MICOM-NODE-MIB

File: MICOM-NODE-MIB.mib (375482 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
RFC1065-SMI SNMPv2-TC

Imported symbols

Counter Gauge IpAddress
enterprises OBJECT-TYPE TRAP-TYPE
IpAddress DisplayString

Defined Objects

micom 1.3.6.1.4.1.335
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.335.1
OBJECT IDENTIFIER    

mcmEventConnect 1.3.6.1.4.1.335.1
A connection has been established between the specified pair of unit ports.
TRAP-TYPE    
  trapFirstNodeName  
  trapFirstCardNumberOrInternalFacilityIndication  
  trapFirstChannelNumberOrInternalFacility  
  trapSecondNodeName  
  trapSecondCardNumberOrInternalFacilityIndication  
  trapSecondChannelNumberOrInternalFacility  

marathon-netrunner 1.3.6.1.4.1.335.1.1
OBJECT IDENTIFIER    

micom-proxy 1.3.6.1.4.1.335.1.2
OBJECT IDENTIFIER    

marathon-netrunner-proxy 1.3.6.1.4.1.335.1.2.1
OBJECT IDENTIFIER    

security 1.3.6.1.4.1.335.1.2.1.1
OBJECT IDENTIFIER    

lcdSecurityPassword 1.3.6.1.4.1.335.1.2.1.1.1
Access password to the LCD/Keypad located on front of the integration unit.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

cmdPortSecurityGroup 1.3.6.1.4.1.335.1.2.1.1.2
OBJECT IDENTIFIER    

cmdPortSecurityGlobalPassword 1.3.6.1.4.1.335.1.2.1.1.2.1
Access password to all functions. Password must be alphanumeric characters (A-Z, 0-9) up to 8 characters.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

cmdPortSecurityStatusPassword 1.3.6.1.4.1.335.1.2.1.1.2.2
Access password to view, status, and exit Command Facility functions. Password must be alphanumeric characters (A-Z, 0-9) up to 8 characters.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

nmsSecurityPPPPassword 1.3.6.1.4.1.335.1.2.1.1.3
Access password to the Facility. Password must be alphanumeric characters (A-Z, 0-9) upto 8 characters.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

diagnostics 1.3.6.1.4.1.335.1.2.1.2
OBJECT IDENTIFIER    

pingResponse 1.3.6.1.4.1.335.1.2.1.2.1
Determines whether or not the node is reachable.
OBJECT-TYPE    
  INTEGER responded(1), notResponding(2)  

voiceChannelDiagTable 1.3.6.1.4.1.335.1.2.1.2.2
This table provides the system diagnostics function to test the voice/fax module(s) if installed.
OBJECT-TYPE    
  SEQUENCE OF  
    VoiceChannelDiagEntry

voiceChannelDiagEntry 1.3.6.1.4.1.335.1.2.1.2.2.1
An entry within the table specifying particular channel on voice module.
OBJECT-TYPE    
  VoiceChannelDiagEntry  

voiceChannelDiagCardNumber 1.3.6.1.4.1.335.1.2.1.2.2.1.1
Identifies the module/card number for the specified channel to be tested.
OBJECT-TYPE    
  INTEGER 1..5  

voiceChannelDiagChannelNumber 1.3.6.1.4.1.335.1.2.1.2.2.1.2
Identifies the channel number to which this entry pertains.
OBJECT-TYPE    
  INTEGER 1..12  

voiceChannelDiagCommand 1.3.6.1.4.1.335.1.2.1.2.2.1.3
Options to initiate different type of tests or to terminate the tests. Option 2 allows monitoring of the level of the input voice signal. Option 3 verifies that the voice channel is working properly. Option 4 causes the voice channel to compress the local speech signal and then to pass this signal through the reconstruction process back to the local receiver.
OBJECT-TYPE    
  INTEGER terminateTest(1), inputLevelDisplay(2), selfTest(3), putChannelInLoopback(4)  

syncChannelDiagTable 1.3.6.1.4.1.335.1.2.1.2.3
Table to control the testing and diagnosing of specific sync channel.
OBJECT-TYPE    
  SEQUENCE OF  
    SyncChannelDiagEntry

syncChannelDiagEntry 1.3.6.1.4.1.335.1.2.1.2.3.1
Entry into the diagnostic table for a specific channel on specified module.
OBJECT-TYPE    
  SyncChannelDiagEntry  

syncChannelDiagCardNumber 1.3.6.1.4.1.335.1.2.1.2.3.1.1
The specified module/card number of the channel to be tested.
OBJECT-TYPE    
  INTEGER 1..5  

syncChannelDiagChannelNumber 1.3.6.1.4.1.335.1.2.1.2.3.1.2
The specified channel number to be tested.
OBJECT-TYPE    
  INTEGER 1..6  

syncChannelDiagCommand 1.3.6.1.4.1.335.1.2.1.2.3.1.3
Command option to terminate and initiate the test. The test loops the control signals and data back.
OBJECT-TYPE    
  INTEGER terminateTest(1), putChannelInLoopback(2)  

configuration 1.3.6.1.4.1.335.1.2.1.3
OBJECT IDENTIFIER    

system 1.3.6.1.4.1.335.1.2.1.3.1
OBJECT IDENTIFIER    

attributes 1.3.6.1.4.1.335.1.2.1.3.1.1
OBJECT IDENTIFIER    

sysPromID 1.3.6.1.4.1.335.1.2.1.3.1.1.1
Identifies the unique PROM identifier.
OBJECT-TYPE    
  DisplayString SIZE(1..18)  

sysTypeGroup 1.3.6.1.4.1.335.1.2.1.3.1.1.2
OBJECT IDENTIFIER    

sysSoftwareType 1.3.6.1.4.1.335.1.2.1.3.1.1.2.1
Identifies the software base type running on the Integration unit.
OBJECT-TYPE    
  INTEGER marathon(1), netrunner(2)  

sysHardwareType 1.3.6.1.4.1.335.1.2.1.3.1.1.2.2
Identifies the type of CCM module present in the Integration unit.
OBJECT-TYPE    
  INTEGER unknown(1), fiftyECCM(2), oneKCCM(3), fiveKCCM(4), tenKCCM(5), fiveKTurboCCM(6), twentyKCCM(7), seventyfiveECCM(8), seventyfiveEwithFR(9), twoKCCM(10), threeK(11), twoKTPro(12), fiveKTPro(13), twentyKPro(14)  

sysOperationalType 1.3.6.1.4.1.335.1.2.1.3.1.1.2.3
Identifies the operational type of the Integration unit as node or feeder.
OBJECT-TYPE    
  INTEGER node(1), feeder(2)  

sysSoftwarePhase 1.3.6.1.4.1.335.1.2.1.3.1.1.2.4
Identifies the revision of the operating software running on the node.
OBJECT-TYPE    
  INTEGER phase3dot0(1), phase3dot1(2), phase3dot2(3), phase3dot2C(4), phase4dot0(5), phase4dot1(6), phase4dot2(7), phase4dot1G(8), phase4dot2c(9), phase4dot3(10), phase5dot0(11), phase4dot3BorC(12), phase5dot0B(13), aboveKnownPhases(999)  

sysFeatureType 1.3.6.1.4.1.335.1.2.1.3.1.1.2.5
Identifies the type of the feature pack installed on the unit.
OBJECT-TYPE    
  INTEGER featurePak(1), dualBank(2), singleBank(3), simSingleDual(4)  

sysFeatureRTC 1.3.6.1.4.1.335.1.2.1.3.1.1.2.6
Identifies whether or not the real time clock is present on the unit. Note that NMS modules are available with RTC.
OBJECT-TYPE    
  INTEGER present(1), notPresent(2)  

sysLocNodeLinkTable 1.3.6.1.4.1.335.1.2.1.3.1.1.3
Table containing MB-Feeder connection information.
OBJECT-TYPE    
  SEQUENCE OF  
    SysLocNodeLinkEntry

sysLocNodeLinkEntry 1.3.6.1.4.1.335.1.2.1.3.1.1.3.1
Entry within the table identifying the name, type, and number of connected MB-Feeder (if any).
OBJECT-TYPE    
  SysLocNodeLinkEntry  

sysLocNodeLinkIndex 1.3.6.1.4.1.335.1.2.1.3.1.1.3.1.1
Instances into the table for each (1-6) link entry.
OBJECT-TYPE    
  INTEGER 1..6  

sysLocNodeLinkNodeNameOfFeeder 1.3.6.1.4.1.335.1.2.1.3.1.1.3.1.2
Indicates the name of the connected (if any) feeder to a particular port.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

sysLocNodeLinkNodeType 1.3.6.1.4.1.335.1.2.1.3.1.1.3.1.3
Identifies whether or not the MB-Feeder is connected to a particular port.
OBJECT-TYPE    
  INTEGER notConfigured(1), marathon(2), mbFeeder(3)  

sysLocNodeLinkNodeNumber 1.3.6.1.4.1.335.1.2.1.3.1.1.3.1.4
Indicates the number of the connected (if any) feeder to a particular port. A value of zero represent that the feeder is not present.
OBJECT-TYPE    
  INTEGER 0..255  

sysDateTime 1.3.6.1.4.1.335.1.2.1.3.1.1.4
Sets the current date and the time on the unit. Format (byte sequence) is Month, Day, Hour, Minutes, Seconds, Day of Week, Year.
OBJECT-TYPE    
  OCTET STRING SIZE(7)  

sysClassCfgTable 1.3.6.1.4.1.335.1.2.1.3.1.1.5
Table to configure a class. Class is defined as a port or grouping of ports dedicated to a specific application or location.
OBJECT-TYPE    
  SEQUENCE OF  
    SysClassCfgEntry

sysClassCfgEntry 1.3.6.1.4.1.335.1.2.1.3.1.1.5.1
An entry into the table for a specific class number.
OBJECT-TYPE    
  SysClassCfgEntry  

sysClassCfgClassNumber 1.3.6.1.4.1.335.1.2.1.3.1.1.5.1.1
The available class to be configured numbered from 1 to 64.
OBJECT-TYPE    
  INTEGER 1..64  

sysClassCfgClassName 1.3.6.1.4.1.335.1.2.1.3.1.1.5.1.2
Assigns a class name to a selected class number. Class name can be up to eight characters long and may use characters A-Z, 0-9, and _.
OBJECT-TYPE    
  DisplayString SIZE(2..8)  

sysClassCfgClassSecondary 1.3.6.1.4.1.335.1.2.1.3.1.1.5.1.3
The designated secondary class to the specified class used to automatically route connections to this class if the primary class channels are busy.
OBJECT-TYPE    
  INTEGER 0..64  

sysClassCfgClassMessage 1.3.6.1.4.1.335.1.2.1.3.1.1.5.1.4
Displays (on command facility) when the user connects to a port within the class.
OBJECT-TYPE    
  DisplayString SIZE(0..61)  

sysClassCfgClassPassword 1.3.6.1.4.1.335.1.2.1.3.1.1.5.1.5
Protects the access to a particular class. The default is no password (NULL Password).
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

sysClassCfgNoActivityTimeOut 1.3.6.1.4.1.335.1.2.1.3.1.1.5.1.6
The no activity feature monitors the class channel. After a specified period of time, if there is no activity on the channel, it will be disconnected. Value 0 = disabled; values 1-255 = the timeout interval in minutes.
OBJECT-TYPE    
  INTEGER 0..255  

sysClassCfgEntryStatus 1.3.6.1.4.1.335.1.2.1.3.1.1.5.1.7
Object to create conceptual row entry in the table. Internally used to cache all the column objects till the commit is done through active(1). Option 6 (destroy) deletes the entry (class) from the configured classes.
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndWait(5), destroy(6)  

sysAccessNodeName 1.3.6.1.4.1.335.1.2.1.3.1.1.6
This is the name of the node which has been selected as the access point for the MICOMVision Manager in the Network. Configuring this object for a node results in the MICOM Alarms being forwarded to this specified Access node and the NMS system being informed of pending alarms awaiting retrieval.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

sysFlashDownloadGroup 1.3.6.1.4.1.335.1.2.1.3.1.1.7
OBJECT IDENTIFIER    

sysFlashDownloadPassword 1.3.6.1.4.1.335.1.2.1.3.1.1.7.1
Configures the security password for the download facility.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

sysFlashDownloadUseFile 1.3.6.1.4.1.335.1.2.1.3.1.1.7.2
Configures which Flash Bank that will be loaded from when the marathon is reset to re-load from flash.
OBJECT-TYPE    
  INTEGER mostRecent(1), useFileOne(2), useFileTwo(3)  

sysFlashDownloadDataActivityTimeout 1.3.6.1.4.1.335.1.2.1.3.1.1.7.3
Configures the Data Activity Timeout to be used while downloading an image to Flash Memory. The range is 30 - 240 seconds.
OBJECT-TYPE    
  INTEGER  

sysMeshRouting 1.3.6.1.4.1.335.1.2.1.3.1.1.8
Configures whether mesh routing is enabled for this Integration unit.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sysBootID 1.3.6.1.4.1.335.1.2.1.3.1.1.9
Indicates the boot identifier if boot prom is present.
OBJECT-TYPE    
  DisplayString SIZE(1..18)  

sysNetTime 1.3.6.1.4.1.335.1.2.1.3.1.1.10
The date and time to be configured on all the Integration units on the network. Format (byte sequence) is Month, Day, Hour, Minutes, Seconds, Day of Week, Year.
OBJECT-TYPE    
  OCTET STRING SIZE(7)  

sysCodeDownloadGroup 1.3.6.1.4.1.335.1.2.1.3.1.1.11
OBJECT IDENTIFIER    

sysCodeDownloadType 1.3.6.1.4.1.335.1.2.1.3.1.1.11.1
Identifies the type of Code Download that is to be performed.
OBJECT-TYPE    
  INTEGER ccmBase(1), voiceModule(2), tamModule(3), eamModule(4), eli2Module(5)  

sysCodeDownloadNodeName 1.3.6.1.4.1.335.1.2.1.3.1.1.11.2
The name of the node to which software is to be downloaded.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

sysCodeDownloadSlotNumber 1.3.6.1.4.1.335.1.2.1.3.1.1.11.3
The slot number of the module to which software is to be downloaded.
OBJECT-TYPE    
  INTEGER 1..5  

sysCodeDownloadChannelNumber 1.3.6.1.4.1.335.1.2.1.3.1.1.11.4
The Voice Channel number to which software is to be downloaded. Only valid for Voice.
OBJECT-TYPE    
  INTEGER  

sysCodeDownloadImageFile 1.3.6.1.4.1.335.1.2.1.3.1.1.11.5
The name of the code image file to be downloaded.
OBJECT-TYPE    
  DisplayString SIZE(0..15)  

sysCodeDownloadFlashBank 1.3.6.1.4.1.335.1.2.1.3.1.1.11.6
The destination flash bank to be downloaded. Only for CCM download.
OBJECT-TYPE    
  INTEGER 1..2  

sysCodeDownloadRestartFromBank 1.3.6.1.4.1.335.1.2.1.3.1.1.11.7
Identifies the subsequent flash bank to be started from. Only for CCM download.
OBJECT-TYPE    
  INTEGER bankOne(1), bankTwo(2), mostRecent(3)  

sysCodeDownloadReset 1.3.6.1.4.1.335.1.2.1.3.1.1.11.8
Value of 1 identifies that the reset of the module/node is required after successful download.
OBJECT-TYPE    
  INTEGER resetAfterDownload(1), dontResetAfterDownload(2)  

sysCodeDownloadActionStatus 1.3.6.1.4.1.335.1.2.1.3.1.1.11.9
Option 0 initiates a request for the code download. The status of the process is conveyed via options 1 through n.
OBJECT-TYPE    
  INTEGER  

sysCodeDownloadFileSize 1.3.6.1.4.1.335.1.2.1.3.1.1.11.10
This is the Total Number of Bytes in the image file that is being downloaded. Valid only after a download has started.
OBJECT-TYPE    
  INTEGER  

sysCodeDownloadBytesDownloaded 1.3.6.1.4.1.335.1.2.1.3.1.1.11.11
This is the Total Number of Bytes that have been sent to the Integration unit. Upon completion, this should equal the sysCodeDownloadFileSize paramater. Valid only after a download has been started.
OBJECT-TYPE    
  INTEGER  

sysCodeDownloadNodeNumber 1.3.6.1.4.1.335.1.2.1.3.1.1.11.12
The numeric value (Node ID #) that represents this node in the network.
OBJECT-TYPE    
  INTEGER  

messages 1.3.6.1.4.1.335.1.2.1.3.1.2
OBJECT IDENTIFIER    

sysMessageWelcome 1.3.6.1.4.1.335.1.2.1.3.1.2.1
Displays when the user first successfully connects to the Integration unit.
OBJECT-TYPE    
  DisplayString SIZE(1..61)  

sysMessageChannelPasswd 1.3.6.1.4.1.335.1.2.1.3.1.2.2
Prompts the user for the password associated for the sign-on channel. This is the first dialog message that appears when the user attempts to connect to the network from the command line facility.
OBJECT-TYPE    
  DisplayString SIZE(1..31)  

sysMessageClassRequest 1.3.6.1.4.1.335.1.2.1.3.1.2.3
Prompts (at the command facility line) the async channel user for the destination class or channel.
OBJECT-TYPE    
  DisplayString SIZE(1..31)  

sysMessageConnected 1.3.6.1.4.1.335.1.2.1.3.1.2.4
Displays (on the command facility line) when a connection to any resource (class or matrix switch) has been established across an interconnect link .
OBJECT-TYPE    
  DisplayString SIZE(1..31)  

sysMessageQueued 1.3.6.1.4.1.335.1.2.1.3.1.2.5
Displays (on the command facility line) when a user is waiting far a channel in wait queue.
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

sysMessageDisconnected 1.3.6.1.4.1.335.1.2.1.3.1.2.6
Displays (on the command facility line) when the connection has been broken. It is only sent to the call originator using switching (This is not for force connections).
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

sysMessageCallInProgress 1.3.6.1.4.1.335.1.2.1.3.1.2.7
Displays (on the command facility line) while the call is in process of being connected.
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

sysMessageNoAnswer 1.3.6.1.4.1.335.1.2.1.3.1.2.8
Displays (on the command facility line) when there is no answer from the destination port.
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

sysMessageUnassigned 1.3.6.1.4.1.335.1.2.1.3.1.2.9
Displays (on the command facility line) when a node, class or channel is unknown in the network.
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

sysMessageUnavailable 1.3.6.1.4.1.335.1.2.1.3.1.2.10
Displays (on the command facility line) when a user request a resource which exists, but is not in service (operational).
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

sysMessageBusy 1.3.6.1.4.1.335.1.2.1.3.1.2.11
Displays (on the command facility line) only to the user using matrix switching when the requested resource is in use.
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

sysMessageIncompatible 1.3.6.1.4.1.335.1.2.1.3.1.2.12
Displays (on the command facility line) for any attempted connection that is not compatible with the configuration.
OBJECT-TYPE    
  DisplayString SIZE(1..17)  

sysMessageClassPasswd 1.3.6.1.4.1.335.1.2.1.3.1.2.13
Prompts (on the command facility line) for the password of the requested class.
OBJECT-TYPE    
  DisplayString SIZE(1..31)  

sysMessageLCDKeypadBanner 1.3.6.1.4.1.335.1.2.1.3.1.2.14
Displays the banner string on the LCD keypad.
OBJECT-TYPE    
  DisplayString SIZE(1..20)  

card 1.3.6.1.4.1.335.1.2.1.3.2
OBJECT IDENTIFIER    

cardTable 1.3.6.1.4.1.335.1.2.1.3.2.1
Table to view the hardware configuration of the Integration unit.
OBJECT-TYPE    
  SEQUENCE OF  
    CardEntry

cardEntry 1.3.6.1.4.1.335.1.2.1.3.2.1.1
Entry pertaining to the present module(s).
OBJECT-TYPE    
  CardEntry  

cardSlotNumber 1.3.6.1.4.1.335.1.2.1.3.2.1.1.1
Identifies the location of the module within the unit.
OBJECT-TYPE    
  INTEGER slotA(1), slotB(2), slotC(3), slotD(4), slotE(5), slotNMS(6)  

cardModuleID 1.3.6.1.4.1.335.1.2.1.3.2.1.1.2
Identifies the part number of the module in the specific location. 0FFFFh if no NMS card installed, 03ffh if no card installed.
OBJECT-TYPE    
  INTEGER modCcmDmaESD(1), modCcmDmaDual20Mhz(2), mod5kCcm(4), mod5kCcmwESD(5), mod5kCcmOem(6), modNMS(8), modNMS-RTC(9), mod1kCcm(12), mod50ECcm(13), mod1kCcmOem(14), mod50ECcmOem(15), mod10kCcm(16), mod10kCcmOem(18), mod20kCcm(20), mod5kTurboCcm(24), mod5kTurboProCcm(28), mod20kProCcm(36), modCEM12Async-1D(48), modCEM12Async-1DwESD(49), modCEM12Async-LD(52), modCEM12Async-LDwESD(53), modCEM6SyncAsync(56), modCEM6SyncAsync-ESD(57), modCEM6SyncAsyncDma(60), modCEM6SyncAsyncDma-ESD(61), modCEM32-IDD2x16(64), modCEM6AsyncOnly(68), modCEM32-IDD(72), mod75ECcm-FrameRelay(76), mod75ECcm-FrameRelayOEM(78), mod2kCcm(80), mod2kCcmOEM(82), mod3kCcmSingleVoice(84), mod3kCcmDualVoice(85), mod75ECcm(92), mod75ECcmOEM(94), modVoice-1-chan(96), modVoice-2-chan(97), modVoice-1-chan-International(104), modVoice-2-chan-International(105), modVoice-1-chan-UVM(108), modVoice-2-chan-UVM(109), modDigitalVoiceExp(112), modVoice-1-chan-TUVM(116), modVoice-2-chan-TUVM(117), modVoice-1-chan-CVM(120), modVoice-2-chan-CVM(121), mod2kTurboCcm(156), modLan-eli-1(320), modLan-eli-1-DualProc(321), modLan-eli-2(322), modLan-RemoteLanRouter(340), modLan-RemoteLanRouter-LowCost(344), modIsdnMultipleBri(1000), modIsdnSingleBri(1001), modE1AccessDualPort(992), modE1AccessSinglePort(993), modE1AccessDualPortNoLinks(994), modE1AccessSinglePortNoLinks(995), modT1AccessDualPort(996), modT1AccessSinglePort(997), modT1AccessDualPortNoLinks(998), modT1AccessSinglePortNoLinks(999), modModem14dot4Kb(1005), modModem9dot6Kb(1008), modModem12dot4KbParadyne(1009), modModem19dot2KbParadyne(1010), modIsu-1-chan(1012), modIsu-2-chan(1013), modCEM6Dma(1016)  

cardPcbRevision 1.3.6.1.4.1.335.1.2.1.3.2.1.1.3
Identifies the revision level of the module. 0ffh if no NMS card installed, 03Fh if no card installed.
OBJECT-TYPE    
  INTEGER revA(1), revB(2), revC(3), revD(4), revE(5), revF(6), revG(7), revH(8), revI(9), revJ(10), revK(11), revL(12), revM(13), revN(14), revO(15), revP(16), revQ(17), revR(18), revS(19), revT(20), revU(21), revV(22), revW(23), revX(24), revY(25), revZ(26), revAA(27), revAB(28), revAC(29), revAD(30), revAE(31), revAF(32), revAG(33), revAH(34), revAI(35), revAJ(36), revAK(37), revAL(38), revAM(39), revAN(40), revAO(41), revAP(42), revAQ(43), revAR(44), revAS(45), revAT(46), revAU(47), revAV(48), revAW(49), revAX(50), revAY(51), revAZ(52), rev1(53), rev2(54), rev3(55), rev4(56), rev5(57), rev6(58), rev7(59), rev8(60), rev9(61), rev10(62), rev11(63), rev12(64)  

numberOfCards 1.3.6.1.4.1.335.1.2.1.3.2.2
The total number of cards installed in the Integration unit.
OBJECT-TYPE    
  INTEGER 1..6  

eliCardFunctionTable 1.3.6.1.4.1.335.1.2.1.3.2.3
Table containing the functionality on resident eli cards (if any).
OBJECT-TYPE    
  SEQUENCE OF  
    EliCardFunctionEntry

eliCardFunctionEntry 1.3.6.1.4.1.335.1.2.1.3.2.3.1
Entry within the table to specify a particular slot where an eli card is located.
OBJECT-TYPE    
  EliCardFunctionEntry  

eliCardFunctionSlotNumber 1.3.6.1.4.1.335.1.2.1.3.2.3.1.1
The slot number of the eli card.
OBJECT-TYPE    
  INTEGER 2..5  

eliCardFunctionPromID 1.3.6.1.4.1.335.1.2.1.3.2.3.1.2
The prom part number of the software that is installed and running on the eli card.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

eliCardFunctionTypeRTSFunction 1.3.6.1.4.1.335.1.2.1.3.2.3.1.3
Identifies whether this eli card performs the function of an RTS or not.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

eliCardFunctionTypeBridgeFunction 1.3.6.1.4.1.335.1.2.1.3.2.3.1.4
Identifies whether this eli card performs the function of a bridge or not.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

eliCardFunctionTypeRouterFunction 1.3.6.1.4.1.335.1.2.1.3.2.3.1.5
Identifies whether this eli card performs the function of a router or not.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

eliCardFunctionFlashMemory 1.3.6.1.4.1.335.1.2.1.3.2.3.1.6
Identifies whether this eli card contains flash memory or not.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

t1e1CardSoftwareInfoTable 1.3.6.1.4.1.335.1.2.1.3.2.4
Table describing the software on resident (if any) T1 or E1 card.
OBJECT-TYPE    
  SEQUENCE OF  
    T1e1CardSoftwareInfoEntry

t1e1CardSoftwareInfoEntry 1.3.6.1.4.1.335.1.2.1.3.2.4.1
Entry within the table to specify a particular T1 or E1 card.
OBJECT-TYPE    
  T1e1CardSoftwareInfoEntry  

t1e1CardSoftwareInfoCardNumber 1.3.6.1.4.1.335.1.2.1.3.2.4.1.1
Displays the Card number of the T1 or E1 module.
OBJECT-TYPE    
  INTEGER 2..5  

t1e1CardSoftwareInfoCardType 1.3.6.1.4.1.335.1.2.1.3.2.4.1.2
Displays the access module type; T1 or E1.
OBJECT-TYPE    
  INTEGER t1(1), e1(2)  

t1e1CardSoftwareInfoReleaseLevel 1.3.6.1.4.1.335.1.2.1.3.2.4.1.3
Displays which Software release is installed on the T1/E1 card.
OBJECT-TYPE    
  INTEGER releaseZero(1), releaseOne(2), releaseTwo(3)  

t1e1CardSoftwareInfoSoftwareID 1.3.6.1.4.1.335.1.2.1.3.2.4.1.4
Displays which Software part number is installed on the T1/E1 card.
OBJECT-TYPE    
  DisplayString  

t1e1CardSoftwareInfoBootCode 1.3.6.1.4.1.335.1.2.1.3.2.4.1.5
Displays which boot prom part number is installed on the T1/E1 card.
OBJECT-TYPE    
  DisplayString  

port 1.3.6.1.4.1.335.1.2.1.3.3
OBJECT IDENTIFIER    

portCfgTable 1.3.6.1.4.1.335.1.2.1.3.3.1
Table to establish the type of port connection to be assigned to the selected port.
OBJECT-TYPE    
  SEQUENCE OF  
    PortCfgEntry

portCfgEntry 1.3.6.1.4.1.335.1.2.1.3.3.1.1
Entry into the table for the selected port.
OBJECT-TYPE    
  PortCfgEntry  

portCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.3.1.1.1
Indicates the card/module of the channel to be configured.
OBJECT-TYPE    
  INTEGER 1..5  

portCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.3.1.1.2
Indicates the channel/port number to be configured.
OBJECT-TYPE    
  INTEGER 1..6  

portCfgChannelType 1.3.6.1.4.1.335.1.2.1.3.3.1.1.3
Assigns the type of connection to the selected port. Note: A node reset is required after setting the port configuration. Also note that if a channel is currently connected, forced or switch connected, the channel must first be disconnected. The procedure to do this would be to place the channel out of service (chControlCommand disable(2)), then disconnect (chControlCommand forceDIsconnect(4)) the channel.
OBJECT-TYPE    
  INTEGER mux(1), async(2), sync(3), esi(4), x21(5), localEsi(6), esiSecondary(7), frameRelay(8)  

syncPortCfgTable 1.3.6.1.4.1.335.1.2.1.3.3.2
Table to configure the protocol for the specified sync channel.
OBJECT-TYPE    
  SEQUENCE OF  
    SyncPortCfgEntry

syncPortCfgEntry 1.3.6.1.4.1.335.1.2.1.3.3.2.1
Entry into the table specifying a particular channel on a particular module/card.
OBJECT-TYPE    
  SyncPortCfgEntry  

syncPortCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.3.2.1.1
Identifies the card/module of the sync channel to be configured.
OBJECT-TYPE    
  INTEGER 1..5  

syncPortCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.3.2.1.2
Indicates the sync channel number to be configured.
OBJECT-TYPE    
  INTEGER 1..6  

syncPortCfgProtocol 1.3.6.1.4.1.335.1.2.1.3.3.2.1.3
Assigns the sync protocol to the selected port. Note: A node reset is required after the protocol is configured.
OBJECT-TYPE    
  INTEGER dlcChannel(1), asciiBisync(2), ebcdicBisync(3), hpSync(4), rts(5), syncPad(6), micomDlc(7), micomVoice(8), fastPacket(9), tdm(10)  

fCmdPortPhyParaTable 1.3.6.1.4.1.335.1.2.1.3.3.3
Table of configurations for the physical parameters of the fixed command port on an NMS module.
OBJECT-TYPE    
  SEQUENCE OF  
    FCmdPortPhyParaEntry

fCmdPortPhyParaEntry 1.3.6.1.4.1.335.1.2.1.3.3.3.1
Entry within the table to specify the fixed command port channel number (2) on an NMS module/card (6).
OBJECT-TYPE    
  FCmdPortPhyParaEntry  

fCmdPortPhyParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.3.3.1.1
The card number (=6) of the NMS module containing the fixed cmd port.
OBJECT-TYPE    
  INTEGER 6  

fCmdPortPhyParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.3.3.1.2
The channel number (=2) of the fixed cmd port on the NMS module.
OBJECT-TYPE    
  INTEGER 2  

fCmdPortPhyParaStopBits 1.3.6.1.4.1.335.1.2.1.3.3.3.1.3
Sets the number of stop-bits inserted at the end of a character.
OBJECT-TYPE    
  INTEGER onebit(1), onePointFiveBits(2), twoBits(3)  

fCmdPortPhyParaCodeLevel 1.3.6.1.4.1.335.1.2.1.3.3.3.1.4
Sets the number of data bits per character. This includes the parity bit.
OBJECT-TYPE    
  INTEGER fiveBits(1), sixBits(2), sevenBits(3), eightBits(4), nineBits(5)  

fCmdPortPhyParaDataRate 1.3.6.1.4.1.335.1.2.1.3.3.3.1.5
Sets the data rate in bits per seconds of the fixed command port.
OBJECT-TYPE    
  INTEGER abr(1), rate50(2), rate75(3), rate110(4), rate134dot5(5), rate150(6), rate200(7), rate225(8), rate300(9), rate600(10), rate1200(11), rate1800(12), rate2400(13), rate3600(14), rate4800(15), rate7200(16), rate9600(17), rate14400(18), rate19200(19), rate28800(20), rate38400(21)  

fCmdPortPhyParaEcho 1.3.6.1.4.1.335.1.2.1.3.3.3.1.6
Determines whether the Integration unit should echo input from the terminal or not.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

fCmdPortPhyParaCRDelay 1.3.6.1.4.1.335.1.2.1.3.3.3.1.7
Configures the number of character delays that should be introduced after each CR (carriage return).
OBJECT-TYPE    
  INTEGER 0..99  

fCmdPortPhyParaLFDelay 1.3.6.1.4.1.335.1.2.1.3.3.3.1.8
Configures the number of character delays that should be introduced after each LF (line feed).
OBJECT-TYPE    
  INTEGER 0..99  

fCmdPortPhyParaFFDelay 1.3.6.1.4.1.335.1.2.1.3.3.3.1.9
Configures the number of chanacter delays that should be introduced afer each FF (form feed).
OBJECT-TYPE    
  INTEGER 0..99  

fCmdPortPhyParaParity 1.3.6.1.4.1.335.1.2.1.3.3.3.1.10
Sets the message and data parity.
OBJECT-TYPE    
  INTEGER space(1), odd(2), even(3), mark(4), none(5), auto(6)  

logPortPhyParaTable 1.3.6.1.4.1.335.1.2.1.3.3.4
Table to configure the log port (present on NMS module) parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    LogPortPhyParaEntry

logPortPhyParaEntry 1.3.6.1.4.1.335.1.2.1.3.3.4.1
Entry within the table to specify the log port channel number (1) on an NMS module/card (6).
OBJECT-TYPE    
  LogPortPhyParaEntry  

logPortPhyParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.3.4.1.1
The card number (=6) of the NMS Module that contains the log port.
OBJECT-TYPE    
  INTEGER 6  

logPortPhyParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.3.4.1.2
The channel number of the log port (=1).
OBJECT-TYPE    
  INTEGER 1  

logPortPhyParaStopBits 1.3.6.1.4.1.335.1.2.1.3.3.4.1.3
Configures the number of stop bits that the Integration unit should generate and check for on this channel.
OBJECT-TYPE    
  INTEGER oneBit(1), onePointFiveBits(2), twoBits(3)  

logPortPhyParaCodeLevel 1.3.6.1.4.1.335.1.2.1.3.3.4.1.4
Sets the number of data bits per character. This includes the parity bit.
OBJECT-TYPE    
  INTEGER fiveBits(1), sixBits(2), sevenBits(3), eightBits(4), nineBits(5)  

logPortPhyParaDataRate 1.3.6.1.4.1.335.1.2.1.3.3.4.1.5
Sets the data rate in bits per seconds of the log port.
OBJECT-TYPE    
  INTEGER rate50(2), rate75(3), rate110(4), rate134dot5(5), rate150(6), rate200(7), rate300(9), rate600(10), rate1200(11), rate1800(12), rate2400(13), rate3600(14), rate4800(15), rate7200(16), rate9600(17), rate14400(18), rate19200(19), rate28800(20), rate38400(21)  

logPortPhyParaCRDelay 1.3.6.1.4.1.335.1.2.1.3.3.4.1.6
Configures the number of Character Delays required to be inserted after each CR (carriage return).
OBJECT-TYPE    
  INTEGER 0..99  

logPortPhyParaLFDelay 1.3.6.1.4.1.335.1.2.1.3.3.4.1.7
Configures the number of Character Delays required to be inserted after each LF (Line Feed).
OBJECT-TYPE    
  INTEGER 0..99  

logPortPhyParaFFDelay 1.3.6.1.4.1.335.1.2.1.3.3.4.1.8
Configures the number of Character Delays required to be inserted after each FF (form feed).
OBJECT-TYPE    
  INTEGER 0..99  

logPortPhyParaXONChar 1.3.6.1.4.1.335.1.2.1.3.3.4.1.9
Configures which character the Integration unit should check for and respond to for stopping data flow on a channel.
OBJECT-TYPE    
  INTEGER dc1(1), dc2(2), dc3(3), dc4(4)  

logPortPhyParaXOFFChar 1.3.6.1.4.1.335.1.2.1.3.3.4.1.10
Configures which character the Marathon should check for and respond to for re-starting data flow on a channel.
OBJECT-TYPE    
  INTEGER dc1(1), dc2(2), dc3(3), dc4(4)  

logPortPhyParaFlowControl 1.3.6.1.4.1.335.1.2.1.3.3.4.1.11
Configures which type of flow control should be used for the log port.
OBJECT-TYPE    
  INTEGER none(1), xonXof(2), dtr(3), xonXofDtr(4), wangx(5), rts(6), dataGeneral(7)  

logPortPhyParaBufferControl 1.3.6.1.4.1.335.1.2.1.3.3.4.1.12
Configures what type of buffer control to be used in the communications with the log port.
OBJECT-TYPE    
  INTEGER none(1), xonXof(2), cts(3), wangx(4)  

logPortPhyParaParity 1.3.6.1.4.1.335.1.2.1.3.3.4.1.13
Configures what type of parity to use with the log port.
OBJECT-TYPE    
  INTEGER space(1), odd(2), even(3), mark(4), none(5)  

commandPortExtModemNumber 1.3.6.1.4.1.335.1.2.1.3.3.5
Modem phone number to call to send ASCII events out.
OBJECT-TYPE    
  DisplayString SIZE(0..32)  

commandPortDataActivityTimeout 1.3.6.1.4.1.335.1.2.1.3.3.6
Configures the command facility port inactivity timeout (minutes).
OBJECT-TYPE    
  INTEGER 0..60  

syncPortPreConfigTable 1.3.6.1.4.1.335.1.2.1.3.3.7
Table to configure a sync channel protocol prior to configuring a port as a sync channel. By using this table to 'preset' the sync protocol, only 1 node reset is needed following the sync channel assignment to complete the configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    SyncPortPreConfigEntry

syncPortPreConfigEntry 1.3.6.1.4.1.335.1.2.1.3.3.7.1
Entry within the table to specify a particular sync channel for pre-configuration on a specific module/card.
OBJECT-TYPE    
  SyncPortPreConfigEntry  

