.1.335.1.4.7.1.5.1.4 | ||
| NAME = Virtual Port Mode; HELP = Mode of the virtual port; DESC = Easy Routing requires that data \ will be switched between the \ Virtual Circuits on the this \ virutal port. Basic mode turns \ off the switching mode; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | basic(1), easyRouting(2) | ||
| mcmFrVirtualPortState | 1.3.6.1.4.1.335.1.4.7.1.5.1.5 | ||
| NAME = Virtual Port State; DESC = State of the virtual port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2), uninitialized(3) | ||
| mcmFrVirtualPortEntryStatus | 1.3.6.1.4.1.335.1.4.7.1.5.1.6 | ||
| NAME = ; DESC = Virtual port row status; HELP = Indicates whether or not this \ entry is valid; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| mcmFrVirtualPortProtocolBinding | 1.3.6.1.4.1.335.1.4.7.1.5.1.7 | ||
| NAME = ; DESC = Bitmap that contains the protocols bound \ to this Virtual Port.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | ip-configured(1), ipx-configured(2), ip-and-ipx-configured(3), bridge-configured(4), ip-and-bridge-configured(5), ipx-and-bridge-configured(6), ip-and-ipx-and-bridge-configured(7), sNA-configured(8), x25-configured(9) | ||
| mcmFrVirtualPortNumber | 1.3.6.1.4.1.335.1.4.7.1.5.1.8 | ||
| NAME = ; DESC = This object indicates the Virtual \ Port Number used as an identifier \ for a Virtual Port. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapTable | 1.3.6.1.4.1.335.1.4.7.1.6 | ||
| NAME = ; DESC = Table for SVC to VP bindings; HELP = This table will give the SVC \ DNA address to be bound to the \ specified Virtual Port; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrSVCMapEntry | |||
| mcmFrSVCMapEntry | 1.3.6.1.4.1.335.1.4.7.1.6.1 | ||
| NAME = ; DESC = Entry in the SVC to VP binding \ table; HELP = SVC/VP binding entry in the SVC \ binding table. Multiple SVCS \ (DNAs) may be bound to a single \ VP (ifindex); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrSVCMapEntry | |||
| mcmFrSVCMapVirtualPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.6.1.1 | ||
| NAME = ; DESC = Virtual Port ifIndex associated \ with this DNA; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapDNA | 1.3.6.1.4.1.335.1.4.7.1.6.1.2 | ||
| NAME = ; DESC = Remote DNA to associate SVC with \ the corresponding virtual port; HELP = DNA to be mapped to the \ corresponding virtual port. \ This will be used to create \ an SVC to the corresponding \ remote DNA; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| OCTET STRING | |||
| mcmFrSVCMapDLCI | 1.3.6.1.4.1.335.1.4.7.1.6.1.3 | ||
| NAME = ; DESC = DLCI for the connected SVC; HELP = Valid only when the SVC is up; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapMaxTxSize | 1.3.6.1.4.1.335.1.4.7.1.6.1.4 | ||
| NAME = ; DESC = Maximum transmit frame size to \ negotiate with the remote (in \ bytes); HELP = This value will override the default values for \ the physical interface. A value \ of 0 indicates the networks default \ values are to be used. Experessed in \ bytes; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapMaxRxSize | 1.3.6.1.4.1.335.1.4.7.1.6.1.5 | ||
| NAME = ; DESC = Maximum receive frame size to \ negotiate with the remote (in \ bytes); HELP = This value will override the default values for \ the physical interface. A value \ of 0 indicates the networks default \ values are to be used. Experessed in \ bytes; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapMinTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.6.1.6 | ||
| NAME = ; DESC = Minimum transmit throughput in \ bits per second to negotiate with \ the remote; HELP = Used with the maximum transmit throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapMinRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.6.1.7 | ||
| NAME = ; DESC = Minimum receive throughput in \ bits per second to negotiate with \ the remote; HELP = Used with the maximum receive throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapMaxTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.6.1.8 | ||
| NAME = ; DESC = Maximum transmit throughput in \ bits per second to negotiate with \ the remote; HELP = Used with the minimum transmit throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapMaxRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.6.1.9 | ||
| NAME = ; DESC = Maximum receive throughput in \ bits per second to negotiate with \ the remote; HELP = Used with the minimum receive throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.6.1.10 | ||
| NAME = ; DESC = Transmit burst size in bytes; HELP = Committed transmit burst size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.6.1.11 | ||
| NAME = ; DESC = Receive burst size in bytes; HELP = Committed receive burst size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.6.1.12 | ||
| NAME = ; DESC = Excess transmit burst size in bytes; HELP = Uncommitted transmit burst size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.6.1.13 | ||
| NAME = ; DESC = Excess receive burst size in bytes; HELP = Uncommitted transmit burst size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapPriority | 1.3.6.1.4.1.335.1.4.7.1.6.1.14 | ||
| NAME = ; DESC = Transfer priority level for data on \ this SVC; HELP = All data on this SVC will be sent \ through the switches at \ the requested transfer priority level; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapEntryStatus | 1.3.6.1.4.1.335.1.4.7.1.6.1.15 | ||
| NAME = ; DESC = Indicates whether or not this entry is \ enabled; HELP = Enabled indicates this entry will be used \ to establish an SVC connection. Disabled \ indicates this entry is to be ignored when \ establishing SVC connections. This allows \ these SVCs entries to be disabled/enabled \ without having to reenter the entire entry; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| mcmFrSVCMapTransferPriority | 1.3.6.1.4.1.335.1.4.7.1.6.1.16 | ||
| NAME = ; DESC = The transfer priority for the corresponding \ pass-through network connection.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| mcmFrSVCMapDisableCause | 1.3.6.1.4.1.335.1.4.7.1.6.1.17 | ||
| NAME = ; DESC = The cause code describing the reason that \ the SVC was not established.; \ HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | the-PVC-does-not-exist-ie-unassigned(1), no-route-to-specified-transit-network(2), no-route-to-destination(3), channel-unacceptable(6), call-awarded-and-being-delivered-in-an-est-channel(7), normal-call-clearing(16), remote-PVC-already-connected-ie-busy(17), no-user-present-in-call(18), remote-PVC-down-ie-unavailable(21), destination-out-of-order(27), invalid-number-format(28), facility-rejected(29), response-to-status-inquiry(30), normal-unspecified(31), no-DLCI-available(34), network-out-of-order(38), permanent-frame-mode-connection-out-of-service(39), permanent-frame-mode-connection-operational(40), temporary-failure(41), switching-equipment-congestion(42), access-information-discarded(43), specified-DLCI-unavailable(44), resource-unavailable(47), quality-of-service-not-available(49), requested-facility-not-subscribed(50), bearer-capability-not-authorized(57), bearer-capability-not-presently-available(58), service-or-option-not-available-unspecified(63), bearer-capability-not-implemented(65), channel-type-not-implemented(66), only-restricted-digital-capability-is-available(70), service-or-option-not-implemented-unspecified(79), invalid-call-reference(81), identified-channel-does-not-exist(82), user-not-member-of-CUG(87), incompatible-destination(88), non-existent-CUG(90), invalid-transit-network-selection(91), invalid-message-unspecified(95), missing-element(96), message-type-unknown(97), message-not-compatible(98), element-non-existent-or-not-implemented(99), invalid-element(100), invalid-message-for-state(101), timer-recovery(102), protocol-error-unspecified(111), interworking-unspecified(127), normal-condition(128) | ||
| mcmFrSvcMapSvcIfIndex | 1.3.6.1.4.1.335.1.4.7.1.6.1.18 | ||
| NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the physical Interface \ this SVC DLCI is associated with.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCMapDiscardPriority | 1.3.6.1.4.1.335.1.4.7.1.6.1.19 | ||
| NAME = ; DESC = The discard priority used for connection \ setup of this SVC map.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | low-discard-level(1), medium-discard-level(2), high-discard-level(3) | ||
| mcmFrSVCMapSetupPriority | 1.3.6.1.4.1.335.1.4.7.1.6.1.20 | ||
| NAME = ; DESC = This object indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrSVCMapHoldingPriority | 1.3.6.1.4.1.335.1.4.7.1.6.1.21 | ||
| NAME = ; DESC = This object indicates the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrPVCMapTable | 1.3.6.1.4.1.335.1.4.7.1.7 | ||
| NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table for PVC to VP bindings; HELP = This table will give the PVC \ DLCI address to be bound to the \ specified Virtual Port; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrPVCMapEntry | |||
| mcmFrPVCMapEntry | 1.3.6.1.4.1.335.1.4.7.1.7.1 | ||
| NAME = ; DESC = Entry in the PVC to VP binding \ table; HELP = PVC/VP binding entry in the PVC \ binding table. Multiple PVCs \ (DLCIs) may be bound to a single \ VP (ifindex).; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrPVCMapEntry | |||
| mcmFrPVCMapVirtualPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.7.1.1 | ||
| NAME = ; DESC = Virtual port ifIndex associated \ with this PVC DLCI; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPVCMapDLCI | 1.3.6.1.4.1.335.1.4.7.1.7.1.2 | ||
| NAME = ; DESC = Local DLCI to the remote that is \ associated with the corresponding \ virtual port; HELP = A DLCI for any given interface \ may be bound to only one virtual \ port; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPVCMapState | 1.3.6.1.4.1.335.1.4.7.1.7.1.3 | ||
| NAME = ; DESC = Indicates the current state of \ the PVC DLCI; HELP = States may be invalid, active or \ inactive; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | invalid(1), active(2), inactive(3) | ||
| mcmFrPVCMapEntryStatus | 1.3.6.1.4.1.335.1.4.7.1.7.1.4 | ||
| NAME = ; DESC = Indicates whether or not this entry is \ enabled; HELP = Enabled indicates this entry will be used \ to associate a PVC DLCI with a virtual \ port. Disable indicates this entry is to \ be ignored when mapping PVC dlcis to \ virtual ports. This allows the PVC map \ entries to be disabled/enabled without \ having to reenter the entire entry; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2) | ||
| mcmFrPVCMapPhysIfIndex | 1.3.6.1.4.1.335.1.4.7.1.7.1.5 | ||
| NAME = ; DESC = Physical interface this PVC \ is associated with.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCCircuitTable | 1.3.6.1.4.1.335.1.4.7.1.8 | ||
| NAME = ; DESC = Table of entries for SVCs on this \ access device; HELP = A table containing information \ about specific SVC Data Link \ Connection Identifiers; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrCircuitEntry | |||
| mcmFrSVCCircuitEntry | 1.3.6.1.4.1.335.1.4.7.1.8.1 | ||
| NAME = ; DESC = The information regarding a \ single SVC DLCI circuit; HELP = An entry into the SVC circuit \ table; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrCircuitEntry | |||
| mcmFrSVCCircuitIfIndex | 1.3.6.1.4.1.335.1.4.7.1.8.1.1 | ||
| NAME = ; DESC = The ifIndex Value of the ifEntry \ this SVC virtual circuit is linked with; HELP = The ifIndex for the interface on \ which this PVC belongs; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrSVCCircuitDNA | 1.3.6.1.4.1.335.1.4.7.1.8.1.2 | ||
| NAME = ; DESC = The destination DNA for the SVC; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..34) | ||
| mcmFrSVCCircuitDlci | 1.3.6.1.4.1.335.1.4.7.1.8.1.3 | ||
| NAME = ; DESC = The Data Link Connection Identifier \ for this virtual circuit; HELP = The local DLCI for this SVC, valid \ only when the connection has been \ established; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| mcmFrSVCCircuitState | 1.3.6.1.4.1.335.1.4.7.1.8.1.4 | ||
| NAME = ; DESC = Indication for the state of this SVC (active \ or inactive). HELP = Only the configured SVCs can be in \ the inactive state (all learned \ SVCs will be deleted when the connection \ has been released); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | invalid(1), active(2), inactive(3) | ||
| mcmFrSVCCircuitReceivedFECNs | 1.3.6.1.4.1.335.1.4.7.1.8.1.5 | ||
| NAME = ; DESC = Number of frames received from \ the network indicating forward \ congestion.; HELP = Number of Frame Relay Packets \ received on the corresponding \ DLCI with the Forward congestion \ bit set since this SVC was created; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrSVCCircuitReceivedBECNs | 1.3.6.1.4.1.335.1.4.7.1.8.1.6 | ||
| NAME = ; DESC = Number of frames received from \ the network indicating backward \ congestion; HELP = Number of Frame Relay Packets received \ on the corresponding interface with the \ backwards congestion bit set since this \ SVC was created.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrSVCCircuitSentFrames | 1.3.6.1.4.1.335.1.4.7.1.8.1.7 | ||
| NAME = ; DESC = The number of frames sent from \ this switched virtual circuit \ since this was counter was last \ reset; HELP = Number of Frame Relay Packets sent \ on the corresponding SVC since this \ counter was last reset (either by \ reboot of access device or a counter reset \ initiated by a user...Note that user initiated \ counter resets have been OBSOLETED for \ software releases beginning with Release 3.0.); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrSVCCircuitSentOctets | 1.3.6.1.4.1.335.1.4.7.1.8.1.8 | ||
| NAME = ; DESC = The number of octets sent from \ this switched virtual circuit since \ it was last created or reset; HELP = Number of bytes sent on the \ corresponding SVC since this counter \ was last reset (either by reboot of access device \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrSVCCircuitReceivedFrames | 1.3.6.1.4.1.335.1.4.7.1.8.1.9 | ||