syncPortPreConfigCardNumber 1.3.6.1.4.1.335.1.2.1.3.3.7.1.1
Identifies the module/card for sync channel pre-configuration.
OBJECT-TYPE    
  INTEGER 1..5  

syncPortPreConfigChannelNumber 1.3.6.1.4.1.335.1.2.1.3.3.7.1.2
Identifies the port number for sync channel pre-configuration.
OBJECT-TYPE    
  INTEGER 1..6  

syncPortPreConfigProtocol 1.3.6.1.4.1.335.1.2.1.3.3.7.1.3
The protocol to be used for pre-configuring a sync channel.
OBJECT-TYPE    
  INTEGER dlcChannel(1), asciiBisync(2), ebcdicBisync(3), hpSync(4), rts(5), syncPad(6), micomDlc(7), micomVoice(8), fastPacket(9), tdm(10)  

channel 1.3.6.1.4.1.335.1.2.1.3.4
OBJECT IDENTIFIER    

sync-channel 1.3.6.1.4.1.335.1.2.1.3.4.1
OBJECT IDENTIFIER    

syncChPhyParaTable 1.3.6.1.4.1.335.1.2.1.3.4.1.1
For the configuration of synchronous channels, this table controls and modifies the operating parameters for the port.
OBJECT-TYPE    
  SEQUENCE OF  
    SyncChPhyParaEntry

syncChPhyParaEntry 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1
Entry into the table pertaining to a specific sync channel on a specific module.
OBJECT-TYPE    
  SyncChPhyParaEntry  

syncChPhyParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.1
The card/module number of the channel this entry pertains to.
OBJECT-TYPE    
  INTEGER 1..5  

syncChPhyParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.2
The channel number on a specified module this configuration entry pertains to.
OBJECT-TYPE    
  INTEGER 1..6  

syncChPhyParaDataRate 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.3
Sets data rate in bits per second for the user sync channel. Default is 2400.
OBJECT-TYPE    
  INTEGER rate1200(1), rate2400(2), rate3600(3), rate4800(4), rate7200(5), rate9600(6), rate12000(7), rate14400(8), rate16800(9), rate19200(10), rate28800(11), rate38400(12), rate48000(13), rate56000(14), rate64000(15)  

syncChPhyParaCarrierMode 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.4
Defines when carrier is held high, either constant or variable. This parameter is configurable for all Sync protocols EXCEPT tdm(10) and fastPacket(9). For Sync protocol, rtsCts(5), the parameter default is Option 'variable(1)'. For Sync protocols - dlcChannel(1), asciiBisync(2), ebcdicBisync(3), hpSync(4), syncPad(6), micomDlc(7), and micomVoice(8); the parameter default is Option 'constant(2)'.
OBJECT-TYPE    
  INTEGER variable(1), constant(2)  

syncChPhyParaInterfaceType 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.5
Sets the user channel for toDTE to interface with data terminal equipment; and toDCE to interface with data communication equipment such as a tail-circuit modem. This parameter is configurable for all Sync protocols EXCEPT fastPacket(9).
OBJECT-TYPE    
  INTEGER toDTE(1), toDCE(2)  

syncChPhyParaIdleFill 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.6
Selects what the Integration unit will output when the line is idle. This parameter is configurable ONLY for Sync protocol dlcChannel(1).
OBJECT-TYPE    
  INTEGER flagFill(1), auto(2), autoMod128(3), markFill(4)  

syncChPhyParaHighSyncChar 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.7
Sets the value (high byte) of the leading sync character for the start of the block. This parameter is configurable ONLY for Sync protocol syncPad(6).
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

syncChPhyParaLowSyncChar 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.8
Sets the value (low byte) of the leading sync character for the start of the block. This parameter is configurable for all Sync protocols EXCEPT dlcChannel(1), micomDlc(7), and micomVoice(8).
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

syncChPhyParaNumLeadSyncCount 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.9
Sets the number of leading sync characters that the Integration unit will generate on the output (0-9). This will allow the device on the selected channel to synchronize. Enter zero to specify all leading syncs as transparent. They will not be stripped out. This parameter is ONLY configurable for Sync protocols asciiBisync(2), ebcdicBisync(3), hpSync(4), rtsCts(5), and syncPad(6),
OBJECT-TYPE    
  INTEGER 0..9  

syncChPhyParaMaxTxBlockSize 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.10
Sets the block size in bytes of the data to the Integration unit from the attached device. This parameter is configurable for all Sync protocols EXCEPT micomDlc(7), fastPacket(9), and tdm(10). For Sync protocol hpSync(4), the parameter default is 9876. For Sync protocol micomVoice(8), the parameter default is 1024. For Sync protocols dlcChannel(1), asciiBisync(2), ebcdicBisync(3), rtsCts(5), and syncPad(6); the parameter default is 512.
OBJECT-TYPE    
  INTEGER 1..9999  

syncChPhyParaPadChar 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.11
Sets the value of pad character (alpha numeric). It precedes the sync character and follows the end of the block. It is used to pad the block. This parameter is ONLY configurable for the Sync protocols asciiBisync(2), ebcdicBisync(3), hpSync(4), rtsCts(5), and syncPad(6).
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

syncChPhyParaNumLeadingPads 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.12
Sets the number of leading pad characters to be transmitted at the start of the block for a time delay (1-9). This parameter is ONLY configurable for the Sync protocols asciiBisync(2), ebcdicBisync(3), hpSync(4), rtsCts(5), and syncPad(6). For Sync protocols asciiBisync(2), ebcdicBisync(3), and hpSync(4) the parameter default is 1. For Sync protocol rtsCts(5) the default is 3. For Sync protocol syncPad(6) the default is 2.
OBJECT-TYPE    
  INTEGER 1..9  

syncChPhyParaNumTrailingPads 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.13
Sets the number of trailing pad characters to be transmitted at the end of the block. This parameter is ONLY configurable for the Sync protocols asciiBisync(2), ebcdicBisync(3), hpSync(4), rtsCts(5), and syncPad(6). For Sync protocols asciiBisync(2), ebcdicBisync(3), hpSync(4), and syncPad(6) the parameter default is 2. For Sync protocol rtsCts(5) the default is 3.
OBJECT-TYPE    
  INTEGER 0..20  

syncChPhyParaClockFlowControl 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.14
Selects whether or not the local sync channel will be flow controlled. This parameter is configurable for all Sync protocols EXCEPT fastPacket(9), and tdm(10).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

syncChPhyParaEncoding 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.15
Selects one of the two types of encoding, NRZ or NRZI, depending on the attached device. This parameter is ONLY configurable for Sync protocol dlcChannel(1).
OBJECT-TYPE    
  INTEGER nrz(1), nrzi(2)  

syncChPhyParaChTxClocking 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.16
Sets the channel's source for transmit clock. This parameter, combined with the syncChPhyParaChRxClocking parameter, corresponds to the Channel Clocking parameter which is displayed in the Sync channel configuration menu of the unit's facility. This parameter is configurable for all Sync protocols EXCEPT fastPacket(9).
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

syncChPhyParaChRxClocking 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.17
Sets the channel's source for receive clock. This parameter, combined with the syncChPhyParaChTxClocking parameter, corresponds to the Channel Clocking parameter which is displayed in the Sync channel configuration menu of the unit's facility. This parameter is configurable for all Sync protocols EXCEPT fastPacket(9).
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

syncChPhyParaPriority 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.18
Selects the priority of the port, high or low. This parameter is configurable for all Sync protocols EXCEPT tdm(10).
OBJECT-TYPE    
  INTEGER low(1), high(2)  

syncChPhyParaDSRControl 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.19
Selects whether the remote DTR changes appear on the local DSR or are ignored.
OBJECT-TYPE    
  INTEGER normal(1), fornedOn(2), localDTR(3)  

syncChPhyParaBufferControl 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.20
Used to regulate data transmission from a device attached to user channel. This parameter is configurable for all Sync protocols EXCEPT fastPacket(9) and tdm(10).
OBJECT-TYPE    
  INTEGER none(1), cts(2)  

syncChPhyParaMaxRxBlockSize 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.21
Sets the block size in bytes of the data to attached device from the Integration unit. This parameter is configurable for all Sync protocols EXCEPT micomDlc(7), fastPacket(9), and tdm(10). For Sync protocol hpSync(4), the parameter default is 9876. For Sync protocol micomVoice(8), the parameter default is 1024. For Sync protocols dlcChannel(1), asciiBisync(2), ebcdicBisync(3), rtsCts(5), and syncPad(6); the parameter default is 512.
OBJECT-TYPE    
  INTEGER 1..9999  

syncChPhyParaProtocol 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.22
Sets the sync channel protocol.
OBJECT-TYPE    
  INTEGER dlc(1), asciiBisync(2), ebcdicBisync(3), hpSync(4), rtsCts(5), syncPad(6), micomDlc(7), micomVoice(8), fastPacket(9), tdm(10)  

syncChPhyParaClaimedBandwidth 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.23
Sets the claimed bandwidth of the sync channel. This is the amount of bandwidth that should be reserved on a link for this channel / 10. -ie- If you want to reserve 9600 bps for this channel you should set this to 960. This parameter is configurable for all Sync protocols EXCEPT tdm(10).
OBJECT-TYPE    
  INTEGER  

syncChPhyParaDLCTransitRate 1.3.6.1.4.1.335.1.2.1.3.4.1.1.1.24
Sets the transit rate of the sync channel. This parameter is ONLY configurable for the Sync protocol dlcChannel(1).
OBJECT-TYPE    
  INTEGER channelRate(1), rate1200(2), rate2400(3), rate3600(4), rate4800(5), rate7200(6), rate9600(7), rate12000(8), rate14400(9), rate16800(10), rate19200(11), rate28800(12), rate38400(13), rate48000(14), rate56000(15), rate64000(16)  

async-channel 1.3.6.1.4.1.335.1.2.1.3.4.2
OBJECT IDENTIFIER    

asyncChPhyParaTable 1.3.6.1.4.1.335.1.2.1.3.4.2.1
For the configuration of asynchronous channels, this table controls and modifies the operating parameters for the port.
OBJECT-TYPE    
  SEQUENCE OF  
    AsyncChPhyParaEntry

asyncChPhyParaEntry 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1
Entry into the table pertaining to a specific channel on a specific module.
OBJECT-TYPE    
  AsyncChPhyParaEntry  

asyncChPhyParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.1
The module/card number containing the async channel to which the entry pertains to.
OBJECT-TYPE    
  INTEGER 1..5  

asyncChPhyParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.2
The async channel number to which the entry pertains to.
OBJECT-TYPE    
  INTEGER 1..32  

asyncChPhyParaStopBits 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.3
Sets the number of stop-bits inserted at the end of a character.
OBJECT-TYPE    
  INTEGER oneBit(1), onePointFiveBits(2), twoBits(3)  

asyncChPhyParaCodeLevel 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.4
Sets the number of data bits per character. This includes the parity bit.
OBJECT-TYPE    
  INTEGER fiveBits(1), sixBits(2), sevenBits(3), eightBits(4), nineBits(5)  

asyncChPhyParaDataRate 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.5
Sets the data rate in bits per seconds of the async user channel.
OBJECT-TYPE    
  INTEGER abr(1), rate50(2), rate75(3), rate110(4), rate134dot5(5), rate150(6), rate200(7), rate225(8), rate300(9), rate600(10), rate1200(11), rate1800(12), rate2400(13), rate3600(14), rate4800(15), rate7200(16), rate9600(17), rate14400(18), rate19200(19), rate28800(20), rate38400(21)  

asyncChPhyParaEcho 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.6
Turns the echo function on or off when the terminal(2) option is selected for the asyncChPhyParaConnectTo object.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChPhyParaHPXMode 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.7
Sould be set to ON only when Hewlett Packerd HP-3000 view systems using type 26XX display stations (operating under term type 10) are connected to the port being configured.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChPhyParaConnectTo 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.8
Sets the type of equipment which is connected to the port, a host or terminal (also printer).
OBJECT-TYPE    
  INTEGER host(1), terminal(2)  

asyncChPhyParaRemCTSControl 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.9
Determines whether remote CTS signal is strapped or transparent.
OBJECT-TYPE    
  INTEGER forcedOn(1), normal(2)  

asyncChPhyParaCRDelay 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.10
Sets the delay in character times to allow for mechanical action to take place when a carriage return control character is transmitted to a channel.
OBJECT-TYPE    
  INTEGER 0..99  

asyncChPhyParaLFDelay 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.11
Sets the delay in character times to allow for mechanical action to take place when a line feed control character is transmitted to a channel.
OBJECT-TYPE    
  INTEGER 0..99  

asyncChPhyParaFFDelay 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.12
Sets the delay in character times to allow for mechanical action to take place when a form feed control character is transmitted to a channel.
OBJECT-TYPE    
  INTEGER 0..99  

asyncChPhyParaXONChar 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.13
Defines the different XON characters.
OBJECT-TYPE    
  INTEGER dc1(1), dc2(2), dc3(3), dc4(4)  

asyncChPhyParaXOFFChar 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.14
Defines the different XOFF characters.
OBJECT-TYPE    
  INTEGER dc1(1), dc2(2), dc3(3), dc4(4)  

asyncChPhyParaCmdFacilityAccess 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.15
Permits or denies (the port being configured) access to the Command Facility Main Menu to view or change the system operating parameters.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChPhyParaCmdModeEntry 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.16
Selects the control character sequence to access to the Command Mode.
OBJECT-TYPE    
  INTEGER ctlXctlY(1), ctlXbreak(2)  

asyncChPhyParaLocChannelConfig 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.17
Controls the access to the Local Channel Configuration Menu.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChPhyParaCmdModeAccess 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.18
Permits or deny (the port being configured) access to the Command Mode.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChPhyParaTandemSupport 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.19
Should set to ON only when Tandem Computers are connected to the channel being configured.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChPhyParaSmoothScroll 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.20
Should be set to ON only when DEC VT100 smooth scroll terminals are connected to the system.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChPhyParaFlowControl 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.21
An attached device uses flow control to start or stop data flow from the Integration unit. The attached device may control data flow by use of XON/XOFF, DTR, XON/XOFF + DTR or a special WANGX character.
OBJECT-TYPE    
  INTEGER none(1), xonXof(2), dtr(3), xonXofDtr(4), wangx(5), rts(6), dataGeneral(7)  

asyncChPhyParaBufferControl 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.22
Buffer control to start or stop the data flow from the attached device. The attached device may control data flow by use of XON/XOFF, CTS, or a special WANGX character.
OBJECT-TYPE    
  INTEGER none(1), xonXof(2), cts(3), wangx(4)  

asyncChPhyParaFlowControlStrip 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.23
Allows the flow control characters to be passed through or stripped from the Integration unit.
OBJECT-TYPE    
  INTEGER strip(1), pass(2)  

asyncChPhyParaSyncLossDisconnect 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.24
When enabled, the local node toggles the controls and purges the data. This occurs when the link has experienced a sync loss condition for more than 20 seconds.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChPhyParaEIAControls 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.25
Ability to recognize or ignore the EIA control signals from the attached device.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChPhyParaPriority 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.26
Decides whether or not this channel is to receive a high or low priority for use. A high priority channel will take precedence over a channel with low priority.
OBJECT-TYPE    
  INTEGER high(1), low(2)  

asyncChPhyParaParity 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.27
Sets the message and data parity for the Integration unit. Depending on the asyncChPhyParaCodeLevel selection of 5-8 bits, the available parity is space, odd, even, mark, and none. For code level 9 bits, the available choice is odd or even.
OBJECT-TYPE    
  INTEGER space(1), odd(2), even(3), mark(4), none(5)  

asyncChPhyParaCompression 1.3.6.1.4.1.335.1.2.1.3.4.2.1.1.28
When enabled, the unit compresses a block of data when transmitting. Fewer bytes are required for the transfer thus increasing the data transfer rate (making it faster).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChSwParaTable 1.3.6.1.4.1.335.1.2.1.3.4.2.2
Table for configuration of async channel switching parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    AsyncChSwParaEntry

asyncChSwParaEntry 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1
Entry within the table to specify a particular async channel number on a specific module/card.
OBJECT-TYPE    
  AsyncChSwParaEntry  

asyncChSwParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.1
Identifies the module/card number for the async channel specific to the channel switching parameters.
OBJECT-TYPE    
  INTEGER 1..5  

asyncChSwParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.2
Identifies the async channel specific to the channel switching parameters.
OBJECT-TYPE    
  INTEGER 1..32  

asyncChSwParaDestinationClass 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.3
Assign the destination class name to the async channel for class switching.
OBJECT-TYPE    
  DisplayString SIZE(0..17)  

asyncChSwParaConnectProtocol 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.4
Selects the connect protocol for the port being configured. The protocol must be compatible with the attached device.
OBJECT-TYPE    
  INTEGER dedicated(1), dtr(2), autoAnswer(3)  

asyncChSwParaRcvInhibit 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.5
Controls the port being configured from receiving a connection request.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChSwParaResourceClassNumber 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.6
Assigns a resource class number (1 - 64) to the async channel. Zero reflects no resource class assignment.
OBJECT-TYPE    
  INTEGER 0..64  

asyncChSwParaCallInhibit 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.7
Controls the port being configured from making a connection request.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChSwParaUnbalanceRates 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.8
Controls the connections of ports which have dissimilar baud rates (different speed).
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChSwParaCharacterSet 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.9
Option to select either an ASCII or non-ASCII character set.
OBJECT-TYPE    
  INTEGER ascii(1), nonAscii(2)  

asyncChSwParaMatrixSwitching 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.10
The ability of the port to make a connection request by specifying a node/channel number.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

asyncChSwParaChannelPassword 1.3.6.1.4.1.335.1.2.1.3.4.2.2.1.11
A unique password attached to the port being configured to control access for security.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

voice-fax-channel 1.3.6.1.4.1.335.1.2.1.3.4.3
OBJECT IDENTIFIER    

voiceFaxChPhyParaTable 1.3.6.1.4.1.335.1.2.1.3.4.3.1
Table for configuring the voice/Fax channel physical parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    VoiceFaxChPhyParaEntry

voiceFaxChPhyParaEntry 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1
Entry within the table to specify a particular voice/Fax channel number on a specific module/card.
OBJECT-TYPE    
  VoiceFaxChPhyParaEntry  

voiceFaxChPhyParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.1
Identifies the module/card number for the voice/Fax channel specific to the channel's physical parameters.
OBJECT-TYPE    
  INTEGER 2..5  

voiceFaxChPhyParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.2
Identifies the voice/Fax channel specific to the channel's physical parameters.
OBJECT-TYPE    
  INTEGER 1..2  

voiceFaxChPhyParaWireOperation 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.3
Sets the voice channel for either 2-wire or 4-wire analog operation. Valid only when voiceFaxChPhyParaBergStrapType indicates em(2) or enhancedEm(5).
OBJECT-TYPE    
  INTEGER fourWire(1), twoWire(2)  

voiceFaxChPhyParaViewSignallingType 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.4
Indicates the signalling type. This parameter is computed from the strapping and signalling interface configuration.
OBJECT-TYPE    
  INTEGER emTypeIdc(1), emTypeIIdc(2), emTypeIIIdc(3), emTypeIVdc(4), emTypeVdc(5), emTypeI2280(6), emTypeII2280(7), emTypeIII2280(8), emTypeIV2280(9), emTypeV2280(10), emPulsedDc(11), emPulsedIDc(12), emPulsedIIDc(13), emPulsedIIIDc(14), emPulsedIVDc(15), emPulseVDc(16), ktsRepeated(17), ktsInterrupt2by4(18), ktsInterrupt1by2(19), opx(20), fxsRepeated(21), fxsInterrupt2by4(22), fxsInterrupt1by2(23), fxsFaxRepeated(24), fxsFaxInterrupt2by4(25), fxsFaxInterrupt1by2(26), fxo(27), fxsIterrupted(28), faxIterrupted(29)  

voiceFaxChPhyParaBergStrapType 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.5
Indicates the Berg Hardware Strap configuration on the voice/Fax channel.
OBJECT-TYPE    
  INTEGER kts(1), em(2), opx(3), enhancedFxs(4), enhancedEm(5), enhancedFxo(6), standardFxs(7), standardEm(8), standardFxo(9), groundstartFxs(10), groundstartFxo(11), threePort(12)  

voiceFaxChPhyParaSuppression 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.6
During idle periods in which suppression is enabled (=0), the sending voice channel DSP generates suppression service frames containing a noise level estimate and no data. This is sent to the receiving voice channel DSP which will either regenerate the noise level or silence the output depending on the configuration of voiceFaxChPhyParaBackground.
OBJECT-TYPE    
  INTEGER  

voiceFaxChPhyParaCfgSignallingType 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.7
Configures where the ring signal is generated (locally or by remote PBX equipment) and the ring cadence (timing of rings and silence periods). This parameter is ONLY configurable for E&M, Enhanced and Standard E&M, 3-Port Fax, and Enhanced and Standard FXS voice modules. The following is a matrix of valid signaling type options for each configurable voice module, given the Channel Version value (voiceFaxChPhyParaChannelVersion) and Integration Unit software release (sysSoftwarePhase). Voice Module Configurable Options Chan Version Release ------------ -------------------- ------------ ------- E&M emDC,em2280,emPulseDc 2 ALL KTS repeated,interruptOR2by4, 2 ALL interrupt1by2 Std/Enh E&M emDC,em2280,emPulseDC 2,3,5 ALL emDC,em2280,emPulseDC, 6,7 Phase 5.1 emWink and Above 3-Port Fax repeated,interruptOR2by4 3,5-7 ALL Std/Enh FXS repeated,interruptOR2by4, 2,3 ALL interrupt1by2 repeated,interruptOR2by4 5-7 Phase 5.0 and Above
OBJECT-TYPE    
  INTEGER emDc(1), em2280Tone(2), emWink(3), emPulsedDc(4), repeated(5), interruptOR2by4(6), interrupt1by2(7)  

voiceFaxChPhyParaOPXNumberOfRings 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.8
From customer equipment, the number of rings generated before hearing the voice/fax module dial tone of the local Integration unit. This parameter is ONLY configurable for the OPX, and Standard and Enhanced FXO voice modules.
OBJECT-TYPE    
  INTEGER 1..9  

voiceFaxChPhyParaFXOSupervisorDisc 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.9
Configures the means to disconnect a telephone connection. Either an absence of loop current (powerInterrupt) or presence of a call progress tone (tone). Select configuration to match customer equipment provisions. This parameter is ONLY configurable for the Standard and Enhanced FXO voice modules.
OBJECT-TYPE    
  INTEGER powerInterrupt(1), tone(2)  

voiceFaxChPhyParaRingFrequency 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.10
Selects the ringing frequency to be used to indicate an incoming call. This parameter is ONLY configurable for the KTS, 3-Port Fax, and Standard and Enhanced FXS voice modules.
OBJECT-TYPE    
  INTEGER freq25Hz(1), freq50Hz(2)  

voiceFaxChPhyParaJitter 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.11
Maintains continuous voice delivery by compensating (in milliseconds) for the transmission delay of packets. Jitter provides compensation for the difference in arrival time and expected arrival time of voice packets. (Range is 1 - 200 ms.) This parameter is configurable by all voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) equal to '5' or higher and residing in an Integration Unit with a software release (sysSoftwarePhase) of Phase 5.1 and Above (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER  

voiceFaxChPhyParaDTMFRegeneration 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.12
DTMF Regeneration, when enabled, ensures that the DTMF signals at the remote side are regenerated with a uniform on/off time of 100 milliseconds. This option is only compatible with other Voice/Fax modules that configure this parameter. This parameter is configurable by all voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) equal to '7' or higher and residing in an Integration Unit with a software release (sysSoftwarePhase) of Phase 5.1C and Above (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

voiceFaxChPhyParaAutoLevelEnhancement 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.13
Automatic Level Enhancement, when enabled, boosts weak input signals above the noise threshold to a minimum usable level for voice/Fax channels. This parameter is configurable by all voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) equal to '5' or higher and residing in an Integration Unit with a software release (sysSoftwarePhase) of Phase 5.1 and Above (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

voiceFaxChPhyParaBackground 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.14
The ability of passing background noise or silencing the channel by the receiving voice channel DSP during idle periods. First option allows the background noise to be regenerated during the periods, whereas the second option suppresses background noise during idle periods.
OBJECT-TYPE    
  INTEGER regenerated(1), silence(2)  

voiceFaxChPhyParaDigitizingRate 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.15
Configures the compression bandwidth for the voice channel. Larger bandwidths produce crisper voice communications. However, larger voice channel bandwidths may result in overbooking of composite bandwidth. The G.729 Digitizing Rate option (rateG729) is ONLY configurable for voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) equal to '5' or higher (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER rate4000(1), rate4800(2), rate6400(3), rate7200(4), rate8000(5), rate9600(6), rate12000(7), rate14400(8), rate16000(9), rateG729(10)  

voiceFaxChPhyParaBusyMode 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.16
Controls how the busyout state of the channel is determined.
OBJECT-TYPE    
  INTEGER forcedOff(1), forcedOn(2), systemControlled(3)  

voiceFaxChPhyParaVoiceFaxMode 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.17
Selects the channel signal processing type, voice/fax or voice only.
OBJECT-TYPE    
  INTEGER voiceFax(1), voiceOnly(2)  

voiceFaxChPhyParaBandwidthAssignment 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.18
Selects how the channel uses link bandwidth: all the time (continuous); only when voice/fax signals are present (voiceActivated); or dynamically. Option 3 (dynamic) is not valid when the voiceFaxChPhyParaDigitizingRate value is configured for G.729.
OBJECT-TYPE    
  INTEGER voiceActivated(1), continuous(2), dynamic(3)  

voiceFaxChPhyParaInputGain 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.19
Selects one of 29 input level gain values in 1 dB increments. This range of values applies only to the KTS, OPX, and E&M voice modules. The remaining voice modules utilize the following 'value' range: -6 thru 19, inclusive.
OBJECT-TYPE    
  INTEGER -6..22  

voiceFaxChPhyParaChannelType 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.20
Unconfigurable by the User
OBJECT-TYPE    
  INTEGER  

voiceFaxChPhyParaEMTypeStrapping 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.21
Reflects the Ear and Mouth circuit configuration type (I - V) on voice/Fax channels that are strapped for E&M.
OBJECT-TYPE    
  INTEGER emTypeI(1), emTypeII(2), emTypeIII(3), emTypeIV(4), emTypeV(5)  

voiceFaxChPhyParaOutputAttenuation 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.22
Selects one out of 29 output level attenuation values in 1 dB increments. 0 = no attenuation, 28 = maximum attenuation. This range of values applies only to the KTS, OPX, and E&M voice modules. The remaining voice modules utilize the following 'value' range: 0 thru 25, inclusive.
OBJECT-TYPE    
  INTEGER 0..28  

voiceFaxChPhyParaPriority 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.23
Selects the priority of the channel, either high or low.
OBJECT-TYPE    
  INTEGER high(1), low(2)  

voiceFaxChPhyParaFaxDigitizingRate 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.24
Sets the compression bandwidth for voice channel Fax operations.
OBJECT-TYPE    
  INTEGER useVoiceRate(1), rate2400(2), rate4800(3), rate7200(4), rate9600(5)  

voiceFaxChPhyParaLineImpedance 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.25
Provides impedance matching choices for the Enhanced FXS, Enhanced FXO, and Enhanced E&M 2-wire interface modules. This parameter is ONLY configurable for these voice modules. The port impedance of the E&M interface module configured for 4-wire operation is fixed at 600 ohms resistive and is not configurable.
OBJECT-TYPE    
  INTEGER impedance600Ohms(1), complex(2)  

voiceFaxChPhyParaMaxOutputLevel 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.26
Intended to be used for equipment operated outside of U.S.A and Canada. This parameter is ONLY configurable for the Enhanced E&M voice module. Option (1) must be selected within the U.S.A (or Canada) if this module was originally configured for 4-wire operation and you have just reconfigured it to 2-wire operation. Otherwise, the voice/fax module will not operate properly.
OBJECT-TYPE    
  INTEGER level0dBmNominal(1), levelPlus7dBm(2)  

voiceFaxChPhyParaRegenerationDelay 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.27
The selected delay, ranging from 1 to 15 seconds, compensates for the time it takes for the remote PBX to go off-hook and provide a dial tone to the voice channel for completing the call setup. The default is 1 second. This parameter is configurable for all voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) greater than or equal to '3' (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER 1..15  

voiceFaxChPhyParaMaxDialDigitTimeLimit 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.28
The dial digit time limit is the maximum time allowed for accepting dialed digits. When the dial digit time limit is reached, further digits are not accepted, and the accumulated digits are compared to the configured number of digits. If the accumulated number is less than the configured number, a fast busy response is generated. If the accumulated number is equal to or more than the configured number, the digits are forwarded. The default is 10 seconds. This parameter is configurable for all voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) greater than or equal to '3' (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER 1..15  

voiceFaxChPhyParaMaxNumFwdDigits 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.29
The selected value specifies the maximum number of dialing digits to be forwarded to the destination voice channel without having to wait until the dial digit time limit is reached. The range is 0-16, with zero disabling the store and forward feature. The default value is 0. This parameter is configurable for all voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) greater than or equal to '3' (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER 0..16  

voiceFaxChPhyParaCallProgressionTones 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.30
This option allows you to match the call progress to those of one of eight countries or areas. This parameter is configurable for all voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) greater than or equal to '3' (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER northAmerica(1), japan(2), unitedKingdom(3), germany(4), france(5), centralAmerica(6), chile(7), australia(8)  

voiceFaxChPhyParaRegenFormat 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.31
Regeneration format supports the store and forward function. Dial format allows the voice/fax channel to match the outgoing dialing digits format with the format of the interfacing PBX. This parameter is configurable for all voice modules with a Channel Version (voiceFaxChPhyParaChannelVersion) greater than or equal to '3' (EXCLUDES the E&M, KTS and OPX voice modules).
OBJECT-TYPE    
  INTEGER pulsedDialing(1), dtmfDialing(2)  

voiceFaxChPhyParaChannelVersion 1.3.6.1.4.1.335.1.2.1.3.4.3.1.1.32
Identifies the voice/Fax compression algorithm used (installed software version) by the voice/Fax channel.
OBJECT-TYPE    
  INTEGER phase1and2and2dot5Fconn(1), phase3VSW(2), phase3dot1UV(3), voiceDialingImprovement(4), g729DigitizingRateSupported(5), phase5dot1(6), dtmfRegne(7), casVer2(8)  

voiceFaxChSwParaTable 1.3.6.1.4.1.335.1.2.1.3.4.3.2
Table for configuring the voice/Fax channel switching parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    VoiceFaxChSwParaEntry

voiceFaxChSwParaEntry 1.3.6.1.4.1.335.1.2.1.3.4.3.2.1
Entry within the table to specify a particular voice/Fax channel number on a specific module/card for channel switching configuration.
OBJECT-TYPE    
  VoiceFaxChSwParaEntry  

voiceFaxChSwParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.4.3.2.1.1
Identifies the module/card number for the voice/Fax channel specific to the channel's switching parameters.
OBJECT-TYPE    
  INTEGER 1..5  

voiceFaxChSwParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.4.3.2.1.2
Identifies the voice/Fax channel specific to the channel's switching parameters.
OBJECT-TYPE    
  INTEGER 1..6  

voiceFaxChSwParaVoiceExtension 1.3.6.1.4.1.335.1.2.1.3.4.3.2.1.3
Defines the voice extension for the voice/fax channel. The voice extension must consist of NUMERIC characters only; and the number of digits in the extension MUST match the value set for the voiceFaxChSwNumberOfDigitsInPhoneNumber parameter.
OBJECT-TYPE    
  DisplayString SIZE(1..4)  

voiceFaxChSwParaFaxExtension 1.3.6.1.4.1.335.1.2.1.3.4.3.2.1.4
Defines the fax extension for the voice/fax channel. The fax extension must consist of NUMERIC characters only; and the number of digits in the extension MUST match the value set for the voiceFaxChSwNumberOfDigitsInPhoneNumber parameter. This parameter is ONLY valid for 3-Port Fax modules.
OBJECT-TYPE    
  DisplayString SIZE(1..4)  

voiceFaxChSwParaAutoCallNumber 1.3.6.1.4.1.335.1.2.1.3.4.3.2.1.5
This is the extension number of a voice/fax port that is called immediately if this voice/fax port goes off hook. If no entry is made in this field, this function is disabled. The Auto Call Number must consist of NUMERIC characters only.
OBJECT-TYPE    
  DisplayString SIZE(1..4)  

voiceFaxChSwParaReceiveInhibit 1.3.6.1.4.1.335.1.2.1.3.4.3.2.1.6
Option (1) prevents this voice/fax channel from receiving calls. The default is Option (2).
OBJECT-TYPE    
  INTEGER on(1), off(2)  

voiceFaxChSwParaCallInhibit 1.3.6.1.4.1.335.1.2.1.3.4.3.2.1.7
Option (1) prevents this voice/fax channel from initiating calls. The default is Option (2).
OBJECT-TYPE    
  INTEGER on(1), off(2)  

voiceFaxChSwNumberOfDigitsInPhoneNumber 1.3.6.1.4.1.335.1.2.1.3.4.3.3
Number of digits in a phone number (1 - 4). Note that all Integration units in a network must have the same value for this parameter.
OBJECT-TYPE    
  INTEGER 1..4  

digital-voice-channel 1.3.6.1.4.1.335.1.2.1.3.4.4
OBJECT IDENTIFIER    

digitalVoiceChPhyParaTable 1.3.6.1.4.1.335.1.2.1.3.4.4.1
Table for configuring digital voice module (DVM) physical parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    DigitalVoiceChPhyParaEntry

digitalVoiceChPhyParaEntry 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1
Entry within the table to specify a particular DVM channel number on a specific module/card.
OBJECT-TYPE    
  DigitalVoiceChPhyParaEntry  

digitalVoiceChPhyParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.1
Identifies the module/card number for the DVM channel specific to the channel's physical parameters.
OBJECT-TYPE    
  INTEGER 2..5  

digitalVoiceChPhyParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.2
Identifies the DVM channel specific to the channel's physical parameters.
OBJECT-TYPE    
  INTEGER 1..12  

digitalVoiceChPhyParaViewSignallingType 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.3
Indicates the DVM signalling type. Note that Options 3, 5, 6, and 7 are only valid for E1 interfaces.
OBJECT-TYPE    
  INTEGER tieTrunk(1), transparent(2), dc5bInvert(3), tieInvert(4), dc5b(5), casVers01(6), r2byQdot421(7)  

digitalVoiceChPhyParaBergStrapType 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.4
Indicates the Berg Hardware Strap configuration which is a constant value for DVM channels.
OBJECT-TYPE    
  INTEGER digitalVoiceModule(1)  

digitalVoiceChPhyParaPortEmulation 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.5
Indicates the DVM port emulation. Note that Options 3, 5, 6, and 7 are only valid for E1 interfaces. Options 3, 6, and 7 are only configurable for DVMs with a Channel Version of '6' or greater, and which are running in a CCM software release environment of Phase 5.1 or greater.
OBJECT-TYPE    
  INTEGER tieTrunk(1), tieInvert(2), dc5bInvert(3), transparent(4), dc5b(5), casVers01(6), r2byQdot421(7)  

digitalVoiceChPhyParaSuppression 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.6
During idle periods in which suppression is enabled (=0), the sending DVM channel DSP generates suppression service frames containing a noise level estimate and no data. This is sent to the receiving DVM channel DSP which will either regenerate the noise level or silence the output depending on the configuration of digitalVoiceChPhyParaBackground.
OBJECT-TYPE    
  INTEGER  

digitalVoiceChPhyParaJitter 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.7
Maintains continuous voice delivery by compensating (in milliseconds) for the transmission delay of packets. Jitter provides compensation for the difference in arrival time and expected arrival time of DVM packets. (Range is 1 - 200 ms.). This parameter is configurable for DVMs with a Channel Version (voiceFaxChPhyParaChannelVersion) equal to '6' or higher, and residing in an Integration Unit with a software release (sysSoftwarePhase) of Phase 5.1 or Above.
OBJECT-TYPE    
  INTEGER  

digitalVoiceChPhyParaDTMFRegeneration 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.8
DTMF Regeneration, when enabled, ensures that the DTMF signals at the remote side are regenerated with a uniform on/off time of 100 milliseconds. This option is only compatible with other Voice/Fax modules that configure this parameter. This parameter is configurable DVMs with a Channel Version (voiceFaxChPhyParaChannelVersion) of '7' or greater and residing in an Integration Unit with a software release (sysSoftwarePhase) of Phase 5.1C and Above.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

digitalVoiceChPhyParaAutoGainControl 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.9
Automatic Gain Control, when enabled, boosts weak input signals above the noise threshold to a minimum usable level for DVM channels.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

digitalVoiceChPhyParaBackground 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.10
The ability of passing background noise or silencing the channel by the receiving DVM channel DSP during idle periods. First option allows the background noise to be regenerated during the periods, whereas the second option suppresses background noise during idle periods.
OBJECT-TYPE    
  INTEGER regenerated(1), silence(2)  

digitalVoiceChPhyParaDigitizingRate 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.11
Configures the compression bandwidth for the DVM channel. Larger bandwidths produce crisper voice communications. However, larger DVM channel bandwidths may result in overbooking of composite bandwidth. The G.729 Digitizing Rate option (rateG729) is ONLY configurable for DVMs with a Channel Version (voiceFaxChPhyParaChannelVersion) of '5' or greater.
OBJECT-TYPE    
  INTEGER rate4000(1), rate4800(2), rate6400(3), rate7200(4), rate8000(5), rate9600(6), rate12000(7), rate14400(8), rate16000(9), rateG729(10)  

digitalVoiceChPhyParaBusyMode 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.12
Controls how the busyout state of the DVM channel is determined.
OBJECT-TYPE    
  INTEGER forcedOff(1), forcedOn(2), systemControlled(3)  

digitalVoiceChPhyParaVoiceFaxMode 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.13
Selects the DVM channel signal processing type, voice/fax or voice only.
OBJECT-TYPE    
  INTEGER voiceFax(1), voiceOnly(2)  

digitalVoiceChPhyParaBandwidthAssignment 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.14
Selects how the DVM channel uses link bandwidth: all the time (continuous);only when voice/fax signals are present (voiceActivated); or dynamically. Option 3 not valid for G.729 value of digitalVoiceChPhyParaDigitizingRate.
OBJECT-TYPE    
  INTEGER voiceActivated(1), continuous(2), dynamic(3)  

digitalVoiceChPhyParaInputGain 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.15
Selects one of 15 input level gain values in 1 dB increments. The range is from -6 to 8, inclusive.
OBJECT-TYPE    
  INTEGER -6..8  

digitalVoiceChPhyParaChannelType 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.16
Unconfigurable by the User
OBJECT-TYPE    
  INTEGER  

digitalVoiceChPhyParaOutputAttenuation 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.17
Selects one out of 9 DVM output level attenuation values in 1 dB increments. The range is 0 - 8, where =0 is no attenuation and =8 is maximum attenuation.
OBJECT-TYPE    
  INTEGER 0..8  

digitalVoiceChPhyParaPriority 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.18
Selects the priority of the DVM channel, either high or low.
OBJECT-TYPE    
  INTEGER high(1), low(2)  

digitalVoiceChPhyParaFaxDigitizingRate 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.19
Sets the compression bandwidth for DVM channel Fax operations.
OBJECT-TYPE    
  INTEGER useVoiceRate(1), rate2400(2), rate4800(3), rate7200(4), rate9600(5)  

digitalVoiceChPhyParaRegenerationDelay 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.20
The selected delay, ranging from 1 to 15 seconds, compensates for the time it takes for the remote PBX to go off-hook and provide a dial tone to the DVM channel for completing the call setup. The default is 1 second.
OBJECT-TYPE    
  INTEGER 1..15  

digitalVoiceChPhyParaMaxDialDigitTimeLimit 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.21
The DVM dial digit time limit is the maximum time allowed for accepting dialed digits. When the dial digit time limit is reached, further digits are not accepted, and the accumulated digits are compared to the configured number of digits. If the accumulated number is less than the configured number, a fast busy response is generated. If the accumulated number is equal to or more than the configred number, the digits are forwarded. The default is 10 seconds.
OBJECT-TYPE    
  INTEGER 1..15  

digitalVoiceChPhyParaMaxNumFwdDigits 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.22
The selected value specifies the maximum number of dialing digits to be forwarded by the DVM to the destination voice channel without having to wait until the DVM dial digit time limit is reached. The range is 0-16, with zero disabling the store and forward feature. The default value is 0.
OBJECT-TYPE    
  INTEGER 0..16  

digitalVoiceChPhyParaCallProgressionTones 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.23
This option allows you to match the DVM channel call progress to those of one of eight countries or areas.
OBJECT-TYPE    
  INTEGER northAmerica(1), japan(2), unitedKingdom(3), germany(4), france(5), centralAmerica(6), chile(7), australia(8)  

digitalVoiceChPhyParaRegenerationFormat 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.24
DVM regeneration format supports the store and forward function. Designed for E&M and FXO interfaces, regeneration format allows the DVM channel to match the outgoing dialing digits format with the format of the interfacing PBX.
OBJECT-TYPE    
  INTEGER pulsedDialing(1), dtmfDialing(2)  

digitalVoiceChPhyParaCompander 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.25
Option (1), uLaw, should be selected as the standard t1 compander format. Option (2), aLaw, should be selected as the standard e1 compander format. Note that there is a rare mismatch to t1 equipment that uses an aLaw compander format.
OBJECT-TYPE    
  INTEGER uLaw(1), aLaw(2)  

digitalVoiceChPhyParaPremiumVoice 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.26
Option (2) allows transparent pass-through of uncompressed voice frames between DVM ports. This option is used when two Integration unit voice ports may connect through the same PBX. Option (1) is used for normal operation in which calls always terminate in a telephone set. This parameter is configurable for DVMs with a Channel Version (voiceFaxChPhyParaChannelVersion) equal to '5' or higher.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

digitalVoiceChPhyParaModuleIdentification 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.27
Identifies whether the DVM interfaces with a t1 vs. an e1 card.
OBJECT-TYPE    
  INTEGER t1(1), e1(2), invalid(3)  

digitalVoiceChPhyParaChannelVersion 1.3.6.1.4.1.335.1.2.1.3.4.4.1.1.28
Identifies the compression algorithm used (installed software version) by the DVM channel.
OBJECT-TYPE    
  INTEGER digitalVoiceModule(1), g729DigitizingRateSupported(2), phase5dot1(3), dtmfRegne(4), casVer2(5)  

digitalVoiceChSwParaTable 1.3.6.1.4.1.335.1.2.1.3.4.4.2
Table for configuring the DVM channel switching parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    DigitalVoiceChSwParaEntry

digitalVoiceChSwParaEntry 1.3.6.1.4.1.335.1.2.1.3.4.4.2.1
Entry within the table to specify a particular DVM channel number on a specific module/card for channel switching configuration.
OBJECT-TYPE    
  DigitalVoiceChSwParaEntry  

digitalVoiceChSwParaCardNumber 1.3.6.1.4.1.335.1.2.1.3.4.4.2.1.1
Identifies the module/card number for the DVM channel specific to the channel's switching parameters.
OBJECT-TYPE    
  INTEGER 2..5  

digitalVoiceChSwParaChannelNumber 1.3.6.1.4.1.335.1.2.1.3.4.4.2.1.2
Identifies the DVM channel specific to the channel's switching parameters.
OBJECT-TYPE    
  INTEGER 1..12  

digitalVoiceChSwParaVoiceExtension 1.3.6.1.4.1.335.1.2.1.3.4.4.2.1.3
Defines the voice extension for the DVM channel. The voice extension must consist of NUMERIC characters only.
OBJECT-TYPE    
  DisplayString SIZE(0..4)  

digitalVoiceChSwParaAutoCallNumber 1.3.6.1.4.1.335.1.2.1.3.4.4.2.1.4
This is the extension number of a voice/fax port that is called immediately if this DVM channel goes 'off hook'. If no entry is made in this field, this function is disabled. The Auto Call Number must consist of NUMERIC characters only.
OBJECT-TYPE    
  DisplayString SIZE(0..4)  

digitalVoiceChSwParaReceiveInhibit 1.3.6.1.4.1.335.1.2.1.3.4.4.2.1.5
Option (1) prevents this DVM channel from receiving calls. The default is Option (2).
OBJECT-TYPE    
  INTEGER on(1), off(2)  

digitalVoiceChSwParaCallInhibit 1.3.6.1.4.1.335.1.2.1.3.4.4.2.1.6
Option (1) prevents this DVM channel from initiating calls. The default is Option (2).
OBJECT-TYPE    
  INTEGER on(1), off(2)  



muxLinkCfgTable 1.3.6.1.4.1.335.1.2.1.3.5.1.1
Table for configuring the clocking for a Mux Feeder link.
OBJECT-TYPE    
  SEQUENCE OF  
    MuxLinkCfgEntry

muxLinkCfgEntry 1.3.6.1.4.1.335.1.2.1.3.5.1.1.1
Entry within the table to specify a particular Mux link port number on a specific module/card.
OBJECT-TYPE    
  MuxLinkCfgEntry  

muxLinkCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.1.1.1.1
Identifies the module/card number specific to a particular Mux link port.
OBJECT-TYPE    
  INTEGER 1..5  

muxLinkCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.1.1.1.2
Identifies the specific Mux Link port number specific to the link's clocking configuration.
OBJECT-TYPE    
  INTEGER 1..6  

muxLinkCfgDataRate 1.3.6.1.4.1.335.1.2.1.3.5.1.1.1.3
Sets the type of clocking to be used on the mux link to be configured. Note: When the value of this parameter is changed the link must be reset.
OBJECT-TYPE    
  INTEGER external(1), rate2400Sync(2), rate4800Sync(3), rate9600Sync(4), rate12000Sync(5), rate14400Sync(6), rate16800Sync(7), rate19200Sync(8), rate9600Async(9), rate1800Async(10), rate1200Async(11)  

muxOrLEsiPreConfigTable 1.3.6.1.4.1.335.1.2.1.3.5.1.2
Table to pre-configure the data rate of a Mux or Local ESI (LIL) Link prior to configuring the port as a Mux or LIL link. By using this table to 'preset' the data rate, only 1 node reset is needed following the port link assignment to complete the configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    MuxOrLEsiPreConfigEntry

muxOrLEsiPreConfigEntry 1.3.6.1.4.1.335.1.2.1.3.5.1.2.1
Entry within the table to specify a particular port for Mux or LIL pre-configuration on a specific module/card.
OBJECT-TYPE    
  MuxOrLEsiPreConfigEntry  

muxOrLEsiPreConfigCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.1.2.1.1
Identifies the module/card for Mux or LIL link pre-configuration.
OBJECT-TYPE    
  INTEGER 1..5  

muxOrLEsiPreConfigChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.1.2.1.2
Identifies the port number for Mux or LIL link pre-configuration.
OBJECT-TYPE    
  INTEGER 1..6  

muxOrLEsiPreConfigDataRate 1.3.6.1.4.1.335.1.2.1.3.5.1.2.1.3
Sets the data rate in bits per second for Mux and LIL link pre-configurations.
OBJECT-TYPE    
  INTEGER muxOrLEsiExternal(1), muxRate2400Sync(2), muxRate4800Sync(3), muxRate9600Sync(4), muxRate12000Sync(5), muxRate14400Sync(6), muxRate16800Sync(7), muxRate19200Sync(8), muxRate9600Async(9), muxRate1800Async(10), muxRate1200Async(11), lEsiRate64000(12), lEsiRate126000(13), lEsiRate192000(14), lEsiRate252000(15)  


esiLinkCfgTable 1.3.6.1.4.1.335.1.2.1.3.5.2.1
Table for configuring the data rate of an ESI (aka Interconnect) link.
OBJECT-TYPE    
  SEQUENCE OF  
    EsiLinkCfgEntry

esiLinkCfgEntry 1.3.6.1.4.1.335.1.2.1.3.5.2.1.1
Entry into the table pertaining to a specific ESI link on a specific module/card.
OBJECT-TYPE    
  EsiLinkCfgEntry  

esiLinkCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.2.1.1.1
Identifies the module/card number specific to the ESI link for data rate configuration.
OBJECT-TYPE    
  INTEGER 1..5  

esiLinkCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.2.1.1.2
Identifies the ESI link port specific to the data rate configuration.
OBJECT-TYPE    
  INTEGER 1..6  

esiLinkCfgDataRate 1.3.6.1.4.1.335.1.2.1.3.5.2.1.1.3
Sets the link clocking method to external, or if internal, the data rate. Note: When the value of this parameter is changed, the link must be reset.
OBJECT-TYPE    
  INTEGER external(1), rate2400Sync(2), rate4800Sync(3), rate9600Sync(4), rate12000Sync(5), rate14400Sync(6), rate16800Sync(7), rate19200Sync(8), rate38400Sync(9), rate56000Sync(10), rate64000Sync(11)  

esiOrSecLinkPreConfigTable 1.3.6.1.4.1.335.1.2.1.3.5.2.2
Table to pre-configure the data rate of an ESI (aka Interconnect) Link (or secondary link) prior to configuring the link port. By using this table to 'preset' the data rate, only 1 node reset is needed following the port link assignment to complete the configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    EsiOrSecLinkPreConfigEntry

esiOrSecLinkPreConfigEntry 1.3.6.1.4.1.335.1.2.1.3.5.2.2.1
Entry within the table to specify a particular port for ESI or secondary link pre-configuration on a specific module/card.
OBJECT-TYPE    
  EsiOrSecLinkPreConfigEntry  

esiOrSecLinkPreConfigCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.2.2.1.1
Identifies the module/card for ESI or secondary link pre-configuration.
OBJECT-TYPE    
  INTEGER 1..5  

esiOrSecLinkPreConfigChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.2.2.1.2
Identifies the port number for ESI or secondary link pre-configuration.
OBJECT-TYPE    
  INTEGER 1..6  

esiOrSecLinkPreConfigDataRate 1.3.6.1.4.1.335.1.2.1.3.5.2.2.1.3
Sets the data rate in bits per second for ESI and secondary link pre-configurations. Note: The only valid data rate value for Secondary links is 'external (1)'. (Secondary links exclusively use external clocking.)
OBJECT-TYPE    
  INTEGER external(1), rate2400Sync(2), rate4800Sync(3), rate9600Sync(4), rate12000Sync(5), rate14400Sync(6), rate16800Sync(7), rate19200Sync(8), rate38400Sync(9), rate56000Sync(10), rate64000Sync(11)  

esiOrSecLinkAssignCfgTable 1.3.6.1.4.1.335.1.2.1.3.5.2.3
Table for configuring the activation and deactivation of ESI (aka Interconnect) and secondary links.
OBJECT-TYPE    
  SEQUENCE OF  
    EsiOrSecLinkAssignCfgEntry

esiOrSecLinkAssignCfgEntry 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1
Entry into the table pertaining to a specific ESI or secondary link for activation/deactivation configuration on a specific module/card.
OBJECT-TYPE    
  EsiOrSecLinkAssignCfgEntry  

esiOrSecLinkAssignCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.1
Identifies the module/card number specific to the ESI or secondary link for activation/deactivation configuration.
OBJECT-TYPE    
  INTEGER  

esiOrSecLinkAssignCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.2
Identifies the ESI or secondary link port specific to the activation/deactivation configuration.
OBJECT-TYPE    
  INTEGER  

esiOrSecLinkAssignCfgLinkForcedOn 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.3
Both the primary and secondary links can be configured as Forced On. This overrides the current time of day and utilization restrictions for testing, or to provide bandwidth during a normally off period without changing other configuration. The default is YES for primary links and NO for secondary links.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

esiOrSecLinkAssignCfgSecLinkBackUpOnly 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.4
If the primary or secondary link is configured to be off, according to the time of day configuration, then the secondary link will not be activated upon primary link. The default value, Yes, indicates the secondary link is for backup only.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

esiOrSecLinkAssignCfgUtilThresholdToActivateSec 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.5
This option allows utilization thresholds to be set for activation of the secondary link. Utilization thresholds are specified as a percentage of available bandwidth on the primary link. Secondary channels may be configured to become active when the bandwidth utilization on the primary link exceeds a predetermined threshold. The secondary link will also be activated if primary link failure is detected. However, the secondary link will not be activated if either the secondary or primary link is configured to be off according to the time of day configuration. The default value is 75.
OBJECT-TYPE    
  INTEGER 1..99  

esiOrSecLinkAssignCfgUtilThresholdToDeactivateSec 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.6
This option allow utilization thresholds to be set for deactivation of the secondary link. The secondary link will be de-activated when the total utilization drops below a configured threshold. The de-activation threshold value must be less than the activation threshold value. The default value is 50.
OBJECT-TYPE    
  INTEGER 1..99  

esiOrSecLinkAssignCfgTimeThresholdExceedToActivateSec 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.7
Time (in minutes) that utilization threshold (to activate) must be exceeded to activate a secondary link. The default value is 5.
OBJECT-TYPE    
  INTEGER 1..40  

esiOrSecLinkAssignCfgTimeThresholdBelowToDeactivateSec 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.8
Time (in minutes) that utilization threshold (to deactivate) must be below to deactivate a secondary link. The default value is 5.
OBJECT-TYPE    
  INTEGER 1..40  

esiOrSecLinkAssignCfgTerminateCallonDeactivation 1.3.6.1.4.1.335.1.2.1.3.5.2.3.1.9
This parameter allows the option of leaving a link up if a switched voice call is in place even if the time of day configuration indicates it is time to deactivate the link. Setting this parameter to NO will bring down the link only when all switched voice calls have hung up. The default is NO.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

esiOrSecLinkTODActivationTable 1.3.6.1.4.1.335.1.2.1.3.5.2.4
Table for configuring the Time Of Day (TOD) activation and deactivation schedule of ESI (aka Interconnect) and secondary links.
OBJECT-TYPE    
  SEQUENCE OF  
    EsiOrSecLinkTODActivationEntry

esiOrSecLinkTODActivationEntry 1.3.6.1.4.1.335.1.2.1.3.5.2.4.1
Entry into the table pertaining to a specific module/card, port location, day schedule, and time schedule for setting ESI or secondary link activation/deactivation configurations.
OBJECT-TYPE    
  EsiOrSecLinkTODActivationEntry  

esiOrSecLinkTODActivationCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.2.4.1.1
Identifies the module/card number specific to an ESI or secondary link for the TOD activation/deactivation schedule.
OBJECT-TYPE    
  INTEGER  

esiOrSecLinkTODActivationChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.2.4.1.2
Identifies the port location specific to an ESI or secondary link for the TOD activation/deactivation schedule.
OBJECT-TYPE    
  INTEGER  

esiOrSecLinkTODActivationSetSchedule 1.3.6.1.4.1.335.1.2.1.3.5.2.4.1.3
Identifies the particular day(s) schedule specific to an ESI or secondary link for the TOD activation/deactivation schedule.
OBJECT-TYPE    
  INTEGER sunday(1), weekdays(2), saturday(3)  

esiOrSecLinkTODActivationTenMinInterval 1.3.6.1.4.1.335.1.2.1.3.5.2.4.1.4
Identifies the particular time of day (in 10 minute intervals) specific to an ESI or secondary link for the TOD activation/deactivation schedule.
OBJECT-TYPE    
  INTEGER 1..144  

esiOrSecLinkTODActivationLinkState 1.3.6.1.4.1.335.1.2.1.3.5.2.4.1.5
Sets the TOD link state for an ESI or secondary link. This parameter is used to configure a link to active (on) or not active (off) for a particular 10 minute interval as specified by the previous 4 indexing parameters contained in this table.
OBJECT-TYPE    
  INTEGER off(1), on(2)  


x21LinkCfgTable 1.3.6.1.4.1.335.1.2.1.3.5.3.1
Table to configure the X.21 links. It defines the X.21 parameters for the Integration unit and for the MICOM mux side.
OBJECT-TYPE    
  SEQUENCE OF  
    X21LinkCfgEntry

x21LinkCfgEntry 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1
Entry in the table for a particular X.21 link. Note that a link reset is required if any value in this table is changed.
OBJECT-TYPE    
  X21LinkCfgEntry  

x21LinkCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1.1
The card/module number of the X.21 link channel the entry pertains to.
OBJECT-TYPE    
  INTEGER  

x21LinkCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1.2
The particular X.21 link channel on specific module to be configured.
OBJECT-TYPE    
  INTEGER  

x21LinkCfgLocalConnectMode 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1.3
Configures the Integration unit side of the X.21 link. In Integration units, the only connect mode for X.21 links is data activity connect. In this mode, the Integration unit will place a call over the X.21 network whenever data activity is detected on any force connected channel, matrix connection, or port connected to a class defined with ports on a MICOM mux attached to an X.21 link.
OBJECT-TYPE    
  INTEGER dataActivityConnect(1), dtrConnect(2)  

x21LinkCfgRemoteConnectMode 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1.4
Configures the MICOM mux side of the X.21 link. There are two options: DTR and Data Activity Connect. DTR (DTR connect) establishes the X.21 connection whenever DTR is raised on any terminal connected to the MICOM mux. Data Activity Connect establishes the X.21 connection whenever data activity is detected on any terminal connected to the MICOM mux.
OBJECT-TYPE    
  INTEGER dataActivityConnect(1), dtrConnect(2)  

x21LinkCfgLocalConnectTimeout 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1.5
The value in this field specifies the amount of time that if no data activity is detected, the X.21 connection will be dropped. The default is 5 seconds.
OBJECT-TYPE    
  INTEGER 0..20  

x21LinkCfgRemoteConnectTimeout 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1.6
If data activity connect mode is selected for the remote MICOM mux, this field specifies the amount of time that if no data activity is detected on any of the MICOM mux's channels, the X.21 connection will be dropped. The default is 5 seconds.
OBJECT-TYPE    
  INTEGER 0..20  

x21LinkCfgLocalConnectRetries 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1.7
Configures the number of attempts the Integration unit will make to place a call over the X.21 network.
OBJECT-TYPE    
  INTEGER 1..64  

x21LinkCfgRemoteConnectRetries 1.3.6.1.4.1.335.1.2.1.3.5.3.1.1.8
Configures the number of attempts the MICOM mux will make to place a call over the X.21 network.
OBJECT-TYPE    
  INTEGER 1..64  

x21LinkPreConfigTable 1.3.6.1.4.1.335.1.2.1.3.5.3.2
Table to configure an X.21 link prior to configuring a port as an X.21 link. By using this table to 'preset' the X.21 link parameters, only 1 node reset is needed following the X.21 assignment to complete the configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    X21LinkPreConfigEntry

x21LinkPreConfigEntry 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1
Entry within the table to specify a particular port number for pre-configuration of an X.21 link on a specific module/card.
OBJECT-TYPE    
  X21LinkPreConfigEntry  

x21LinkPreConfigCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1.1
The card/module number of the X.21 link channel to be pre-configured.
OBJECT-TYPE    
  INTEGER 1..5  

x21LinkPreConfigChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1.2
The particular X.21 link channel on specific module to be pre-configured.
OBJECT-TYPE    
  INTEGER 1..6  

x21LinkPreConfigLocalConnectMode 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1.3
Pre-configures the Integration unit side of the X.21 link. In Integration units, the only connect mode for X.21 links is data activity connect. In this mode, the Integration unit will place a call over the X.21 network whenever data activity is detected on any force connected channel, matrix connection, or port connected to a class defined with ports on a MICOM mux attached to an X.21 link.
OBJECT-TYPE    
  INTEGER dataActivityConnect(1), dtrConnect(2)  

x21LinkPreConfigRemoteConnectMode 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1.4
Pre-configures the MICOM mux side of the X.21 link. There are two options: DTR and Data Activity Connect. DTR (DTR connect) establishes the X.21 connection whenever DTR is raised on any terminal connected to the MICOM mux. Data Activity Connect establishes the X.21 connection whenever data activity is detected on any terminal connected to the MICOM mux.
OBJECT-TYPE    
  INTEGER dataActivityConnect(1), dtrConnect(2)  

x21LinkPreConfigLocalConnectTimeout 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1.5
Pre-configuration of this field specifies the amount of time that if no data activity is detected, the X.21 connection will be dropped.
OBJECT-TYPE    
  INTEGER 0..20  

x21LinkPreConfigRemoteConnectTimeout 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1.6
If data activity connect mode is selected for the remote MICOM mux, pre-configuration of this field specifies the amount of time that if no data activity is detected on any of the MICOM mux's channels, the X.21 connection will be dropped.
OBJECT-TYPE    
  INTEGER 0..20  

x21LinkPreConfigLocalConnectRetries 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1.7
Pre-configures the number of attempts the Integration unit will make to place a call over the X.21 network.
OBJECT-TYPE    
  INTEGER 1..64  

x21LinkPreConfigRemoteConnectRetries 1.3.6.1.4.1.335.1.2.1.3.5.3.2.1.8
Pre-configures the number of attempts the MICOM mux will make to place a call over the X.21 network.
OBJECT-TYPE    
  INTEGER 1..64  


localESILinkCfgTable 1.3.6.1.4.1.335.1.2.1.3.5.4.1
Table to configure the data rate for a local ESI link (aka Local Interconnect Link or LIL).
OBJECT-TYPE    
  SEQUENCE OF  
    LocalESILinkCfgEntry

localESILinkCfgEntry 1.3.6.1.4.1.335.1.2.1.3.5.4.1.1
Entry within the table to specify a particular port number on a specific module/card for an LIL configuration.
OBJECT-TYPE    
  LocalESILinkCfgEntry  

localESILinkCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.4.1.1.1
Identifies the specific module/card number for an LIL configuration.
OBJECT-TYPE    
  INTEGER 1..5  

localESILinkCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.4.1.1.2
Identifies the specific port number for an LIL configuration.
OBJECT-TYPE    
  INTEGER 1..6  

localESILinkCfgDataRate 1.3.6.1.4.1.335.1.2.1.3.5.4.1.1.3
Sets the link clocking method to external, or if internal, the data rate for an LIL. Note: When the value of this parameter is changed, the link must be reset.
OBJECT-TYPE    
  INTEGER external(1), rate64000(2), rate126000(3), rate192000(4), rate252000(5)  


esiSecLinkCfgTable 1.3.6.1.4.1.335.1.2.1.3.5.5.1
Table to configure the data rate for a secondary ESI link.
OBJECT-TYPE    
  SEQUENCE OF  
    EsiSecLinkCfgEntry

esiSecLinkCfgEntry 1.3.6.1.4.1.335.1.2.1.3.5.5.1.1
Entry within the table to specify a particular port number on a specific module/card for a secondary ESI link configuration.
OBJECT-TYPE    
  EsiSecLinkCfgEntry  

esiSecLinkCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.5.1.1.1
Identifies the specific module/card number for a secondary ESI link configuration.
OBJECT-TYPE    
  INTEGER 1..5  

esiSecLinkCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.5.1.1.2
Identifies the specific port number for a secondary ESI link configuration.
OBJECT-TYPE    
  INTEGER 1..6  

esiSecLinkCfgDataRate 1.3.6.1.4.1.335.1.2.1.3.5.5.1.1.3
Sets the link clocking method to external, or if internal, the data rate for a secondary ESI link. Note: When the value of this parameter is changed, the link must be reset.
OBJECT-TYPE    
  INTEGER external(1), rate2400Sync(2), rate4800Sync(3), rate9600Sync(4), rate12000Sync(5), rate14400Sync(6), rate16800Sync(7), rate19200Sync(8), rate38400Sync(9), rate56000Sync(10), rate64000Sync(11)  

esiSecLinkAssignmentTable 1.3.6.1.4.1.335.1.2.1.3.5.5.2
Table to assign a secondary link channel to a primary ESI link.
OBJECT-TYPE    
  SEQUENCE OF  
    EsiSecLinkAssignmentEntry

esiSecLinkAssignmentEntry 1.3.6.1.4.1.335.1.2.1.3.5.5.2.1
Entry within the table to specify a particular link/port on a specific module/card for a secondary assignment to a primary link.
OBJECT-TYPE    
  EsiSecLinkAssignmentEntry  

esiSecLinkAssignmentSecCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.5.2.1.1
Identifies the specific module/card number of the link to be assigned as the secondary link.
OBJECT-TYPE    
  INTEGER  

esiSecLinkAssignmentSecChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.5.2.1.2
Identifies the specific link/port number of the link to be assigned as the secondary link.
OBJECT-TYPE    
  INTEGER  

esiSecLinkAssignmentEntryAction 1.3.6.1.4.1.335.1.2.1.3.5.5.2.1.3
This is the command to perform the secondary link assignment. Selecting 'active' following the successful setting of esiSecLinkAssignmentPriCardNumber & esiSecLinkAssignmentPriChannelNumber will complete the assignment.
OBJECT-TYPE    
  INTEGER active(1)  

esiSecLinkAssignmentPriCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.5.2.1.4
Indicates the card number where the primary link channel is residing. A GET value of FFh indicates that no secondary link assignment currently exists. A SET with a value of zero (0) with zero (0) as the channel number de-assigns the link.
OBJECT-TYPE    
  INTEGER  

esiSecLinkAssignmentPriChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.5.2.1.5
Indicates the channel number where the primary channel is residing. A read value of FFh indicates that no secondary link assignment currently exists. A SET with a value of zero (0) with zero (0) as the card number de-assigns the link.
OBJECT-TYPE    
  INTEGER  


frameRelayLinkCfgTable 1.3.6.1.4.1.335.1.2.1.3.5.6.1
Table to configure a Frame Relay link.
OBJECT-TYPE    
  SEQUENCE OF  
    FrameRelayLinkEntry

frameRelayLinkCfgEntry 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1
Entry within the table to specify a particular port number on a specific module/card for a Frame Relay link configuration.
OBJECT-TYPE    
  FrameRelayLinkEntry  

frameRelayLinkCfgCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.1
Identifies the specific module/card number for a Frame Relay link configuration.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkCfgChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.2
Identifies the specific port number for a Frame Relay link configuration.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkCfgDataRate 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.3
Sets the data rate for a Frame Relay link. Note: If the frame relay access link is externally clocked, no configuration of this paramter is necessary.
OBJECT-TYPE    
  INTEGER rate9600(1), rate19200(2), rate64000(3), rate126000(4), rate126400(5), rate128000(6), rate189500(7), rate192000(8), rate246400(9), rate252000(10), rate256000(11), rate308000(12), rate310200(13), rate336000(14), rate366500(15), rate379100(16), rate384000(17), rate448000(18), rate492800(19), rate504000(20), rate537600(21)  

frameRelayLinkCfgLocalMgmtProtocol 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.4
Sets the frame relay access link local management protocol.
OBJECT-TYPE    
  INTEGER none(1), annexD(2), lmi(3)  

frameRelayLinkCfgFullStatusPollingCounter 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.5
Sets the frame relay access link full status poll counter.
OBJECT-TYPE    
  INTEGER 1..255  

frameRelayLinkCfgErrorThreshold 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.6
Sets the frame relay access link error threshold.
OBJECT-TYPE    
  INTEGER 1..10  

frameRelayLinkCfgEventCount 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.7
Sets the frame relay access link monitored events count.
OBJECT-TYPE    
  INTEGER 1..10  

frameRelayLinkCfgLinkIntegrityVerificationTimer 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.8
Sets the frame relay access link integrity verification timer.
OBJECT-TYPE    
  INTEGER 5..30  

frameRelayLinkCfgPollingVerificationTimer 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.9
Sets the frame relay access link polling verification timer.
OBJECT-TYPE    
  INTEGER 5..30  

frameRelayLinkCfgMaxFrameSize 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.10
Sets the maximum frame relay access link frame size. The numbers are in octets.
OBJECT-TYPE    
  INTEGER 5..8189  

frameRelayLinkCfgRxClockingSource 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.11
Sets the port clocking configuration for receiving data over the frame relay access link.
OBJECT-TYPE    
  INTEGER external(1), internal(2)  

frameRelayLinkCfgTxClockingSource 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.12
Sets the port clocking configuration for transmitting data over the frame relay access link.
OBJECT-TYPE    
  INTEGER external(1), internal(2)  

frameRelayLinkCfgNetworkAddress 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.13
Sets the network address for the frame relay access link. This address is assigned by the carrier provider based on a standardized numbering scheme.
OBJECT-TYPE    
  OCTET STRING SIZE(0..16)  

frameRelayLinkCfgAccessLinkMode 1.3.6.1.4.1.335.1.2.1.3.5.6.1.1.14
Sets the access mode for the frame relay access link.
OBJECT-TYPE    
  INTEGER userEquipmentMode(1), networkMode(2)  

frameRelayLinkCfgDLCITable 1.3.6.1.4.1.335.1.2.1.3.5.6.2
Table to configure the DLCI bandwidth charactistics for a frame relay link.
OBJECT-TYPE    
  SEQUENCE OF  
    FrameRelayLinkCfgDLCIEntry

frameRelayLinkCfgDLCIEntry 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1
Entry within the table to specify a DLCI number, the FR link/port number, and the module/card number for setting DLCI bandwidth characteristics.
OBJECT-TYPE    
  FrameRelayLinkCfgDLCIEntry  

frameRelayLinkCfgDLCICardNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.1
Identifies the module/card number for a particular DLCI of a specific FR link for setting DLCI bandwidth characteristics.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkCfgDLCIChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.2
Identifies the FR link/port number of a particular DLCI channel for setting the bandwidth characteristics.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkCfgDLCINumber 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.3
Identifies a particular DLCI number for setting the bandwidth characteristics.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkCfgDLCIType 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.4
Identifies the DLCI type configuration. Note that only Options (3), (5), and (6) are expected.
OBJECT-TYPE    
  INTEGER undefined(1), annexDType(2), virtualLink(3), lmi(4), transparent(5), fragmentation(6)  

frameRelayLinkCfgDLCICommittedInfoRateForward 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.5
Sets the value for committed information rate forward. This value is available from your frame relay service provider.
OBJECT-TYPE    
  INTEGER 0..9999999  

frameRelayLinkCfgDLCICommittedInfoRateBackward 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.6
Sets the value for committed information rate backward. This value is available from your frame relay service provider.
OBJECT-TYPE    
  INTEGER 0..9999999  

frameRelayLinkCfgDLCICommittedBurstSizeForward 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.7
Sets the value for committed burst size backward. This value is available from your frame relay service provider.
OBJECT-TYPE    
  INTEGER 0..9999999  

frameRelayLinkCfgDLCICommittedBurstSizeBackward 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.8
Sets the value for committed burst size forward. This value is available from your frame relay service provider.
OBJECT-TYPE    
  INTEGER 0..9999999  

frameRelayLinkCfgDLCIExcessBurstSizeForward 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.9
Sets the value for excess burst size backward. This value is available from your frame relay service provider. Note: should be equal to the FR access data rate minus the CIR backward.
OBJECT-TYPE    
  INTEGER 0..9999999  

frameRelayLinkCfgDLCIExcessBurstSizeBackward 1.3.6.1.4.1.335.1.2.1.3.5.6.2.1.10
Sets the value for excess burst size forward. This value is available from your frame relay service provider. Note: should be equal to the FR access data rate minus the CIR forward.
OBJECT-TYPE    
  INTEGER 0..9999999  

frameRelayLinkControlTable 1.3.6.1.4.1.335.1.2.1.3.5.6.3
Table to add or delete DLCI channels for a FR link.
OBJECT-TYPE    
  SEQUENCE OF  
    FrameRelayLinkControlEntry

frameRelayLinkControlEntry 1.3.6.1.4.1.335.1.2.1.3.5.6.3.1
Entry within the table to specify a particular DLCI number for addition/deletion to a particular FR access link on a specific module/card.
OBJECT-TYPE    
  FrameRelayLinkControlEntry  

frameRelayLinkControlLinkCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.3.1.1
Identifies the module/card number of a FR access link for adding/deleting a DLCI channel.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkControlLinkChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.3.1.2
Identifies a FR access link/port number for adding/deleting a DLCI channel.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkControlDLCINumber 1.3.6.1.4.1.335.1.2.1.3.5.6.3.1.3
Sets the DLCI channel number to be added or deleted.
OBJECT-TYPE    
  INTEGER 16..991  

frameRelayLinkControlCommand 1.3.6.1.4.1.335.1.2.1.3.5.6.3.1.4
Command to select whether the DLCI number specified in frameRelayLinkControlDLCINumber is to be added or deleted. This command sould be sent ater the DLCI type has been sent.
OBJECT-TYPE    
  INTEGER addDLCI(1), deleteDLCI(2)  

frameRelayLinkControlDLCIType 1.3.6.1.4.1.335.1.2.1.3.5.6.3.1.5
Sets the type of DLCI channel that is being added. This object should be set before the previous command object is set.
OBJECT-TYPE    
  INTEGER virtualLink(1), transparent(2), fragmentation(3)  

frameRelayDLCIControlTable 1.3.6.1.4.1.335.1.2.1.3.5.6.4
Table to configure force connections from one DLCI channel on a FR access link to another FR access link DLCI channel. Note: This will connect 2 FR access links together on a single Integration unit which acts like a FR switch.
OBJECT-TYPE    
  SEQUENCE OF  
    FrameRelayDLCIControlEntry

frameRelayDLCIControlEntry 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1
Entry within the table specifying a particular DLCI channel, a FR access link/port number, and module/card number for a force connection configuration.
OBJECT-TYPE    
  FrameRelayDLCIControlEntry  

frameRelayDLCIControlLinkCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1.1
Identifies the module/card number of the source FR access link for force connection configuration.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIControlLinkChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1.2
Identifies the port/channel number of the source FR access link for force connection configuration.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIControlDLCINumber 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1.3
Identifies the DLCI channel number of the source FR access link for force connection configuration.
OBJECT-TYPE    
  INTEGER 16..991  

frameRelayDLCIControlCommand 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1.4
Selects the force connection configuration between 2 FR access links on a single Integration unit.
OBJECT-TYPE    
  INTEGER connectDLCI(1), disconnectDLCI(2)  

frameRelayDLCIControlFconnNodeName 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1.5
Selects the name of the Integration unit for the FR link force connection configuration.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

frameRelayDLCIControlFconnCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1.6
Selects the module/card number of the destination FR access link for force connection configuration.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIControlFconnChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1.7
Selects the port/channel number of the destination FR access link for force connection configuration.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIControlFconnDLCINumber 1.3.6.1.4.1.335.1.2.1.3.5.6.4.1.8
Selects the DLCI channel number of the destination FR access link for force connection configuration.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIConnectsTable 1.3.6.1.4.1.335.1.2.1.3.5.6.5
Table to view DLCI connections between FR access links.
OBJECT-TYPE    
  SEQUENCE OF  
    FrameRelayDLCIConnectsEntry