| NAME = ; DESC = Number of frames received over \ this virtual circuit since it \ was created or the counter was \ last reset; HELP = Number of Frame Relay Packets received \ on the corresponding SVC since this \ counter was last reset (either by reboot \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrSVCCircuitReceivedOctets | 1.3.6.1.4.1.335.1.4.7.1.8.1.10 | ||
| NAME = ; DESC = Number of octets received over \ this virtual circuit since it \ was created or the counter was \ last reset; HELP = Number of octets received \ on the corresponding SVC since this \ counter was last reset (either by reboot \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrSVCCircuitCreationTime | 1.3.6.1.4.1.335.1.4.7.1.8.1.11 | ||
| NAME = ; DESC = The value of sysUpTime when the \ switched virtual circuit was \ created.;; HELP = The sysUpTime when the SVC was created \ either at bootup time or when the SVC \ was set up through Q.933, whether by the \ Data Link Connection Management Interface or \ by a SetRequest; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mcmFrSVCCircuitCallOriginator | 1.3.6.1.4.1.335.1.4.7.1.8.1.12 | ||
| NAME = ; DESC = DNA of the SVC call originator.; HELP = DNA of the node that originated \ the call that resulted in \ the establishment of the SVC; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..34) | ||
| mcmFrSVCCircuitLastTimeChange | 1.3.6.1.4.1.335.1.4.7.1.8.1.13 | ||
| NAME = ; DESC = The value of sysUpTime when the state \ of the SVC last changed.; HELP = The sysUpTime of the last status change \ in the SVC. (For SVCs established by the \ remote, the last time change should be \ equal to the SVC creation time); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mcmFrSVCCircuitCommittedBurst | 1.3.6.1.4.1.335.1.4.7.1.8.1.14 | ||
| NAME = ; DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \ This information is redundant. It has been replaced by mcmFrSVCCircuitNedTxThroughput and mcmFrCircuitNexRxThroughput which are objects \ from this same table(mcmFrSVCCircuitTable).;\ Maximum amount of data that the network agrees \ transfer under normal conditions over a set \ measurement interval.; HELP = The maximum rate at which the network \ agrees to transfer under normal (non- \ congested) conditions (expressed in bits \ per second).; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitExcessBurst | 1.3.6.1.4.1.335.1.4.7.1.8.1.15 | ||
| NAME = ; DESC = *******NOTE: THIS OBJECT IS DEPRECATED*******\ This information is redundant. It has been replaced by mcmFrSVCCircuitNegTxExceess and \ and mcmFrSVCCircuitNegRxExceess which are objects \ from this same table.(mcmFrSVCCircuitTable);\ The maximum number of uncommited bits \ that the frame relay network will attempt \ to deliver (expressed in bits per second).; \ HELP = This variable indicates the maximum \ amount of uncommitted data bits \ that the network will attempt to \ deliver over the measurement interval. \ By default, if not configured when \ creating the entry, the Excess \ information Burst Size is set \ to the value of ifSpeed; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitThroughput | 1.3.6.1.4.1.335.1.4.7.1.8.1.16 | ||
| NAME = ; DESC = The average number of 'Frame Relay \ Information Field' bits transferred \ per second across a physical frame relay \ interface.; HELP = Throughput is the average number of \ 'Frame Relay Information Field' \ bits transferred per second across a \ user network interface in one \ direction, measured over the \ measurement interval. If the configured \ commited burst rate and throughput \ are both non-zero, the measurement interval \ T=mcmFrSVCCircuitCommittedBurst/mcmFrSVC- \ CircuitThroughput. If the configured \ committed burst rate and throughput are \ both zero, the measurement interval\ T=mcmFrSVCCircuitExcessBurst/ifSpeed; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitNegMaxTxSize | 1.3.6.1.4.1.335.1.4.7.1.8.1.17 | ||
| NAME = ; DESC = The negotiated maximum Tx size to \ be sent on this interface (in bytes).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| mcmFrSVCCircuitNegMaxRxSize | 1.3.6.1.4.1.335.1.4.7.1.8.1.18 | ||
| NAME = ; DESC = The negotiated maximum Rx size to \ be received on this interface (in bytes).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| mcmFrSVCCircuitNegTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.8.1.19 | ||
| NAME = ; DESC = The negotiated Tx throughput to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitNegRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.8.1.20 | ||
| NAME = ; DESC = The negotiated Rx throughput to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitNegTxBurst | 1.3.6.1.4.1.335.1.4.7.1.8.1.21 | ||
| NAME = ; DESC = The negotiated Tx committed burst to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitNegRxBurst | 1.3.6.1.4.1.335.1.4.7.1.8.1.22 | ||
| NAME = ; DESC = The negotiated Rx committed burst to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitNegTxExcess | 1.3.6.1.4.1.335.1.4.7.1.8.1.23 | ||
| NAME = ; DESC = The negotiated Tx excess burst to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitNegRxExcess | 1.3.6.1.4.1.335.1.4.7.1.8.1.24 | ||
| NAME = ; DESC = The negotiated Rx excess burst to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrSVCCircuitTxDiscardCIRPolice | 1.3.6.1.4.1.335.1.4.7.1.8.1.25 | ||
| NAME = ; DESC = The number of packets that have been discarded \ due to policing of the CIR.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrSVCCircuitPriority | 1.3.6.1.4.1.335.1.4.7.1.8.1.26 | ||
| NAME = ; DESC = The transfer priority used for connection \ setup of this SVC.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| mcmFrSVCCircuitSvcIfIndex | 1.3.6.1.4.1.335.1.4.7.1.8.1.27 | ||
| NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the physical interface \ this SVC DLCI is assoiciated with.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCCircuitDiscardPriority | 1.3.6.1.4.1.335.1.4.7.1.8.1.28 | ||
| NAME = ; DESC = The discard priority used for SVC circuit \ connection setup of this SVC map.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | low-discard-level(1), medium-discard-level(2), high-discard-level(3) | ||
| mcmFrSVCCircuitSetupPriority | 1.3.6.1.4.1.335.1.4.7.1.8.1.29 | ||
| NAME = ; DESC = This object indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrSVCCircuitHoldingPriority | 1.3.6.1.4.1.335.1.4.7.1.8.1.30 | ||
| NAME = ; DESC = This object indicates the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| nvmFrGlobalGroup | 1.3.6.1.4.1.335.1.4.7.1.9 | ||
| OBJECT IDENTIFIER | |||
| nvmFrMaxDLCI | 1.3.6.1.4.1.335.1.4.7.1.9.1 | ||
| NAME = ; DESC = The maximum number of DLCI that \ may be configured for the entire \ access device; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrMaxVirtualPorts | 1.3.6.1.4.1.335.1.4.7.1.9.2 | ||
| NAME = ; DESC = The maximum number of ports that \ may be configured for the entire \ access device; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..32 | ||
| nvmFrMaxDlciPerLine | 1.3.6.1.4.1.335.1.4.7.1.9.3 | ||
| NAME = ; DESC = The maximum number of DLCIs that may \ be configured for a Frame Relay line; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrDNANumberingPlan | 1.3.6.1.4.1.335.1.4.7.1.9.4 | ||
| NAME = ; DESC = The value of this object designates the \ numbering plan of the DNA; HELP = The number plan is used in conjunction \ with a DNA. This object identifies the \ type of call as E.164 or X.121; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | e164(1), x121(3) | ||
| nvmFrPanlLmiTrapEnable | 1.3.6.1.4.1.335.1.4.7.1.9.5 | ||
| NAME = ; DESC = This object specifies whether the generation of \ Trap messages are enabled/disabled for the FR \ PANL LMI module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| nvmFrMsmTrapEnable | 1.3.6.1.4.1.335.1.4.7.1.9.6 | ||
| NAME = ; DESC = This object specifies whether the generation of \ Trap messages are enabled/disabled for the FR \ MSM module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| nvmFrCoreTrapEnable | 1.3.6.1.4.1.335.1.4.7.1.9.7 | ||
| NAME = ; DESC = This object specifies whether the generation of \ Trap messages are enabled/disabled for the FR \ Core module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| nvmFrPlmTrapEnable | 1.3.6.1.4.1.335.1.4.7.1.9.8 | ||
| NAME = ; DESC = This object specifies whether the generation of \ Trap messages are enabled/disabled for the FR \ Plm module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| nvmFrPhyPortTable | 1.3.6.1.4.1.335.1.4.7.1.10 | ||
| NAME = ; DESC = Table of physical port entries \ contianing flow control info and \ statistics; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrPhyPortEntry | |||
| nvmFrPhyPortEntry | 1.3.6.1.4.1.335.1.4.7.1.10.1 | ||
| NAME = ; DESC = Entry for a Frame Relay physical \ port; HELP = Entry for a Frame Relay physical \ port, containing flow control \ information and statistics NOT \ included in the RFC 1315 mib; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrPhyPortEntry | |||
| nvmFrPhyPortExtIfIndex | 1.3.6.1.4.1.335.1.4.7.1.10.1.1 | ||
| NAME = ; DESC = IfIndex of the physical port the \ extention information (this entry) \ is associated with; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| nvmFrPhyPortFlowControl | 1.3.6.1.4.1.335.1.4.7.1.10.1.2 | ||
| NAME = Frame Relay Flow Control; DESC = Whether or not policing, based on \ congestion should be enforced; HELP = Enabling this feature will allow packets \ exceeding the current allowable rate \ to be dropped if congestion has been \ detected on the network.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| nvmFrPhyPortThroughput | 1.3.6.1.4.1.335.1.4.7.1.10.1.3 | ||
| NAME = Frame Relay DLCI Throughput; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced with \ new objects TxThroughput, RxThroughput. \ Default throughput for a PVC; HELP = Defalut throughput used for all \ PVCs on the same frame relay \ physical interface. Will be \ assigned to a PVC when the PVC \ is created. valid if flow cntl \ is enabled ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrPhyPortDelta | 1.3.6.1.4.1.335.1.4.7.1.10.1.4 | ||
| NAME = Frame Relay Delta; DESC = Delta time interval to increase or \ decrease the transmit rate by \ monitoring the number of frames \ received with the FECN bit cleared \ or set. Note that for software releases \ beginning with R3.0, the range has been \ expanded from (1..100) to (1..255).; HELP = Typically 4 types end-to-end \ transit delay. Used only if flow \ control is enabled. (In 1 second \ units.) Valid if flow cntl is enabled; CAPABILITIES =; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| nvmFrPhyPortConsectiveFrames | 1.3.6.1.4.1.335.1.4.7.1.10.1.5 | ||
| NAME = ; DESC = Number of consecutive frames received \ with the BECN bit set before reducing \ the transmit rate; HELP = Transmit rate is increased \ when S/2 consecutive frames \ are received with teh BECN bit cleared. \ Valid only when flow control is enabled.\ See CCITT Q.922 Appendix I, for the \ method to compute parameter S.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| nvmFrPhyPortMtuSize | 1.3.6.1.4.1.335.1.4.7.1.10.1.6 | ||
| NAME = ; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced with \ new objects TxMaxFrameSize, RxMaxFrameSize. \ Maximum Transmission Unit Size; HELP = Maximum Packet size that can be \ passed to frame Relay and will \ be sent across the Frame Relay \ network.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| nvmFrPhyPortTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.10.1.7 | ||
| NAME = Frame Relay DLCI Tx Throughput; DESC = The transmission CIR expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrPhyPortRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.10.1.8 | ||
| NAME = Frame Relay DLCI Rx Throughput; DESC = The receive CIR expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrPhyPortTxMaxFrameSize | 1.3.6.1.4.1.335.1.4.7.1.10.1.9 | ||
| NAME = ; DESC = The maximum transmission FR packet size \ expressed in bytes.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4096 | ||
| nvmFrPhyPortRxMaxFrameSize | 1.3.6.1.4.1.335.1.4.7.1.10.1.10 | ||
| NAME = ; DESC = The maximum receive FR packet size \ expressed in bytes.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4096 | ||
| nvmFrPhyPortRateEnf | 1.3.6.1.4.1.335.1.4.7.1.10.1.11 | ||
| NAME = ; DESC = The rate enforcement enabled or disabled \ parameter for FR congestion management \ processing.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enabled(1), disabled(2) | ||
| nvmFrPhyPortTxBc | 1.3.6.1.4.1.335.1.4.7.1.10.1.12 | ||
| NAME = ; DESC = The transmission committed burst size \ expressed in bits.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrPhyPortRxBc | 1.3.6.1.4.1.335.1.4.7.1.10.1.13 | ||
| NAME = ; DESC = The receive committed burst size \ expressed in bits.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrPhyPortTxBe | 1.3.6.1.4.1.335.1.4.7.1.10.1.14 | ||
| NAME = ; DESC = The transmission excess burst size \ expressed in bits.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrPhyPortRxBe | 1.3.6.1.4.1.335.1.4.7.1.10.1.15 | ||
| NAME = ; DESC = The receive excess burst size \ expressed in bits.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrPVCPhyTable | 1.3.6.1.4.1.335.1.4.7.1.11 | ||
| NAME = ; DESC = Table that extends the RFC 1315 \ DLCMI table contianing info \ about the PVC LMI; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrPVCPhyEntry | |||
| nvmFrPVCPhyEntry | 1.3.6.1.4.1.335.1.4.7.1.11.1 | ||
| NAME = ; DESC = Entry into the micom PVC LMI \ configuration extensions; HELP = Entry in the PVC Phys Table. \ Additional information required \ (not in RFC 1315 DLCI table); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrPVCPhyEntry | |||
| nvmFrPVCPhyIfIndex | 1.3.6.1.4.1.335.1.4.7.1.11.1.1 | ||
| NAME = ; DESC = IfIndex of the physical port \ the extension information \ is associated with; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| nvmFrPVCLMIMode | 1.3.6.1.4.1.335.1.4.7.1.11.1.2 | ||