frameRelayDLCIConnectsEntry 1.3.6.1.4.1.335.1.2.1.3.5.6.5.1
Entry within the table specific to the FR access link module/card number, the port/channel number, and DLCI channel number for viewing DLCI connections.
OBJECT-TYPE    
  FrameRelayDLCIConnectsEntry  

frameRelayDLCIConnectsLinkCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.5.1.1
Identifies the module/card number of the source FR access link to view connection configurations.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIConnectsLinkChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.5.1.2
Identifies the port/channel number of the source FR access link to view connection configurations.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIConnectsDLCIConnected 1.3.6.1.4.1.335.1.2.1.3.5.6.5.1.3
Identifies the DLCI channel number of the source FR access link to view connection configurations.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIConnectsDestCardNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.5.1.4
Identifies the module/card number of the destination FR access link to view connection configurations.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIConnectsDestChannelNumber 1.3.6.1.4.1.335.1.2.1.3.5.6.5.1.5
Identifies the port/channel number of the destination FR access link to view connection configurations.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIConnectsDestDLCINumber 1.3.6.1.4.1.335.1.2.1.3.5.6.5.1.6
Identifies the DLCI channel number of the destination FR access link to view connection configurations.
OBJECT-TYPE    
  INTEGER  

interface 1.3.6.1.4.1.335.1.2.1.3.6
OBJECT IDENTIFIER    

t1-interface 1.3.6.1.4.1.335.1.2.1.3.6.1
OBJECT IDENTIFIER    

t1DS1InterfaceTable 1.3.6.1.4.1.335.1.2.1.3.6.1.1
Table for Network T1 Interface for long-haul connection to the telephone network.
OBJECT-TYPE    
  SEQUENCE OF  
    T1DS1InterfaceEntry

t1DS1InterfaceEntry 1.3.6.1.4.1.335.1.2.1.3.6.1.1.1
Entry within the table for specified (Network Interface) DSO (1..24) channels.
OBJECT-TYPE    
  T1DS1InterfaceEntry  

t1DS1InterfaceDS0Index 1.3.6.1.4.1.335.1.2.1.3.6.1.1.1.1
Indicates an instance into the table for a particular (1..24) DSO channel.
OBJECT-TYPE    
  INTEGER 1..24  

t1DS1InterfaceConnectionState 1.3.6.1.4.1.335.1.2.1.3.6.1.1.1.2
Defines the connection state of the specified DSO channel. This defines the ability for data passed directly between the Local and Network Interfaces, or for being dropped and inserted to/from the Integration unit resources (CCM links, Data Ports, Voice Channels).
OBJECT-TYPE    
  INTEGER idle(1), bypassVoice(2), bypassData(3), toCCMLinkA1(4), toCCMLinkA2(5), toCCMLinkA3(6), toCCMLinkA4(7), toCCMLinkA5(8), toCCMLinkA6(9), toDataPort1(10), toDataPort2(11), toVChOnT1DVM1(12), toVChOnT1DVM2(13), toVChOnT1DVM3(14), toVChOnT1DVM4(15), toVChOnT1DVM5(16), toVChOnT1DVM6(17), toVChOnSlotCDVM1(18), toVChOnSlotCDVM2(19), toVChOnSlotCDVM3(20), toVChOnSlotCDVM4(21), toVChOnSlotCDVM5(22), toVChOnSlotCDVM6(23), toVChOnSlotCDVM7(24), toVChOnSlotCDVM8(25), toVChOnSlotCDVM9(26), toVChOnSlotCDVM10(27), toVChOnSlotCDVM11(28), toVChOnSlotCDVM12(29), toVChOnSlotDDVM1(30), toVChOnSlotDDVM2(31), toVChOnSlotDDVM3(32), toVChOnSlotDDVM4(33), toVChOnSlotDDVM5(34), toVChOnSlotDDVM6(35), toVChOnSlotDDVM7(36), toVChOnSlotDDVM8(37), toVChOnSlotDDVM9(38), toVChOnSlotDDVM10(39), toVChOnSlotDDVM11(40), toVChOnSlotDDVM12(41)  

t1DSX1InterfaceTable 1.3.6.1.4.1.335.1.2.1.3.6.1.2
Table for Local T1 Interface for connection to local digital pbx.
OBJECT-TYPE    
  SEQUENCE OF  
    T1DSX1InterfaceEntry

t1DSX1InterfaceEntry 1.3.6.1.4.1.335.1.2.1.3.6.1.2.1
Entry within the table for specified (local interface) DSO (1..24) channels.
OBJECT-TYPE    
  T1DSX1InterfaceEntry  

t1DSX1InterfaceDS0Index 1.3.6.1.4.1.335.1.2.1.3.6.1.2.1.1
Indicates an instance into the table for a particular (1..24) DSO channel for local t1 interfaces.
OBJECT-TYPE    
  INTEGER 1..24  

t1DSX1InterfaceConnectionState 1.3.6.1.4.1.335.1.2.1.3.6.1.2.1.2
For local t1 interfaces, this parameter defines the connection state of the specified DSO channel. This defines the ability for data passed directly between the Local and Network Interfaces, or for being dropped and inserted to/from the Integration unit resources (CCM links, Data Ports, Voice Channels).
OBJECT-TYPE    
  INTEGER idle(1), bypassVoice(2), bypassData(3), toCCMLinkA1(4), toCCMLinkA2(5), toCCMLinkA3(6), toCCMLinkA4(7), toCCMLinkA5(8), toCCMLinkA6(9), toDataPort1(10), toDataPort2(11), toVChOnT1DVM1(12), toVChOnT1DVM2(13), toVChOnT1DVM3(14), toVChOnT1DVM4(15), toVChOnT1DVM5(16), toVChOnT1DVM6(17), toVChOnSlotCDVM1(18), toVChOnSlotCDVM2(19), toVChOnSlotCDVM3(20), toVChOnSlotCDVM4(21), toVChOnSlotCDVM5(22), toVChOnSlotCDVM6(23), toVChOnSlotCDVM7(24), toVChOnSlotCDVM8(25), toVChOnSlotCDVM9(26), toVChOnSlotCDVM10(27), toVChOnSlotCDVM11(28), toVChOnSlotCDVM12(29), toVChOnSlotDDVM1(30), toVChOnSlotDDVM2(31), toVChOnSlotDDVM3(32), toVChOnSlotDDVM4(33), toVChOnSlotDDVM5(34), toVChOnSlotDDVM6(35), toVChOnSlotDDVM7(36), toVChOnSlotDDVM8(37), toVChOnSlotDDVM9(38), toVChOnSlotDDVM10(39), toVChOnSlotDDVM11(40), toVChOnSlotDDVM12(41)  

t1CfgGroup 1.3.6.1.4.1.335.1.2.1.3.6.1.3
OBJECT IDENTIFIER    

t1CfgDSX1FrameFormat 1.3.6.1.4.1.335.1.2.1.3.6.1.3.1
Configures the local T1 interface frame formats to either (SF) super frame or (ESF) extended super frame.
OBJECT-TYPE    
  INTEGER superFrame(1), extendedSuperFrame(2)  

t1CfgDSX1LineCode 1.3.6.1.4.1.335.1.2.1.3.6.1.3.2
Configures the line coding method (at the Local interface) either to Alternate Mark Inversion (AMI) coding or Bipolar Eight Zero Suppression (B8ZS). In AMI 0's are indicated by the absence of a pulse, and 1's are indicated by either a positive or negative polarity pulse. In B8ZS an all 0 byte is replaced by a special code of 00011011 which indicate two fixed bipolar code violations. On remote end these violations are ignored and the data is retrieved.
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2)  

t1CfgDSX1IdleCode 1.3.6.1.4.1.335.1.2.1.3.6.1.3.3
Configures the idle code character at the local T1 interface.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

t1CfgDSX1lineBuildout 1.3.6.1.4.1.335.1.2.1.3.6.1.3.4
Configures a transmitter attenuation parameter based on various cable lengths, reflecting the distance from the T1 Access Module to the T1 service provider.
OBJECT-TYPE    
  INTEGER lessThan110Feet(1), lessThan220Feet(2), lessThan330Feet(3), lessThan440Feet(4), externalLBO(5), greaterThan665Feet(6), lessThan550Feet(7), lessThan660Feet(8)  

t1CfgDSX1NetworkInvokedLoopback 1.3.6.1.4.1.335.1.2.1.3.6.1.3.5
Enables/Disables the DSX1 Network-invoked loopback on the T1 module.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

t1CfgDS1FrameFormat 1.3.6.1.4.1.335.1.2.1.3.6.1.3.6
Configures the network T1 interface frame formats to either (SF) super frame or (ESF) extended super frame.
OBJECT-TYPE    
  INTEGER superFrame(1), extendedSuperFrame(2)  

t1CfgDS1LineCode 1.3.6.1.4.1.335.1.2.1.3.6.1.3.7
Configures the line coding method (at the Network interface) either to Alternate Mark Inversion (AMI) coding or Bipolar Eight Zero Suppression (B8ZS). In AMI 0's are indicated by the absence of a pulse, and 1's are indicated by either a positive or negative polarity pulse. In B8ZS an all 0 byte is replaced by a special code of 00011011 which indicate two fixed bipolar code violations. On remote end these violations are ignored and the data is retrieved.
OBJECT-TYPE    
  INTEGER ami(1), b8zs(2)  

t1CfgDS1IdleCode 1.3.6.1.4.1.335.1.2.1.3.6.1.3.8
Configures the idle code character at the network T1 interface.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

t1CfgDS1NetworkInvokedLoopback 1.3.6.1.4.1.335.1.2.1.3.6.1.3.9
Enables/Disables the DS1 Network-invoked loopback on the T1 module.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

t1CfgDataPort1Rate 1.3.6.1.4.1.335.1.2.1.3.6.1.3.10
Sets the base rate of Data Port channel 1 on the T1 module. The actual rate will be determined by the following formula: rate of the data port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

t1CfgDataPort1Timing 1.3.6.1.4.1.335.1.2.1.3.6.1.3.11
Sets how the clocking will be supplied for Data Port 1 on the T1 module.
OBJECT-TYPE    
  INTEGER internallySuppliedNormal(1), tailCircuit(2)  

t1CfgDataPort1DTRControl 1.3.6.1.4.1.335.1.2.1.3.6.1.3.12
Sets the DTR control for Data Port 1 on the T1 module. Option (1), dtrNormal, will configure DTR control from the DTE equipment. Option (2), dtrForced, will force DTR to a '1'.
OBJECT-TYPE    
  INTEGER dtrNormal(1), dtrForced(2)  

t1CfgDataPort1RTSControl 1.3.6.1.4.1.335.1.2.1.3.6.1.3.13
Sets the RTS control for Data Port 1 on the T1 module. Option (1), rtsNormal, will configure RTS control from the DTE equipment. Option (2), rtsForced, will force RTS to a '1'.
OBJECT-TYPE    
  INTEGER rtsNormal(1), rtsForced(2)  

t1CfgDataPort2Rate 1.3.6.1.4.1.335.1.2.1.3.6.1.3.14
Sets the base rate of Data Port channel 2 on the T1 module. The actual rate will be determined by the following formula: rate of the data port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

t1CfgDataPort2Timing 1.3.6.1.4.1.335.1.2.1.3.6.1.3.15
Sets how the clocking will be supplied for Data Port 2 on the T1 module.
OBJECT-TYPE    
  INTEGER internallySupplied(1), tailCircuit(2)  

t1CfgDataPort2DTRControl 1.3.6.1.4.1.335.1.2.1.3.6.1.3.16
Sets the DTR control for Data Port 2 on the T1 module. Option (1), dtr, will configure DTR control from the DTE equipment. Option (2), dtrForcedOn, will force DTR to a '1'.
OBJECT-TYPE    
  INTEGER dtr(1), dtrForcedOn(2)  

t1CfgDataPort2RTSControl 1.3.6.1.4.1.335.1.2.1.3.6.1.3.17
Sets the RTS control for Data Port 2 on the T1 module. Option (1), rts, will configure RTS control from the DTE equipment. Option (2), rtsForcedOn, will force RTS to a '1'.
OBJECT-TYPE    
  INTEGER rts(1), rtsForcedOn(2)  

t1CfgCCMLinkA1Rate 1.3.6.1.4.1.335.1.2.1.3.6.1.3.18
Sets the base rate of the CCM A1 channel for a T1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

t1CfgCCMLinkA2Rate 1.3.6.1.4.1.335.1.2.1.3.6.1.3.19
Sets the base rate of the CCM A2 channel for a T1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

t1CfgCCMLinkA3Rate 1.3.6.1.4.1.335.1.2.1.3.6.1.3.20
Sets the base rate of the CCM A3 channel for a T1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

t1CfgCCMLinkA4Rate 1.3.6.1.4.1.335.1.2.1.3.6.1.3.21
Sets the base rate of the CCM A4 channel for a T1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

t1CfgCCMLinkA5Rate 1.3.6.1.4.1.335.1.2.1.3.6.1.3.22
Sets the base rate of the CCM A5 channel for a T1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

t1CfgCCMLinkA6Rate 1.3.6.1.4.1.335.1.2.1.3.6.1.3.23
Sets the base rate of the CCM A6 channel for a T1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

t1CfgSystemClockSource 1.3.6.1.4.1.335.1.2.1.3.6.1.3.24
Configures the source of the clock used in the T1 Access Module. Options include: - DSX-1. The clock source is from the DSX-1 interface. - DS-1. The clock source is from the DS-1 interface. - Internal. The clock is derived from a clock source internal to the T1 Access Module.
OBJECT-TYPE    
  INTEGER ds1ClockDerived(1), dsx1Clockderived(2), internalClocking(3)  

t1CfgDS1Config 1.3.6.1.4.1.335.1.2.1.3.6.1.3.25
This object is a write only object that will signal the proxy to start caching changes to the DS1 ds0 connection tables. This is done to solve an anomaly in the marathon/t1 design. The manager must set this object to init before updating any of the t1DS1InterfaceTable objects. When all the changes have been set then this object will have to be set to commit (2). The init will cause the proxy to upload the table from the marathon and the commit will cause the proxy to send all the changes to the marathon.
OBJECT-TYPE    
  INTEGER init(1), commit(2)  

t1CfgDSX1Config 1.3.6.1.4.1.335.1.2.1.3.6.1.3.26
This object is a write only object that will signal the proxy to start caching changes to the DSX1 ds0 connection tables. This is done to solve an anomaly in the marathon/t1 design. The manager must set this object to init before updating any of the t1DSX1InterfaceTable objects. When all the changes have been set then this object will have to be set to commit (2). The init will cause the proxy to upload the table from the marathon and the commit will cause the proxy to send all the changes to the marathon.
OBJECT-TYPE    
  INTEGER init(1), commit(2)  

t1FlashControlTable 1.3.6.1.4.1.335.1.2.1.3.6.1.4
Table to control (erase) T1 flash memory in preparation for a code download.
OBJECT-TYPE    
  SEQUENCE OF  
    T1FlashControlEntry

t1FlashControlEntry 1.3.6.1.4.1.335.1.2.1.3.6.1.4.1
Entry within the table specific to a particular T1 module/card number for flash memory control.
OBJECT-TYPE    
  T1FlashControlEntry  

t1FlashControlCardNumber 1.3.6.1.4.1.335.1.2.1.3.6.1.4.1.1
Identifies the T1 module/card number for flash memory control.
OBJECT-TYPE    
  INTEGER 2..5  

t1FlashControlCommand 1.3.6.1.4.1.335.1.2.1.3.6.1.4.1.2
Controls the T1 module flash memory in preparation of a code download. Perform a SET with the value eraseCardFlash to erase the flash memory prior to downloading new T1 flash software.
OBJECT-TYPE    
  INTEGER eraseCardFlash(1)  

t1FlashControlFlashStatus 1.3.6.1.4.1.335.1.2.1.3.6.1.4.1.3
Identifies the status of the T1 module/card flash memory.
OBJECT-TYPE    
  INTEGER bootImageCorrupt(1), t1FlashImageValid(2), t1FlashErased(3), t1FlashImageInvalid(4), securityViolation(5), eraseAborted(6)  

e1-interface 1.3.6.1.4.1.335.1.2.1.3.6.2
OBJECT IDENTIFIER    

e1L1InterfaceTable 1.3.6.1.4.1.335.1.2.1.3.6.2.1
Table to configure the DS0 connections for the L1 interface of an E1 module/card.
OBJECT-TYPE    
  SEQUENCE OF  
    E1L1InterfaceEntry

e1L1InterfaceEntry 1.3.6.1.4.1.335.1.2.1.3.6.2.1.1
Entry within the table specific to a particular DS0 channel for the L1 interface of an E1 module/card.
OBJECT-TYPE    
  E1L1InterfaceEntry  

e1L1InterfaceDS0Index 1.3.6.1.4.1.335.1.2.1.3.6.2.1.1.1
Identifies the DS0 channel of the E1 module for configuration of the L1 interface.
OBJECT-TYPE    
  INTEGER 1..30  

e1L1InterfaceConnectionState 1.3.6.1.4.1.335.1.2.1.3.6.2.1.1.2
Select the DS0 connection for DS0 configuration of the L1 interface. Available DS0 connections include Idle, Bypass, CCM A1-A6, Data Port 1-2, Voice B1-B6 (on e1 card), Voice C1-C12, and Voice D1-D12.
OBJECT-TYPE    
  INTEGER idle(1), bypass(2), toCCMLinkA1(3), toCCMLinkA2(4), toCCMLinkA3(5), toCCMLinkA4(6), toCCMLinkA5(7), toCCMLinkA6(8), toDataPort1(9), toDataPort2(10), toVChOnE1DVM1(11), toVChOnE1DVM2(12), toVChOnE1DVM3(13), toVChOnE1DVM4(14), toVChOnE1DVM5(15), toVChOnE1DVM6(16), toVChOnSlotCDVM1(17), toVChOnSlotCDVM2(18), toVChOnSlotCDVM3(19), toVChOnSlotCDVM4(20), toVChOnSlotCDVM5(21), toVChOnSlotCDVM6(22), toVChOnSlotCDVM7(23), toVChOnSlotCDVM8(24), toVChOnSlotCDVM9(25), toVChOnSlotCDVM10(26), toVChOnSlotCDVM11(27), toVChOnSlotCDVM12(28), toVChOnSlotDDVM1(29), toVChOnSlotDDVM2(30), toVChOnSlotDDVM3(31), toVChOnSlotDDVM4(32), toVChOnSlotDDVM5(33), toVChOnSlotDDVM6(34), toVChOnSlotDDVM7(35), toVChOnSlotDDVM8(36), toVChOnSlotDDVM9(37), toVChOnSlotDDVM10(38), toVChOnSlotDDVM11(39), toVChOnSlotDDVM12(40)  

e1L2InterfaceTable 1.3.6.1.4.1.335.1.2.1.3.6.2.2
Table to configure the DS0 connections for the L2 interface of an E1 module/card.
OBJECT-TYPE    
  SEQUENCE OF  
    E1L2InterfaceEntry

e1L2InterfaceEntry 1.3.6.1.4.1.335.1.2.1.3.6.2.2.1
Entry within the table specific to a particular DS0 channel for the L2 interface of an E1 module/card.
OBJECT-TYPE    
  E1L2InterfaceEntry  

e1L2InterfaceDS0Index 1.3.6.1.4.1.335.1.2.1.3.6.2.2.1.1
Identifies the DS0 channel of the E1 module for configuration of the L2 interface.
OBJECT-TYPE    
  INTEGER 1..30  

e1L2InterfaceConnectionState 1.3.6.1.4.1.335.1.2.1.3.6.2.2.1.2
Select the DS0 connection for DS0 configuration of the L2 interface. Available DS0 connections include Idle, Bypass, CCM A1-A6, Data Port 1-2, Voice B1-B6 (on e1 card), Voice C1-C12, and Voice D1-D12.
OBJECT-TYPE    
  INTEGER idle(1), bypass(2), toCCMLinkA1(3), toCCMLinkA2(4), toCCMLinkA3(5), toCCMLinkA4(6), toCCMLinkA5(7), toCCMLinkA6(8), toDataPort1(9), toDataPort2(10), toVChOnE1DVM1(11), toVChOnE1DVM2(12), toVChOnE1DVM3(13), toVChOnE1DVM4(14), toVChOnE1DVM5(15), toVChOnE1DVM6(16), toVChOnSlotCDVM1(17), toVChOnSlotCDVM2(18), toVChOnSlotCDVM3(19), toVChOnSlotCDVM4(20), toVChOnSlotCDVM5(21), toVChOnSlotCDVM6(22), toVChOnSlotCDVM7(23), toVChOnSlotCDVM8(24), toVChOnSlotCDVM9(25), toVChOnSlotCDVM10(26), toVChOnSlotCDVM11(27), toVChOnSlotCDVM12(28), toVChOnSlotDDVM1(29), toVChOnSlotDDVM2(30), toVChOnSlotDDVM3(31), toVChOnSlotDDVM4(32), toVChOnSlotDDVM5(33), toVChOnSlotDDVM6(34), toVChOnSlotDDVM7(35), toVChOnSlotDDVM8(36), toVChOnSlotDDVM9(37), toVChOnSlotDDVM10(38), toVChOnSlotDDVM11(39), toVChOnSlotDDVM12(40)  

e1CfgGroup 1.3.6.1.4.1.335.1.2.1.3.6.2.3
OBJECT IDENTIFIER    

e1CfgL1LineCode 1.3.6.1.4.1.335.1.2.1.3.6.2.3.1
Configures the L1 interface line coding method of the E1 module/card either to Alternate Mark Inversion (AMI) coding or High Density Bipolar 3 (HDB3). AMI indicates that HDB3 zeros suppression is not enabled. To obtain zeros suppression (bit stuffing method) with AMI, you must also set the base rate of the CCM and Data ports to 56Kbps. Otherwise, zeros suppression will be the responsibility of the Data Terminal Equipment. HDB3 does not allow more than three consecutive zeros. HDB3 format can be enabled only when supported by the connecting equipment or the E1 service provider.
OBJECT-TYPE    
  INTEGER ami(1), hdb3(2)  

e1CfgL1IdleCode 1.3.6.1.4.1.335.1.2.1.3.6.2.3.2
Configures the idle code character of the L1 interface for E1 module/card.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

e1CfgL1SignallingMode 1.3.6.1.4.1.335.1.2.1.3.6.2.3.3
Configures the signalling mode of the L1 interface for E1 module/card.
OBJECT-TYPE    
  INTEGER cas(1), transparentIdle(2), transparentTS16ToA2(3), transparentTS16ToA3(4), transparentTS16ToA4(5), transparentTS16ToA5(6), transparentTS16ToA6(7), transparentTS16ToDP1(8), transparentTS16ToDP2(9), casTS16Bypass(10), ccsTS16Bypass(11)  

e1CfgL2LineCode 1.3.6.1.4.1.335.1.2.1.3.6.2.3.4
Configures the L2 interface line coding method of the E1 module/card either to Alternate Mark Inversion (AMI) coding or High Density Bipolar 3 (HDB3). AMI indicates that HDB3 zeros suppression is not enabled. To obtain zeros suppression (bit stuffing method) with AMI, you must also set the base rate of the CCM and Data ports to 56Kbps. Otherwise, zeros suppression will be the responsibility of the Data Terminal Equipment. HDB3 does not allow more than three consecutive zeros. HDB3 format can be enabled only when supported by the connecting equipment or the E1 service provider.
OBJECT-TYPE    
  INTEGER ami(1), hdb3(2)  

e1CfgL2IdleCode 1.3.6.1.4.1.335.1.2.1.3.6.2.3.5
Configures the idle code character of the L2 interface for E1 module/card.
OBJECT-TYPE    
  OCTET STRING SIZE(1)  

e1CfgL2SignallingMode 1.3.6.1.4.1.335.1.2.1.3.6.2.3.6
Configures the signalling mode of the L2 interface for E1 module/card.
OBJECT-TYPE    
  INTEGER cas(1), transparentIdle(2), transparentTS16ToA2(3), transparentTS16ToA3(4), transparentTS16ToA4(5), transparentTS16ToA5(6), transparentTS16ToA6(7), transparentTS16ToDP1(8), transparentTS16ToDP2(9), casTS16Bypass(10), ccsTS16Bypass(11)  

e1CfgDataPort1BaseRate 1.3.6.1.4.1.335.1.2.1.3.6.2.3.7
Sets the base rate of Data Port channel 1 on the E1 module. The actual rate will be determined by the following formula: rate of the data port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

e1CfgDataPort1Timing 1.3.6.1.4.1.335.1.2.1.3.6.2.3.8
Sets how the clocking will be supplied for Data Port 1 on the E1 module.
OBJECT-TYPE    
  INTEGER normal(1), tailCircuit(2)  

e1CfgDataPort1DTRControl 1.3.6.1.4.1.335.1.2.1.3.6.2.3.9
Sets the DTR control for Data Port 1 on the E1 module. Option (1), dtrNormal, will configure DTR control from the DTE equipment. Option (2), dtrForced, will force DTR to a '1'.
OBJECT-TYPE    
  INTEGER dtrNormal(1), dtrForced(2)  

e1CfgDataPort1RTSControl 1.3.6.1.4.1.335.1.2.1.3.6.2.3.10
Sets the RTS control for Data Port 1 on the E1 module. Option (1), rtsNormal, will configure RTS control from the DTE equipment. Option (2), rtsForced, will force RTS to a '1'.
OBJECT-TYPE    
  INTEGER rtsNormal(1), rtsForced(2)  

e1CfgDataPort2BaseRate 1.3.6.1.4.1.335.1.2.1.3.6.2.3.11
Sets the base rate of Data Port channel 2 on the E1 module. The actual rate will be determined by the following formula: rate of the data port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

e1CfgDataPort2Timing 1.3.6.1.4.1.335.1.2.1.3.6.2.3.12
Sets how the clocking will be supplied for Data Port 2 on the E1 module.
OBJECT-TYPE    
  INTEGER normal(1), tailCircuit(2)  

e1CfgDataPort2DTRControl 1.3.6.1.4.1.335.1.2.1.3.6.2.3.13
Sets the DTR control for Data Port 2 on the E1 module. Option (1), dtrNormal, will configure DTR control from the DTE equipment. Option (2), dtrForced, will force DTR to a '1'.
OBJECT-TYPE    
  INTEGER dtrNormal(1), dtrForced(2)  

e1CfgDataPort2RTSControl 1.3.6.1.4.1.335.1.2.1.3.6.2.3.14
Sets the RTS control for Data Port 2 on the E1 module. Option (1), rtsNormal, will configure RTS control from the DTE equipment. Option (2), rtsForced, will force RTS to a '1'.
OBJECT-TYPE    
  INTEGER rtsNormal(1), rtsForced(2)  

e1CfgCCMLinkA1Rate 1.3.6.1.4.1.335.1.2.1.3.6.2.3.15
Sets the base rate of the CCM A1 channel for an E1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels).
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

e1CfgCCMLinkA2Rate 1.3.6.1.4.1.335.1.2.1.3.6.2.3.16
Sets the base rate of the CCM A2 channel for an E1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels.
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

e1CfgCCMLinkA3Rate 1.3.6.1.4.1.335.1.2.1.3.6.2.3.17
Sets the base rate of the CCM A3 channel for an E1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels.
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

e1CfgCCMLinkA4Rate 1.3.6.1.4.1.335.1.2.1.3.6.2.3.18
Sets the base rate of the CCM A4 channel for an E1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels.
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

e1CfgCCMLinkA5Rate 1.3.6.1.4.1.335.1.2.1.3.6.2.3.19
Sets the base rate of the CCM A5 channel for an E1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels.
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

e1CfgCCMLinkA6Rate 1.3.6.1.4.1.335.1.2.1.3.6.2.3.20
Sets the base rate of the CCM A6 channel for an E1 interface. The actual rate will be determined by the following formula: rate of the CCM port = (base rate)*(number of DS0 channels.
OBJECT-TYPE    
  INTEGER multipleOf64kbps(1), multipleOf56kbps(2)  

e1CfgSystemClockSource 1.3.6.1.4.1.335.1.2.1.3.6.2.3.21
Configures the source of the clock used in the E1 Access Module. Options include: - clockDerivedL1. The clock source is from the L1 interface. - clockDerivedL2. The clock source is from the L2 interface. - internalClocking. The clock is derived from a clock source internal to the E1 Access Module.
OBJECT-TYPE    
  INTEGER clockDerivedL1(1), clockDerivedL2(2), internalClocking(3)  

e1CfgL1Crc4 1.3.6.1.4.1.335.1.2.1.3.6.2.3.22
Enables/Disables the CRC-4 mode for the L1 interface on the E1 module.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

e1CfgL2Crc4 1.3.6.1.4.1.335.1.2.1.3.6.2.3.23
Enables/Disables the CRC-4 mode for the L2 interface on the E1 module.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

e1CfgL1Config 1.3.6.1.4.1.335.1.2.1.3.6.2.3.24
This object is a write only object that will signal the proxy to start caching changes to the L1 ds0 connection tables. This is done to solve an anomaly in the marathon/e1 design. The manager must set this object to init before updating any of the e1L1InterfaceTable objects. When all the changes have been set then this object will have to be set to commit (2). The init will cause the proxy to upload the table from the marathon and the commit will cause the proxy to send all the changes to the marathon.
OBJECT-TYPE    
  INTEGER init(1), commit(2)  

e1CfgL2Config 1.3.6.1.4.1.335.1.2.1.3.6.2.3.25
This object is a write only object that will signal the proxy to start caching changes to the L2 ds0 connection tables. This is done to solve an anomaly in the marathon/e1 design. The manager must set this object to init before updating any of the e1L2InterfaceTable objects. When all the changes have been set then this object will have to be set to commit (2). The init will cause the proxy to upload the table from the marathon and the commit will cause the proxy to send all the changes to the marathon.
OBJECT-TYPE    
  INTEGER init(1), commit(2)  

e1FlashControlTable 1.3.6.1.4.1.335.1.2.1.3.6.2.4
Table to control (erase) E1 flash memory in preparation for a code download.
OBJECT-TYPE    
  SEQUENCE OF  
    E1FlashControlEntry

e1FlashControlEntry 1.3.6.1.4.1.335.1.2.1.3.6.2.4.1
Entry within the table specific to a particular E1 module/card number for flash memory control.
OBJECT-TYPE    
  E1FlashControlEntry  

e1FlashControlCardNumber 1.3.6.1.4.1.335.1.2.1.3.6.2.4.1.1
Identifies the E1 module/card number for flash memory control.
OBJECT-TYPE    
  INTEGER 2..5  

e1FlashControlCommand 1.3.6.1.4.1.335.1.2.1.3.6.2.4.1.2
Controls the E1 module flash memory in preparation of a code download. Perform a SET with the value eraseCardFlash to erase the flash memory prior to downloading new E1 flash software.
OBJECT-TYPE    
  INTEGER eraseCardFlash(1)  

e1FlashControlFlashStatus 1.3.6.1.4.1.335.1.2.1.3.6.2.4.1.3
Identifies the status of the E1 module/card flash memory.
OBJECT-TYPE    
  INTEGER bootImageCorrupt(1), t1FlashImageValid(2), t1FlashErased(3), t1FlashImageInvalid(4), securityViolation(5), eraseAborted(6)  

trap 1.3.6.1.4.1.335.1.2.1.3.7
OBJECT IDENTIFIER    

trapAlarmEventReportingGroup 1.3.6.1.4.1.335.1.2.1.3.7.1
OBJECT IDENTIFIER    

trapAlarmEventReportingAlarms 1.3.6.1.4.1.335.1.2.1.3.7.1.1
When enabled, displays the received alarms on command facility.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapAlarmEventReportingEvents 1.3.6.1.4.1.335.1.2.1.3.7.1.2
When enabled, displays the received events on command facility.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapEventsCollectionInterval 1.3.6.1.4.1.335.1.2.1.3.7.2
Periodic interval time between event collection poll cycles (in minutes).
OBJECT-TYPE    
  INTEGER 1..15  

trapSubsTable 1.3.6.1.4.1.335.1.2.1.3.7.3
Table to configure the recipients of the traps.
OBJECT-TYPE    
  SEQUENCE OF  
    TrapSubsEntry

trapSubsEntry 1.3.6.1.4.1.335.1.2.1.3.7.3.1
Entry within the table specifying each recipient.
OBJECT-TYPE    
  TrapSubsEntry  

trapSubsIPAddress 1.3.6.1.4.1.335.1.2.1.3.7.3.1.1
Configures the IP address of the recipient station (manager).
OBJECT-TYPE    
  IpAddress  

trapSubsCommunityString 1.3.6.1.4.1.335.1.2.1.3.7.3.1.2
Configures the expected community string for the trap PDU to be forwarded to the configured recipient.
OBJECT-TYPE    
  DisplayString  

trapSubsAction 1.3.6.1.4.1.335.1.2.1.3.7.3.1.3
Adds a new recipient or deletes an already configured recipient from the subscription list.
OBJECT-TYPE    
  INTEGER subscribe(1), cancelSubscription(2)  

trapCfgAlarmEventsPortGroup 1.3.6.1.4.1.335.1.2.1.3.7.4
OBJECT IDENTIFIER    

trapCfgTrapPort 1.3.6.1.4.1.335.1.2.1.3.7.4.1
Configures the destination for the output of alarms and events.
OBJECT-TYPE    
  INTEGER localCommandPort(1), localLogPort(2), remoteNode(3), externalModem(4)  

trapCfgExtModemPriority 1.3.6.1.4.1.335.1.2.1.3.7.4.2
Configures the priority for alarms and events sent to an external modem.
OBJECT-TYPE    
  INTEGER high(1), low(2)  

trapCfgExtAlarmRelay 1.3.6.1.4.1.335.1.2.1.3.7.5
Controls the external alarm relay on an NMS module.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

trapNodeName 1.3.6.1.4.1.335.1.2.1.3.7.6
Identifies the name of the node that generated the trap.
OBJECT-TYPE    
  DisplayString  

trapCardNumber 1.3.6.1.4.1.335.1.2.1.3.7.7
Identifies the module/card number responsible for generating the trap.
OBJECT-TYPE    
  INTEGER  

trapChannelNumber 1.3.6.1.4.1.335.1.2.1.3.7.8
Identifies the port/channel number responsible for generating the trap.
OBJECT-TYPE    
  INTEGER  

trapFirstNodeName 1.3.6.1.4.1.335.1.2.1.3.7.9
Identifies the source node name of the trap.
OBJECT-TYPE    
  DisplayString  

trapFirstCardNumberOrInternalFacilityIndication 1.3.6.1.4.1.335.1.2.1.3.7.10
This identifies the card number that has generated the trap. A value of 0FFh siginifies a special condition which identifies that the trapChannelNumberOrInternalFacility object in the varBind contains the type of internal facility.
OBJECT-TYPE    
  INTEGER  

trapFirstChannelNumberOrInternalFacility 1.3.6.1.4.1.335.1.2.1.3.7.11
This identifies the channel number that has generated the trap. If the trapCardNumberOrInternalFacilityIndication object has a value of 0FFh then this objects identifies the internal facilities as if value is 0, if the value is 1, and if the value is 2.
OBJECT-TYPE    
  INTEGER  

trapSecondNodeName 1.3.6.1.4.1.335.1.2.1.3.7.12
Identifies the destination node name of the trap.
OBJECT-TYPE    
  DisplayString  

trapSecondCardNumberOrInternalFacilityIndication 1.3.6.1.4.1.335.1.2.1.3.7.13
This identifies the second card number that has generated the trap. A value of 0FFh siginifies a special condition which identifies that the trapChannelNumberOrInternalFacility object in the varBind contains the type of internal facility.
OBJECT-TYPE    
  INTEGER 1..5  

trapSecondChannelNumberOrInternalFacility 1.3.6.1.4.1.335.1.2.1.3.7.14
This identifies the second channel number that has generated the trap. If the trapCardNumberOrInternalFacilityIndication object has a value of 0ffh then this objects identifies the internal facilities as if value is 0, if the value is 1, and if the value is 2.
OBJECT-TYPE    
  INTEGER  

trapClassRequestedOrMatrixRequest 1.3.6.1.4.1.335.1.2.1.3.7.15
This identifies either the requested class number if the values are between the allowable class number range (i.e. 1 to 64) or the matrix request if the object value is 0.
OBJECT-TYPE    
  INTEGER  

trapLinkType 1.3.6.1.4.1.335.1.2.1.3.7.16
Identifies the Link type associated with the trap.
OBJECT-TYPE    
  INTEGER physicalLink(1), frameRelayDLCI(2)  

trapDLCINumber 1.3.6.1.4.1.335.1.2.1.3.7.17
Identifies the DLCI number associated with the trap corresponding to a Frame Relay link.
OBJECT-TYPE    
  INTEGER  

trapDLCIFirstLinkCardNumber 1.3.6.1.4.1.335.1.2.1.3.7.18
Identifies the module/card number associated with the trap corresponding to a DLCI channel of the source Frame Relay link.
OBJECT-TYPE    
  INTEGER  

trapDLCIFirstLinkChannelNumber 1.3.6.1.4.1.335.1.2.1.3.7.19
Identifies the port/channel number associated with the trap corresponding to a DLCI channel of the source Frame Relay link.
OBJECT-TYPE    
  INTEGER  