| NAME = ; DESC = Indicates whether the local PVC \ LMI is performing in the DTE or \ DCE mode; HELP = DTE or DCE mode of operation for \ the Frame Relay PVC LMI. (In DTE \ mode the Status Enquiry messages \ will be sent. In DCE mode, Status \ Reports will be sent in response \ to Status Enquiry mesages.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | dte(1), dce(2) | ||
| nvmFrPVCBiDir | 1.3.6.1.4.1.335.1.4.7.1.11.1.3 | ||
| NAME = ; DESC = Indicates whether the PVC LMI \ should perform both sending \ status enquiries and sending \ status reports; HELP = Must be with bilateral agreement \ with the switch enabled. Switch \ may send status enquiry messages \ as defined for the DTEs and allows \ the DTE to respond with a status \ messages in the same way as switch \ does (in this mode Status Enquiries \ will still be transmitted normally; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | true(1), false(2) | ||
| nvmFrSVCPhyTable | 1.3.6.1.4.1.335.1.4.7.1.12 | ||
| NAME = ; DESC = Table containing the SVC default \ parameters ; HELP = Table containing default SVC \ parameters to be used if none \ are specified when configuring \ an SVC; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrSVCPhyEntry | |||
| nvmFrSVCPhyEntry | 1.3.6.1.4.1.335.1.4.7.1.12.1 | ||
| NAME = ; DESC = Entry into the SVC Default\ parameter table; HELP = Each entry contains the default \ SVC parameters for the specified \ interface; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrSVCPhyEntry | |||
| nvmFrSVCPhyIfIndex | 1.3.6.1.4.1.335.1.4.7.1.12.1.1 | ||
| NAME = ; DESC = IfIndex of the physical port \ the SVC information is \ associated with; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| nvmFrSVCState | 1.3.6.1.4.1.335.1.4.7.1.12.1.2 | ||
| NAME = ; DESC = SVC LMI Protocol to be used; HELP = SVC LMI Protocol to be used \ on this interface. (All \ SVC connection setup must \ use the same protocol); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | q933svc(1) | ||
| nvmFrSVCT303 | 1.3.6.1.4.1.335.1.4.7.1.12.1.3 | ||
| NAME = ; DESC = The duration, in seconds, \ of the setup timer for SVCs. \ ; HELP = How long the SVC LMI will wait \ for a response from the network \ (e.g. call proceeding, connect) \ before the setup message will be \ retransmitted. In 1 second unit. \ Q.931 recommends 4 seconds. Causes at \ most one Setup retransmission; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrSVCT305 | 1.3.6.1.4.1.335.1.4.7.1.12.1.4 | ||
| NAME = ; DESC = The duration of the Disconnect \ timer (in seconds) for SVCs.; HELP = How long the SVC LMI will wait \ for a release message from the \ network before it will transmit \ a release message. (The SVC LMI \ will then wait for a release \ message from the network.) In 1 second \ unit. Q.931 recommends 30 seconds.\ Causes at most one release \ transmit; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrSVCT308 | 1.3.6.1.4.1.335.1.4.7.1.12.1.5 | ||
| NAME = ; DESC = The duration of Release timer. ; HELP = How long the SVC LMI will wait \ for a response from the network \ before the release message will \ be retransmitted. (When the \ second release is transmitted, \ the local SVC LMI considers \ the corresponding SVC to have \ been released by the network \ as well - even if no response \ is received.) In 1 second unit. \ Q.931 recommends 4 seconds. \ Causes at most one release transmit; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrSVCT310 | 1.3.6.1.4.1.335.1.4.7.1.12.1.6 | ||
| NAME = ; DESC = The duration of Connect Timer.; HELP = How long the SVC LMI will wait \ (in seconds) for a Connect message \ (after receiving the Call Proceeding \ message) before sending a Release \ message. In 1 second units. Q.931 \ recommends a duration between 30\ to 120 seconds on the DTE side and \ 10 seconds on the DCE side Causes connection disconnection; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrSVCMaxCalls | 1.3.6.1.4.1.335.1.4.7.1.12.1.7 | ||
| NAME = ; DESC = Maximum number of SVC Connections; HELP = For all SVCs, including both \ incoming and outgoing; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrSVCMaxTxSize | 1.3.6.1.4.1.335.1.4.7.1.12.1.8 | ||
| NAME = ; DESC = Default Maximum transmit frame size, \ in bytes, to negotiate with the remote; HELP = This value will be used only if a \ specific value is not included in the \ Connect Request primitive. A value of \ 0 indicates the network default values \ are to be used (unless it is passed down \ at connect time). Expressed in bytes. CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| nvmFrSVCMaxRxSize | 1.3.6.1.4.1.335.1.4.7.1.12.1.9 | ||
| NAME = ; DESC = Maximum receive frame size in bytes; HELP = Default value for the maximum receive \ frame size to negotiate with the remote \ This value will be used only if a \ specific value is not included in the \ Connect Request primitive. A value of \ 0 indicates the network default values \ are to be used (unless it is passed down \ at connect time). Expressed in bytes. CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| nvmFrSVCMinDLCI | 1.3.6.1.4.1.335.1.4.7.1.12.1.10 | ||
| NAME = ; DESC = Lowest DLCI value for SVCs on \ this network; HELP = This value applies only to SVC connections. \ PVC DLCI connections may be established \ above or below this value.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 17..991 | ||
| nvmFrSVCMaxDLCI | 1.3.6.1.4.1.335.1.4.7.1.12.1.11 | ||
| NAME = ; DESC = Highest DLCI value for SVCs on \ the this network; HELP = This value applies only to SVC connections. \ PVC DLCI connections may be established \ above or below this value.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 17..991 | ||
| nvmFrSVCMinTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.12.1.12 | ||
| NAME = ; DESC = Minimum transmit throughput in \ bits per seconds; HELP = Minimum transmit throughput in \ bits per second, to negotiate with \ the remote (used along with the \ maximum transmit throughput) \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMinRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.12.1.13 | ||
| NAME = ; DESC = Minimum receive throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ maximum receive throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMaxTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.12.1.14 | ||
| NAME = ; DESC = Maximum transmit throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ minimum transmit throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be use; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMaxRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.12.1.15 | ||
| NAME = ; DESC = Maximum receive throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ minimum receive throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.12.1.16 | ||
| NAME = ; DESC = Transmit burst size in bytes; HELP = Default Committed Transmit burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.12.1.17 | ||
| NAME = ; DESC = Receive burst size in bytes; HELP = Default Committed Receive burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.12.1.18 | ||
| NAME = ; DESC = Excess transmit burst size in bytes; HELP = Default Uncommitted Transmit burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.12.1.19 | ||
| NAME = ; DESC = Excess receive burst size in bytes; HELP = Default Uncommitted Receive burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrVirtualPortTable | 1.3.6.1.4.1.335.1.4.7.1.13 | ||
| NAME = ; DESC = Table to provide the mapping between \ virtual ports and physical ports \ and to define the virtual port \ parameters; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrVirtualPortEntry | |||
| nvmFrVirtualPortEntry | 1.3.6.1.4.1.335.1.4.7.1.13.1 | ||
| NAME = ; DESC = Each entry in this table contains \ information to define a virtual \ port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrVirtualPortEntry | |||
| nvmFrVirtualPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.13.1.1 | ||
| NAME = Virtual Port Interface Number; DESC = IfIndex associated with this port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrVirtualPortPhyPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.13.1.2 | ||
| NAME = ; DESC = *******NOTE: THIS OBJECT IS OBSOLETE******* This information is no longer useful for \ virtual ports. The virtual ports no longer \ have an underlying network. Only SVC DNAs \ and PVC DLCIs are associated with VPs now. \ The underlying MPANL will take care of which \ link the SVC is to be made on and a Physical \ Line IfIndex has been added to the PVCs. VP \ are no longer required to provide the backup \ link support (MPANL now does that).\ IfIndex of the Frame Relay physical \ port for which the virtual port is \ (or will be) linked to; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrVirtualPortPPA | 1.3.6.1.4.1.335.1.4.7.1.13.1.3 | ||
| NAME = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ Virtual Port PPA Number; DESC = Point of Physical attachment for \ this port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..254 | ||
| nvmFrVirtualPortMode | 1.3.6.1.4.1.335.1.4.7.1.13.1.4 | ||
| NAME = Virtual Port Mode; HELP = Mode of the virtual port; DESC = Easy Routing requires that data \ will be switched between the \ Virtual Circuits on the this \ virutal port. Basic mode turns \ off the switching mode; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | basic(1), easyRouting(2) | ||
| nvmFrVirtualPortEntryStatus | 1.3.6.1.4.1.335.1.4.7.1.13.1.5 | ||
| NAME = Virtual Port Mode; DESC = Virtual port row status; HELP = Indicates whether or not this \ entry is valid; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2), delete(3) | ||
| nvmFrVirtualPortProtocolBinding | 1.3.6.1.4.1.335.1.4.7.1.13.1.6 | ||
| NAME = ; DESC = Bitmap that contains the protocols bound. \ to this Virtual Port; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | ip-configured(1), ipx-configured(2), ip-and-ipx-configured(3), bridge-configured(4), ip-and-bridge-configured(5), ipx-and-bridge-configured(6), ip-and-ipx-and-bridge-configured(7), sNA-configured(8), x25-configured(9) | ||
| nvmFrVirtualPortNumber | 1.3.6.1.4.1.335.1.4.7.1.13.1.7 | ||
| NAME = ; DESC = This object specifies the Virtual \ Port Number used as an identifier \ for a Virtual Port. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..254 | ||
| nvmFrSVCMapTable | 1.3.6.1.4.1.335.1.4.7.1.14 | ||
| NAME = ; DESC = Table for SVC to VP bindings; HELP = This table will give the SVC \ DNA address to be bound to the \ specified Virtual Port; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrSVCMapEntry | |||
| nvmFrSVCMapEntry | 1.3.6.1.4.1.335.1.4.7.1.14.1 | ||
| NAME = ; DESC = Entry in the SVC to VP binding \ table; HELP = SVC/VP binding entry in the SVC \ binding table. Multiple SVCS \ (DNAs) may be bound to a single \ VP (ifindex); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrSVCMapEntry | |||
| nvmFrSVCMapVirtualPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.14.1.1 | ||
| NAME = ; DESC = Virtual Port ifIndex associated \ with this DNA; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| nvmFrSVCMapDNA | 1.3.6.1.4.1.335.1.4.7.1.14.1.2 | ||
| NAME = ; DESC = Remote DNA to associate with \ the corresponding virtual port; HELP = DNA to be mapped to the \ corresponding virtual port. \ This will be used to create \ an SVC to the corresponding \ remote DNA; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..34) | ||
| nvmFrSVCMapMaxTxSize | 1.3.6.1.4.1.335.1.4.7.1.14.1.3 | ||
| NAME = ; DESC = Maximum transmit frame size to \ negotiate with the remote (in \ bytes); HELP = This value will override the default values for \ the physical interface. A value \ of 0 indicates the networks default \ values are to be used. Experessed in \ bytes; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| nvmFrSVCMapMaxRxSize | 1.3.6.1.4.1.335.1.4.7.1.14.1.4 | ||
| NAME = ; DESC = Maximum receive frame size to \ negotiate with the remote (in \ bytes); HELP = This value will override the default values for \ the physical interface. A value \ of 0 indicates the networks default \ values are to be used. Experessed in \ bytes; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| nvmFrSVCMapMinTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.14.1.5 | ||
| NAME = ; DESC = Minimum transmit throughput in \ bits per second; HELP = Used with the maximum transmit throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMapMinRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.14.1.6 | ||
| NAME = ; DESC = Minimum receive throughput in \ bits per second; HELP = Used with the maximum receive throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMapMaxTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.14.1.7 | ||
| NAME = ; DESC = Maximum transmit throughput in \ bits per second; HELP = Used with the minimum transmit throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMapMaxRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.14.1.8 | ||
| NAME = ; DESC = Maximum receive throughput in \ bits per second; HELP = Used with the minimum receive throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMapTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.14.1.9 | ||
| NAME = ; DESC = Transmit burst size in bytes; HELP = Committed transmit busrt size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMapRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.14.1.10 | ||
| NAME = ; DESC = Receive burst size in bytes; HELP = Committed receive busrt size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMapExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.14.1.11 | ||
| NAME = ; DESC = Excess transmit burst size in bytes; HELP = Uncommitted transmit busrt size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMapExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.14.1.12 | ||
| NAME = ; DESC = Excess receive burst size in bytes; HELP = Uncommitted transmit busrt size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrSVCMapPriority | 1.3.6.1.4.1.335.1.4.7.1.14.1.13 | ||
| NAME = ; DESC = Transfer priority level for data on \ this SVC; HELP = All data on this SVC will be sent \ through the switches at \ the requested transfer priority level; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| nvmFrSVCMapEntryStatus | 1.3.6.1.4.1.335.1.4.7.1.14.1.14 | ||
| NAME = ; DESC = Indicates whether or not this entry is \ enabled; HELP = Enabled indicates this entry will be used \ to establish an SVC connection. Disabled \ indicates this entry is to be ignored when \ establishing SVC connections. This allows \ these SVCs entries to be disabled/enabled \ without having to reenter the entire entry; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2), delete(3) | ||
| nvmFrSVCMapTransferPriority | 1.3.6.1.4.1.335.1.4.7.1.14.1.15 | ||
| NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| nvmFrSVCMapRowStatus | 1.3.6.1.4.1.335.1.4.7.1.14.1.16 | ||
| NAME = ; DESC = This object is used to add new rows \ in the SVC to VP bindings table, modify existing \ rows,and to delete existing rows (Configuration); HELP = To add a new row, createAndGo (4) is used. \ To modify an existing row, active (1) is \ used. To delete an existing row, \ destroy (6) is used. ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), createAndGo(4), destroy(6) | ||
| nvmFrSVCMapDiscardPriority | 1.3.6.1.4.1.335.1.4.7.1.14.1.17 | ||
| NAME = ; DESC = The discard priority used for connection \ setup of this SVC map.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | low-discard-level(1), medium-discard-level(2), high-discard-level(3) | ||
| nvmFrSVCMapSetupPriority | 1.3.6.1.4.1.335.1.4.7.1.14.1.18 | ||
| NAME = ; DESC = This object specifies the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| nvmFrSVCMapHoldingPriority | 1.3.6.1.4.1.335.1.4.7.1.14.1.19 | ||
| NAME = ; DESC = This object specifies the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| nvmFrPVCMapTable | 1.3.6.1.4.1.335.1.4.7.1.15 | ||
| NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table for PVC to VP bindings; HELP = This table will give the PVC \ DLCI address to be bound to the \ specified Virtual Port; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrPVCMapEntry | |||
| nvmFrPVCMapEntry | 1.3.6.1.4.1.335.1.4.7.1.15.1 | ||
| NAME = ; DESC = Entry in the PVC to VP binding \ table; HELP = PVC/VP binding entry in the PVC \ binding table. Multiple PVCs \ (DLCIs) may be bound to a single \ VP (ifindex).; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrPVCMapEntry | |||
| nvmFrPVCMapVirtualPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.15.1.1 | ||
| NAME = ; DESC = Virtual port ifIndex associated \ with this PVC DLCI; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| nvmFrPVCMapDLCI | 1.3.6.1.4.1.335.1.4.7.1.15.1.2 | ||
| NAME = ; DESC = Local DLCI to the remote that is \ to be associated with the \ corresponding virtual port; HELP = A DLCI for any given interface \ may be bound to only one virtual \ port; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 17..126975 | ||
| nvmFrPVCMapEntryStatus | 1.3.6.1.4.1.335.1.4.7.1.15.1.3 | ||
| NAME = ; DESC = Indicates whether or not this entry is \ enabled; HELP = Enabled indicates this entry will be used \ to associate a PVC DLCI with a virtual \ port. Disable indicates this entry is to \ be ignored when mapping PVC dlcis to \ virtual ports. This allows the PVC map \ entries to be disabled/enabled without \ having to reenter the entire entry; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | enable(1), disable(2), delete(3) | ||
| nvmFrPVCMapPhysIfIndex | 1.3.6.1.4.1.335.1.4.7.1.15.1.4 | ||
| NAME = ; DESC = Physical interface this PVC \ is associated with.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| nvmFrDlcmiTable | 1.3.6.1.4.1.335.1.4.7.1.16 | ||
| NAME = ; DESC = The Parameters for the Data Link Connection \ Management Interface for the frame \ relay service on this interface.; HELP = Table of standard RFC 1315 PVC LMI \ Parameters per interface (physical \ port); CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrDlcmiEntry | |||
| nvmFrDlcmiEntry | 1.3.6.1.4.1.335.1.4.7.1.16.1 | ||
| NAME = ; DESC = The Parameters for a particular Data \ Link Connection Management Interface.; HELP = Entry for the standard RFC 1315 PVC \ LMI parameters for an interface \ (physical port); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrDlcmiEntry | |||
| nvmFrDlcmiIfIndex | 1.3.6.1.4.1.335.1.4.7.1.16.1.1 | ||
| NAME = ; DESC = The ifIndex of the physical interface \ for the corresponding PVC LMI \ parameters to be updated; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrDlcmiState | 1.3.6.1.4.1.335.1.4.7.1.16.1.2 | ||
| NAME = ; DESC = This variable states which Data Link \ Connection Management scheme is \ active (and by implication, what \ DLCI it uses) on the Frame Relay \ interface.; HELP = The type of PVC LMI active on this \ interface. The PVC LMI selected \ must be compatable with the network \ PVC LMI running. (If no PVCs are to \ be used, the 'noLmiConfigured' option \ may be selected.); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | noLmiConfigured(1), lmi(2), itut933A(5), ansiT1617D1994(6) | ||
| nvmFrDlcmiAddress | 1.3.6.1.4.1.335.1.4.7.1.16.1.3 | ||
| NAME = ; DESC = This variable states which address \ format is in use on the Frame Relay \ interface.; HELP = Must match the address format used by the \ network; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | q921(1), q922March90(2), q922November90(3), q922(4) | ||
| nvmFrDlcmiAddressLen | 1.3.6.1.4.1.335.1.4.7.1.16.1.4 | ||
| NAME = ; DESC = This variable states which address \ length in octets.; HELP = In the case of \ Q922 format, the length indicates the \ entire length of the address including \ the control portion. Used with \ the address type to identify \ a PVC. This value must match the \ address length used by the network; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | two-octets(2), three-octets(3), four-octets(4) | ||
| nvmFrDlcmiPollingInterval | 1.3.6.1.4.1.335.1.4.7.1.16.1.5 | ||
| NAME = ; DESC = This is the number of seconds between \ successive status enquiry messages.; HELP = How often the PVC LMI status enquiry \ messages will be sent on the \ corresponding interface (measured \ in seconds); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 5..30 | ||
| nvmFrDlcmiFullEnquiryInterval | 1.3.6.1.4.1.335.1.4.7.1.16.1.6 | ||
| NAME = ; DESC = Number of status enquiry intervals \ that pass before issuance of a full \ status enquiry message.; HELP = How often a full status enquiry message \ will be sent. Measured in units of \ status enquiry interval. (Every nth \ status enquiry will be a full status \ enquiry.); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrDlcmiErrorThreshold | 1.3.6.1.4.1.335.1.4.7.1.16.1.7 | ||
| NAME = ; DESC = This is the maximum number of \ unanswered Status Enquiries the equipment \ shall accept before declaring the LMI \ down.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| nvmFrDlcmiMonitoredEvents | 1.3.6.1.4.1.335.1.4.7.1.16.1.8 | ||
| NAME = ; DESC = This is the number of status polling \ intervals over which the error threshold \ is counted.; HELP = If within \ 'MonitoredEvents' number of events \ the station receives 'ErrorThreshold' \ number of errors, the interface is \ marked as down.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..10 | ||
| nvmFrDlcmiMaxSupportedVCs | 1.3.6.1.4.1.335.1.4.7.1.16.1.9 | ||
| NAME = ; DESC = The maximum number of Virtual Circuits \ allowed for this interface.; HELP = Dictated by the Frame Relay network. In \ response to a SET, if a value less \ than zero or higher than the agent's \ maximal capability is configured, the \ agent should respond bad- Value; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| nvmFrDlcmiMulticast | 1.3.6.1.4.1.335.1.4.7.1.16.1.10 | ||
| NAME = ; DESC = This indicates whether the Frame Relay \ interface is using a multicast service.; HELP = The network \ must support a multicast service; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | nonBroadcast(1), broadcast(2) | ||
| mcmFrAllSVCCircuitTable | 1.3.6.1.4.1.335.1.4.7.1.17 | ||
| NAME = ; DESC = Table of entries for all SVCs on this \ access device.; HELP = A table containing information \ about specific SVC DLCIs; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrAllCircuitEntry | |||
| mcmFrAllSVCCircuitEntry | 1.3.6.1.4.1.335.1.4.7.1.17.1 | ||
| NAME = ; DESC = The information regarding a \ single, established SVC DLCI; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrAllCircuitEntry | |||
| mcmFrAllSVCCircuitIfIndex | 1.3.6.1.4.1.335.1.4.7.1.17.1.1 | ||
| NAME = ; DESC = The ifIndex Value of the ifEntry \ this SVC virtual circuit is associated with; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrAllSVCCircuitDlci | 1.3.6.1.4.1.335.1.4.7.1.17.1.2 | ||
| NAME = ; DESC = The local DLCI for this SVC, valid \ only when the connection has been \ established; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| mcmFrAllSVCCircuitType | 1.3.6.1.4.1.335.1.4.7.1.17.1.3 | ||
| NAME = ; DESC = The type of this SVC.; HELP = Valid types include voice, switched or \ rfc1490; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | rfc1490(1), voice(2), switched(3), rfc1490switched(4) | ||
| mcmFrAllSVCCircuitDNA | 1.3.6.1.4.1.335.1.4.7.1.17.1.4 | ||
| NAME = ; DESC = DNA of the destination node associated \ with the SVC; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..34) | ||
| mcmFrAllSVCCircuitState | 1.3.6.1.4.1.335.1.4.7.1.17.1.5 | ||
| NAME = ; DESC = Indication for the state of this SVC (active \ or inactive).; HELP = Only the configured SVCs \ can be in the inactive state (all learned \ SVCs will be deleted when the connection \ has been released); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | invalid(1), active(2), inactive(3) | ||
| mcmFrAllSVCCircuitReceivedFECNs | 1.3.6.1.4.1.335.1.4.7.1.17.1.6 | ||
| NAME = ; DESC = Number of frames received from \ the network indicating forward \ congestion since this switched \ virtual circuit was created; HELP = Number of Frame Relay Packets \ received on the corresponding \ DLCI with the Forward congestion \ bit set; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrAllSVCCircuitReceivedBECNs | 1.3.6.1.4.1.335.1.4.7.1.17.1.7 | ||
| NAME = ; DESC = Number of frames received from \ the network indicating backward \ congestion since this switched \ virtual circuit was created; HELP = Number of Frame Relay Packets received \ on the corresponding interface with the \ backward congestion bit set.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrAllSVCCircuitSentFrames | 1.3.6.1.4.1.335.1.4.7.1.17.1.8 | ||
| NAME = ; DESC = The number of frames sent from \ this switched virtual circuit \ since this counter was last \ reset; HELP = Number of Frame Relay Packets sent \ on the corresponding SVC since this \ counter was last reset (either by \ reboot of access device or a counter reset \ initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrAllSVCCircuitSentOctets | 1.3.6.1.4.1.335.1.4.7.1.17.1.9 | ||
| NAME = ; DESC = The number of octets sent from \ this switched virtual circuit since \ it was last created or reset; HELP = Number of bytes sent on the \ corresponding SVC since this counter \ was last reset (either by reboot of access device \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrAllSVCCircuitReceivedFrames | 1.3.6.1.4.1.335.1.4.7.1.17.1.10 | ||
| NAME = ; DESC = Number of frames received over \ this virtual circuit since it \ was created or the counter was \ last reset; HELP = Reset may occur either by reboot \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrAllSVCCircuitReceivedOctets | 1.3.6.1.4.1.335.1.4.7.1.17.1.11 | ||
| NAME = ; DESC = Number of octets received over \ this virtual circuit since it \ was created or the counter was \ last reset; HELP = Reset may occur either by reboot \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrAllSVCCircuitCreationTime | 1.3.6.1.4.1.335.1.4.7.1.17.1.12 | ||
| NAME = ; DESC = The value of sysUpTime when the \ switched virtual circuit was \ created; HELP = The sysUpTime when the SVC was created \ either at bootup time or when the SVC \ was set up through Q.933, whether by the Data \ Link Connection Management Interface or \ by a SetRequest; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mcmFrAllSVCCircuitCallOriginator | 1.3.6.1.4.1.335.1.4.7.1.17.1.13 | ||
| NAME = ; DESC = DNA of the node that originated \ the call that resulted in \ the establishment of the SVC; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(1..34) | ||
| mcmFrAllSVCCircuitLastTimeChange | 1.3.6.1.4.1.335.1.4.7.1.17.1.14 | ||
| NAME = ; DESC = The value of sysUpTime when last there was a change in the SVC; HELP = SVCs established by the remote will set \ the last time change to the creation time; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mcmFrAllSVCCircuitCommittedBurst | 1.3.6.1.4.1.335.1.4.7.1.17.1.15 | ||
| NAME = ; DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \ This information is redundant. This object has been \ replaced by mcmFrAllSVCCircuitNedTxThroughput and \ mcmAllFrCircuitNexRxThroughput which are objects \ from this same table(mcmFrAllSVCCircuitTable).;\ Maximum amount of data that the network agrees \ transfer under normal conditions over a set \ measurement interval.; HELP = The maximum rate at which the network \ agrees to transfer under normal (non- \ congested) conditions (expressed in bits \ per second).; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitExcessBurst | 1.3.6.1.4.1.335.1.4.7.1.17.1.16 | ||
| NAME = ; DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \ This information is redundant. This object has been \ replaced by mcmFrAllSVCCircuitNedTxThroughput and \ mcmAllFrCircuitNexRxThroughput which are objects \ from this same table(mcmFrAllSVCCircuitTable).;\ The maximum number of uncommited bits \ that the frame relay network will attempt \ to deliver (expressed in bits per second).; \ HELP = By default, if not configured when \ creating the entry, the Excess \ information Burst Size is set \ to the value of ifSpeed; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitThroughput | 1.3.6.1.4.1.335.1.4.7.1.17.1.17 | ||