trapDLCIFirstLinkDLCINumber 1.3.6.1.4.1.335.1.2.1.3.7.20
Identifies the DLCI channel number associated with the trap corresponding to the source Frame Relay link.
OBJECT-TYPE    
  INTEGER  

trapDLCISecondLinkCardNumber 1.3.6.1.4.1.335.1.2.1.3.7.21
Identifies the port/channel number associated with the trap corresponding to a DLCI channel of the destination Frame Relay link.
OBJECT-TYPE    
  INTEGER  

trapDLCISecondLinkChannelNumber 1.3.6.1.4.1.335.1.2.1.3.7.22
Identifies the port/channel number associated with the trap corresponding to a DLCI channel of the destination Frame Relay link.
OBJECT-TYPE    
  INTEGER  

trapDLCISecondLinkDLCINumber 1.3.6.1.4.1.335.1.2.1.3.7.23
Identifies the DLCI channel number associated with the trap corresponding to the destination Frame Relay link.
OBJECT-TYPE    
  INTEGER  

proxy 1.3.6.1.4.1.335.1.2.1.3.8
OBJECT IDENTIFIER    

pxyVersionNumber 1.3.6.1.4.1.335.1.2.1.3.8.1
Identifies the version number of the proxy agent installed.
OBJECT-TYPE    
  DisplayString  

pxyCfgProxySwitch 1.3.6.1.4.1.335.1.2.1.3.8.2
To enable or disable the proxy agent operation on the router module.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pxyAddressMapTableNumber 1.3.6.1.4.1.335.1.2.1.3.8.3
The number of entries in the address map table. This will give the highest numbered entry allocated.
OBJECT-TYPE    
  INTEGER  

pxyAddressMapTable 1.3.6.1.4.1.335.1.2.1.3.8.4
A table of all the MICOM Nodes this proxy is responsible for.
OBJECT-TYPE    
  SEQUENCE OF  
    PxyAddressMapEntry

pxyAddressMapEntry 1.3.6.1.4.1.335.1.2.1.3.8.4.1
An entry that describes the network node which this proxy agent manages.
OBJECT-TYPE    
  PxyAddressMapEntry  

pxyAddressMapNodeNumber 1.3.6.1.4.1.335.1.2.1.3.8.4.1.1
The node number used to communicate with the device associated with this entry.
OBJECT-TYPE    
  INTEGER  

pxyAddressMapEntryStatus 1.3.6.1.4.1.335.1.2.1.3.8.4.1.2
A code representing the current state of the table entry. This is provided to define relationship within the table entry and to delete and/or add devics to the Address Table. Default is notReady
OBJECT-TYPE    
  INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)  

pxyAddressMapNodeNameAndCommunity 1.3.6.1.4.1.335.1.2.1.3.8.4.1.3
The node name used to communicate with the device associated with this entry. This unique name is also used to de-multiplex the proxy managed nodes.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

pxyAddressMapChangeNodeNumberTo 1.3.6.1.4.1.335.1.2.1.3.8.4.1.4
In order to change a node number of an existing node you must use this entry with the NodeNumber entry being the existing node number.
OBJECT-TYPE    
  INTEGER  

pxySupportedVersionTable 1.3.6.1.4.1.335.1.2.1.3.8.5
A table of sotware revision numbers this proxy agent support.
OBJECT-TYPE    
  SEQUENCE OF  
    PxySupportedVersionEntry

pxySupportedVersionEntry 1.3.6.1.4.1.335.1.2.1.3.8.5.1
An entry that describes the version number of the software this proxy agent supports.
OBJECT-TYPE    
  PxySupportedVersionEntry  

pxySupportedIndex 1.3.6.1.4.1.335.1.2.1.3.8.5.1.1
Identifies the instance and hence the row of the entry in this table.
OBJECT-TYPE    
  INTEGER  

pxySupportedVersionNumber 1.3.6.1.4.1.335.1.2.1.3.8.5.1.2
Identifies the Node Software Version number this proxy agent understands and supports.
OBJECT-TYPE    
  INTEGER phase5dot0(1), phase5dot0plus(2)  

pxyStatisticsLastNodeServed 1.3.6.1.4.1.335.1.2.1.3.8.6
Represent the last successul transaction between this proxy agent and the foreign node.
OBJECT-TYPE    
  INTEGER  

pxyStatisticsLastErrorNode 1.3.6.1.4.1.335.1.2.1.3.8.7
Represent the last un-successful transaction of this proxy agent and the foreign node.
OBJECT-TYPE    
  INTEGER  

pxyStatisticsLastSNMPError 1.3.6.1.4.1.335.1.2.1.3.8.8
The SNMP error from the last transaction of this proxy agent with the node referenced by pxyStatisticsLastErrorNode.
OBJECT-TYPE    
  INTEGER  

pxyStatisticsLastErrorReturnCode 1.3.6.1.4.1.335.1.2.1.3.8.9
The specific error code from the last transaction of this proxy agent with the node referenced by pxyStatisticsLastErrorNode.
OBJECT-TYPE    
  INTEGER  

pxyStatisticsTotalRequests 1.3.6.1.4.1.335.1.2.1.3.8.10
A count of requests received since the last reboot of the system.
OBJECT-TYPE    
  Counter  

pxyStatisticsTotalInternalTraps 1.3.6.1.4.1.335.1.2.1.3.8.11
A count of internal Traps transmitted since the last reboot of the system.
OBJECT-TYPE    
  Counter  

pxyPPPTotalCounts 1.3.6.1.4.1.335.1.2.1.3.8.12
A count of translated PPP requests transmitted to the managed nodes since last reboot of the system.
OBJECT-TYPE    
  Counter  

pxyPPPRejectCounts 1.3.6.1.4.1.335.1.2.1.3.8.13
A count of rejected PPP requests transmitted to the managed nodes since last reboot of the system.
OBJECT-TYPE    
  Counter  

pxyCacheUpdate 1.3.6.1.4.1.335.1.2.1.3.8.14
Configures to force update the cached information maintained in proxy agent.
OBJECT-TYPE    
  INTEGER cdChanTable(1)  

pxyNetworkAccessNodeName 1.3.6.1.4.1.335.1.2.1.3.8.15
This is the name of the Integration unit that the proxy is physically attached to. This node must already be in the proxy's Address Map in order to set it here. This NodeName is stored in the FileControlFile.Data file on the host that the proxy is installed on.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

control 1.3.6.1.4.1.335.1.2.1.4
OBJECT IDENTIFIER    

nodeResetGroup 1.3.6.1.4.1.335.1.2.1.4.1
OBJECT IDENTIFIER    

nodeResetCode 1.3.6.1.4.1.335.1.2.1.4.1.1
Resets the local node and configures to restart with the factory default values or retain the current configuration; all channels connected locally are also reset.
OBJECT-TYPE    
  INTEGER coldRestart(1), warmRestart(2)  

nodeResetType 1.3.6.1.4.1.335.1.2.1.4.1.2
Configures to retstart with the current operational code or restart and load the image from the flash.
OBJECT-TYPE    
  INTEGER restartCurrentSoftware(1), reloadSoftwareFromFlash(2)  

asyncResetTable 1.3.6.1.4.1.335.1.2.1.4.2
Table to reset an async channel.
OBJECT-TYPE    
  SEQUENCE OF  
    AsyncResetEntry

asyncResetEntry 1.3.6.1.4.1.335.1.2.1.4.2.1
Entry within the table specifying particular channel on specific module/card.
OBJECT-TYPE    
  AsyncResetEntry  

asyncResetCardNumber 1.3.6.1.4.1.335.1.2.1.4.2.1.1
Indicates the card/module number of the channel to be reset.
OBJECT-TYPE    
  INTEGER 1..5  

asyncResetChannelNumber 1.3.6.1.4.1.335.1.2.1.4.2.1.2
Identifies the channel number to be reset.
OBJECT-TYPE    
  INTEGER 1..6  

asyncResetCommand 1.3.6.1.4.1.335.1.2.1.4.2.1.3
Triggers the reset operation.
OBJECT-TYPE    
  INTEGER resetChannel(1)  

syncResetTable 1.3.6.1.4.1.335.1.2.1.4.3
Table to reset a sync channel.
OBJECT-TYPE    
  SEQUENCE OF  
    SyncResetEntry

syncResetEntry 1.3.6.1.4.1.335.1.2.1.4.3.1
Entry within the table specifying particular channel on specific module/card.
OBJECT-TYPE    
  SyncResetEntry  

syncResetCardNumber 1.3.6.1.4.1.335.1.2.1.4.3.1.1
Indicates the card/module number of the channel to be reset.
OBJECT-TYPE    
  INTEGER 1..5  

syncResetChannelNumber 1.3.6.1.4.1.335.1.2.1.4.3.1.2
Identifies the channel number to be reset.
OBJECT-TYPE    
  INTEGER 1..6  

syncResetCommand 1.3.6.1.4.1.335.1.2.1.4.3.1.3
Triggers the reset operation.
OBJECT-TYPE    
  INTEGER resetChannel(1)  

voiceResetTable 1.3.6.1.4.1.335.1.2.1.4.4
Table to reset a voice channel.
OBJECT-TYPE    
  SEQUENCE OF  
    VoiceResetEntry

voiceResetEntry 1.3.6.1.4.1.335.1.2.1.4.4.1
Entry within the table specifying particular channel on specific module/card.
OBJECT-TYPE    
  VoiceResetEntry  

voiceResetCardNumber 1.3.6.1.4.1.335.1.2.1.4.4.1.1
Indicates the card/module number of the channel to be reset.
OBJECT-TYPE    
  INTEGER 2..5  

voiceResetChannelNumber 1.3.6.1.4.1.335.1.2.1.4.4.1.2
Identifies the channel number to be reset.
OBJECT-TYPE    
  INTEGER  

voiceResetCommand 1.3.6.1.4.1.335.1.2.1.4.4.1.3
Triggers the reset operation.
OBJECT-TYPE    
  INTEGER resetVoiceChannel(1)  

linkResetTable 1.3.6.1.4.1.335.1.2.1.4.5
Table to reset the links. Resetting a link clears all information on the selected link.
OBJECT-TYPE    
  SEQUENCE OF  
    LinkResetEntry

linkResetEntry 1.3.6.1.4.1.335.1.2.1.4.5.1
Entry within the table for a specifying a particular link.
OBJECT-TYPE    
  LinkResetEntry  

linkResetCardNumber 1.3.6.1.4.1.335.1.2.1.4.5.1.1
Indicates the card/module number of the link to be reset.
OBJECT-TYPE    
  INTEGER 1..5  

linkResetChannelNumber 1.3.6.1.4.1.335.1.2.1.4.5.1.2
Identifies the link/channel number to be reset.
OBJECT-TYPE    
  INTEGER 1..6  

linkResetCommand 1.3.6.1.4.1.335.1.2.1.4.5.1.3
Triggers the reset operation.
OBJECT-TYPE    
  INTEGER resetLink(1)  

clearLatchedAlarms 1.3.6.1.4.1.335.1.2.1.4.6
Clears the latched alarm messages on the local node.
OBJECT-TYPE    
  INTEGER clearLatchedAlarms(1)  

pppLinkOperationGroup 1.3.6.1.4.1.335.1.2.1.4.7
OBJECT IDENTIFIER    

pppLinkOperationAction 1.3.6.1.4.1.335.1.2.1.4.7.1
Command to resume normal operation of the link. (Used for link debugging purposes.)
OBJECT-TYPE    
  INTEGER resumeNormalOperation(1)  

pppLinkTimeOutAction 1.3.6.1.4.1.335.1.2.1.4.7.2
Command to disable the link timeout feature of the link. (Used for link debugging purposes.)
OBJECT-TYPE    
  INTEGER disableLinkTimeout(1)  

pppLinkDumpAction 1.3.6.1.4.1.335.1.2.1.4.7.3
Command to route rejected NMS commands to the log port for output. (Used for link debugging purposes.)
OBJECT-TYPE    
  INTEGER dumpRejectedNmsCmdToLogport(1)  

flashEPROMCommand 1.3.6.1.4.1.335.1.2.1.4.8
Command to erase flash memory on the CCM.
OBJECT-TYPE    
  INTEGER eraseBothBanks(1), eraseBankOne(2), eraseBankTwo(3)  

voiceFlashEPROMTable 1.3.6.1.4.1.335.1.2.1.4.9
Table to erase flash memory of voice modules.
OBJECT-TYPE    
  SEQUENCE OF  
    VoiceFlashEPROMEntry

voiceFlashEPROMEntry 1.3.6.1.4.1.335.1.2.1.4.9.1
Entry within the table specific to a particular voice channel on a particular module/card for erasing flash memory.
OBJECT-TYPE    
  VoiceFlashEPROMEntry  

voiceFlashEPROMCardNumber 1.3.6.1.4.1.335.1.2.1.4.9.1.1
Identifies the card number of the voice module for erasing the flash memory.
OBJECT-TYPE    
  INTEGER 2..5  

voiceFlashEPROMChannelNumber 1.3.6.1.4.1.335.1.2.1.4.9.1.2
Identifies the channel number of the voice module for erasing the flash memory.
OBJECT-TYPE    
  INTEGER 1..6  

voiceFlashEPROMCommand 1.3.6.1.4.1.335.1.2.1.4.9.1.3
Command to erase the flash memory of a particular voice channel module.
OBJECT-TYPE    
  INTEGER eraseFlash(1)  

lanCardResetTable 1.3.6.1.4.1.335.1.2.1.4.10
Table to reset the integral LAN module.
OBJECT-TYPE    
  SEQUENCE OF  
    LanCardResetEntry

lanCardResetEntry 1.3.6.1.4.1.335.1.2.1.4.10.1
Entry within the table to specify a particular card/module to be reset.
OBJECT-TYPE    
  LanCardResetEntry  

lanCardResetCardNumber 1.3.6.1.4.1.335.1.2.1.4.10.1.1
Identifies the module number to be reset.
OBJECT-TYPE    
  INTEGER 2..5  

lanCardResetType 1.3.6.1.4.1.335.1.2.1.4.10.1.2
Commands a specific type of reset for the integral Lan module.
OBJECT-TYPE    
  INTEGER resetWithCurrentValues(1), resetWithDefaultValues(2), wanToLanDownload(3), lanToLanDownload(4)  

chControlTable 1.3.6.1.4.1.335.1.2.1.4.11
Table controls the operating condition (status) of the channels in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    ChControlEntry

chControlEntry 1.3.6.1.4.1.335.1.2.1.4.11.1
Entry within the table specific to a particular channel on specific module/card.
OBJECT-TYPE    
  ChControlEntry  

chControlCardNumber 1.3.6.1.4.1.335.1.2.1.4.11.1.1
Identifies the card/module number of channel to be configured.
OBJECT-TYPE    
  INTEGER 1..5  

chControlChannelNumber 1.3.6.1.4.1.335.1.2.1.4.11.1.2
Identifies the channel number to be configured.
OBJECT-TYPE    
  INTEGER  

chControlCommand 1.3.6.1.4.1.335.1.2.1.4.11.1.3
Object triggers the specified status action valid on the channels. Option 1 returns a out-of-service async or voice/fax port to the idle state. The option 2 permits to take an async or voice/fax channel from idle state to out-of-service. Option 3 causes two selected (idle or out-of-service) ports to be connected. The ports must be of like kind. An attempt to SET this Option without first SET'ing the other required information (chControlForceConnToNodeName, chControlForceConnToCard, and chControlForceConnToChannel) will return an error.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), forcedConnect(3), forcedDisconnect(4)  

chControlForceConnToNodeName 1.3.6.1.4.1.335.1.2.1.4.11.1.4
The node number of the other end of the channel to be connected.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

chControlForceConnToCard 1.3.6.1.4.1.335.1.2.1.4.11.1.5
The module/card number of the other end of the channel to be connected.
OBJECT-TYPE    
  INTEGER 1..5  

chControlForceConnToChannel 1.3.6.1.4.1.335.1.2.1.4.11.1.6
The channel number of the other end of the channel to be connected.
OBJECT-TYPE    
  INTEGER  

frameRelayDLCIResetTable 1.3.6.1.4.1.335.1.2.1.4.12
Table to reset the frame relay DLCI.
OBJECT-TYPE    
  SEQUENCE OF  
    FrameRelayDLCIResetEntry

frameRelayDLCIResetEntry 1.3.6.1.4.1.335.1.2.1.4.12.1
Entry within the table to specifying a particular DLCI on a specific module and specific channel.
OBJECT-TYPE    
  FrameRelayDLCIResetEntry  

frameRelayDLCIResetCardNumber 1.3.6.1.4.1.335.1.2.1.4.12.1.1
Identifies the card/module for the channel and associated DLCI.
OBJECT-TYPE    
  INTEGER 1..5  

frameRelayDLCIResetChannelNumber 1.3.6.1.4.1.335.1.2.1.4.12.1.2
Identifies the channel number for the DLCI to be reset.
OBJECT-TYPE    
  INTEGER 1..6  

frameRelayDLCIResetDLCINumber 1.3.6.1.4.1.335.1.2.1.4.12.1.3
This write-only object signfies the DLCI which is intended to be reset. The card number and the channel number objects identifies the proper instance of the particular link
OBJECT-TYPE    
  INTEGER  

frameRelayAllDLCIResetTable 1.3.6.1.4.1.335.1.2.1.4.13
Table to reset all the configured DLCI on a particular frame relay link.
OBJECT-TYPE    
  SEQUENCE OF  
    FrameRelayAllDLCIResetEntry

frameRelayAllDLCIResetEntry 1.3.6.1.4.1.335.1.2.1.4.13.1
Entry within the table specifying a particular channel/link.
OBJECT-TYPE    
  FrameRelayAllDLCIResetEntry  

frameRelayAllDLCIResetCardNumber 1.3.6.1.4.1.335.1.2.1.4.13.1.1
Identifies the card/module for all the DLCIs to be reset.
OBJECT-TYPE    
  INTEGER 1..5  

frameRelayAllDLCIResetChannelNumber 1.3.6.1.4.1.335.1.2.1.4.13.1.2
Identifies the channel/link for all the DLCIs to be reset.
OBJECT-TYPE    
  INTEGER 1..6  

frameRelayAllDLCIResetCommand 1.3.6.1.4.1.335.1.2.1.4.13.1.3
Resets all the configured DLCI on a specific link/channel.
OBJECT-TYPE    
  INTEGER resetAllDLCI(1)  

t1e1CardResetTable 1.3.6.1.4.1.335.1.2.1.4.14
Table to reset the T1/E1 module.
OBJECT-TYPE    
  SEQUENCE OF  
    T1e1CardResetEntry

t1e1CardResetEntry 1.3.6.1.4.1.335.1.2.1.4.14.1
Entry within the table specifying particular T1/E1 modle.
OBJECT-TYPE    
  T1e1CardResetEntry  

t1e1CardResetCardNumber 1.3.6.1.4.1.335.1.2.1.4.14.1.1
Identifies the card/module number to be reset.
OBJECT-TYPE    
  INTEGER 2..5  

t1e1CardResetCommand 1.3.6.1.4.1.335.1.2.1.4.14.1.2
Resets the module to either the current configuration (option 1) or factory default values (option 2) .
OBJECT-TYPE    
  INTEGER warmReset(1), coldReset(2)  

nvflashUpdate 1.3.6.1.4.1.335.1.2.1.4.15
This object is for platforms which use flash instead of CMOS for configuration storage. These platforms update the configuration in flash on a periodic basis rather than after each change. This object will force an immediate configuration storage update.
OBJECT-TYPE    
  INTEGER writeToFlash(1)  

status 1.3.6.1.4.1.335.1.2.1.5
OBJECT IDENTIFIER    

portTypeStatusTable 1.3.6.1.4.1.335.1.2.1.5.1
Identifies the type of all the channels/ports/links on a node.
OBJECT-TYPE    
  SEQUENCE OF  
    PortTypeStatusEntry

portTypeStatusEntry 1.3.6.1.4.1.335.1.2.1.5.1.1
Entry within the table specifying a particular channel.
OBJECT-TYPE    
  PortTypeStatusEntry  

portTypeStatusCardNumber 1.3.6.1.4.1.335.1.2.1.5.1.1.1
Identifies the card/module number of the intended channel.
OBJECT-TYPE    
  INTEGER  

portTypeStatusChannelNumber 1.3.6.1.4.1.335.1.2.1.5.1.1.2
Identifies the channel number.
OBJECT-TYPE    
  INTEGER  

portTypeStatusChannelType 1.3.6.1.4.1.335.1.2.1.5.1.1.3
Identifies the channel/port/link type of the specified channel.
OBJECT-TYPE    
  INTEGER mux(1), async(2), sync(3), voice(4), esi(5), badChannel(6), x21(7), localEsi(8), esiSecondary(9), frameRelay(10), disabledViaConfig(11), digitalVoice(12)  

asyncChStatusTable 1.3.6.1.4.1.335.1.2.1.5.2
Table of EIA status for async channels.
OBJECT-TYPE    
  SEQUENCE OF  
    AsyncChStatusEntry

asyncChStatusEntry 1.3.6.1.4.1.335.1.2.1.5.2.1
Entry within the table specific to a particular async channel on a module/card for EIA status.
OBJECT-TYPE    
  AsyncChStatusEntry  

asyncChStatusCardNumber 1.3.6.1.4.1.335.1.2.1.5.2.1.1
Identifies the module/card number for EIA status of the async channel.
OBJECT-TYPE    
  INTEGER 1..5  

asyncChStatusChannelNumber 1.3.6.1.4.1.335.1.2.1.5.2.1.2
Identifies the async channel for EIA status.
OBJECT-TYPE    
  INTEGER 1..32  

asyncChStatusEiaInputsRTSStatus 1.3.6.1.4.1.335.1.2.1.5.2.1.3
Indicates the async channel EIA input status of the RTS signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChStatusEiaInputsDTRStatus 1.3.6.1.4.1.335.1.2.1.5.2.1.4
Indicates the async channel EIA input status of the DTR signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChStatusEiaInputsUAStatus 1.3.6.1.4.1.335.1.2.1.5.2.1.5
Indicates the async channel EIA input status of the UA signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChStatusEiaInputsBUSYStatus 1.3.6.1.4.1.335.1.2.1.5.2.1.6
Indicates the async channel EIA input status of the Busy signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChStatusEiaOutputsRIStatus 1.3.6.1.4.1.335.1.2.1.5.2.1.7
Indicates the async channel EIA output status of the RI signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChStatusEiaOutputsRLSDStatus 1.3.6.1.4.1.335.1.2.1.5.2.1.8
Indicates the async channel EIA output status of the RLSD signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChStatusEiaOutputsCTSStatus 1.3.6.1.4.1.335.1.2.1.5.2.1.9
Indicates the async channel EIA output status of the CTS signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

asyncChStatusEiaOutputsDSRStatus 1.3.6.1.4.1.335.1.2.1.5.2.1.10
Indicates the async channel EIA output status of the DSR signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

syncChStatusTable 1.3.6.1.4.1.335.1.2.1.5.3
Table of EIA status for sync channels.
OBJECT-TYPE    
  SEQUENCE OF  
    SyncChStatusEntry

syncChStatusEntry 1.3.6.1.4.1.335.1.2.1.5.3.1
Entry within the table specific to a particular sync channel on a module/card for EIA status.
OBJECT-TYPE    
  SyncChStatusEntry  

syncChStatusCardNumber 1.3.6.1.4.1.335.1.2.1.5.3.1.1
Identifies the module/card number for EIA status of the sync channel.
OBJECT-TYPE    
  INTEGER 1..5  

syncChStatusChannelNumber 1.3.6.1.4.1.335.1.2.1.5.3.1.2
Identifies the sync channel for EIA status.
OBJECT-TYPE    
  INTEGER 1..6  

syncChStatusEiaInputsRTSStatus 1.3.6.1.4.1.335.1.2.1.5.3.1.3
Indicates the sync channel EIA input status of the RTS signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

syncChStatusEiaInputsDTRStatus 1.3.6.1.4.1.335.1.2.1.5.3.1.4
Indicates the sync channel EIA input status of the DTR signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

syncChStatusEiaInputsUAStatus 1.3.6.1.4.1.335.1.2.1.5.3.1.5
Indicates the sync channel EIA input status of the UA signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

syncChStatusEiaInputsBUSYStatus 1.3.6.1.4.1.335.1.2.1.5.3.1.6
Indicates the sync channel EIA input status of the Busy signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

syncChStatusEiaOutputsRIStatus 1.3.6.1.4.1.335.1.2.1.5.3.1.7
Indicates the sync channel EIA output status of the RI signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

syncChStatusEiaOutputsRLSDStatus 1.3.6.1.4.1.335.1.2.1.5.3.1.8
Indicates the sync channel EIA output status of the RLSD signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

syncChStatusEiaOutputsCTSStatus 1.3.6.1.4.1.335.1.2.1.5.3.1.9
Indicates the sync channel EIA output status of the CTS signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

syncChStatusEiaOutputsDSRStatus 1.3.6.1.4.1.335.1.2.1.5.3.1.10
Indicates the sync channel EIA output status of the DSR signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

voiceChStatusTable 1.3.6.1.4.1.335.1.2.1.5.4
Table of voice channel status indicators.
OBJECT-TYPE    
  SEQUENCE OF  
    VoiceChStatusEntry

voiceChStatusEntry 1.3.6.1.4.1.335.1.2.1.5.4.1
Entry within the table specific to a particular voice channel on a module/card for status indicators.
OBJECT-TYPE    
  VoiceChStatusEntry  

voiceChStatusCardNumber 1.3.6.1.4.1.335.1.2.1.5.4.1.1
Identifies the module/card number of the voice channel for status indications.
OBJECT-TYPE    
  INTEGER 1..5  

voiceChStatusChannelNumber 1.3.6.1.4.1.335.1.2.1.5.4.1.2
Identifies the voice channel number for status indications.
OBJECT-TYPE    
  INTEGER  

voiceChStatusInputLevel 1.3.6.1.4.1.335.1.2.1.5.4.1.3
Indicates the level of the input signal monitored, in dBm.
OBJECT-TYPE    
  INTEGER levelLessThanNeg25dBm(1), levelNeg24dBm(2), levelNeg21dBm(3), levelNeg18dBm(4), levelNeg15dBm(5), levelNeg12dBm(6), levelNeg10dBm(7), levelNeg8dBm(8), levelNeg6dBm(9), levelNeg5dBm(10), levelNeg4dBm(11), levelNeg3dBm(12), levelNeg2dBm(13), levelNeg1dBm(14), level0dBm(15), levelgreaterThan0dBm(16), levelNotAvailable(17)  

voiceChStatusStatus 1.3.6.1.4.1.335.1.2.1.5.4.1.4
Indicates the mode of the current voice channel operation.
OBJECT-TYPE    
  INTEGER onHook(1), offHook(2), busy(3)  

voiceChStatusPromID 1.3.6.1.4.1.335.1.2.1.5.4.1.5
Indicates the Prom ID of the voice channel.
OBJECT-TYPE    
  DisplayString SIZE(0..4)  

voiceChStatusSoftwareRevision 1.3.6.1.4.1.335.1.2.1.5.4.1.6
Indicates the software revision of the voice channel.
OBJECT-TYPE    
  DisplayString SIZE(0..3)  

voiceChStatusTestMode 1.3.6.1.4.1.335.1.2.1.5.4.1.7
Indicates the type of test that is currently running, if testing.
OBJECT-TYPE    
  INTEGER none(1), levelDisplay(2), localSelfTest(3), localLoopback(4), remoteSelfTest(5), remoteLoopback(6)  

voiceChStatusTestDSPResult 1.3.6.1.4.1.335.1.2.1.5.4.1.8
Indicates the DSP test results of the voice channel following initiation of a voice channel self test.
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

voiceChStatusTestDataRAMResult 1.3.6.1.4.1.335.1.2.1.5.4.1.9
Indicates the data RAM test results of the voice channel following initiation of a voice channel self test.
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

voiceChStatusTestCodeRAMResult 1.3.6.1.4.1.335.1.2.1.5.4.1.10
Indicates the code RAM test results of the voice channel following initiation of a voice channel self test.
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

voiceChStatusTestAnalogHwResult 1.3.6.1.4.1.335.1.2.1.5.4.1.11
Indicates the Analog Hardware test results of the voice channel following initiation of a voice channel self test.
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

voiceChStatusTestDeviceCfgResult 1.3.6.1.4.1.335.1.2.1.5.4.1.12
Indicates the device configuration test results of the voice channel following initiation of a voice channel self test.
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

voiceChStatusFlashState 1.3.6.1.4.1.335.1.2.1.5.4.1.13
Indicates the state of the flash memory residing on the voice channel.
OBJECT-TYPE    
  INTEGER notInstalled(1), valid(2), erased(3), invalidChecksum(4), noAnalogDriver(5), securityViolation(6)  

voiceChStatusEPROMStatus 1.3.6.1.4.1.335.1.2.1.5.4.1.14
Indicates the status of the EPROM memory residing on the voice channel.
OBJECT-TYPE    
  INTEGER notInstalled(1), currentlyOperating(2), presentButNotOperating(3)  

linkStatusTable 1.3.6.1.4.1.335.1.2.1.5.5
Table of link channel status of the Integration unit.
OBJECT-TYPE    
  SEQUENCE OF  
    LinkStatusEntry

linkStatusEntry 1.3.6.1.4.1.335.1.2.1.5.5.1
Entry within the table specific to a particular channel number on a module/card for status of the links.
OBJECT-TYPE    
  LinkStatusEntry  

linkStatusCardNumber 1.3.6.1.4.1.335.1.2.1.5.5.1.1
Identifies the module/card number for link status.
OBJECT-TYPE    
  INTEGER 1..5  

linkStatusChannelNumber 1.3.6.1.4.1.335.1.2.1.5.5.1.2
Identifies the port/channel number for link status.
OBJECT-TYPE    
  INTEGER  

linkStatusLinkType 1.3.6.1.4.1.335.1.2.1.5.5.1.3
Indicates the type of link configured on the Integration unit.
OBJECT-TYPE    
  INTEGER muxLink(1), esi(2), x21MuxLink(3), localESI(4), esiSecondary(5), frameRelay(6)  

linkStatusIntegralDevType 1.3.6.1.4.1.335.1.2.1.5.5.1.4
Indicates the presence of an integral device on the Integration unit.
OBJECT-TYPE    
  INTEGER none(1), isu56K(2)  

linkStatusIntegralDevSlotNumber 1.3.6.1.4.1.335.1.2.1.5.5.1.5
Indicates the location slot of the integral device, if present.
OBJECT-TYPE    
  INTEGER slotA(1), slotB(2), slotC(3), slotD(4), slotE(5)  

linkStatusIntegralDeviceNumber 1.3.6.1.4.1.335.1.2.1.5.5.1.6
Indicates the channel location of the integral device, if present.
OBJECT-TYPE    
  INTEGER channel1(1), channel2(2)  

linkStatusStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.7
Indicates the status of the link.
OBJECT-TYPE    
  INTEGER down(1), up(2), loopback(3)  

linkStatusNodeNumber 1.3.6.1.4.1.335.1.2.1.5.5.1.8
Indicates the ID number of the remote linked Integration unit.
OBJECT-TYPE    
  INTEGER  

linkStatusRemoteChannelNumber 1.3.6.1.4.1.335.1.2.1.5.5.1.9
Indicates the channel number of the remote linked Integration unit.
OBJECT-TYPE    
  INTEGER  

linkStatusRemoteCardNumber 1.3.6.1.4.1.335.1.2.1.5.5.1.10
Indicates the module/card number of the remote linked Integration unit.
OBJECT-TYPE    
  INTEGER  

linkStatusEiaOutputsRTSStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.11
Indicates the link channel EIA output status of the RTS signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

linkStatusEiaOutputsDTRStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.12
Indicates the link channel EIA output status of the DTR signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

linkStatusEiaOutputsBUSYStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.13
Indicates the link channel EIA output status of the Busy signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

linkStatusEiaOutputsUAStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.14
Indicates the link channel EIA output status of the UA signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

linkStatusEiaInputsRLSDStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.15
Indicates the link channel EIA output status of the RLSD signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

linkStatusEiaInputsDSRStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.16
Indicates the link channel EIA input status of the DSR signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

linkStatusEiaInputsRIStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.17
Indicates the link channel EIA input status of the RI signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

linkStatusEiaInputsCTSStatus 1.3.6.1.4.1.335.1.2.1.5.5.1.18
Indicates the link channel EIA input status of the CTS signal.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

frameRelayLinkDLCIStatusTable 1.3.6.1.4.1.335.1.2.1.5.6
Table of Frame Relay link status of DLCI channels.
OBJECT-TYPE    
  SEQUENCE OF  
    FrameRelayLinkDLCIStatusEntry

frameRelayLinkDLCIStatusEntry 1.3.6.1.4.1.335.1.2.1.5.6.1
Entry within the table specific to a particular DLCI channel, FR access port/channel, and module/card number for FR link status.
OBJECT-TYPE    
  FrameRelayLinkDLCIStatusEntry  

frameRelayLinkDLCIStatusCardNumber 1.3.6.1.4.1.335.1.2.1.5.6.1.1
Identifies the module/card number for FR link status of DLCI channels.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkDLCIStatusChannelNumber 1.3.6.1.4.1.335.1.2.1.5.6.1.2
Identifies the port/channel number of the FR access link for DLCI channel status.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkDLCIStatusDLCINumber 1.3.6.1.4.1.335.1.2.1.5.6.1.3
Identifies the DLCI channel number for FR link status.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkDLCIStatusNumberOfDLCIs 1.3.6.1.4.1.335.1.2.1.5.6.1.4
Indicates the number of DLCIs for a particular FR access link.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkDLCIStatusConfOnMarathon 1.3.6.1.4.1.335.1.2.1.5.6.1.5
Indicates whether or not the DLCI channel is configured by the Integration unit.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

frameRelayLinkDLCIStatusReportedByPBX 1.3.6.1.4.1.335.1.2.1.5.6.1.6
Indicates whether or not the DLCI channel is reported by a PBX system.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

frameRelayLinkDLCIStatusActive 1.3.6.1.4.1.335.1.2.1.5.6.1.7
Indicates the status of the DLCI channel; active or not.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

frameRelayLinkDLCIStatusLinkStatus 1.3.6.1.4.1.335.1.2.1.5.6.1.8
Indicates the status of the FR link for the specific DLCI channel. Note: Transparent and Fragmented DLCI channel types will indicate 'down'.
OBJECT-TYPE    
  INTEGER down(1), up(2)  

frameRelayLinkDLCIStatusUpConnectedNodeNumber 1.3.6.1.4.1.335.1.2.1.5.6.1.9
Indicates the node ID # of the remote linked Integration unit.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkDLCIStatusUpConnectedChannelNumber 1.3.6.1.4.1.335.1.2.1.5.6.1.10
Indicates the port/channel number of the FR access link of the remote linked Integration unit.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkDLCIStatusUpConnectedCardNumber 1.3.6.1.4.1.335.1.2.1.5.6.1.11
Indicates the module/card number of the FR access link of the remote linked Integration unit.
OBJECT-TYPE    
  INTEGER  

frameRelayLinkDLCIStatusUpRemoteDLCINumber 1.3.6.1.4.1.335.1.2.1.5.6.1.12
Indicates the DLCI number of the remote linked Integration unit.
OBJECT-TYPE    
  INTEGER  

chConnectionStatusTable 1.3.6.1.4.1.335.1.2.1.5.7
Table of channel connection status indications.
OBJECT-TYPE    
  SEQUENCE OF  
    ChConnectionStatusEntry

chConnectionStatusEntry 1.3.6.1.4.1.335.1.2.1.5.7.1
Entry within the table specific to a particular channel number on a module/card for connection status indications.
OBJECT-TYPE    
  ChConnectionStatusEntry  

chConnectionStatusCardNumber 1.3.6.1.4.1.335.1.2.1.5.7.1.1
Identifies the module/card number of the channel for connection status indication.
OBJECT-TYPE    
  INTEGER 1..5  

chConnectionStatusChannelNumber 1.3.6.1.4.1.335.1.2.1.5.7.1.2
Identifies the channel number for connection status indication.
OBJECT-TYPE    
  INTEGER  

chConnectionStatusChannelStatus 1.3.6.1.4.1.335.1.2.1.5.7.1.3
Indicates the connection status of the channel.
OBJECT-TYPE    
  INTEGER idle(1), connectInProgress(2), fconnInProgress(3), queued(4), connected(5), forceConnected(6), disconnectInProgress(7), outOfService(8)  

chConnectionStatusConnectedToNode 1.3.6.1.4.1.335.1.2.1.5.7.1.4
Indicates the node ID # of the destination channel connection, if any.
OBJECT-TYPE    
  INTEGER  

chConnectionStatusConnectedToChannel 1.3.6.1.4.1.335.1.2.1.5.7.1.5
Indicates the destination channel number of the connection, if any.
OBJECT-TYPE    
  INTEGER  

chConnectionStatusConnectedToCard 1.3.6.1.4.1.335.1.2.1.5.7.1.6
Indicates the destination module/card number of the connection, if any.
OBJECT-TYPE    
  INTEGER  

chConnectionStatusConnectedToInternalFacility 1.3.6.1.4.1.335.1.2.1.5.7.1.7
Indicates a channel connection to an internal facility ( or ), if any.
OBJECT-TYPE    
  INTEGER notApplicable(1), dollarCMDFacility(2), dollarPPPFacility(3)  