| NAME = ; DESC = The average number of 'Frame Relay \ Information Field' bits transferred \ per second across a physical frame relay \ interface.; HELP = Throughput is the average number of \ 'Frame Relay Information Field' \ bits transferred per second across a \ user network interface in one \ direction, measured over the set \ measurement interval. If the configured \ commited burst rate and throughput \ are both non-zero, the measurement interval \ T=mcmFrAllSVCCircuitCommittedBurst/mcmFrSVC- \ CircuitThroughput. If the configured \ committed burst rate and throughput are \ both zero, the measurement interval\ T=mcmFrAllSVCCircuitExcessBurst/ifSpeed; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitNegMaxTxSize | 1.3.6.1.4.1.335.1.4.7.1.17.1.18 | ||
| NAME = ; DESC = The negotiated maximum Tx size to \ be sent on this interface (in bytes).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| mcmFrAllSVCCircuitNegMaxRxSize | 1.3.6.1.4.1.335.1.4.7.1.17.1.19 | ||
| NAME = ; DESC = The negotiated maximum Rx size to \ be received on this interface (in bytes).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| mcmFrAllSVCCircuitNegTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.17.1.20 | ||
| NAME = ; DESC = The negotiated Tx throughput to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitNegRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.17.1.21 | ||
| NAME = ; DESC = The negotiated Rx throughput to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitNegTxBurst | 1.3.6.1.4.1.335.1.4.7.1.17.1.22 | ||
| NAME = ; DESC = The negotiated Tx committed burst to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitNegRxBurst | 1.3.6.1.4.1.335.1.4.7.1.17.1.23 | ||
| NAME = ; DESC = The negotiated Rx committed burst to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitNegTxExcess | 1.3.6.1.4.1.335.1.4.7.1.17.1.24 | ||
| NAME = ; DESC = The negotiated Tx excess burst to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitNegRxExcess | 1.3.6.1.4.1.335.1.4.7.1.17.1.25 | ||
| NAME = ; DESC = The negotiated Rx excess burst to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrAllSVCCircuitTxDiscardCIRPolice | 1.3.6.1.4.1.335.1.4.7.1.17.1.26 | ||
| NAME = ; DESC = The number of packets that have been discarded \ due to policing of the CIR.; HELP =; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrAllSVCCircuitPriority | 1.3.6.1.4.1.335.1.4.7.1.17.1.27 | ||
| NAME = ; DESC = The transfer priority used for connection \ setup of this SVC.; HELP = Valid priorities are 0 (LAN), 6 (NMSNAS) \ and 11 (voice); CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| mcmFrAllSVCCircuitSvcIfIndex | 1.3.6.1.4.1.335.1.4.7.1.17.1.28 | ||
| NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the physical interface \ this SVC DLCI is assoiciated with.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrAllSVCCircuitDiscardPriority | 1.3.6.1.4.1.335.1.4.7.1.17.1.29 | ||
| NAME = ; DESC = The discard priority used in \ setting the SVC circuit.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | low-discard-level(1), medium-discard-level(2), high-discard-level(3) | ||
| mcmFrAllSVCCircuitSetupPriority | 1.3.6.1.4.1.335.1.4.7.1.17.1.30 | ||
| NAME = ; DESC = This object indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrAllSVCCircuitHoldingPriority | 1.3.6.1.4.1.335.1.4.7.1.17.1.31 | ||
| NAME = ; DESC = This object indicates the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrLANSpvcTable | 1.3.6.1.4.1.335.1.4.7.1.18 | ||
| NAME = ; DESC = The Frame Relay LAN SPVC Connections \ table(Operational); HELP = ; CAPABILITIES =NET_CFG, VPN_CFG; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrLANSpvcEntry | |||
| mcmFrLANSpvcEntry | 1.3.6.1.4.1.335.1.4.7.1.18.1 | ||
| NAME = ; DESC = An entry in the Frame Relay LAN SPVC \ Connections table. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrLANSpvcEntry | |||
| mcmFrLANSpvcVirtualPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.18.1.1 | ||
| NAME = ; DESC = The ifIndex of the local Virtual Port \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the FR End-to-End Connections table.) (Operationsl); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrLANSpvcRemoteDLCI | 1.3.6.1.4.1.335.1.4.7.1.18.1.2 | ||
| NAME = ; DESC = The DLCI value on the remote DCE interface. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| mcmFrLANSpvcConnectId | 1.3.6.1.4.1.335.1.4.7.1.18.1.3 | ||
| NAME = ; DESC = The connect ID of this SPVC mapping.\ Used to associate SVCs and Connect \ mappings.(Operational) HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| mcmFrLANSpvcRemoteDNA | 1.3.6.1.4.1.335.1.4.7.1.18.1.4 | ||
| NAME = ; DESC = The DNA of the remote node with which \ the SVC will be established. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..34) | ||
| mcmFrLANSpvcDLCI | 1.3.6.1.4.1.335.1.4.7.1.18.1.5 | ||
| NAME = ; DESC = The DLCI value of the SVC once \ the SVC has been established. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| mcmFrLANSpvcIfIndex | 1.3.6.1.4.1.335.1.4.7.1.18.1.6 | ||
| NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the ifIndex used for the \ SVC connection. (Operational) HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrLANSpvcVPState | 1.3.6.1.4.1.335.1.4.7.1.18.1.7 | ||
| NAME = ; DESC = The value of this object indicates \ whether the local Virtual Port with \ this mapping is active or inactive. \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2) | ||
| mcmFrLANSpvcSVCState | 1.3.6.1.4.1.335.1.4.7.1.18.1.8 | ||
| NAME = ; DESC = The value of this object indicates \ whether the local DCE considers the \ SVC associated with this mapping \ active or inactive.(Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), inactive(2) | ||
| mcmFrLANSpvcConnType | 1.3.6.1.4.1.335.1.4.7.1.18.1.9 | ||
| NAME = ; DESC = The value of this object indicates \ whether this end of the SPVC segment \ initiated the SVC call.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | slave(1), master(2) | ||
| mcmFrLANSpvcLastChange | 1.3.6.1.4.1.335.1.4.7.1.18.1.10 | ||
| NAME = ; DESC = The value of MIB II's sysUpTime at \ the time this SVC mapping entered \ its current operations state the \ high to low direction; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| TimeTicks | |||
| mcmFrLANSpvcDisconnectReason | 1.3.6.1.4.1.335.1.4.7.1.18.1.11 | ||
| NAME = ; DESC = The value of this object indicates \ the reason why the SPVC is not \ active. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | local-VP-is-down(1), local-SVC-LMI-is-Down(2), remote-PVC-LMI-is-down(3), the-SVC-connection-is-down(4) | ||
| mcmFrLANSpvcSVCTable | 1.3.6.1.4.1.335.1.4.7.1.19 | ||
| NAME = ; DESC = The Frame Relay SVC Connect (Switched) \ Segment Configuration table. HELP = ; CAPABILITIES =NET_CFG, VPN_CFG; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrLANSpvcSVCEntry | |||
| mcmFrLANSpvcSVCEntry | 1.3.6.1.4.1.335.1.4.7.1.19.1 | ||
| NAME = ; DESC = An entry in the Frame Relay LAN SPVC \ Connections table.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrLANSpvcSVCEntry | |||
| mcmFrLANSpvcSVCConnectId | 1.3.6.1.4.1.335.1.4.7.1.19.1.1 | ||
| NAME = ; DESC = The Connect Id of the Connection \ group entry to which this SVC \ belongs. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| mcmFrLANSpvcSVCIfIndex | 1.3.6.1.4.1.335.1.4.7.1.19.1.2 | ||
| NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the ifIndex of the local \ frame relay physical line interface. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrLANSpvcSVCDNA | 1.3.6.1.4.1.335.1.4.7.1.19.1.3 | ||
| NAME = ; DESC = The DNA for the destination of \ the virtual circuit.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..34) | ||
| mcmFrLANSpvcSVCDLCI | 1.3.6.1.4.1.335.1.4.7.1.19.1.4 | ||
| NAME = ; DESC = The local DLCI for this SVC. \ Valid only when the SVC is \ established. ; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| mcmFrLANSpvcSVCMaxTxSize | 1.3.6.1.4.1.335.1.4.7.1.19.1.5 | ||
| NAME = ; DESC = The maximum transmission frame size. \ This should be equal to (or greater \ than) the Rx size for the corresponding \ PVC. Expressed in bytes.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| mcmFrLANSpvcSVCMaxRxSize | 1.3.6.1.4.1.335.1.4.7.1.19.1.6 | ||
| NAME = ; DESC = The maximum receivable frame size. \ This should be equal to (or less than) \ the Tx size for the corresponding PVC. \ Expressed in bytes.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| mcmFrLANSpvcSVCMinTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.19.1.7 | ||
| NAME = ; DESC = The minimum transmission throughput. \ This should be equal to (or greater than) \ the Rx CIR for the corresponding PVC. \ Expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrLANSpvcSVCMinRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.19.1.8 | ||
| NAME = ; DESC = The minimum receive throughput.\ This should be equal to (or less \ than) the Tx CIR for the corresponding \ PVC. Expressed in bits/sec. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrLANSpvcSVCMaxTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.19.1.9 | ||
| NAME = ; DESC = The maximum transmission throughput.\ Always set to the value of \ mcmFrLANSpvcSVCMinTxThroughput.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrLANSpvcSVCMaxRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.19.1.10 | ||
| NAME = ; DESC = The maximum receive throughput. \ Always set to the value of \ mcmFrLANSpvcSVCMinRxThroughput.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrLANSpvcSVCMaxTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.19.1.11 | ||
| NAME = ; DESC = The maximum transmission burst size \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrLANSpvcSVCMaxRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.19.1.12 | ||
| NAME = ; DESC = The maximum receive burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrLANSpvcSVCExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.19.1.13 | ||
| NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt \ to accept. This should be equal to \ (or greater than) the Rx Be configured for the corresponding PVC. Expressed in \ bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrLANSpvcSVCExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.19.1.14 | ||
| NAME = ; DESC = The maximum number of uncommitted bits \ that the network will attempt to deliver. \ This should be equal to (or less than) the \ Tx Be configured for the corresponding PVC \ Expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrLANSpvcSVCTransferPriority | 1.3.6.1.4.1.335.1.4.7.1.19.1.15 | ||
| NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| mcmFrLANSpvcSVCReasonForDisconnect | 1.3.6.1.4.1.335.1.4.7.1.19.1.16 | ||
| NAME = ; DESC = The reason for the SVC Disconnect.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | the-PVC-does-not-exist-ie-unassigned(1), no-route-to-specified-transit-network(2), no-route-to-destination(3), channel-unacceptable(6), call-awarded-and-being-delivered-in-an-est-channel(7), normal-call-clearing(16), remote-PVC-already-connected-ie-busy(17), no-user-present-in-call(18), remote-PVC-down-ie-unavailable(21), destination-out-of-order(27), invalid-number-format(28), facility-rejected(29), response-to-status-inquiry(30), normal-unspecified(31), no-DLCI-available(34), network-out-of-order(38), permanent-frame-mode-connection-out-of-service(39), permanent-frame-mode-connection-operational(40), temporary-failure(41), switching-equipment-congestion(42), access-information-discarded(43), specified-DLCI-unavailable(44), resource-unavailable(47), quality-of-service-not-available(49), requested-facility-not-subscribed(50), bearer-capability-not-authorized(57), bearer-capability-not-presently-available(58), service-or-option-not-available-unspecified(63), bearer-capability-not-implemented(65), channel-type-not-implemented(66), only-restricted-digital-capability-is-available(70), service-or-option-not-implemented-unspecified(79), invalid-call-reference(81), identified-channel-does-not-exist(82), user-not-member-of-CUG(87), incompatible-destination(88), non-existent-CUG(90), invalid-transit-network-selection(91), invalid-message-unspecified(95), missing-element(96), message-type-unknown(97), message-not-compatible(98), element-non-existent-or-not-implemented(99), invalid-element(100), invalid-message-for-state(101), timer-recovery(102), protocol-error-unspecified(111), interworking-unspecified(127), normal-condition(128) | ||
| mcmFrLANSpvcSVCDiscardPriority | 1.3.6.1.4.1.335.1.4.7.1.19.1.17 | ||
| NAME = ; DESC = The discard priority setup for \ the LAN SPVC SVC.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | low-discard-level(1), medium-discard-level(2), high-discard-level(3) | ||
| mcmFrLANSpvcSVCSetupPriority | 1.3.6.1.4.1.335.1.4.7.1.19.1.18 | ||
| NAME = ; DESC = This object indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrLANSpvcSVCHoldingPriority | 1.3.6.1.4.1.335.1.4.7.1.19.1.19 | ||
| NAME = ; DESC = This object indicates the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| nvmFrLANSpvcTable | 1.3.6.1.4.1.335.1.4.7.1.20 | ||
| NAME = ; DESC = The Frame Relay LAN SPVC Connections \ table(Configurational); HELP = ; CAPABILITIES =NET_CFG, VPN_CFG; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrLANSpvcEntry | |||
| nvmFrLANSpvcEntry | 1.3.6.1.4.1.335.1.4.7.1.20.1 | ||
| NAME = ; DESC = An entry in the Frame Relay LAN SPVC \ Connections table. (Configurational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrLANSpvcEntry | |||
| nvmFrLANSpvcVirtualPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.20.1.1 | ||
| NAME = ; DESC = The ifIndex of the local Virtual Port \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the FR End-to-End Connections table.); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrLANSpvcRemoteDLCI | 1.3.6.1.4.1.335.1.4.7.1.20.1.2 | ||
| NAME = ; DESC = The DLCI value on the remote DCE interface. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| nvmFrLANSpvcConnectId | 1.3.6.1.4.1.335.1.4.7.1.20.1.3 | ||
| NAME = ; DESC = The connect ID of this SPVC mapping.\ Used to associate SVCs and Connect \ mappings.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..65535 | ||
| nvmFrLANSpvcRemoteDNA | 1.3.6.1.4.1.335.1.4.7.1.20.1.4 | ||
| NAME = ; DESC = The DNA of the remote node with which \ the SVC will be established.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..34) | ||
| nvmFrLANSpvcConnType | 1.3.6.1.4.1.335.1.4.7.1.20.1.5 | ||
| NAME = ; DESC = The value of this object indicates \ whether this end of the SPVC segment \ initiated the SVC call.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | slave(1), master(2) | ||
| nvmFrLANSpvcRowStatus | 1.3.6.1.4.1.335.1.4.7.1.20.1.6 | ||
| NAME = ; DESC = This object is used to add new rows \ in the connection table, modify \ existing rows and to delete existing \ rows.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | active(1), createAndGo(4), destroy(6) | ||
| nvmFrLANSpvcSVCTable | 1.3.6.1.4.1.335.1.4.7.1.21 | ||
| NAME = ; DESC = The Frame Relay SVC Connect (Switched) \ Segment Configuration table. HELP = ; CAPABILITIES =NET_CFG, VPN_CFG; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrLANSpvcSVCEntry | |||
| nvmFrLANSpvcSVCEntry | 1.3.6.1.4.1.335.1.4.7.1.21.1 | ||
| NAME = ; DESC = An entry in the Frame Relay LAN SPVC \ Connections table.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrLANSpvcSVCEntry | |||
| nvmFrLANSpvcSVCConnectId | 1.3.6.1.4.1.335.1.4.7.1.21.1.1 | ||
| NAME = ; DESC = The Connect Id of the Connection \ group entry to which this SVC \ belongs. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..65535 | ||
| nvmFrLANSpvcSVCDNA | 1.3.6.1.4.1.335.1.4.7.1.21.1.2 | ||
| NAME = ; DESC = The DNA for the destination of \ the virtual circuit.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| DisplayString | SIZE(1..34) | ||
| nvmFrLANSpvcSVCMaxTxSize | 1.3.6.1.4.1.335.1.4.7.1.21.1.3 | ||
| NAME = ; DESC = The maximum transmission frame size. \ This should be equal to (or greater \ than) the Rx size for the corresponding \ PVC. Expressed in bytes.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| nvmFrLANSpvcSVCMaxRxSize | 1.3.6.1.4.1.335.1.4.7.1.21.1.4 | ||
| NAME = ; DESC = The maximum receivable frame size. \ This should be equal to (or less than) \ the Tx size for the corresponding PVC. \ Expressed in bytes.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..4096 | ||
| nvmFrLANSpvcSVCMinTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.21.1.5 | ||
| NAME = ; DESC = The minimum transmission throughput. \ This should be equal to (or greater than) \ the Rx CIR for the corresponding PVC. \ Expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrLANSpvcSVCMinRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.21.1.6 | ||
| NAME = ; DESC = The minimum receive throughput.\ This should be equal to (or less \ than) the Tx CIR for the corresponding \ PVC. Expressed in bits/sec. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrLANSpvcSVCMaxTxThroughput | 1.3.6.1.4.1.335.1.4.7.1.21.1.7 | ||
| NAME = ; DESC = The maximum transmission throughput.\ Always set to the value of \ nvmFrLANSpvcSVCMinTxThroughput.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrLANSpvcSVCMaxRxThroughput | 1.3.6.1.4.1.335.1.4.7.1.21.1.8 | ||
| NAME = ; DESC = The maximum receive throughput. \ Always set to the value of \ nvmFrLANSpvcSVCMinRxThroughput.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrLANSpvcSVCMaxTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.21.1.9 | ||
| NAME = ; DESC = The maximum transmission burst size \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrLANSpvcSVCMaxRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.21.1.10 | ||
| NAME = ; DESC = The maximum receive burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrLANSpvcSVCExcessTxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.21.1.11 | ||
| NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt \ to accept. This should be equal to \ (or greater than) the Rx Be configured for the corresponding PVC. Expressed in \ bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrLANSpvcSVCExcessRxBurstSize | 1.3.6.1.4.1.335.1.4.7.1.21.1.12 | ||
| NAME = ; DESC = The maximum number of uncommitted bits \ that the network will attempt to deliver. \ This should be equal to (or less than) the \ Tx Be configured for the corresponding PVC \ Expressed in bits/sec.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrLANSpvcSVCTransferPriority | 1.3.6.1.4.1.335.1.4.7.1.21.1.13 | ||
| NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..15 | ||
| nvmFrLANSpvcSVCDiscardPriority | 1.3.6.1.4.1.335.1.4.7.1.21.1.14 | ||
| NAME = ; DESC = The discard priority setup for \ the LAN SPVC SVC.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | low-discard-level(1), medium-discard-level(2), high-discard-level(3) | ||
| nvmFrLANSpvcSVCSetupPriority | 1.3.6.1.4.1.335.1.4.7.1.21.1.15 | ||
| NAME = ; DESC = This object specifies the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| nvmFrLANSpvcSVCHoldingPriority | 1.3.6.1.4.1.335.1.4.7.1.21.1.16 | ||
| NAME = ; DESC = This object specifies the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrDlcmiSVCStatusTable | 1.3.6.1.4.1.335.1.4.7.1.22 | ||
| NAME = ; DESC = Table of entries for Frame Relay Dlcmi SVC \ status for this access device. (Operational); HELP =; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrDlcmiSVCStatusEntry | |||
| mcmFrDlcmiSVCStatusEntry | 1.3.6.1.4.1.335.1.4.7.1.22.1 | ||
| NAME = ; DESC = A row or entry in the Frame Relay Dlcmi SVC \ status Table. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrDlcmiSVCStatusEntry | |||
| mcmFrDlcmiSVCStatusIfIndex | 1.3.6.1.4.1.335.1.4.7.1.22.1.1 | ||
| NAME = ; DESC = The ifIndex Value associated with the \ netlink. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrDlcmiSVCStatusDlci | 1.3.6.1.4.1.335.1.4.7.1.22.1.2 | ||
| NAME = ; DESC = The SVC DLCI number associated with the \ netlink. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 17..991 | ||
| mcmFrDlcmiSVCStatusCardNumber | 1.3.6.1.4.1.335.1.4.7.1.22.1.3 | ||
| NAME = ; DESC = The card number linked to this \ netlink. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrDlcmiSVCStatusPortNumber | 1.3.6.1.4.1.335.1.4.7.1.22.1.4 | ||
| NAME = ; DESC = The physical port number linked to this \ netlink. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| mcmFrDlcmiSVCStatusTunnelPvcDlci | 1.3.6.1.4.1.335.1.4.7.1.22.1.5 | ||
| NAME = ; DESC = The tunneling PVC DLCI number linked to \ this netlink. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| mcmFrDlcmiSVCStatusPeerCardNumber | 1.3.6.1.4.1.335.1.4.7.1.22.1.6 | ||
| NAME = ; DESC = The card number linked to this netlink \ at the other side of the connection. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..5 | ||
| mcmFrDlcmiSVCStatusPeerPortNumber | 1.3.6.1.4.1.335.1.4.7.1.22.1.7 | ||
| NAME = ; DESC = The physical port number linked to this netlink \ at the other side of the connection. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| mcmFrDlcmiSVCStatusPeerTunPvcDlci | 1.3.6.1.4.1.335.1.4.7.1.22.1.8 | ||
| NAME = ; DESC = The tunneling PVC DLCI number linked to this \ netlink at the other side of the connection. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| mcmFrDlcmiSVCStatusPeerSvcDlci | 1.3.6.1.4.1.335.1.4.7.1.22.1.9 | ||
| NAME = ; DESC = The SVC DLCI number linked to this netlink \ at the other side of the connection. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 17..991 | ||
| mcmFrTunnelPvcTable | 1.3.6.1.4.1.335.1.4.7.1.23 | ||
| NAME = ; DESC = Table of entries for Frame Relay Tunnel PVCs \ for this access device. (Operational); HELP =; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrTunnelPvcEntry | |||
| mcmFrTunnelPvcEntry | 1.3.6.1.4.1.335.1.4.7.1.23.1 | ||
| NAME = ; DESC = A row or entry in the Frame Relay Tunnel PVC \ Table. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrTunnelPvcEntry | |||
| mcmFrTunnelPvcIfIndex | 1.3.6.1.4.1.335.1.4.7.1.23.1.1 | ||
| NAME = ; DESC = The ifIndex of the tunnel PVC itself. \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrTunnelPvcDlciNumber | 1.3.6.1.4.1.335.1.4.7.1.23.1.2 | ||
| NAME = ; DESC = The DLCI number for this PVC tunnel. \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| mcmFrTunnelPvcPhysicalCard | 1.3.6.1.4.1.335.1.4.7.1.23.1.3 | ||
| NAME = ; DESC = The Card (Logical Interface Module - LIM) \ of the WAN port (physical FR link). \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | limA(1), lim1(2), lim2(3), lim3(4), lim4(5) | ||
| mcmFrTunnelPvcPhysicalPort | 1.3.6.1.4.1.335.1.4.7.1.23.1.4 | ||
| NAME = ; DESC = The channel number of this WAN port. \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| mcmFrTunnelPvcType | 1.3.6.1.4.1.335.1.4.7.1.23.1.5 | ||
| NAME = ; DESC = The FR tunnel PVC type. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | dte-panl(1), dce-panl(2), standard(3) | ||
| mcmFrTunnelPvcPhysPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.23.1.6 | ||
| NAME = ; DESC = The ifIndex of the FR physical port. \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrTunnelPvcMaxRxFrameSize | 1.3.6.1.4.1.335.1.4.7.1.23.1.7 | ||
| NAME = ; DESC = The maximum receive frame size in \ octets for this PVC tunnel data (sent into \ this unit). (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4096 | ||
| mcmFrTunnelPvcRxBc | 1.3.6.1.4.1.335.1.4.7.1.23.1.8 | ||
| NAME = ; DESC = The receive committed burst size (Bc) in bits \ for this PVC tunnel data (sent into this unit). \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrTunnelPvcRxBe | 1.3.6.1.4.1.335.1.4.7.1.23.1.9 | ||
| NAME = ; DESC = The receive excess burst size (Be) in bits \ for this PVC tunnel data (sent into this unit). \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrTunnelPvcMaxRxCIR | 1.3.6.1.4.1.335.1.4.7.1.23.1.10 | ||
| NAME = ; DESC = The maximum received throughput in \ bits per second. Used for FECN/BECN \ management. (Operation); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..256000 | ||
| mcmFrTunnelPvcMaxTxFrameSize | 1.3.6.1.4.1.335.1.4.7.1.23.1.11 | ||
| NAME = ; DESC = The maximum transmission frame size in \ octets for this PVC tunnel data (sent out of \ this unit). (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4096 | ||
| mcmFrTunnelPvcTxBc | 1.3.6.1.4.1.335.1.4.7.1.23.1.12 | ||
| NAME = ; DESC = The transmission committed burst size (Bc) in bits \ for this PVC tunnel data (sent out of this unit). \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrTunnelPvcTxBe | 1.3.6.1.4.1.335.1.4.7.1.23.1.13 | ||
| NAME = ; DESC = The transmission excess burst size (Be) in bits \ for this PVC tunnel data (sent out of this unit). \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| mcmFrTunnelPvcMaxTxCIR | 1.3.6.1.4.1.335.1.4.7.1.23.1.14 | ||
| NAME = ; DESC = The maximum transmit throughput in \ bits per second. Used for FECN/BECN \ management. (Operation); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..256000 | ||
| mcmFrTunnelPvcState | 1.3.6.1.4.1.335.1.4.7.1.23.1.15 | ||
| NAME = ; DESC = This object indicates the current state \ of the PVC DLCI. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | invalid(1), active(2), inactive(3) | ||
| mcmFrTunnelPvcRxFrames | 1.3.6.1.4.1.335.1.4.7.1.23.1.16 | ||
| NAME = ; DESC = The number of frames received for this \ PVC tunnel. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTunnelPvcTxFrames | 1.3.6.1.4.1.335.1.4.7.1.23.1.17 | ||
| NAME = ; DESC = The number of frames transmitted in this \ PVC tunnel (regardless whether they are Bc \ or Be frames). (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTunnelPvcRxDeFrames | 1.3.6.1.4.1.335.1.4.7.1.23.1.18 | ||
| NAME = ; DESC = The number of frames received for this \ PVC tunnel (ingress) with the DE bit set \ to one. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTunnelPvcRxExcessFrames | 1.3.6.1.4.1.335.1.4.7.1.23.1.19 | ||
| NAME = ; DESC = The number of frames received for this \ PVC tunnel (ingress) which were treated as \ excess traffic. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTunnelPvcTxExcessFrames | 1.3.6.1.4.1.335.1.4.7.1.23.1.20 | ||
| NAME = ; DESC = The number of frames transmitted in this \ PVC tunnel (egress) which were treated as \ excess traffic. The DE bit may be set to one.\ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTunnelPvcRxDiscards | 1.3.6.1.4.1.335.1.4.7.1.23.1.21 | ||
| NAME = ; DESC = The number of frames received for this \ PVC tunnel (ingress) that were discarded due \ to traffic enforcement. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTunnelPvcRxOctets | 1.3.6.1.4.1.335.1.4.7.1.23.1.22 | ||
| NAME = ; DESC = The number of octets received for this \ PVC tunnel (ingress). (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTunnelPvcTxOctets | 1.3.6.1.4.1.335.1.4.7.1.23.1.23 | ||
| NAME = ; DESC = The number of octets transmitted in this \ PVC tunnel (egress). (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| Counter | |||
| mcmFrTunnelPvcConsecFrames | 1.3.6.1.4.1.335.1.4.7.1.23.1.24 | ||
| NAME = ; DESC = The number of consecutive frames received\ with the BECN bit set before reducing \ the transmit rate. Used for FECN/BECN \ management. (Operation); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| mcmFrTunnelPvcMinTxCIR | 1.3.6.1.4.1.335.1.4.7.1.23.1.25 | ||
| NAME = ; DESC = The minimum transmit throughput in \ bits per second. Used for FECN/BECN \ management. (Operation); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..256000 | ||
| nvmFrTunnelPvcTable | 1.3.6.1.4.1.335.1.4.7.1.24 | ||
| NAME = ; DESC = Table of entries for Frame Relay Tunnel PVCs \ for this access device. (Configuration); HELP =; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrTunnelPvcEntry | |||
| nvmFrTunnelPvcEntry | 1.3.6.1.4.1.335.1.4.7.1.24.1 | ||
| NAME = ; DESC = A row or entry in the Frame Relay Tunnel PVC \ Table. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrTunnelPvcEntry | |||
| nvmFrTunnelPvcIfIndex | 1.3.6.1.4.1.335.1.4.7.1.24.1.1 | ||