remoteNodeStatusTable 1.3.6.1.4.1.335.1.2.1.5.8
Table of remote nodes in the MICOM Integration unit network.
OBJECT-TYPE    
  SEQUENCE OF  
    RemoteNodeStatusEntry

remoteNodeStatusEntry 1.3.6.1.4.1.335.1.2.1.5.8.1
Entry within the table specific to each indexed node in the MICOM Integration unit network.
OBJECT-TYPE    
  RemoteNodeStatusEntry  

remoteNodeStatusIndex 1.3.6.1.4.1.335.1.2.1.5.8.1.1
Identifies the index for the table of remote nodes in the MICOM Integration unit network.
OBJECT-TYPE    
  INTEGER  

remoteNodeStatusName 1.3.6.1.4.1.335.1.2.1.5.8.1.2
Indicates the remote node name in the MICOM Integration unit network.
OBJECT-TYPE    
  DisplayString SIZE(1..8)  

remoteNodeStatusType 1.3.6.1.4.1.335.1.2.1.5.8.1.3
Indicates the type of remote node in the MICOM Integration unit network.
OBJECT-TYPE    
  INTEGER marathonNode(1), feederMux(2)  

remoteNodeStatusNumber 1.3.6.1.4.1.335.1.2.1.5.8.1.4
Indicates the node ID # of the remote node in the MICOM Integration unit network.
OBJECT-TYPE    
  INTEGER  

classStatusTable 1.3.6.1.4.1.335.1.2.1.5.9
Table of switching classes defined for the Integration unit.
OBJECT-TYPE    
  SEQUENCE OF  
    ClassStatusEntry

classStatusEntry 1.3.6.1.4.1.335.1.2.1.5.9.1
Entry within the table specific to each indexed class defined for the Integration unit.
OBJECT-TYPE    
  ClassStatusEntry  

classStatusCfgClassIndex 1.3.6.1.4.1.335.1.2.1.5.9.1.1
Identifies the index for the table of defined switching classes for the Integration unit.
OBJECT-TYPE    
  INTEGER  

classStatusCfgClassNumber 1.3.6.1.4.1.335.1.2.1.5.9.1.2
Indicates the switching class numbers defined for the Integration unit.
OBJECT-TYPE    
  INTEGER  

classQueueStatusTable 1.3.6.1.4.1.335.1.2.1.5.10
Table of connection class queue channels defined for the Integration unit.
OBJECT-TYPE    
  SEQUENCE OF  
    ClassQueueStatusEntry

classQueueStatusEntry 1.3.6.1.4.1.335.1.2.1.5.10.1
Entry within the table specific to a particular class number defined for the Integration unit.
OBJECT-TYPE    
  ClassQueueStatusEntry  

classQueueStatusClassNum 1.3.6.1.4.1.335.1.2.1.5.10.1.1
Identifies the class number to index connection queue channels for the Integration unit.
OBJECT-TYPE    
  INTEGER 1..64  

classQueueStatusChCount 1.3.6.1.4.1.335.1.2.1.5.10.1.2
Indicates the number of queue channels defined for a particular class connection for the Integration unit.
OBJECT-TYPE    
  INTEGER  

classChannelStatusTable 1.3.6.1.4.1.335.1.2.1.5.11
Table to indicate current queue status of the configured classes. Should all the class channels be busy when the channel request a class, that channel is put in waiting queue on first-come, first-serve basis.
OBJECT-TYPE    
  SEQUENCE OF  
    ClassChannelStatusEntry

classChannelStatusEntry 1.3.6.1.4.1.335.1.2.1.5.11.1
An entry for a specified class number that indicates the current location in the queue.
OBJECT-TYPE    
  ClassChannelStatusEntry  

classChannelStatusClassNum 1.3.6.1.4.1.335.1.2.1.5.11.1.1
Identifies the class number for which the channels are in queue.
OBJECT-TYPE    
  INTEGER 1..64  

classQueueStatusChannelIndex 1.3.6.1.4.1.335.1.2.1.5.11.1.2
Identifies all the channels in the queue for a particular class.
OBJECT-TYPE    
  INTEGER  

classChannelStatusNode 1.3.6.1.4.1.335.1.2.1.5.11.1.3
The node number of the channel waiting in the queue.
OBJECT-TYPE    
  INTEGER  

classChannelStatusChannel 1.3.6.1.4.1.335.1.2.1.5.11.1.4
The port number of the channel waiting in the queue.
OBJECT-TYPE    
  INTEGER  

classChannelStatusCard 1.3.6.1.4.1.335.1.2.1.5.11.1.5
The module/card number of the channel waiting in the queue.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusTable 1.3.6.1.4.1.335.1.2.1.5.12
Table of CCM flash memory status.
OBJECT-TYPE    
  SEQUENCE OF  
    FlashMemoryStatusEntry

flashMemoryStatusEntry 1.3.6.1.4.1.335.1.2.1.5.12.1
Entry within the table specific to a particular flash bank (1 or 2) for flash memory status.
OBJECT-TYPE    
  FlashMemoryStatusEntry  

flashMemoryStatusFlashNumber 1.3.6.1.4.1.335.1.2.1.5.12.1.1
Identifies the flash memory bank for status; 1 or 2.
OBJECT-TYPE    
  INTEGER 1..2  

flashMemoryStatusFileHeaderSize 1.3.6.1.4.1.335.1.2.1.5.12.1.2
Indicates the size of the file header in flash memory.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusFileType 1.3.6.1.4.1.335.1.2.1.5.12.1.3
Indicates the type of data stored in the flash memory bank.
OBJECT-TYPE    
  INTEGER compressed(1), uncompressed(2), erased(3)  

flashMemoryStatusMarathonImageSize 1.3.6.1.4.1.335.1.2.1.5.12.1.4
Indicates the size of the Integration unit file image (following the header).
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusCreationHours 1.3.6.1.4.1.335.1.2.1.5.12.1.5
Indicates the Hours portion of the creation date/time of the Integration unit binary image file.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusCreationMinutes 1.3.6.1.4.1.335.1.2.1.5.12.1.6
Indicates the Minutes portion of the creation date/time of the Integration unit binary image file.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusCreationSeconds 1.3.6.1.4.1.335.1.2.1.5.12.1.7
Indicates the Seconds portion of the creation date/time of the Integration unit binary image file.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusCreationYear 1.3.6.1.4.1.335.1.2.1.5.12.1.8
Indicates the Year portion of the creation date/time of the Integration unit binary image file.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusCreationMonth 1.3.6.1.4.1.335.1.2.1.5.12.1.9
Indicates the Month portion of the creation date/time of the Integration unit binary image file.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusCreationDay 1.3.6.1.4.1.335.1.2.1.5.12.1.10
Indicates the Day portion of the creation date/time of the Integration unit binary image file.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusImageChecksum 1.3.6.1.4.1.335.1.2.1.5.12.1.11
Indicates the image checksum of the Integration unit image file.
OBJECT-TYPE    
  INTEGER  

flashMemoryStatusPromID 1.3.6.1.4.1.335.1.2.1.5.12.1.12
Indicates the Prom ID file identifier of the Integration unit image file.
OBJECT-TYPE    
  DisplayString SIZE(0..19)  

chForceConnStatusTable 1.3.6.1.4.1.335.1.2.1.5.13
Table of channel force connects status. Note that the table will be incomplete for Digital Voice modules (DVM) if the modules are not contiguous on the T1, E1, or Digital Voice Expansion modules. (Ex. - B1, B2, B5; table will only show B1 and B2, not B5.)
OBJECT-TYPE    
  SEQUENCE OF  
    ChForceConnStatusEntry

chForceConnStatusEntry 1.3.6.1.4.1.335.1.2.1.5.13.1
Entry within the table specific to a particular channel number and module/card number for channel force connection status.
OBJECT-TYPE    
  ChForceConnStatusEntry  

chForceConnStatusCardNumber 1.3.6.1.4.1.335.1.2.1.5.13.1.1
Identifies the module/card number of the source channel for channel force connection status.
OBJECT-TYPE    
  INTEGER 1..5  

chForceConnStatusChannelNumber 1.3.6.1.4.1.335.1.2.1.5.13.1.2
Identifies the source channel number for channel force connection status.
OBJECT-TYPE    
  INTEGER 1..32  

chForceConnStatusNodeNumber 1.3.6.1.4.1.335.1.2.1.5.13.1.3
Indicates the Node ID # of the source channel for channel force connection status.
OBJECT-TYPE    
  INTEGER 1..255  

chForceConnStatusToNodeNumber 1.3.6.1.4.1.335.1.2.1.5.13.1.4
Indicates the Node ID # of the destination channel for channel force connection status.
OBJECT-TYPE    
  INTEGER 1..255  

chForceConnStatusToCardNumber 1.3.6.1.4.1.335.1.2.1.5.13.1.5
Identifies the module/card number of the destination channel for channel force connection status.
OBJECT-TYPE    
  INTEGER 1..5  

chForceConnStatusToChannelNumber 1.3.6.1.4.1.335.1.2.1.5.13.1.6
Identifies the destination channel number for channel force connection status.
OBJECT-TYPE    
  INTEGER 1..32  

statistics 1.3.6.1.4.1.335.1.2.1.6
OBJECT IDENTIFIER    

statistics-configuration 1.3.6.1.4.1.335.1.2.1.6.1
OBJECT IDENTIFIER    

sysPeriodicStatisticsReportGroup 1.3.6.1.4.1.335.1.2.1.6.1.1
OBJECT IDENTIFIER    

sysPeriodicStatisticsReportInterval 1.3.6.1.4.1.335.1.2.1.6.1.1.1
Time interval (in minutes) to collect data for a periodic statistics report.
OBJECT-TYPE    
  INTEGER zero(1), ten(2), twenty(3), thirty(4), sixty(5)  

sysReportDestination 1.3.6.1.4.1.335.1.2.1.6.1.1.2
Destination for statistics reports to be routed.
OBJECT-TYPE    
  INTEGER localCommandPort(1), localLogPort(2), remoteNode(3)  

sysRemoteLogNodeName 1.3.6.1.4.1.335.1.2.1.6.1.2
Remote Marathon Node name for log output and periodic statistics reports to be routed.
OBJECT-TYPE    
  DisplayString SIZE(0..8)  

lastPeriodicStatisticsTimeGroup 1.3.6.1.4.1.335.1.2.1.6.1.3
OBJECT IDENTIFIER    

lastPeriodicStatisticsTimeMonth 1.3.6.1.4.1.335.1.2.1.6.1.3.1
Month portion of time stamp of last periodic report stored by the Marathon Node.
OBJECT-TYPE    
  INTEGER 1..12  

lastPeriodicStatisticsTimeDay 1.3.6.1.4.1.335.1.2.1.6.1.3.2
Day portion of time stamp of last periodic report stored by the Marathon Node.
OBJECT-TYPE    
  INTEGER 1..31  

lastPeriodicStatisticsTimeHours 1.3.6.1.4.1.335.1.2.1.6.1.3.3
Hours portion of time stamp of last periodic report stored by the Marathon Node.
OBJECT-TYPE    
  INTEGER 0..23  

lastPeriodicStatisticsTimeMinutes 1.3.6.1.4.1.335.1.2.1.6.1.3.4
Minutes portion of time stamp of last periodic report stored by the Marathon Node.
OBJECT-TYPE    
  INTEGER 0..59  

lastPeriodicStatisticsTimeSeconds 1.3.6.1.4.1.335.1.2.1.6.1.3.5
Seconds portion of time stamp of last periodic report stored by the Marathon Node.
OBJECT-TYPE    
  INTEGER 0..59  

switchStatistics 1.3.6.1.4.1.335.1.2.1.6.1.4
Enable/disable Switch statistics as part of the system statistics periodic report. Switch statistics are class number, name, number of connects, connect failures, and max number in queue.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

statistics-periodic 1.3.6.1.4.1.335.1.2.1.6.2
OBJECT IDENTIFIER    

chPeriodicStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.2.1
Table of channel statistics for periodic statistics reports. (Sync & Async channels)
OBJECT-TYPE    
  SEQUENCE OF  
    ChPeriodicStatisticsEntry

chPeriodicStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.2.1.1
Entry within the table to specify a particular channel on specific module/card.
OBJECT-TYPE    
  ChPeriodicStatisticsEntry  

chPeriodicStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.2.1.1.1
Identifies the module/card number for the channel specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

chPeriodicStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.2.1.1.2
Identifies the channel number specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER  

chPeriodicStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.2.1.1.3
Month portion of the time stamp for the channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

chPeriodicStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.2.1.1.4
Day portion of the time stamp for the channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

chPeriodicStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.2.1.1.5
Hours portion of the time stamp for the channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

chPeriodicStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.2.1.1.6
Minutes portion of the time stamp for the channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

chPeriodicStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.2.1.1.7
Seconds portion of the time stamp for the channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

chPeriodicStatisticsBuffUtilization 1.3.6.1.4.1.335.1.2.1.6.2.1.1.8
The buffer utilization (percentage) of the specified channel in the periodic statistics report. Valid only for Async channels, always 0 for Sync channels
OBJECT-TYPE    
  Gauge  

chPeriodicStatisticsChannelBusiedOut 1.3.6.1.4.1.335.1.2.1.6.2.1.1.9
The busied-out condition (yes/no) of the specified channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

chPeriodicStatisticsChannelInFlowControl 1.3.6.1.4.1.335.1.2.1.6.2.1.1.10
The flow control condition (yes/no = fcn of buffer utilizaton) of the specified channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

chVPeriodicStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.2.2
Table of voice channel statistics for periodic statistics reports.
OBJECT-TYPE    
  SEQUENCE OF  
    ChVPeriodicStatisticsEntry

chVPeriodicStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.2.2.1
Entry within the table to specify a particular voice channel on specific voice module/card.
OBJECT-TYPE    
  ChVPeriodicStatisticsEntry  

chVPeriodicStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.2.2.1.1
Identifies the voice module/card number for the voice channel specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER 2..5  

chVPeriodicStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.2.2.1.2
Identifies the voice channel number specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER  

chVPeriodicStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.2.2.1.3
Month portion of the time stamp for the voice channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

chVPeriodicStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.2.2.1.4
Day portion of the time stamp for the voice channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

chVPeriodicStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.2.2.1.5
Hours portion of the time stamp for the voice channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

chVPeriodicStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.2.2.1.6
Minutes portion of the time stamp for the voice channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

chVPeriodicStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.2.2.1.7
Seconds portion of the time stamp for the voice channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

chVPeriodicStatisticsConnectTime 1.3.6.1.4.1.335.1.2.1.6.2.2.1.8
Connect time of the specified voice channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

chVPeriodicStatisticsTotalCalls 1.3.6.1.4.1.335.1.2.1.6.2.2.1.9
Total calls recorded on the specified voice channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

chVPeriodicStatisticsAvgCallDuration 1.3.6.1.4.1.335.1.2.1.6.2.2.1.10
Average call duration of the specified voice channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

chVPeriodicStatisticsBusyOutTime 1.3.6.1.4.1.335.1.2.1.6.2.2.1.11
Busy Out time of the specified voice channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

chVPeriodicStatisticsNumOfCallAttempts 1.3.6.1.4.1.335.1.2.1.6.2.2.1.12
Number of call attempts of the specified voice channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

chVPeriodicStatisticsDiscardedFrameCounts 1.3.6.1.4.1.335.1.2.1.6.2.2.1.13
Number of times voice frames were discarded on the specified voice channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

chVPeriodicStatisticsTimeInFaxMode 1.3.6.1.4.1.335.1.2.1.6.2.2.1.14
The time spent in Fax mode of the specified voice channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

chVPeriodicStatisticsPercentInFaxMode 1.3.6.1.4.1.335.1.2.1.6.2.2.1.15
The percentage of time spent in Fax mode of the specified voice channel in the periodic statistics report.
OBJECT-TYPE    
  Gauge  

linkPeriodicStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.2.3
Table of link statistics for periodic statistics reports. (all link types except Frame Relay)
OBJECT-TYPE    
  SEQUENCE OF  
    LinkPeriodicStatisticsEntry

linkPeriodicStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.2.3.1
Entry within the table to specify a particular link channel on specific module/card.
OBJECT-TYPE    
  LinkPeriodicStatisticsEntry  

linkPeriodicStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.2.3.1.1
Identifies the module/card number for the link channel specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

linkPeriodicStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.2.3.1.2
Identifies the link channel number specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER  

linkPeriodicStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.2.3.1.3
Month portion of the time stamp for the link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

linkPeriodicStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.2.3.1.4
Day portion of the time stamp for the link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

linkPeriodicStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.2.3.1.5
Hours portion of the time stamp for the link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

linkPeriodicStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.2.3.1.6
Minutes portion of the time stamp for the link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkPeriodicStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.2.3.1.7
Seconds portion of the time stamp for the link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkPeriodicStatisticsLinkType 1.3.6.1.4.1.335.1.2.1.6.2.3.1.8
Link type of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER esm(1), esi(2), xDot21(3), localEsi(4), esiSecondary(5), frameRelay(6)  

linkPeriodicStatisticsTxFrames 1.3.6.1.4.1.335.1.2.1.6.2.3.1.9
Transmitted frames (x100) of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkPeriodicStatisticsRxFrames 1.3.6.1.4.1.335.1.2.1.6.2.3.1.10
Received frames (x100) of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkPeriodicStatisticsLocCompositeUtil 1.3.6.1.4.1.335.1.2.1.6.2.3.1.11
Local composite utilization (percentage) of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  Gauge  

linkPeriodicStatisticsRemCompositeUtil 1.3.6.1.4.1.335.1.2.1.6.2.3.1.12
Remote composite utilization (percentage) of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  Gauge  

linkPeriodicStatisticsLocBufferUtil 1.3.6.1.4.1.335.1.2.1.6.2.3.1.13
Local buffer utilization (percentage) of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  Gauge  

linkPeriodicStatisticsRemBufferUtil 1.3.6.1.4.1.335.1.2.1.6.2.3.1.14
Remote buffer utilization (percentage) of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  Gauge  

linkPeriodicStatisticsLocRetransmits 1.3.6.1.4.1.335.1.2.1.6.2.3.1.15
Local retransmits of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkPeriodicStatisticsRemRetransmits 1.3.6.1.4.1.335.1.2.1.6.2.3.1.16
Remote retransmits of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkPeriodicStatisticsLocLineAlarms 1.3.6.1.4.1.335.1.2.1.6.2.3.1.17
Local line alarms of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkPeriodicStatisticsRemLineAlarms 1.3.6.1.4.1.335.1.2.1.6.2.3.1.18
Remote line alarms of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkPeriodicStatisticsLocTimeInSysFlowCtrl 1.3.6.1.4.1.335.1.2.1.6.2.3.1.19
Local time (seconds) in system flow control of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkPeriodicStatisticsRemTimeInSysFlowCtrl 1.3.6.1.4.1.335.1.2.1.6.2.3.1.20
Remote time (seconds) in system flow control of the specified link channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkPeriodicStatisticsLocTimeInSyncLossOrX21Connect 1.3.6.1.4.1.335.1.2.1.6.2.3.1.21
Local time (seconds) in sync loss of the specified link channel in the periodic statistics report. (not used on X.21 links)
OBJECT-TYPE    
  INTEGER  

linkPeriodicStatisticsRemTimeInSyncLoss 1.3.6.1.4.1.335.1.2.1.6.2.3.1.22
Remote time (seconds) in sync loss of the specified link channel in the periodic statistics report. (not used on X.21 links)
OBJECT-TYPE    
  INTEGER  

linkPeriodicStatisticsLocTimeInCarrierLoss 1.3.6.1.4.1.335.1.2.1.6.2.3.1.23
Local time (seconds) in carrier loss of the specified link channel in the periodic statistics report. (not used on X.21 links)
OBJECT-TYPE    
  INTEGER  

linkPeriodicStatisticsRemTimeInCarrierLoss 1.3.6.1.4.1.335.1.2.1.6.2.3.1.24
Remote time (seconds) in carrier loss of the specified link channel in the periodic statistics report. (not used on X.21 links)
OBJECT-TYPE    
  INTEGER  

linkFRPeriodicStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.2.4
Table of Frame Relay link statistics for periodic statistics reports. (Note: More periodic FR link stats are contained in table linkFRAccLnkPeriodicStatisticsTable.)
OBJECT-TYPE    
  SEQUENCE OF  
    LinkFRPeriodicStatisticsEntry

linkFRPeriodicStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.2.4.1
Entry within the table to specify a particular FR link channel on specific module/card.
OBJECT-TYPE    
  LinkFRPeriodicStatisticsEntry  

linkFRPeriodicStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.2.4.1.1
Identifies the module/card number for the FR link channel specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

linkFRPeriodicStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.2.4.1.2
Identifies the FR link channel number specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER  

linkFRPeriodicStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.2.4.1.3
Month portion of the time stamp for the FR link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRPeriodicStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.2.4.1.4
Day portion of the time stamp for the FR link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRPeriodicStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.2.4.1.5
Hours portion of the time stamp for the FR link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRPeriodicStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.2.4.1.6
Minutes portion of the time stamp for the FR link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRPeriodicStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.2.4.1.7
Seconds portion of the time stamp for the FR link channel periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRPeriodicStatisticsCRCErrs 1.3.6.1.4.1.335.1.2.1.6.2.4.1.8
CRC errors on the specified FR link access channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRPeriodicStatisticsLostStatusMsgCounts 1.3.6.1.4.1.335.1.2.1.6.2.4.1.9
Lost status messsage count of the specified FR link channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRPeriodicStatisticsStatusMsgProtocolErrs 1.3.6.1.4.1.335.1.2.1.6.2.4.1.10
Status message protocol errors of the specified FR link channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRPeriodicStatisticsNetworkResets 1.3.6.1.4.1.335.1.2.1.6.2.4.1.11
Resets initiated by the network of the specified FR link channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRPeriodicStatisticsLinkResets 1.3.6.1.4.1.335.1.2.1.6.2.4.1.12
Resets initiated by the Marathon of the specified FR link channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRPeriodicStatisticsNumOfDLCIs 1.3.6.1.4.1.335.1.2.1.6.2.4.1.13
Number of configured DLCIs for the specified FR link channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIPeriodicStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.2.5
Table of Frame Relay link DLCI channel statistics for periodic statistics reports.
OBJECT-TYPE    
  SEQUENCE OF  
    LinkFRDLCIPeriodicStatisticsEntry

linkFRDLCIPeriodicStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.2.5.1
Entry within the table to specify a particular FR link channel on specific module/card for specific DLCI number.
OBJECT-TYPE    
  LinkFRDLCIPeriodicStatisticsEntry  

linkFRDLCIPeriodicStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.2.5.1.1
Identifies the module/card number for the FR link channel and DLCI number specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

linkFRDLCIPeriodicStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.2.5.1.2
Identifies the FR link channel number for the DLCI number specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIPeriodicStatisticsDLCINumber 1.3.6.1.4.1.335.1.2.1.6.2.5.1.3
Identifies the DCLI number specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIPeriodicStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.2.5.1.4
Month portion of the time stamp for the FR link DLCI periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

linkFRDLCIPeriodicStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.2.5.1.5
Days portion of the time stamp for the FR link DLCI periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

linkFRDLCIPeriodicStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.2.5.1.6
Hours portion of the time stamp for the FR link DLCI periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

linkFRDLCIPeriodicStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.2.5.1.7
Minutes portion of the time stamp for the FR link DLCI periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkFRDLCIPeriodicStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.2.5.1.8
Seconds portion of the time stamp for the FR link DLCI periodic statistics report..
OBJECT-TYPE    
  INTEGER 0..59  

linkFRDLCIPeriodicStatisticsTxCharacters 1.3.6.1.4.1.335.1.2.1.6.2.5.1.9
Transmitted character count of the specified DLCI in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRDLCIPeriodicStatisticsRxCharacters 1.3.6.1.4.1.335.1.2.1.6.2.5.1.10
Received character count of the specified DLCI in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRDLCIPeriodicStatisticsTxFrames 1.3.6.1.4.1.335.1.2.1.6.2.5.1.11
Transmitted frames count of the specified DLCI in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRDLCIPeriodicStatisticsRxFrames 1.3.6.1.4.1.335.1.2.1.6.2.5.1.12
Received frames count of the specified DLCI in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRDLCIPeriodicStatisticsTimeActive 1.3.6.1.4.1.335.1.2.1.6.2.5.1.13
Time active (seconds) of the specified DLCI in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIPeriodicStatisticsTimeCongestedForward 1.3.6.1.4.1.335.1.2.1.6.2.5.1.14
Time congested forward (seconds) of the specified DLCI in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIPeriodicStatisticsTimeCongestedBackward 1.3.6.1.4.1.335.1.2.1.6.2.5.1.15
Time congested backward (seconds) of the specified DLCI in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

swPeriodicStatisticsNumOfCurrentConnects 1.3.6.1.4.1.335.1.2.1.6.2.6
Number of current connects for the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

swPeriodicStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.2.7
Table of switch statistics for periodic statistics reports.
OBJECT-TYPE    
  SEQUENCE OF  
    SwPeriodicStatisticsEntry

swPeriodicStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.2.7.1
Entry within the table to specify a particular class number.
OBJECT-TYPE    
  SwPeriodicStatisticsEntry  

swPeriodicStatisticsClassNumber 1.3.6.1.4.1.335.1.2.1.6.2.7.1.1
Identifies the class number for periodic statistics report data.
OBJECT-TYPE    
  INTEGER  

swPeriodicStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.2.7.1.2
Month portion of the time stamp for the switch statistics periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

swPeriodicStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.2.7.1.3
Day portion of the time stamp for the switch statistics periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

swPeriodicStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.2.7.1.4
Hours portion of the time stamp for the switch statistics periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

swPeriodicStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.2.7.1.5
Minutes portion of the time stamp for the switch statistics periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

swPeriodicStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.2.7.1.6
Seconds portion of the time stamp for the switch statistics periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

swPeriodicStatisticsNumOfSuccessfulConnects 1.3.6.1.4.1.335.1.2.1.6.2.7.1.7
Number of successful connects for the switch statistics periodic statistics report.
OBJECT-TYPE    
  Counter  

swPeriodicStatisticsNumOfUnsuccessfulAttempts 1.3.6.1.4.1.335.1.2.1.6.2.7.1.8
Number of unsuccessful connects (attempts) for the switch statistics periodic statistics report.
OBJECT-TYPE    
  Counter  

swPeriodicStatisticsMaxNumInQueue 1.3.6.1.4.1.335.1.2.1.6.2.7.1.9
Maximum number in the queue during report period for the switch statistics periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccLnkPeriodicStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.2.8
Table of Frame Relay link access channel statistics for periodic statistics reports. (Note: More periodic FR link stats are contained in table linkFRPeriodicStatisticsTable.)
OBJECT-TYPE    
  SEQUENCE OF  
    LinkFRPeriodicStatisticsEntry

linkFRAccLnkPeriodicStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.2.8.1
Entry within the table to specify a particular FR link access channel on specific module/card.
OBJECT-TYPE    
  LinkFRAccLnkPeriodicStatisticsEntry  

linkFRAccLnkPeriodicStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.2.8.1.1
Identifies the module/card number for the FR link access channel specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

linkFRAccLnkPeriodicStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.2.8.1.2
Identifies the FR link access channel number specific to the periodic statistics report data.
OBJECT-TYPE    
  INTEGER  

linkFRAccLnkPeriodicStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.2.8.1.3
Month portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

linkFRAccLnkPeriodicStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.2.8.1.4
Day portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

linkFRAccLnkPeriodicStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.2.8.1.5
Hours portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

linkFRAccLnkPeriodicStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.2.8.1.6
Minutes portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkFRAccLnkPeriodicStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.2.8.1.7
Seconds portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkFRAccLnkPeriodicStatisticsLocalCompositeUtilization 1.3.6.1.4.1.335.1.2.1.6.2.8.1.8
Local composite utilization (percentage) of the specified FR link access channel in the periodic statistics report.
OBJECT-TYPE    
  Gauge  

linkFRAccLnkPeriodicStatisticsLocalBufferUtilization 1.3.6.1.4.1.335.1.2.1.6.2.8.1.9
Local buffer utilization (percentage) of the specified FR link access channel in the periodic statistics report.
OBJECT-TYPE    
  Gauge  

linkFRAccLnkPeriodicStatisticsLocalLineAlarms 1.3.6.1.4.1.335.1.2.1.6.2.8.1.10
Local line alarms of the specified FR link access channel in the periodic statistics report.
OBJECT-TYPE    
  Counter  

linkFRAccLnkPeriodicStatisticsLocalSecInSysFlowControl 1.3.6.1.4.1.335.1.2.1.6.2.8.1.11
Local seconds in system flow control of the specified FR link access channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccLnkPeriodicStatisticsLocalSecInSyncLoss 1.3.6.1.4.1.335.1.2.1.6.2.8.1.12
Local seconds in sync loss of the specified FR link access channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccLnkPeriodicStatisticsLocalSecInCarrierLoss 1.3.6.1.4.1.335.1.2.1.6.2.8.1.13
Local seconds in carrier loss of the specified FR link access channel in the periodic statistics report.
OBJECT-TYPE    
  INTEGER  

statistics-accumulated 1.3.6.1.4.1.335.1.2.1.6.3
OBJECT IDENTIFIER    

chAccumStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.3.1
Table of channel statistics for accumlulated statistics reports. (Sync & Async channels).
OBJECT-TYPE    
  SEQUENCE OF  
    ChAccumStatisticsEntry

chAccumStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.3.1.1
Entry within the table to specify a particular channel on specific module/card.
OBJECT-TYPE    
  ChAccumStatisticsEntry  

chAccumStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.3.1.1.1
Identifies the module/card number for the channel specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

chAccumStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.3.1.1.2
Identifies the channel number specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER  

chAccumStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.3.1.1.3
Month portion of the time stamp for the channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

chAccumStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.3.1.1.4
Day portion of the time stamp for the channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

chAccumStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.3.1.1.5
Hours portion of the time stamp for the channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

chAccumStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.3.1.1.6
Minutes portion of the time stamp for the channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

chAccumStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.3.1.1.7
Seconds portion of the time stamp for the channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

chAccumStatisticsBuffUtilization 1.3.6.1.4.1.335.1.2.1.6.3.1.1.8
The buffer utilization (percentage) of the specified channel in the accumulated statistics report. Valid only for Async channels, always 0 for Sync channels
OBJECT-TYPE    
  Gauge  

chAccumStatisticsChannelBusiedOut 1.3.6.1.4.1.335.1.2.1.6.3.1.1.9
The busied-out condition (yes/no) of the specified channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

chAccumStatisticsChannelInFlowControl 1.3.6.1.4.1.335.1.2.1.6.3.1.1.10
The flow control condition (yes/no = fcn of buffer utilizaton) of the specified channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

chVAccumStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.3.2
Table of voice channel statistics for accumulated statistics reports.
OBJECT-TYPE    
  SEQUENCE OF  
    ChVAccumStatisticsEntry

chVAccumStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.3.2.1
Entry within the table to specify a particular voice channel on specific voice module/card.
OBJECT-TYPE    
  ChVAccumStatisticsEntry  

chVAccumStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.3.2.1.1
Identifies the voice module/card number for the voice channel specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER 2..5  

chVAccumStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.3.2.1.2
Identifies the voice channel number specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER  

chVAccumStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.3.2.1.3
Month portion of the time stamp for the voice channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

chVAccumStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.3.2.1.4
Day portion of the time stamp for the voice channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

chVAccumStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.3.2.1.5
Hours portion of the time stamp for the voice channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

chVAccumStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.3.2.1.6
Minutes portion of the time stamp for the voice channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

chVAccumStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.3.2.1.7
Seconds portion of the time stamp for the voice channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

chVAccumStatisticsConnectTime 1.3.6.1.4.1.335.1.2.1.6.3.2.1.8
Connect time of the specified voice channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

chVAccumStatisticsTotalCalls 1.3.6.1.4.1.335.1.2.1.6.3.2.1.9
Total calls recorded on the specified voice channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

chVAccumStatisticsAvgCallDuration 1.3.6.1.4.1.335.1.2.1.6.3.2.1.10
Average call duration of the specified voice channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

chVAccumStatisticsBusyOutTime 1.3.6.1.4.1.335.1.2.1.6.3.2.1.11
Busy Out time of the specified voice channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

chVAccumStatisticsNumOfCallAttempts 1.3.6.1.4.1.335.1.2.1.6.3.2.1.12
Number of call attempts of the specified voice channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

chVAccumStatisticsDiscardedFrameCounts 1.3.6.1.4.1.335.1.2.1.6.3.2.1.13
Number of times voice frames were discarded on the specified voice channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

chVAccumStatisticsTimeInFaxMode 1.3.6.1.4.1.335.1.2.1.6.3.2.1.14
The time spent in Fax mode of the specified voice channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

chVAccumStatisticsPercentInFaxMode 1.3.6.1.4.1.335.1.2.1.6.3.2.1.15
The percentage of time spent in Fax mode of the specified voice channel in the accumulated statistics report.
OBJECT-TYPE    
  Gauge  

linkAccumStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.3.3
Table of link statistics for accumulated statistics reports. (all link types except Frame Relay).
OBJECT-TYPE    
  SEQUENCE OF  
    LinkAccumStatisticsEntry

linkAccumStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.3.3.1
Entry within the table to specify a particular link channel on specific module/card.
OBJECT-TYPE    
  LinkAccumStatisticsEntry  

linkAccumStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.3.3.1.1
Identifies the module/card number for the link channel specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

linkAccumStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.3.3.1.2
Identifies the link channel number specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER  

linkAccumStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.3.3.1.3
Month portion of the time stamp for the link channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

linkAccumStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.3.3.1.4
Day portion of the time stamp for the link channel accumulated statistics report..
OBJECT-TYPE    
  INTEGER 1..31  

linkAccumStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.3.3.1.5
Hours portion of the time stamp for the link channel accumulated statistics report..
OBJECT-TYPE    
  INTEGER 0..23  

linkAccumStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.3.3.1.6
Minutes portion of the time stamp for the link channel accumulated statistics report..
OBJECT-TYPE    
  INTEGER 0..59  

linkAccumStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.3.3.1.7
Seconds portion of the time stamp for the link channel accumulated statistics report..
OBJECT-TYPE    
  INTEGER 0..59  

linkAccumStatisticsLinkType 1.3.6.1.4.1.335.1.2.1.6.3.3.1.8
Link type of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER esm(1), esi(2), xDot21(3), localEsi(4), esiSecondary(5), frameRelay(6)  

linkAccumStatisticsTxFrames 1.3.6.1.4.1.335.1.2.1.6.3.3.1.9
Transmitted frames (x100) of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkAccumStatisticsRxFrames 1.3.6.1.4.1.335.1.2.1.6.3.3.1.10
Received frames (x100) of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkAccumStatisticsLocCompositeUtil 1.3.6.1.4.1.335.1.2.1.6.3.3.1.11
Local composite utilization (percentage) of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  Gauge  

linkAccumStatisticsRemCompositeUtil 1.3.6.1.4.1.335.1.2.1.6.3.3.1.12
Remote composite utilization (percentage) of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  Gauge  

linkAccumStatisticsLocBufferUtil 1.3.6.1.4.1.335.1.2.1.6.3.3.1.13
Local buffer utilization (percentage) of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  Gauge  

linkAccumStatisticsRemBufferUtil 1.3.6.1.4.1.335.1.2.1.6.3.3.1.14
Remote buffer utilization (percentage) of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  Gauge  

linkAccumStatisticsLocRetransmits 1.3.6.1.4.1.335.1.2.1.6.3.3.1.15
Local retransmits of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkAccumStatisticsRemRetransmits 1.3.6.1.4.1.335.1.2.1.6.3.3.1.16
Remote retransmits of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkAccumStatisticsLocLineAlarms 1.3.6.1.4.1.335.1.2.1.6.3.3.1.17
Local line alarms of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkAccumStatisticsRemLineAlarms 1.3.6.1.4.1.335.1.2.1.6.3.3.1.18
Remote line alarms of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkAccumStatisticsLocTimeInSysFlowCtrl 1.3.6.1.4.1.335.1.2.1.6.3.3.1.19
Local time (seconds) in system flow control of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkAccumStatisticsRemTimeInSysFlowCtrl 1.3.6.1.4.1.335.1.2.1.6.3.3.1.20
Remote time (seconds) in system flow control of the specified link channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkAccumStatisticsLocTimeInSyncLossOrX21Connect 1.3.6.1.4.1.335.1.2.1.6.3.3.1.21
Local time (seconds) in sync loss of the specified link channel in the accumulated statistics report. (not used on X.21 links).
OBJECT-TYPE    
  INTEGER  

linkAccumStatisticsRemTimeInSyncLoss 1.3.6.1.4.1.335.1.2.1.6.3.3.1.22
Remote time (seconds) in sync loss of the specified link channel in the accumulated statistics report. (not used on X.21 links)
OBJECT-TYPE    
  INTEGER  