| NAME = ; DESC = The ifIndex of the tunnel PVC itself. \ (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrTunnelPvcDlciNumber | 1.3.6.1.4.1.335.1.4.7.1.24.1.2 | ||
| NAME = ; DESC = The DLCI number for this PVC tunnel. \ Note that this object may only be configured \ during row creation. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 16..991 | ||
| nvmFrTunnelPvcPhysicalCard | 1.3.6.1.4.1.335.1.4.7.1.24.1.3 | ||
| NAME = ; DESC = The Card (Logical Interface Module - LIM) \ of the WAN port (physical FR link). \ Note that this object may only be configured \ during row creation. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | limA(1), lim1(2), lim2(3), lim3(4), lim4(5) | ||
| nvmFrTunnelPvcPhysicalPort | 1.3.6.1.4.1.335.1.4.7.1.24.1.4 | ||
| NAME = ; DESC = The channel number of this WAN port. \ Note that this object may only be configured \ during row creation. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..8 | ||
| nvmFrTunnelPvcType | 1.3.6.1.4.1.335.1.4.7.1.24.1.5 | ||
| NAME = ; DESC = The FR tunnel PVC type. \ Note that this object may only be configured \ during row creation. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | dte-panl(1), dce-panl(2), standard(3) | ||
| nvmFrTunnelPvcPhysPortIfIndex | 1.3.6.1.4.1.335.1.4.7.1.24.1.6 | ||
| NAME = ; DESC = The ifIndex of the FR physical port. \ (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrTunnelPvcMaxRxFrameSize | 1.3.6.1.4.1.335.1.4.7.1.24.1.7 | ||
| NAME = ; DESC = The maximum receive frame size in \ octets for this PVC tunnel data (sent into \ this unit). (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4096 | ||
| nvmFrTunnelPvcRxBc | 1.3.6.1.4.1.335.1.4.7.1.24.1.8 | ||
| NAME = ; DESC = The receive committed burst size (Bc) in bits \ for this PVC tunnel data (sent into this unit). \ (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrTunnelPvcRxBe | 1.3.6.1.4.1.335.1.4.7.1.24.1.9 | ||
| NAME = ; DESC = The receive excess burst size (Be) in bits \ for this PVC tunnel data (sent into this unit). \ (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrTunnelPvcMaxRxCIR | 1.3.6.1.4.1.335.1.4.7.1.24.1.10 | ||
| NAME = ; DESC = The maximum received throughput in \ bits per second. Used for FECN/BECN \ management. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..256000 | ||
| nvmFrTunnelPvcMaxTxFrameSize | 1.3.6.1.4.1.335.1.4.7.1.24.1.11 | ||
| NAME = ; DESC = The maximum transmission frame size in \ octets for this PVC tunnel data (sent out of \ this unit). (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..4096 | ||
| nvmFrTunnelPvcTxBc | 1.3.6.1.4.1.335.1.4.7.1.24.1.12 | ||
| NAME = ; DESC = The transmission committed burst size (Bc) in bits \ for this PVC tunnel data (sent out of this unit). \ (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrTunnelPvcTxBe | 1.3.6.1.4.1.335.1.4.7.1.24.1.13 | ||
| NAME = ; DESC = The transmission excess burst size (Be) in bits \ for this PVC tunnel data (sent out of this unit). \ (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..2560000 | ||
| nvmFrTunnelPvcMaxTxCIR | 1.3.6.1.4.1.335.1.4.7.1.24.1.14 | ||
| NAME = ; DESC = The maximum transmit throughput in \ bits per second. Used for FECN/BECN \ management. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..256000 | ||
| nvmFrTunnelPvcRowStatus | 1.3.6.1.4.1.335.1.4.7.1.24.1.15 | ||
| NAME = ; DESC = This object is used to add new rows or delete \ existing rows in this FR Tunneling PVC \ table. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | add(1), delete(2), active(3) | ||
| nvmFrTunnelPvcConsecFrames | 1.3.6.1.4.1.335.1.4.7.1.24.1.16 | ||
| NAME = ; DESC = The number of consecutive frames received\ with the BECN bit set before reducing \ the transmit rate. Used for FECN/BECN \ management. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..100 | ||
| nvmFrTunnelPvcMinTxCIR | 1.3.6.1.4.1.335.1.4.7.1.24.1.17 | ||
| NAME = ; DESC = The minimum transmit throughput in \ bits per second. Used for FECN/BECN \ management. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 0..256000 | ||
| mcmFrNetlinkMapTable | 1.3.6.1.4.1.335.1.4.7.1.25 | ||
| NAME = ; DESC = Table for mapping Netlinks (Tunnel PVC ifIndex \ values) to Virtual Ports. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrNetlinkMapEntry | |||
| mcmFrNetlinkMapEntry | 1.3.6.1.4.1.335.1.4.7.1.25.1 | ||
| NAME = ; DESC = Entry in the table for mapping Netlinks \ (Tunnel PVC ifIndex values) to Virtual \ Ports. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrNetlinkMapEntry | |||
| mcmFrNetlinkMapVPIfIndex | 1.3.6.1.4.1.335.1.4.7.1.25.1.1 | ||
| NAME = ; DESC = Virtual port ifIndex associated \ with this Netlink (Tunnel PVC). \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrNetlinkMapNetlinkIfIndex | 1.3.6.1.4.1.335.1.4.7.1.25.1.2 | ||
| NAME = ; DESC = Netlink (Tunnel PVC) ifIndex associated \ with the specified Virtual Port. \ (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| mcmFrNetlinkMapOperStatus | 1.3.6.1.4.1.335.1.4.7.1.25.1.3 | ||
| NAME = ; DESC = This object is used to indicate the operational \ status of the Tunnel PVC. (Operational); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | up(1), down(2) | ||
| nvmFrNetlinkMapTable | 1.3.6.1.4.1.335.1.4.7.1.26 | ||
| NAME = ; DESC = Table for mapping Netlinks (Tunnel PVC ifIndex \ values) to Virtual Ports. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| NvmFrNetlinkMapEntry | |||
| nvmFrNetlinkMapEntry | 1.3.6.1.4.1.335.1.4.7.1.26.1 | ||
| NAME = ; DESC = Entry in the table for mapping Netlinks \ (Tunnel PVC ifIndex values) to Virtual \ Ports. (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| NvmFrNetlinkMapEntry | |||
| nvmFrNetlinkMapVPIfIndex | 1.3.6.1.4.1.335.1.4.7.1.26.1.1 | ||
| NAME = ; DESC = Virtual port ifIndex associated \ with this Netlink (Tunnel PVC). \ (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrNetlinkMapNetlinkIfIndex | 1.3.6.1.4.1.335.1.4.7.1.26.1.2 | ||
| NAME = ; DESC = Netlink (Tunnel PVC) ifIndex associated \ with the specified Virtual Port. \ (Configuration); HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 1..255 | ||
| nvmFrNetlinkMapRowStatus | 1.3.6.1.4.1.335.1.4.7.1.26.1.3 | ||
| NAME = ; DESC = This object is used to add new rows or delete \ existing rows in this Virtual Port to Netlink \ Mapping table. (Configuration) ; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | add(1), delete(2), active(3) | ||
| fr-control | 1.3.6.1.4.1.335.1.4.7.2 | ||
| OBJECT IDENTIFIER | |||
| mcmFrWanLinkDown | 1.3.6.1.4.1.335.1.4.7.2 | ||
| NAME = ; DESC = FR TRAP message: indication of WAN link \ down.\ Severity Level: CRITICAL.; HELP = Loss of Physical connection, or LMI is dropped.\ Please check the physical connection; the MPANL \ LMI status, and provisioning on Passport. If \ no change, contact Sys Admin., or Field \ Personnel.; | |||
| TRAP-TYPE | |||
| mcmSysAsciiTimeOfDay | |||
| mcmSysIfExtModule | |||
| mcmSysIfExtPPA | |||
| mcmFrPhyPortCntrTable | 1.3.6.1.4.1.335.1.4.7.2.1 | ||
| NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table to reset Frame Relay physical \ port counters; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrPhyPortCntrEntry | |||
| mcmFrPhyPortCntrEntry | 1.3.6.1.4.1.335.1.4.7.2.1.1 | ||
| NAME = ; DESC = Entry in the Frame Relay Physical \ port counters table; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrPhyPortCntrEntry | |||
| mcmFrPhyPortCntrIfIndex | 1.3.6.1.4.1.335.1.4.7.2.1.1.1 | ||
| NAME = ; DESC = The ifIndex of the physical port whose \ counters are to be reset; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPhyPortCntrAction | 1.3.6.1.4.1.335.1.4.7.2.1.1.2 | ||
| NAME = ; DESC = Action to be taken on counters (reset); HELP = When set to reset, the physical port \ counters should be zeroed out for the \ specified ifIndex; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1), other(2) | ||
| mcmFrVirtualPortCntrTable | 1.3.6.1.4.1.335.1.4.7.2.2 | ||
| NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table to reset the Frame Relay \ virtual port counters; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrVirtualPortCntrEntry | |||
| mcmFrVirtualPortCntrEntry | 1.3.6.1.4.1.335.1.4.7.2.2.1 | ||
| NAME = ; DESC = Entry in the virtual port counter \ table; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrVirtualPortCntrEntry | |||
| mcmFrVirtualPortCntrIfIndex | 1.3.6.1.4.1.335.1.4.7.2.2.1.1 | ||
| NAME = ; DESC = The ifIndex of the virtual port whose \ counters are to be reset; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrVirtualPortCntrAction | 1.3.6.1.4.1.335.1.4.7.2.2.1.2 | ||
| NAME = ; DESC = Action to be taken on the counters (reset); HELP = When set to reset, the virtual port \ counters should be zeroed out for the \ specified ifIndex; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1), other(2) | ||
| mcmFrPVCCntrTable | 1.3.6.1.4.1.335.1.4.7.2.3 | ||
| NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table used to reset counters \ associated with the PVC; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrPVCCntrEntry | |||
| mcmFrPVCCntrEntry | 1.3.6.1.4.1.335.1.4.7.2.3.1 | ||
| NAME = ; DESC = Entry in the PVC counter reset \ table; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrPVCCntrEntry | |||
| mcmFrPVCCntrIfIndex | 1.3.6.1.4.1.335.1.4.7.2.3.1.1 | ||
| NAME = ; DESC = Ifindex associated with the pvc.; HELP = The ifIndex of the physical port \ associated with the PVC whose \ counters are to be reset; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrPVCCntrDLCI | 1.3.6.1.4.1.335.1.4.7.2.3.1.2 | ||
| NAME = ; DESC = The DLCI number of the PVC whose \ counters are to be reset; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | 17..126975 | ||
| mcmFrPVCCntrAction | 1.3.6.1.4.1.335.1.4.7.2.3.1.3 | ||
| NAME = ; DESC = Action to be taken on the PVC \ counter (reset); HELP = When set to reset, the PVC Counters \ get reset; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1), other(2) | ||
| mcmFrSVCCntrTable | 1.3.6.1.4.1.335.1.4.7.2.4 | ||
| NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table used to reset counters \ associated with the SVC; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; | |||
| OBJECT-TYPE | |||
| SEQUENCE OF | |||
| McmFrSVCCntrEntry | |||
| mcmFrSVCCntrEntry | 1.3.6.1.4.1.335.1.4.7.2.4.1 | ||
| NAME = ; DESC = Entry int the SVC Counter table; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| McmFrSVCCntrEntry | |||
| mcmFrSVCCntrIfIndex | 1.3.6.1.4.1.335.1.4.7.2.4.1.1 | ||
| NAME = ; DESC = Ifindex associated with the SVC \ for which the counters are to be\ reset; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | |||
| mcmFrSVCCntrDNA | 1.3.6.1.4.1.335.1.4.7.2.4.1.2 | ||
| NAME = ; DESC = The DNA associated with the SVC \ whose counters are to be reset; HELP = ; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| OCTET STRING | SIZE(3..30) | ||
| mcmFrSVCCntrAction | 1.3.6.1.4.1.335.1.4.7.2.4.1.3 | ||
| NAME = ; DESC = Action to take on the SVC \ counters (reset); HELP = When set to reset, the SVC \ counters should be reset; CAPABILITIES = ; | |||
| OBJECT-TYPE | |||
| INTEGER | reset(1), other(2) | ||
| Index | |||
| INTEGER | |||
| McmFrPhyPortEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrPhyPortExtIfIndex | |||
| INTEGER as mcmFrPhyPortFlowControl | |||
| INTEGER as mcmFrPhyPortThroughput | |||
| INTEGER as mcmFrPhyPortDelta | |||
| INTEGER as mcmFrPhyPortConsectiveFrames | |||
| INTEGER as mcmFrPhyPortMtuSize | |||
| TimeTicks as mcmFrPhyPortConnectTime | |||
| Counter as mcmFrPhyPortLMISent | |||
| Counter as mcmFrPhyPortLMIReceived | |||
| Counter as mcmFrPhyPortXIDSent | |||
| Counter as mcmFrPhyPortXIDReceived | |||
| Counter as mcmFrPhyPortCLLMSent | |||
| Counter as mcmFrPhyPortCLLMReceived | |||
| Counter as mcmFrPhyPortHeaderErrors | |||
| Counter as mcmFrPhyPortInvalidDLCI | |||
| Counter as mcmFrPhyPortShortFrames | |||
| Counter as mcmFrPhyPortLongFrames | |||
| Counter as mcmFrPhyPortIgnoredFrames | |||
| Counter as mcmFrPhyPortXIDExpirations | |||
| Counter as mcmFrPhyPortTxExpirations | |||
| INTEGER as mcmFrPhyPortPVCLMIStatus | |||
| INTEGER as mcmFrPhyPortSVCLMIStatus | |||
| Counter as mcmFrPhyPortActivePanlDlciSVCs | |||
| Counter as mcmFrPhyPortRxDataFrames | |||
| Counter as mcmFrPhyPortTxDataFrames | |||
| Counter as mcmFrPhyPortRxActivations | |||
| Counter as mcmFrPhyPortRxDeactivations | |||
| Counter as mcmFrPhyPortRxOkAcks | |||
| Counter as mcmFrPhyPortRxErrAcks | |||
| Counter as mcmFrPhyPortRxUnknowns | |||
| Counter as mcmFrPhyPortRxErrors | |||
| Counter as mcmFrPhyPortRxOctets | |||
| Counter as mcmFrPhyPortTxOctets | |||
| INTEGER as mcmFrPhyPortTxThroughput | |||
| INTEGER as mcmFrPhyPortRxThroughput | |||
| INTEGER as mcmFrPhyPortTxMaxFrameSize | |||
| INTEGER as mcmFrPhyPortRxMaxFrameSize | |||
| INTEGER as mcmFrPhyPortRateEnf | |||
| INTEGER as mcmFrPhyPortTxBc | |||
| INTEGER as mcmFrPhyPortRxBc | |||
| INTEGER as mcmFrPhyPortTxBe | |||
| INTEGER as mcmFrPhyPortRxBe | |||
| Counter as mcmFrPhyPortDataFrames | |||
| McmFrPVCPhyEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrPVCPhyIfIndex | |||
| INTEGER as mcmFrPVCLMIMode | |||
| INTEGER as mcmFrPVCBiDir | |||
| McmFrSVCPhyEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrSVCPhyIfIndex | |||
| INTEGER as mcmFrSVCState | |||
| INTEGER as mcmFrSVCT303 | |||
| INTEGER as mcmFrSVCT305 | |||
| INTEGER as mcmFrSVCT308 | |||
| INTEGER as mcmFrSVCT310 | |||
| INTEGER as mcmFrSVCMaxCalls | |||
| INTEGER as mcmFrSVCMaxTxSize | |||
| INTEGER as mcmFrSVCMaxRxSize | |||
| INTEGER as mcmFrSVCMinDLCI | |||
| INTEGER as mcmFrSVCMaxDLCI | |||
| INTEGER as mcmFrSVCMinTxThroughput | |||
| INTEGER as mcmFrSVCMinRxThroughput | |||
| INTEGER as mcmFrSVCMaxTxThroughput | |||
| INTEGER as mcmFrSVCMaxRxThroughput | |||
| INTEGER as mcmFrSVCTxBurstSize | |||
| INTEGER as mcmFrSVCRxBurstSize | |||
| INTEGER as mcmFrSVCExcessTxBurstSize | |||
| INTEGER as mcmFrSVCExcessRxBurstSize | |||
| McmFrVirtualPortEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrVirtualPortIfIndex | |||
| INTEGER as mcmFrVirtualPortPhyPortIfIndex | |||
| INTEGER as mcmFrVirtualPortPPA | |||
| INTEGER as mcmFrVirtualPortMode | |||
| INTEGER as mcmFrVirtualPortState | |||
| INTEGER as mcmFrVirtualPortEntryStatus | |||
| INTEGER as mcmFrVirtualPortProtocolBinding | |||
| INTEGER as mcmFrVirtualPortNumber | |||
| McmFrSVCMapEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrSVCMapVirtualPortIfIndex | |||
| OCTET STRING as mcmFrSVCMapDNA | |||
| INTEGER as mcmFrSVCMapDLCI | |||
| INTEGER as mcmFrSVCMapMaxTxSize | |||
| INTEGER as mcmFrSVCMapMaxRxSize | |||
| INTEGER as mcmFrSVCMapMinTxThroughput | |||
| INTEGER as mcmFrSVCMapMinRxThroughput | |||
| INTEGER as mcmFrSVCMapMaxTxThroughput | |||
| INTEGER as mcmFrSVCMapMaxRxThroughput | |||
| INTEGER as mcmFrSVCMapTxBurstSize | |||
| INTEGER as mcmFrSVCMapRxBurstSize | |||
| INTEGER as mcmFrSVCMapExcessTxBurstSize | |||
| INTEGER as mcmFrSVCMapExcessRxBurstSize | |||
| INTEGER as mcmFrSVCMapPriority | |||
| INTEGER as mcmFrSVCMapEntryStatus | |||
| INTEGER as mcmFrSVCMapTransferPriority | |||
| INTEGER as mcmFrSVCMapDisableCause | |||
| INTEGER as mcmFrSvcMapSvcIfIndex | |||
| INTEGER as mcmFrSVCMapDiscardPriority | |||
| INTEGER as mcmFrSVCMapSetupPriority | |||
| INTEGER as mcmFrSVCMapHoldingPriority | |||
| McmFrPVCMapEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrPVCMapVirtualPortIfIndex | |||
| INTEGER as mcmFrPVCMapDLCI | |||
| INTEGER as mcmFrPVCMapState | |||
| INTEGER as mcmFrPVCMapEntryStatus | |||
| INTEGER as mcmFrPVCMapPhysIfIndex | |||
| McmFrCircuitEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrSVCCircuitIfIndex | |||
| OCTET STRING as mcmFrSVCCircuitDNA | |||
| INTEGER as mcmFrSVCCircuitDlci | |||
| INTEGER as mcmFrSVCCircuitState | |||
| Counter as mcmFrSVCCircuitReceivedFECNs | |||
| Counter as mcmFrSVCCircuitReceivedBECNs | |||
| Counter as mcmFrSVCCircuitSentFrames | |||
| Counter as mcmFrSVCCircuitSentOctets | |||
| Counter as mcmFrSVCCircuitReceivedFrames | |||
| Counter as mcmFrSVCCircuitReceivedOctets | |||
| TimeTicks as mcmFrSVCCircuitCreationTime | |||
| OCTET STRING as mcmFrSVCCircuitCallOriginator | |||
| TimeTicks as mcmFrSVCCircuitLastTimeChange | |||
| INTEGER as mcmFrSVCCircuitCommittedBurst | |||
| INTEGER as mcmFrSVCCircuitExcessBurst | |||
| INTEGER as mcmFrSVCCircuitThroughput | |||
| INTEGER as mcmFrSVCCircuitNegMaxTxSize | |||
| INTEGER as mcmFrSVCCircuitNegMaxRxSize | |||
| INTEGER as mcmFrSVCCircuitNegTxThroughput | |||
| INTEGER as mcmFrSVCCircuitNegRxThroughput | |||
| INTEGER as mcmFrSVCCircuitNegTxBurst | |||
| INTEGER as mcmFrSVCCircuitNegRxBurst | |||
| INTEGER as mcmFrSVCCircuitNegTxExcess | |||
| INTEGER as mcmFrSVCCircuitNegRxExcess | |||
| Counter as mcmFrSVCCircuitTxDiscardCIRPolice | |||
| INTEGER as mcmFrSVCCircuitPriority | |||
| INTEGER as mcmFrSVCCircuitSvcIfIndex | |||
| INTEGER as mcmFrSVCCircuitDiscardPriority | |||
| INTEGER as mcmFrSVCCircuitSetupPriority | |||
| INTEGER as mcmFrSVCCircuitHoldingPriority | |||
| McmFrAllCircuitEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrAllSVCCircuitIfIndex | |||
| INTEGER as mcmFrAllSVCCircuitDlci | |||
| INTEGER as mcmFrAllSVCCircuitType | |||
| OCTET STRING as mcmFrAllSVCCircuitDNA | |||
| INTEGER as mcmFrAllSVCCircuitState | |||
| Counter as mcmFrAllSVCCircuitReceivedFECNs | |||
| Counter as mcmFrAllSVCCircuitReceivedBECNs | |||
| Counter as mcmFrAllSVCCircuitSentFrames | |||
| Counter as mcmFrAllSVCCircuitSentOctets | |||
| Counter as mcmFrAllSVCCircuitReceivedFrames | |||
| Counter as mcmFrAllSVCCircuitReceivedOctets | |||
| TimeTicks as mcmFrAllSVCCircuitCreationTime | |||
| OCTET STRING as mcmFrAllSVCCircuitCallOriginator | |||
| TimeTicks as mcmFrAllSVCCircuitLastTimeChange | |||
| INTEGER as mcmFrAllSVCCircuitCommittedBurst | |||
| INTEGER as mcmFrAllSVCCircuitExcessBurst | |||
| INTEGER as mcmFrAllSVCCircuitThroughput | |||
| INTEGER as mcmFrAllSVCCircuitNegMaxTxSize | |||
| INTEGER as mcmFrAllSVCCircuitNegMaxRxSize | |||
| INTEGER as mcmFrAllSVCCircuitNegTxThroughput | |||
| INTEGER as mcmFrAllSVCCircuitNegRxThroughput | |||
| INTEGER as mcmFrAllSVCCircuitNegTxBurst | |||
| INTEGER as mcmFrAllSVCCircuitNegRxBurst | |||
| INTEGER as mcmFrAllSVCCircuitNegTxExcess | |||
| INTEGER as mcmFrAllSVCCircuitNegRxExcess | |||
| Counter as mcmFrAllSVCCircuitTxDiscardCIRPolice | |||
| INTEGER as mcmFrAllSVCCircuitPriority | |||
| INTEGER as mcmFrAllSVCCircuitSvcIfIndex | |||
| INTEGER as mcmFrAllSVCCircuitDiscardPriority | |||
| INTEGER as mcmFrAllSVCCircuitSetupPriority | |||
| INTEGER as mcmFrAllSVCCircuitHoldingPriority | |||
| McmFrLANSpvcEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrLANSpvcVirtualPortIfIndex | |||
| INTEGER as mcmFrLANSpvcRemoteDLCI | |||
| INTEGER as mcmFrLANSpvcConnectId | |||
| DisplayString as mcmFrLANSpvcRemoteDNA | |||
| INTEGER as mcmFrLANSpvcDLCI | |||
| INTEGER as mcmFrLANSpvcIfIndex | |||
| INTEGER as mcmFrLANSpvcVPState | |||
| INTEGER as mcmFrLANSpvcSVCState | |||
| INTEGER as mcmFrLANSpvcConnType | |||
| TimeTicks as mcmFrLANSpvcLastChange | |||
| INTEGER as mcmFrLANSpvcDisconnectReason | |||
| McmFrLANSpvcSVCEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrLANSpvcSVCConnectId | |||
| INTEGER as mcmFrLANSpvcSVCIfIndex | |||
| DisplayString as mcmFrLANSpvcSVCDNA | |||
| INTEGER as mcmFrLANSpvcSVCDLCI | |||
| INTEGER as mcmFrLANSpvcSVCMaxTxSize | |||
| INTEGER as mcmFrLANSpvcSVCMaxRxSize | |||
| INTEGER as mcmFrLANSpvcSVCMinTxThroughput | |||
| INTEGER as mcmFrLANSpvcSVCMinRxThroughput | |||
| INTEGER as mcmFrLANSpvcSVCMaxTxThroughput | |||
| INTEGER as mcmFrLANSpvcSVCMaxRxThroughput | |||
| INTEGER as mcmFrLANSpvcSVCMaxTxBurstSize | |||
| INTEGER as mcmFrLANSpvcSVCMaxRxBurstSize | |||
| INTEGER as mcmFrLANSpvcSVCExcessTxBurstSize | |||
| INTEGER as mcmFrLANSpvcSVCExcessRxBurstSize | |||
| INTEGER as mcmFrLANSpvcSVCTransferPriority | |||
| INTEGER as mcmFrLANSpvcSVCReasonForDisconnect | |||
| INTEGER as mcmFrLANSpvcSVCDiscardPriority | |||
| INTEGER as mcmFrLANSpvcSVCSetupPriority | |||
| INTEGER as mcmFrLANSpvcSVCHoldingPriority | |||
| McmFrDlcmiSVCStatusEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrDlcmiSVCStatusIfIndex | |||
| INTEGER as mcmFrDlcmiSVCStatusDlci | |||
| INTEGER as mcmFrDlcmiSVCStatusCardNumber | |||
| INTEGER as mcmFrDlcmiSVCStatusPortNumber | |||
| INTEGER as mcmFrDlcmiSVCStatusTunnelPvcDlci | |||
| INTEGER as mcmFrDlcmiSVCStatusPeerCardNumber | |||
| INTEGER as mcmFrDlcmiSVCStatusPeerPortNumber | |||
| INTEGER as mcmFrDlcmiSVCStatusPeerTunPvcDlci | |||
| INTEGER as mcmFrDlcmiSVCStatusPeerSvcDlci | |||
| McmFrTunnelPvcEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrTunnelPvcIfIndex | |||
| INTEGER as mcmFrTunnelPvcDlciNumber | |||
| INTEGER as mcmFrTunnelPvcPhysicalCard | |||
| INTEGER as mcmFrTunnelPvcPhysicalPort | |||
| INTEGER as mcmFrTunnelPvcType | |||
| INTEGER as mcmFrTunnelPvcPhysPortIfIndex | |||
| INTEGER as mcmFrTunnelPvcMaxRxFrameSize | |||
| INTEGER as mcmFrTunnelPvcRxBc | |||
| INTEGER as mcmFrTunnelPvcRxBe | |||
| INTEGER as mcmFrTunnelPvcMaxRxCIR | |||
| INTEGER as mcmFrTunnelPvcMaxTxFrameSize | |||
| INTEGER as mcmFrTunnelPvcTxBc | |||
| INTEGER as mcmFrTunnelPvcTxBe | |||
| INTEGER as mcmFrTunnelPvcMaxTxCIR | |||
| INTEGER as mcmFrTunnelPvcState | |||
| Counter as mcmFrTunnelPvcRxFrames | |||
| Counter as mcmFrTunnelPvcTxFrames | |||
| Counter as mcmFrTunnelPvcRxDeFrames | |||
| Counter as mcmFrTunnelPvcRxExcessFrames | |||
| Counter as mcmFrTunnelPvcTxExcessFrames | |||
| Counter as mcmFrTunnelPvcRxDiscards | |||
| Counter as mcmFrTunnelPvcRxOctets | |||
| Counter as mcmFrTunnelPvcTxOctets | |||
| INTEGER as mcmFrTunnelPvcConsecFrames | |||
| INTEGER as mcmFrTunnelPvcMinTxCIR | |||
| McmFrNetlinkMapEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrNetlinkMapVPIfIndex | |||
| INTEGER as mcmFrNetlinkMapNetlinkIfIndex | |||
| INTEGER as mcmFrNetlinkMapOperStatus | |||
| NvmFrPhyPortEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrPhyPortExtIfIndex | |||
| INTEGER as nvmFrPhyPortFlowControl | |||
| INTEGER as nvmFrPhyPortThroughput | |||
| INTEGER as nvmFrPhyPortDelta | |||
| INTEGER as nvmFrPhyPortConsectiveFrames | |||
| INTEGER as nvmFrPhyPortMtuSize | |||
| INTEGER as nvmFrPhyPortTxThroughput | |||
| INTEGER as nvmFrPhyPortRxThroughput | |||
| INTEGER as nvmFrPhyPortTxMaxFrameSize | |||
| INTEGER as nvmFrPhyPortRxMaxFrameSize | |||
| INTEGER as nvmFrPhyPortRateEnf | |||
| INTEGER as nvmFrPhyPortTxBc | |||
| INTEGER as nvmFrPhyPortRxBc | |||
| INTEGER as nvmFrPhyPortTxBe | |||
| INTEGER as nvmFrPhyPortRxBe | |||
| NvmFrPVCPhyEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrPVCPhyIfIndex | |||
| INTEGER as nvmFrPVCLMIMode | |||
| INTEGER as nvmFrPVCBiDir | |||
| NvmFrSVCPhyEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrSVCPhyIfIndex | |||
| INTEGER as nvmFrSVCState | |||
| INTEGER as nvmFrSVCT303 | |||
| INTEGER as nvmFrSVCT305 | |||
| INTEGER as nvmFrSVCT308 | |||
| INTEGER as nvmFrSVCT310 | |||
| INTEGER as nvmFrSVCMaxCalls | |||
| INTEGER as nvmFrSVCMaxTxSize | |||
| INTEGER as nvmFrSVCMaxRxSize | |||
| INTEGER as nvmFrSVCMinDLCI | |||
| INTEGER as nvmFrSVCMaxDLCI | |||
| INTEGER as nvmFrSVCMinTxThroughput | |||
| INTEGER as nvmFrSVCMinRxThroughput | |||
| INTEGER as nvmFrSVCMaxTxThroughput | |||
| INTEGER as nvmFrSVCMaxRxThroughput | |||
| INTEGER as nvmFrSVCTxBurstSize | |||
| INTEGER as nvmFrSVCRxBurstSize | |||
| INTEGER as nvmFrSVCExcessTxBurstSize | |||
| INTEGER as nvmFrSVCExcessRxBurstSize | |||
| NvmFrVirtualPortEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrVirtualPortIfIndex | |||
| INTEGER as nvmFrVirtualPortPhyPortIfIndex | |||
| INTEGER as nvmFrVirtualPortPPA | |||
| INTEGER as nvmFrVirtualPortMode | |||
| INTEGER as nvmFrVirtualPortEntryStatus | |||
| INTEGER as nvmFrVirtualPortProtocolBinding | |||
| INTEGER as nvmFrVirtualPortNumber | |||
| NvmFrSVCMapEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrSVCMapVirtualPortIfIndex | |||
| OCTET STRING as nvmFrSVCMapDNA | |||
| INTEGER as nvmFrSVCMapMaxTxSize | |||
| INTEGER as nvmFrSVCMapMaxRxSize | |||
| INTEGER as nvmFrSVCMapMinTxThroughput | |||
| INTEGER as nvmFrSVCMapMinRxThroughput | |||
| INTEGER as nvmFrSVCMapMaxTxThroughput | |||
| INTEGER as nvmFrSVCMapMaxRxThroughput | |||
| INTEGER as nvmFrSVCMapTxBurstSize | |||
| INTEGER as nvmFrSVCMapRxBurstSize | |||
| INTEGER as nvmFrSVCMapExcessTxBurstSize | |||
| INTEGER as nvmFrSVCMapExcessRxBurstSize | |||
| INTEGER as nvmFrSVCMapPriority | |||
| INTEGER as nvmFrSVCMapEntryStatus | |||
| INTEGER as nvmFrSVCMapTransferPriority | |||
| INTEGER as nvmFrSVCMapRowStatus | |||
| INTEGER as nvmFrSVCMapDiscardPriority | |||
| INTEGER as nvmFrSVCMapSetupPriority | |||
| INTEGER as nvmFrSVCMapHoldingPriority | |||
| NvmFrPVCMapEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrPVCMapVirtualPortIfIndex | |||
| INTEGER as nvmFrPVCMapDLCI | |||
| INTEGER as nvmFrPVCMapEntryStatus | |||
| INTEGER as nvmFrPVCMapPhysIfIndex | |||
| NvmFrDlcmiEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrDlcmiIfIndex | |||
| INTEGER as nvmFrDlcmiState | |||
| INTEGER as nvmFrDlcmiAddress | |||
| INTEGER as nvmFrDlcmiAddressLen | |||
| INTEGER as nvmFrDlcmiPollingInterval | |||
| INTEGER as nvmFrDlcmiFullEnquiryInterval | |||
| INTEGER as nvmFrDlcmiErrorThreshold | |||
| INTEGER as nvmFrDlcmiMonitoredEvents | |||
| INTEGER as nvmFrDlcmiMaxSupportedVCs | |||
| INTEGER as nvmFrDlcmiMulticast | |||
| NvmFrLANSpvcEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrLANSpvcVirtualPortIfIndex | |||
| INTEGER as nvmFrLANSpvcRemoteDLCI | |||
| INTEGER as nvmFrLANSpvcConnectId | |||
| DisplayString as nvmFrLANSpvcRemoteDNA | |||
| INTEGER as nvmFrLANSpvcConnType | |||
| INTEGER as nvmFrLANSpvcRowStatus | |||
| NvmFrLANSpvcSVCEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrLANSpvcSVCConnectId | |||
| DisplayString as nvmFrLANSpvcSVCDNA | |||
| INTEGER as nvmFrLANSpvcSVCMaxTxSize | |||
| INTEGER as nvmFrLANSpvcSVCMaxRxSize | |||
| INTEGER as nvmFrLANSpvcSVCMinTxThroughput | |||
| INTEGER as nvmFrLANSpvcSVCMinRxThroughput | |||
| INTEGER as nvmFrLANSpvcSVCMaxTxThroughput | |||
| INTEGER as nvmFrLANSpvcSVCMaxRxThroughput | |||
| INTEGER as nvmFrLANSpvcSVCMaxTxBurstSize | |||
| INTEGER as nvmFrLANSpvcSVCMaxRxBurstSize | |||
| INTEGER as nvmFrLANSpvcSVCExcessTxBurstSize | |||
| INTEGER as nvmFrLANSpvcSVCExcessRxBurstSize | |||
| INTEGER as nvmFrLANSpvcSVCTransferPriority | |||
| INTEGER as nvmFrLANSpvcSVCDiscardPriority | |||
| INTEGER as nvmFrLANSpvcSVCSetupPriority | |||
| INTEGER as nvmFrLANSpvcSVCHoldingPriority | |||
| NvmFrTunnelPvcEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrTunnelPvcIfIndex | |||
| INTEGER as nvmFrTunnelPvcDlciNumber | |||
| INTEGER as nvmFrTunnelPvcPhysicalCard | |||
| INTEGER as nvmFrTunnelPvcPhysicalPort | |||
| INTEGER as nvmFrTunnelPvcType | |||
| INTEGER as nvmFrTunnelPvcPhysPortIfIndex | |||
| INTEGER as nvmFrTunnelPvcMaxRxFrameSize | |||
| INTEGER as nvmFrTunnelPvcRxBc | |||
| INTEGER as nvmFrTunnelPvcRxBe | |||
| INTEGER as nvmFrTunnelPvcMaxRxCIR | |||
| INTEGER as nvmFrTunnelPvcMaxTxFrameSize | |||
| INTEGER as nvmFrTunnelPvcTxBc | |||
| INTEGER as nvmFrTunnelPvcTxBe | |||
| INTEGER as nvmFrTunnelPvcMaxTxCIR | |||
| INTEGER as nvmFrTunnelPvcRowStatus | |||
| INTEGER as nvmFrTunnelPvcConsecFrames | |||
| INTEGER as nvmFrTunnelPvcMinTxCIR | |||
| NvmFrNetlinkMapEntry | |||
| SEQUENCE | |||
| INTEGER as nvmFrNetlinkMapVPIfIndex | |||
| INTEGER as nvmFrNetlinkMapNetlinkIfIndex | |||
| INTEGER as nvmFrNetlinkMapRowStatus | |||
| McmFrPhyPortCntrEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrPhyPortCntrIfIndex | |||
| INTEGER as mcmFrPhyPortCntrAction | |||
| McmFrVirtualPortCntrEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrVirtualPortCntrIfIndex | |||
| INTEGER as mcmFrVirtualPortCntrAction | |||
| McmFrPVCCntrEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrPVCCntrIfIndex | |||
| INTEGER as mcmFrPVCCntrDLCI | |||
| INTEGER as mcmFrPVCCntrAction | |||
| McmFrSVCCntrEntry | |||
| SEQUENCE | |||
| INTEGER as mcmFrSVCCntrIfIndex | |||
| OCTET STRING as mcmFrSVCCntrDNA | |||
| INTEGER as mcmFrSVCCntrAction | |||