linkAccumStatisticsLocTimeInCarrierLoss 1.3.6.1.4.1.335.1.2.1.6.3.3.1.23
Local time (seconds) in carrier loss of the specified link channel in the accumulated statistics report. (not used on X.21 links)
OBJECT-TYPE    
  INTEGER  

linkAccumStatisticsRemTimeInCarrierLoss 1.3.6.1.4.1.335.1.2.1.6.3.3.1.24
Remote time (seconds) in carrier loss of the specified link channel in the accumulated statistics report. (not used on X.21 links)
OBJECT-TYPE    
  INTEGER  

linkFRAccumStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.3.4
Table of Frame Relay link statistics for accumulated statistics reports. (Note: More accumulated FR link stats are contained in table linkFRAccLnkAccumStatisticsTable.)
OBJECT-TYPE    
  SEQUENCE OF  
    LinkFRAccumStatisticsEntry

linkFRAccumStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.3.4.1
Entry within the table to specify a particular FR link channel on specific module/card.
OBJECT-TYPE    
  LinkFRAccumStatisticsEntry  

linkFRAccumStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.3.4.1.1
Identifies the module/card number for the FR link channel specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

linkFRAccumStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.3.4.1.2
Identifies the FR link channel number specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER  

linkFRAccumStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.3.4.1.3
Month portion of the time stamp for the FR link channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccumStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.3.4.1.4
Day portion of the time stamp for the FR link channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccumStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.3.4.1.5
Hours portion of the time stamp for the FR link channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccumStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.3.4.1.6
Minutes portion of the time stamp for the FR link channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccumStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.3.4.1.7
Seconds portion of the time stamp for the FR link channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccumStatisticsCRCErrs 1.3.6.1.4.1.335.1.2.1.6.3.4.1.8
CRC errors on the specified FR link access channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRAccumStatisticsLostStatusMsgCounts 1.3.6.1.4.1.335.1.2.1.6.3.4.1.9
Lost status messsage count of the specified FR link channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRAccumStatisticsStatusMsgProtocolErrs 1.3.6.1.4.1.335.1.2.1.6.3.4.1.10
Status message protocol errors of the specified FR link channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRAccumStatisticsNetworkResets 1.3.6.1.4.1.335.1.2.1.6.3.4.1.11
Resets initiated by the network of the specified FR link channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRAccumStatisticsLinkResets 1.3.6.1.4.1.335.1.2.1.6.3.4.1.12
Resets initiated by the Marathon of the specified FR link channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRAccumStatisticsNumOfDLCIs 1.3.6.1.4.1.335.1.2.1.6.3.4.1.13
Number of configured DLCIs for the specified FR link channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIAccumStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.3.5
Table of Frame Relay link DLCI channel statistics for accumulated statistics reports.
OBJECT-TYPE    
  SEQUENCE OF  
    LinkFRDLCIAccumStatisticsEntry

linkFRDLCIAccumStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.3.5.1
Entry within the table to specify a particular FR link channel on specific module/card for specific DLCI number.
OBJECT-TYPE    
  LinkFRDLCIAccumStatisticsEntry  

linkFRDLCIAccumStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.3.5.1.1
Identifies the module/card number for the FR link channel and DLCI number specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

linkFRDLCIAccumStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.3.5.1.2
Identifies the FR link channel number for the DLCI number specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIAccumStatisticsDLCINumber 1.3.6.1.4.1.335.1.2.1.6.3.5.1.3
Identifies the DCLI number specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIAccumStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.3.5.1.4
Month portion of the time stamp for the FR link DLCI accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

linkFRDLCIAccumStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.3.5.1.5
Day portion of the time stamp for the FR link DLCI accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

linkFRDLCIAccumStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.3.5.1.6
Hours portion of the time stamp for the FR link DLCI accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

linkFRDLCIAccumStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.3.5.1.7
Minutes portion of the time stamp for the FR link DLCI accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkFRDLCIAccumStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.3.5.1.8
Seconds portion of the time stamp for the FR link DLCI accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkFRDLCIAccumStatisticsTxCharacters 1.3.6.1.4.1.335.1.2.1.6.3.5.1.9
Transmitted character count of the specified DLCI in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRDLCIAccumStatisticsRxCharacters 1.3.6.1.4.1.335.1.2.1.6.3.5.1.10
Received character count of the specified DLCI in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRDLCIAccumStatisticsTxFrames 1.3.6.1.4.1.335.1.2.1.6.3.5.1.11
Transmitted frames count of the specified DLCI in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRDLCIAccumStatisticsRxFrames 1.3.6.1.4.1.335.1.2.1.6.3.5.1.12
Received frames count of the specified DLCI in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRDLCIAccumStatisticsTimeActive 1.3.6.1.4.1.335.1.2.1.6.3.5.1.13
Time active (seconds) of the specified DLCI in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIAccumStatisticsTimeCongestedForward 1.3.6.1.4.1.335.1.2.1.6.3.5.1.14
Time congested forward (seconds) of the specified DLCI in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRDLCIAccumStatisticsTimeCongestedBackward 1.3.6.1.4.1.335.1.2.1.6.3.5.1.15
Time congested backward (seconds) of the specified DLCI in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

swAccumStatisticsNumOfCurrentConnects 1.3.6.1.4.1.335.1.2.1.6.3.6
Number of current connects for the accumulated statistics report.
OBJECT-TYPE    
  Counter  

swAccumStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.3.7
Table of switch statistics for accumulated statistics reports.
OBJECT-TYPE    
  SEQUENCE OF  
    SwAccumStatisticsEntry

swAccumStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.3.7.1
Entry within the table to specify a particular class number.
OBJECT-TYPE    
  SwAccumStatisticsEntry  

swAccumStatisticsClassNumber 1.3.6.1.4.1.335.1.2.1.6.3.7.1.1
Identifies the class number for accumulated statistics report data.
OBJECT-TYPE    
  INTEGER  

swAccumStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.3.7.1.2
Month portion of the time stamp for the switch statistics accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

swAccumStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.3.7.1.3
Day portion of the time stamp for the switch statistics accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

swAccumStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.3.7.1.4
Hours portion of the time stamp for the switch statistics accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

swAccumStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.3.7.1.5
Minutes portion of the time stamp for the switch statistics accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

swAccumStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.3.7.1.6
Seconds portion of the time stamp for the switch statistics accumulated statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

swAccumStatisticsNumOfSuccessfulConnects 1.3.6.1.4.1.335.1.2.1.6.3.7.1.7
Number of successful connects for the switch statistics accumulated statistics report.
OBJECT-TYPE    
  Counter  

swAccumStatisticsNumOfUnsuccessfulAttempts 1.3.6.1.4.1.335.1.2.1.6.3.7.1.8
Number of unsuccessful connects (attempts) for the switch statistics accumulated statistics report.
OBJECT-TYPE    
  Counter  

swAccumStatisticsMaxNumInQueue 1.3.6.1.4.1.335.1.2.1.6.3.7.1.9
Maximum number in the queue during report period for the switch statistics accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccLnkAccumStatisticsTable 1.3.6.1.4.1.335.1.2.1.6.3.8
Table of Frame Relay link access channel statistics for accumulated statistics reports. (Note: More accumulated FR link stats are contained in table linkFRAccumStatisticsTable.)
OBJECT-TYPE    
  SEQUENCE OF  
    LinkFRAccLnkAccumStatisticsEntry

linkFRAccLnkAccumStatisticsEntry 1.3.6.1.4.1.335.1.2.1.6.3.8.1
Entry within the table to specify a particular FR link access channel on specific module/card.
OBJECT-TYPE    
  LinkFRAccLnkAccumStatisticsEntry  

linkFRAccLnkAccumStatisticsCardNumber 1.3.6.1.4.1.335.1.2.1.6.3.8.1.1
Identifies the module/card number for the FR link access channel specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER 1..5  

linkFRAccLnkAccumStatisticsChannelNumber 1.3.6.1.4.1.335.1.2.1.6.3.8.1.2
Identifies the FR link access channel number specific to the accumulated statistics report data.
OBJECT-TYPE    
  INTEGER  

linkFRAccLnkAccumStatisticsMonth 1.3.6.1.4.1.335.1.2.1.6.3.8.1.3
Month portion of the time stamp for the FR link access channel accumulated statistics report.
OBJECT-TYPE    
  INTEGER 1..12  

linkFRAccLnkAccumStatisticsDay 1.3.6.1.4.1.335.1.2.1.6.3.8.1.4
Day portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 1..31  

linkFRAccLnkAccumStatisticsHours 1.3.6.1.4.1.335.1.2.1.6.3.8.1.5
Hours portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..23  

linkFRAccLnkAccumStatisticsMinutes 1.3.6.1.4.1.335.1.2.1.6.3.8.1.6
Minutes portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkFRAccLnkAccumStatisticsSeconds 1.3.6.1.4.1.335.1.2.1.6.3.8.1.7
Seconds portion of the time stamp for the FR link access channel periodic statistics report.
OBJECT-TYPE    
  INTEGER 0..59  

linkFRAccLnkAccumStatisticsLocalCompositeUtilization 1.3.6.1.4.1.335.1.2.1.6.3.8.1.8
Local composite utilization (percentage) of the specified FR link access channel in the accumulated statistics report.
OBJECT-TYPE    
  Gauge  

linkFRAccLnkAccumStatisticsLocalBufferUtilization 1.3.6.1.4.1.335.1.2.1.6.3.8.1.9
Local composite utilization (percentage) of the specified FR link access channel in the accumulated statistics report.
OBJECT-TYPE    
  Gauge  

linkFRAccLnkAccumStatisticsLocalLineAlarms 1.3.6.1.4.1.335.1.2.1.6.3.8.1.10
Local line alarms of the specified FR link access channel in the accumulated statistics report.
OBJECT-TYPE    
  Counter  

linkFRAccLnkAccumStatisticsLocalSecInSysFlowControl 1.3.6.1.4.1.335.1.2.1.6.3.8.1.11
Local seconds in system flow control of the specified FR link access channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccLnkAccumStatisticsLocalSecInSyncLoss 1.3.6.1.4.1.335.1.2.1.6.3.8.1.12
Local seconds in sync loss of the specified FR link access channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

linkFRAccLnkAccumStatisticsLocalSecInCarrierLoss 1.3.6.1.4.1.335.1.2.1.6.3.8.1.13
Local seconds in carrier loss of the specified FR link access channel in the accumulated statistics report.
OBJECT-TYPE    
  INTEGER  

mcmEventDisconnect 1.3.6.1.4.1.335.2
The connection between the specified pair of unit ports has been broken.
TRAP-TYPE    
  trapFirstNodeName  
  trapFirstCardNumberOrInternalFacilityIndication  
  trapFirstChannelNumberOrInternalFacility  
  trapSecondNodeName  
  trapSecondCardNumberOrInternalFacilityIndication  
  trapSecondChannelNumberOrInternalFacility  

mcmEventQueueEntry 1.3.6.1.4.1.335.3
A port has been placed in a first-come first-served queue for the next available port in the requested class.
TRAP-TYPE    
  trapNodeName  
  trapChannelNumber  
  trapCardNumber  
  trapClassRequestedOrMatrixRequest  

mcmEventCallFail 1.3.6.1.4.1.335.4
A matrix connection made by the local port did not complete successfully (for example, the password was incorrect).
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapClassRequestedOrMatrixRequest  

mcmEventDDSInService 1.3.6.1.4.1.335.5
The unit's ISU module is back in service, and the associated link is up.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventDDSOutService 1.3.6.1.4.1.335.6
The unit's ISU module is out of service, and the associated link is down.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventDDSLoopTest 1.3.6.1.4.1.335.7
The telephone company has placed the unit's ISU module into a loop test mode.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBConnectMade 1.3.6.1.4.1.335.8
The unit's modem module has completed a dial backup connection, and the associated link is up.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBConnectDrop 1.3.6.1.4.1.335.9
The unit's modem module has dropped the dial line connection due to bad lines, Data Terminal Ready dropped, or Carrier Detect lost. As a result, the associated link is down.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventForcedDialMode 1.3.6.1.4.1.335.10
The unit's modem module has been placed into the forced dial mode. The associated link will always be established over the dial lines.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventForcedLeaseMode 1.3.6.1.4.1.335.11
The unit's modem module has been placed into the forced lease mode. The associated link will always be established over the lease lines; no dial backup can occur.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventLeasedConnect 1.3.6.1.4.1.335.12
The unit's modem module has established communications over the lease lines, and the associated link is up.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventLeaseLineRetry 1.3.6.1.4.1.335.13
The unit's modem module has started operating on the lease lines while the dial line connection is still established.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventLinkRestart 1.3.6.1.4.1.335.14
Communications on the local side of the associated link have been restarted.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmEventRemoteLinkRestart 1.3.6.1.4.1.335.15
Communications on the remote end of the specified link have been restarted.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmEventNoADBNumber 1.3.6.1.4.1.335.16
No number has been configured for auto dial backup for the specified link.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBNoRXDialTone 1.3.6.1.4.1.335.17
The dial backup function on the unit's modem module went off-hook on the Rx line, and a dial tone was not detected.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBNoTxDialTone 1.3.6.1.4.1.335.18
The dial backup function on the unit's modem module went off-hook on the Tx line, and a dial tone was not detected.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBRxDialing 1.3.6.1.4.1.335.19
The dial backup function on the unit's modem module is dialing the telephone number for the Rx line.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBTxDialing 1.3.6.1.4.1.335.20
The dial backup function on the unit's modem module is dialing the telephone number for the Tx line.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBNoAnswer 1.3.6.1.4.1.335.21
The dial backup function on the unit's modem module did not receive an answer tone after placing a call on a dial line.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBRxBusy 1.3.6.1.4.1.335.22
The dial backup function on the unit's modem module has detected a busy signal on the Rx dial line.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBTxBusy 1.3.6.1.4.1.335.23
The dial backup function on the unit's modem module has detected a busy signal on the Tx dial line.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBRxRinging 1.3.6.1.4.1.335.24
The dial backup function on the unit's modem module has detected an incoming call on the Rx dial line.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBTxRinging 1.3.6.1.4.1.335.25
The dial backup function on the unit's modem module has detected an incoming call on the Tx dial line.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBRingDetect 1.3.6.1.4.1.335.26
A call is being transmitted or received by the dial backup function of the unit's modem module.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBNoDialTone 1.3.6.1.4.1.335.27
The dial backup function on the unit's modem module went off-hook on either the Tx or Rx dial line and failed to detect a dial tone.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventVoiceBusyOut 1.3.6.1.4.1.335.28
A voice channel has been placed in the busyout state. This can be caused by: one, the link experiencing a loss of sync; two, force disable or force disconnect commands having been executed; or three, an operator placing the channel into the busyout state using a force-busy command.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventVoiceClearBusy 1.3.6.1.4.1.335.29
The condition that caused the voice channel busyout has been cleared or terminated.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBRxConnect 1.3.6.1.4.1.335.30
The dial backup function on the unit's modem module has answered a call over the Rx dial line, and the Rx dial backup connection is made.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBTxConnect 1.3.6.1.4.1.335.31
The dial backup function on the unit's modem module has answered a call over the Tx dial line, and the Tx dial backup connection is made.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBLineBusy 1.3.6.1.4.1.335.32
The dial backup function on the unit's modem module has encountered a busy signal over the Tx of Tx lines.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBRIDetect 1.3.6.1.4.1.335.33
The dial backup function on the unit's modem module has detected an incoming call.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventADBAbort 1.3.6.1.4.1.335.34
A call placed on the dial lines by the dial backup function of the unit's modem module has failed. This message is issued by the call-originating unit.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventLeasedLineOOS 1.3.6.1.4.1.335.35
The unit's modem module is unable to communicate with the remote modem over the lease lines. It is Out Of Service (OOS).
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmEventNewDLCI 1.3.6.1.4.1.335.36
A DLCI (Data Link Connection Identifier) was added.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmEventDLCIActive 1.3.6.1.4.1.335.37
A DLCI (Data Link Connection Identifier) was activated.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmEventConfigurationUpdate 1.3.6.1.4.1.335.38
The node's configuration has been successfully written to the FLASH DRAM (applicable to 3K and 5KT Pro platforms).
TRAP-TYPE    
  trapNodeName  

mcmEventDLCIConnect 1.3.6.1.4.1.335.39
A DLCI connection has been established between a pair of unit ports.
TRAP-TYPE    
  trapDLCIFirstLinkCardNumber  
  trapDLCIFirstLinkChannelNumber  
  trapDLCIFirstLinkDLCINumber  
  trapDLCISecondLinkCardNumber  
  trapDLCISecondLinkChannelNumber  
  trapDLCISecondLinkDLCINumber  

mcmEventDLCIDisconnect 1.3.6.1.4.1.335.40
The DLCI connection between the specified pair of unit ports has been broken.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmSystemReset 1.3.6.1.4.1.335.101
The specified unit has been reset (either warm or cold start).
TRAP-TYPE    
  trapNodeName  

mcmAlarmBatteryLow 1.3.6.1.4.1.335.102
The CMOS RAM backup battery in the specified unit is in need of replacement.
TRAP-TYPE    
  trapNodeName  

mcmAlarmCmosError 1.3.6.1.4.1.335.103
The specified unit encountered a problem writing to the configuration area (CMOS RAM).
TRAP-TYPE    
  trapNodeName  

mcmAlarmSystemFlowControl 1.3.6.1.4.1.335.104
The specified unit is turning off data input from its ports to prevent buffer overflow. This condition generally occurs due to insufficient data throughput across the link.
TRAP-TYPE    
  trapNodeName  

mcmAlarmNodeTableFull 1.3.6.1.4.1.335.105
There are no more available node numbers that can be assigned to new units on this network.
TRAP-TYPE    
  trapNodeName  

mcmAlarmDuplicateNodeNumber 1.3.6.1.4.1.335.106
Two nodes in the network have the same node ID number.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmInvalidLinkCfg 1.3.6.1.4.1.335.107
An attempt has been made to connect a mux link to a port configured other than a mux link, or vice versa.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmBufferOverFlow 1.3.6.1.4.1.335.120
Data has been lost for a specific port on the specified unit due to an buffer overflow condition.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmAlarmLinkDown 1.3.6.1.4.1.335.121
The unit has timed out (40 secs) waiting for synchronization to be acquired on the link. Check the cabling, modem, and remote unit for the source of the problem.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmSyncLoss 1.3.6.1.4.1.335.122
Synchronization has been lost with the remote unit attached to the specified link.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmSyncAcquire 1.3.6.1.4.1.335.123
Synchronization has been achieved with the remote unit attached to the specified link.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmCarrierLoss 1.3.6.1.4.1.335.124
The carrier signal has been lost on the specified link (as detected from the CD interface control signal).
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmCarrierAcquire 1.3.6.1.4.1.335.125
The carrier signal has been detected on the specified link (after the carrier had been previously lost).
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmLineAlarm 1.3.6.1.4.1.335.126
A high error rate is occurring on the specified link.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmSyncChannelStopped 1.3.6.1.4.1.335.127
The specified synchronous port has lost its output clock or the input end of the frame is missing.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  

mcmAlarmLANCardUp 1.3.6.1.4.1.335.128
The LAN card is operating and is available for use (after a previous LAN card down).
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  

mcmAlarmLANCardDown 1.3.6.1.4.1.335.129
The LAN card is not operating or is not available for use.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  

mcmAlarmX21CallFail 1.3.6.1.4.1.335.130
The specified unit was unable to complete a call over the X.21 network from the port indicated.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmPrimaryESIDown 1.3.6.1.4.1.335.131
When secondary interconnect links are configured on a node, this trap is sent if the primary link has timed out waiting for synchronization to be acquired on the primary link.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmStartESISecondary 1.3.6.1.4.1.335.132
The primary link has been down for a preset interval, and now the node is attempting to bring up the secondary link.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmSecondaryUp 1.3.6.1.4.1.335.133
Synchronization has been achieved on the secondary link and data is now being transferred across it.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmSecondaryTerminated 1.3.6.1.4.1.335.134
The primary link has been back up for a preset interval with data being transferred across it. The node is now dropping the give secondary link.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmSecondaryDown 1.3.6.1.4.1.335.135
The secondary interconnect link has timed out waiting for synchronization to be acquired, after the link had been established with data being transferred on it.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmSecondaryReset 1.3.6.1.4.1.335.136
Communications on the secondary interconnect link have been restarted.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmPrimaryESIUp 1.3.6.1.4.1.335.137
Synchronization has been achieved on the primary link and data is now being transferred across it.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmDLCIDeleted 1.3.6.1.4.1.335.138
A DLCI has been deleted.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmDLCIInactive 1.3.6.1.4.1.335.139
A DLCI was inactivated.
TRAP-TYPE    
  trapNodeName  
  trapCardNumber  
  trapChannelNumber  
  trapLinkType  
  trapDLCINumber  

mcmAlarmT1NetworkRedAlarm 1.3.6.1.4.1.335.140
A T1 Network (DS-1) Red Alarm is generated when a Receive-Loss-of-Frame is detected. Voice signaling is static when this condition occurs.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1NetworkRedClear 1.3.6.1.4.1.335.141
A T1 Network (DS-1) Red Alarm condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1LocalRedAlarm 1.3.6.1.4.1.335.142
A T1 Local (DSX-1) Red Alarm is generated when a Receive-Loss-of-Frame is detected. Voice signaling is static when this condition occurs.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1LocalRedClear 1.3.6.1.4.1.335.143
A T1 Local (DSX-1) Red Alarm condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1NetworkYellowAlarm 1.3.6.1.4.1.335.144
A T1 Network (DS-1) Yellow Alarm is generated and transmitted to a remote location when a T1 DS-1 Red Alarm is detected.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1NetworkYellowClear 1.3.6.1.4.1.335.145
A T1 Network (DS-1) Yellow Alarm condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1LocalYellowAlarm 1.3.6.1.4.1.335.146
A T1 Local (DSX-1) Yellow Alarm is generated and transmitted to a remote location when a T1 DSX-1 Red Alarm is detected.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1LocalYellowClear 1.3.6.1.4.1.335.147
A T1 Local (DSX-1) Yellow Alarm condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1NetworkAlarmInd 1.3.6.1.4.1.335.148
A T1 Network (DS-1) Alarm Indication is generated with the detection of the Out-of-Frame condition and when all 1's are detected on the line. The Alarm Indication Signal (AIS) is generated by the T1 module when the Internal Digital Loopback test is invoked.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1NetworkAlarmIndClear 1.3.6.1.4.1.335.149
A T1 Network (DS-1) Alarm Indication condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1LocalAlarmInd 1.3.6.1.4.1.335.150
A T1 Local (DSX-1) Alarm Indication is generated with the detection of the Out-of-Frame condition and when all 1's are detected on the line. The Alarm Indication Signal (AIS) is generated by the T1 module when the Internal Digital Loopback test is invoked.
TRAP-TYPE    
  trapNodeName  

mcmAlarmT1LocalAlarmIndClear 1.3.6.1.4.1.335.151
A T1 Local (DSX-1) Alarm Indication condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmCheckConfiguration 1.3.6.1.4.1.335.152
The configuration data was not written to the FLASH DRAM, following a reset.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2RedAlarm 1.3.6.1.4.1.335.153
An Out-of-Frame condition has persisted for 100 milliseconds on L2. This results from a loss of signal, or loss of frame synchronization.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2RedAlarmClear 1.3.6.1.4.1.335.154
The condition causing the E1 L2 Red Alarm has been cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1RedAlarm 1.3.6.1.4.1.335.155
An Out-of-Frame condition has persisted for 100 milliseconds on L1. This results from a loss of signal, or loss of frame synchronization.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1RedAlarmClear 1.3.6.1.4.1.335.156
The condition causing the E1 L1 Red Alarm has been cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2AlarmIndication 1.3.6.1.4.1.335.157
An Alarm Indication Signal (AIS) occurred on L2. This signal occurs when an Out-of-Frame and a pattern of all ones is detected on L2, and persists for 100 milliseconds. (AIS is generated when a defined condition is required to be transmitted on the E1 line. Ex.: during loopbacks.)
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2AlarmIndicationClear 1.3.6.1.4.1.335.158
The E1 L2 Alarm Indication condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1AlarmIndication 1.3.6.1.4.1.335.159
An Alarm Indication Signal (AIS) occurred on L1. This signal occurs when an Out-of-Frame and a pattern of all ones is detected on L1, and persists for 100 milliseconds. (AIS is generated when a defined condition is required to be transmitted on the E1 line. Ex.: during loopbacks.)
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1AlarmIndicationClear 1.3.6.1.4.1.335.160
The E1 L1 Alarm Indication condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2OOCASFrame 1.3.6.1.4.1.335.161
An Out of CAS Frame condition occurred on the Line 2 (L2) interface. A Multiframe Alignment Signaling Loss indicates that the CAS signaling is no longer in sync, This can be caused by a loss of framing, defective hardware, or improper generation of signaling information on time slot 16. The EAM will set the 'Y' bit in time slot 16 of frame 0.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2OOCASFrameClear 1.3.6.1.4.1.335.162
The E1 L2 Out of CAS Frame condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1OOCASFrame 1.3.6.1.4.1.335.163
An Out of CAS Frame condition occurred on the Line 1 (L1) interface. A Multiframe Alignment Signaling Loss indicates that the CAS signaling is no longer in sync, This can be caused by a loss of framing, defective hardware, or improper generation of signaling information on time slot 16. The EAM will set the 'Y' bit in time slot 16 of frame 0.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1OOCASFrameClear 1.3.6.1.4.1.335.164
The E1 L1 Out of CAS Frame condition has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2TS16AISAlarm 1.3.6.1.4.1.335.165
A Time Slot 16 (TS16) Alarm Indication Signal occurred on the Line 2 (L2) interface. A byte containing all ones was received in Time Slot 16 for two consecutive frames during an Out of Signaling Multiframe Alignment.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2TS16AISAlarmClear 1.3.6.1.4.1.335.166
The E1 Time Slot 16 Alarm Indication Signal condition on L2 has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1TS16AISAlarm 1.3.6.1.4.1.335.167
A Time Slot 16 (TS16) Alarm Indication Signal occurred on the Line 1 (L1) interface. A byte containing all ones was received in Time Slot 16 for two consecutive frames during an Out of Signaling Multiframe Alignment.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1TS16AISAlarmClear 1.3.6.1.4.1.335.168
The E1 Time Slot 16 Alarm Indication Signal condition on L1 has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2RemoteYAlarm 1.3.6.1.4.1.335.169
A Remote 'Y' Signaling Alarm condition has occurred on the Line 2 (L2) interface. This is the result of the EAM setting the 'Y' bit in time slot 16 of frame 0. The condition indicates the loss of signaling at the remote site.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2RemoteYAlarmClear 1.3.6.1.4.1.335.170
The E1 Remote 'Y' Signaling Alarm condition on the L2 interface has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1RemoteYAlarm 1.3.6.1.4.1.335.171
A Remote 'Y' Signaling Alarm condition has occurred on the Line 1 (L1) interface. This is the result of the EAM setting the 'Y' bit in time slot 16 of frame 0. The condition indicates the loss of signaling at the remote site.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1RemoteYAlarmClear 1.3.6.1.4.1.335.172
The E1 Remote 'Y' Signaling Alarm condition on the L1 interface has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2RemoteAAlarm 1.3.6.1.4.1.335.173
A Remote 'A' Signaling Alarm condition has occurred on the Line 2 (L2) interface. This Frame Alignment Signaling condition occurs when the 'A' bit, received in Bit 3 of Time Slot 0 of the Non Frame Alignment Signal (NFAS), is detected. The alarm indicates that the receiver at the remote is not detecting valid information; which could be the result of a loss of signal, loss of frame synchronization, or high-bit errors.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L2RemoteAAlarmClear 1.3.6.1.4.1.335.174
The E1 Remote 'A' Signaling Alarm condition on the L2 interface has cleared.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1RemoteAAlarm 1.3.6.1.4.1.335.175
A Remote 'A' Signaling Alarm condition has occurred on the Line 1 (L1) interface. This Frame Alignment Signaling condition occurs when the 'A' bit, received in Bit 3 of Time Slot 0 of the Non Frame Alignment Signal (NFAS), is detected. The alarm indicates that the receiver at the remote is not detecting valid information; which could be the result of a loss of signal, loss of frame synchronization, or high-bit errors.
TRAP-TYPE    
  trapNodeName  

mcmAlarmE1L1RemoteAAlarmClear 1.3.6.1.4.1.335.176
The E1 Remote 'A' Signaling Alarm condition on the L1 interface has cleared.
TRAP-TYPE    
  trapNodeName  

mcmProxyAlarmNodeUnreachable 1.3.6.1.4.1.335.500
The proxy agent's event polling application could not reach the intended node.
TRAP-TYPE    
  trapNodeName  

mcmProxyEventPollingBegin 1.3.6.1.4.1.335.600
The proxy agent has begun polling for events at the specified time.
TRAP-TYPE    

mcmProxyEventPollingEnd 1.3.6.1.4.1.335.601
The proxy agent has completed the event poll cycle.
TRAP-TYPE    

Defined Objects

VoiceChannelDiagEntry  
SEQUENCE    
  INTEGER as voiceChannelDiagCardNumber  
  INTEGER as voiceChannelDiagChannelNumber  
  INTEGER as voiceChannelDiagCommand  

SyncChannelDiagEntry  
SEQUENCE    
  INTEGER as syncChannelDiagCardNumber  
  INTEGER as syncChannelDiagChannelNumber  
  INTEGER as syncChannelDiagCommand  

SysLocNodeLinkEntry  
SEQUENCE    
  INTEGER as sysLocNodeLinkIndex  
  DisplayString as sysLocNodeLinkNodeNameOfFeeder  
  INTEGER as sysLocNodeLinkNodeType  
  INTEGER as sysLocNodeLinkNodeNumber  

SysClassCfgEntry  
SEQUENCE    
  INTEGER as sysClassCfgClassNumber  
  DisplayString as sysClassCfgClassName  
  INTEGER as sysClassCfgClassSecondary  
  DisplayString as sysClassCfgClassMessage  
  DisplayString as sysClassCfgClassPassword  
  INTEGER as sysClassCfgNoActivityTimeOut  
  INTEGER as sysClassCfgEntryStatus  

CardEntry  
SEQUENCE    
  INTEGER as cardSlotNumber  
  INTEGER as cardModuleID  
  INTEGER as cardPcbRevision  

EliCardFunctionEntry  
SEQUENCE    
  INTEGER as eliCardFunctionSlotNumber  
  DisplayString as eliCardFunctionPromID  
  INTEGER as eliCardFunctionTypeRTSFunction  
  INTEGER as eliCardFunctionTypeBridgeFunction  
  INTEGER as eliCardFunctionTypeRouterFunction  
  INTEGER as eliCardFunctionFlashMemory  

T1e1CardSoftwareInfoEntry  
SEQUENCE    
  INTEGER as t1e1CardSoftwareInfoCardNumber  
  INTEGER as t1e1CardSoftwareInfoCardType  
  INTEGER as t1e1CardSoftwareInfoReleaseLevel  
  DisplayString as t1e1CardSoftwareInfoSoftwareID  
  DisplayString as t1e1CardSoftwareInfoBootCode  

PortCfgEntry  
SEQUENCE    
  INTEGER as portCfgCardNumber  
  INTEGER as portCfgChannelNumber  
  INTEGER as portCfgChannelType  

SyncPortCfgEntry  
SEQUENCE    
  INTEGER as syncPortCfgCardNumber  
  INTEGER as syncPortCfgChannelNumber  
  INTEGER as syncPortCfgProtocol  

FCmdPortPhyParaEntry  
SEQUENCE    
  INTEGER as fCmdPortPhyParaCardNumber  
  INTEGER as fCmdPortPhyParaChannelNumber  
  INTEGER as fCmdPortPhyParaStopBits  
  INTEGER as fCmdPortPhyParaCodeLevel  
  INTEGER as fCmdPortPhyParaDataRate  
  INTEGER as fCmdPortPhyParaEcho  
  INTEGER as fCmdPortPhyParaCRDelay  
  INTEGER as fCmdPortPhyParaLFDelay  
  INTEGER as fCmdPortPhyParaFFDelay  
  INTEGER as fCmdPortPhyParaParity  

LogPortPhyParaEntry  
SEQUENCE    
  INTEGER as logPortPhyParaCardNumber  
  INTEGER as logPortPhyParaChannelNumber  
  INTEGER as logPortPhyParaStopBits  
  INTEGER as logPortPhyParaCodeLevel  
  INTEGER as logPortPhyParaDataRate  
  INTEGER as logPortPhyParaCRDelay  
  INTEGER as logPortPhyParaLFDelay  
  INTEGER as logPortPhyParaFFDelay  
  INTEGER as logPortPhyParaXONChar  
  INTEGER as logPortPhyParaXOFFChar  
  INTEGER as logPortPhyParaFlowControl  
  INTEGER as logPortPhyParaBufferControl  
  INTEGER as logPortPhyParaParity  

SyncPortPreConfigEntry  
SEQUENCE    
  INTEGER as syncPortPreConfigCardNumber  
  INTEGER as syncPortPreConfigChannelNumber  
  INTEGER as syncPortPreConfigProtocol  

SyncChPhyParaEntry  
SEQUENCE    
  INTEGER as syncChPhyParaCardNumber  
  INTEGER as syncChPhyParaChannelNumber  
  INTEGER as syncChPhyParaDataRate  
  INTEGER as syncChPhyParaCarrierMode  
  INTEGER as syncChPhyParaInterfaceType  
  INTEGER as syncChPhyParaIdleFill  
  OCTET STRING as syncChPhyParaHighSyncChar  
  OCTET STRING as syncChPhyParaLowSyncChar  
  INTEGER as syncChPhyParaNumLeadSyncCount  
  INTEGER as syncChPhyParaMaxTxBlockSize  
  OCTET STRING as syncChPhyParaPadChar  
  INTEGER as syncChPhyParaNumLeadingPads  
  INTEGER as syncChPhyParaNumTrailingPads  
  INTEGER as syncChPhyParaClockFlowControl  
  INTEGER as syncChPhyParaEncoding  
  INTEGER as syncChPhyParaChTxClocking  
  INTEGER as syncChPhyParaChRxClocking  
  INTEGER as syncChPhyParaPriority  
  INTEGER as syncChPhyParaDSRControl  
  INTEGER as syncChPhyParaBufferControl  
  INTEGER as syncChPhyParaMaxRxBlockSize  
  INTEGER as syncChPhyParaProtocol  
  INTEGER as syncChPhyParaClaimedBandwidth  
  INTEGER as syncChPhyParaDLCTransitRate  

AsyncChPhyParaEntry  
SEQUENCE    
  INTEGER as asyncChPhyParaCardNumber  
  INTEGER as asyncChPhyParaChannelNumber  
  INTEGER as asyncChPhyParaStopBits  
  INTEGER as asyncChPhyParaCodeLevel  
  INTEGER as asyncChPhyParaDataRate  
  INTEGER as asyncChPhyParaEcho  
  INTEGER as asyncChPhyParaHPXMode  
  INTEGER as asyncChPhyParaConnectTo  
  INTEGER as asyncChPhyParaRemCTSControl  
  INTEGER as asyncChPhyParaCRDelay  
  INTEGER as asyncChPhyParaLFDelay  
  INTEGER as asyncChPhyParaFFDelay  
  INTEGER as asyncChPhyParaXONChar  
  INTEGER as asyncChPhyParaXOFFChar  
  INTEGER as asyncChPhyParaCmdFacilityAccess  
  INTEGER as asyncChPhyParaCmdModeEntry  
  INTEGER as asyncChPhyParaLocChannelConfig  
  INTEGER as asyncChPhyParaCmdModeAccess  
  INTEGER as asyncChPhyParaTandemSupport  
  INTEGER as asyncChPhyParaSmoothScroll  
  INTEGER as asyncChPhyParaFlowControl  
  INTEGER as asyncChPhyParaBufferControl  
  INTEGER as asyncChPhyParaFlowControlStrip  
  INTEGER as asyncChPhyParaSyncLossDisconnect  
  INTEGER as asyncChPhyParaEIAControls  
  INTEGER as asyncChPhyParaPriority  
  INTEGER as asyncChPhyParaParity  
  INTEGER as asyncChPhyParaCompression  

AsyncChSwParaEntry  
SEQUENCE    
  INTEGER as asyncChSwParaCardNumber  
  INTEGER as asyncChSwParaChannelNumber  
  DisplayString as asyncChSwParaDestinationClass  
  INTEGER as asyncChSwParaConnectProtocol  
  INTEGER as asyncChSwParaRcvInhibit  
  INTEGER as asyncChSwParaResourceClassNumber  
  INTEGER as asyncChSwParaCallInhibit  
  INTEGER as asyncChSwParaUnbalanceRates  
  INTEGER as asyncChSwParaCharacterSet  
  INTEGER as asyncChSwParaMatrixSwitching  
  DisplayString as asyncChSwParaChannelPassword  

VoiceFaxChPhyParaEntry  
SEQUENCE    
  INTEGER as voiceFaxChPhyParaCardNumber  
  INTEGER as voiceFaxChPhyParaChannelNumber  
  INTEGER as voiceFaxChPhyParaWireOperation  
  INTEGER as voiceFaxChPhyParaViewSignallingType  
  INTEGER as voiceFaxChPhyParaBergStrapType  
  INTEGER as voiceFaxChPhyParaSuppression  
  INTEGER as voiceFaxChPhyParaCfgSignallingType  
  INTEGER as voiceFaxChPhyParaOPXNumberOfRings  
  INTEGER as voiceFaxChPhyParaFXOSupervisorDisc  
  INTEGER as voiceFaxChPhyParaRingFrequency  
  INTEGER as voiceFaxChPhyParaJitter  
  INTEGER as voiceFaxChPhyParaDTMFRegeneration  
  INTEGER as voiceFaxChPhyParaAutoLevelEnhancement  
  INTEGER as voiceFaxChPhyParaBackground  
  INTEGER as voiceFaxChPhyParaDigitizingRate  
  INTEGER as voiceFaxChPhyParaBusyMode  
  INTEGER as voiceFaxChPhyParaVoiceFaxMode  
  INTEGER as voiceFaxChPhyParaBandwidthAssignment  
  INTEGER as voiceFaxChPhyParaInputGain  
  INTEGER as voiceFaxChPhyParaChannelType  
  INTEGER as voiceFaxChPhyParaEMTypeStrapping  
  INTEGER as voiceFaxChPhyParaOutputAttenuation  
  INTEGER as voiceFaxChPhyParaPriority  
  INTEGER as voiceFaxChPhyParaFaxDigitizingRate  
  INTEGER as voiceFaxChPhyParaLineImpedance  
  INTEGER as voiceFaxChPhyParaMaxOutputLevel  
  INTEGER as voiceFaxChPhyParaRegenerationDelay  
  INTEGER as voiceFaxChPhyParaMaxDialDigitTimeLimit  
  INTEGER as voiceFaxChPhyParaMaxNumFwdDigits  
  INTEGER as voiceFaxChPhyParaCallProgressionTones  
  INTEGER as voiceFaxChPhyParaRegenFormat  
  INTEGER as voiceFaxChPhyParaChannelVersion  

VoiceFaxChSwParaEntry  
SEQUENCE    
  INTEGER as voiceFaxChSwParaCardNumber  
  INTEGER as voiceFaxChSwParaChannelNumber  
  DisplayString as voiceFaxChSwParaVoiceExtension  
  DisplayString as voiceFaxChSwParaFaxExtension  
  DisplayString as voiceFaxChSwParaAutoCallNumber  
  INTEGER as voiceFaxChSwParaReceiveInhibit  
  INTEGER as voiceFaxChSwParaCallInhibit  

DigitalVoiceChPhyParaEntry  
SEQUENCE    
  INTEGER as digitalVoiceChPhyParaCardNumber  
  INTEGER as digitalVoiceChPhyParaChannelNumber  
  INTEGER as digitalVoiceChPhyParaViewSignallingType  
  INTEGER as digitalVoiceChPhyParaBergStrapType  
  INTEGER as digitalVoiceChPhyParaPortEmulation  
  INTEGER as digitalVoiceChPhyParaSuppression  
  INTEGER as digitalVoiceChPhyParaJitter  
  INTEGER as digitalVoiceChPhyParaDTMFRegeneration  
  INTEGER as digitalVoiceChPhyParaAutoGainControl  
  INTEGER as digitalVoiceChPhyParaBackground  
  INTEGER as digitalVoiceChPhyParaDigitizingRate  
  INTEGER as digitalVoiceChPhyParaBusyMode  
  INTEGER as digitalVoiceChPhyParaVoiceFaxMode  
  INTEGER as digitalVoiceChPhyParaBandwidthAssignment  
  INTEGER as digitalVoiceChPhyParaInputGain  
  INTEGER as digitalVoiceChPhyParaChannelType  
  INTEGER as digitalVoiceChPhyParaOutputAttenuation  
  INTEGER as digitalVoiceChPhyParaPriority  
  INTEGER as digitalVoiceChPhyParaFaxDigitizingRate  
  INTEGER as digitalVoiceChPhyParaRegenerationDelay  
  INTEGER as digitalVoiceChPhyParaMaxDialDigitTimeLimit  
  INTEGER as digitalVoiceChPhyParaMaxNumFwdDigits  
  INTEGER as digitalVoiceChPhyParaCallProgressionTones  
  INTEGER as digitalVoiceChPhyParaRegenerationFormat  
  INTEGER as digitalVoiceChPhyParaCompander  
  INTEGER as digitalVoiceChPhyParaPremiumVoice  
  INTEGER as digitalVoiceChPhyParaModuleIdentification  
  INTEGER as digitalVoiceChPhyParaChannelVersion  

DigitalVoiceChSwParaEntry  
SEQUENCE    
  INTEGER as digitalVoiceChSwParaCardNumber  
  INTEGER as digitalVoiceChSwParaChannelNumber  
  DisplayString as digitalVoiceChSwParaVoiceExtension  
  DisplayString as digitalVoiceChSwParaAutoCallNumber  
  INTEGER as digitalVoiceChSwParaReceiveInhibit  
  INTEGER as digitalVoiceChSwParaCallInhibit  

MuxLinkCfgEntry  
SEQUENCE    
  INTEGER as muxLinkCfgCardNumber  
  INTEGER as muxLinkCfgChannelNumber  
  INTEGER as muxLinkCfgDataRate  

MuxOrLEsiPreConfigEntry  
SEQUENCE    
  INTEGER as muxOrLEsiPreConfigCardNumber  
  INTEGER as muxOrLEsiPreConfigChannelNumber  
  INTEGER as muxOrLEsiPreConfigDataRate  

EsiLinkCfgEntry  
SEQUENCE    
  INTEGER as esiLinkCfgCardNumber  
  INTEGER as esiLinkCfgChannelNumber  
  INTEGER as esiLinkCfgDataRate  

EsiOrSecLinkPreConfigEntry  
SEQUENCE    
  INTEGER as esiOrSecLinkPreConfigCardNumber  
  INTEGER as esiOrSecLinkPreConfigChannelNumber  
  INTEGER as esiOrSecLinkPreConfigDataRate  

EsiOrSecLinkAssignCfgEntry  
SEQUENCE    
  INTEGER as esiOrSecLinkAssignCfgCardNumber  
  INTEGER as esiOrSecLinkAssignCfgChannelNumber  
  INTEGER as esiOrSecLinkAssignCfgLinkForcedOn  
  INTEGER as esiOrSecLinkAssignCfgSecLinkBackUpOnly  
  INTEGER as esiOrSecLinkAssignCfgUtilThresholdToActivateSec  
  INTEGER as esiOrSecLinkAssignCfgUtilThresholdToDeactivateSec  
  INTEGER as esiOrSecLinkAssignCfgTimeThresholdExceedToActivateSec  
  INTEGER as esiOrSecLinkAssignCfgTimeThresholdBelowToDeactivateSec  
  INTEGER as esiOrSecLinkAssignCfgTerminateCallonDeactivation  

EsiOrSecLinkTODActivationEntry  
SEQUENCE    
  INTEGER as esiOrSecLinkTODActivationCardNumber  
  INTEGER as esiOrSecLinkTODActivationChannelNumber  
  INTEGER as esiOrSecLinkTODActivationSetSchedule  
  INTEGER as esiOrSecLinkTODActivationTenMinInterval  
  INTEGER as esiOrSecLinkTODActivationLinkState  

X21LinkCfgEntry  
SEQUENCE    
  INTEGER as x21LinkCfgCardNumber  
  INTEGER as x21LinkCfgChannelNumber  
  INTEGER as x21LinkCfgLocalConnectMode  
  INTEGER as x21LinkCfgRemoteConnectMode  
  INTEGER as x21LinkCfgLocalConnectTimeout  
  INTEGER as x21LinkCfgRemoteConnectTimeout  
  INTEGER as x21LinkCfgLocalConnectRetries  
  INTEGER as x21LinkCfgRemoteConnectRetries  

X21LinkPreConfigEntry  
SEQUENCE    
  INTEGER as x21LinkPreConfigCardNumber  
  INTEGER as x21LinkPreConfigChannelNumber  
  INTEGER as x21LinkPreConfigLocalConnectMode  
  INTEGER as x21LinkPreConfigRemoteConnectMode  
  INTEGER as x21LinkPreConfigLocalConnectTimeout  
  INTEGER as x21LinkPreConfigRemoteConnectTimeout  
  INTEGER as x21LinkPreConfigLocalConnectRetries  
  INTEGER as x21LinkPreConfigRemoteConnectRetries  

LocalESILinkCfgEntry  
SEQUENCE    
  INTEGER as localESILinkCfgCardNumber  
  INTEGER as localESILinkCfgChannelNumber  
  INTEGER as localESILinkCfgDataRate  

EsiSecLinkCfgEntry  
SEQUENCE    
  INTEGER as esiSecLinkCfgCardNumber  
  INTEGER as esiSecLinkCfgChannelNumber  
  INTEGER as esiSecLinkCfgDataRate  

EsiSecLinkAssignmentEntry  
SEQUENCE    
  INTEGER as esiSecLinkAssignmentSecCardNumber  
  INTEGER as esiSecLinkAssignmentSecChannelNumber  
  INTEGER as esiSecLinkAssignmentEntryAction  
  INTEGER as esiSecLinkAssignmentPriCardNumber  
  INTEGER as esiSecLinkAssignmentPriChannelNumber  

FrameRelayLinkEntry  
SEQUENCE    
  INTEGER as frameRelayLinkCfgCardNumber  
  INTEGER as frameRelayLinkCfgChannelNumber  
  INTEGER as frameRelayLinkCfgDataRate  
  INTEGER as frameRelayLinkCfgLocalMgmtProtocol  
  INTEGER as frameRelayLinkCfgFullStatusPollingCounter  
  INTEGER as frameRelayLinkCfgErrorThreshold  
  INTEGER as frameRelayLinkCfgEventCount  
  INTEGER as frameRelayLinkCfgLinkIntegrityVerificationTimer  
  INTEGER as frameRelayLinkCfgPollingVerificationTimer  
  INTEGER as frameRelayLinkCfgMaxFrameSize  
  INTEGER as frameRelayLinkCfgRxClockingSource  
  INTEGER as frameRelayLinkCfgTxClockingSource  
  OCTET STRING as frameRelayLinkCfgNetworkAddress  
  INTEGER as frameRelayLinkCfgAccessLinkMode  

FrameRelayLinkCfgDLCIEntry  
SEQUENCE    
  INTEGER as frameRelayLinkCfgDLCICardNumber  
  INTEGER as frameRelayLinkCfgDLCIChannelNumber  
  INTEGER as frameRelayLinkCfgDLCINumber  
  INTEGER as frameRelayLinkCfgDLCIType  
  INTEGER as frameRelayLinkCfgDLCICommittedInfoRateForward  
  INTEGER as frameRelayLinkCfgDLCICommittedInfoRateBackward  
  INTEGER as frameRelayLinkCfgDLCICommittedBurstSizeForward  
  INTEGER as frameRelayLinkCfgDLCICommittedBurstSizeBackward  
  INTEGER as frameRelayLinkCfgDLCIExcessBurstSizeForward  
  INTEGER as frameRelayLinkCfgDLCIExcessBurstSizeBackward  

FrameRelayLinkControlEntry  
SEQUENCE    
  INTEGER as frameRelayLinkControlLinkCardNumber  
  INTEGER as frameRelayLinkControlLinkChannelNumber  
  INTEGER as frameRelayLinkControlDLCINumber  
  INTEGER as frameRelayLinkControlCommand  
  INTEGER as frameRelayLinkControlDLCIType  

FrameRelayDLCIControlEntry  
SEQUENCE    
  INTEGER as frameRelayDLCIControlLinkCardNumber  
  INTEGER as frameRelayDLCIControlLinkChannelNumber  
  INTEGER as frameRelayDLCIControlDLCINumber  
  INTEGER as frameRelayDLCIControlCommand  
  DisplayString as frameRelayDLCIControlFconnNodeName  
  INTEGER as frameRelayDLCIControlFconnCardNumber  
  INTEGER as frameRelayDLCIControlFconnChannelNumber  
  INTEGER as frameRelayDLCIControlFconnDLCINumber  

FrameRelayDLCIConnectsEntry  
SEQUENCE    
  INTEGER as frameRelayDLCIConnectsLinkCardNumber  
  INTEGER as frameRelayDLCIConnectsLinkChannelNumber  
  INTEGER as frameRelayDLCIConnectsDLCIConnected  
  INTEGER as frameRelayDLCIConnectsDestCardNumber  
  INTEGER as frameRelayDLCIConnectsDestChannelNumber  
  INTEGER as frameRelayDLCIConnectsDestDLCINumber  

T1DS1InterfaceEntry  
SEQUENCE    
  INTEGER as t1DS1InterfaceDS0Index  
  INTEGER as t1DS1InterfaceConnectionState  

T1DSX1InterfaceEntry  
SEQUENCE    
  INTEGER as t1DSX1InterfaceDS0Index  
  INTEGER as t1DSX1InterfaceConnectionState  

T1FlashControlEntry  
SEQUENCE    
  INTEGER as t1FlashControlCardNumber  
  INTEGER as t1FlashControlCommand  
  INTEGER as t1FlashControlFlashStatus  

E1L1InterfaceEntry  
SEQUENCE    
  INTEGER as e1L1InterfaceDS0Index  
  INTEGER as e1L1InterfaceConnectionState  

E1L2InterfaceEntry  
SEQUENCE    
  INTEGER as e1L2InterfaceDS0Index  
  INTEGER as e1L2InterfaceConnectionState  

E1FlashControlEntry  
SEQUENCE    
  INTEGER as e1FlashControlCardNumber  
  INTEGER as e1FlashControlCommand  
  INTEGER as e1FlashControlFlashStatus  

TrapSubsEntry  
SEQUENCE    
  IpAddress as trapSubsIPAddress  
  DisplayString as trapSubsCommunityString  
  INTEGER as trapSubsAction  

PxyAddressMapEntry  
SEQUENCE    
  INTEGER as pxyAddressMapNodeNumber  
  INTEGER as pxyAddressMapEntryStatus  
  DisplayString as pxyAddressMapNodeNameAndCommunity  
  INTEGER as pxyAddressMapChangeNodeNumberTo  

PxySupportedVersionEntry  
SEQUENCE    
  INTEGER as pxySupportedIndex  
  INTEGER as pxySupportedVersionNumber  

AsyncResetEntry  
SEQUENCE    
  INTEGER as asyncResetCardNumber  
  INTEGER as asyncResetChannelNumber  
  INTEGER as asyncResetCommand  

SyncResetEntry  
SEQUENCE    
  INTEGER as syncResetCardNumber  
  INTEGER as syncResetChannelNumber  
  INTEGER as syncResetCommand  

VoiceResetEntry  
SEQUENCE    
  INTEGER as voiceResetCardNumber  
  INTEGER as voiceResetChannelNumber  
  INTEGER as voiceResetCommand  

LinkResetEntry  
SEQUENCE    
  INTEGER as linkResetCardNumber  
  INTEGER as linkResetChannelNumber  
  INTEGER as linkResetCommand  

VoiceFlashEPROMEntry  
SEQUENCE    
  INTEGER as voiceFlashEPROMCardNumber  
  INTEGER as voiceFlashEPROMChannelNumber  
  INTEGER as voiceFlashEPROMCommand  

LanCardResetEntry  
SEQUENCE    
  INTEGER as lanCardResetCardNumber  
  INTEGER as lanCardResetType  

ChControlEntry  
SEQUENCE    
  INTEGER as chControlCardNumber  
  INTEGER as chControlChannelNumber  
  INTEGER as chControlCommand  
  DisplayString as chControlForceConnToNodeName  
  INTEGER as chControlForceConnToCard  
  INTEGER as chControlForceConnToChannel  

FrameRelayDLCIResetEntry  
SEQUENCE    
  INTEGER as frameRelayDLCIResetCardNumber  
  INTEGER as frameRelayDLCIResetChannelNumber  
  INTEGER as frameRelayDLCIResetDLCINumber  

FrameRelayAllDLCIResetEntry  
SEQUENCE    
  INTEGER as frameRelayAllDLCIResetCardNumber  
  INTEGER as frameRelayAllDLCIResetChannelNumber  
  INTEGER as frameRelayAllDLCIResetCommand  

T1e1CardResetEntry  
SEQUENCE    
  INTEGER as t1e1CardResetCardNumber  
  INTEGER as t1e1CardResetCommand  

PortTypeStatusEntry  
SEQUENCE    
  INTEGER as portTypeStatusCardNumber  
  INTEGER as portTypeStatusChannelNumber  
  INTEGER as portTypeStatusChannelType  

AsyncChStatusEntry  
SEQUENCE    
  INTEGER as asyncChStatusCardNumber  
  INTEGER as asyncChStatusChannelNumber  
  INTEGER as asyncChStatusEiaInputsRTSStatus  
  INTEGER as asyncChStatusEiaInputsDTRStatus  
  INTEGER as asyncChStatusEiaInputsUAStatus  
  INTEGER as asyncChStatusEiaInputsBUSYStatus  
  INTEGER as asyncChStatusEiaOutputsRIStatus  
  INTEGER as asyncChStatusEiaOutputsRLSDStatus  
  INTEGER as asyncChStatusEiaOutputsCTSStatus  
  INTEGER as asyncChStatusEiaOutputsDSRStatus  

SyncChStatusEntry  
SEQUENCE    
  INTEGER as syncChStatusCardNumber  
  INTEGER as syncChStatusChannelNumber  
  INTEGER as syncChStatusEiaInputsRTSStatus  
  INTEGER as syncChStatusEiaInputsDTRStatus  
  INTEGER as syncChStatusEiaInputsUAStatus  
  INTEGER as syncChStatusEiaInputsBUSYStatus  
  INTEGER as syncChStatusEiaOutputsRIStatus  
  INTEGER as syncChStatusEiaOutputsRLSDStatus  
  INTEGER as syncChStatusEiaOutputsCTSStatus  
  INTEGER as syncChStatusEiaOutputsDSRStatus  

VoiceChStatusEntry  
SEQUENCE    
  INTEGER as voiceChStatusCardNumber  
  INTEGER as voiceChStatusChannelNumber  
  INTEGER as voiceChStatusInputLevel  
  INTEGER as voiceChStatusStatus  
  DisplayString as voiceChStatusPromID  
  DisplayString as voiceChStatusSoftwareRevision  
  INTEGER as voiceChStatusTestMode  
  INTEGER as voiceChStatusTestDSPResult  
  INTEGER as voiceChStatusTestDataRAMResult  
  INTEGER as voiceChStatusTestCodeRAMResult  
  INTEGER as voiceChStatusTestAnalogHwResult  
  INTEGER as voiceChStatusTestDeviceCfgResult  
  INTEGER as voiceChStatusFlashState  
  INTEGER as voiceChStatusEPROMStatus  

LinkStatusEntry  
SEQUENCE    
  INTEGER as linkStatusCardNumber  
  INTEGER as linkStatusChannelNumber  
  INTEGER as linkStatusLinkType  
  INTEGER as linkStatusIntegralDevType  
  INTEGER as linkStatusIntegralDevSlotNumber  
  INTEGER as linkStatusIntegralDeviceNumber  
  INTEGER as linkStatusStatus  
  INTEGER as linkStatusNodeNumber  
  INTEGER as linkStatusRemoteChannelNumber  
  INTEGER as linkStatusRemoteCardNumber  
  INTEGER as linkStatusEiaOutputsRTSStatus  
  INTEGER as linkStatusEiaOutputsDTRStatus  
  INTEGER as linkStatusEiaOutputsBUSYStatus  
  INTEGER as linkStatusEiaOutputsUAStatus  
  INTEGER as linkStatusEiaInputsRLSDStatus  
  INTEGER as linkStatusEiaInputsDSRStatus  
  INTEGER as linkStatusEiaInputsRIStatus  
  INTEGER as linkStatusEiaInputsCTSStatus  

FrameRelayLinkDLCIStatusEntry  
SEQUENCE    
  INTEGER as frameRelayLinkDLCIStatusCardNumber  
  INTEGER as frameRelayLinkDLCIStatusChannelNumber  
  INTEGER as frameRelayLinkDLCIStatusDLCINumber  
  INTEGER as frameRelayLinkDLCIStatusNumberOfDLCIs  
  INTEGER as frameRelayLinkDLCIStatusConfOnMarathon  
  INTEGER as frameRelayLinkDLCIStatusReportedByPBX  
  INTEGER as frameRelayLinkDLCIStatusActive  
  INTEGER as frameRelayLinkDLCIStatusLinkStatus  
  INTEGER as frameRelayLinkDLCIStatusUpConnectedNodeNumber  
  INTEGER as frameRelayLinkDLCIStatusUpConnectedChannelNumber  
  INTEGER as frameRelayLinkDLCIStatusUpConnectedCardNumber  
  INTEGER as frameRelayLinkDLCIStatusUpRemoteDLCINumber  

ChConnectionStatusEntry  
SEQUENCE    
  INTEGER as chConnectionStatusCardNumber  
  INTEGER as chConnectionStatusChannelNumber  
  INTEGER as chConnectionStatusChannelStatus  
  INTEGER as chConnectionStatusConnectedToNode  
  INTEGER as chConnectionStatusConnectedToChannel  
  INTEGER as chConnectionStatusConnectedToCard  
  INTEGER as chConnectionStatusConnectedToInternalFacility  

RemoteNodeStatusEntry  
SEQUENCE    
  INTEGER as remoteNodeStatusIndex  
  DisplayString as remoteNodeStatusName  
  INTEGER as remoteNodeStatusType  
  INTEGER as remoteNodeStatusNumber  

ClassStatusEntry  
SEQUENCE    
  INTEGER as classStatusCfgClassIndex  
  INTEGER as classStatusCfgClassNumber  

ClassQueueStatusEntry  
SEQUENCE    
  INTEGER as classQueueStatusClassNum  
  INTEGER as classQueueStatusChCount  

ClassChannelStatusEntry  
SEQUENCE    
  INTEGER as classChannelStatusClassNum  
  INTEGER as classQueueStatusChannelIndex  
  INTEGER as classChannelStatusNode  
  INTEGER as classChannelStatusChannel  
  INTEGER as classChannelStatusCard  

FlashMemoryStatusEntry  
SEQUENCE    
  INTEGER as flashMemoryStatusFlashNumber  
  INTEGER as flashMemoryStatusFileHeaderSize  
  INTEGER as flashMemoryStatusFileType  
  INTEGER as flashMemoryStatusMarathonImageSize  
  INTEGER as flashMemoryStatusCreationHours  
  INTEGER as flashMemoryStatusCreationMinutes  
  INTEGER as flashMemoryStatusCreationSeconds  
  INTEGER as flashMemoryStatusCreationYear  
  INTEGER as flashMemoryStatusCreationMonth  
  INTEGER as flashMemoryStatusCreationDay  
  INTEGER as flashMemoryStatusImageChecksum  
  DisplayString as flashMemoryStatusPromID  

ChForceConnStatusEntry  
SEQUENCE    
  INTEGER as chForceConnStatusCardNumber  
  INTEGER as chForceConnStatusChannelNumber  
  INTEGER as chForceConnStatusNodeNumber  
  INTEGER as chForceConnStatusToNodeNumber  
  INTEGER as chForceConnStatusToCardNumber  
  INTEGER as chForceConnStatusToChannelNumber  

ChPeriodicStatisticsEntry  
SEQUENCE    
  INTEGER as chPeriodicStatisticsCardNumber  
  INTEGER as chPeriodicStatisticsChannelNumber  
  INTEGER as chPeriodicStatisticsMonth  
  INTEGER as chPeriodicStatisticsDay  
  INTEGER as chPeriodicStatisticsHours  
  INTEGER as chPeriodicStatisticsMinutes  
  INTEGER as chPeriodicStatisticsSeconds  
  Gauge as chPeriodicStatisticsBuffUtilization  
  INTEGER as chPeriodicStatisticsChannelBusiedOut  
  INTEGER as chPeriodicStatisticsChannelInFlowControl  

ChVPeriodicStatisticsEntry  
SEQUENCE    
  INTEGER as chVPeriodicStatisticsCardNumber  
  INTEGER as chVPeriodicStatisticsChannelNumber  
  INTEGER as chVPeriodicStatisticsMonth  
  INTEGER as chVPeriodicStatisticsDay  
  INTEGER as chVPeriodicStatisticsHours  
  INTEGER as chVPeriodicStatisticsMinutes  
  INTEGER as chVPeriodicStatisticsSeconds  
  INTEGER as chVPeriodicStatisticsConnectTime  
  Counter as chVPeriodicStatisticsTotalCalls  
  INTEGER as chVPeriodicStatisticsAvgCallDuration  
  INTEGER as chVPeriodicStatisticsBusyOutTime  
  Counter as chVPeriodicStatisticsNumOfCallAttempts  
  Counter as chVPeriodicStatisticsDiscardedFrameCounts  
  INTEGER as chVPeriodicStatisticsTimeInFaxMode  
  Gauge as chVPeriodicStatisticsPercentInFaxMode  

LinkPeriodicStatisticsEntry  
SEQUENCE    
  INTEGER as linkPeriodicStatisticsCardNumber  
  INTEGER as linkPeriodicStatisticsChannelNumber  
  INTEGER as linkPeriodicStatisticsMonth  
  INTEGER as linkPeriodicStatisticsDay  
  INTEGER as linkPeriodicStatisticsHours  
  INTEGER as linkPeriodicStatisticsMinutes  
  INTEGER as linkPeriodicStatisticsSeconds  
  INTEGER as linkPeriodicStatisticsLinkType  
  Counter as linkPeriodicStatisticsTxFrames  
  Counter as linkPeriodicStatisticsRxFrames  
  Gauge as linkPeriodicStatisticsLocCompositeUtil  
  Gauge as linkPeriodicStatisticsRemCompositeUtil  
  Gauge as linkPeriodicStatisticsLocBufferUtil  
  Gauge as linkPeriodicStatisticsRemBufferUtil  
  Counter as linkPeriodicStatisticsLocRetransmits  
  Counter as linkPeriodicStatisticsRemRetransmits  
  INTEGER as linkPeriodicStatisticsLocLineAlarms  
  INTEGER as linkPeriodicStatisticsRemLineAlarms  
  INTEGER as linkPeriodicStatisticsLocTimeInSysFlowCtrl  
  INTEGER as linkPeriodicStatisticsRemTimeInSysFlowCtrl  
  INTEGER as linkPeriodicStatisticsLocTimeInSyncLossOrX21Connect  
  INTEGER as linkPeriodicStatisticsRemTimeInSyncLoss  
  INTEGER as linkPeriodicStatisticsLocTimeInCarrierLoss  
  INTEGER as linkPeriodicStatisticsRemTimeInCarrierLoss  

LinkFRPeriodicStatisticsEntry  
SEQUENCE    
  INTEGER as linkFRPeriodicStatisticsCardNumber  
  INTEGER as linkFRPeriodicStatisticsChannelNumber  
  INTEGER as linkFRPeriodicStatisticsMonth  
  INTEGER as linkFRPeriodicStatisticsDay  
  INTEGER as linkFRPeriodicStatisticsHours  
  INTEGER as linkFRPeriodicStatisticsMinutes  
  INTEGER as linkFRPeriodicStatisticsSeconds  
  Counter as linkFRPeriodicStatisticsCRCErrs  
  Counter as linkFRPeriodicStatisticsLostStatusMsgCounts  
  Counter as linkFRPeriodicStatisticsStatusMsgProtocolErrs  
  Counter as linkFRPeriodicStatisticsNetworkResets  
  Counter as linkFRPeriodicStatisticsLinkResets  
  INTEGER as linkFRPeriodicStatisticsNumOfDLCIs  

LinkFRDLCIPeriodicStatisticsEntry  
SEQUENCE    
  INTEGER as linkFRDLCIPeriodicStatisticsCardNumber  
  INTEGER as linkFRDLCIPeriodicStatisticsChannelNumber  
  INTEGER as linkFRDLCIPeriodicStatisticsDLCINumber  
  INTEGER as linkFRDLCIPeriodicStatisticsMonth  
  INTEGER as linkFRDLCIPeriodicStatisticsDay  
  INTEGER as linkFRDLCIPeriodicStatisticsHours  
  INTEGER as linkFRDLCIPeriodicStatisticsMinutes  
  INTEGER as linkFRDLCIPeriodicStatisticsSeconds  
  Counter as linkFRDLCIPeriodicStatisticsTxCharacters  
  Counter as linkFRDLCIPeriodicStatisticsRxCharacters  
  Counter as linkFRDLCIPeriodicStatisticsTxFrames  
  Counter as linkFRDLCIPeriodicStatisticsRxFrames  
  INTEGER as linkFRDLCIPeriodicStatisticsTimeActive  
  INTEGER as linkFRDLCIPeriodicStatisticsTimeCongestedForward  
  INTEGER as linkFRDLCIPeriodicStatisticsTimeCongestedBackward  

SwPeriodicStatisticsEntry  
SEQUENCE    
  INTEGER as swPeriodicStatisticsClassNumber  
  INTEGER as swPeriodicStatisticsMonth  
  INTEGER as swPeriodicStatisticsDay  
  INTEGER as swPeriodicStatisticsHours  
  INTEGER as swPeriodicStatisticsMinutes  
  INTEGER as swPeriodicStatisticsSeconds  
  Counter as swPeriodicStatisticsNumOfSuccessfulConnects  
  Counter as swPeriodicStatisticsNumOfUnsuccessfulAttempts  
  INTEGER as swPeriodicStatisticsMaxNumInQueue  

LinkFRAccLnkPeriodicStatisticsEntry  
SEQUENCE    
  INTEGER as linkFRAccLnkPeriodicStatisticsCardNumber  
  INTEGER as linkFRAccLnkPeriodicStatisticsChannelNumber  
  INTEGER as linkFRAccLnkPeriodicStatisticsMonth  
  INTEGER as linkFRAccLnkPeriodicStatisticsDay  
  INTEGER as linkFRAccLnkPeriodicStatisticsHours  
  INTEGER as linkFRAccLnkPeriodicStatisticsMinutes  
  INTEGER as linkFRAccLnkPeriodicStatisticsSeconds  
  Gauge as linkFRAccLnkPeriodicStatisticsLocalCompositeUtilization  
  Gauge as linkFRAccLnkPeriodicStatisticsLocalBufferUtilization  
  Counter as linkFRAccLnkPeriodicStatisticsLocalLineAlarms  
  INTEGER as linkFRAccLnkPeriodicStatisticsLocalSecInSysFlowControl  
  INTEGER as linkFRAccLnkPeriodicStatisticsLocalSecInSyncLoss  
  INTEGER as linkFRAccLnkPeriodicStatisticsLocalSecInCarrierLoss  

ChAccumStatisticsEntry  
SEQUENCE    
  INTEGER as chAccumStatisticsCardNumber  
  INTEGER as chAccumStatisticsChannelNumber  
  INTEGER as chAccumStatisticsMonth  
  INTEGER as chAccumStatisticsDay  
  INTEGER as chAccumStatisticsHours  
  INTEGER as chAccumStatisticsMinutes  
  INTEGER as chAccumStatisticsSeconds  
  Gauge as chAccumStatisticsBuffUtilization  
  INTEGER as chAccumStatisticsChannelBusiedOut  
  INTEGER as chAccumStatisticsChannelInFlowControl  

ChVAccumStatisticsEntry  
SEQUENCE    
  INTEGER as chVAccumStatisticsCardNumber  
  INTEGER as chVAccumStatisticsChannelNumber  
  INTEGER as chVAccumStatisticsMonth  
  INTEGER as chVAccumStatisticsDay  
  INTEGER as chVAccumStatisticsHours  
  INTEGER as chVAccumStatisticsMinutes  
  INTEGER as chVAccumStatisticsSeconds  
  INTEGER as chVAccumStatisticsConnectTime  
  Counter as chVAccumStatisticsTotalCalls  
  INTEGER as chVAccumStatisticsAvgCallDuration  
  INTEGER as chVAccumStatisticsBusyOutTime  
  Counter as chVAccumStatisticsNumOfCallAttempts  
  Counter as chVAccumStatisticsDiscardedFrameCounts  
  INTEGER as chVAccumStatisticsTimeInFaxMode  
  Gauge as chVAccumStatisticsPercentInFaxMode  

LinkAccumStatisticsEntry  
SEQUENCE    
  INTEGER as linkAccumStatisticsCardNumber  
  INTEGER as linkAccumStatisticsChannelNumber  
  INTEGER as linkAccumStatisticsMonth  
  INTEGER as linkAccumStatisticsDay  
  INTEGER as linkAccumStatisticsHours  
  INTEGER as linkAccumStatisticsMinutes  
  INTEGER as linkAccumStatisticsSeconds  
  INTEGER as linkAccumStatisticsLinkType  
  Counter as linkAccumStatisticsTxFrames  
  Counter as linkAccumStatisticsRxFrames  
  Gauge as linkAccumStatisticsLocCompositeUtil  
  Gauge as linkAccumStatisticsRemCompositeUtil  
  Gauge as linkAccumStatisticsLocBufferUtil  
  Gauge as linkAccumStatisticsRemBufferUtil  
  Counter as linkAccumStatisticsLocRetransmits  
  Counter as linkAccumStatisticsRemRetransmits  
  INTEGER as linkAccumStatisticsLocLineAlarms  
  INTEGER as linkAccumStatisticsRemLineAlarms  
  INTEGER as linkAccumStatisticsLocTimeInSysFlowCtrl  
  INTEGER as linkAccumStatisticsRemTimeInSysFlowCtrl  
  INTEGER as linkAccumStatisticsLocTimeInSyncLossOrX21Connect  
  INTEGER as linkAccumStatisticsRemTimeInSyncLoss  
  INTEGER as linkAccumStatisticsLocTimeInCarrierLoss  
  INTEGER as linkAccumStatisticsRemTimeInCarrierLoss  

LinkFRAccumStatisticsEntry  
SEQUENCE    
  INTEGER as linkFRAccumStatisticsCardNumber  
  INTEGER as linkFRAccumStatisticsChannelNumber  
  INTEGER as linkFRAccumStatisticsMonth  
  INTEGER as linkFRAccumStatisticsDay  
  INTEGER as linkFRAccumStatisticsHours  
  INTEGER as linkFRAccumStatisticsMinutes  
  INTEGER as linkFRAccumStatisticsSeconds  
  Counter as linkFRAccumStatisticsCRCErrs  
  Counter as linkFRAccumStatisticsLostStatusMsgCounts  
  Counter as linkFRAccumStatisticsStatusMsgProtocolErrs  
  Counter as linkFRAccumStatisticsNetworkResets  
  Counter as linkFRAccumStatisticsLinkResets  
  INTEGER as linkFRAccumStatisticsNumOfDLCIs  

LinkFRDLCIAccumStatisticsEntry  
SEQUENCE    
  INTEGER as linkFRDLCIAccumStatisticsCardNumber  
  INTEGER as linkFRDLCIAccumStatisticsChannelNumber  
  INTEGER as linkFRDLCIAccumStatisticsDLCINumber  
  INTEGER as linkFRDLCIAccumStatisticsMonth  
  INTEGER as linkFRDLCIAccumStatisticsDay  
  INTEGER as linkFRDLCIAccumStatisticsHours  
  INTEGER as linkFRDLCIAccumStatisticsMinutes  
  INTEGER as linkFRDLCIAccumStatisticsSeconds  
  Counter as linkFRDLCIAccumStatisticsTxCharacters  
  Counter as linkFRDLCIAccumStatisticsRxCharacters  
  Counter as linkFRDLCIAccumStatisticsTxFrames  
  Counter as linkFRDLCIAccumStatisticsRxFrames  
  INTEGER as linkFRDLCIAccumStatisticsTimeActive  
  INTEGER as linkFRDLCIAccumStatisticsTimeCongestedForward  
  INTEGER as linkFRDLCIAccumStatisticsTimeCongestedBackward  

SwAccumStatisticsEntry  
SEQUENCE    
  INTEGER as swAccumStatisticsClassNumber  
  INTEGER as swAccumStatisticsMonth  
  INTEGER as swAccumStatisticsDay  
  INTEGER as swAccumStatisticsHours  
  INTEGER as swAccumStatisticsMinutes  
  INTEGER as swAccumStatisticsSeconds  
  Counter as swAccumStatisticsNumOfCurrentConnects  
  Counter as swAccumStatisticsNumOfSuccessfulConnects  
  Counter as swAccumStatisticsNumOfUnsuccessfulAttempts  
  INTEGER as swAccumStatisticsMaxNumInQueue  

LinkFRAccLnkAccumStatisticsEntry  
SEQUENCE    
  INTEGER as linkFRAccLnkAccumStatisticsCardNumber  
  INTEGER as linkFRAccLnkAccumStatisticsChannelNumber  
  INTEGER as linkFRAccLnkAccumStatisticsMonth  
  INTEGER as linkFRAccLnkAccumStatisticsDay  
  INTEGER as linkFRAccLnkAccumStatisticsHours  
  INTEGER as linkFRAccLnkAccumStatisticsMinutes  
  INTEGER as linkFRAccLnkAccumStatisticsSeconds  
  Gauge as linkFRAccLnkAccumStatisticsLocalCompositeUtilization  
  Gauge as linkFRAccLnkAccumStatisticsLocalBufferUtilization  
  Counter as linkFRAccLnkAccumStatisticsLocalLineAlarms  
  INTEGER as linkFRAccLnkAccumStatisticsLocalSecInSysFlowControl  
  INTEGER as linkFRAccLnkAccumStatisticsLocalSecInSyncLoss  
  INTEGER as linkFRAccLnkAccumStatisticsLocalSecInCarrierLoss